This commit adds BR2_DOWNLOAD_FORCE_CHECK_HASHES=y in the defconfig
and adds custom hash files. The exception entry in .checkpackageignore
is also removed.
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 683681261b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The "modprobe brcmfmac" command is not necessary because this driver
is automatically loaded.
Remove the "iwconfig" line as it is considered deprecated:
warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Remove the "-Dwext" parameter as it is not supported by the default kernel
configuration:
wlan0: Unsupported driver 'wext'
Tested Wifi by following the updated commands.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 6240b75d0c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The patch bumps the Linux kernel to version 6.1.133. The size of xipImage
has increased by only 22 bytes (1671804 bytes compared to 1671782 in
version 6.1.126).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit cb6729d214)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The VideoCore blobs for the Raspberry Pi 1, 2, 3, Zero, Zero W and Zero
2 W are differents from the ones for the Raspberry Pi 4 and the Compute
Module 4.
The VideoCore blobs for the Raspberry Pi 4 are named with a 4[1] (i.e.
start4.elf, start4x.elf, start4db.elf and start4cd.elf).
This precises which VideoCore firmware blob files are present on the
Raspberry Pi 1, 2, 3, Zero W, Zero 2 W and which files are present on
the the Rapsberry Pi 4 and the Compute Module 4.
Note: The VideoCore blobs for the Raspberry Pi 5 are self-contained in
its bootloader EEPROM[1][2]; there is no additional files for pi5.
[1]: https://www.raspberrypi.com/documentation/computers/configuration.html#start-elf
[2]: https://www.raspberrypi.com/documentation/computers/config_txt.html#start_file-fixup_file
Signed-off-by: Gaël PORTAY <gael.portay+rtone@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 7ebcfe3cb9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Any Raspberry Pi may use device-tree overlays; it is not restricted to
Raspberry Pi 3 and 4.
The defconfigs for the Raspberry Pi 3, 4, 400, Zero W, Zero 2 W, Compute
Module 4 and 4s use the miniuart-bt dtoverlay to switch the Bluetooth to
the mini-UART (ttyS0) and restore UART0 (ttyAMA0) over GPIOs 14 and 15
to enable the serial console (like the Raspberry Pi 1 and 2 that have no
Bluetooth)[1][2].
As a consequence, the Raspberry Pi Zero W, Zero 2 W, 400, Compute Module
4 and 4s install the device-tree overlays as well.
This rewords the note by adding the three missing hardwares installing
the images/rpi-firmware/overlays directory. It rewords the miniuart note
at the same time.
[1]: https://www.raspberrypi.com/documentation/computers/configuration.html#uarts-and-device-tree
[2]: https://github.com/raspberrypi/linux/blob/rpi-6.6.y/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts#L4-L6
Signed-off-by: Gaël PORTAY <gael.portay+rtone@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit a642bed09a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
As the mender_x86_64_efi_defconfig does not build the xz package, creating a
boostrap image with a lzma compression results in the following error on boot:
```
Error while handling bootstrap Artifact, continuing: invalid bootstrap
Artifact: readHeaderV3: handleHeaderReads: readHeader: readNext: Failed to get
next header: reader: error reading archive: unexpected EOF
```
This also results in the same error for the generated mender image, as it's
also created with lzma compression unconditionally.
Set the compression to none to resolve the above error.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Currently, the post-build.sh script adds device_type to /var/lib/mender,
however, this doesn't work for two reasons:
1) /data/ mounts to /var/lib/mender
2) The device_type location in mender.conf points to /etc/mender/device_type.
This leads to an error during the bootstrap process because mender reads the
default device_type file installed by mender.mk in /etc/mender, leading to the
following error:
```
Error while handling bootstrap Artifact, continuing: invalid bootstrap
Artifact: readHeaderV3: handleHeaderReads: image
(device types [buildroot-x86_64]) not compatible with device BUILDROOT_DEVICE
```
Set the creation of the device_type file in board/mender/x86_64/post-build.sh
to /etc/mender/device_type to fix the error.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Enable FORCE_CHECK_HASHES to ensure that all hashes are valid even
from custom packages.
Add custom version package hashes of Linux, U-boot and TF-A.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that all Xilinx boards have been bumped to Linux 6.6.70, the Linux 6.6.60
hash can be removed.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new defconfig for the imx93-evk board that uses upstream
components, such as:
- Linux Kernel: Upstream version 6.12.16
- U-boot: Upstream version 2025.01
- ATF: Upstream version 2.12
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since commit dc0f7215c6 ("package/gcc: switch to 13.x as default"),
the Linux kernel is failing to build with this output:
In file included from ./include/linux/kernel.h:10,
from drivers/ata/libahci.c:35:
drivers/ata/libahci.c: In function ‘ahci_led_store’:
./include/linux/compiler.h:348:45: error: call to ‘__compiletime_assert_1154’ declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
348 | _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
Fix it by importing Linux upstream patch.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the hash for Linux version 6.6.70 for Xilinx boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new defconfig for the imx8mm-evk board that uses upstream
components, such as:
- Linux Kernel: Upstream version 6.12.16
- U-boot: Upstream version 2025.01
- ATF: Upstream version 2.12
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Julien Olivain <ju.o@free.fr>
[Julien: Tested on board 700-31407 REV A1]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Add a new defconfig for the imx8mn-ddr4-evk board that uses upstream
components, such as:
- Linux Kernel: Upstream version 6.12.16
- U-boot: Upstream version 2025.01
- ATF: Upstream version 2.12
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Julien Olivain <ju.o@free.fr>
[Julien: Tested on board 700-31407 REV A5]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds basic support for the new FriendlyARM NanoPi R3S board:
- https://www.friendlyelec.com/index.php?route=product/product&product_id=303
- https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R3S
Hardware Spec:
- CPU: Rockchip RK3566, Quad-core Cortex-A55
- RAM: 2GB LPDDR4X
- Ethernet: one Native Gigabit Ethernet, and one PCIe Gigabit Ethernet
- USB3.0 Host: Type-A x1
- Storage: MicroSD Slot x 1, and on-board 32GB eMMC
- Debug Serial Port: 3.3V TTL, 3-pin 2.54mm pitch connector, 1500000 bauds
- LED: LED x 3
- RTC: One low-power RTC, support backup battery input
- Buttons: 1x User button, 1x MASK button for eMMC flashing via USB-C
- Display: 1x MIPI-DSI 30-Pin FPC connector
BSP includes the following components:
- mainline ATF v2.12
- mainline U-Boot v2025.04-rc2
- mainline Linux kernel v6.13.4
Note: this defconfig is using U-Boot v2025.04-rc2 because the
NanoPi R3S support was added in upstream commit [1] first included
in v2025.04-rc1.
[1] bf4a33e725
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Add a new defconfig for the imx8mp-evk board that uses upstream
components, such as:
- Linux Kernel: Upstream version 6.12.16
- U-boot: Upstream version 2025.01
- ATF: Upstream version 2.12
Based on bcc7993283 ("configs/polyhex_debix_model_a_defconfig: new
defconfig") from Gilles Talis.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Julien:
- replace linux-headers.hash with a symlink to linux.hash
- update kernel hash to 6.12.16 to match defconfig version
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
- Bump Linux kernel to v6.12.15, update the hash file and add the
dependency on host-python3.
- Bump the FVP in the readme to version 11.27 build 19.
While at it:
- Rework the readme a bit with explicit build instructions, add a link
to the model binaries running on AArch64 host and update the model
command line to specify Arm v8.0 (as we are building for Cortex-A53).
- Turn on hashes verification and update .checkpackageignore
accordingly.
- Add myself as co-developer for this defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
[Julien: remove "Locally calculated" in linux.hash]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This configuration builds an image for the Polyhex Debix Model A SBC
DEBIX Model A is an industrial grade single board computer
powered by NXP i.MX 8M Plus applications processor
https://www.debix.io/hardware/model-a.html
- Linux Kernel: Upstream version 6.12.14
- U-boot: Upstream version 2025.01
- ATF: Upstream version 2.12
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Following the addition of the firmware upload API in linux v6.6, using
debugfs for firmware updating has been removed. Update the
update-gateware script to use the firmware upload API with sysfs and
enable applying the overlays during boot.
The fw_upload interface can detect when there is an overlay file and
will write it correctly. Use this functionality to write the overlay
file and remove dd command related code.
Fixes: 8ce97fd550 ("configs/beaglev_fire: bump Linux and U-Boot")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The k3-am62a7-sk.dts describes an I2C PMIC TPS659312 which features a
number of regulators. One of them, ldo1, is used as power supply for the
SD card host controller regulator. When the rootfs is on the SD
card (like with this configuration), we need support for these three
components (Regulator driver, I2C PMIC glue and PMIC MFD driver) to be
built-in in order to avoid boot failures.
Tested on an AM62A LP SK.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
