The elfutils programs require Glibc to be used as the C library. Show a
comment when this libc isn't used in the toolchain.
Suggested-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 52ba3ed657)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
For release note, see:
https://dev.gnupg.org/T7166
This version fixes a build error which can happen with 32-bit arm
configurations.
The issue can be reproduced with commands:
cat >.config <<EOF
BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_LIBGCRYPT=y
EOF
make olddefconfig
make libgcrypt
Build is failing with output:
ec-nist.c: In function '_gcry_mpi_ec_nist256_mod':
ec-inline.h:902:5: error: 'asm' operand has impossible constraints or there are not enough registers
902 | __asm__ ("subs %3, %7, %10\n" \
| ^~~~~~~
Details for this buggix: https://dev.gnupg.org/T7226
Signed-off-by: Bram Oosterhuis <dev@bybram.com>
[Julien: reword commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 89ca1bd4f4)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
syslinux is... special. It is a target package, but it is installed in
HOST_DIR *in the target install commands*: in addition to the boot files
that run on the target, syslinux installs a set of host tools that are
to be used at build time (e.g. extlinux, to prepare bootable media, like
an iso96660 image). Then, from HOST_DIR, the actual boot files are
copied into BINARIES_DIR (i.e. images/); we do it that way because the
boot files are scattered about everywhere in the build tree, while they
are all packed together in a single directory once installed.
However, there is no dependency between the target and image install
steps. So, when using top-level parallel builds, there is no guarantee
that the target install commands are finished before the image install
commands are started.
We fix that by first installing into a temporary location, as part of
the build step, and by then copying from there as part of the install
step. This ensures that the boot files are easily available, without
needing a dependency on the target install step, that we can't express.
Note that we do not change the actual installation into HOST_DIR: it can
be set up differently that our temporary location, and we do not want
to duplicate that setup here (it's going to diverge over time).
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 90e76818a1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
At the moment, package stats indicates that libmpeg2 is affected by
https://nvd.nist.gov/vuln/detail/CVE-2022-37416
However, this CVE applies to a completely different piece of software,
that has the same name "libmpeg2" [1].
To avoid the confusion, let's add a proper CPE vendor to Buildroot's libmpeg2.
The library itself does not clearly identify any vendor name, and there isn't
any existing CPE on the NVD website. Since this library is not updated for
many years (maybe even before the introduction of the CPE system), but the
code is somehow related to the Videolan project, let's add this as the
vendor, which sould solve the matched CVE issue.
[1] https://github.com/ittiam-systems/libmpeg2
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
[Julien: fix typo in commit title]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 585ee147dd)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
When a new gcc version is introduced, for example gcc 15 in
commit [1], it should have also added a "depends on
!BR2_ARCH_NEEDS_GCC_AT_LEAST_15" to the previous gcc version.
This logic is described for external toolchains in commit [2],
for example. The internal Buildroot toolchains should have the
same logic. This logic existed for previous gcc version. See for
example the removal of gcc 12 in commit [3].
There is usually no problem, because all the three latest active gcc
versions supports all CPUs present in Buildroot.
However, the commit [4] recently added the support for the Arm
Cortex-A720 CPU, which needs at least gcc 14. Since there is no
logic preventing the selection of the gcc version, it is possible
to select an unsupported gcc version (i.e. gcc 13).
In such a case, the host-gcc-initial package configuration fails
with output:
Unknown cpu used in --with-cpu=cortex-a720
This commit fixes the issue by adding those missing dependencies.
Fixes:
https://autobuild.buildroot.org/results/918b90aee0b65f01efc241622015cb847b4e23a8/
[1] 75891397ab
[2] f577d8218f
[3] 58cf7c51da (66f7e875db173e5538d3511c8297acc1ba30da33_27_25)
[4] de374e06d8
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6f231d3003)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The new test requires a br2-external directory because we compile a
small test program on the host and install it on the target, but it's
not useful to have it in the main Buildroot package tree.
The test program loads and parses a sample HTML document. Taking
inspiration from 'examples/get_title.c' in gumbo-parser, it also
searches for the title of the document just to check that we can do
more than the parsing.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit da23be6338)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Development on Google's GitHub repository has stopped a long time ago.
A fork exists on Codeberg, and multiple distributions (Fedora, Arch
Linux, ...) are already using it (see [1]).
Update the source URL to use the new upstream location.
The new upstream has a different hash for the 0.10.1 tarball, so
update it as well.
[1]: https://repology.org/project/gumbo-parser/versions
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 1e106d8412)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This test verifies that we can run nginx with the modsecurity
directives.
It also checks a very simple rule that blocks requests containing the
keyword "blockme".
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
[Julien:
- add / at directory end in DEVELOPERS
- sort DEVELOPERS entries alphabetically
- remove unneeded test configs already present in
BASIC_TOOLCHAIN_CONFIG
- sort test config directives alphabetically
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5cda85cb56)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Backport the upstream patch that fixes the following build error when
compiling for mips with gcc 15:
In file included from mips-opc.c:29:
mips-opc.c: In function 'decode_mips_operand':
mips-formats.h:86:7: error: expected identifier or '(' before
'static_assert'
86 | static_assert[(1 << (SIZE)) == ARRAY_SIZE (MAP)]; \
| ^~~~~~~~~~~~~
The patch is already part of upstream binutils 2.44, so we only need
it for 2.42 and 2.43.1.
All 3 versions we have of host-binutils were build-tested using the
defconfig from the autobuilder failure (see the link below) and gcc 15
on the host.
Fixes:
- https://autobuild.buildroot.org/results/873/873ec25cf01d5f2b9ae7044e0b1d8d8791b781e6/
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 430aa91c3d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The upstream Github repository payden/libwebsock is no longer available,
and its URL now redirects to some completely unrelated software.
We don't know for sure what happened, but at least the package does not
build anymore, because its source code has vanished.
Since no other buildroot package depends on libwebsock, and it hasn't
received any update; let's simply remove it from here.
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9f2dbf1486)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following CVE:
- CVE-2025-29481:
Buffer Overflow vulnerability in libbpf 1.5.0 allows a local attacker to
execute arbitrary code via the bpf_object__init_prog` function of libbpf.
Fixes:
https://www.cve.org/CVERecord?id=CVE-2025-29481
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
[Julien: add direct link to CVE in commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit fba60c7732)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Actually DTB_LIST accepts only file and not files with relative path
preprended. This leads to have vfat without .dtb files and so Linux
doesn't start. Let's fix this by including slash in sed command as done
for mxc as well as basename in front of $dt.dtb to remove possible
useless folders present in the dts path. Let's also add set -e at the
top of the script to make it more verbose on error and modify this
section according to spellcheck as done for mxc.
This commit align this "mxs/post-image.sh" with its "imx/post-image.sh"
counterpart which was improved for arm64 in commit [1].
[1] 4755bf2bd4
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Julien:
- change space indentation to tabs for consistency
- add note in commit log about imx/post-image.sh
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 50297207a8)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
gnu-efi fails to build if TOPDIR is exported in the environment since the
move to version 3.0.18 in commit 9efeb7e914 ("package/gnu-efi: bump to
version 3.0.18").
The reason is the change in TOPDIR logic introduced by upstream commit
31913f8489 ("Make: make TOPDIR actually work and get rid of unused CDIR"):
31913f8489
export TOPDIR=foo; make gnu-efi
...
/path/to/buildroot/output-gnuefi/host/bin/aarch64-linux-ld: cannot find
/path/to/buildroot/output-gnuefi/build/gnu-efi-4.0.0//apps/../aarch64/gnuefi/crt0-efi-aarch64.o:
No such file or director
make[2]: *** [Makefile:89: apps] Error 2
make[1]: *** [package/pkg-generic.mk:273: /path/to/buildroot/output-gnuefi/build/gnu-efi-4.0.0/.stamp_built] Error 2
make: *** [Makefile:23: _all] Error 2
As a workaround, unexport TOPDIR like we do for other sensitive environment
variables.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 2b5544ab7a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The list of environment variables to unexport has grown organically over the
years and is no longer sorted. Sort it alphabetically for clarity.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit da04cfa26c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The current homepage URL leads to an HTTP 404 error.
Fix it by using the homepage URL currently mentioned in mupdf's git
repository.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit d1ea9a64e6)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Bump from v5.15.1 to the latest LTS, v5.15.186.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Joachim Wiberg <troglobit@gmail.com>
[Julien: reword commit title]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3953bd3e9c)
[thomas: bump to v5.15.186 instead]
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit 0fce7a9623 ("package/libcurl: fix build w/ threads + c-ares") added a
conditional for threads + c-ares, but ended up with a end-parenthesis too
many - so the condition is never true. Fix that.
Reported-by: Tibault Damman <tibault.damman@basalte.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 17399baa7c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In Linux v6.8, the rtla Makefile was rewritten :
01474dc706ca ("tools/rtla: Use tools/build makefiles to build rtla")
The new Makefile uses default linker values, so the host linker being used to
produce the final rtla binary.
This results in the following error :
ld: [...] trace.o: error adding symbols: file in wrong format
Add LD=$(TARGET_LD) to the RTLA_MAKE_OPTS to fix rtla cross-compilation.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit f28f34e200)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
According to
https://lists.samba.org/archive/samba-technical/2025-June/139484.html:
A new update, version 7.4, of cifs-utils has been released today.
Users of cifs-utils version 7.3 on older kernels are encouraged to
update to 7.4 since it includes a fix for a mount problem with version
7.3 of cifs-utils on older kernels when using namespaces.
[...]
Detailed list of changes since version 7.3 was released
----------------------------------------------------------------
Enzo Matsumiya (1):
mount.cifs: retry mount on -EINPROGRESS
Henrique Carvalho (1):
cifs.upcall: correctly treat UPTARGET_UNSPECIFIED as UPTARGET_APP
Paulo Alcantara (1):
cifs.upcall: fix memory leaks in check_service_ticket_exits()
Pavel Shilovsky (1):
cifs-utils: bump version to 7.4
Z. Liu (2):
getcifsacl, setcifsacl: use <libgen.h> for basename
cifscreds: use <libgen.h> for basename
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 4abd7bb9df)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commit 8f69974c20 switched the
buildsystem of mpv from waf to meson but forgot to remove a patch which
fixed a waf-related build error.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 942b88e693)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See changelog:
https://github.com/KhronosGroup/glslang/blob/15.3.0/CHANGES.md
Fixes build issue: error: ‘uint32_t’ has not been declared, encountered
on GCC v15, caused by cstdint not being implicitly included.
https://bugs.gentoo.org/937261
This commit also adds host-spriv-tools in _DEPENDENCIES to use the
version packaged in Buildroot. It also adds
ALLOW_EXTERNAL_SPIRV_TOOLS=ON in _CONF_OPTS, which was added in upstream
commit [1], introduced in version 13.0.0.
Also, when trying to build this python-glslang version 15.3.0 on a host
providing cmake < 3.26, the configuration fails with the error message:
CMake Error at CMakeLists.txt:345 (add_test):
Error evaluating generator expression:
$<TARGET_RUNTIME_DLL_DIRS:spirv-remap>
Expression did not evaluate to a known generator expression
This happens in the Buildroot docker reference image, which provides a
cmake version 3.25. To workaround this issue which happen in glslang
testing code, this commit disable those tests by adding
GLSLANG_TESTS=OFF in _CONF_OPTS.
[1] 3805888a57
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Julien:
- resolve merge conflict
- update changelog link to use version tag
- disable glslang tests
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 53076f0eba)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The squashfs 4.6.1 archive hash has been changed suddenly two weeks
ago by Github without any intended changes from the squashfs maintainer
[1].
The orginal squashfs 4.6.1 archive has been manually uploaded again.
Update the URL to download the archive that match the expected hash.
Since we don't use the github download helper anymore, the squashfs
archive name is changed from squashfs-4.6.1.tar.gz to
squashfs-tools-4.6.1.tar.gz.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/10355448207
(and many more...)
See:
[1] https://github.com/plougher/squashfs-tools/issues/313
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit e374ae03b5)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Add fix to build with cmake 4.x.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Julien: use "git describe --tags --abbrev=40" format in _VERSION]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit f1adb7952d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Removed patch which is included in this release:
e48db06c64
Use upstream-provided license file:
92220248b1
This bump includes compatibility with cmake 4.x:
d7faed1c69
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Julien: remove patch entry in .checkpackageignore]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 4da169b03e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
REMI hasn't received new release since July 2022 and is currently broken
with error:
Traceback (most recent call last):
File "<string>", line 26, in <module>
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/__init__.py", line 116, in setup
_install_setup_requires(attrs)
~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/__init__.py", line 89, in _install_setup_requires
_fetch_build_eggs(dist)
~~~~~~~~~~~~~~~~~^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/__init__.py", line 94, in _fetch_build_eggs
dist.fetch_build_eggs(dist.setup_requires)
~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/build_meta.py", line 80, in fetch_build_eggs
raise SetupRequirementsError(specifier_list)
setuptools.build_meta.SetupRequirementsError: ['setuptools_scm']
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/pyproject_hooks/_in_process/_in_process.py", line 389, in <module>
main()
~~~~^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/pyproject_hooks/_in_process/_in_process.py", line 373, in main
json_out["return_val"] = hook(**hook_input["kwargs"])
~~~~^^^^^^^^^^^^^^^^^^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/pyproject_hooks/_in_process/_in_process.py", line 143, in get_requires_for_build_wheel
return hook(config_settings)
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/build_meta.py", line 331, in get_requires_for_build_wheel
return self._get_build_requires(config_settings, requirements=[])
~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/build_meta.py", line 301, in _get_build_requires
self.run_setup()
~~~~~~~~~~~~~~^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/build_meta.py", line 512, in run_setup
super().run_setup(setup_script=setup_script)
~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/build_meta.py", line 317, in run_setup
exec(code, locals())
~~~~^^^^^^^^^^^^^^^^
File "<string>", line 31, in <module>
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/__init__.py", line 117, in setup
return distutils.core.setup(**attrs)
~~~~~~~~~~~~~~~~~~~~^^^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/_distutils/core.py", line 148, in setup
_setup_distribution = dist = klass(attrs)
~~~~~^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/dist.py", line 323, in __init__
_Distribution.__init__(self, dist_attrs)
~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/_distutils/dist.py", line 309, in __init__
self.finalize_options()
~~~~~~~~~~~~~~~~~~~~~^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/dist.py", line 786, in finalize_options
ep(self)
~~^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools/dist.py", line 806, in _finalize_setup_keywords
ep.load()(self, ep.name, value)
~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^
File "/workdir/instance-0/output-1/host/lib/python3.13/site-packages/setuptools_scm/_integration/setuptools.py", line 82, in version_keyword
assert isinstance(value, dict), "version_keyword expects a dict or True"
~~~~~~~~~~^^^^^^^^^^^^^
AssertionError: version_keyword expects a dict or True
ERROR Backend subprocess exited when trying to invoke get_requires_for_build_wheel
make: *** [package/pkg-generic.mk:273: /workdir/instance-0/output-1/build/python-remi-2022.7.27/.stamp_built] Error 1
make: Leaving directory '/workdir/instance-0/buildroot'
Since last release code has been corrected and now build end
successfully.
Another issue with remi is related to python CGI library no more available with
python 3.13. This patch also updates Config.in to add a select BR2_PACKAGE_PYTHON_LEGACY_CGI
This commit also updates the LICENSE file hash, because line ending
changed from "CR-LF" (Windows) in old release archive to "LF" (Unix)
in the github download. Apart from that, the content is the same.
Fixes:
- https://autobuild.buildroot.org/results/f0409533ebdc31e522f2ee2ea8a5acc11dbc7430/
- https://autobuild.buildroot.org/results/a16cf5105d4b726b5d4136a2d8f82abcfdc0faba/
- https://autobuild.buildroot.org/results/e7ac28e20ad92863d337e96c225463346ee6c690/
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Julien:
- use "git describe --abbrev=40" format in _VERSION
- fix LICENSE hash
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 14ce0d2e6e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
python-glslang is a host-only package and the host-python3 dependency
was wrongly added as target dependency with buildroot commit
f9fe0cf8f6.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 27a38cbcad)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
