As found out by Yann [1], binutils will use its bundled copy of zlib,
whether it is already provided by the system or not, and unless
explicitly told to use the system zlib with --with-system-zlib, which
is available since version 2.21 and
700d40ca16
This will fix the following build failure with oprofile when compiling
in a static configuration where zlib is not enabled:
checking for bfd_openr in -lbfd... no
checking for compress in -lz... no
configure: error: libz library not found; required by libbfd
As found out by Arnout [1], this fails infrequently because static is
already pretty rare, but in addition zlib is almost always selected by
some other package.
Fixes:
- http://autobuild.buildroot.org/results/0e1d16dfbb455a08db80ac5d35613908c3b4163f
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20211030214734.2154583-1-fontaine.fabrice@gmail.com/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- reword the explanations about the system zlib
- extend the oprofile example with static and !zlib
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a3c1ba68f4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't want to allow meson to download wrap dependencies as this
bypasses buildroot's dependency resolution.
This is badly documented in the meson manual, but there is at least
an FAQ that refers to it:
https://mesonbuild.com/FAQ.html#does-wrap-download-sources-behind-my-back
Meson has a option called wrap-mode which can be used to disable
wrap downloads altogether with --wrap-mode=nodownload.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add pointer to FAQ]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 12ba356365)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This option only exists in main and is not in a release.
Fixes:
output/build/weston-9.0.0/meson.build:1:0: ERROR: Unknown options: "launcher-libseat"
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0f1bce7b73)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dahdi-linux needs a linux with CRC CCITT since the addition of the
package in commit d959966b41 as stated in
the README:
- CONFIG_CRC_CCITT must be enabled ('y' or 'm'). On 2.6 kernels this can
be selected These can be selected from the "Library Routines" submenu
during kernel configuration via "make menuconfig".
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b22ec4bd95)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-40114: Multiple Cisco products are affected by a
vulnerability in the way the Snort detection engine processes ICMP
traffic that could allow an unauthenticated, remote attacker to cause a
denial of service (DoS) condition on an affected device. The
vulnerability is due to improper memory resource management while the
Snort detection engine is processing ICMP packets. An attacker could
exploit this vulnerability by sending a series of ICMP packets through
an affected device. A successful exploit could allow the attacker to
exhaust resources on the affected device, causing the device to reload.
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-snort-dos-s2R7W9UUhttps://www.snort.org/downloads/snort/changelog_2.9.18.1.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5afa2320ec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenJDK 17 is a new LTS release, which leaves the Buildroot Config option of
"LTS" and "LATEST" as a misnomer because both 11 and 17 are LTS releases.
There are two options in this case:
1) Remove "LATEST" and update OpenJDK 11 to 17, and only support 17.
2) Change "LTS" to "11" and "LATEST" to "17" and only support the latest 2 LTS
OpenJDK releases.
After some discussion with Thomas Petazzoni and Peter Korsgaard, and testing,
option 2 is the best course of action for a few reasons:
- OpenJDK 11 and 17 have very long support cycles:
- OpenJDK 11 has two years of Active and five years of security support left.
- OpenJDK 17 has five years of Active and ten years of security support left.
- Both OpenJDK versions build with the same parameters.
- The maintenance cost of both versions is meager.
- Both versions pass tests.package.test_openjdk without issue.
Changes:
- Change BR2_OPENJDK_VERSION_LATEST -> BR2_OPENJDK_VERSION_17
- Change BR2_OPENJDK_VERSION_LTS -> BR2_OPENJDK_VERSION_11
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Peter: add Config.in.legacy, use BR2_PACKAGE_OPENJDK_ prefix]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a610bf9967)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.16.10 (released 2021-11-04) includes security fixes to the archive/zip
and debug/macho packages, as well as bug fixes to the compiler, linker,
runtime, the misc/wasm directory, and to the net/http package.
https://golang.org/doc/devel/release#go1.16.minor
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Giulio Benetti to all Olimex Allwinner boards' defconfigs since I've
recently updated and tested them all and I'd like to receive possible
build failure from gitlab CI/CD.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1b31b4b9ce)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit
40bb37bd70 ("utils/getdeveloperlib.py:
use relative paths for files"), the Developer class was changed to use
relative paths, including for its .hasfile() method.
However the check_developers() function of getdeveloperlib.py was not
updated accordingly, and continued to pass absolute paths. This caused
"get-developers -c" to return the entire list of files in Buildroot as
being unmaintained, as none of them were matching the file listed in
the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 79cba4056b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Python 3.x, check_output() returns a "bytes" array, and not a
string. Its result needs to be decoded to be turned into a
string. Without this fix, "get-developers -c" bails out with:
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./utils/get-developers", line 105, in <module>
__main__()
File "/home/thomas/projets/buildroot/./utils/get-developers", line 53, in __main__
files = getdeveloperlib.check_developers(devs)
File "/home/thomas/projets/buildroot/utils/getdeveloperlib.py", line 280, in check_developers
files = subprocess.check_output(cmd).strip().split("\n")
TypeError: a bytes-like object is required, not 'str'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 53da6a7c05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
