Newer versions of the imx6ulpico board come populated with QCA9377
Wifi chip instad of BRCM4339.
Also install the QCA9377 firmware so that Wifi can work by default
on the newer board revisions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to U-Boot 2024.07 and kernel 6.6.48 versions.
The default U-Boot pico-imx6ul_defconfig causes the board to hang in SPL.
Fix it by chaging it to the more specific U-Boot
pico-pi-imx6ul_defconfig.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, 'cargo install' also installs a kind of "registry" in
/usr/.crates2.json and /usr/.crates.toml [0]:
To track information of installed executables, some extra files,
such as .crates.toml and .crates2.json, are also created under this
root.
Presumably, this would be used by "cargo uninstall" to properly cleanup
the package [1]:
By default all binaries are removed for a crate [...].
However, in the context of Buildroot, this is useless, as we do not
uninstall packages, and thus those files are superfluous.
Tell cargo to not create that tracking information, by using --no-track
to "cargo install".
Note that this would cause cargo to fail to install a file that already
exists [2], like would be the case when running foo-reinstall for example:
--no-track
By default, Cargo keeps track of the installed packages with a
metadata file stored in the installation root directory. This flag
tells Cargo not to use or create that file. With this flag, Cargo
will refuse to overwrite any existing files unless the --force flag
is used. This also disables Cargo’s ability to protect against
multiple concurrent invocations of Cargo installing at the same
time.
However, we do already use --force which allows cargo to overwrite
existing files without any further ado, so in our case, --no-track will
only disable the tracking information.
Also, in Buildroot, we do not have concurrent installation _to the same
location_: either PPD is disabled, in which case only one package will
be installed to the common target/ at a time, or we're using PPD, so
each package will get installed into its own target/. Thus, --no-track
has no adverse side effect for us.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/issues/17
[0] https://doc.rust-lang.org/cargo/reference/config.html#installroot
[1] https://doc.rust-lang.org/cargo/commands/cargo-uninstall.html
[2] https://doc.rust-lang.org/cargo/commands/cargo-install.html
Reported-by: Thomas Kindler @thomask77
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Thomas Kindler @thomask77
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an option to enable building and installing the MiniBrowser program
included in the WebKitGTK source tree. This may be handy now that Midori
will no longer be packaged in Builroot. A post-install hook installs a
symbolic link to it into /usr/bin for convenience.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
and update the two patches accordingly. Ejabberd now uses rebar3 by
default, so use the --with-rebar configure option to set the correct
rebar binary to use.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream project has been renamed from p1_yaml to fast_yaml. Use the
same name so packages that depends on it, find its content in the
fast_yaml/ directory.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The license hash has changed because of a year update at the beginning
of the file.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package has been renamed to avoid patching the packages that expect
to find its content in the xmpp/ directory. Thus, remove the
corresponding patch in the ejabberd package.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package has been renamed to avoid patching other packages that
expect to find its content in a fast_xml/ directory. Remove the
corresponding patch from the erlang-p1-xmpp package.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is renamed to avoid fixing other packages that expect to
find its content inside a stun/ directory instead of p1_stun/. Thus,
remove the corresponding patch from the erlang-p1-sip package.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Arm Trusted Firmware (TF-A) v2.11 fails to build in some situations
with the error message:
ld: build/qemu/release/bl1/bl1.elf: error: PHDR segment not covered by LOAD segment
This error can be reproduced with the commands:
make qemu_aarch64_ebbr_defconfig
utils/config --set-str BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE v2.11
make olddefconfig
make
This issue was reported in [1].
This error is coming from a check that was made more strict since
binutils ld 2.34. This error message is normally related to dynamic
linker, so it should normally not apply to a package like TF-A.
When BR2_SHARED_LIBS=y (shared libraries only) and BR2_PIC_PIE=y
(Build code with PIC/PIE), the Buildroot toolchain-wrapper will try
to enable position-independent code/executables. See [2]. This
configuration is a common default.
Arm Trusted Firmware (TF-A) build system, on its side, tries to detect
if the toolchain enables PIE automatically. It does so by checking if
--enable-default-pie is in the output of "$(CC) -v". If found, the TF-A
build system tries to disable PIE globally (it can be explicitly
enabled again with the ENABLE_PIE=1 build variable, in some specific
configurations). This detection mechanism is not working with the
Buildroot toolchain wrapper which is enabling PIE silently. See [3].
Commit 1061ed6c "boot/arm-trusted-firmware: add -fno-PIE to CFLAGS"
added the option -fno-PIE in CFLAGS for that reason. See [4].
TF-A >= v2.11 now needs the same treatment for LDFLAGS. This is
because TF-A switched the default linker from "ld" to "gcc", in
upstream commit [5]. This change makes the Buildroot toolchain wrapper
to enable PIE at link, without passing the "--no-dynamic-linker" option
that would normally avoids this ld error.
Also, even if there is no defconfigs using the
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_VERSION config directive, it is
worth mentioning that the Buildroot TF-A "latest version" was updated
to v2.11 in commit 9c50759cd "boot/arm-trusted-firmware: bump to
v2.11". See [6]. This latest version is the default choice. So
Buildroot is subject to generate this build failure. This can be
reproduced with the commands:
cat <<EOF >.config
BR2_aarch64=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="qemu"
BR2_TOOLCHAIN_EXTERNAL=y
EOF
make olddefconfig
make arm-trusted-firmware
This commit fixes the issue by adding the option "-no-pie" in LDFLAGS.
This will prevent the Buildroot toolchain wrapper to enable PIE, for
versions using "gcc" as a linker. This change should also remain
compatible with older TF-A < 2.11 using "ld" as a linker, since
"-no-pie" is also a valid ld option.
Fixes:
ld: build/qemu/release/bl1/bl1.elf: error: PHDR segment not covered by LOAD segment
[1] https://github.com/TrustedFirmware-A/trusted-firmware-a/issues/26
[2] https://gitlab.com/buildroot.org/buildroot/-/blob/2024.08-rc3/toolchain/toolchain-wrapper.c?ref_type=tags#L403
[3] https://git.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a.git/+/refs/tags/v2.11.0/Makefile#711
[4] 1061ed6c62
[5] 2f1c5e7eb1%5E%21/
[6] 9c50759cd1
Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
Tested-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add myself as maintainer so I can be notified of patches/problems/etc.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The "rgbmatrix" python module is the Python binding for
rpi-rgb-led-matrix, built from the same source repository.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
[yann.morin.1998@free.fr:
- add comment for propagated dependencies
- add comment on missing dependencies
- drop comment at end of _VERSION line
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The rpi-rgb-led-matrix project doesn't have tagged releases, so this
patch updates the package to the latest commit on the master branch.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
[yann.morin.1998@free.fr: drop comment at end of _VERSION line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
