The configure script of xutil_makedepend uses PKG_CHECK_MODULES(), so
it should depend on host-pkgconf. Otherwise, a "make
host-xutil_makedepend" fails with:
"""
checking for X... configure: error: in `/home/thomas/projets/buildroot/output/build/host-xutil_makedepend-1.0.5':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables X_CFLAGS
and X_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
"""
This was detected using per-package host/target directories, but can
be reproduced without it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 73185f1270)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 2524acd417
("package/x11r7/xlib_libxshmfence: bump version to 1.3"), the patch
0001-configure.ac-call-AC_USE_SYSTEM_EXTENSIONS.patch was dropped, but
the corresponding AUTORECONF = YES was not dropped.
This causes a build issue if just xlib_libxshmfence is built (using
"make xlib_libxshmfence" or using per-package host/target directories):
>>> xlib_libxshmfence 1.3 Autoreconfiguring
configure.ac:40: error: must install xorg-macros 1.3 or later before running autoconf/autogen
configure.ac:40: the top level
This commit fixes that by dropping the no longer needed
AUTORECONF = YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bcf4b72def)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mrouted part of igmpproxy is licensed under BSD-3-Clause so add this in
IGMPPROXY_LICENSE and add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c60c928614)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As specified in COPYING, examples are licensed under GPL-3.0+ and .x
files are licensed under BSD-2-Clause.
So update LIBNFS_LICENSE, add COPYING, LICENCE-BSD.txt and
LICENCE-GPL-3.txt to LIBNFS_LICENSE_FILES and add hash for all license
files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1b486d4fa3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cppcms contains embedded third party software so add
THIRD_PARTY_SOFTWARE.TXT to CPPCMS_LICENSE_FILES as well as the
additional licenses to CPPCMS_LICENSE.
Also add hash for COPYING.TXT and THIRD_PARTY_SOFTWARE.TXT
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c17310450b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
brltty 5.5 is licensed under GPL-2.0+ with exceptions in LGPL-2.1+ for
data and client side as specified in README so add this information in
BRLTTY_LICENSE, update BRLTTY_LICENSE_FILES and add hash for README
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ecf832704b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The underlying problem is that $(foreach V,1 2 3,) does not evaluate to
an empty string. It evaluates to " ", three empty strings separated by
whitespace.
A construct of this format, with a giant list in the foreach, is part of
the printvars command. This means that "@:$(foreach ....)", which is
intended to expand to a null command, in fact expands to "@: "
with a great deal of whitespace. Make chooses to execute this command
with:
execve("/bin/sh", ["/bin/sh", "-c", ": "]
But with far more whitespace. So much that it can exceed shell command
line length limits.
This solution is to move the foreach to another step in the recipe. The
"@:" is retained as the first line so the recipe is not Empty, which
would cause a change in make behavior when make builds the target. The
2nd line, all whitespace, will be skipped by make.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b8d0aadc6d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When running this command on a powernv machine, dtc crashes:
dtc -f -I fs -O dts /sys/firmware/devicetree
Upstream has fixed the segfault but have not made a release yet so we
add the patch for now.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3729389a68)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the following defconfig:
BR2_aarch64=y
BR2_BINUTILS_VERSION_2_28_X=y
BR2_GCC_VERSION_4_9_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
The build fail with this error:
In file included from ../sysdeps/ieee754/flt-32/math_config.h:23:0,
from ../sysdeps/ieee754/flt-32/e_expf.c:29:
../sysdeps/aarch64/fpu/math_private.h: In function 'roundtoint':
../sysdeps/aarch64/fpu/math_private.h:311:3: error: implicit declaration of function 'vrndn_f64' [-Werror=implicit-function-declaration]
return vget_lane_f64 (vrndn_f64 (vld1_f64 (&x)), 0);
^
cc1: all warnings being treated as errors
vrndn_f64 function has been introduced in glibc code since version 2.27 [1].
So we can't build a glibc based toolchain with gcc 4.9 anymore.
Add a new dependency in the toolchain infra to avoid selecting
glibc toolchain using gcc 4.9.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=72aa623345ada1276ed89dbc00fdff9639cb8eaf
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1380f4c9a6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nine years ago we added autoreconf to fix libtool-related problems
with the matchbox package:
https://git.buildroot.net/buildroot/commit/?id=51ef5b81224c243aa7f937c4690b1a120c81ccbc
After building this defconfig with autoreconf removed from this package
BR2_x86_64=y
BR2_x86_core_avx2=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFONT=y
BR2_PACKAGE_MATCHBOX=y
BR2_PACKAGE_MATCHBOX_SM=y
BR2_PACKAGE_MATCHBOX_COMMON=y
BR2_PACKAGE_MATCHBOX_COMMON_PDA=y
BR2_PACKAGE_MATCHBOX_DESKTOP=y
BR2_PACKAGE_MATCHBOX_KEYBOARD=y
BR2_PACKAGE_MATCHBOX_PANEL=y
BR2_PACKAGE_MATCHBOX_STARTUP_MONITOR=y
it is obvious that the problem which existed nine years ago seems to be
gone, therefore we remove autoreconf from this package because there is
no need for it anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3ae61eac51)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nine years ago we added autoreconf to fix libtool-related problems
with the matchbox package:
https://git.buildroot.net/buildroot/commit/?id=51ef5b81224c243aa7f937c4690b1a120c81ccbc
Autoreconf for this package needs the xutil_util-macros but after
building this defconfig with autoreconf removed from this package
BR2_x86_64=y
BR2_x86_core_avx2=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFONT=y
BR2_PACKAGE_MATCHBOX=y
BR2_PACKAGE_MATCHBOX_SM=y
BR2_PACKAGE_MATCHBOX_COMMON=y
BR2_PACKAGE_MATCHBOX_COMMON_PDA=y
BR2_PACKAGE_MATCHBOX_DESKTOP=y
BR2_PACKAGE_MATCHBOX_KEYBOARD=y
BR2_PACKAGE_MATCHBOX_PANEL=y
BR2_PACKAGE_MATCHBOX_STARTUP_MONITOR=y
it is obvious that the problem which existed nine years ago seems to be
gone. So instead of fixing autoreconf we remove it from this package
because there is no need for it anymore.
Fixes
http://autobuild.buildroot.net/results/30c/30cf5cc139f9f6a9dc070953270f74e18b9310d4/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 534706e260)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 879fa7f82a, the
BR2_INIT_SYSTEMD option was changed to allow selecting with a uClibc
toolchain. Unfortunately, the corresponding Config.in comment, which
was already bogus, was not updated to take into account the numerous
dependencies of BR2_INIT_SYSTEMD.
Due to this, even if you have uClibc enabled, the BR2_INIT_SYSTEMD
option may not be visible, and the Config.in comment may also not be
visible, leaving the user in the dark.
This commit fixes the dependencies of the Config.in comment so that
they match the one of the BR2_INIT_SYSTEMD option.
Reported-by: Raphael Jacob <r.jacob2002@gmail.com>
Cc: Raphael Jacob <r.jacob2002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3c631c741c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using the legacy buildsystem, the kconfig parser may still be used,
as reported by Thomas:
>>> uboot 2018.09 Configuring
...]
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
YACC scripts/kconfig/zconf.tab.c
bin/sh: 1: bison: not found
ake[3]: *** [scripts/kconfig/zconf.tab.c] Error 127
ake[3]: *** Waiting for unfinished jobs....
LEX scripts/kconfig/zconf.lex.c
bin/sh: 1: flex: not found
However, in that case, the kconfig parser is only generated during the
'configure' step, so we can add bison/flex as standard dependencies.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e7b2a7dfff)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Second patch added support to link with -latomic if needed however using
LDFLAGS doesn't work when statically linking because LDFLAGS is added
before LIBS
Detection of atomic fails with:
configure:23230: /accts/mlweber1/instance-2/output/host/bin/sparc-linux-g++ -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -static -static -pedantic -Werror -Wall -D_GNU_SOURCE -D_REENTRANT -D_THREAD_SAFE -Wno-long-long -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static -latomic conftest.cpp -lrt -lpthread -lstdc++ >&5
/tmp/ccgrvVTg.o: In function `main':
conftest.cpp:(.text.startup+0x10): undefined reference to `__atomic_fetch_add_4'
collect2: error: ld returned 1 exit status
So use LIBS instead of LDFLAGS
As second patch was already merged upstream, a new PR was sent:
https://github.com/zeromq/libzmq/pull/3250
Fixes:
- http://autobuild.buildroot.net/results/c471d6b1061a8516f7772735e471db68a32965aa
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 14f5cb7daa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the function add_one_group is called on an existing group,
make sure the members of this group are not removed in the process of
deleting then re-adding the group.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add curly braces when referencing ${members}, as suggested by
Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 497f7134fc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's preferable to use "shutdown -hP now" to ensure that the runlevel is
known, preventing this message on the system console and log:
WARNING: could not determine runlevel - doing soft poweroff
(it's better to use shutdown instead of poweroff from the command line)
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ab842ce21d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e047dee241 adds an upstream patch
to fix a build issue with soxr. The patch also adds detecting soxr
using pkg-config. Upstream detected an config issue [1], where the
resulting binary lacks soxr support, although libsoxr was correctly
detected.
This patch adds a define for `HAVE_LIBSOXR` when using pkg-config.
Backported from: cd6a99a7cfde1c5e1c1cc74ee6a77041bb4012d9
[1] https://github.com/mikebrady/shairport-sync/issues/740
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ac4bca24ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fio does not have any special conditions since version 2.2.6 indeed
MORAL-LICENSE has been updated to replace "promising" by "encouraged"
and "must" by "should":
67f4822ce3
So fix LICENSE, add MORAL-LICENSE to LICENSE_FILES and add hash for both
licenses
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c4f923176a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5virtualkeyboard 2.0 (shipped with Qt 5.6) installs the QML plugin
under the directory Enterprise while the later versions install it
without that directory.
Differentiate installation to target of the QML plugin according to
the Qt major version in use.
Also, make sure the /usr/qml/QtQuick directory exists before the copy.
Fixes:
>>> qt5virtualkeyboard 2.0 Installing to target
mkdir -p /home/gportay/src/buildroot/output/target/usr/lib/qt/plugins/platforminputcontexts
cp -dpfr /home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/qt/plugins/platforminputcontexts/libqtvirtualkeyboardplugin.so /home/gportay/src/buildroot/output/target/usr/lib/qt/plugins/platforminputcontexts
cp -dpfr /home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabi/sysroot/usr/qml/QtQuick/VirtualKeyboard /home/gportay/src/buildroot/output/target/usr/qml/QtQuick
cp: cannot stat '/home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabi/sysroot/usr/qml/QtQuick/VirtualKeyboard': No such file or directory
package/pkg-generic.mk:310: recipe for target '/home/gportay/src/buildroot/output/build/qt5virtualkeyboard-2.0/.stamp_target_installed' failed
make: *** [/home/gportay/src/buildroot/output/build/qt5virtualkeyboard-2.0/.stamp_target_installed] Error 1
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Files list maintained by me in DEVELOPERS file is not
in proper order, fix it with ascending order.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add missing license hashes for those three third-parties:
- src/virtualkeyboard/3rdparty/openwnn/NOTICE
- src/virtualkeyboard/3rdparty/pinyin/NOTICE
- src/virtualkeyboard/3rdparty/tcime/COPYING
Fixes:
>>> qt5virtualkeyboard 5.11.1 Collecting legal info
LICENSE.GPL3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
ERROR: No hash found for src/virtualkeyboard/3rdparty/openwnn/NOTICE
ERROR: No hash found for src/virtualkeyboard/3rdparty/pinyin/NOTICE
ERROR: No hash found for src/virtualkeyboard/3rdparty/tcime/COPYING
src/virtualkeyboard/3rdparty/lipi-toolkit/MIT_LICENSE.txt: OK (sha256: 7a45a9769d19545480a241230e6ea520b5156fac00930dcd69b6886749743d10)
In order to make this possible, we use a different hash file for the
old version (2.0, used with Qt 5.6) and new (5.11, used with Qt 5.11)
versions of qt5virtualkeyboard.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Little CMS (aka Little Color Management System) 2.9 has an integer overflow
in the AllocateDataSet function in cmscgats.c, leading to a heap-based
buffer overflow in the SetData function via a crafted file in the second
argument to cmsIT8LoadFromFile.
For more details, see:
https://github.com/mm2/Little-CMS/issues/171https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-16435
The upstream fix unfortunately includes a number of unrelated changes, but
thse files are not used when building for Linux.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
