This package is no longer maintained in Buildroot: no maintainer in
DEVELOPERS file, and doesn't build since we bumped mbedtls to version
3.x in commit 3481a9643f, which first
appeared in 2025.05.
Also, upstream linphone has changed their strategy, and now their
specific dependencies (bctoolbox, belle-sip, etc.) are bundled in
linphone, so anyway the packaging needs to be adapted significantly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 90e4e80fc3)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
There are a number of kernel config fixups required for tailscale to
function properly, these are commonly enabled by default in various
kernel configs but lets make sure they are all enabled here as well.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 766f6ddb7e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The commit [1] set the default value of '<pkg>_CPE_ID_UPDATE' to not use
a wildcard by default. But instead of setting the value to '-' it set it
to an empty value instead.
According to document [2] section 6.1.2.1.1 the 'Not Attributed' value
bind to an hyphen ('-') and the blank statement bind to the 'Any' ('*').
Because the CPE matching function was incorrect using a blank statement
worked to remove the false positives but this is not correct according
to the CPE documentation.
[1] 53a8616460 package/pkg-generic.mk: use more sensible default value for <pkg>_CPE_ID_UPDATE
[2] https://nvlpubs.nist.gov/nistpubs/Legacy/IR/nistir7695.pdf
Fixes: 53a8616460.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8430ca7c28)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Setting the "update" field in the CPE ID to * doesn't actually make
much sense, as * is a wildcard. Instead, this field should really
reflect the "subrelease" / "update" of the package, which unless
specified explicitly by the package .mk file, is empty.
Using a wildcard causes a few CVEs to be incorrectly identified as
affecting some of our packages.
For example https://nvd.nist.gov/vuln/detail/CVE-2013-1428 has a
CPE configuration that goes like this:
cpe:2.3:a:tinc-vpn:tinc:*:pre6:*:*:*:*:*:* up to including 1.1
and this CPE configuration is currently identified as affecting our
package. This isn't correct as our package is using 1.0.36, not a
"pre6" version. But because the CPE ID generated by Buildroot uses *
as the "update" field, and * is the wildcard, it does match with this
CPE configuration.
After this change, two CVEs are no longer identified as affecting
Buildroot packages:
https://nvd.nist.gov/vuln/detail/CVE-2013-1428https://nvd.nist.gov/vuln/detail/CVE-2017-9454
and in both cases they are indeed CVEs not affecting our package.
Reported-by: Titouan Christophe <titouan.christophe@mind.be>
Cc: Titouan Christophe <titouan.christophe@mind.be>
Cc: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 53a8616460)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Given the following criteria: `cpe:2.3:a:oneidentitty:syslog-ng:*:*:*:*:-:*:*:*`.
The former `cpe_matches` implementation would match with the following
CPE: `cpe:2.3:a:oneidentitty:syslog-ng:4.71:*:*:*:premium:*:*:*`.
The 'hyphen' ('-') meaning is "Not Attributed" (NA) a criteria with no
attributed software edition shouldn't match with a CPE with an attributed
software edition:
https://csrc.nist.gov/pubs/ir/7695/final
This patch also create a distinct 'CPE' object that aggregate the
function specifics to CPEs like it's done for 'CVE'.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 35f376d88e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The `support/script/cve.py` file is used as a library. Depending on how
you use this library you might not want to write content to stdout when
calling its function.
This patch move the 'updating' log to the 'pkg-stats' script and write
the alert when LooseVersion doesn't have a version to stderr.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4b318dea17)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commit e4749b826c disabled
parallel builds back in 2016. Nearly 10 years and a "Complete rewrite
[of] the BIND 9 build system" later
978c7b2e89
we enable parallel builds again, make -j1000 finished without problems.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 6a20a930fd)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commits 7b43e24818 and
8adeaec8af removed the possibility for
static builds but forgot to remove some related _CONF_OPTS.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 636b2a8503)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
When run_cmd_on_host() runs a command that fails, we only get an
exception with no details to debug what happened. Let's improve that
by catching the exception, and printing the command output. This
requires redirecting stderr to stdout (instead of /dev/null) and
asking to get the output in text format.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 01dc13adfb)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
For more details on the version bump, see:
- https://github.com/ImageMagick/ImageMagick/compare/7.1.2-3...7.1.2-8
Fixes the following vulnerability:
- CVE-2025-62171
ImageMagick is an open source software suite for displaying,
converting, and editing raster image files. In ImageMagick versions
prior to 7.1.2-7 and 6.9.13-32, an integer overflow vulnerability
exists in the BMP decoder on 32-bit systems. The vulnerability
occurs in coders/bmp.c when calculating the extent value by
multiplying image columns by bits per pixel. On 32-bit systems with
size_t of 4 bytes, a malicious BMP file with specific dimensions can
cause this multiplication to overflow and wrap to zero. The overflow
check added to address CVE-2025-57803 is placed after the overflow
occurs, making it ineffective. A specially crafted 58-byte BMP file
with width set to 536,870,912 and 32 bits per pixel can trigger this
overflow, causing the bytes_per_line calculation to become zero.
This vulnerability only affects 32-bit builds of ImageMagick where
default resource limits for width, height, and area have been
manually increased beyond their defaults. 64-bit systems with size_t
of 8 bytes are not vulnerable, and systems using default ImageMagick
resource limits are not vulnerable. The vulnerability is fixed in
versions 7.1.2-7 and 6.9.13-32.
For more information, see:
- https://nvd.nist.gov/vuln/detail/CVE-2025-62171
- https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-9pp9-cfwx-54rm
- cea1693e2d
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3b3b2d1b72)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See https://jvn.jp/en/jp/JVN19358384/
This fixes the following vulnerability:
- CVE-2025-24912:
hostapd fails to process crafted RADIUS packets properly. When hostapd
authenticates wi-fi devices with RADIUS authentication, an attacker in
the position between the hostapd and the RADIUS server may inject
crafted RADIUS packets and force RADIUS authentications to fail.
https://www.cve.org/CVERecord?id=CVE-2025-24912
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 8282aaf094)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
iozone releases 3.507 and 3.508 seems to be only build fixes releases
for latest GCC compiler version but since there is no public vcs
it's not easy to review the history between releases and backport
any patches.
Based on the changelog from [1]:
Revision 3.507
Fix GCC compile warnings.
Revision 3.508
Put an end to the (&*% stupid GCC breaking builds for no valid reason.
So bump to the latest 508 release.
Rebase 0001-Add-new-targets-for-iozone.patch
Rebase 0002-fix-build-without-aio.patch and convert to git format
The TestIozone build issue is not yet fixed by the version bump [2].
[1] https://www.iozone.org/src/current/Changes.txt
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/11176774405
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 70cefcac9e)
[thomas: this with the next patch actually fixes build issue with GCC14 and not only GCC15]
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In commit [1] the package netsnmp was bumped on master to version 5.9.4.
This version included fixes for CVE that were already patched in
buildroot and thus was not picked on the LTS branch.
As a consequence, the commit [2] was made on master which removed the
stale 'IGNORE_CVES' for the patches no longer presents. This commit was
wrongly picked on the LTS branch.
This reverts commit [3] which was included in 2025.02.x to set the
'IGNORE_CVES' back to the state of version 5.9.3.
[1] 1799cfebfd package/netsnmp: bump to version 5.9.4
[2] 4a3eab8341 package/netsnmp: drop stale ignore CVE entries
[3] 3ef8c1d0db package/netsnmp: drop stale ignore CVE entries
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
In commit [1], the only 'engicam' board config present on the 2025.02.x
branch was removed.
On the master branch the 'px30core' board is present because it was
added in commit [2] not picked on LTS branch.
So the DEVELOPERS entry for Jagan Teki that match every 'engicam' board
was not removed.
This patch removes this entry to remove the post commit hook warning.
[1] 13eb6c293e configs/engicam_imx6*: remove defconfigs, broken
[2] 6e6bd098c3 configs/engicam_px30_core_defconfig: new defconfig
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
The commit adds a backported upstream patch to fix the following build
failure:
ptp2/ptp-pack.c:3168:31: note: earlier argument should specify number of elements, later size of each element
ptp2/chdk.c: In function 'yuv_live_to_jpeg':
ptp2/chdk.c:1203:41: error: passing argument 3 of 'jpeg_mem_dest' from incompatible pointer type [-Wincompatible-pointer-types]
1203 | jpeg_mem_dest (&cinfo, &outbuf, &outlen);
| ^~~~~~~
| |
| uint64_t * {aka long long unsigned int *}
In file included from ptp2/chdk.c:31:
/home/autobuild/autobuild/instance-0/output-1/per-package/libgphoto2/host/armeb-buildroot-linux-gnueabi/sysroot/usr/include/jpeglib.h:989:43: note: expected 'long unsigned int *' but argument is of type 'uint64_t *' {aka 'long long unsigned int *'}
989 | unsigned long *outsize);
Fixes:
- https://autobuild.buildroot.org/results/db742e301a401c9f4bdf3c7e8cfde9f0ba1c4558
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ebd07998d0)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
