Similar to dnsmasq, mrouted saves state data across reboots in the
/var/lib/misc/ directory. In the case of mrouted it is the unique
generation id (used by neighboring mrouted routers to identify any
router restarting). This file is generated on first boot.
Workaround only needed for systemd builds, the sysv skeleton already
has the /var/lib/misc/ directory.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream ChangeLog:
- Ignore IGMP proxy querys (src ip: 0.0.0.0), they must never win a
querier election
- Fix compat read location and new location for mrouted.genid
- Fix "non-decreasing" generation id, must increment on each restart
- Add support for configurable IGMP query response interval
- Add support for configurable IGMP querier timeout
- New 'join-group <group>' phyint option for cases where an IGMP
snooping switch blocks flooding of multicast to the port where
mrouted is connected
- On startup and reconf, log why we skip disabled interfaces
- Change to always log when assuming the IGMP querier role
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Similar to dnsmasq, ssdp-responder saves state data across reboots in
the /var/lib/misc/ directory. In the case of ssdp-responder it is the
(per-device unique) UUID that is generated on first boot.
Workaround only needed for systemd builds, the sysv skeleton already has
the /var/lib/misc/ directory.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream ChangeLog, summary:
- Add support for JSON output with 'ssdpd-scan -j'
- Dump received data from devices in 'ssdp-scan -l debug'
- Termios support for disabling '^C' output from 'ssdp-scan'
- Update copyright years, LICENSE file hash change
- Source '/etc/default/ssdpd' from systemd unit file
- Add fallback if '/var/lib/misc' is missing on system
- Fix truncated UUID when reading from cache file
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch to enable build without c++.
Add configure option to fix subsequent configure error due to patched
source file during git version check:
CMake Error at cmake/GitVersion.cmake:118 (message):
Unable to find current project version !
Call Stack (most recent call first):
CMakeLists.txt:100 (GetGitVersion)
Fixes:
http://autobuild.buildroot.net/results/2f8/2f819871a89cb2a2df239b1f879c1babcdd022fc/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
objtool built by the kernel requires libelf
ldd TestSELinuxSystemdExt4/build/linux-6.1.26/tools/objtool/objtool
linux-vdso.so.1
libelf.so.1 => TestSELinuxSystemdExt4/host/lib/libelf.so.1
While updating the kernel used in TestSELinuxSystemd [1] we
forgot to select BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to provide
Buildroot's host-libelf. Using host-libelf avoid linking with
libelf installed on the host or failing to build objtool if
libelf is not installed.
[1] 60b84fb7ce
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4725186370 (TestSELinuxSystemdSquashfs)
https://gitlab.com/buildroot.org/buildroot/-/jobs/4725186368 (TestSELinuxSystemdExt4)
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The bind package exhibits gcc bug 101737 when built for the SH4
architecture with optimization enabled, which causes a build failure.
As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101737=y.
To achieve this we need to correct the override of CFLAGS by using:
BIND_CONF_OPTS += CFLAGS="$(BIND_CFLAGS)"
instead of:
BIND_CONF_ENV = BUILD_CFLAGS"$(BIND_CFLAGS)"
since the latter doesn't work as expected and doesn't override CFLAGS.
Fixes:
http://autobuild.buildroot.net/results/e7b/e7b9a4cbee8bb16431609182b96d1ac1ccec10e7/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The rtl8821cu repository comes with a 8821cu.conf file intended to be installed
in /etc/modprobe.d - the configuration file enables some driver features.
Install the /etc/modprobe.d/8821cu.conf file to the target.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The docker-run script attempts to support git-new-workdirs and
git-worktrees by resolving the symlink at '$GIT_DIR/config' to get the
true $GIT_DIR. However this does not work for git-worktrees as they do
not use symlinks, instead they change the $GIT_DIR into a regular file
that contains the path to the real $GIT_DIR. To complicate things
further, we actually want the $GIT_COMMON_DIR which is the superset of a
worktree's $GIT_DIR.
git-rev-parse supports the '--git-common-dir' which will resolve the
$GIT_COMMON_DIR for us. However it does not work for git-new-workdirs,
so we still need to detect and handle them.
'--git-common-dir' also appeared only with git 2.10.0, released in 2016,
so it will not be available in older "enterprise-grade" distributions.
In that case, 'git rev-parse --git-common-dir' would return the option
flag '--git-common-dir' as-is, which is incorrect. So, we instruct it to
never return flags.
'--git-common-dir' also returns just '.git' for the main working copy,
but 'docker run' want an absolute path, so we canonicalise it.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- support git versions before --git-common-dir was introduced
- don't mount GIT_DIR if unknown (i.e. not needed)
- fix expanding MAIN_DIR
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 247ef2a fio has optional libiscsi engine support
This patch enables fio iscsi support if BR2_PACKAGE_LIBISCSI
was selected, which also requires pkg-config as it is used by the
configure script to detect libiscsi.
There is no --disable-libscsi option in the configure script: if
--enable-libiscsi is not passed, it doesn't even try to detect/use
libiscsi.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog 1.09 -> 1.10:
ef1034d Tag version 1.10
c596390 Controlling TTY code fix.
32b7553 Help message problems
c89cee9 Convert repository from SVN to git
934f87f Sig unsafe functions in signal handler
ed856e6 Better "-e" handling.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
