configs/kontron_pitx_imx8m: remove defconfig, broken

This defconfig no longer builds:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/11012273666

It has been broken for over 2 months:

  https://gitlab.com/buildroot.org/buildroot/-/jobs?name=T%3Dkontron_pitx_imx8m&kind=BUILD

Unless a fix is provided, this defconfig will be removed.

Cc: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-By: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/kontron/pitx-imx8m/extlinux.conf

@@ -1,4 +0,0 @@
-label buildroot
-  kernel /boot/Image
-  devicetree /boot/freescale/imx8mq-kontron-pitx-imx8m.dtb
-  append root=PARTUUID=%PARTUUID% rootwait rw

board/kontron/pitx-imx8m/genimage.cfg

@@ -1,17 +0,0 @@
-image sdcard.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition imx-boot {
-		in-partition-table = "no"
-		image = "flash.bin"
-		offset = 33K
-	}
-
-	partition rootfs {
-		offset = 8M
-		image = "rootfs.ext4"
-		partition-uuid = %PARTUUID%
-	}
-}

board/kontron/pitx-imx8m/patches/uboot/2022.04/0001-tools-mkeficapsule-use-pkg-config-to-get-luuid-and-l.patch

@@ -1,33 +0,0 @@
-From f3523977e8f5f6b2173708777001332431ebc609 Mon Sep 17 00:00:00 2001
-From: Heiko Thiery <heiko.thiery@gmail.com>
-Date: Tue, 19 Jul 2022 16:17:09 +0200
-Subject: [PATCH 1/2] tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls
-
-Instead of hardcoding -luuid -lgnutls as the flags needed to build
-mkeficapsule, use pkg-config when available.
-
-We gracefully fallback on the previous behavior of hardcoding -luuid
--lgnutls if pkg-config is not available or fails with an error.
-
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
----
- tools/Makefile | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/tools/Makefile b/tools/Makefile
-index 9f2339666a..9f6b282ad8 100644
---- a/tools/Makefile
-+++ b/tools/Makefile
-@@ -242,7 +242,8 @@ hostprogs-$(CONFIG_MIPS) += mips-relocs
- hostprogs-$(CONFIG_ASN1_COMPILER)	+= asn1_compiler
- HOSTCFLAGS_asn1_compiler.o = -idirafter $(srctree)/include
- 
--HOSTLDLIBS_mkeficapsule += -lgnutls -luuid
-+HOSTLDLIBS_mkeficapsule += \
-+	$(shell pkg-config --libs gnutls uuid 2> /dev/null || echo "-lgnutls -luuid")
- hostprogs-$(CONFIG_TOOLS_MKEFICAPSULE) += mkeficapsule
- 
- # We build some files with extra pedantic flags to try to minimize things
--- 
-2.30.2
-

board/kontron/pitx-imx8m/post-build.sh

@@ -1,7 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-PARTUUID="$($HOST_DIR/bin/uuidgen)"
-
-install -d "$TARGET_DIR/boot/extlinux/"
-sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
-sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"

board/kontron/pitx-imx8m/readme.txt

@@ -1,74 +0,0 @@
-Kontron pitx-imx8m
-==================
-
-https://www.kontron.com/produkte/pitx-imx8m/p155258
-
-
-How to build it
-===============
-
-Configure buildroot:
-
-  $ make kontron_pitx_imx8m_defconfig
-
-Change settings to fit your needs (optional):
-
-  $ make menuconfig
-
-Compile everything and buildr the rootfs image:
-
-  $ make
-
-
-Result of the build
-===================
-
-After building, the output/images directory contains:
-
-  output/images/
-    ├── bl31.bin
-    ├── boot.scr
-    ├── ddr_fw.bin
-    ├── Image
-    ├── imx8-boot-sd.bin
-    ├── imx8mq-kontron-pitx-imx8m.dtb
-    ├── lpddr4_pmu_train_fw.bin
-    ├── rootfs.ext2
-    ├── rootfs.ext4 -> rootfs.ext2
-    ├── rootfs.tar
-    ├── sdcard.img
-    ├── signed_hdmi_imx8m.bin
-    ├── u-boot.bin
-    ├── u-boot.itb
-    ├── u-boot-nodtb.bin
-    ├── u-boot-spl.bin
-    └── u-boot-spl-ddr.bin
-
-
-Flashing the SD card image
-==========================
-
-To install the image on a SDCard simply copy sdcard.img to the storage (e.g. SD, eMMC)
-
-  $ sudo dd if=output/images/sdcard.img of=<your-sd-device>
-
-
-Preparing the board
-===================
-
- * Connect a serial line to the board
- * Insert the SD card
- * Make sure the boot source selection DIP switches are set correctly
-  * SW1 1-4 OFF
-  * SW1 2-3 OFF
- * Power-up the board
-
-
-Booting the board
-=================
-
-By default the bootloader will search for the first valid image, starting
-with the internal eMMC. To make sure the bootloader loads bootscript from
-the correct location (SD card) set the boot_targets environment variable:
-
-  $ setenv boot_targets mmc1