Add a defconfig for MIPS Creator CI20

MIPS Creator CI20 is a Linux and Android development system from
MIPS/Imagination Technologies. It incorporates an Ingenic JZ4780 SoC
which includes a 1.2GHz dual core MIPS32 processor and Imagination
PowerVR SGX540 GPU.

More information can be found at:
  http://elinux.org/MIPS_Creator_CI20

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/ci20/readme.txt

@@ -0,0 +1,42 @@
+*********************
+* MIPS Creator CI20 *
+*********************
+
+The 'ci20_defconfig' will create a root filesystem and a kernel image
+under the 'output/images/' directory. This document will try to explain how
+to use them in order to run Buildroot in the MIPS Creator CI20 board.
+
+Assuming you are at the U-Boot prompt of the MIPS Creator CI20, you have to
+load the generated kernel image by using the 'tftpboot' command. In
+order to do that, you will need to get the network working. Here you
+have the instructions to set the ip address, netmask and gateway:
+
+  setenv ipaddr x.x.x.x
+  setenv netmask x.x.x.x
+  setenv gatewayip x.x.x.x
+
+Now you have to set the ip for the TFTP server you are going to load the
+kernel image from, and also the name of the kernel image file (we use
+'uImage' as a filename in this example):
+
+  setenv serverip x.x.x.x
+  setenv bootfile uImage
+
+And finally load the kernel image:
+
+  tftpboot
+
+Now you have to extract the generated root filesystem into a USB drive
+or SD-Card. Here you have the instructions to boot from the two of them.
+You have to choose the one your prefer:
+
+From USB
+  setenv bootargs console=ttyS4,115200 console=tty0 mem=256M@0x0
+mem=768M@0x30000000 root=/dev/sda1
+
+From SD-Card
+  setenv bootargs console=ttyS4,115200 console=tty0 mem=256M@0x0
+mem=768M@0x30000000 root=/dev/mmcblk0p1
+
+And finally run this command to boot the board:
+  bootm