configs/ls1043a-rdb: new defconfig

This is a reference design board for the NXP LS1043A SoC.

The config is heavily based on the ls1046a-frwy_defconfig.

see https://www.nxp.com/design/design-center/development-boards-and-designs/LS1043A-RDB

Signed-off-by: Akhilesh Nema <nemaakhilesh@gmail.com>
[Julien: remove extra white space in readme.txt]
Signed-off-by: Julien Olivain <ju.o@free.fr>

DEVELOPERS

@@ -75,6 +75,8 @@ F:	package/glorytun/
 N:	Akhilesh Nema <nemaakhilesh@gmail.com>
 F:	board/freescale/ls1046a-rdb/
 F:	configs/ls1046a-rdb_defconfig
+F:	board/freescale/ls1043a-rdb/
+F:	configs/ls1043a-rdb_defconfig
 
 N:	Alejandro González <alejandro.gonzalez.correo@gmail.com>
 F:	package/qprint/

board/freescale/ls1043a-rdb/genimage.cfg

@@ -0,0 +1,29 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition fsbl {
+		offset = 4K
+		in-partition-table = "no"
+		image = "bl2_sd.pbl"
+	}
+
+	partition ssbl {
+		offset = 1M
+		in-partition-table = "no"
+		image = "fip.bin"
+	}
+
+	partition fman {
+		offset = 9M
+		in-partition-table = "no"
+		image = "fsl_fman_ucode_ls1043_r1.1_108_4_9.bin"
+	}
+
+	partition rootfs {
+		offset = 16M
+		partition-type = 0x83
+		bootable = "true"
+		image = "rootfs.ext4"
+	}
+}

board/freescale/ls1043a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  f03dad74e5c3df8059554def03e9298b6fbd4ffdd3e940a18b7e84a60b12a37a  atf-lf-6.6.52-2.2.0.tar.gz

board/freescale/ls1043a-rdb/patches/linux-headers/linux-headers.hash

@@ -0,0 +1 @@
+../linux/linux.hash

board/freescale/ls1043a-rdb/patches/linux/linux.hash

@@ -0,0 +1,2 @@
+# Locally computed
+sha256  5665b927616a7e27e69f3f8fface6dd693b01f35d42ae4f9a0f0a10be3621487  linux-lf-6.6.52-2.2.0.tar.gz

board/freescale/ls1043a-rdb/patches/uboot/uboot.hash

@@ -0,0 +1,2 @@
+# Locally computed
+sha256  00fc7bd053de19d02c990b3aa214a27c6103f4306e756f3f6d4afb12314556e4  u-boot-lf-6.6.52-2.2.0.tar.gz

board/freescale/ls1043a-rdb/readme.txt

@@ -0,0 +1,85 @@
+***************
+NXP LS1043A-RDB
+***************
+
+This file documents the Buildroot support for the LS1043A Reference Design Board.
+
+for more details about the board and the QorIQ Layerscape SoC, see the following pages:
+  - https://www.nxp.com/design/design-center/development-boards-and-designs/LS1043A-RDB
+  - https://www.nxp.com/products/LS1043A
+
+for the NXP LDP (Linux Distribution POC), see
+  - https://www.nxp.com/design/design-center/software/embedded-software/linux-software-and-development-tools/layerscape-linux-distribution-poc:LAYERSCAPE-SDK
+
+the components provided by NXP are:
+  - rcw, lf-6.6.52-2.2.0
+  - atf (fork), lf-6.6.52-2.2.0
+  - uboot (fork), lf-6.6.52-2.2.0
+  - qoriq-fm-ucode (blob), lf-6.6.52-2.2.0
+  - linux (fork), lf-6.6.52-2.2.0
+
+Build
+=====
+
+First, configure Buildroot for the LS1043A-RDB board:
+
+  make ls1043a-rdb_defconfig
+
+Build all components:
+
+  make
+
+You will find in output/images/ the following files:
+  - bl2_sd.pbl
+  - fip.bin
+  - fsl_fman_ucode_ls1043_r1.1_106_4_18.bin
+  - fsl_fman_ucode_ls1043_r1.1_108_4_9.bin
+  - fsl-ls1043a-rdb.dtb
+  - fsl-ls1043a-rdb-sdk.dtb
+  - Image
+  - PBL.bin
+  - rootfs.ext2
+  - rootfs.ext4
+  - sdcard.img
+  - u-boot.bin
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on a SD card. Launch the following
+command as root:
+
+  dd if=output/images/sdcard.img of=/dev/sdX
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/freescale/ls1043a-rdb/genimage.cfg.
+
+Boot the LS1043A-ARDB board
+===========================
+
+To boot your newly created system:
+- insert the SD card in the SD slot of the board;
+- Configure the DIP switches
+  SW3[1:8] = 10110011
+  SW4[1:8] = 00100000
+  SW5[1:8] = 00100010
+  (SW5[1:8] and SW4[1] should be set to 001000000_0 for the SD card boot)
+- put a Micro-USB cable into the console port and connect using a terminal emulator
+  at 115200 bps, 8n1.
+- power on the board.
+
+Alternatively, SD card boot can also be selected from the uboot command prompt:
+- insert the SD card in the SD slot of the board;
+- put a Micro-USB cable into console Port and connect using a terminal emulator
+- power on the board.
+- press any key to stop at the uboot command prompt.
+- run the following uboot command
+  => cpld reset sd

board/freescale/ls1043a-rdb/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -0,0 +1,4 @@
+label ls1043ardb-buildroot
+  kernel /boot/Image
+  devicetree /boot/fsl-ls1043a-rdb-sdk.dtb
+  append console=ttyS0,115200 root=/dev/mmcblk0p1 earlycon=uart8250,mmio,0x21c0500 rootwait

configs/ls1043a-rdb_defconfig

@@ -0,0 +1,43 @@
+BR2_aarch64=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
+BR2_GLOBAL_PATCH_DIR="board/freescale/ls1043a-rdb/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_TARGET_GENERIC_HOSTNAME="ls1043ardb"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_SYSTEM_DHCP="eth0"
+BR2_ROOTFS_OVERLAY="board/freescale/ls1043a-rdb/rootfs_overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1043a-rdb/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.6.52-2.2.0)/linux-lf-6.6.52-2.2.0.tar.gz"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1043a-rdb freescale/fsl-ls1043a-rdb-sdk"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_PACKAGE_QORIQ_FM_UCODE=y
+BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM="ls1043"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.6.52-2.2.0)/atf-lf-6.6.52-2.2.0.tar.gz"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1043ardb"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.6.52-2.2.0)/u-boot-lf-6.6.52-2.2.0.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1043ardb_tfa"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_QORIQ_RCW=y
+BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin"