The commit 6889056f1e (support/scripts/genimage.sh) adds support for
creating bmap images.
Since then, the script genimage.sh looses the error returned by the
genimage command.
As a consequence, the target-finalize target looses the error as well,
and so on up to make.
This adds the shell option -e to exit immediately if a command ends with
an error, so the error is not ignored.
Fixes:
gportay@archlinux ~/src/rtone-br2-external $ make
(...)
>>> Executing post-image script support/scripts/genimage.sh
INFO: cmd: "mkdir -p "/home/gportay/src/rtone-br2-external/output/build/genimage.tmp"" (stderr):
INFO: cmd: "rm -rf "/home/gportay/src/rtone-br2-external/output/build/genimage.tmp"/*" (stderr):
INFO: cmd: "mkdir -p "/home/gportay/src/rtone-br2-external/output/build/genimage.tmp"" (stderr):
INFO: cmd: "cp -a "/tmp/tmp.EclKGwtA4R" "/home/gportay/src/rtone-br2-external/output/build/genimage.tmp/root"" (stderr):
INFO: cmd: "mkdir -p "/home/gportay/src/rtone-br2-external/output/images"" (stderr):
INFO: vfat(efi-part.vfat): cmd: "mkdosfs '/home/gportay/src/rtone-br2-external/output/images/efi-part.vfat'" (stderr):
INFO: vfat(efi-part.vfat): adding file 'efi-part/EFI' as 'EFI' ...
INFO: vfat(efi-part.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -sp -i '/home/gportay/src/rtone-br2-external/output/images/efi-part.vfat' '/home/gportay/src/rtone-br2-external/output/images/efi-part/EFI' '::EFI'" (stderr):
Disk full
INFO: vfat(efi-part.vfat): cmd: "rm -f "/home/gportay/src/rtone-br2-external/output/images/efi-part.vfat"" (stderr):
ERROR: vfat(efi-part.vfat): failed to generate efi-part.vfat
INFO: cmd: "rm -rf "/home/gportay/src/rtone-br2-external/output/build/genimage.tmp/"" (stderr):
make[1]: Leaving directory '/home/gportay/src/rtone-br2-external/buildroot'
gportay@archlinux ~/src/rtone-br2-external $ echo $?
0
Signed-off-by: Gaël PORTAY <gael.portay+rtone@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Current test runs a Xen hypervisor and a Linux dom0, from which we can
detect that we run under Xen but not much more. Indeed, with current
test's setup the Xen tools are not functional.
We add back networking to our stripped-down kernel config to repair Xen
tools.
With Xen tools functionals, we can enhance the test with the creation of
a VM. To be able to use the rootfs that we build in both the dom0 and in
this new dom1, we switch to an initramfs; no more rootfs partition in
the image. After stripping the ramdisk a bit we can even reduce Qemu's
memory to 1 GB.
Suggested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Fixes the following security issues:
- CVE-2024-56826: A flaw was found in the OpenJPEG project. A heap buffer
overflow condition may be triggered when certain options are specified
while using the opj_decompress utility. This can lead to an application
crash or other undefined behavior.
https://access.redhat.com/security/cve/CVE-2024-56826
- CVE-2024-56827: A flaw was found in the OpenJPEG project. A heap buffer
overflow condition may be triggered when certain options are specified
while using the opj_decompress utility. This can lead to an application
crash or other undefined behavior.
https://access.redhat.com/security/cve/CVE-2024-56827
Release notes: https://github.com/uclouvain/openjpeg/blob/v2.5.3/NEWS.md
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
When the Xen tools are built, a number of init scripts are installed to
the target.
Some of those Xen scripts require bash to run:
- /etc/init.d/S50xencommons
- /etc/init.d/S50xen-watchdog
- /etc/init.d/S60xendomains
- /etc/xen/scripts/launch-xenstore
- /usr/lib/xen/bin/xendomains
Make sure to select bash when the Xen tools are selected (we need to
select "busybox show others" for that, too).
Suggested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Julien Olivain <ju.o@free.fr>
For change log since 20240927, see:
https://github.com/user-attachments/files/18117996/changes.txt
Note: the change log mention "Fix 2 critical CVE addressing memory
leaks" without providing actual CVE numbers. For reference, the
upstream commits for those security fixes are [1] and [2]. From the log
of those commits, it seems those memory leaks can only happen in old
Kernels <= 4.9 (which is end-of-life since January 2023). Technically
those leaks could happen in any program embedding the apcica code
files. The impact seems very low, if any, on the acpica standalone
tools.
[1] 987a3b5cf7
[2] 8829e70e13
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that gdb 16.x has been added, and gdb 15.x made the default, let's
remove support for gdb 13.x.
Aside from the usual removal, we also simplify things a bit as GDB
13.x was the last version that did not require MPFR. As it is now a
mandatory dependencies, things can be simplified.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This requires a bit of trickery on BR2_GDB_VERSION. Indeed, when the
target variant of gdb is enabled, but not the host variant, the
version choice is not available, and a default version is
used. However, version 15.x, which is now the default, requires GCC >=
9, so we have to be careful and use GDB 15.x by default if the
toolchain has GCC >= 9, or stick to GDB 14.x otherwise.
Of course, that will not fly long term, as at some point we'll drop
gdb 14.x, but for the time being, let's default to this older gdb
release if the target compiler is too old.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
At the moment, Buildroot provides genimage v18. However that version
does not yet include the GUID shortcut for 'u-boot-env' partition type.
This convenient change is relatively new (see [1]) and can be expected
in v19. For now, use the GUID value directly.
[1] 3e0a2aea8d
Fixes: 057012eb2c ("configs/orangepi_5_plus: new board")
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch removes the post install fixup now that newlib 4.5.0 supports a
configurable tooldir path using --with-tooldir config option.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch bumps newlib-bare-metal to version 4.5.0.20241231.
The 0001-libgloss-microblaze-fix-read-and-_write-declarati.patch is no longer
needed since it is now included with version 4.5.0.20241231. For this reason,
the patch can be removed from buildroot.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The mipi-dbi-cmd script does not require a particular python3
version. Using BR2_PYTHON3_HOST_DEPENDENCY avoids the need to build
host-python3 if python3 is installed on the host, and nothing else in
the build depends on host-python3.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Suggested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Download submodules which are now required.
Drop patch which is now upstream.
License file renamed without content changes.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit 67089f8c11
"package/fontconfig: add util-linux mandatory dependency"
added the dependency on util-linux because of uuid [1].
This dependency was later replaced [2], so drop the util-linux
dependency.
[1] 7b48fd3dd4
[2] c4324f54ee
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
From https://github.com/troglobit/sysklogd/releases/tag/v2.7.0
- syslogd by default now cap forwarded messages to 1024 bytes. This can
be adjusted using -M size or the config file setting udp_size
- syslogd socket buffering has been reduced from 160 kiB to 80 kiB
- Allow slashes in process names to support, e.g., postfix/qmgr
- Support for extended message filtering based on tag/ident, hostname,
or message property. This allows sorting of messages based on their
origin (program/remote) or content in any of the available message
fields: exact match, case-insensitive substring matching or extended
regular expression
- Support for remote logging to a multicast group, as well as acting as
a multicast group receiver of syslog messages, both IPv4 and IPv6.
Forwarding to multicast groups support two new, per action, options:
- iface=IFNAME to set a different outbound interface
- ttl=1.255 to adjust the TTL of outbound multicast (default: 1)
- libsyslog.a support for egressing multicast, two new struct members
.log_iface and .log_ttl control how the syslogp() API works
- logger support for controlling egressing multicast using a new command
line option, -o iface=IFNAME,ttl=<1..255>
- syslogd now logs the hostname as the FQDN in RFC5424 output format
- Fix parsing of IPv6 addresses in listen .conf directive, as well as
command line option -b [A:B:C:D]:PORT
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds basic support for the new OrangePi 5 Plus board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus-32GB.html
Brief summary of the board features:
- RK3588 Rockchip SoC
- Quad-Core ARM Cortex-A76 Processor 2.4GHz
- Quad-Core ARM Cortex-A55 Processor 1.8GHz
- Mali G610 GPU
- NPU 6 Tops INT4/INT8/INT16/FP16
- LPDDR4x: 8GB/16GB/32GB
- 2x USB 2.0
- 2x USB 3.0
- 2x HDMI out
- PCIe M.2 M-key socket (e.g. for NVMe)
- PCIe M.2 E-key socket (e.g. for WiFi/BT)
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM / CAN / I2S)
- and much much more ...
BSP includes the following components:
- mainline ATF v2.12
- mainline U-Boot v2024.10
- mainline Linux kernel v6.12.x
Unlike all the other boards from board/orangepi directory, this board
is not based on an Allwinner SoC. It is based on Rockchip RK3588 SoC.
So custom scripts and configs are used instead of common options from
the board/orangepi/common directory. Suggested scripts and configs are
based on those of Radxa Rock5B board.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Julien:
- switch to human readable genimage.cfg partition type uuid
- add ATF hash in custom hash patches
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
