Previously, these tests had the potential for timing out with the
default 5 second timeout value if initializing /dev/urandom took too
long.
Now the tests use a 10 second timeout value.
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9bc3bbce38)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to b7d251293a, txaio would test both asyncio and twisted.
Add back the twisted sample and include the twisted package in the
config so both modes of the package are tested.
Fixes: b7d251293a ("package/python-txaio: drop python 2 support")
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 41b08a779b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit d10d22221f (utils/get-developers: read patch from stdin
when it's not a tty), get-developers accepts to read a patch fromn its
stdin when it is not a tty.
Add a test for this.
Reported-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 29e1af8430)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
get-developers will check its stdin to decide whether it is a tty or
not, and behave differently whether it is or not. So, when we run the
tests, we need an actual tty.
However, when running in a CI pipeline, like on Gitlab-CI, there is no
tty available on stdin.
Fake one. We don't need anything too fancy, so just a slave pty will
suffice.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/8830671800
Fixes: d10d22221f (utils/get-developers: read patch from stdin when
it's not a tty)
Reported-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3778f704cd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 9c0c7846cd (support/dependencies: don't check for python
on the host), we no longer check for a host python interpreter installed
on the system.
Drop the comment in support/dependencies/check-host-python3.sh, as it is
now confusing.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3722998a3d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
parser.error() reports a nice error message, that also displays a short
reminder of the available options.
Adapt the test-suite accordingly: previously, the error string was an
exact string in the stdout list, while it now is a substring in one of
the strings in stderr. The exit code changes, too.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 35f381b93e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a basic test for Xvisor RISC-V 64bit. It is running few
management and status commands. It does not start a Linux kernel.
RISC-V 64bit was chosen for this test because it was the simplest
solution to run xvisor in a qemu emulator.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e14380b3c4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mosquitto runtime test can randomly fail on slow
runners, see [1].
This commit improves this test in the following ways:
- the mosquitto_sub subscriber process is now started in a subshell
to suppress the job control messages (to prevent any spurious
messages when the job stops),
- the standard error is redirected to /dev/null, to prevent the
printing of any messages,
- the mosquitto_pub publisher process is started later, by increasing
the sleep time,
- finally, a new sleep time is introduced between the mosquitto_pub
publisher process and the check of the mosquitto_sub subscriber, to
make sure it will have time to write its output and exit.
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/8453386454
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 07a444d088)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test started failing at commit
0cad947b96
"support/testing/infra/emulator.py: fix qemu prompt detection" with the
error message
AttributeError: 'NoneType' object has no attribute 'run_command'
This is because we changed emulator.run() so that emulator.login() must
be called first. But this test skips the login and goes directly to a
shell. Use the new emulator.connect_shell() function which prepares the
shell without logging in.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5ed1fab018)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The TestInitSystemNone bypasses the normal init and instead launches
directly into a shell. So it needs to bypass the login code and go
directly to a shell.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 95e1043013)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Generating Bitcoins to an address can take longer than the current
timeout, on slow runners. This commit fixes this issue by increasing
the timeout on specific commands. This issue was also observed more
frequently on newer bitcoin-core version 28.0.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7782083081
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 859c4ea5f7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When I initially made the CVE cells collapsible, I neglected to
count the unsure CVEs. This patch adds unsure CVEs to the cell collapsing
calcualation to ensure that cells with lots of unsure CVEs actually get collapsed.
This patch also removes the "+ 1" from the cve_total calculation,
which fixes the cve_total being off-by-one.
I'm not sure *why* I did that in the first place.
demo:
https://sen-h.codeberg.page/pkg-stats-demos/@pages/add-unsure_cves-to-cve_total-calc.html
Signed-off-by: Sen Hastings <sen@hastings.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 87b8428c40)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a test that runs the dtc commandline tools. To test devicetree
compilation, we use an example devicetree from the dtc project. The
example source is GPL-2.0+ licensed.
Signed-off-by: Brandon Maier <brandon.maier@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 9b69034160)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a87abcf6da (Makefile: run PPD and RPATH fixup in host-fialize)
(sic) moved the fixups peviously done in prepare-sdk, to host-finalize.
This exposed a bug in fix-rpath, when RPATH contains multiple entries,
like: /PPD/host-foo/host/lib:/PPD/host-foo/host/lib/foo
In that situation, we want to get rid of /PPD/host-foo and replace it
with the finale HOST_DIR, so we mangle the RPATH with a sed expression.
However, that sed expression only ever replaces the first match, as it
is missing the 'g' option. Thus, the second (and following) parts of
RPATH are still referring to the PPD, and thus patchelf does not find it
relative to the final HOST_DIR, amd rops it. This eventually lead to a
final RPATH set as $ORIGIN/../lib instead of the expected
$ORIGIN/../lib:$ORIGIN/../lib/foo
This is the case for host-systemd, which installs some of its libraries
in $PREFIX/lib/systemd/ and adds an RPATH set appropriately to
/PPD/host-systemd/host/lib:/PPD/host-systemd/host/lib/systemd and that
gets incorrectly mangled.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/issues/39
Also fix a typo in the comment just above.
Reported-by: José Luis Salvador Rufo @jlsalvador
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Reviewed-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2100a76d9e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The qemu.run() method can break when a command happens to output the
string "# " to stdout. This is because qemu.run() detects when a command
has completed by searching for the shell prompt, which by default is
"# ". It then captures everything before the "# " as the commands
output, causing the rest of output to be lost.
Instead use the pexpect libraries REPLWrapper to handle running
commands. It has hooks to set a custom prompt and avoid some other
pitfalls of wrapping a shell.
We unfortunately can't reuse replwrap._repl_sh directly, because it
tries to spawn a command while we already have a qemu started. So we
need to copy that code into _repl_sh_child. While we're at it, also
define our own prompt strings.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[Arnout:
- Make all arguments to _repl_sh_spawn non-optional.
- Move non_printable_insert to a local variable instead of an argument,
we don't need to override it.
- Copy the comment from _repl_sh that explains why non_printable_insert
is needed.
- Add a comment about timeouts.
- Rename spawn to child (we don't actually spawn anything so this felt
more natural, even though the class
- Use single quotes instead of triple quotes, and explicitly escape the
nested quotes.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 0cad947b96)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
