configs/friendlyarm_nanopi_neo_defconfig: new defconfig

This patch adds a new defconfig for the NanoPi NEO board made by
FriendlyARM. This board is based on the Allwinner H3 SoC.

See: https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO

This patch uses the mainline kernel and u-boot for the board.

The configurations are based on the previously dropped defconfig
maintained by Yann E. MORIN <yann.morin.1998@free.fr>.

Signed-off-by: Dong Wang <wangdong115@foxmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/friendlyarm/nanopi-neo/extlinux.conf

@@ -0,0 +1,4 @@
+label NanoPi NEO linux
+  kernel /boot/zImage
+  devicetree /boot/sun8i-h3-nanopi-neo.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait panic=10

board/friendlyarm/nanopi-neo/genimage.cfg

@@ -0,0 +1,17 @@
+# Minimal SD card image for the NanoPi NEO.
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = false
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+		size = 1000K # 1MB - 8KB(offset) - 16KB(GPT)
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}

board/friendlyarm/nanopi-neo/patches/linux-headers/linux-headers.hash

@@ -0,0 +1 @@
+../linux/linux.hash

board/friendlyarm/nanopi-neo/patches/linux/linux.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  93218296934915636fe6ba08e125948424cc270fd8948502c0ab91087a9fccd8  linux-6.6.44.tar.xz

board/friendlyarm/nanopi-neo/patches/uboot/uboot.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2

board/friendlyarm/nanopi-neo/post-build.sh

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname "$0")"
+
+install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf

board/friendlyarm/nanopi-neo/readme.txt

@@ -0,0 +1,41 @@
+Nanopi NEO
+
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the NanoPi NEO. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+FriendlyARM Nanopi NEO link:
+https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO
+
+How to build
+============
+
+    $ make friendlyarm_nanopi_neo_defconfig
+    $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+  $ sudo sync
+
+Insert the micro SD card in your Nanopi NEO and power it up. The console
+is on the debug TTL UART, 115200 8N1.
+
+Ethernet
+==========
+
+  # udhcpc -i eth0
+
+Enjoy!