The patch bumps the Linux kernel to version 5.15.162 for both
configurations and U-Boot to version 2024.04 for the SD one. Using the
same kernel will subsequently allow adding the hash files in a single
location.
Furthermore, now even the xip configuration uses the same headers as
the used Linux kernel.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See here for a ChangeLog:
https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-20-current.md
20.8.1 contains a fix for CVE-2024-35190. However, the vulnerability
was introduced in commit 68a49128253f677f9e1b235c70d2316342372f7d
between 20.7.0 and 20.8.0, and Buildroot was using 20.7.0, so we were
not affected by this vulnerability.
Patch 0005 is applied upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package compilation for the raspberrypi3_qt5we_defconfig raises the
following error:
In file included from buildroot/output/build/snappy-1.1.10/snappy.cc:29:
buildroot/output/build/snappy-1.2.1/snappy-internal.h: In function ‘snappy::internal::V128 snappy::internal::V128_Shuffle(V128, V128)’:
buildroot/output/build/snappy-1.2.1/snappy-internal.h:109:10: error: ‘vqtbl1q_u8’ was not declared in this scope; did you mean ‘vtbl1_u8’?
109 | return vqtbl1q_u8(input, shuffle_mask);
| ^~~~~~~~~~
| vtbl1_u8
make[4]: *** [CMakeFiles/snappy.dir/build.make:118: CMakeFiles/snappy.dir/snappy.cc.o] Error 1
The issue was raised by commit b3fb0b5b4b076 ("Enable vector byte
shuffle optimizations on ARM NEON") contained in version 1.1.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As requested by Buildroot's autobuilder tracking outdated packages.
Build tested with:
$ ./utils/test-pkg -c ltris.config -p ltris -a
arm-aarch64 [ 1/41]: OK
bootlin-aarch64-glibc [ 2/41]: OK
bootlin-arcle-hs38-uclibc [ 3/41]: OK
bootlin-armv5-uclibc [ 4/41]: OK
bootlin-armv7-glibc [ 5/41]: OK
bootlin-armv7m-uclibc [ 6/41]: SKIPPED
bootlin-armv7-musl [ 7/41]: OK
bootlin-m68k-5208-uclibc [ 8/41]: SKIPPED
bootlin-m68k-68040-uclibc [ 9/41]: OK
bootlin-microblazeel-uclibc [10/41]: OK
bootlin-mipsel32r6-glibc [11/41]: OK
bootlin-mipsel-uclibc [12/41]: OK
bootlin-nios2-glibc [13/41]: OK
bootlin-openrisc-uclibc [14/41]: OK
bootlin-powerpc64le-power8-glibc [15/41]: OK
bootlin-powerpc-e500mc-uclibc [16/41]: OK
bootlin-riscv32-glibc [17/41]: OK
bootlin-riscv64-glibc [18/41]: OK
bootlin-riscv64-musl [19/41]: OK
bootlin-s390x-z13-glibc [20/41]: OK
bootlin-sh4-uclibc [21/41]: OK
bootlin-sparc64-glibc [22/41]: OK
bootlin-sparc-uclibc [23/41]: OK
bootlin-x86-64-glibc [24/41]: OK
bootlin-x86-64-musl [25/41]: OK
bootlin-x86-64-uclibc [26/41]: OK
bootlin-x86-i686-musl [27/41]: OK
bootlin-xtensa-uclibc [28/41]: OK
br-arm-basic [29/41]: OK
br-arm-full-nothread [30/41]: OK
br-arm-full-static [31/41]: OK
br-i386-pentium4-full [32/41]: OK
br-mips64-n64-full [33/41]: OK
br-mips64r6-el-hf-glibc [34/41]: OK
br-powerpc-603e-basic-cpp [35/41]: OK
br-powerpc64-power7-glibc [36/41]: OK
linaro-aarch64-be [37/41]: OK
linaro-aarch64 [38/41]: OK
linaro-arm [39/41]: OK
sourcery-mips64 [40/41]: OK
sourcery-mips [41/41]: OK
41 builds, 2 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
$ cat ltris.config
BR2_PACKAGE_LTRIS=y
BR2_PACKAGE_LTRIS_AUDIO=y
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot commit [1] updated riscv-isa-sim (Spike), which now includes
a NS16550 uart emulation. The Kernel config fragment was introduced to
work with older HTIF interface from Spike.
For more information about the HTIF/NS16550 in Spike, see the commit
log [2].
This commit removes this Kernel config fragment, since it is no longer
needed.
[1] 853b7661bf
[2] 38c581b05c
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
7efd75867c ("configs/ti_am64x_sk_defconfig:
update U-Boot to v2024.04") updated U-Boot and the ti-k3-r5-loader to
2024.04, but did not update the hash files in board/ti/am62x-sk/. It
ended up working for now, because the official versions of boot/uboot
and boot/ti-k3-r5-loader/ also use 2024.04 and therefore have this
hash, but it would have started failing as soon as boot/uboot and/or
boot/ti-k3-r5-loader official version were updated.
Signed-off-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
cc2910a7db ("configs/ti_am62x_sk_defconfig:
update U-Boot to v2024.04") updated U-Boot and the ti-k3-r5-loader to
2024.04, but did not update the hash files in board/ti/am62x-sk/. It
ended up working for now, because the official versions of boot/uboot
and boot/ti-k3-r5-loader/ also use 2024.04 and therefore have this
hash, but it would have started failing as soon as boot/uboot and/or
boot/ti-k3-r5-loader official version were updated.
Signed-off-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
imx_gpio driver is used on NXP i.MX family of SoCs and required e.g. for
programming noridc microcontrollers on SolidRun SolidSense family of
devices.
Add new config variable BR2_PACKAGE_OPENOCD_IMXGPIO for imx_gpio driver.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We can use urllib.request without adding any addition lines of code
compared with requests which is not part of the stdlib.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add missing stdio.h include. Without this includes, the build fails
with the following error under GCC 14.x:
../../../com32/lib/syslinux/debug.c: In function ‘syslinux_debug’:
../../../com32/lib/syslinux/debug.c:91:5: error: implicit declaration of function ‘printf’ [-Wimplicit-function-declaration]
91 | printf("Dynamic debug unavailable\n");
Signed-off-by: Lance Fredrickson <lancethepants@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GNU Octave supports the --with-openssl configure option since v4.0.0.
For reference, commit 40ea68b4b2 "package/octave: new package"
introduced the package at v7.1.0.
This commits adds this optional support.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mathieu privately informed me that he no longer has access to the
TS4900 board, he is therefore unable to maintain this board moving
forward. Let's drop his entry from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Import a patch that has been backported by upstream to the 2.44 release
branch that fixes the build when the target is an ARM processor that
supports NEON instructions.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
tpm2-tss support is available since gnutls 3.7.3 using
--{with,without}-tpm2 configure option [1].
Since the option is not handled by gnutls package, tpm2-tss support
can be enabled if tpm2-tss package is build before gnutls package.
Likewise, tpm2-tss support can be enabled for the gnutls host variant
if tpm2-tss libraries are installed on the host.
Make sure to disable tpm2-tss support for the host-gnutls.
[1] https://lists.gnupg.org/pipermail/gnutls-help/2022-January/004736.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
