Add a package which deploys the NXP MC (Management Complex) firmware
to the target. This is necessary for NXP DPAA2 SoCs (LS1088A, LS2080A,
LS2088A, LX2160A).
The MC firmware is deployed by default to the $O/images/ folder, where
it can be used by post-build scripts. Additionally, if
BR2_PACKAGE_QORIQ_MC_BINARY_TARGET_INSTALL_PATH is specified and if the
board mcinitcmd is written as such as to pick it up, it is optionally
deployed to the filesystem.
The API exposed by the MC firmware respects backwards compatibility
principles, which means that the latest firmware version can always be
(and should always be) used on a platform, irrespective of the Linux,
U-Boot, RCW and restool versions, even though the latest features might
not be used by older API consumers.
In terms of forwards compatibility, old MC firmware versions can be
used as long as the qoriq-restool package is built with a
MC_VERSION_COMPATIBLE variable (located in its Makefile, signifying
"minimum compatible version") older than, or equal to it.
If the use of qoriq-restool is not desired (networking objects are
statically created by the DPL), old MC firmware versions are supported
by U-Boot and the Linux kernel with a limited feature set. Thus, it
is still possible to an extent to use firmware versions older than
MC_VERSION_COMPATIBLE.
According to the upstream maintainer, the latest MC firmware version
is identified by the fact that it is always located at the HEAD of the
"master" branch:
https://lore.kernel.org/buildroot/482493f17e63d2b4cb285b50049ed8e6@free.fr/T/#m62c3ec04ba546ac9b0a194d13bc35fedeaa9deb0
Currently, the latest MC firmware version is 10.39.0. This version
should be in sync with the qoriq-mc-utils package.
At this stage, the latest lf-6.12.3-1.0.0 NXP BSP has qoriq-restool with
an MC_VERSION_COMPATIBLE='10.32.0', which means that it supports this MC
firmware version.
https://github.com/nxp-qoriq/restool/blob/lf-6.12.3-1.0.0/Makefile#L23
Note that the MC firmware also used to be distributed through
linux-firmware:
https://web.git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/dpaa2/mc?h=20250311
I don't know what was the reason for doing that, but it stopped being
updated and the versions there are quite old.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
linux-tools opportunistically set linux as only a patch dependency. This
unfortunately introduces a race condition in the shared linux scripts
when using PER_PACKAGE_DIRECTORIES and using top level parallelism. The
race manifests as the error "/bin/sh: 1: scripts/basic/fixdep:
Permission denied". This happens when the linux package and the
linux-tools package are being compiled in parallel.
The linux-tools currently using fixdep are perf and rtla. When the
timing is correct, perf, rtla, or the kernel Makefile will try to use
fixdep while one of the others is compiling fixed, resulting in fixdep
being briefly not available.
To fix this, set linux as a build dependency instead of a patch
dependency.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the riscv vector extension is enabled for pixman, it assumes that
the kernel headers also support riscv vector. Apply a patch that
disables riscv vector in pixman if the Linux headers do not support
COMPAT_HWCAP_ISA_V which pixman requires for vector runtime detection.
This issue exists since pixman 0.44.0, which Buildroot started using
in commit ba2fb599cd.
Fixes:
http://autobuild.buildroot.net/results/4ecdf5320716ec8b39f09fde3fcbbdcdb557f8ab/
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pixman defaults to building with the riscv vector extension. Instead,
only build with vector if the buildroot user has selected
BR2_RISCV_ISA_RVV.
This option exists since pixman 0.44.0, to which the Buildroot package
was updated as part of Buildroot commit
ba2fb599cd.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will be part of 6.15.0 release.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[Julien: fix check-package error by adding "Upstream:" tag in patch]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This release called "Бузина" (Elderberry) of the stable libmdbx branch.
Please visit https://libmdbx.dqdkfa.ru for more information, changelog,
credits and acknowledgments, documentation, C++ API description and
links to the original git repo with the source code. Questions, feedback
and suggestions are welcome to the Telegram' group https://t.me/libmdbx.
Since 0.13.x libmdbx is licensed under the Apache 2.0 License.
For notes about the license change, please refer to the COPYRIGHT file
within original libmdbx source code repository
https://gitflic.ru/project/erthink/libmdbx
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The "modprobe brcmfmac" command is not necessary because this driver
is automatically loaded.
Remove the "iwconfig" line as it is considered deprecated:
warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Remove the "-Dwext" parameter as it is not supported by the default kernel
configuration:
wlan0: Unsupported driver 'wext'
Tested Wifi by following the updated commands.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Both busybox.config and busybox-minimal.config set
CONFIG_FEATURE_EDITING_SAVEHISTORY=y. This causes the Busybox shell to
write the history file after every command, which can be a problem on
storage with limited write cycles (e.g. eMMC).
Set CONFIG_FEATURE_EDITING_SAVE_ON_EXIT=y to change behavior to write
the history file only on exit, which reduces writes without losing the
history feature.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Restart would regularly fail because it did not wait for the old
process to be gone before starting the new one. Rewrite the script
according to current style to fix that, and add reload support (see
mosquitto docs for limitations of reload).
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of Flutter 3.27.4, the flutter-engine github repository is archived, and the
flutter-engine source code now resides at https://github.com/flutter/flutter/.
Because of the above, the following changes must occure:
- Paths are now prefixed with engine/src.
- The "name" field in the dot-gclient file is now "./", and the gen-tarball
script:
- Makes the dl-tmp/src dir
- Copies the dot-gclient file to the dl-tmp/src dir
- Runs gclient.py inside of the dl-tmp/src dir
Without these changes, gclient creates two directores:
dl-tmp/src/flutter and dl-tmp/src/engine, and cloning fails with the following
error:
```
python3: can't open file 'dl-tmp/src/engine/src/flutter/tools/pub_get_offline.py':
[Errno 2] No such file or directory
```
because the file resides at src/flutter/engine/src/flutter/tools.
Changing the name from src/flutter to ./ and running gclient.py directly in
the src directory creates a proper directory structure suitable for compiling.
Of course, this also means there is a new pushd in the gen_tarball method to
move to ${SCRATCH_DIR} to ensure the tarball is generated outside of the
source directory.
Tested with run-tests tests.package.test_flutter.TestFlutter.test_run.
The license file has changed, but it's still BSD-3-Clause.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test timeout is no longer sufficient, so double it.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Importing urllib3 already allows us to check that for example zlib can
be loaded at runtime.
For good measure, also create the PoolManager object mentioned in the
user guide ([1]), and check that we can normalize a URL like it is
done in urllib3's 'test/test_util.py'.
[1]: https://urllib3.readthedocs.io/en/stable/user-guide.html
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
See release announce [1].
The src/mygetopt.h file license was updated from BSD-4-Clause to
BSD-2-Clause in upstream commit [2]. This change makes this file using
the same license as most other files. So this commit removes the
license entry for this file and update the _LICENSE accordingly.
This commit also replaces the mention "one file" on BSD-3-Clause, to
the actual file name using it, which is "vasprintf.c".
This commit also updates the Config.in package homepage URL,
to use https.
[1] https://mailman.astron.com/pipermail/file/2024-November/001435.html
[2] d605bb4047
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
