Traditional VT-10x terminals (and their emulators) [0] have a "magic
margins" feature that enables the last character position to be updated
without scrolling the screen: whenever a character is printed on the
last column, the cursor stays over the character, instead of moving to
the next line.
The Busybox shell, ash, attempts to defeat this feature by printing
CR,LF right after echoing a character to the last column.[1] This
doesn't play well with emulator.py. The run() method of the Emulator
class captures the output of the emulated system and assumes the first
line it reads is the echo of the command, and all subsequent lines are
the command's output. If the line made by the command + shell prompt is
longer than 80 characters, then it is echoed as two or more lines, and
all but the first one are mistaken for the command's output.
We fix this by telling the emulated system that we are using an
ultra-wide terminal with 29999 columns. Larger values would be ignored
and replaced by the default, namely 80 columns.[2]
[0] https://vt100.net/docs/vt100-ug/chapter3.html - DECAWM
[1] https://git.busybox.net/busybox/tree/libbb/lineedit.c?h=1_34_0#n412
[2] https://git.busybox.net/busybox/tree/libbb/xfuncs.c?h=1_34_0#n258
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Co-authored-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit eb3ee3078a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compiling on Ubuntu 20.04 generates this:
./util.c: In function ‘file_write_dep’
./util.c:54:18: warning: ‘..config.tmp’ directive writing 12 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~
./util.c:54:2: note: ‘sprintf’ output between 13 and 4109 bytes into a destination of size 4097
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and similar warnings on confdata.c, lines 778, 989, 995, 1000, 1007,
1040, 1046 and 1054. Avoid the warnings by enlarging the destination
buffer of fprintf().
Normally, we want changes to kconfig to be reflected by patches in
support/kconfig/patches. This makes it easier to resync with upstream
kconfig. However, in this case, everything that is changed here is
already changed completely (and differently) upstream, so there is no
added value in keeping the patch.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 324612d68e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When booting under EFI, grub2 will output a nice and shiny boot menu,
using extended ASCII characters (in the [0x80..0xFF] range), namely
CP437 [0], on the assumption that the VGA BIOS is a real one and has the
corresponding (and only!) font, as is the case on real hardware.
However, when run in our runtime test infrastructure, this triggers the
infamous python UnicodeDecodeError exception:
Traceback (most recent call last):
[...]
emulator.login()
File "[...]/buildroot/support/testing/infra/emulator.py", line 89, in login
index = self.qemu.expect(["buildroot login:", pexpect.TIMEOUT],
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 340, in expect
return self.expect_list(compiled_pattern_list,
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 369, in expect_list
return exp.expect_loop(timeout)
File "/usr/lib/python3/dist-packages/pexpect/expect.py", line 111, in expect_loop
incoming = spawn.read_nonblocking(spawn.maxread, timeout)
File "/usr/lib/python3/dist-packages/pexpect/pty_spawn.py", line 485, in read_nonblocking
return super(spawn, self).read_nonblocking(size)
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 178, in read_nonblocking
s = self._decoder.decode(s, final=False)
File "/usr/lib/python3.8/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xda in position 0: invalid continuation byte
Grub2 is not wrong in emitting those chars, and basically we should not
expect the packages we test to always emit correct UTF-8 sequences; at
the very least, this should not cause the test infra to fail.
We fix that by telling pexpect.spawn to "fix" such invalid sequences by
replacing them with the suitable Unicode character, U+FFFD REPLACEMENT
CHARACTER.
[0] https://en.wikipedia.org/wiki/Code_page_437
[1] https://docs.python.org/3/library/codecs.html#error-handlers
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- don't change encoding, use codec_errors
- rewrite commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d6d7cbb8e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To avoid spending some time to build the x86_64 toolchain (~20min),
switch to corei7 cpu (Nahalem) and use the prebuilt Bootlin toolchain.
We have to use the "stable" Bootlin toolchain to use the same kernel version
for the toolchain kernel headers and the running kernel.
With the "bleeding-edge" toolchain we have the "kernel too old" issue
(running kernel 4.19 vs kernel headers 5.4)
Runtime tested locally.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 521b6f8550)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch from the Buildroot internal toolchain for armv5 to
the prebuilt Bootlin external toolchain.
The test doesn't require to build a toolchain, there was
no prebuilt glibc toolchain recent enough at the time this
test has been introduced.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 184d20404e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test already use builtin kernel provided by the testsuite infra:
self.emulator.boot(arch="armv7",
kernel="builtin",
options=["-initrd", img])
But a second kernel is build from the its defconfig. This second kernel
is not used by the test.
The TestRust (using BR2_PACKAGE_HOST_RUST=y) is really long to build,
save some cpu time by removing the kernel build.
This unused kernel (based on 4.11.3 release) doesn't even build with
host gcc >= 10.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f6d438d59f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 5.5.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
But we can't just update this test to the next linux kernel LTS 5.10.y since
the minimum gcc version has been updated to gcc 4.9 since 5.8 kernel [2]
and the Sourcery CodeBench ARM 2014.05 is used (gcc 4.8 based).
Enable arm cortex A9 and VFP support to switch to the ARM arm prebuilt
toolchain (the Bootlin toolchain could be used).
While at it use the prebuilt buildin kernel for the vexpress target
recently updated to 5.10.7.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1564202094
[1] https://gcc.gnu.org/gcc-10/porting_to.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6ec4476ac82512f09c94aff5972654b70f3772b2
[3] 3cf2782906
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e0ad7c6411)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.16.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 73278c8a70)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.16.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e0a64dfc0e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.11.3 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 69de111c46)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.11.3 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 322b40405e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version bump is needed to pass the ATF test with
hardening option enabled (-fstack-protector-strong)
With the version v2.2, ATF fail due to undefined references:
./build/juno/release/bl2u/arm_tzc400.o: In function `arm_tzc400_setup':
arm_tzc400.c:(.text.arm_tzc400_setup+0x10): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0x18): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0xb8): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0xcc): undefined reference to `__stack_chk_fail'
Since commit ccac9a5bbb, Buildroot no
longer forces ENABLE_STACK_PROTECTOR. However, we rely on the ATF build
system to handle it correctly, and this wasn't the case in v2.2.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1524842591
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e5494f1fac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc 10.x is now used by default but the kernel 4.19 used by
test_docker_compose doesn't build with it.
Bump the kernel to 4.19.204 release that contains a lot of
fixes for newer gcc.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5d60e07e27)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2eaa6d0f36 (boot/uboot: fix uboot building host tools on x86
architecture) added use of $(PKG_CONFIG_HOST_BINARY), but forgot to add
the corresponding build-ordr dependency.
Add this missing depenency now.
Additionally, the associated test had an explicit host pkgconf enbled in
its configuration. This is superfluous now that uboot properly depends
on host-pkgconf, so drop that from the test.
Note: it hapenned to work, because host-pkgconf, when explicitly enabled
in the configuration, and without per-package directories, would build
before uboot and thus be available. This would fail with PPD, though,
and thus would break for TLPB.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d0edfec1e2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The make all command run the tools/makefile on the process.
This makefile use "pkg-config" command to support static link.
The issue is the use of pkg-config configured for crosscompiling
to build binaries tools for host architecture.
To fix it, I add pkg-config environment variable to configure it for host.
Add a test to avoid future regress on the build of U-boot.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- fix mixed space-TAB indentation
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2eaa6d0f36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extend docker_compose_test() to expose /bin on the host to the container
through a volume mount and verify that /bin/busybox can be downloaded and
contains the right data.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit aa31d10808)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extend docker_test() to expose a random (8888) port to verify that doesn't
fail, and extend the docker-compose test to run the busybox httpd in the
background, expose that as port 80 and verify that /etc/resolv.conf could be
fetched by wget.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4915b692c8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel 4.16.7 is old enough to produce the "multiple definition of `yylloc'"
error which is fixed in newer versions.
Bump the test kernel version from 4.16.7 to 5.10.34 to prevent this error wwhen
building the test image.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ab2d472cde)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ijson < 2.5 (as available in Debian 10) use the slow python backend by
default instead of the most efficient one available like modern ijson
versions, significantly slowing down cve checking. E.G.:
time ./support/scripts/pkg-stats --nvd-path ~/.nvd -p avahi --html foobar.html
Goes from
174,44s user 2,11s system 99% cpu 2:58,04 total
To
93,53s user 2,00s system 98% cpu 1:36,65 total
E.G. almost 2x as fast.
As a workaround, detect when the python backend is used and try to use a
more efficient one instead. Use the yajl2_cffi backend as recommended by
upstream, as it is most likely to work, and print a warning (and continue)
if we fail to load it.
The detection is slightly complicated by the fact that ijson.backends used
to be a reference to a backend module, but is nowadays a string (without the
ijson.backends prefix).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f31227e628)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a --transform expression is provided, it is by default also applied
to the target of a symlink.
When we create tarballs (from git or svn checkouts), we use a --transform
expression to replace the leading ./ with the package name and version.
This causes issues when a package contains symlinks that points to
./something, as the leading './' is also replaced.
Fix that by using the 'S' transformation scope flag, as described in the
tar manual:
https://www.gnu.org/software/tar/manual/html_node/transform.html#transform
In addition, several transformation scope flags are supported, that
control to what files transformations apply. These are:
‘r’ Apply transformation to regular archive members.
‘R’ Do not apply transformation to regular archive members.
‘s’ Apply transformation to symbolic link targets.
‘S’ Do not apply transformation to symbolic link targets.
‘h’ Apply transformation to hard link targets.
‘H’ Do not apply transformation to hard link targets.
Default is ‘rsh’ [...].
Fixes: #13616
This has been checked to not change any of the existing hash for any of
our git-downloaded package (some are host-only, hence the few fixups):
---8<---
$ m="$( git grep -l -E -- -br[[:digit:]]+.tar.gz boot package/ \
|awk -F/ '{print $(NF-1)}' \
|sed -r -e 's/(imx-mkimage|netsurf-buildsystem|prelink-cross|qoriq-rcw|vboot-utils)/host-\1/g' \
-e 's/$/-source/'
)"
$ make defconfig; make clean; BR2_DL_DIR=$(pwd)/trash-me make ${m}
---8<---
Note: it is unclear what the 'H' flag does nor how it works, because the
concept of "target of a hardlink" is not obvious; probably it has to do
with how tar internally detects and stores hardlinks. Since we do not
yet have any issue with hardlinks, just ignore the problem for now, and
postpone until we have an actual issue with a real test-case.
Signed-off-by: Jean-pierre Cartal <jpcartal@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- re-indent commit log
- add scriptlet to test existing hashes
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c9f27fdc1b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Makefiles, variables are split, filtered, and otherwise mangled on
a space as a separator. In a shell, they will also be split on TABs.
We split and filter and iterate on variables in a lot of places, and
most importantly, spaces in PATH is very seldom tested, if at all, so
a lot of packages will not be working properly in such a situation.
For example, the config.guess contains constructs that are not resilient
to a space in PATH:
PATH=$PATH:/.attbin ; export PATH
Also, our fakedate will iterate over PATH:
for P in `echo $PATH | tr ':' ' '`; do
Those are only two cases, but the first means basically all
autotools-based packages are susceptible to subtle breakage.
Furthermore, Buildroot itself does not support that the top-level or
output directories are in a path with spaces anyway.
So, instead of chasing all cases that might be potentially broken,
let's just detect the case and bail out, like we already do when PATH
contains a \n, or when it contains the current working directory.
Reported-by: Dan Raymond <draymond@foxvalley.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e36974d9e8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since c043ecb20c (support/download: change format of archives
generated from svn), the svn backend uses the generic helper to
create reproducible archives.
That helper really does its job as expected, but the svn backend
is flawed in two ways:
- the first, most obvious breakage happens with versions older
than 1.9, as they do not support the '--show-item' option
for the 'info' action;
- the second is more involved, in that svn will by default
expand the old, legacy, deprecated, cumbersome CVS-style
keywords, in the form of revision marks like '$Date$' in a
C-style comment in a source file. These replacements are
done on checkout as well as on export, and they use local
settings, like the local locale and timezone.
This means that two people with different settings, will get
different sources when the svn-checkout or svn-export the same
revision from the same tree...
Needless to say that this is not very reproducible...
While the first is easily solved, the second is more involved.
We need to ensure that what source is used initially to compute
the hash, will also be the source that are used to check the hash.
There are basically two solutions:
1. we ensure the same environment, by forcing the timezone and
the locale to arbitrary values
2. we disable keyword expansion
For the first solution, this still leaves the possibility that we
miss some environment settings that have an impact on the keyword
expansion. It would mean that Yann's settings be used, as he did
introduce the hash for the only svn-downloaded package we have,
avrdude, settings which are:
TZ=Europe/Paris
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_GB.UTF-8"
LC_MONETARY="fr_FR.utf8"
LC_NUMERIC="fr_FR.utf8"
The second option means that the generated archives change. That
means we'd have to bump the archive version for svn downloads, and
that we update the hashes for all the svn-downloaded packages.
We chose to go with the second option, because this is what really
makes more sense, rather than hard-coding arbitrary values in the
environment. And we also have only one svn-downloaded package,
avrdude.
And thus, we're reaching the trigger for this change: avrdude is
impacted by the CVS-keyword expansion issue:
https://svn.savannah.gnu.org/viewvc/avrdude/trunk/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js?revision=1396&view=markup
which would give two different files when checked out on different
machines:
diff -durN foo/avrdude-r1450/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js bar/avrdude-r1450/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js
--- foo/avrdude-r1450/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js 2020-09-22 09:36:45.000000000 +0200
+++ bar/avrdude-r1450/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js 2020-09-22 09:36:45.000000000 +0200
@@ -1,6 +1,6 @@
/**
* @preserve jquery.layout 1.3.0 - Release Candidate 30.51
- * $Date: 2015-11-02 22:13:28 +0100 (Mon, 02 Nov 2015) $
+ * $Date: 2015-11-02 21:13:28 +0000 (Mon, 02 Nov 2015) $
* $Rev: 303005 $
*
* Copyright (c) 2012
@@ -4718,7 +4718,7 @@
/**
* jquery.layout.state 1.0
- * $Date: 2015-11-02 22:13:28 +0100 (Mon, 02 Nov 2015) $
+ * $Date: 2015-11-02 21:13:28 +0000 (Mon, 02 Nov 2015) $
*
* Copyright (c) 2010
* Kevin Dalman (http://allpro.net)
@@ -5074,7 +5074,7 @@
/**
* jquery.layout.buttons 1.0
- * $Date: 2015-11-02 22:13:28 +0100 (Mon, 02 Nov 2015) $
+ * $Date: 2015-11-02 21:13:28 +0000 (Mon, 02 Nov 2015) $
*
* Copyright (c) 2010
* Kevin Dalman (http://allpro.net)
@@ -5356,7 +5356,7 @@
/**
* jquery.layout.browserZoom 1.0
- * $Date: 2015-11-02 22:13:28 +0100 (Mon, 02 Nov 2015) $
+ * $Date: 2015-11-02 21:13:28 +0000 (Mon, 02 Nov 2015) $
*
* Copyright (c) 2012
* Kevin Dalman (http://allpro.net)
So we also update the hash for avrdude.
Fixes:
http://autobuild.buildroot.org/results/e3b/e3b0508047f32008ebfa83c5255ec5994b6af120/ (time issue)
http://autobuild.buildroot.org/results/48e/48e78e84b425e79cdb98c16ab40247a0fa7e9676/ (keyword expansion issue)
Reported-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c92be85e3a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
FOO_CPE_ID_VALID really ought to be an internal implementaion detail.
Packages that really want to trigger their CPE defintitions really
should set one of the actual variables to a meaningful value.
There are two CPE-related variables that we could chose to set to
replace FOO_CPE_ID_VALID: FOO_CPE_ID_VENDOR and FOO_CPE_ID_PRODUCT.
Between those two, _VENDOR more often diverges from the default than
_PRODUCT does, so that's what we use.
---8<------8<------8<------8<------8<---
#!/bin/bash
# Replace FOO_CPE_ID_VALID = YES with FOO_CPE_ID_VENDOR = foo_project
for i in $(git grep -l -E '[^)]_CPE_ID_VALID = YES' package support); do
pkg="$(basename "${i%/*}")"
sed -r -i -e "s/_CPE_ID_VALID = YES/_CPE_ID_VENDOR = ${pkg}_project/" "${i}"
done
---8<------8<------8<------8<------8<---
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: update cpe-test comment to reflect pkg3 change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some download backends, like svn, will provide timestamps with a
sub-second precision, e.g.
$ svn info --show-item last-changed-date [...]
2021-02-19T20:22:34.889717Z
However, the PAX headers do not accept sub-second precision, leading to
failure to download from subversion:
tar: Time stamp is out of allowed range
tar: Exiting with failure status due to previous errors
make[1]: *** [package/pkg-generic.mk:148: [...]/build/subversion-1886712/.stamp_downloaded] Error 1
Fix that by massaging the timestamp to drop the sub-second part. We
do that in the generic helper, rather than the svn backend, so that
all callers to the generic helper benefit from this, as this is more
an internal details of the tarball limitations, than of the backends
themselves.
Reported-by: Roosen Henri <Henri.Roosen@ginzinger.com>
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- add Henri as reporter
- move it out of the svn backend, and to the generic helper
- reword the commit log accordingly
- use an explicit time format rather than -Iseconds
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As reported on IRC by sephthir, the gitlab test of the defconfig
qemu_sparc_ss10_defconfig doesn't error out while the system
is not working properly.
This is because we explicitly wait for the timeout as an expected
condition, but do not check for it. Indeed, pexpect.expect() returns
the index of the matching condition in the list of expected conditions,
but we just ignore the return code, so we are not able to differentiate
between a successful login (or prompt) from a timeout.
By default, pexepect.expect() raises the pexpect.TIMEOUT exception on a
timeout, and we are already prepared to catch and handle that exception.
But because pexpect.TIMEOUT is passed as an expected condition, the
exception is not raised.
Remove pexpect.TIMEOUT from the list of expected conditions, so that the
exception is properly raised again, and so that we can catch it.
The qemu_sparc_ss10_defconfig is already fixed by
4d16e6f532.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add the list of <pkg>_IGNORE_CVES to the json output to show that we have a
known cause (available patch or the CVE is not valid for our package
configuration) that a affected CVE is not reported.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pickle is no longer used since 09a71e6a75
Fixes:
support/scripts/cpedb.py:7:1: F401 'pickle' imported but unused
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the CPE XML database is parsed into a Python dict, which is
then pickled into a local file, to speed up the processing of further
invocations.
However, it turns out that since the initial implementation, we have
switched the XML parsing from the out of tree xmltodict module to the
standard ElementTree one, which has made the parsing much faster. The
pickle caching only saves 6 seconds, on something that takes more than
13 minutes total.
In addition, this pickle caching consumes a significant amount of RAM,
causing the Python process to be OOM-killed on a server with 4 GB of
RAM.
So let's just drop this caching entirely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test RISC-V 64/musl, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test RISC-V 64/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Most of the toolchains now use gcc 9.x and kernel headers 5.9, instead
of gcc 8.x and kernel headers 5.4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test Xtensa/uclibc, use a pre-built Bootlin toolchain.
To be noted: that fragment was in fact already using a Bootlin
bleeding-edge toolchain, because BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y is
missing from the fragment:
$ cat support/config-fragments/autobuild/br-xtensa-full.config >.config
$ make olddefconfig
$ grep BOOTLIN .config
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_BLEEDING_EDGE=y
# BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_STABLE is not set
The original fragment was supposed to use a stable toolchain, so we
switch to explictly use a stable Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add blurb about missing BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test x86-64/musl, use a pre-built Bootlin toolchain.
The previous configuration was for an Atom platform, but the Bootlin
toolchains only provide a Core i7 configuration. Since this is close
enough, we change to use this Core i7 configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test x86-64/uclibc, use a pre-built Bootlin toolchain.
The previous configuration was for Core2 platform, but the Bootlin
toolchains only provide a Core i7 configuration. Since this is close
enough, we change to use this Core i7 configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
