configs/rock64: remove defconfig, broken

This defconfig no longer builds:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/11026769723

It has been broken for at least 2 months:

  https://gitlab.com/buildroot.org/buildroot/-/jobs?name=T%3Drock64&kind=BUILD

The old u-boot-2020.07-rc4 no longer builds.

Unless a fix is provided, this defconfig will be removed.

Fixes:

    https://gitlab.com/buildroot.org/buildroot/-/jobs/11026769723

Cc: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 83af501540)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>

.checkpackageignore

@@ -49,8 +49,6 @@ board/orangepi/orangepi-zero/patches/linux/0001-ARM-dts-orange-pi-zero-interrupt
 board/orangepi/orangepi-zero/patches/linux/0002-ARM-dts-orange-pi-zero-enable-spi-nor.patch lib_patch.Upstream
 board/orangepi/orangepi-zero/patches/linux/0003-ARM-dts-orange-pi-zero-enable-spidev.patch lib_patch.Upstream
 board/orangepi/orangepi-zero/patches/linux/0004-ARM-dts-orange-pi-zero-enable-uart.patch lib_patch.Upstream
-board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch lib_patch.Upstream
-board/pine64/rock64/post-build.sh Shellcheck
 board/qemu/aarch64-sbsa/assemble-flash-images Shellcheck
 board/qemu/x86/post-build.sh Shellcheck
 board/qemu/x86_64/post-build.sh Shellcheck
@@ -182,7 +180,6 @@ configs/pc_x86_64_efi_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_pinecube_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_star64_defconfig lib_defconfig.ForceCheckHash
-configs/rock64_defconfig lib_defconfig.ForceCheckHash
 configs/rock_pi_n8_defconfig lib_defconfig.ForceCheckHash
 configs/roseapplepi_defconfig lib_defconfig.ForceCheckHash
 configs/s6lx9_microboard_defconfig lib_defconfig.ForceCheckHash

DEVELOPERS

@@ -2404,8 +2404,6 @@ F:	package/rcw-smarc-sal28/
 
 N:	Michał Łyszczek <michal.lyszczek@bofc.pl>
 F:	board/altera/socrates_cyclone5/
-F:	board/pine64/rock64
-F:	configs/rock64_defconfig
 F:	configs/socrates_cyclone5_defconfig
 F:	package/netifrc/
 F:	package/openrc/

board/pine64/rock64/extlinux.conf

@@ -1,4 +0,0 @@
-label rock64-buildroot
-  kernel /boot/Image
-  devicetree /boot/rk3328-rock64.dtb
-  append console=ttyS2,1500000n8 root=/dev/mmcblk0p1 ro rootwait

board/pine64/rock64/genimage.cfg

@@ -1,23 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition uboot-spl {
-		in-partition-table = "no"
-		image = "u-boot-tpl-spl.img"
-		offset = 32K # 512 * 0x40 from start of sd card
-	}
-
-	partition uboot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 256K # 512 * 0x200 from start of sd card
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		bootable = "yes"
-		image = "rootfs.ext2"
-		size = 500M
-	}
-}

board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch

@@ -1,34 +0,0 @@
-From d312c4e40bf816823bdcfd066dd2511b23e83c9c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Micha=C5=82=20=C5=81yszczek?= <michal.lyszczek@bofc.pl>
-Date: Tue, 5 Feb 2019 22:08:54 +0100
-Subject: [PATCH] Makefile: rk3328 needs itb image to boot properly
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
-[Dario: make the patch to be applied with fuzz factor 0]
-Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
----
- Makefile | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Makefile b/Makefile
-index 149f83994814..ebbdf2596b9b 100644
---- a/Makefile
-+++ b/Makefile
-@@ -923,6 +923,11 @@ ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy)
- ALL-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
- endif
- 
-+# rk3328 needs itb image to boot properly
-+ifeq ($(CONFIG_ROCKCHIP_RK3328),y)
-+ALL-y += u-boot.itb
-+endif
-+
- # Build a combined spl + u-boot image for sunxi
- ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
- ALL-y += u-boot-sunxi-with-spl.bin
--- 
-2.43.0
-

board/pine64/rock64/post-build.sh

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname $0)"
-
-$MKIMAGE -n rk3328 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
-cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl.bin > $BINARIES_DIR/u-boot-tpl-spl.img
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf

board/pine64/rock64/readme.txt

@@ -1,95 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Rock64. With this default configuration you
-can log in into board via uart and look around.
-
-Board homepage: https://www.pine64.org/?page_id=7147
-
-Build
-=====
-
-First, load rock64 config for buildroot
-
-  $ make rock64_defconfig
-
-Optionally make changes to buildroot config (to install more programs)
-
-  $ make menuconfig
-
-And then build everything
-
-  $ make
-
-When completed, following files will be generated in output/images directory:
-
-  .
-  ├── Image
-  ├── bl31.bin
-  ├── bl31.elf
-  ├── rk3328-rock64.dtb
-  ├── rootfs.ext2
-  ├── rootfs.ext4 -> rootfs.ext2
-  ├── rootfs.tar
-  ├── sdcard.img
-  ├── u-boot-spl.bin
-  ├── u-boot-tpl-spl.img
-  ├── u-boot-tpl.bin
-  ├── u-boot-tpl.img
-  ├── u-boot.bin
-  └── u-boot.itb
-
-Creating bootable SD card
-=========================
-
-!!! THIS COMMAND MAY WIPE YOUR DISK!
-!!! MAKE SURE YOU PASSED CORRECT DEVICE!
-!!! OR IT THIS WILL WIPE YOUR DISK!
-
-Simply invoke (as root)
-
-  # dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device (not partition), of= argument may also be
-/dev/mmcblk0 if you are using built-in sd card reader.
-
-Runtime
-=======
-
-Login
------
-
-By default, buildroot has no password, just type 'root' as login user, and
-you will be logged in.
-
-Serial console
---------------
-
-Serial console needs to be connected to pins (into 40pin rpi compatible part)
-
-pin 6:  gnd
-pin 8:  tx
-pin 10: rx
-
-Pin numbers are printed on board.
-
-Uart configuration is not standard. Rock64 uses 1500000 (1,5M) baudrate
-with standard 8n1.
-
-Ethernet
---------
-
-To enable ethernet you need to load modules for it:
-
-# modprobe stmmac
-# modprobe dwmac-rk
-
-and since by default there is no dhcp installed, you need to configure ip
-address, remember to change address to fit your network.
-
-# ifconfig eth0 up
-# ip addr add 10.1.1.180/24 dev eth0
-# ping 10.1.1.1
-PING 10.1.1.1 (10.1.1.1): 56 data bytes
-64 bytes from 10.1.1.1: seq=0 ttl=64 time=0.695 ms

configs/rock64_defconfig

@@ -1,39 +0,0 @@
-BR2_aarch64=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-BR2_GLOBAL_PATCH_DIR="board/pine64/rock64/patches"
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS2"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rock64/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rock64/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.216"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-rock64"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.2"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="bl31/*.elf"
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/ayufan-rock64/linux-mainline-u-boot.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="release-2020-07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock64-rk3328"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin tpl/u-boot-tpl.bin"
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y