mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-10-01 06:21:56 -09:00
3b72a34f5b
Introduce the initial base-port support for the SK-AM62P reference board made by Texas Instruments. Signed-off-by: Bryan Brattlof <bb@ti.com> [Arnout: extend explanation of tiboot3.bin] Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Texas Instuments SK-AM62P5 Test and Development Board
Description
===========
This configuration will build a complete image for the TI SK-AM62P
board: https://www.ti.com/tool/SK-AM62P.
How to Build
============
Select the default configuration for the target:
$ make ti_am62px_sk_defconfig
Optional: modify the configuration:
$ make menuconfig
IMPORTANT: make sure to use the tiboot3 firmware that match with the TI
K3 SoC boot ROM (tiboot3-am62px-{hs-fs/hs}-evm.bin) used on the board.
Use the BR2_TARGET_TI_K3_R5_LOADER_TIBOOT3_BIN to name which tiboot3.bin
security variant we want to use.
Build:
$ make
To copy the resultimg output image file to an SD card use dd:
$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
How to Run
==========
Insert the SD card into the SK-AM62P board, and power it up through the
USB Type-C connector. The system should come up. You can use a
micro-USB cable to connect to the connector labeled UART to
communicate with the board.