Fixes the following security issue:
CVE-2018-16850: SQL injection in pg_upgrade and pg_dump, via CREATE TRIGGER
... REFERENCING
For more details, see the advisory:
https://www.postgresql.org/about/news/1905/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://webkitgtk.org/2018/10/29/webkitgtk2.22.3-released.html
Patch "0001-ARM-Building-FELightingNEON.cpp-fails-due-to-missing.patch"
is removed because it is included in the new release.
This is a maintenance release which further improves playback of video
when using media source extensions (MSE), specially for WebM content,
and provides a few correctness fixes.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0def20865d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NetworkManager includes some parts of the systemd-networkd code in its
codebase. That can be found at src/systemd/src/libsystemd-networkd.
The DHCP implementation provided by systemd-networkd is used when
NetworkManager is configured to use the internal implementation,
however the default is to use dhclient.
When NetworkManager is configured to use the internal dhcp and an
interface is setup with ipv6.method=auto (which is the default value)
or ipv6.method=dhcp, this flaw can be exploited. When using
ipv6.method=auto, the DHCPv6 client can be automatically started with a
Router Advertisement packet.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0a51ba655c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "development" defconfigs for Atmel platforms enable both OpenSSH
and Dropbear, which doesn't make a lot of sense, as only one SSH
server can start on port 22.
This commit therefore drops BR2_PACKAGE_DROPBEAR=y from those
defconfigs, keeping OpenSSH as an SSH server/client, as was requested
by Atmel/Microchip folks in the review of an earlier version of this
patch [1]. Since those defconfigs are "development" defconfigs, they
are not meant to be minimal, and already provide an arbitrary set of
packages, so using openssh is just as good as using dropbear in this
case.
[1] https://patchwork.ozlabs.org/patch/989516/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dab1539613)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd-networkd is vulnerable to an out out-of-bounds heap write in the
DHCPv6 client when handling options sent by network adjacent DHCP servers.
A attacker could exploit this via malicious DHCP server to corrupt heap
memory on client machines, resulting in a denial of service or potential
code execution.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Peter: add description]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bc6ecbbeef)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1.4.50:
[mod_alias] security: potential path traversal with specific configs
[core] security: use-after-free invalid Range req
[mod_alias] security: path traversal in mod_alias (in some use cases) (fixes#2898)
[core] security: use-after-free after invalid Range request (fixes#2899)
1.4.51:
[core,security] process headers after combining folded headers
[mod_userdir] security: skip username “.” and “..”
1.4.51 brings optional pam and wolfssl support. Explicitly disable these
options for now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 15793bc19f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some ZynqMP device trees in the kernel have a dot in their name,
for example "zynqmp-zcu102-rev1.0". The post image script
left out the part after the dot and created an invalid symlink.
Signed-off-by: Francois Beerten <fbeerten.git@colabti.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4f56655b2b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 916b21a7fb ("package/tar:
Depends on MMU"), BR2_PACKAGE_TAR depends on BR2_USE_MMU. However, the
Config.in comment does not take into account this dependency, an
inconsistency which is fixed by this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2a3ef05520)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new version, among other changes, includes important fixes
for unaligned memory access on ARM (both for 32 and 64-bit), as well
as performance improvements and build fixes.
Patch "0001-Tell-CMake-to-not-check-for-a-C-compiler.patch" is not
needed due to the issue being fixed upstream, and therefore is removed.
Patch "0001-CMake-Allow-using-BUILD_SHARED_LIBS-to-choose-static.patch"
is rebased against the latest upstream changes.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit be733b54a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the runtime tests were first introduced, they still ran pretty
quickly. Nowadays, however, there are a lot of runtime tests, and some
of them take a really long time. So running them on every push is
really too much.
Just like we do for the defconfigs, run them on explicit trigger only.
The explicit trigger is now done every week, but it can be increased
to e.g. twice or three times per week.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 96123c1c4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we do a release, we know only of a set of gcc versions that the
host may have. But in the future, distributions with newer gcc versions
may show up.
Currently, we do not recognise those versions, and thus we do as if they
were older than the oldest we know of. This means that a set of packages
become unselectable, when they should be.
We fix that by capping the detected version to the highest we know of.
Reported-by: gargar_ on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3950e69dad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt KMS support should not explicitly depend on the availability of opengl.
Don't explicitly disable KMS if opengl is not available and fallback to
detecting if libdrm is available before disabling kms.
The scenario where this is necessary involves using the Qt linuxfb backend
"dumb buffer" support via the DRM API. This is new in Qt 5.9 [1] and only
requires KMS, but not opengl. Although on Qt 5.6, only eglfs actually
uses libdrm/kms, it doesn't hurt to add the dependency and the -kms
option there as well, and doing so keeps the logic in the .mk file
simple.
[1] http://doc.qt.io/qt-5/embedded-linux.html#linuxfb
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f91ea94a6f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The utils/diffconfig script works only on variables with the BR2_
prefix. This is OK for Buildroot [def]configs since this is the prefix
for all user-facing variables, but it prevents using the same script
to compare configs from kconfig-based packages.
Remove the BR2_ restriction, allowing usage such as:
./utils/diffconfig \
board/qemu/xtensa-lx60/linux.config \
board/qemu/xtensa-lx60/linux-nommu.config
Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf9ccfc37b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libcilkrts configure script errors out with "Pthreads are required
to build libcilkrts" if the C library doesn't have thread support. To
fix that, we disable libcilkrts when thread support is not available.
This issue was not noticed until now, because we only regularly build
a no-thread toolchain for ARM, and libcilkrts was enabled on ARM only
starting in gcc 7.x.
This fixes the build of no-thread toolchains on architectures where
libcilkrts is supported, i.e x86/x86-64, ARM and Sparc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 076fd27da7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sort the certificates into alphabetical order so the contents of
ca-certificates.crt can be built reproducibly.
Note: The certificates are sorted uppercase then lowercase filenames
so the contents of ca-certificates.crt matches the source debian package.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c61b49e5b5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rebuilding ca-certificates using make ca-certificates-rebuild
caused duplicate certificates to be installed in the target. Its build
system is broken: it doesn't detect that the output file already exists,
and instead of overwriting it, a duplicate is generated under a
different name. The net effect is that all certificates are installed
twice after rebuild.
Fix this by cleaning the build directory before building the package.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 42b10634c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
c_rehash looks at all files in /etc/ssl/certs, generates the hash for
the certificates in them, and makes a symlink from the hash to the
certificate file.
However, ca-certificates.crt is also installed in /etc/ssl/certs and
it contains all the certificates. c_rehash will take one of them (the
first?) and create a symlink from that hash to ca-certificates.crt.
Usually, this results in an error like:
WARNING: Skipping duplicate certificate ca-certificates.crt
and all is well. However, depending on filesystem order,
ca-certificates.crt may come first, and the actual certificate is
not symlinked.
To fix this install certificates.crt to /etc/ssl/certs *after* we run
c_rehash to prevent it getting hashed by mistake.
Note: $(TARGET_DIR)/etc/ssl/certs/ is already removed during install so
this fix also works for rebuilds.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d07ddd8e4e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc does not build when the srcdir path contains a '@', because that
path is then substitued in a texi file as argument to an @include
directive. But then, the '@' in the path will start a command evaluation
of its own, thus breaking the build. For example, with a $(O) path set
to /home/ymorin/dev/buildroot/O/to@ti :
perl ../../gcc/../contrib/texi2pod.pl ../../gcc/doc/invoke.texi > gcc.pod
../../gcc/doc/invoke.texi:1678: unknown command `ti'
../../gcc/doc/invoke.texi:1678: @include: could not find /home/ymorin/dev/buildroot/O/to/build/host-gcc-initial-7.3.0/build/gcc/../../gcc/../libiberty/at-file.texi
[Peter: use findstring instead of subst/compare]
Reported-by: c32 on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7007dc2bc9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-10873: A vulnerability was discovered in SPICE before version
0.14.1 where the generated code used for demarshalling messages lacked
sufficient bounds checks. A malicious client or server, after
authentication, could send specially crafted messages to its peer which
would result in a crash or, potentially, other impacts.
Drop patches as they are now upstream.
Add host-pkgconf as the configure script uses pkg-config. Drop removed
--disable-automated-tests configure flag.
Add optional opus support, as that is now supported and needs to be
explicitly disabled to not use. Explicitly disable optional gstreamer
support for now as the dependency tree is fairly complicated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f33f7a4f64)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when a custom user table and a package define the same user,
the settings from the package takes precedence over the ones from the
custom user table.
However, it makes sense to allow the settings from the custom user table
take precedence. For example, it would allow redirecting the user's
home directory to an alternate location (e.g. away from tmp and into a
partition that is persistent).
The support/scripts/mkusers script will only retain settings from the
latest definition it finds.
Thus, by passing the custom user table after the package defined users,
it is possible to override the package provided user definitions.
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c3edec0018)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license heading in source files includes the "or any later"
language.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit cfa3447a78)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-14501: An out-of-bounds read flaw exists in
parse_file_info in archive_read_support_format_iso9660.c in libarchive
3.3.2 when extracting a specially crafted iso9660 iso file, related to
archive_read_format_iso9660_read_header.
Drop upstream patches.
Use upstream provided tarball hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 946f136fe1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot has a copy of dtc in-tree. However, it has a bug in its build
system which could result in both one of the in-tree dtc include files
and the same host-installed include file to be #included.
Normally, that wouldn't be a problem, because (a) the two include files
are compatible, so it doesn't matter which one you include, and (b) the
include guards are the same in both, so only one of them really does
get included. However, upstream dtc has changed the include guards,
removing the leading underscore. Therefore, now the header file does
get included twice, which leads to multiple definitions like:
/builds/buildroot.org/buildroot/output/host/include/libfdt.h:1790:19: error: redefinition of 'fdt_appendprop_cell'
static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
^~~~~~~~~~~~~~~~~~~
In file included from tools/fdt_host.h:11:0,
from tools/imagetool.h:24,
from tools/atmelimage.c:8:
tools/../include/libfdt.h:1656:19: note: previous definition of 'fdt_appendprop_cell' was here
static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
^~~~~~~~~~~~~~~~~~~
To fix this, patch (host) dtc to accept the old include guard as well,
which restores the old behaviour. This patch is probably not
upstreamable, since it's really a hack to work around an issue in
U-Boot. Note that it has been fixed upstream, but Buildroot supports
building older versions of U-Boot as well.
Note that the problem may still occur if you have libdtc-dev installed
on the host. However, now there is a simple workaround: enable
BR2_TARGET_UBOOT_NEEDS_DTC.
Note that a similar problem also occurs with the beaglebone fork of the
kernel. It's not clear if it has been fixed there.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Arnout: rewrite commit message, rewrap patch commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c7ffd8a75d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
