Force cmake packages to use the "Unix Makefiles" generator
in case CMAKE_GENERATOR is set in the host environment. This
patch further isolates the buildroot build environment from
the host.
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a5d8582e37)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since glibc 2.33 (upstream commit
7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed
to build glibc for RISC-V 32-bit. Indeed
sysdeps/unix/sysv/linux/riscv/configure.ac contains:
if test $libc_cv_riscv_int_abi = ilp32; then
arch_minimum_kernel=5.4.0
fi
In order to take into account this dependency, we add the appropriate
logic in package/glibc/Config.in and
toolchain/toolchain-buildroot/Config.in.
This change means that if headers < 5.4.0 are selected, then no C
library at all will be available for RISC-V 32-bit, as glibc is the
only C library supporting RISC-V 32-bit currently. However, thanks to
the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the
choice...endchoice for the C library selection will not be empty,
allowing the user to see the Config.in comment explaining why glibc
can't be selected.
Therefore, technically this commit does prevent from creating a
configuration with RISC-V 32-bit and headers < 5.4.0, but it will have
BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by
package/Makefile.in, which aborts the build early on pointing out that
the configuration is invalid.
Fixes:
http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2b3f0153bb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the internal toolchain backend, we have a choice..endchoice block
to allow the user to select the C library, between glibc, uClibc and
musl.
However, there are situations were no C library at all is
supported. In this case, the choice does not appear, and does not
allow to see the Config.in comments that are within the
choice..endchoice block and that may explain why no C library is
available.
For example, on RISC-V 32-bit, the only C library supported is glibc,
and the minimum kernel header version required by glibc on this
architecture is 5.4.0. In a future commit, we are going to add this
dependency on glibc (to fix build issues on configurations that have
headers < 5.4.0). But since glibc is the only supported C library on
RISC-V 32-bit, it means that the choice..endchoice for the C library
contains no entry, preventing from seeing the Config.in comment.
To address this issue, this commit adds a "dummy"
BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the
choice..endchoice only when no C library is available. Thanks to this,
the choice..endchoice is never empty, and the Config.in comments can
be seen.
If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the
build will anyway abort early because package/Makefile.in has a check
to verify that a C library is selected, and aborts the build if not.
Some could say that the problem should be resolved by instead
preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that
is difficult to do as the user can choose a custom header version, or
simply specific that (s)he wants to use the headers of the kernel
being built. In those situations, it's difficult to prevent selecting
headers < 5.4.0.
Prevent random configurations from triggering a build failure in our
autobuilders, by excluding that symbol from accepted configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update genrandconfig]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e1550ef755)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of NodeJS fails on mipsel due to an issue in the V8 code:
../../deps/v8/src/compiler/backend/mips/code-generator-mips.cc:4106:48: error: call of overloaded 'Operand(int64_t)' is ambiguous
4106 | Operand(static_cast<int64_t>(0)));
There is apparently a lack of maintenance of the MIPS port of V8, as
is discussed in the Github issue at
https://github.com/nodejs/node/issues/26179.
Until this get improved/fixed, our best option is to drop support for
MIPS in our NodeJS package.
Fixes:
http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 69d311687a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the case that the WOLFSSL_CALLBACKS macro is set when building
wolfSSL, there is a potential heap over read of 5 bytes when handling
TLS 1.3 client connections. This heap over read is limited to wolfSSL
builds explicitly setting the macro WOLFSSL_CALLBACKS, the feature does
not get turned on by any other build options. The macro
WOLFSSL_CALLBACKS is intended for debug use only, but if having it
enabled in production, users are recommended to disable
WOLFSSL_CALLBACKS. Users enabling WOLFSSL_CALLBACKS are recommended to
update their version of wolfSSL. CVE 2022-42905
https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 18b5d6205d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version
1.9.4 in commit 1f54af8c4f:
compiling dynamic library 1.9.4
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/crt1.o: in function `_start':
(.text+0x1c): undefined reference to `main'
Fixes:
- http://autobuild.buildroot.org/results/9187852fb7a869bf5595275d47929632659a4407
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 85c20ffa95)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LZ4 v1.9.4 is a maintenance release, featuring a substantial amount
(~350 commits) of minor fixes and improvements, making it a recommended
upgrade. The stable portion of liblz4 API is unmodified, making this
release a drop-in replacement for existing features.
- Drop patch (already in version)
- Update hash of lib/LICENSE (update in year with
87a80acbe7)
https://github.com/lz4/lz4/releases/tag/v1.9.4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1f54af8c4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses
cookies from an HTTP(S) server, it accepts cookies using control codes
(byte values below 32). When cookies that contain such control codes are
later sent back to an HTTP(S) server, it might make the server return a
400 response. Effectively allowing a "sister site" to deny service to
siblings.
Drop upstream patches and autoreconf.
Cc: Matt Weber <matthew.weber@collins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 400b63432e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A double-free condition exists in contrib/shpsort.c of shapelib 1.5.0
and older releases. This issue may allow an attacker to cause a denial
of service or have other unspecified impact via control over malloc.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 810c0eecf1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set ac_cv_prog_A2X to disable build of documentation and avoid the
following build failure without a working a2x raised since at least bump
to version 1.1.1 in commit ad21d84a58:
a2x -v -f manpage doc/man/usbguard.1.adoc -D ./$(dirname doc/man/usbguard.1.roff)
a2x -v -f manpage doc/man/usbguard-dbus.8.adoc -D ./$(dirname doc/man/usbguard-dbus.8.roff)
/nvmedata/autobuild/instance-5/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc')
Fixes:
- http://autobuild.buildroot.org/results/e41950f3cd4bd83d9b067af498757cb9d2f207ef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit cff78c34fb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libbpf build system currently uses the output of "uname -m" to
determine if the library should be installed in "lib" or
"lib64". However, uname -m returns the architecture of the build
machine, which often has nothing to do with the target CPU
architecture.
A patch has been submitted and accepted upstream to address this
issue, by using the $(CC) -dumpmachine output instead. This ensures
libbpf is installed in either "lib" or "lib64" depending on the
bitness of the target CPU architecture.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c86b69a16d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since Buildroot commit 3145adfb69 ("package/libbpf: needs headers >=
4.13"), libbpf depends on Linux headers >= 4.13. This requirement
renders the explicit list of supported architectures, previously added
in f693354c30 overly restrictive, as the syscall number for bpf(2)
has been defined since Linux 3.18.
Commit f693354c30 ("package/libbpf: add
BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS") was introduced to fix a build issue
where a toolchain using very old kernel headers (3.13) failed to build
libbpf for ARM, but these architecture dependencies are no longer
needed due to the bump on the kernel headers version requirement.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 51ecbe500f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.18.7 (released 2022-10-04) includes security fixes to the archive/tar,
net/http/httputil, and regexp packages, as well as bug fixes to the
compiler, the linker, and the go/types package.
go1.18.8 (released 2022-11-01) includes security fixes to the os/exec and
syscall packages, as well as bug fixes to the runtime.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2022-38784: Poppler prior to and including 22.08.0 contains an
integer overflow in the JBIG2 decoder
(JBIG2Stream::readTextRegionSeg() in JBIGStream.cc). Processing a
specially crafted PDF file or JBIG2 image could lead to a crash or the
execution of arbitrary code. This is similar to the vulnerability
described by CVE-2022-38171 in Xpdf.
- Drop patch (already in version)
https://gitlab.freedesktop.org/poppler/poppler/-/blob/poppler-22.10.0/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bd35c0f363)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure file is a shell script which searches for a predefined
python binary and then calls configure.py with that.
As we already call configure with the desired python binary we should
call configure.py directly so that the expected python binary is used
and so that the shell wrapper doesn't throw spurious interpreter
validation errors.
This also avoid spurious errors due to the configure shell wrapper
missing supported python versions, for example this fixes:
Node.js configure: Found Python 3.11.0...
Please use python3.10 or python3.9 or python3.8 or python3.7 or python3.6.
/usr/bin/python3.10 ./configure
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f073cf7547)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 5.0.1 - 8/2/2022
- On very low speed transfers (<10Kbps) sessions would time out due to
a very large interpacket transmission interval. Fixed by putting a
lower limit on the advertised GRTT of of the interpacket transmission
interval.
- Sending of ABORT messages on early shutdown would sometimes fail due
to OpenSSL cleanup functions running before application cleanup.
Changed the ordering of atexit() handlers to ensure OpenSSL cleanup
happens last.
- Fixed missing timestamp update when clients read CONG_CTRL messages
- Fix to GRTT handling on server to ensure it doesn't fall below minumim.
- Fixed bypassed checking of existing files on client for backup
- Various logging fixes
https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 744607a5cb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with glibc 2.34, the gconv modules description has been split in
two:
- a common definition in the old location, /usr/lib/gconv/gconv-modules
- specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/
This is done so as to simplify the handling of glibc gconv modules, and
eventually to segregate those outside of glibc, and so that third-parties
may also provide their own gconv converters and their definitions.
And starting with that same glibc version, most of the gconv modules
definitions are moved to an extra configuration file in that
sub-directory.
It is thus no longer possible to use special code pages, like cp850,
which are very useful to access FAT-formatted devices.
Add support for this new gconv layout, while keeping support for older
glibc versions. Note that the modules themselves are not moved or
renamed, just the definition files have changed.
Instead of passing the one old gonv modules definitions file on stdin,
we pass the base directory to that file, and move into the script the
responsibility to find all the gconv definition files.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9d948e1b34)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When only a subset of the glibc gconv modules are installed, we need to
generate a trimmed-down list of available modules. We currently use gawk
for that.
However, we are not using any GNU extension in that awk script, and it
happens to work as expected when using mawk (which has no GNU
extension).
Commit 11c1076db9 (toolchain: add option to copy the gconv libraries)
did not explain why it used gawk explicitly, and given the age for that
commit, we doubt we'd be able to have the involved participants recall
anything from that period...
Besides, gawk is not a requirement for Buildroot.
Switch over to using plain awk.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 822cc1ebc4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
