Building at91bootstrap3 with GCC 15 fails with:
include/types.h:23:23: error: ‘bool’ cannot be defined via ‘typedef’
23 | typedef unsigned char bool;
| ^~~~
include/types.h:23:23: note: ‘bool’ is a keyword with ‘-std=c23’ onwards
This is due to GCC 15 defaulting to the C23 language dialect.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
LoongArch64 OVMF target is introduced to EDK2 in edk2-202408.
Enable architecture support here.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
loongarch64-efi target presents in GRUB can be utilised
by any EFI compatible LoongArch64 machine to boot kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
lpxelinux is like pxelinux, except it allows retrieving the files for
the kernel (with the KERNEL directive) and initrd (the path to initrd=
in the APPEND directive) from FTP or HTTP, rather than just from TFTP.
Using HTTP or FTP is musch faster than TFTP, so the boot time for big
kernels or big initrds is much shorter than with TFTP.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
[Julien: fix typo in commit title]
Signed-off-by: Julien Olivain <ju.o@free.fr>
syslinux is... special. It is a target package, but it is installed in
HOST_DIR *in the target install commands*: in addition to the boot files
that run on the target, syslinux installs a set of host tools that are
to be used at build time (e.g. extlinux, to prepare bootable media, like
an iso96660 image). Then, from HOST_DIR, the actual boot files are
copied into BINARIES_DIR (i.e. images/); we do it that way because the
boot files are scattered about everywhere in the build tree, while they
are all packed together in a single directory once installed.
However, there is no dependency between the target and image install
steps. So, when using top-level parallel builds, there is no guarantee
that the target install commands are finished before the image install
commands are started.
We fix that by first installing into a temporary location, as part of
the build step, and by then copying from there as part of the install
step. This ensures that the boot files are easily available, without
needing a dependency on the target install step, that we can't express.
Note that we do not change the actual installation into HOST_DIR: it can
be set up differently that our temporary location, and we do not want
to duplicate that setup here (it's going to diverge over time).
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
For release notes since edk2-stable202411, see:
https://github.com/tianocore/edk2/releases/tag/edk2-stable202502https://github.com/tianocore/edk2/releases/tag/edk2-stable202505
Note: the edk2-stable202505 release note mention a security fix.
This fix was already backported in Buildroot in a previous commit.
For that reason, this bump is not marked as securiy, and also
removes the backported patch and its associated _IGNORE_CVES entry.
Those versions include fixes when using gcc 15 (host and target).
This commit also updates the edk2-platforms and edk2-non-osi packages
with the last commit merged at the edk2 release date (2025-05-23).
In the case of edk2-platforms, the commit id used in this update
is few days later, to include a fix for the Arm Sgi575 platform.
Exact commit should have been [1] (to be exactly aligned to the edk2
tag date), but commit [2] is used instead. The package edk2-non-osi is
updated to commit [3].
Also, the SocioNext SynQuacer platforms (including the DeveloperBox)
were removed upstream in edk2-platforms commit [4]. This commit
reflect that change by removing those platforms choices and associated
runtime tests.
This commit has been runtime tested with tests using EDK2 package,
with commands:
support/testing/run-tests \
-d dl -o output_folder \
tests.boot.test_edk2 \
tests.boot.test_grub.TestGrubAArch64EFI \
tests.boot.test_grub.TestGrubi386EFI \
tests.boot.test_grub.TestGrubRiscV64EFI \
tests.boot.test_grub.TestGrubX8664EFI \
tests.fs.test_iso9660.TestIso9660Grub2EFI \
tests.fs.test_iso9660.TestIso9660Grub2Hybrid \
tests.package.test_fwts
It has also been runtime tested (by booting in qemu) with defconfigs
using EDK2 package:
qemu_aarch64_sbsa_defconfig
qemu_riscv64_virt_efi_defconfig
[1] 2bfe3fa99e
[2] 92f7d69e8a
[3] ea2040c2d4
[4] aaba5807f1
Cc: Dick Olsson <hi@senzilla.io>
Cc: Romain Naour <romain.naour@smile.fr>
Cc: Vincent Stehlé <vincent.stehle@arm.com>
Tested-by: Vincent Stehlé <vincent.stehle@arm.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since the comment about the xilinx-embeddedsw package needing a bare-metal
toolchain was moved to the start of the Config.in file, it is now printing
in make menuconfig for virtually all defconfigs.
By adding the same dependencies as the xilinx-embeddedsw package, the
comment will appear only when the xilinx-embeddedsw package is actually
selectable.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Now that all zynqmp and versal defconfigs have bumped to version
xilinx_v2025.1, the xilinx-embeddedsw default version can also be bumped
to xilinx_v2025.1.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Now that all versal defconfigs have been bumped to xilinx_v2025.1, this patch
bumps the xilinx-prebuilt default version to xilinx_v2025.1.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds support for version xilinx_v2025.1 without changing the
default version. This way, the zynqmp and versal defconfigs can bump
individually from xilinx_v2024.2 to xilinx_v2025.1.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds support for version xilinx_v2025.1 without changing the
default version. This way, the zynqmp and versal defconfigs can bump
individually from xilinx_v2024.2 to xilinx_v2025.1.
In addition, new software apps were added to the Xilinx/embedddedsw repo.
While they do not change the buildroot xilinx-embeddedsw boot package, the
version xilinx_v2025.1 has a new license.txt file. For this reason, this
patch adds a hash file for the xilinx_v2025.1 version, so that both the
default xilinx_v2024.2 and xilinx_v2025.1 versions will have independent
hashes for their license.txt files.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch removes the support for the microblazeel-xilinx-elf arch tuple.
Users will now get an error message telling them to change their configuration
to the microblazeel-buildroot-elf arch tuple.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch renames the bare-metal toolchain vendor used by the
xilinx-embeddedsw package from Xilinx to Buildroot to be consistent with all
other toolchains built by Buildroot.
To build the Microblaze applications available with the xilinx-embeddedsw
package, the following config is now needed:
BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf"
This change keeps backwards compatibility for users already using the
following architecture tuple:
BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
Either vendor name is now valid, but there is a warning message to use the
Buildroot vendor name, and the support for the "microblazeel-xilinx-elf"
tuple will be removed once all zynqmp and versal defconfigs have migrated.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
With the Segmented Configuration, the Versal PDI files will have new names:
<design>_boot.pdi - Minimal DDR and PS config for booting
<design>_pld.pdi - Remainder of FPGA design to be loaded at run-time
Since this will be the new default, this patch aligns the Buildroot file
naming by replacing the obscure vpl_gen_fixed.pdi filename with a simpler
boot.pdi filename.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
AMD has created a new segmented configuration for Versal products. It splits
the Vivado hardware design into two PDI files, one containing the minimal
required configuration for the DDR and booting the processors, and a second PDI
file which contains the rest of the FPGA design and can be loaded at run-time
via U-boot or Linux.
The file names generated when using the Vivado Segmented Configuration are as
follows:
<design>_boot.pdi - Minimal DDR and PS config for booting
<design>_pld.pdi - Remainder of FPGA design to be loaded at run-time
Since two PDI files will be included in the XSA file when using Segmented
Configuration, the xilinx-prebuilt package needs to be updated to support
this feature.
For Buildroot purposes, the <design>_boot.pdi is the file that needs to be
included in the boot.bin for booting the processors, so this patch checks
for a file named *boot*.pdi which will indicate that Segmented Configuration
is being used and will make sure to use the <design>_boot.pdi file and not
the <design>_pld.pdi file when generating the boot.bin image.
If no pdi files contain the word "boot" in the filename, it can be assumed
that Segmented Configuration is not being used, so the single file *.pdi
method is the appropriate one for this case, and this patch is thus
backwards compatible with prior designs not using Segmented Configuration.
Also, Segmented Configuration is going to become the default mode for Versal
products, so the xilinx-prebuilt github location will also soon have two PDI
files for each board. For this reason, this patch is also handling Segmented
Configuration for files downloaded from the xilinx-prebuilt repo.
For further information about the AMD Segmented Configuration, please see the
github tutorial below.
https://github.com/Xilinx/Vivado-Design-Tutorials/tree/2024.2/Versal/Boot_and_Config/Segmented_Configuration
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The versal vpl_gen_fixed.pdi file is not a target executable, so the file
permissions should be 644 instead of 755.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
CVE-2020-15705 is only applicable to grub versions up to 2.04, and
we're using a more recent version, so it is no longer needed to ignore
it.
CVE-2021-46705 is only applicable to grub versions up to 2.06, and
we're using a more recent version, so it is no longer needed to ignore
it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit 7dd56b6cd9 ("boot/grub2/readme.txt: don't specify /dev/loop0")
changed the description of the loopback mounting to use losetup -f <img>,
but forgot to add the --show option, causing losetup to not print the
loopback device name.
Fix that by adding the --show option.
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[Peter: Reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building a firmware for the MACCHIATObin with edk2 and
arm-trusted-firmware, the build can randomly fail with the
following make error:
make[1]: Circular output/build/edk2-edk2-stable202411/.stamp_configured <- arm-trusted-firmware dependency dropped.
The message appears also when the build is not failing, depending on
the number of parallel jobs and the build order.
The issue can be observed with the following commands:
cat >.config <<EOF
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="a80x0_mcbin"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33=y
BR2_TARGET_BINARIES_MARVELL=y
BR2_TARGET_EDK2=y
BR2_TARGET_EDK2_PLATFORM_SOLIDRUN_ARMADA80X0MCBIN=y
BR2_TARGET_MV_DDR_MARVELL=y
EOF
make olddefconfig
utils/brmake
grep -FC5 'dependency dropped' br.log
The circular dependency happen due to [1] and [2].
In fact, only TF-A depends on EDK II (passed as BL33) for building and
not vice versa. See [3]. The EDK II "SolidRun MacchiatoBin" platform
build does not need any TF-A image, compared to some other platforms
such as "Socionext DeveloperBox" or "QEMU SBSA" which are referencing
TF-A images in a hook added in EDK2_PRE_BUILD_HOOKS.
Drop the false dependency on TF-A to fix the build.
This issue has been present since the EDK2 introduction in commit [4].
[1] https://gitlab.com/buildroot.org/buildroot/-/blob/2025.02/boot/arm-trusted-firmware/arm-trusted-firmware.mk#L121
[2] https://gitlab.com/buildroot.org/buildroot/-/blob/2025.02/boot/edk2/edk2.mk#L118
[3] https://github.com/Semihalf/edk2-platforms/wiki/Build_firmware
[4] 1074a37e78
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
[Julien: add extra info in commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
When Building arm-trusted-firmware for the Macchiatobin platform
(a80x0_mcbin), which depends on the mv-ddr-marvell package, the build fails
complaining that this package's folder "does not contain valid
mv-ddr-marvell git repository".
This is expected under Buildroot, where we use intermediate archives.
The issue can be reproduced with the commands:
cat >.config <<EOF
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="a80x0_mcbin"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33=y
BR2_TARGET_BINARIES_MARVELL=y
BR2_TARGET_EDK2=y
BR2_TARGET_EDK2_PLATFORM_SOLIDRUN_ARMADA80X0MCBIN=y
BR2_TARGET_MV_DDR_MARVELL=y
EOF
make olddefconfig
make
The build is failing with the error message:
plat/marvell/armada/a8k/common/ble/ble.mk:34: *** "'MV_DDR_PATH=/buildroot/output/build/mv-ddr-marvell-d5acc10c287e40cc2feeb28710b92e45c93c702c' was specified, but '/buildroot/output/build/mv-ddr-marvell-d5acc10c287e40cc2feeb28710b92e45c93c702c' does not contain valid mv-ddr-marvell git repository". Stop.
Add patches to fix the build for this platform, for a few versions of TF-A
(v2.6, v2.7, v2.8, lts-v2.8.20, v2.9, v2.10, lts-v2.10.5, v2.11, v2.12 and
lts-v2.12.1).
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
[Julien: add commands to reproduce the issue]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Update OP-TEE to its latest tag
Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
[Julien: move package archive hash to the "Locally computed" section]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Change all Kconfig entries for packages in the "Bootloaders" menu to
submenus.
Currently many bootloaders and firmwares in this menu use a 'config'
keyword and thus menuconfig presents their sub-options as a flat list in
the same menu. This is not very convenient as some have a lot of
sub-options, and in (more and more common) configurations with multiple
such packages enabled the menuconfig screen becomes very crowded. Moreover
options of 'string' type don't have a visible indentation when their value
exceeds a few characters, thus making it visually hard to grasp which
package the various options belong to.
Non-bootloader packages having suboptions usually use a 'menuconfig'
keywork to have sub-options in a submenu. Do the same for packages in the
"Bootloaders" menu which have more than one sub-option.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Due to how menuconfig works, a 'comment' entry following a 'config' entry
prevents correct indentation of items depending on the 'config'
entry. xilinx-embeddedsw currently shows as:
[*] xilinx-embeddedsw
*** xilinx-embeddedsw needs a bare metal toolchain for tuple microblazeel-xilinx-elf ***
(xilinx_v2024.2) xilinx-embeddedsw version (NEW)
[ ] versal plm (NEW)
[ ] versal psmfw (NEW)
[ ] zynqmp pmufw (NEW)
[ ] xilinx-prebuilt
So the 'versal *' and 'zynqmp pmufw' items are not indented even though
they should be.
Do like most other Config.in files which have the 'comment' before the
'config' entry, makeing it render as expected:
*** xilinx-embeddedsw needs a bare metal toolchain for tuple microblazeel-xilinx-elf ***
[*] xilinx-embeddedsw
(xilinx_v2024.2) xilinx-embeddedsw version (NEW)
[ ] versal plm (NEW)
[ ] versal psmfw (NEW)
[ ] zynqmp pmufw (NEW)
[ ] xilinx-prebuilt
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
cpe:2.3:o:linaro:op-tee:4.3.0:*:*:*:*:*:*:* is a valid CPE ID.
See:
https://nvd.nist.gov/products/cpe/detail/2754E8CF-9BD5-448D-9F32-CFAC92278CD9
Note: this commit needs to set _CPE_ID_PREFIX because optee-os CPE
"part" needs to be set to "o" (OS), while the default Buildroot prefix
is "a" (Application).
Signed-off-by: Daniel Lang <dalang@gmx.at>
[Julien:
- add extra info in commit log (and fix CVE to CPE)
- add a new line after OPTEE_OS_CPE_ID_PRODUCT for readability
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Currently, the LPDDR firmware binaries do not get installed into the
U-Boot mainline directory, causing U-Boot build to fail for i.MX93.
Fix this problem by expanding the BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW
checks to also take BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 into account.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Now that BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH can contain multiple tuples,
BR2_TARGET_XILINX_EMBEDDEDSW can no longer be dependent on:
depends on BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH = "microblazeel-xilinx-elf"
A valid definition could have "microblazeel-xilinx-elf" as just one of many
tuples in the list.
For this reason, this patch changes the dependency to:
depends on BR2_TOOLCHAIN_BARE_METAL_BUILDROOT
One side effect of this is that the user comment will be displayed now when
using multiple tuples, even if one of them is the required tuple.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
u-boot has introduced a new file called qspi.bin for users who boot from a
qspi flash device. It combines the spl/boot.bin and u-boot.itb files into a
single binary that can be written to the qspi flash.
Here is an example of how binman generates the qspi.bin:
a4c9811910
At the moment, the qspi.bin is only used for the zynqmp platform, but other
platforms may adopt it, so the buildroot support has been made in a generic
way.
This patch adds the necessary support for buildroot to install this binary.
[Tested on Kria KV260 starter kit]
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using binman to generate u-boot images, there will no longer be a make
rule for generating files produced by binman. However, these files will still
need to be installed to the output/images directory.
One such file is the u-boot.itb. If the u-boot.itb is generated by binman,
then the file still needs to be copied, but without the make rule.
Here is an example of how binman generates the u-boot.itb:
a4c9811910
[Tested on Kria KV260 starter kit]
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the versal defconfigs have been bumped to the new default version
xilinx_v2024.2_update1, the xilinx_v2024.2 hash can be removed.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch bumps the default version of xilinx-prebuilt to
xilinx_v2024.2_update1. For some reason, the original xilinx_v2024.2
release tag was missing the kria boards. There is no difference between
the xilinx_v2024.2 and the xilinx_v2024.2_update1 release tags other than
the fact that the kria boards are included.
Now that the release tag includes all the boards, it is possible to bump
the default version from xilinx_v2024.1 to xilinx_v2024.2_update1.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
--
There is actually no need to have two hash files for the xilinx-prebuilt
package. As long as the boot/xilinx-prebuilt/xilinx-prebuilt.hash contains
the hash value for the default version as well as any version used by a
xilinx board defconfig, a single hash file is all that is needed.
In the future, when bumping the defconfig files independently of the
xilinx-prebuilt default version, all that has to be done is the following
process.
Patch Series:
1. Add new version hash to boot/xilinx-prebuilt/xilinx-prebuilt.hash.
2. Bump board defconfigs to new version.
3. Bump xilinx-prebuilt default version.
For this reason, this patch merges the two xilinx-prebuilt.hash files and
removes the board/xilinx xilinx-prebuilt.hash file.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The new BR2_TARGET_UBOOT_ZYNQMP_PMUFW_EMBEDDEDSW option will enable u-boot to
use the xilinx-embeddedsw package for building a pmufw.elf that gets included
in the generated boot.bin.
If the BR2_TARGET_UBOOT_ZYNQMP_PMUFW_EMBEDDEDSW option is enabled, then the
BR2_TARGET_UBOOT_ZYNQMP_PMUFW config for downloading a prebuilt pmufw from a
custom location will be ignored.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Luca: Tested on Kria KV260 starter kit]
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds a new boot package to Buildroot for building boot firmware
applications from the https://github.com/Xilinx/embeddedsw repo.
If a user chooses to build a boot firmware application, it will not be
installed by the xilinx-prebuilt package since it will come from the
xilinx-embeddedsw package. In this way, users can mix and match applications
to be built by the xilinx-embeddedsw package and applications to be copied
from the xilinx-prebuilt package. This is necessary for the versal platform
because the pdi file can only be built by AMD Vivado.
Support for additional applications in the https://github.com/Xilinx/embeddedsw
repo can always be added to this package as needed or requested.
The xilinx-embeddedsw package replaces previous solutions including
zynqmp-firmware, versal-firmware and xilinx-source.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Luca: Tested on Kria KV260 starter kit]
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
No autobuilder failures reported, but it fixes build issues that can
be reproduced with:
BR2_x86_64=y
BR2_x86_corei7=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_CORE_I7_GLIBC_BLEEDING_EDGE=y
BR2_TARGET_SYSLINUX=y
BR2_TARGET_SYSLINUX_EFI=y
First patch is backported from upstream. Last 3 patches are not from
upstream, and they have not been submitted as upstream is basically
dead (last release 10 years ago, last commit 5 years ago).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Add custom version option, to enable easily specifying an official OP-TEE
version to use.
This is similar to what is done in other packages, such as linux, uboot or
arm-trusted-firmware.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Étienne Carrière <etienne.carriere@foss.st.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
