Privilege separation mode is undesirable in some use cases.
Let's allow the user to disable it, at least.
Signed-off-by: Konstantin Menyaev <konstantin.menyaev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
If external clang is available on the host system, the buildsystem tries
to use it. The result will be unpredictable. We can't use the version of
clang that is shipped with buildroot either, because it is too old. See:
https://code.qt.io/cgit/qt/qttools.git/tree/.cmake.conf?h=6.8.1. So we
disable clang support in qt6tools for now.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
The previous commit removed its only user. It was a blind option so no
legacy handling is needed.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Since we don't need assistant, designer or linguist on target, and we
don't need assistant or designer on host, we unconditionally disable
these tools, to avoid build failures without inreasing the complexity of
the package.
Fixes target linguist build:
-- Could NOT find Qt6LinguistTools (missing: Qt6LinguistTools_DIR)
CMake Error at <...>/output/build/qt6base-6.8.1/cmake/QtToolHelpers.cmake:768 (message):
Failed to find the host tool "Qt6::lconvert". It is part of the
Qt6LinguistTools package, but the package could not be found. Make sure
you have built and installed the host Linguist module, which will ensure
the creation of the Qt6LinguistTools package.
Call Stack (most recent call first):
<...>/output/build/qt6base-6.8.1/cmake/QtToolHelpers.cmake:83 (qt_internal_find_tool)
src/linguist/lconvert/CMakeLists.txt:9 (qt_internal_add_tool)
The following defconfig triggers a target linguist build without
building the necessary lconvert host tool. See:
https://code.qt.io/cgit/qt/qttools.git/tree/src/linguist/CMakeLists.txt?h=6.8.1#n17
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_VFP=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_MUSL_STABLE=y
BR2_PACKAGE_QT6=y
BR2_PACKAGE_QT6BASE_GUI=y
BR2_PACKAGE_QT6BASE_PNG=y
BR2_PACKAGE_QT6BASE_WIDGETS=y
BR2_PACKAGE_QT6TOOLS=y
Fixes target designer build:
CMake Error at <...>/output/build/qt6base-6.8.1/cmake/QtPublicWalkLibsHelpers.cmake:267 (message):
The Xml target is mentioned as a dependency for Designer, but not declared.
Call Stack (most recent call first):
<...>/output/build/qt6base-6.8.1/cmake/QtPrlHelpers.cmake:8 (__qt_internal_walk_libs)
<...>/output/build/qt6base-6.8.1/cmake/QtPrlHelpers.cmake:47 (qt_collect_libs)
<...>/buildroot/output/build/qt6base-6.8.1/cmake/QtModuleHelpers.cmake:1027 (qt_generate_prl_file)
<...>/buildroot/output/build/qt6base-6.8.1/cmake/QtScopeFinalizerHelpers.cmake:24:EVAL:1 (qt_finalize_module)
src/designer/src/lib/CMakeLists.txt:DEFERRED
The following defconfig triggers a target designer build, without
selecting the necessary xml qt6base option. See:
https://code.qt.io/cgit/qt/qttools.git/tree/configure.cmake?h=6.8.1#n64https://code.qt.io/cgit/qt/qttools.git/tree/src/designer/src/lib/CMakeLists.txt?h=6.8.1#n182
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_VFP=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_MUSL_STABLE=y
BR2_PACKAGE_QT6=y
BR2_PACKAGE_QT6BASE_GUI=y
BR2_PACKAGE_QT6BASE_PNG=y
BR2_PACKAGE_QT6BASE_WIDGETS=y
BR2_PACKAGE_QT6TOOLS=y
Fixes target assistant build:
CMake Error at <...>/output/build/qt6base-6.8.1/cmake/QtToolHelpers.cmake:768 (message):
Failed to find the host tool "Qt6::qhelpgenerator". It is part of the
Qt6ToolsTools package, but the package did not contain the tool. Make sure
that the host module Tools was built with all features enabled (no
explicitly disabled tools).
Call Stack (most recent call first):
<...>/buildroot/output/build/qt6base-6.8.1/cmake/QtToolHelpers.cmake:83 (qt_internal_find_tool)
src/assistant/qhelpgenerator/CMakeLists.txt:9 (qt_internal_add_tool)
The following defconfig triggers a target assistant build, without
building the necessary qhelpgenerator host tool. See:
https://code.qt.io/cgit/qt/qttools.git/tree/configure.cmake?h=6.8.1#n45https://code.qt.io/cgit/qt/qttools.git/tree/src/assistant/CMakeLists.txt?h=6.8.1#n4https://code.qt.io/cgit/qt/qttools.git/tree/src/assistant/CMakeLists.txt?h=6.8.1#n21
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_VFP=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_MUSL_STABLE=y
BR2_PACKAGE_QT6=y
BR2_PACKAGE_QT6BASE_GUI=y
BR2_PACKAGE_QT6BASE_PNG=y
BR2_PACKAGE_QT6BASE_PRINTSUPPORT=y
BR2_PACKAGE_QT6BASE_SQL=y
BR2_PACKAGE_QT6BASE_SQLITE=y
BR2_PACKAGE_QT6BASE_WIDGETS=y
BR2_PACKAGE_QT6TOOLS=y
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Since version bump to 7.12 (upstream commit [1]) the openssl/mbedtls support
defines changed from MG_ENABLE_OPENSSL/MG_ENABLE_MBEDTLS to
MG_TLS=MG_TLS_OPENSSL and MG_TLS=MG_TLS_MBED.
[1] 0613cc62f4
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The CVE database was updated and includes the additional "up to
(including) 4.97" version information.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The aarch64 virt platform doesn't have any default VGA devices so we
don't need to configure them here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since Python 3.13 BaseSelectorEventLoop.add_reader() and
BaseSelectorEventLoop.add_writer() use the mapping returned by
selector.get_map() to detect if a file object is already
registered. This fails with the implementation in gi.events._Selector
if some calls use a file object, and others the raw file descriptor.
Full upstream bug report:
https://gitlab.gnome.org/GNOME/pygobject/-/issues/689
This bug breaks package/python-aiomqtt, because its client object uses
file objects in some places for the connection socket, and the file
descriptor in others. The result is that the connection attempt times
out because source registration fails, and the Future that marks
successful connection never resolves.
This commit adds the fix as backported to PyGObject 3.50 [1] so it can
be cherry-picked to Buildroot stable versions using that version.
[1] https://gitlab.gnome.org/GNOME/pygobject/-/merge_requests/423
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a patch that removes part of the logic that attempts to detect if
thumb is supported. This logic simply doesn't work at all in the
Buildroot context. In fact, thumb is supported on all 32-bit ARM on
which we can build qt5webengine.
Fixes:
WARNING: Thumb instruction set is required to build ffmpeg for QtWebEngine.
[...]
FAILED: obj/third_party/ffmpeg/ffmpeg_internal/vp8.o
[...] -c ../../3rdparty/chromium/third_party/ffmpeg/libavcodec/vp8.c -o obj/third_party/ffmpeg/ffmpeg_internal/vp8.o
{standard input}: Assembler messages:
{standard input}:1119: Error: bad instruction `ldrhcs r0,[ip],#2'
{standard input}:1156: Error: bad instruction `ldrhcs r9,[ip],#2'
{standard input}:1190: Error: bad instruction `ldrhcs lr,[ip],#2'
{standard input}:1253: Error: bad instruction `ldrhcs r9,[r7],#2'
[...]
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Cc: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Ideally we should update our version of qt5webengine-chromium first,
we're more than 600 commits behind on the stable branch from KDE.
However, this is a quick fix solution that allows us to build the
current state in Fedora 42.
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Add a patch that adds missing #include statements, which becomes an
error in GCC 15.
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
pydantic pins an exact version of pydantic-core in it's pyproject.toml
[1]. This was missed during the last pydantic bump where pydantic-core
was erroneously updated to the latest release instead, in commit [2]
and [3].
Modify the pydantic runtime test to catch this error in the future.
[1] https://github.com/pydantic/pydantic/blob/v2.11.4/pyproject.toml#L49
[2] e1c939e426
[3] e42de820cd
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
[Julien: add reference to commits introducing the issue]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since Buildroot commit [1], the runtime test emulator infra is setting
the emulated system date to the host date.
While this is desired in general, this behaviour is introducing a
variability in the test execution. Depending if the test is executed
during winter or summer time, the output of the command "date +%Z"
will produce a different output.
This commit fixes the issue by setting a fixed date and time on the
emulated system. The date is fixed to Unix Epoch plus one hour. This
is because Linux cannot set the system date to a value less than the
system uptime. So we cannot set the time back to Unix Epoch with the
command "date -s @0" (this would result to a EINVAL Invalid argument).
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/9922589073https://gitlab.com/buildroot.org/buildroot/-/jobs/9922589081
[1] cf8641b73e
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit e3329a1e82 ("configs/imx8mn_bsh_smm_s2[_pro]: bump Linux to
6.12.23 and U-Boot to 2025.04") broke the U-Boot boot process on the
BSH SMM S2 board. I didn’t notice it because I mistakenly tested the
patch on the SMM S2PRO board, which boots from eMMC instead of NAND.
Next time, I won’t forget to test on both boards :).
Fixes: e3329a1e82 ("configs/imx8mn_bsh_smm_s2[_pro]: bump Linux to 6.12.23 and U-Boot to 2025.04")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit 4e95062f8 ("package/pkg-meson: use buildroot-build for build
directory") changed the build directory for meson packages to
'buildroot-build', so update the find invocation to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4e95062f8 ("package/pkg-meson: use buildroot-build for build directory")
changed the build directory for meson packages to 'buildroot-build'.
Thus accessing the build directory for installing the extra utils needs
to be adopted to this directory. Otherwise the install will fail when
BR2_PACKAGE_KMSXX_INSTALL_TESTS is enabled.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the meson build directory was changed to buildroot-build in
4e95062f82 we forgot to update the
install path for the systemd-boot efi binary.
Fixes:
/usr/bin/install: cannot stat '/home/buildroot/buildroot/output/build/systemd-256.7/build/src/boot/efi/systemd-bootx64.efi': No such file or directory
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit d1757fdfb0, at-spi2-core
depends on !BR2_STATIC_LIBS, but this wasn't properly propagated to
reverse dependencies, so let's do this propagation now.
Fixes the following warning:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_AT_SPI2_CORE
Depends on [n]: BR2_TOOLCHAIN_HAS_THREADS [=y] && BR2_USE_MMU [=y] && BR2_USE_WCHAR [=y] && !BR2_STATIC_LIBS [=y]
Selected by [y]:
- BR2_PACKAGE_ATKMM [=y] && BR2_INSTALL_LIBSTDCPP [=y] && BR2_TOOLCHAIN_GCC_AT_LEAST_7 [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y] && BR2_USE_MMU [=y] && BR2_USE_WCHAR [=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the sane-airscan package was introduced in
f78280bf26, the depends on of options
that is selects were not properly accounted for, so let's fix this.
Fixes:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_GNUTLS
Depends on [n]: !BR2_STATIC_LIBS [=n] && BR2_USE_WCHAR [=n]
Selected by [y]:
- BR2_PACKAGE_SANE_AIRSCAN [=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the package was introduced in commit
02de349895, it selects
BR2_PACKAGE_PYTHON_JSONSCHEMA without taking care of its dependencies,
causing the following warning:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_PYTHON_JSONSCHEMA
Depends on [n]: BR2_PACKAGE_PYTHON3 [=y] && BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS [=n]
Selected by [y]:
- BR2_PACKAGE_PYTHON_FLASK_RESTX [=y] && BR2_PACKAGE_PYTHON3 [=y]
Fix this by adding the missing depends on.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8c9c1222b7 (package/uacme: bump version to 1.7.6) bumperd the
version to 1.7.6 which includes the patch we carried, so the patch was
dropped, but the corresponding autoreconf was not.
Do so now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Nicola Di Lieto <nicola.dilieto@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The esp-hosted package was introduced in [1] defining the variable
ESP_HOSTED_LICENSE_FILE (singular). The name should be
ESP_HOSTED_LICENSE_FILES (plural). This typo makes the license file
being ignored during a "make legal-info" which shows a warning at
the end:
WARNING: esp-hosted-9a2312b0b: cannot save license (ESP_HOSTED_LICENSE_FILES not defined)
Fixing the variable name also reveals the license file path was
incorrect. The "esp_hosted_ng/host/" directory prefix is missing.
Finally, setting the correct path shows the hash was wrong (it was
the hash of the Apache-2.0 [2] file, which corresponds to another
unused code portion). So the license file hash is also changed to
correspond to the correct GPL-2.0 license file.
This commit fixes all the needed esp-hosted legal-info.
[1] 7b2e5e6550
[2] https://github.com/espressif/esp-hosted/blob/release/ng-v1.0.4.0.0/LICENSES/Apache-2.0
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Fixes the following CVEs:
- CVE-2025-3015: A vulnerability classified as critical has been found in
Open Asset Import Library Assimp 5.4.3. This affects the
function Assimp::ASEImporter::BuildUniqueRepresentation of
the file code/AssetLib/ASE/ASELoader.cpp of the component
ASE File Handler. The manipulation of the argument mIndices
leads to out-of-bounds read. It is possible to initiate the
attack remotely. The exploit has been disclosed to the
public and may be used.
See: https://www.cve.org/CVERecord?id=CVE-2025-3015
- CVE-2025-3016: A vulnerability classified as problematic was found in
Open Asset Import Library Assimp 5.4.3. This vulnerability
affects the function Assimp::MDLImporter::ParseTextureColorData
of the file code/AssetLib/MDL/MDLMaterialLoader.cpp of the
component MDL File Handler. The manipulation of the argument
mWidth/mHeight leads to resource consumption.
The attack can be initiated remotely
See: https://www.cve.org/CVERecord?id=CVE-2025-3016
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Django includes code from a couple of other projects, add their
respective license files and licenses to the django package.
./utils/scanpypi finds most of these. Additionally this was
cross-checked against debian's license list [1], not including some
things that no longer exist or no longer indicate separate licensing
upstream:
* django/contrib/admin/static/admin/fonts/
* django/utils/baseconv.py
* django/utils/ipv6.py
* django/utils/autoreload.py
Also not included are separate licensing for docs, which buildroot
doesn't package:
* docs/_theme/djangodocs/static/reset-fonts-grids.css
* docs/_theme/djangodocs/static/fontawesome/LICENSE.txt
[1] https://metadata.ftp-master.debian.org/changelogs//main/p/python-django/python-django_5.2-1_copyright
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
[Peter: Indent with single tab]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 0586ee6cba.
The dependency is not needed any more with package/python3 providing
3.13 (since commit d63e207eb8).
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
[Julien: reword commit log title]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This fixes the following CVE:
- CVE-2025-47287: When Tornado's ``multipart/form-data`` parser encounters
certain errors, it logs a warning but continues trying to
parse the remainder of the data. This allows remote
attackers to generate an extremely high volume of logs,
constituting a DoS attack.
Fixes:
https://www.cve.org/CVERecord?id=CVE-2025-47287
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
[Julien: reword commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This fixes a memory leaks that affects both binutils 2.43 and 2.44,
see https://www.cve.org/CVERecord?id=CVE-2025-3198
Fixes the following CVE:
- CVE-2025-3198: A vulnerability has been found in GNU Binutils 2.43/2.44
and classified as problematic. Affected by this
vulnerability is the function display_info of the file
binutils/bucomm.c of the component objdump.
The manipulation leads to memory leak.
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The test_xen.py runtime test, introduced in [1] and improved in [2],
is calling a "stty raw" command, just after the emulated machine
login, to avoid double-cooking the consoles. This double-cooking
prevents the test controller to correctly get the command error codes.
Buildroot commit [3] "support/testing: set date in emulated machine"
introduced an invocation of the date command to set time on the
emulated machine, just after the login. The returned error code is also
checked. Since this commit [3], the test_xen runtime test is failing
while attempting to set the date. This is because it is invoked before
the test script executes this "stty raw" command.
The need of executing a command just after the login, and just
before we set the emulated machine date is very limited. It is almost
specific to this test. So, rather than changing the test
infrastructure, this commit simply moves this "stty raw" invocation
from the runtime test script to a custom /etc/profile.d/stty-raw.sh
file on target rootfs overlay, to do this call just at the login.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/10000011350
[1] 055f82ebbd
[2] cd0ffd598c
[3] cf8641b73e
Cc: Vincent Stehlé <vincent.stehle@laposte.net>
Tested-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
