ipsec-tools currently fails to build for Blackfin due to GLOB_TILDE
not being supported in Blackfin external toolchains. However, after
fixing this problem (which will be fixed in later versions of the
Blackfin external toolchains) allows to discover that ipsec-tools uses
fork() anyway.
Therefore, this patch simply marks ipsec-tools as not available on
non-MMU systems.
Consequently, it fixes:
http://autobuild.buildroot.org/results/fc4/fc4ef4101a20e64eb52da56557d6996dd73b3d86/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fixes
http://autobuild.buildroot.net/results/27a/27a674c6a19a729fae5cc33de0360b2a061930c1/
This patch indeed fixes several problems based on the autobuilder-defconfig used.
1) Add missing dependencies when opengl is detected by webkit to satisfy autobuilder:
checking which GPU acceleration backend to use... opengl
checking for XCOMPOSITE... yes
checking for XDAMAGE... no
configure: error: Package requirements (xdamage) were not met:
2) ... but opengl should not have been detected with the used defconfig:
$ grep MESA .config
BR2_PACKAGE_MESA3D=y
which will lead to a link error although webkit configure found all dependencies:
/home/br2/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/4.7.3/../../../../mips-linux-gnu/bin/ld: cannot find -lGL
3) same is valid for glx, having GL/glx.h means nothing
4) add some configure options for gles/egl as well, just to make sure ;)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, we were keeping gdb version 6.6a specially for
Blackfin. However, it turns out that support for Blackfin was merged
in gdb 7.4 (cross-gdb and gdbserver, not native gdb on the
target). Therefore, we can simply remove the support for version 6.6a
and use 7.5 as the default.
Both 7.4 and 7.5 were built tested, including cross-gdb and gdbserver.
The original reason to switch to 7.x is that 6.6a doesn't build for
Blackfin FLAT, and while it builds for Blackfin FDPIC, it only builds
libiberty.a and does not actually build a cross debugger.
Fixes:
http://autobuild.buildroot.org/results/b47/b47f85553336b7f63ee4ecdf8598374ce4a225a3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of host-gdb 7.4 fails due to some texinfo issue. To avoid
that, use the same trick as is used for the target variant of gdb:
tell gdb that makeinfo is missing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The file external.mk was included before fs/common.mk, so it was impossible
to add rootfs targets using the BR2_EXTERNAL mechanism.
This change moves the inclusion of fs/common.mk before external.mk to allow
this.
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
[ThomasDS: rebased, update commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Makefile's target "install-magickincarchHEADERS" and "magick-install-data-local"
install both the same file (magick-baseconfig.h) in the same time...
The problem can be reproduced with:
mkdir /tmp/bar
/usr/bin/install -c -m 644 foo /tmp/bar &
/usr/bin/install -c -m 644 foo /tmp/bar/foo
/usr/bin/install: cannot create regular file '/tmp/bar/foo' : File exists
So, remove one of them.
Fixes:
http://autobuild.buildroot.net/results/d34/d34077ce582866c50bbd90de10bbe593e39463f1/build-end.log
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There will soon be new options to the graph-depends script, which we
can only sanely pass via environment variables.
Currently, we use such an environment variable to pass the maximum depth
of the dependency graph; the name of that variable is explicit that it
contains just the depth.
However, there has been so far no release of Buildroot which would make
use of that variable, so no user should have come to rely on it.
Rename that variable so it is less specific, and more generic, so it can
be used to pass more options to graph-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to tell the duma Makefile what OS we're gonna run on, or it
uses default values.
It turns out the default values are the same as for OS=linux (and so
this change should be a no-op), but it's just better to force it, and
it avoids a warning during the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though pulseaudio has some HAVE_FORK compile-time conditionals to
avoid using fork(), those parts of pulseaudio are not using it. Since
using pulseaudio on !MMU platforms is fairly unlikely, we simply
disable it when no MMU is available, and propagate this dependency to
the appropriate locations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fluxbox uses the fork() system call, not available on noMMU
platforms. It's also fairly unlikely to have to use a full-blown
X.org window manager on such platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
php-imagick selects imagemagick, and imagemagick 'depends on
BR2_USE_MMU', but this dependency was not propagated to
php-imagick. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zyre selects filemq, and filemq 'depends on BR2_USE_MMU', but this
dependency was not propagated to zyre. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sane-backends currently doesn't build with the ADI external
toolchains, due to an internal compiler failure. However, using the
internal toolchain backend for Blackfin goes past this internal
compiler failure, but raises the problem that sane-backends uses
fork(). Sane-backends has a --enable-pthreads option that allows to
use threads instead of forking in some parts of sane, but there are
still some other areas of sane-backends that continue to use fork().
Since the probability of using sane-backends on a noMMU system is
fairly small, we'll just disable this package for now on such
architectures, until someone cares enough to investigate deeper.
Fixes:
http://autobuild.buildroot.org/results/136/136100c3a2d843b7915fdd83d23d8b301fee577e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
elfutils depends on !BR2_avr32, but this dependency was not properly
propagated to the comment about toolchain options. This commit fixes
that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but cleaner.
Remove the double --disable-manuals and move the debug handling together
with the other optional configure flags.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt5Quick1 module doesn't need OpenGL libs and declarative module.
This module can be used to port qt4 qml apps to qt5. Patch has been tested
with linuxfb output plugin.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The --with-fontdir switch has been substituted by the --with-fontrootdir
switch a few versions ago. The use of the old configuration switch was
causing error messages like the following:
_FontTransOpen: Unable to Parse address ${prefix}/share/fonts/X11/*/
[dix] Could not init font path element ${prefix}/share/fonts/X11/*/, removing from list!
Signed-off-by: Filippo Sironi <filippo.sironi@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this patch fixes :
luajit: error while loading shared libraries: libluajit-5.1.so.2: cannot open shared object file: No such file or directory
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Two fixes for xtensa are still applicable to gdb-7.5.1, which is now the
default; copy them from 7.4.1. This fixes native gdb build for xtensa.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
jack2 uses Waf 1.6.11. The waf configure program combines a part of
python script with a compiled blob. According to Waf documentation,
waf currently supports python interpreter from version 2.3 to 3.1.
However, Buildroot provides python-3.4. So, let's uses host python2
interpreter for building jack2.
This patch also cleanup whitespace, replacing wrongly used spaces with
tabs.
Fixed:
http://autobuild.buildroot.net/results/913/913bb1836076be9f201bf6641c7614708d6916bc/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
