diff --git a/board/aspeed/ast2500-evb/genimage.cfg b/board/aspeed/ast2500-evb/genimage.cfg
new file mode 100644
index 0000000000..498a71e4d7
--- /dev/null
+++ b/board/aspeed/ast2500-evb/genimage.cfg
@@ -0,0 +1,40 @@
+#
+# This config reproduces the OpenBMC flash layout defined in Linux :
+#
+#    arch/arm/boot/dts/openbmc-flash-layout.dtsi
+#
+# and included by aspeed-ast2500-evb.dts
+#
+flash nor-32M-256 {
+	pebsize = 4K
+	numpebs = 8K
+	minimum-io-unit-size = 256
+}
+
+image flash.img {
+	flash {
+	}
+	flashtype = "nor-32M-256"
+
+	partition uboot {
+		image = "u-boot.bin"
+		size = 384K
+	}
+
+	partition ubootenv {
+		/* TODO */
+		offset = 384K
+		size = 128K
+	}
+
+	partition fitimage {
+		image = "image.itb"
+		offset = 512K
+		size = 4352K
+	}
+
+	partition spare {
+		offset = 4864K
+		size = 27904K
+	}
+}
diff --git a/board/aspeed/ast2500-evb/linux.fragment b/board/aspeed/ast2500-evb/linux.fragment
new file mode 100644
index 0000000000..1cee95f842
--- /dev/null
+++ b/board/aspeed/ast2500-evb/linux.fragment
@@ -0,0 +1,7 @@
+CONFIG_KERNEL_XZ=y
+CONFIG_ARCH_MULTI_V7=n
+CONFIG_MACH_ASPEED_G6=n
+CONFIG_SMP=n
+CONFIG_EXT4_FS=n
+CONFIG_DEBUG_FS=n
+CONFIG_SUSPEND=n
diff --git a/board/aspeed/ast2500-evb/readme.txt b/board/aspeed/ast2500-evb/readme.txt
new file mode 100644
index 0000000000..f509be553b
--- /dev/null
+++ b/board/aspeed/ast2500-evb/readme.txt
@@ -0,0 +1,80 @@
+Aspeed AST2500 EVB
+
+Introduction
+============
+
+The AST2500 EVB is an evaluation board for the AST2500 SoC, most
+commonly used as a Server Management Processor. It includes an 800MHz
+ARM11 processor with DDR3 or DDR4 SDRAM (up to 1GB), SPI flash memory
+devices for BMC and host firmwares and numerous controllers to drive
+the server board.
+
+  https://www.aspeedtech.com/server_ast2500/
+
+How to build it
+===============
+
+Configure buildroot:
+
+  $ make aspeed_ast2500evb_defconfig
+
+Compile everything and build the rootfs image:
+
+  $ make
+
+Result of the build
+===================
+
+After building, the output/images directory contains:
+
+  output/images/
+    ├── aspeed-ast2500-evb.dtb
+    ├── flash.img
+    ├── image.itb
+    ├── rootfs.cpio
+    ├── rootfs.cpio.xz
+    ├── rootfs.tar
+    ├── u-boot.bin
+    └── zImage
+
+Flashing the image
+==================
+
+To update the contents of the first flash device, copy flash.img :
+
+  $ flashcp flash.img /dev/mtd0
+
+or simply the boot loader:
+
+  $ flashcp u-boot.bin /dev/mtd1
+
+Preparing the board
+===================
+
+ * Connect a serial line to the board
+ * Power-up the board
+
+Booting the board
+=================
+
+The AST2500 EVB boots from the SPI flash device directly and loads a
+first bootloader (usually U-Boot). U-Boot will attempt to load a Linux
+kernel from the same flash device by default but other storage could
+be used.
+
+ * from U-Boot
+
+   The FIT image image.itb can be used to boot the board from U-Boot
+   using tftp
+
+ * with QEMU
+
+   $ qemu-system-arm -M ast2500-evb \
+	-drive file=output/images/flash.img,format=raw,if=mtd \
+	-nographic
+
+   $ qemu-system-arm -M ast2500-evb \
+	-kernel output/images/zImage \
+	-initrd output/images/rootfs.cpio \
+	-dtb output/images/aspeed-ast2500-evb.dtb \
+	-nographic
diff --git a/board/aspeed/ast2500-evb/uboot.fragment b/board/aspeed/ast2500-evb/uboot.fragment
new file mode 100644
index 0000000000..8463252e59
--- /dev/null
+++ b/board/aspeed/ast2500-evb/uboot.fragment
@@ -0,0 +1,3 @@
+CONFIG_BOOTCOMMAND="bootm 20080000"
+CONFIG_FIT=y
+CONFIG_SHA256=y
diff --git a/configs/aspeed_ast2500evb_defconfig b/configs/aspeed_ast2500evb_defconfig
new file mode 100644
index 0000000000..c969f18d07
--- /dev/null
+++ b/configs/aspeed_ast2500evb_defconfig
@@ -0,0 +1,43 @@
+# Architecture
+BR2_arm=y
+
+# System
+BR2_TARGET_GENERIC_HOSTNAME="aspeed-evb"
+BR2_TARGET_GENERIC_ISSUE="Aspeed EVB"
+BR2_SYSTEM_DHCP="eth0"
+
+# Filesystem
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_XZ=y
+
+# Image
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/aspeed/common/post-image.sh"
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.17.7"
+BR2_LINUX_KERNEL_DEFCONFIG="aspeed_g5"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/aspeed/ast2500-evb/linux.fragment"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="aspeed-ast2500-evb"
+BR2_LINUX_KERNEL_XZ=y
+
+# Boot
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="evb-ast2500"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=ast2500-evb"
+BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/aspeed/ast2500-evb/uboot.fragment"
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+
+# Target tools
+BR2_PACKAGE_MTD=y