The k3-am62a7-sk.dts describes an I2C PMIC TPS659312 which features a
number of regulators. One of them, ldo1, is used as power supply for the
SD card host controller regulator. When the rootfs is on the SD
card (like with this configuration), we need support for these three
components (Regulator driver, I2C PMIC glue and PMIC MFD driver) to be
built-in in order to avoid boot failures.
Tested on an AM62A LP SK.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The patch bumps the Linux kernel to version 6.1.126. The size of xipImage
has increased by only 284 bytes (1670242 bytes compared to 1670242 in
version 6.1.112).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.176 and, for the SD
configuration, also updates U-Boot to version 2025.01.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
and fix dd of=sdc because it is very dangerous to have exiting drive in example
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Updating directly to 4.x is too difficult and complex, as mender 4.x is
a complete rewrite in C++, with several new dependencies and changes.
As such, update to the last version that was written in Go, which is
3.5.3. The following changes are necessary:
The artifact_info file is no longer supported. Instead, mender now expects a
bootstrap.mender artifact created by mender-artifact /var/lib/mender.
See the following for more information:
https://northerntech.atlassian.net/browse/MEN-2585https://northerntech.atlassian.net/browse/MEN-2583https://docs.mender.io/release-information/release-notes-changelog/mender-client#mender-3-5-0-1https://github.com/mendersoftware/mender/blob/3.5.3/Documentation/automatic-bootstrap-artifact.md
- Remove all instances of creating or copying an artifact_info file
from board examples and package/mender.
- Add a generate_mender_bootstrap_artifact method to
board/mender/x86_64/post-image-efi.sh which creates a proper
bootstrap.mender file and places it in the data partition.
- Add a post-build.sh script to support/testing/tests/package/test_mender
with the same generate_mender_bootstrap_artifact method with one change:
As the rootfs.ext4 file is not yet created; we omit the optional
--provides "rootfs-image.checksum:${img_checksum}" argument when
generating the bootstrap.mender file.
Mender expects the device_type file to exist in /var/lib/mender/device_type.
This is further supported by the following line in tests/Dockerfile.daemon:
`echo device_type=docker-client > /var/lib/mender/device_type`
Add a migration section in docs/manual/migrating.adoc
Update the package/mender/readme.txt to include a quick mention of the
bootstrap.mender artifact change.
License changes:
New:
vendor/github.com/klauspost/compress/internal/snapref/LICENSE (BSD-3-Clause)
vendor/github.com/klauspost/compress/zstd/internal/xxhash/LICENSE.txt (MIT)
Removed:
vendor/github.com/klauspost/compress/internal/snapref/LICENSE
vendor/github.com/klauspost/compress/zstd/internal/xxhash/LICENSE.txt
Modified:
LICENSE: Update year from 2022 to 2024
LIC_FILES_CHKSUM.sha256: Sum of all Licenses changed
vendor/github.com/mendersoftware/mender-artifact/LICENSE
- Update year from 2022 to 2023
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Arnout:
- fix LIC_FILES_CHKSUM.sha256 hash
- Better URL for bootstrap artifact doc
- Migrate to 2025.02 instead of 2024.11
- Improve migrating text (editorial changes)
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch updates the documentation for Kria SOMs for reflashing
the new qspi.bin binary file.
The qspi.bin is a unified binary containing both the boot.bin and
u-boot.itb files for simplifying the reflashing process and also
enabling the BIRT for reflashing the qspi.bin image as either
"ImageA" or "ImageB".
Signed-off-by: Neal Frager <neal.frager@amd.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch migrates the zynqmp defconfigs to binman applying the necessary
upstream uboot patches.
With binman, u-boot can now build the correct u-boot.itb files for kria
natively. So the post-build fixup scripts are no longer needed and can
be removed.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the zynqmp binman patches that are already committed to the
u-boot next branch post U-Boot v2025.01 in preparation for v2025.04.
Upstream: 10de9b5a6a
Upstream: 290385f374
Upstream: d92fdb6067
Upstream: afbc1fa5f1
Upstream: 2eb8cd5bd4
Upstream: a4c9811910
[Tested on Kria KV260 starter kit]
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: extend commit message to clarify what U-Boot release "next" refers to]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The logic behind making /var/lib/mender a symlink to itself is to
detect if a filesystem is read-only. However, this creates a few problems:
1) The logic confusing.
2) The official mender documentation suggests four partitions minimum:
- boot
- rootfs A
- rootfs B
- data
If a user is to follow the official documentation, which they should,
then there is no need for any additional logic for a system setup with
a read-only filesystem, as the data partition is always read-write.
3) The post-build.sh script in the board/mender/x86_64 directory removes
the symlink.
- Remove symlinking /var/lib/mender to itself
- Remove the difficult to understand logic dealing with the symlinks
in S42mender, mender-client.service.
- Remove the logic dealing with the symlink in
board/mender/x86_64/post-build.sh
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Put the write rootfs-image argument before the compression argument.
This change makes the logic easier to follow.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Set the names of the Ethernet interfaces that are exposed from a first
boot so they are aligned with those described by Mellanox/NVIDIA
documentation for the BF3.
Those tmfifo and oob interface names are describeded at:
https://docs.nvidia.com/networking/display/bluefielddpuosv460/host-side+interface+configuration
When running the native Ubuntu on the BF3 board, the following udev
rules are set:
$ cat /etc/udev/rules.d/91-tmfifo_net.rules
SUBSYSTEM=="net", ACTION=="add", DEVPATH=="/devices/platform/MLNXBF01:00/virtio1/net/eth[0-9]", NAME="tmfifo_net0"
$ cat /etc/udev/rules.d/92-oob_net.rules
SUBSYSTEM=="net", ACTION=="add", DEVPATH=="/devices/platform/MLNXBF17:00/net/e*", NAME="oob_net0", RUN+="/sbin/sysctl -w net.ipv4.conf.oob_net0.arp_notify=1"
The default CX ports of the BF3 are:
ubuntu@bf$ ip link show p0
4: p0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode
DEFAULT group default qlen 1000
link/ether a0:88:c2:xx:xx:xx brd ff:ff:ff:ff:ff:ff
altname enp3s0f0np0
ubuntu@bf$ ip link show p1
5: p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode
DEFAULT group default qlen 1000
link/ether a0:88:c2:xx:xx:xx brd ff:ff:ff:ff:ff:ff
altname enp3s0f1np1
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
There is actually no need to have two hash files for the xilinx-prebuilt
package. As long as the boot/xilinx-prebuilt/xilinx-prebuilt.hash contains
the hash value for the default version as well as any version used by a
xilinx board defconfig, a single hash file is all that is needed.
In the future, when bumping the defconfig files independently of the
xilinx-prebuilt default version, all that has to be done is the following
process.
Patch Series:
1. Add new version hash to boot/xilinx-prebuilt/xilinx-prebuilt.hash.
2. Bump board defconfigs to new version.
3. Bump xilinx-prebuilt default version.
For this reason, this patch merges the two xilinx-prebuilt.hash files and
removes the board/xilinx xilinx-prebuilt.hash file.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch bumps the Linux kernel to version 6.12.11 and U-Boot to
version 2025.01.
Arm trusted firmware is already up to date.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
At the moment, Buildroot provides genimage v18. However that version
does not yet include the GUID shortcut for 'u-boot-env' partition type.
This convenient change is relatively new (see [1]) and can be expected
in v19. For now, use the GUID value directly.
[1] 3e0a2aea8d
Fixes: 057012eb2c ("configs/orangepi_5_plus: new board")
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds basic support for the new OrangePi 5 Plus board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus-32GB.html
Brief summary of the board features:
- RK3588 Rockchip SoC
- Quad-Core ARM Cortex-A76 Processor 2.4GHz
- Quad-Core ARM Cortex-A55 Processor 1.8GHz
- Mali G610 GPU
- NPU 6 Tops INT4/INT8/INT16/FP16
- LPDDR4x: 8GB/16GB/32GB
- 2x USB 2.0
- 2x USB 3.0
- 2x HDMI out
- PCIe M.2 M-key socket (e.g. for NVMe)
- PCIe M.2 E-key socket (e.g. for WiFi/BT)
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM / CAN / I2S)
- and much much more ...
BSP includes the following components:
- mainline ATF v2.12
- mainline U-Boot v2024.10
- mainline Linux kernel v6.12.x
Unlike all the other boards from board/orangepi directory, this board
is not based on an Allwinner SoC. It is based on Rockchip RK3588 SoC.
So custom scripts and configs are used instead of common options from
the board/orangepi/common directory. Suggested scripts and configs are
based on those of Radxa Rock5B board.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Julien:
- switch to human readable genimage.cfg partition type uuid
- add ATF hash in custom hash patches
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Update all qemu defconfigs to the latest Kernel LTS version.
Runtime tested locally (on a build server).
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Now that all of the Xilinx boards have been bumped to Linux 6.6.60, the
Linux 2024.2 (6.6.40) hash can be removed.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds the hash for Linux version 6.6.60 for Xilinx boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit 75320f567d "configs/imx6ulz_bsh_smm_m2: bump U-Boot to 2024.10
and Linux to 6.1.120" updated the kernel from 6.1.68 to 6.1.120 but
forgot to update its per-config kernel hash file.
The defconfig fails with the error:
ERROR: No hash found for linux-6.1.120.tar.xz
This failure happen since commit 07149e5f30 "{linux, linux-headers}:
bump 5.{4, 10, 15}.x / 6.{1, 6, 12}.x series" which updated the
Buildroot 6.1 kernel series from 6.1.120 to 6.1.122.
This commit fixes the issue by updating the hash.
While at it, it also changes the "Locally computed" comment
by the upstream link to hashes.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8751983243
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patchs bumps the OpenSBI of qemu_riscv{32,64}_virt to 1.6. The
qemu commands in the readmes are adjusted to use OpenSBI's fw_jump.bin
instead of fw_jump.elf, as the later causes ROM overlapping issues if
OpenSBI 1.6 is used. See:
https://github.com/riscv-software-src/opensbi/issues/372
This commit also updates the opensbi.hash file.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[Julien: update opensbi.hash]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to:
* Linux LTS 6.12.6
* U-Boot 2024.10
Provide hashes for all above components and enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to:
* Linux LTS 6.12.6
* U-Boot 2024.10
Provide hashes for all above components and enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to:
* Linux LTS 6.12.6
* U-Boot 2024.10
* ATF 2.11
Provide hashes for all above components and enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Increase ext4 rootfs size to fit larger components.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
- Bump Linux kernel to 6.1.120
- Bump U-Boot to 2024.10 and add the dependency on GnuTLS and
util-linux (for uuid)
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
If the u-boot DP driver attempts to configure the Kria SOM DP before it is
released from reset, it will cause a boot hang. Since the KV260 uses the DP
by default, this patch needs to be included with buildroot until it is part
of a u-boot-xlnx release tag.
While only the KV260 is directly affected, there is no issue with applying
this patch to all 3 zynqmp_kria defconfigs.
This patch has also been committed to u-boot upstream.
Upstream: 8b81010a2f
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Julien: fix check-package error by adding Upstream tag in patch]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Bump Linux kernel version to 6.12.5 and update the hash accordingly.
Signed-off-by: Scott Fan <fancp2007@gmail.com>
[Julien: add missing BR2_TARGET_UBOOT_NEEDS_GNUTLS=y]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Bump Linux kernel version to 6.12.5 and update the hash accordingly.
Signed-off-by: Scott Fan <fancp2007@gmail.com>
[Julien: add missing BR2_TARGET_UBOOT_NEEDS_GNUTLS=y]
Signed-off-by: Julien Olivain <ju.o@free.fr>
We have no more hash file for TF-A v2.11 in the package directory since
commit 24615d1502 ("boot/arm-trusted-firmware: bump to v2.12"); add
one in our global patches directory.
This fixes the following warning:
WARNING: no hash file for arm-trusted-firmware-v2.11-git4.tar.gz
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3. Switch to U-Boot 2024.10 and
ATF 2.11. Force check of hashes for Linux kernel, headers, U-Boot, ATF.
Finally, add BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3. Switch to U-Boot 2024.10 and
ATF 2.11. Force check of hashes for Linux kernel, headers, U-Boot, ATF.
Increase ext2 partition size to fit new software versions. Finally, add
BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3 and to U-Boot 2024.10.
Force check of hashes for Linux kernel, headers, U-Boot. Finally,
add BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3 and to U-Boot 2024.10.
Force check of hashes for Linux kernel, headers, U-Boot. Finally,
add BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3 and to the latest U-Boot
2024.10. Add hashes for Linux kernel/headers and U-Boot. Finally,
add BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Julien:
- add BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
- remove .checkpackageignore entry
- change linux.hash comment to use upstream hashes
- add missing BR2_GLOBAL_PATCH_DIR
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3 and to the latest U-Boot
2024.10. Tune the patch for xr819 interrupts for the new kernel.
Add hashes for Linux kernel/headers and U-Boot. Finally, add
BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Julien:
- add BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
- remove .checkpackageignore entry
- change linux.hash comment to use upstream hashes
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Update to Linux 6.12, which also happens to be a LTS release.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This commit also updates the label name, and the unnecessary "default"
entry is also removed.
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Switch to extlinux instead of U-Boot boot script.
Remove obsolete entry from the .checkpackageignore file.
Drop custom boot script and genimage config.
Drop unnecessary generic and host configs.
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
