This fixes the following vulnerability:
- CVE-2025-64503:
cups-filters contains backends, filters, and other software required
to get the cups printing service working on operating systems other
than macos. In cups-filters prior to 1.28.18, by crafting a PDF file
with a large `MediaBox` value, an attacker can cause CUPS-Filter 1.x’s
`pdftoraster` tool to write beyond the bounds of an array. First, a
PDF with a large `MediaBox` width value causes `header.cupsWidth` to
become large. Next, the calculation of `bytesPerLine =
(header.cupsBitsPerPixel * header.cupsWidth + 7) / 8` overflows,
resulting in a small value. Then, `lineBuf` is allocated with the
small `bytesPerLine` size. Finally, `convertLineChunked` calls
`writePixel8`, which attempts to write to `lineBuf` outside of its
buffer size (out of bounds write). In libcupsfilters, the maintainers
found the same `bytesPerLine` multiplication without overflow check,
but the provided test case does not cause an overflow there, because
the values are different. Commit
50d94ca0f2fa6177613c97c59791bde568631865 contains a patch, which is
incorporated into cups-filters version 1.28.18.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2025-64503
- 50d94ca0f2
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This fixes the following vulnerability:
- CVE-2026-34933:
Avahi is a system which facilitates service discovery on a local
network via the mDNS/DNS-SD protocol suite. Prior to version 0.9-rc4,
any unprivileged local user can crash avahi-daemon by sending a single
D-Bus method call with conflicting publish flags. This issue has been
patched in version 0.9-rc4.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-34933
- 0be89b6bb5
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Upstream v85 no longer requires the -Dfwctl=enabled / -Dkeyutils=enabled
workaround, so drop both options along with the stale comment.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
https://blog.clamav.net/2026/07/clamav-153-and-145-security-patch.html
Fixes CVE-2026-20213, CVE-2026-20214, CVE-2026-20215, CVE-2026-20216,
CVE-2026-20217, CVE-2026-20243 & CVE-2026-20244.
"Upgraded the Rust tar dependency to resolve the RUSTSEC-2026-0067 and
RUSTSEC-2026-0068 advisories, and upgraded the Rust openssl dependency
to resolve CVE-2026-41676."
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Removed patch which is included in this bump.
Fixes CVE-2026-5435, CVE-2026-6238 & CVE-2026-6791.
git shortlog 4070d808bea1c077eb7e7d52b52b91cae98205d5..
Adhemerval Zanella (3):
math: Fix fma alignment when exponent difference is exactly 64 (BZ 34183)
arm: Save/restore VFP registers in PLT trampolines (BZ 34144, BZ 15792)
posix: Fix stack overflow in wordexp tilde expansion (BZ 34091, CVE-2026-6791)
Florian Weimer (8):
iconv: Suppress intermediate errors with //TRANSLIT (bug 34236)
resolv: Declare __p_class_syms, __p_type_syms for internal use
resolv: Fix ns_sprintrrf formatting of class, type values (bug 34289)
resolv: Improve formatting of unknown records in ns_sprintrrf
resolv: Check for inet_ntop failure in ns_sprintrrf
resolv: More types as unknown in ns_sprintrrf (CVE-2026-5435)
resolv: Fix buffer overreads in ns_sprintrrf (CVE-2026-6238)
resolv: Add test case tst-ns_sprintrr (bug 34033, bug 34069)
Jakub Jelinek (1):
Rename __unused fields to __glibc_reserved.
John David Anglin (1):
hppa: Fix missing call to __feraiseexcept (BZ 34306)
Pino Toscano (1):
Hurd: comment PF_LINK/AF_LINK defines
Sam James (1):
elf: don't clobber ld.so.conf in tst-glibc-hwcaps-prepend-cache [BZ #34210]
Samuel Thibault (3):
Hurd: comment PF_ROUTE/AF_ROUTE defines
Hurd: comment ioctls which cannot currently compile
Hurd: restore some SIOC ioctls
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The 'mlkem.h' header is no longer present in wolfssl v5.9.2 [1] and the
content was merged in the 'wc_mlkem.h' header.
[1] 7a2cf5b655
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since the bump of autoconf to version 2.73 in commit a6e8c07a33,
the TestApache test fails on CI runners (and in autobuilders [2]) with
our current docker image (GCC 12.2.0) :
gcc: error: unrecognized command-line option '-std=gnu23'; did you mean '-std=gnu2x'?
make[3]: *** [Makefile:136: tools/gen_test_char] Error 1
Autoconf 2.73 introduced checks for the C23 standard [1]. During the
configuration step, it tests the target compiler. If the target compiler
supports it (e.g., GCC 14+), autoconf caches `ac_cv_prog_cc_c23=yes`
and appends `-std=gnu23` to the compiler flags.
Later in the process, APR uses the `AX_PROG_CC_FOR_BUILD` macro to
configure the host compiler in order to build the `gen_test_char`
utility. However, APR's `ax_prog_cc_for_build.m4` macro uses a
pushdef/popdef mechanism that only isolates older C standards.
It fails to isolate the newly introduced `ac_cv_prog_cc_c23` variable
because the ax_prog_cc_for_build.m4 file was not updated to handle it.
As a result, the host compiler evaluation reads the target's cached
variables, assumes the host compiler also supports C23 (which it may not),
and attempts to use `-std=gnu23`. If the host compiler
(e.g., GCC 12 on GitLab CI) is older, the build crashes.
To fix this without heavily patching APR's m4 macros, we explicitly
disable the C23 standard detection for the host compiler in APR_CONF_ENV
when GCC<14. Since APR is a mature project that does not require C23
features, preventing its use here is a safe and robust workaround.
Doing so will not disable C23 for the target build if the target compiler
is GCC 14+; it will only prevent the host compiler from using it when
building APR's tools; according to the build logs, ac_cv_prog_cc_c23
will be set to "no" for the target compiler if it does not support C23,
and will be set to "-std=gnu23" if it does.
It's important to note that this error could also occur with other
packages that use autotools-package if "AUTORECONF" is set to "yes".
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/15112315884
[1] https://gcc.gnu.org/cgit/gcc/commit/?id=fad61bf73b3158157a136bf4d9373fc3d9afe319
[2] https://autobuild.buildroot.org/results/d7d/d7d2703e42034d9c11de89b2b3b6cf401f677aa3
Signed-off-by: Dowan Gullient <dowan.gullient@smile.fr>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Changes with nginx 1.30.3
*) Security: a heap memory buffer overflow might occur in a worker
process when using a configuration with "ignore_invalid_headers off;"
and "large_client_header_buffers" with large configured values when
proxying a specially crafted request to HTTP/2 or gRPC backend,
allowing an attacker to cause worker process memory corruption or
segmentation fault in a worker process (CVE-2026-42055).
Thanks to Mufeed VH of Winfunc Research.
*) Security: a heap memory buffer overread might occur in a worker
process while handling a specially sent response with decoding from
UTF-8 via the "charset_map" directive, allowing an attacker to cause
a limited disclosure of worker process memory or segmentation fault
in a worker process (CVE-2026-48142).
Thanks to Han Yan of Xiaomi and p4p3r of CYBERONE.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
See here for a complete Changelog:
https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-22-current.html
Security Fixes:
GHSA-3g56-cgrh-95p5: chan_unistim DIALPAGE digit handling can overflow phone_number and crash Asterisk
GHSA-3rhj-hhw7-m6fw: NULL Pointer Dereference in HTTP AMI Digest Authentication
GHSA-4pgv-j3mr-3rcp: Reflected XSS in Phone Provisioning HTTP Error Pages
GHSA-589g-qgf8-m6mx: Stack buffer overflow in MWI NOTIFY Message-Account parsing
GHSA-746q-794h-cc7f: Out-of-Bounds Read in Q.931 Information Element Parser (H.323 Addon)
GHSA-8jhw-m2hg-vp3h: Heap Buffer Overflow in OGG/Speex File Playback (format_ogg_speex)
GHSA-8jw3-ccr9-xrmf: Buffer over-read in Asterisk PJSIP MWI body parser
GHSA-g8q2-p36q-94f6: Heap-use-after-free in Asterisk PJSIP TCP/SDP handling when TCP connection closes during SDP processing
GHSA-h5hv-jmgj-92q2: CVE-2022-37325 fix is absent from current chan_ooh323 Q.931 party-number parser
GHSA-j2mm-57pq-jh94: Possible RED T.140 Generation Accumulation OOB Write
GHSA-mxgm-8c6f-5p8f: Stack buffer overflow in res_xmpp XMPP namespace prefix handling
GHSA-ph27-3m5q-mj5m: SQL Injection in cel_pgsql and cel_tds via CELGenUserEvent eventtype Field
GHSA-q9fr-m7g8-6ph5: Asterisk app_sms.c copies externally controlled SMS lengths into fixed in-struct buffers
GHSA-qf8j-jp7h-c5hx: Out-of-Bounds Write in Codec2 Decoder Due to Floor/Ceil Sample Count Mismatch
GHSA-r6c2-hwc2-j4mp: LDAP Filter Injection in res_config_ldap via SIP Username (Unauthenticated Information Disclosure)
GHSA-vfhr-r9x9-c687: Possible RED T.140 Heap Buffer Overflow
GHSA-vrfp-mg3q-3959: ARI setChannelVar bypasses live_dangerously and permits FILE() writes
GHSA-wcvv-g26m-wx5c: ARI REST-over-WebSocket read-only bypass allows arbitrary module path load and conditional RCE
GHSA-x348-j6c9-77f3: Stack Buffer Overflow in H.323 ooTrace() via Unbounded vsprintf into Fixed 2048-byte Buffer
GHSA-xgj6-2gc5-5x9c: ast_loggrabber executes python script in world writable directory(/tmp) leading to potential privilege escalation And RCE
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Agec is a simple file encryption tool that implements the
age format in C with minimal dependencies. The tool supports
asymmetric encryption based on X25519, and a passphrase
encryption based on scrypt.
https://git.sr.ht/~min/agechttps://age-encryption.org
Encryption is silently broken for files <35 bytes, so add a patch submitted
upstream to fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For more information on the release, see:
- https://mariadb.com/docs/release-notes/community-server/10.11/10.11.18
It fixes the following vulnerabilities:
- CVE-2026-48163:
MariaDB server is a community developed fork of MySQL server. From
versions 10.6.1 to before 10.6.27, 10.11.1 to before 10.11.18, 11.4.1
to before 11.4.12, 11.8.1 to before 11.8.8, and 12.3.1, during the SST
the donor node is interpolating parameters that the joiner sent into
the command line. Not all parameters were properly validated which
could allow a malicious joiner to execute arbitrary shell commands on
the donor side via the rsync SST method. This issue has been patched
in versions 10.6.27, 10.11.18, 11.4.12, 11.8.8, and 12.3.2.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-48163
- CVE-2026-48165:
MariaDB server is a community developed fork of MySQL server. From
versions 10.6.1 to before 10.6.27, 10.11.1 to before 10.11.18, 11.4.1
to before 11.4.12, 11.8.1 to before 11.8.8, and 12.3.1, a high-
privileged MariaDB user could've used wsrep_sst_receive_address or
wsrep_sst_donor global system variables to execute shell commands as
the uid of the mariadbd process on the galera joiner node. This issue
has been patched in versions 10.6.27, 10.11.18, 11.4.12, 11.8.8, and
12.3.2.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-48165
- CVE-2026-49261:
MariaDB server is a community developed fork of MySQL server. Versions
10.6.1 through 10.6.26, 10.11.1 through 10.11.17, 11.4.1 through
11.4.11, 11.8.1 through 11.8.7, and 12.3.1 with `wsrep_notify_cmd`
enabled would execute shell commands embedded in the name of the
joiner node. This is fixed in 10.6.27, 10.11.18, 11.4.12, 11.8.8, and
12.3.2. As a workaround, anyone who cannot upgrade now should disable
`wsrep_notify_cmd`.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-49261
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
In the precedent patch "support/testing: test_gnupg2.py: use
assertRunNotOk()" [1] a small typo (OK instead of Ok) was introduced
in the test_gnupg2.py file, which caused a runtime failure.
This patch simply replace "self.assertRunNotOK(cmd)" with
"self.assertRunNotOk(cmd)" to correct this typo.
[1] cb791850ad
Signed-off-by: Dowan Gullient <dowan.gullient@smile.fr>
[Fiona: fix commit message formatting]
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
- CVE-2026-55200:
libssh2 through 1.11.1, fixed in commit 97acf3df contains an out-of-
bounds write vulnerability in ssh2_transport_read() that fails to
enforce upper bounds on packet_length field. Remote attackers can send
crafted SSH packets with excessively large packet_length values to
corrupt heap memory and achieve remote code execution.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-55200
- 97acf3dfda
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Fixes the following vulnerability:
- CVE-2026-55199:
libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-
authentication denial of service vulnerability in the SSH_MSG_EXT_INFO
handler in src/packet.c that allows a malicious SSH server to cause a
client CPU exhaustion loop by sending a crafted extension count value.
A malicious server can set nr_extensions to 0xFFFFFFFF during key
exchange, causing the client to spin in a tight CPU loop for over 60
seconds because return values from _libssh2_get_string() are unchecked
and the session timeout does not apply to CPU-bound loops.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-55199
- 17626857d2
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
- CVE-2026-6192:
A vulnerability was identified in uclouvain openjpeg up to 2.5.4. This
impacts the function opj_pi_initialise_encode in the library
src/lib/openjp2/pi.c. The manipulation leads to integer overflow. The
attack must be carried out locally. The exploit is publicly available
and might be used. The identifier of the patch is
839936aa33eb8899bbbd80fda02796bb65068951. It is suggested to install a
patch to address this issue.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-6192
- 839936aa33
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
The sample script would've passed even if the connections list was
empty. Check that there is at least one connection, and that the
sample script can read loopback device information.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The new test inherits from TestIptables, with only minimal changes to
use the nftables backend instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
In 11aa1cfa5a the patch was accidentally
moved into a versioned directory with the wrong version (2.82.0
instead of 2.82.4) and thus not applied. However, there have been no
issues reported.
The patch description mentions being needed to fix build errors in
package/atk and package/libnice. It was originally added in
b094f88a4d, and amended for libnice in
2c916b400b. package/atk was removed in
2c3ca7bea1, because atk has been merged
into at-spi2-core. Both at-spi2-core and libnice are Meson packages,
as was atk at the time of its removal.
Both current packages build with the following configuration (tested
using utils/test-pkg):
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_GOBJECT_INTROSPECTION=y
BR2_PACKAGE_LIBNICE=y
BR2_PACKAGE_AT_SPI2_CORE=y
Evidently the patch is no longer needed, presumably because the
correct search path for GIR files is set by other means, and we can
remove it instead of fixing the version number of the patch directory.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Tested-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
