mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-09-30 22:11:59 -09:00
b7dbdd3d77
This patch switches the board support of the Radxa Rock 5B from using a custom kernel to mainline linux 6.7.4. Thereby patches, which became redundant, are removed, as well as device tree modifications and no longer needed hash files. The needed ethernet drivers are activated via the kernel config fragment file. Also the board support is switched from using a uboot script and a uEnv file to using extlinux. Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Romain Naour <romain.naour@smile.fr>
58 lines
1.0 KiB
Plaintext
58 lines
1.0 KiB
Plaintext
RADXA ROCK 5B
|
|
==============
|
|
https://wiki.radxa.com/Rock5/hardware/5b
|
|
|
|
Build:
|
|
======
|
|
$ make rock5b_defconfig
|
|
$ make
|
|
|
|
Files created in output directory
|
|
=================================
|
|
|
|
output/images
|
|
.
|
|
├── Image
|
|
├── rk3588_bl31_v1.40.elf
|
|
├── rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin
|
|
├── rk3588-rock-5b.dtb
|
|
├── rootfs.ext2
|
|
├── rootfs.ext4
|
|
├── rootfs.tar
|
|
├── sdcard.img
|
|
├── u-boot.bin
|
|
└── u-boot-rockchip.bin
|
|
|
|
Creating bootable SD card:
|
|
==========================
|
|
|
|
Simply invoke (as root)
|
|
|
|
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
|
|
|
|
Where X is your SD card device.
|
|
|
|
Booting:
|
|
========
|
|
|
|
Serial console:
|
|
---------------
|
|
The Rock 5B has a 40-pin GPIO header. Its layout can be seen here:
|
|
https://wiki.radxa.com/Rock5/hardware/5b/gpio
|
|
|
|
The Uart pins are as follows:
|
|
|
|
pin 6: gnd
|
|
pin 8: tx
|
|
pin 10: rx
|
|
|
|
Baudrate for this board is 1500000.
|
|
|
|
Login:
|
|
------
|
|
Enter 'root' as login user, and the prompt is ready.
|
|
|
|
wiki link:
|
|
----------
|
|
https://forum.radxa.com/c/rock5
|