mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-10-03 07:21:45 -09:00
04496503c5
Since hidapi was introduced in commit6267f34afd, it forgot to propagate some dependencies of libgudev (which existed back then). Initially libgudev was only needed when BR2_INIT_SYSTEMD=y, but still the dependencies were not propagated for the systemd case. Anyway, sincee739dd5a11, libgudev is a mandatory dependency of hidapi, independently from the selected init system. We make sure to propagate all dependencies of libgudev to hidapi, and propagate them to the reverse dependencies of hidapi. Fixes:6267f34afd("hidapi: new package") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Julien Olivain <ju.o@free.fr> (cherry picked from commit74def2cdd4) Signed-off-by: Thomas Perale <thomas.perale@mind.be>
269 lines
8.0 KiB
Plaintext
269 lines
8.0 KiB
Plaintext
config BR2_PACKAGE_OPENOCD
|
|
bool "openocd"
|
|
select BR2_PACKAGE_JIMTCL
|
|
help
|
|
OpenOCD - Open On-Chip Debugger
|
|
|
|
http://openocd.sourceforge.net/
|
|
|
|
if BR2_PACKAGE_OPENOCD
|
|
|
|
comment "Adapters"
|
|
|
|
config BR2_PACKAGE_OPENOCD_CMSIS_DAP
|
|
bool "CMSIS-DAP compliant debuggers"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
depends on BR2_PACKAGE_HAS_UDEV # hidapi
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # hidapi
|
|
depends on BR2_USE_MMU # hidapi
|
|
depends on BR2_USE_WCHAR # hidapi
|
|
select BR2_PACKAGE_LIBUSB
|
|
select BR2_PACKAGE_HIDAPI
|
|
help
|
|
Enable support for CMSIS-DAP compliant debuggers (i.e
|
|
Atmel/Microchip EDBG, etc.)
|
|
|
|
comment "CMSIS-DAP support needs udev, toolchain w/ NPTL, gcc >= 4.9, wchar"
|
|
depends on BR2_USE_MMU
|
|
depends on !BR2_PACKAGE_HAS_UDEV || \
|
|
!BR2_TOOLCHAIN_HAS_THREADS_NPTL || \
|
|
!BR2_USE_WCHAR || \
|
|
!BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
|
|
|
|
config BR2_PACKAGE_OPENOCD_FTDI
|
|
bool "MPSSE mode of FTDI based devices"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the MPSSE mode of FTDI
|
|
(FT2xxx/FT4xxx) based devices (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_STLINK
|
|
bool "ST-Link JTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the ST-Link JTAG
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_TI_ICDI
|
|
bool "TI ICDI JTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the TI ICDI JTAG
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_ULINK
|
|
bool "Keil ULINK JTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the Keil ULINK JTAG
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_UBLASTER2
|
|
bool "Altera USB-Blaster II Compatible"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the Altera USB-Blaster
|
|
II Compatible (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_JLINK
|
|
bool "Segger J-Link JTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Segger J-Link JTAG Programmer and clone such as Atmel
|
|
SAM-ICE
|
|
|
|
config BR2_PACKAGE_OPENOCD_OSDBM
|
|
bool "OSDBM JTAG (only) Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the OSBDM (JTAG only)
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_OPENDOUS
|
|
bool "eStick/opendous JTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the eStick/opendous JTAG
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_AICE
|
|
bool "Andes JTAG Programmer"
|
|
depends on BR2_USE_MMU # use fork()
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the Andes JTAG
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_VSLLINK
|
|
bool "Versaloon-Link JTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
select BR2_PACKAGE_LIBUSB_COMPAT
|
|
help
|
|
Enable building support for the Versaloon-Link JTAG
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_USBPROG
|
|
bool "USBProg JTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
select BR2_PACKAGE_LIBUSB_COMPAT
|
|
help
|
|
Enable building support for the USBProg JTAG
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_RLINK
|
|
bool "Raisonance RLink JTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
select BR2_PACKAGE_LIBUSB_COMPAT
|
|
help
|
|
Enable building support for the Raisonance RLink
|
|
JTAG Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_ARMEW
|
|
bool "Olimex ARM-JTAG-EW Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
select BR2_PACKAGE_LIBUSB_COMPAT
|
|
help
|
|
Enable building support for the Olimex ARM-JTAG-EW
|
|
Programmer (default is auto)
|
|
|
|
config BR2_PACKAGE_OPENOCD_XDS110
|
|
bool "TI XDS110 Debug Probe"
|
|
depends on BR2_USE_WCHAR
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb
|
|
select BR2_PACKAGE_LIBUSB
|
|
help
|
|
Enable building support for the TI XDS110 Debug Probe.
|
|
|
|
config BR2_PACKAGE_OPENOCD_PARPORT
|
|
bool "pc parallel port driver"
|
|
help
|
|
Enable building the pc parallel port driver
|
|
|
|
config BR2_PACKAGE_OPENOCD_VPI
|
|
bool "JTAG VPI"
|
|
help
|
|
Enable building support for JTAG VPI
|
|
|
|
config BR2_PACKAGE_OPENOCD_UBLASTER
|
|
bool "Altera USB-Blaster"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb
|
|
select BR2_PACKAGE_LIBFTDI1
|
|
help
|
|
Enable building support for the Altera USB-Blaster
|
|
using the libftdi driver, opensource alternate of
|
|
FTD2XX
|
|
|
|
config BR2_PACKAGE_OPENOCD_AMTJT
|
|
bool "Amontec JTAG-Accelerator"
|
|
help
|
|
Enable building the Amontec JTAG-Accelerator driver
|
|
|
|
if BR2_arm
|
|
|
|
config BR2_PACKAGE_OPENOCD_EP93XX
|
|
bool "EP93xx based SBCs"
|
|
help
|
|
Enable building support for EP93xx based SBCs
|
|
|
|
config BR2_PACKAGE_OPENOCD_AT91RM
|
|
bool "AT91RM9200 based SBCs"
|
|
help
|
|
Enable building support for AT91RM9200 based SBCs
|
|
|
|
endif # BR2_arm
|
|
|
|
if BR2_arm || BR2_aarch64
|
|
|
|
config BR2_PACKAGE_OPENOCD_BCM2835
|
|
bool "bitbanging on BCM2835"
|
|
help
|
|
Enable building support for bitbanging on BCM2835
|
|
(as found in Raspberry Pi)
|
|
|
|
config BR2_PACKAGE_OPENOCD_IMXGPIO
|
|
bool "bitbanging on NXP i.MX family"
|
|
help
|
|
Enable support for bitbanging on NXP i.MX family
|
|
(as found in SolidSense N6, N8, etc.)
|
|
|
|
endif # BR2_arm || BR2_aarch64
|
|
|
|
config BR2_PACKAGE_OPENOCD_GW16012
|
|
bool "Gateworks GW16012 JTAG Programmer"
|
|
help
|
|
Enable building support for the Gateworks GW16012
|
|
JTAG Programmer
|
|
|
|
config BR2_PACKAGE_OPENOCD_PRESTO
|
|
bool "ASIX Presto Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb
|
|
select BR2_PACKAGE_LIBFTDI1
|
|
help
|
|
Enable building support for ASIX Presto Programmer
|
|
using the libftdi driver
|
|
|
|
config BR2_PACKAGE_OPENOCD_OPENJTAG
|
|
bool "OpenJTAG Programmer"
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
|
|
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb
|
|
select BR2_PACKAGE_LIBFTDI1
|
|
select BR2_PACKAGE_LIBUSB
|
|
select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h
|
|
help
|
|
Enable building support for the OpenJTAG Programmer
|
|
with ftdi driver
|
|
|
|
config BR2_PACKAGE_OPENOCD_BUSPIRATE
|
|
bool "Buspirate"
|
|
help
|
|
Enable building support for the Buspirate
|
|
|
|
config BR2_PACKAGE_OPENOCD_SYSFS
|
|
bool "programming via sysfs gpios"
|
|
help
|
|
Enable building support for programming driven via
|
|
sysfs gpios.
|
|
|
|
# Many adapters need libusb or libusb-compat, which require threads and
|
|
# gcc >= 4.9 but we don't want to duplicate this comment for all
|
|
# adapters that select libusb or libusb-compat.
|
|
comment "many openocd adapters needs a toolchain w/ threads, gcc >= 4.9"
|
|
depends on !BR2_TOOLCHAIN_HAS_THREADS || \
|
|
!BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
|
|
|
|
comment "xds110 adapter support needs toolchain w/ wchar"
|
|
depends on !BR2_USE_WCHAR
|
|
depends on BR2_TOOLCHAIN_HAS_THREADS && BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
|
|
|
|
endif # BR2_PACKAGE_OPENOCD
|