This patch renames the bare-metal toolchain vendor used by the
xilinx-embeddedsw package from Xilinx to Buildroot to be consistent with all
other toolchains built by Buildroot.
To build the Microblaze applications available with the xilinx-embeddedsw
package, the following config is now needed:
BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf"
This change keeps backwards compatibility for users already using the
following architecture tuple:
BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
Either vendor name is now valid, but there is a warning message to use the
Buildroot vendor name, and the support for the "microblazeel-xilinx-elf"
tuple will be removed once all zynqmp and versal defconfigs have migrated.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
With the Segmented Configuration, the Versal PDI files will have new names:
<design>_boot.pdi - Minimal DDR and PS config for booting
<design>_pld.pdi - Remainder of FPGA design to be loaded at run-time
Since this will be the new default, this patch aligns the Buildroot file
naming by replacing the obscure vpl_gen_fixed.pdi filename with a simpler
boot.pdi filename.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
AMD has created a new segmented configuration for Versal products. It splits
the Vivado hardware design into two PDI files, one containing the minimal
required configuration for the DDR and booting the processors, and a second PDI
file which contains the rest of the FPGA design and can be loaded at run-time
via U-boot or Linux.
The file names generated when using the Vivado Segmented Configuration are as
follows:
<design>_boot.pdi - Minimal DDR and PS config for booting
<design>_pld.pdi - Remainder of FPGA design to be loaded at run-time
Since two PDI files will be included in the XSA file when using Segmented
Configuration, the xilinx-prebuilt package needs to be updated to support
this feature.
For Buildroot purposes, the <design>_boot.pdi is the file that needs to be
included in the boot.bin for booting the processors, so this patch checks
for a file named *boot*.pdi which will indicate that Segmented Configuration
is being used and will make sure to use the <design>_boot.pdi file and not
the <design>_pld.pdi file when generating the boot.bin image.
If no pdi files contain the word "boot" in the filename, it can be assumed
that Segmented Configuration is not being used, so the single file *.pdi
method is the appropriate one for this case, and this patch is thus
backwards compatible with prior designs not using Segmented Configuration.
Also, Segmented Configuration is going to become the default mode for Versal
products, so the xilinx-prebuilt github location will also soon have two PDI
files for each board. For this reason, this patch is also handling Segmented
Configuration for files downloaded from the xilinx-prebuilt repo.
For further information about the AMD Segmented Configuration, please see the
github tutorial below.
https://github.com/Xilinx/Vivado-Design-Tutorials/tree/2024.2/Versal/Boot_and_Config/Segmented_Configuration
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The versal vpl_gen_fixed.pdi file is not a target executable, so the file
permissions should be 644 instead of 755.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
CoolPi 4B is a rk3588s based SBC[0].
Specification:
- Rockchip RK3588S
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet drived by PCIE with RTL8111HS
- HDMI Type D out
- Mini DP out
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- WIFI/BT module AIC8800
- 40 pin header
[0] https://www.cool-pi.com/product/cp4b/
Signed-off-by: Andy Yan <andyshrk@163.com>
[Julien:
- add missing BR2_GLOBAL_PATCH_DIR and hash files
- add missing BR2_TARGET_UBOOT_NEEDS_GNUTLS
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since its inclusion in commit [1], the
BR2_PACKAGE_MENDER_UPDATE_MODULES_IPK config selects
BR2_PACKAGE_OPKG without propagating its dependencies on MMU and
wchar.
This commit fixes this issue.
Fixes:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_OPKG
Depends on [n]: BR2_USE_MMU [=y] && BR2_USE_WCHAR [=n]
Selected by [y]:
- BR2_PACKAGE_MENDER_UPDATE_MODULES_IPK [=y] && BR2_PACKAGE_MENDER_UPDATE_MODULES [=y]
[1] a474642fdc
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot commit [1] removed mysql and replaced it by mariadb in all
packages, but did not propagated all dependencies.
This commit fixes the issue.
Fixes:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_MARIADB
Depends on [n]: BR2_INSTALL_LIBSTDCPP [=y] && !BR2_STATIC_LIBS [=n] && BR2_USE_MMU [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y] && (BR2_TOOLCHAIN_HAS_ATOMIC [=n] || BR2_TOOLCHAIN_HAS_SYNC_8 [=n]) && BR2_USE_WCHAR [=y]
Selected by [y]:
- BR2_PACKAGE_DOVECOT_MYSQL [=y] && BR2_PACKAGE_DOVECOT [=y] && BR2_INSTALL_LIBSTDCPP [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y]
[1] 8708f3a23a
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit [1] "package/gstreamer1/gst1-plugins-bad: bump version
to 1.24.11" added new requirements for webrtc which selects the
sctp plugin, but forgot to propagate its dependencies. The sctp
plugin depends on BR2_TOOLCHAIN_HAS_SYNC_4.
This commit fixes this issue.
Fixes:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_SCTP
Depends on [n]: BR2_PACKAGE_GSTREAMER1 [=y] && BR2_PACKAGE_GST1_PLUGINS_BAD [=y] && BR2_TOOLCHAIN_HAS_SYNC_4 [=n]
Selected by [y]:
- BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_WEBRTC [=y] && BR2_PACKAGE_GSTREAMER1 [=y] && BR2_PACKAGE_GST1_PLUGINS_BAD [=y] && !BR2_STATIC_LIBS [=n]
[1] 90b3cfedf4
Cc: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since its introduction in commit [1], the podman package has a
dependency on a toolchain with headers >= 3.17, which was propagated
from libseccomp and slirp4netns. The podman package also selects
BR2_PACKAGE_SHADOW which has a requirement on toolchain with
headers >= 4.14. See [2]. This requirement should have been
propagated.
This commit fixes this issue.
Fixes:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_SHADOW
Depends on [n]: !BR2_STATIC_LIBS [=n] && BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_14 [=n]
Selected by [y]:
- BR2_PACKAGE_PODMAN [=y] && BR2_USE_MMU [=y] && BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS [=y] && BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS [=y] && BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS [=y] && BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS [=y] && BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_17 [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y] && BR2_USE_WCHAR [=y]
[1] ebbaac08e3
[2] f78c5cb5ca
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following autobuild error on configs with host GCC15.
```
/workdir/instance-0/output-1/host/bin/ccache /usr/bin/gcc -O2 -DNDEBUG -Wall -Wstrict-prototypes -Wundef -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -fno-strict-aliasing -Werror=declaration-after-statement -fno-builtin -fno-common -Werror=return-type -Wno-unused-local-typedefs -DHAVE_STDINT_H=1 -DHAVE_DIRENT_H=1 -DHAVE_SYS_DIR_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_TIMES_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIBDL=1 -DGX_COLOR_INDEX_TYPE="unsigned long long" -D__USE_UNIX98=1 -DHAVE_SNPRINTF -O2 -I/workdir/instance-0/output-1/host/include -L/workdir/instance-0/output-1/host/lib -Wl,-rpath,/workdir/instance-0/output-1/host/lib -DNOCONTRIB -DHAVE_RESTRICT=1 -DHAVE_LIMITS_H=1 -DHAVE_STRING_H=1 -fno-strict-aliasing -O2 -I/workdir/instance-0/output-1/host/include -L/workdir/instance-0/output-1/host/lib -Wl,-rpath,/workdir/instance-0/output-1/host/lib -DHAVE_POPEN_PROTO=1 -I./base -o ./obj/aux/genconf ./base/genconf.c -lz
In file included from ./base/genconf.c:18:
./base/stdpre.h:348:13: error: 'bool' cannot be defined via 'typedef'
348 | typedef int bool;
| ^~~~
./base/stdpre.h:348:13: note: 'bool' is a keyword with '-std=c23' onwards
./base/stdpre.h:348:1: warning: useless type name in empty declaration
348 | typedef int bool;
| ^~~~~~~
```
This is due to the change in the default C language version in GCC15.
The patch included is not exactly the same as the upstream one, it only
picks the part that fix the `bool` definition and dropped the declaration
type changes.
Fixes: https://autobuild.buildroot.org/results/9c6/9c6cbff256635c6ab4be4c5b7bf18f9d3c4b46681
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This test verifies that clinfo correctly detects the rustiCL platform
and llvmpipe as device.
We check:
- exit code,
- Platform name matches rusticl,
- Device name matches llvmpipe.
Signed-off-by: El Mehdi YOUNES <elmehdi.younes@smile.fr>
[Julien:
- rename file to test_mesa3d.py
- add Medhi in DEVELOPERS for this test file
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
RustiCL is an OpenCL implementation written entirely in
RUST and integrated into Mesa3D. It enables the use of OpenCL
programs on top of existing Gallium drivers. RustiCL is a
modern and maintainable replacement for the old C-implemention
Clover.
To build Rusticl in Mesa3D, the following components are required:
- host-rustc (Rust compiler)
- host-rust-bindgen (for generating bindings)
- spirv-tools
- spirv-llvm-translator (providing libLLVMSPIRVLib.so matching the LLVM version)
- LLVM built with libclc and -DLLVM_ENABLE_DUMP=ON
- Mesa headers via mesa-clc-bundle-headers=enabled
- There is a known meson bug and in order to fix it we set -Drust_std=2021, see:
https://docs.mesa3d.org/rusticl.html#known-issueshttps://github.com/mesonbuild/meson/issues/10664
More details in the Mesa documentation:
https://docs.mesa3d.org/rusticl.html
Rusticl is the provider of OpenCL in Buildroot.
However, Mesa does not provide the `libOpenCL.so` library itself.
We therefore depend on the `opencl-icd-loader` package to
install this loader in the toolchain sysroot, so that other
OpenCL-dependent packages can build and link against it.
Without the ICD loader, only `libRustiOpenCL.so` is available and
tools like `clinfo` or `clpeak` fail.
- 'Dmesa-clc-bundle-headers=enabled' ensures that the OpenCL header
files are bundled and available in the target. Without this,
runtime compilation of OpenCL kernels via clpeak or clinfo fails
with:
fatal error: 'opencl-c-base.h' file not found
see 3619611b31
We add a Rust compiler override to Meson to use Buildroot’s
host Rust toolchain using MESA3D_MESON_EXTRA_BINARIES.
Rusticl requires Meson to invoke rustc with the correct target and linker:
* 'rust=['$(HOST_DIR)/bin/rustc','--target=$(RUSTC_TARGET_NAME)']'
* 'rust_ld='$(TARGET_CROSS)gcc''
Another solution was proposed to set rust and rust_ld globally in
cross-compilation.conf, we prefer to define them locally within mesa
for now to ensure precise control over the rust toolchain behavior
during the Mesa build.
see https://lore.kernel.org/buildroot/ZcOeEMfwX4XlRXO7@landeda/
Currently, we should always use RUSTICL_ENABLE= driver to use rusticl.
More information:
https://docs.mesa3d.org/envvars.html#envvar-RUSTICL_ENABLE
Signed-off-by: El Mehdi YOUNES <elmehdi.younes@smile.fr>
[Julien: add references to meson bug]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This adds the OpenCL installable client driver (ICD) loader
which provides the 'libOpenCL.so' shared library needed to
run OpenCL programs.
Mesa3D can offer opencl implementations (such as rusticl),
but it does not provide 'libOpenCL.so'.
Without it, programs like 'clinfo' fail to build not
finding 'libOpenCL.so'.
see:
https://github.com/KhronosGroup/OpenCL-ICD-Loader
Signed-off-by: El Mehdi YOUNES <elmehdi.younes@smile.fr>
[Julien: add Medhi in DEVELOPERS for this package]
Signed-off-by: Julien Olivain <ju.o@free.fr>
go1.23.9 (released 2025-05-06) includes fixes to the runtime and the linker.
go1.23.10 (released 2025-06-05) includes security fixes to the net/http and
os packages, as well as bug fixes to the linker.
Fixes the following security vulnerabilities:
- CVE-2025-4673: net/http: sensitive headers not cleared on cross-origin
redirect
Proxy-Authorization and Proxy-Authenticate headers persisted on
cross-origin redirects potentially leaking sensitive information
- CVE-2025-0913: os: inconsistent handling of O_CREATE|O_EXCL on Unix and
Windows
os.OpenFile(path, os.O_CREATE|O_EXCL) behaved differently on Unix and
Windows systems when the target path was a dangling symlink. On Unix
systems, OpenFile with O_CREATE and O_EXCL flags never follows symlinks.
On Windows, when the target path was a symlink to a nonexistent location,
OpenFile would create a file in that location.
- CVE-2025-22874: crypto/x509: usage of ExtKeyUsageAny disables policy validation
Calling Verify with a VerifyOptions.KeyUsages that contains ExtKeyUsageAny
unintentionally disabled policy validation. This only affected
certificate chains which contain policy graphs, which are rather uncommon.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://github.com/jqlang/jq/releases/tag/jq-1.8.0
Fixes the following security issues:
- CVE-2024-23337: Fix signed integer overflow in jvp_array_write and jvp_object_rehash.
- CVE-2024-53427: Reject NaN with payload while parsing JSON.
- CVE-2025-48060: Fix heap buffer overflow in jv_string_vfmt.
- Fix use of uninitialized value in check_literal.
- Fix segmentation fault on strftime/1, strflocaltime/1.
- Fix unhandled overflow in @base64d.
COPYING hash changed due to the following commit.
9afc450930
Signed-off-by: Kadambini Nema <kadambini.nema@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following autobuild error that started appearing with host GCC15
configs.
```
/usr/bin/gcc -DHAVE_CONFIG_H -I. -I/workdir/instance-0/output-1/host/include -O2 -I/workdir/instance-0/output-1/host/include -c -o modules/arch/x86/x86arch.o modules/arch/x86/x86arch.c
In file included from modules/arch/x86/x86arch.h:30,
from modules/arch/x86/x86arch.c:31:
./libyasm/bitvect.h:86:32: error: cannot use keyword 'false' as enumeration constant
86 | typedef enum boolean { false = FALSE, true = TRUE } boolean;
| ^~~~~
./libyasm/bitvect.h:86:32: note: 'false' is a keyword with '-std=c23' onwards
```
This is due to the change in the default C language version in GCC15.
Fixes: https://autobuild.buildroot.org/results/d1d/d1d9a6e73c2ec278941dd90c6b07cce01b372feb/
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- The check was referencing an incorrect variable name
- In the `$(QORIQ_MC_UTILS_DPC_FILES) $(QORIQ_MC_UTILS_DPL_FILES)` case,
the target directory needs to be created first
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
MessagePack ships both in a C++ and a C variant. Add the latter to
Buildroot. This will be used by fluent-bit.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
[Julien:
- switch homepage URL to use https
- add a note in package/msgpack{,-c}/Config.in to clarify C/C++
variants
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
For change log, see:
https://gitlab.com/gpsd/gpsd/-/blob/release-3.26.1/NEWS
Support for RTCM104v2 and v3, as well as for ublox, are now
unconditionally built, so drop our corresponding options. No
needfor legacy options: users that had those enabled will
still get them.
Support for Oceanserver has been dropped upstream, so drop our
option and add legacy handling to infrom users they should
complain upstream if they needed it (very unlikely).
Also, a bug introduced in gpsd 3.26 makes the Buildroot gpsd runtime
test failing. See [1]. As a workaround, this commit also changes
this runtime test to emulate a gps over TCP, instead of UDP.
[1] https://gitlab.com/gpsd/gpsd/-/issues/337
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
[Julien:
- rebased on branch next
- add gpsd version removing OceanServer option in Config.in.legacy
- add link to NEWS in commit log
- switch test_gpsd to use tcp instead of udp
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Buildroot commit 600e75b606 "remove depends on architecture for Iris/
Vulkan" forgot to remove the dependency for the comment of the iris
driver.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Privilege separation mode is undesirable in some use cases.
Let's allow the user to disable it, at least.
Signed-off-by: Konstantin Menyaev <konstantin.menyaev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
If external clang is available on the host system, the buildsystem tries
to use it. The result will be unpredictable. We can't use the version of
clang that is shipped with buildroot either, because it is too old. See:
https://code.qt.io/cgit/qt/qttools.git/tree/.cmake.conf?h=6.8.1. So we
disable clang support in qt6tools for now.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
The previous commit removed its only user. It was a blind option so no
legacy handling is needed.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Since we don't need assistant, designer or linguist on target, and we
don't need assistant or designer on host, we unconditionally disable
these tools, to avoid build failures without inreasing the complexity of
the package.
Fixes target linguist build:
-- Could NOT find Qt6LinguistTools (missing: Qt6LinguistTools_DIR)
CMake Error at <...>/output/build/qt6base-6.8.1/cmake/QtToolHelpers.cmake:768 (message):
Failed to find the host tool "Qt6::lconvert". It is part of the
Qt6LinguistTools package, but the package could not be found. Make sure
you have built and installed the host Linguist module, which will ensure
the creation of the Qt6LinguistTools package.
Call Stack (most recent call first):
<...>/output/build/qt6base-6.8.1/cmake/QtToolHelpers.cmake:83 (qt_internal_find_tool)
src/linguist/lconvert/CMakeLists.txt:9 (qt_internal_add_tool)
The following defconfig triggers a target linguist build without
building the necessary lconvert host tool. See:
https://code.qt.io/cgit/qt/qttools.git/tree/src/linguist/CMakeLists.txt?h=6.8.1#n17
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_VFP=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_MUSL_STABLE=y
BR2_PACKAGE_QT6=y
BR2_PACKAGE_QT6BASE_GUI=y
BR2_PACKAGE_QT6BASE_PNG=y
BR2_PACKAGE_QT6BASE_WIDGETS=y
BR2_PACKAGE_QT6TOOLS=y
Fixes target designer build:
CMake Error at <...>/output/build/qt6base-6.8.1/cmake/QtPublicWalkLibsHelpers.cmake:267 (message):
The Xml target is mentioned as a dependency for Designer, but not declared.
Call Stack (most recent call first):
<...>/output/build/qt6base-6.8.1/cmake/QtPrlHelpers.cmake:8 (__qt_internal_walk_libs)
<...>/output/build/qt6base-6.8.1/cmake/QtPrlHelpers.cmake:47 (qt_collect_libs)
<...>/buildroot/output/build/qt6base-6.8.1/cmake/QtModuleHelpers.cmake:1027 (qt_generate_prl_file)
<...>/buildroot/output/build/qt6base-6.8.1/cmake/QtScopeFinalizerHelpers.cmake:24:EVAL:1 (qt_finalize_module)
src/designer/src/lib/CMakeLists.txt:DEFERRED
The following defconfig triggers a target designer build, without
selecting the necessary xml qt6base option. See:
https://code.qt.io/cgit/qt/qttools.git/tree/configure.cmake?h=6.8.1#n64https://code.qt.io/cgit/qt/qttools.git/tree/src/designer/src/lib/CMakeLists.txt?h=6.8.1#n182
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_VFP=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_MUSL_STABLE=y
BR2_PACKAGE_QT6=y
BR2_PACKAGE_QT6BASE_GUI=y
BR2_PACKAGE_QT6BASE_PNG=y
BR2_PACKAGE_QT6BASE_WIDGETS=y
BR2_PACKAGE_QT6TOOLS=y
Fixes target assistant build:
CMake Error at <...>/output/build/qt6base-6.8.1/cmake/QtToolHelpers.cmake:768 (message):
Failed to find the host tool "Qt6::qhelpgenerator". It is part of the
Qt6ToolsTools package, but the package did not contain the tool. Make sure
that the host module Tools was built with all features enabled (no
explicitly disabled tools).
Call Stack (most recent call first):
<...>/buildroot/output/build/qt6base-6.8.1/cmake/QtToolHelpers.cmake:83 (qt_internal_find_tool)
src/assistant/qhelpgenerator/CMakeLists.txt:9 (qt_internal_add_tool)
The following defconfig triggers a target assistant build, without
building the necessary qhelpgenerator host tool. See:
https://code.qt.io/cgit/qt/qttools.git/tree/configure.cmake?h=6.8.1#n45https://code.qt.io/cgit/qt/qttools.git/tree/src/assistant/CMakeLists.txt?h=6.8.1#n4https://code.qt.io/cgit/qt/qttools.git/tree/src/assistant/CMakeLists.txt?h=6.8.1#n21
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_VFP=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_MUSL_STABLE=y
BR2_PACKAGE_QT6=y
BR2_PACKAGE_QT6BASE_GUI=y
BR2_PACKAGE_QT6BASE_PNG=y
BR2_PACKAGE_QT6BASE_PRINTSUPPORT=y
BR2_PACKAGE_QT6BASE_SQL=y
BR2_PACKAGE_QT6BASE_SQLITE=y
BR2_PACKAGE_QT6BASE_WIDGETS=y
BR2_PACKAGE_QT6TOOLS=y
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
