The xilpm_runtime_lib is not enabled by default in the versal2_plm Makefile:
97f2baf7f6/lib/sw_apps/versal_plm/src/versal_2ve_2vm/Makefile (L13)
Without it, there is a silent runtime failure.
Add config XILPM_RUNTIME_LIB=SUBSYS to make sure the xilpm_runtime_lib is
correctly configured and included to fix the problem.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Add support for Xilinx versal2 devices which include two new applications
for the xilinx-embeddedsw package.
BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_PLM
There is a new PLM (platform loader and manager) application for versal2
devices. The purpose of the PLM is to act as the bootloader for loading the
boot.pdi to configure the DDR memory and then loading arm-trusted-firmware and
u-boot on the Cortex-A78 core 0.
BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_ASUFW
Included with versal2 devices is a risc-v based security accelerator called
the ASU (application security unit). The ASUFW is the open-source application
which runs on the ASU.
Versal2 devices simplified the boot process by getting rid of the second
microblaze core called the PSM (processor system manager). There is thus no
longer a need for a separate psmfw application like with the original versal
devices, as this functionality is now fully included in the new PLM for
versal2.
For more information about the Xilinx Versal Gen2 series:
https://www.amd.com/en/products/adaptive-socs-and-fpgas/versal/gen2/ai-edge-series.htmlhttps://www.amd.com/en/products/adaptive-socs-and-fpgas/versal/gen2/prime-series.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch removes the support for the microblazeel-xilinx-elf arch tuple.
Users will now get an error message telling them to change their configuration
to the microblazeel-buildroot-elf arch tuple.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch renames the bare-metal toolchain vendor used by the
xilinx-embeddedsw package from Xilinx to Buildroot to be consistent with all
other toolchains built by Buildroot.
To build the Microblaze applications available with the xilinx-embeddedsw
package, the following config is now needed:
BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf"
This change keeps backwards compatibility for users already using the
following architecture tuple:
BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
Either vendor name is now valid, but there is a warning message to use the
Buildroot vendor name, and the support for the "microblazeel-xilinx-elf"
tuple will be removed once all zynqmp and versal defconfigs have migrated.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds a new boot package to Buildroot for building boot firmware
applications from the https://github.com/Xilinx/embeddedsw repo.
If a user chooses to build a boot firmware application, it will not be
installed by the xilinx-prebuilt package since it will come from the
xilinx-embeddedsw package. In this way, users can mix and match applications
to be built by the xilinx-embeddedsw package and applications to be copied
from the xilinx-prebuilt package. This is necessary for the versal platform
because the pdi file can only be built by AMD Vivado.
Support for additional applications in the https://github.com/Xilinx/embeddedsw
repo can always be added to this package as needed or requested.
The xilinx-embeddedsw package replaces previous solutions including
zynqmp-firmware, versal-firmware and xilinx-source.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Luca: Tested on Kria KV260 starter kit]
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
