During its configure step, libgpg-error needs awk:
configure -> src/gen-lock-obj.sh -> objdump + awk on test binary
This call is used on the output from objdump on a test binary to
retrieve the size of some data structure, and generate accordingly an
internal header (lock-obj-pub.native.h). However, libgpg-error buildroot
package does not depend explicitely on host-gawk: if host-gawk is not
part of the build, or if it is built later than libgpg-error,
libgpg-error autotool tooling will eventually pick the build machine
awk. On top of this issue, despite the configure.ac suggesting that it
supports different implementations of awk, libgpg-error configure step
will not parse correctly the output from objdump when using mawk,
leading to a wrong lock-obj-pub.native.h header being generated:
With gawk:
typedef struct
{
long _vers;
union {
volatile char _priv[24];
long _x_align;
long *_xp_align;
} u;
} gpgrt_lock_t;
#define GPGRT_LOCK_INITIALIZER {1,{{0,0,0,0,0,0,0,0, \
0,0,0,0,0,0,0,0, \
0,0,0,0,0,0,0,0}}}
With mawk:
typedef struct
{
long _vers;
union {
volatile char _priv[0];
long _x_align;
long *_xp_align;
} u;
} gpgrt_lock_t;
#define GPGRT_LOCK_INITIALIZER {1,{{}}}
This issue has been observed for example on Debian 13 with mawk
installed: it fails to parse mtx_size, leading to a size 0, and so
generating crashes at runtime because of the invalid size embedded in
libgpg-error.
Side note: the lock-obj-pub.native.h header file is correctly
generated, when using mawk 1.3.4 20200120 from Debian 12.
The described issue happen with mawk 1.3.4 20250131 from Debian 13.
libgpg-error should be fixed upstream to properly handle this data
structure size guessing even when using mawk, but anyway the
corresponding buildroot package should not randomly use the build
machine host tooling or buildroot-provided host tooling depending on
whether host-gawk has been selected and built before it.
Enforce an explicit dependency on host-gawk for libgpg-error to make
sure that it systematically uses the buildroot-provided awk.
Co-developped-by: Bernard Gautier <bernard.gautier@nav-timing.safrangroup.com>
Signed-off-by: Bernard Gautier <bernard.gautier@nav-timing.safrangroup.com>
Co-developped-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
[Julien: add the side note that mawk from debian 12 works]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 21bf78411e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commit 2774502344 bumped the
package from 4.2.2 to 6.2.3. Upstream added the usage of
std::scoped_lock in version 6.2.0:
a760b3278a
causing a build error detected by the Gitlab pipelines for the
bootlin-aarch64-glibc-old defconfig:
../src/inc/upnpapi.h:132:22: error:
‘scoped_lock’ is not a member of ‘std’
scoped_lock was introduced in gcc 7.1:
https://gcc.gnu.org/onlinedocs/libstdc++/manual/status.html#status.iso.2017
so we raise the minimum required gcc version accordingly.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5f543cfcda)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issues:
CVE-2026-39822: os: root escape via symlink plus trailing slash
go1.26.5 (released 2026-07-07) includes security fixes to the
crypto/tls and os packages, as well as bug fixes to the compiler,
the runtime, the go command, and the net, os, and syscall packages.
https://go.dev/doc/devel/release#go1.26.5
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 6e12744652)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
libcamera has moved for a while now to gitlab.freedesktop.org. The
mirror on git.linuxtv.org is still active, but it isn't the canonical
repository and has less bandwidth than freedesktop.org. Switch the
libcamera source URL to gitlab.freedesktop.org.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Julien: removed trailing slash in _SITE]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 138713f39a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://matt.ucc.asn.au/dropbear/CHANGES
- Security: server: Don't allow -B (accept blank password) with
-t (two factor auth). If run with -t and -B a user configured with a
blank password would be allowed to log in without pubkey auth.
23ec782856
Reported by nvidia
- Security: server: Fix parsing of long authorized_keys lines.
The remainder of a long line would be handled as the start of a new line.
In the case where external programs add semi-trusted public keys to
authorized_keys, a crafted key might bypass restrictions such as "command=".
8d8e1930b8
Reported by nvidia
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ce9ed75bbc)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The Debian 12 Bookworm snapshot we use, 20250203, uses the new deb822
format [0] for source list files; it carries a source list file that
points to the current repository, not to the snapshot.
Even though we do inject an old-style source list that points to the
snapshot repository, the packages in the current repository are more
recent than the one in the snapshot, so when we install our packages,
they get retrieved mostly from the current repository rather than from
the snapshot. The image is not reproducible.
Switch to using the new deb822-style source list file.
Note: we do not need to carry the "Latest just before" trick: the
snapshot repository will use the most recent actual snapshot before the
requested dated, so we can just use the date of the image we use (stuck
at midnight because we don't have better).
Since the snapshot repository can be really slow, while at the same time
the remote http server not dropping connections, it can take a very long
while to build the image; add a timeout so that stale connections are
detected and re-attemped early-ish (the timeout applies to both the
connect and the actual download, so it should be large enough to
accomodate slowish network connections).
Fixes: c95d5b8e1e (support/docker: move to current bookworm (Debian
12) snapshot)
[0] https://manpages.debian.org/trixie/apt/sources.list.5.en.html#DEB822-STYLE_FORMAT
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 3460675872)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://www.openssh.org/releasenotes.html#10.4p1
Changes since OpenSSH 10.3
==========================
This release contains a number of security fixes as well as general
bugfixes and a couple of new features.
Security
========
* sftp(1): when downloading files on the command-line using
"sftp host:/path .", a malicious server could cause the file to
be downloaded to an unexpected location. This issue was identified
by the Swival Security Scanner.
* scp(1): when copying files between two remote destinations, do
not allow a malicious server to write files to the parent
directory of the intended target directory. This issue was
identified by the Swival Security Scanner.
* sshd(8): when using the "internal-sftp" SFTP server implementation
(this is not the default), long command lines were previously
truncated silently after the 9th argument. If a security-relevant
option was in the 10th or later position, it would be discarded.
Reported by Steve Caffrey.
* sshd(8): add a documentation note to mention that the
GSSAPIStrictAcceptorCheck option is ineffective when the server
is joined to a Windows Active Directory. Reported by Yarin Aharoni
of Safebreach.
* sshd(8): DisableForwarding=yes didn't override PermitTunnel=yes
as it was documented to do. Note that PermitTunnel is not enabled
by default. Reported independently by Huzaifa Sidhpurwala of
Redhat and Marko Jevtic.
* sshd(8): avoid a potential pre-authentication denial of service
when GSSAPIAuthentication was enabled (this feature is off by
default). This was not mitigated by MaxAuthTries, but would be
penalised by PerSourcePenalties. This was reported by Manfred
Kaiser of the milCERT AT (Austrian Ministry of Defence).
* sshd(8): fix a number of cases where the minimum authentication
delay was not being enforced. Reported by the Orange Cyberdefense
Vulnerability Team.
* ssh(1): fix a possible client-side use-after-free if the server
changes its host key during a key reexchange. This was reported by
Zhenpeng (Leo) Lin of Depthfirst.
[...]
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 90add0c09e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Release notes:
https://webkitgtk.org/2026/06/02/webkitgtk2.52.4-released.html
Fixes the following security issues:
https://webkitgtk.org/security/WSA-2026-0003.html
Includes fixes (among others) for CVE-2026-28847, CVE-2026-28883,
CVE-2026-28901, CVE-2026-28902, CVE-2026-28903, CVE-2026-28904,
CVE-2026-28905, CVE-2026-28907, CVE-2026-28942, CVE-2026-28946,
CVE-2026-28947, CVE-2026-28953, CVE-2026-28955, CVE-2026-28958,
CVE-2026-43658, and CVE-2026-43660.
Also added 0001-REGRESSION-313606-main-Fails-to-build-with-system-ma.patch,
to get webkitgtk compiled when -DUSE_SYSTEM_MALLOC=ON is in use.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
[Julien: add "security" in commit log title]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 013612b496)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2025-64503:
cups-filters contains backends, filters, and other software required
to get the cups printing service working on operating systems other
than macos. In cups-filters prior to 1.28.18, by crafting a PDF file
with a large `MediaBox` value, an attacker can cause CUPS-Filter 1.x’s
`pdftoraster` tool to write beyond the bounds of an array. First, a
PDF with a large `MediaBox` width value causes `header.cupsWidth` to
become large. Next, the calculation of `bytesPerLine =
(header.cupsBitsPerPixel * header.cupsWidth + 7) / 8` overflows,
resulting in a small value. Then, `lineBuf` is allocated with the
small `bytesPerLine` size. Finally, `convertLineChunked` calls
`writePixel8`, which attempts to write to `lineBuf` outside of its
buffer size (out of bounds write). In libcupsfilters, the maintainers
found the same `bytesPerLine` multiplication without overflow check,
but the provided test case does not cause an overflow there, because
the values are different. Commit
50d94ca0f2fa6177613c97c59791bde568631865 contains a patch, which is
incorporated into cups-filters version 1.28.18.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2025-64503
- 50d94ca0f2
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit def2405f39)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2026-34933:
Avahi is a system which facilitates service discovery on a local
network via the mDNS/DNS-SD protocol suite. Prior to version 0.9-rc4,
any unprivileged local user can crash avahi-daemon by sending a single
D-Bus method call with conflicting publish flags. This issue has been
patched in version 0.9-rc4.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-34933
- 0be89b6bb5
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 88f3b8366b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://blog.clamav.net/2026/07/clamav-153-and-145-security-patch.html
Fixes CVE-2026-20213, CVE-2026-20214, CVE-2026-20215, CVE-2026-20216,
CVE-2026-20217, CVE-2026-20243 & CVE-2026-20244.
"Upgraded the Rust tar dependency to resolve the RUSTSEC-2026-0067 and
RUSTSEC-2026-0068 advisories, and upgraded the Rust openssl dependency
to resolve CVE-2026-41676."
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 31cd41c84b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Removed patch which is included in this bump.
Fixes CVE-2026-5435, CVE-2026-6238 & CVE-2026-6791.
git shortlog 4070d808bea1c077eb7e7d52b52b91cae98205d5..
Adhemerval Zanella (3):
math: Fix fma alignment when exponent difference is exactly 64 (BZ 34183)
arm: Save/restore VFP registers in PLT trampolines (BZ 34144, BZ 15792)
posix: Fix stack overflow in wordexp tilde expansion (BZ 34091, CVE-2026-6791)
Florian Weimer (8):
iconv: Suppress intermediate errors with //TRANSLIT (bug 34236)
resolv: Declare __p_class_syms, __p_type_syms for internal use
resolv: Fix ns_sprintrrf formatting of class, type values (bug 34289)
resolv: Improve formatting of unknown records in ns_sprintrrf
resolv: Check for inet_ntop failure in ns_sprintrrf
resolv: More types as unknown in ns_sprintrrf (CVE-2026-5435)
resolv: Fix buffer overreads in ns_sprintrrf (CVE-2026-6238)
resolv: Add test case tst-ns_sprintrr (bug 34033, bug 34069)
Jakub Jelinek (1):
Rename __unused fields to __glibc_reserved.
John David Anglin (1):
hppa: Fix missing call to __feraiseexcept (BZ 34306)
Pino Toscano (1):
Hurd: comment PF_LINK/AF_LINK defines
Sam James (1):
elf: don't clobber ld.so.conf in tst-glibc-hwcaps-prepend-cache [BZ #34210]
Samuel Thibault (3):
Hurd: comment PF_ROUTE/AF_ROUTE defines
Hurd: comment ioctls which cannot currently compile
Hurd: restore some SIOC ioctls
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 42d63edf4c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The 'mlkem.h' header is no longer present in wolfssl v5.9.2 [1] and the
content was merged in the 'wc_mlkem.h' header.
[1] 7a2cf5b655
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 275faf6d61)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Changes with nginx 1.30.3
*) Security: a heap memory buffer overflow might occur in a worker
process when using a configuration with "ignore_invalid_headers off;"
and "large_client_header_buffers" with large configured values when
proxying a specially crafted request to HTTP/2 or gRPC backend,
allowing an attacker to cause worker process memory corruption or
segmentation fault in a worker process (CVE-2026-42055).
Thanks to Mufeed VH of Winfunc Research.
*) Security: a heap memory buffer overread might occur in a worker
process while handling a specially sent response with decoding from
UTF-8 via the "charset_map" directive, allowing an attacker to cause
a limited disclosure of worker process memory or segmentation fault
in a worker process (CVE-2026-48142).
Thanks to Han Yan of Xiaomi and p4p3r of CYBERONE.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9b8c65a6c1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See here for a complete Changelog:
https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-22-current.html
Security Fixes:
GHSA-3g56-cgrh-95p5: chan_unistim DIALPAGE digit handling can overflow phone_number and crash Asterisk
GHSA-3rhj-hhw7-m6fw: NULL Pointer Dereference in HTTP AMI Digest Authentication
GHSA-4pgv-j3mr-3rcp: Reflected XSS in Phone Provisioning HTTP Error Pages
GHSA-589g-qgf8-m6mx: Stack buffer overflow in MWI NOTIFY Message-Account parsing
GHSA-746q-794h-cc7f: Out-of-Bounds Read in Q.931 Information Element Parser (H.323 Addon)
GHSA-8jhw-m2hg-vp3h: Heap Buffer Overflow in OGG/Speex File Playback (format_ogg_speex)
GHSA-8jw3-ccr9-xrmf: Buffer over-read in Asterisk PJSIP MWI body parser
GHSA-g8q2-p36q-94f6: Heap-use-after-free in Asterisk PJSIP TCP/SDP handling when TCP connection closes during SDP processing
GHSA-h5hv-jmgj-92q2: CVE-2022-37325 fix is absent from current chan_ooh323 Q.931 party-number parser
GHSA-j2mm-57pq-jh94: Possible RED T.140 Generation Accumulation OOB Write
GHSA-mxgm-8c6f-5p8f: Stack buffer overflow in res_xmpp XMPP namespace prefix handling
GHSA-ph27-3m5q-mj5m: SQL Injection in cel_pgsql and cel_tds via CELGenUserEvent eventtype Field
GHSA-q9fr-m7g8-6ph5: Asterisk app_sms.c copies externally controlled SMS lengths into fixed in-struct buffers
GHSA-qf8j-jp7h-c5hx: Out-of-Bounds Write in Codec2 Decoder Due to Floor/Ceil Sample Count Mismatch
GHSA-r6c2-hwc2-j4mp: LDAP Filter Injection in res_config_ldap via SIP Username (Unauthenticated Information Disclosure)
GHSA-vfhr-r9x9-c687: Possible RED T.140 Heap Buffer Overflow
GHSA-vrfp-mg3q-3959: ARI setChannelVar bypasses live_dangerously and permits FILE() writes
GHSA-wcvv-g26m-wx5c: ARI REST-over-WebSocket read-only bypass allows arbitrary module path load and conditional RCE
GHSA-x348-j6c9-77f3: Stack Buffer Overflow in H.323 ooTrace() via Unbounded vsprintf into Fixed 2048-byte Buffer
GHSA-xgj6-2gc5-5x9c: ast_loggrabber executes python script in world writable directory(/tmp) leading to potential privilege escalation And RCE
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7f48325de6)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
For more information on the release, see:
- https://mariadb.com/docs/release-notes/community-server/10.11/10.11.18
It fixes the following vulnerabilities:
- CVE-2026-48163:
MariaDB server is a community developed fork of MySQL server. From
versions 10.6.1 to before 10.6.27, 10.11.1 to before 10.11.18, 11.4.1
to before 11.4.12, 11.8.1 to before 11.8.8, and 12.3.1, during the SST
the donor node is interpolating parameters that the joiner sent into
the command line. Not all parameters were properly validated which
could allow a malicious joiner to execute arbitrary shell commands on
the donor side via the rsync SST method. This issue has been patched
in versions 10.6.27, 10.11.18, 11.4.12, 11.8.8, and 12.3.2.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-48163
- CVE-2026-48165:
MariaDB server is a community developed fork of MySQL server. From
versions 10.6.1 to before 10.6.27, 10.11.1 to before 10.11.18, 11.4.1
to before 11.4.12, 11.8.1 to before 11.8.8, and 12.3.1, a high-
privileged MariaDB user could've used wsrep_sst_receive_address or
wsrep_sst_donor global system variables to execute shell commands as
the uid of the mariadbd process on the galera joiner node. This issue
has been patched in versions 10.6.27, 10.11.18, 11.4.12, 11.8.8, and
12.3.2.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-48165
- CVE-2026-49261:
MariaDB server is a community developed fork of MySQL server. Versions
10.6.1 through 10.6.26, 10.11.1 through 10.11.17, 11.4.1 through
11.4.11, 11.8.1 through 11.8.7, and 12.3.1 with `wsrep_notify_cmd`
enabled would execute shell commands embedded in the name of the
joiner node. This is fixed in 10.6.27, 10.11.18, 11.4.12, 11.8.8, and
12.3.2. As a workaround, anyone who cannot upgrade now should disable
`wsrep_notify_cmd`.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-49261
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit c69f28ae5c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In the precedent patch "support/testing: test_gnupg2.py: use
assertRunNotOk()" [1] a small typo (OK instead of Ok) was introduced
in the test_gnupg2.py file, which caused a runtime failure.
This patch simply replace "self.assertRunNotOK(cmd)" with
"self.assertRunNotOk(cmd)" to correct this typo.
[1] cb791850ad
Signed-off-by: Dowan Gullient <dowan.gullient@smile.fr>
[Fiona: fix commit message formatting]
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit cfd7483a26)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-55200:
libssh2 through 1.11.1, fixed in commit 97acf3df contains an out-of-
bounds write vulnerability in ssh2_transport_read() that fails to
enforce upper bounds on packet_length field. Remote attackers can send
crafted SSH packets with excessively large packet_length values to
corrupt heap memory and achieve remote code execution.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-55200
- 97acf3dfda
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit c5aa932745)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
