- remove 001-dpp-fix-implicit-declaration-of-function-explicit_bz.patch
(upstream applied [1])
- Changelog (since 1.21, from [2]):
ver 1.24:
Fix issue with handshake and missing rekeying support.
Fix issue with BSS ranking and zero signal strength.
Fix issue with setting OWE IE length correctly.
ver 1.23:
Fix issue with handling handshake offloading.
Fix issue with at_console and D-Bus policy.
ver 1.22:
Fix issue with handling periodic scanning.
Fix issue with handling scanning completion.
Fix issue with handling scanning for OWE auto-connect.
Add support for additional DPP features.
[1] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=6ce41f621154eff0145dab41308bc145c0440f16
[2] https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
sshd is broken on 32-bit systems because ppoll_time64 is used by the
application although it is not allowed by the seccomp filter.
Apply the upstream patch to fix this.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to extlinux instead of U-Boot boot script. Drop custom boot
script and genimage config. Instead use common orangepi files from
board/orangepi/common. To help extlinux to find DTB without U-Boot
environment changes, do not strip arm64 board specific directory
from DTB name when installing it in /boot directory. For this
purpose use BR2_KERNEL_DTB_KEEP_DIRNAME config option. Finally,
tidy up configuration file adding section names.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Bump Linux to version 5.4.137
- Bump U-Boot to add new targets, version remains the same
- Drop BR2_ROOTFS_OVERLAY and remove S09modload script because it was
only used by PFE and now PFE is loaded directly by the kernel
- Use Image.gz instead of Image to have a compressed kernel
- Rename ucls1012a.its to br2-ucls1012a.its since post-build.sh and
post-image.sh use different name. This fixes the bug that didn't
allow the creation of the part0-000000.itb file.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes:
* Switch to common orangepi scenario for multiple boards (board/orangepi/common) to create an SD image.
* Exclude FAT partition, it is no longer needed for U-Boot.
* Switch SD image from MBR to GPT for partition-uuid to work.
* Switch to extlinux, this is convenient for debugging.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new package provides "lzma_alone" host binary based on the original
LZMA SDK. It provides few extra options when compared to the LZMA Utils
/ XZ Utils project "lzma" binary (already packaged as the "lzma").
This packaging schema (LZMA SDK with lzma -> lzma_alone rename) follows
Debian's solution. Please note that Debian also uses LZMA SDK for the
base "lzma" tool which may be considered for Buildroot too - as an
independent change. Similar packaging is also used by Ubuntu & Arch.
lzma_alone is a requirement for preparing firmware images for some
Broadcom based home routers with a picky CFE bootloader. It has limited
LZMA support and building compatible images requires specifying
dictionary size and lc/lp/pb LZMA values manually.
Version 9.22 is used as it's the last release using .tar.bz2 format. The
same version is used by Debian.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[yann.morin.1998@free.fr:
- add the upstream sha1, add comments
- fix license
- add license file and its sha256
- fix coding styles
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
OLA_AUTORECONF has been set since re-introduction of package in commit
16ff948444 but it is not needed as no
patches are touching Makefile.am or ola.m4 anymore
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Technologic Systems has rebranded as embeddedTS with the current
domain eventually going offline. Update web/doc URLs to correct
resource locations.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default currently is to rely on the package name to decide what to
build and install if not specified by the caller. This works nice for
target packages, where a 'foo' package will by default build and
install a 'foo' executable.
However, for host packages, that will build and install a 'host-foo'
exzcutable, which is not really, even really not, what would be
expected.
We fix that by using the package raw name, i.e. the package name with
the host- prefix yanked away.
It is very improbable that there already are many host-golang packages in
the wild (in br2-external trees), but if there are, they would forcibly
define those variables to a sane value. This change is not incompatible, as
the values provided by packages take precedence; it's just that those
packages now carry superfluous, if innocuous, variable assignments.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop custom install rules which were added since commit
676797d57f. Indeed, they result in a
broken installation. Especially, they are trying to "guess" what must
be installed based on BR2_ARCH but oprofile has its own logic. For
example, goldmont microarchitecture files must be installed in i386
directory even if this architecture is 64 bits:
0ad5a9e6af
This will result in the following runtime failure:
oprofile: could not open unit mask description file /usr/share/oprofile//i386/goldmont/unit_masks
Unable to find info for event cpu_clk_unhalted
Fixes:
- https://bugs.buildroot.org/show_bug.cgi?id=14641
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6e33e59080.
This unfortunately breaks a number of packages, as glibc errors out if 64bit
time_t is used without 64bit file offsets, and some packages undefine
_FILE_OFFSET_BITS leading to build breakage:
# if ! defined (_FILE_OFFSET_BITS) || _FILE_OFFSET_BITS != 64
# error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
..
So revert it for 2022.02.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
