Since version v239, systemd-nspawn unconditioanlly uses prlimit(2),
which is not implemented in uClibc-ng. systemd-nspawn can not be
disabled.
This makes systemd glibc-only again.
After a bit of discussion with upstream (om IRC), it looks very
improbable that they accept a patch making systemd-nspawn optional.
They would probably consider a patch that provides that syscall wrapper
if it is missing, though, but that's less trivial...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, tar will not include any extended attribute (xattr) when
creating archives, and thus will not store capabilties either (as they
are stored in the xattr 'security.capability').
Using option --xattrs is enough to create a tarball with all the xattrs
attached to a file. However, extracting all xattrs from a tarball
requires that --xattrs-include='*' be used. This is not symetric (but on
purpose, as per the documentation), and so is confusing to some.
So, we use --xattrs-include='*' to create the archive, so as to be
explicit that we want all xattrs to be stored.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 4adaa581b2, S29netplug looks for
/etc/default/network instead of /etc/sysconfig/network. When this
file exists but does not define $NETWORKING, the script fails on line
29 with something like:
/etc/init.d/S29netplug: 29: [: =: unexpected operator
Fix quoting so this error no longer happens.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
[Thomas: keep double quotes around "no", keep curly braces when
referencing the variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/e29/e293aadc692d2ed337881ef2172ddf66a60bc05c/
And many more.
Install as 'host-make' rather than just 'make', as that otherwise confuses a
number of packages when they invoke recursive / sub-make. The internal job
control logic of GNU make is version dependant, so mixing versions may lead
to issues like:
make[1]: Entering directory `/home/peko/autobuild/instance-0/output/build/boa-0.94.14rc21'
(cd src && make -w --jobserver-fds=5,6 -j)
make: unrecognized option '--jobserver-fds=5,6'
With this rename, only packages explicitly opting in for our host-make
(using the BR2_MAKE / BR2_MAKE_HOST_DEPENDENCY logic) will use it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script contains logic to figure out what make program to
invoke for subdirectories (trying gnumake, gmake, make). Explicitly force
it to use our BR2_MAKE to ensure the right make version is used.
As GLIBC_CONF_ENV is only initialized below, move this section below it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commands like "make show-build-order" or "make
<package>-show-build-order" show the build order and then print
"make[1]: Nothing to be done for 'show-build-order'" to stdout. It
pollutes output. Technically this message is true but it's not true
for user because he gets an information.
The <package>-show-build-order targets use $(info) for package name
printing. The make utility doesn't consider the internal directive as
a command so it think that it's "Nothing to be done". The patch adds
the empty command to <package>-show-build-order to inform make utility
that taget makes some real actions.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: invert $(info) and @:, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since bumping luv from version 1.9.1 to 1.22.0, building luvi fails, as
"luv.h" now includes "compat-5.3.h", which is locally shipped as a
dependency to lua-compat-5.3.
Fixing the issue reveals, that luvi is using `luaL_newlib` which is not
available in the Lua 5.1 API. Building luvi with luv 1.9.1 was not an
issue before, because luv 1.9.1 defined `luaL_newlib` in luv.h, which
was removed in 1.22.0 in favour of using lua-compat-5.3.
Therefore, add a patch which defines `luaL_newlib` in luvi.h.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch 0007-Disable-DES-authentification-support.patch has been
renamed to 0005-Disable-DES-authentification-support.patch.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit e7af4033c3 ("rpm: use the new
gettext logic") introduced a really nasty bug: by adding
$(TARGET_NLS_DEPENDENCIES) to RPM_DEPENDENCIES, it completely
overwrote the existing value of RPM_DEPENDENCIES, entirely masking all
mandatory RPM dependencies.
rpm is fairly towards the end of the alphabet, and most other
mandatory dependencies (berkeleydb, host-pkgconf, file and popt)
appear earlier by alphabetic ordering. Only zlib was afterwards, but
since file depends on zlib, it was always built before. This probably
explains why our autobuilders haven't encountered a single build
failure.
However, a simple "make rpm" clearly exhibits the failure, and
obviously the upcoming per-package folder mechanism makes such bugs
even more obvious.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bump to 79e9798eee9cd972d92ed2b18f170de856d153c9 added the new ufb
daemon through the following commit:
ce808f3010
So install ufb on target
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since glibc 2.28
(https://savannah.gnu.org/forum/forum.php?forum_id=9205), the obsolete
functions encrypt, encrypt_r, setkey, setkey_r, cbc_crypt, ecb_crypt,
and des_setparity are no longer available to newly linked binaries, and
the headers <rpc/des_crypt.h> and <rpc/rpc_des.h> are no longer
installed. These functions encrypted and decrypted data with the DES
block cipher, which is no longer considered secure. Software that still
uses these functions should switch to a modern cryptography library,
such as libgcrypt.
So add a NO_CRYPT variable to disable test/crypt
Fixes:
- http://autobuild.buildroot.org/results/158438debb0ce313b012b871e199bed42ba38294
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When $(TOPDIR)/dl is a symlink, checking out git submodules can fail,
as reported by Michael in #11086.
To reproduce a similarly-related mis-behaviour:
$ mkdir -p foo/bar foo/buz
$ cd foo/bar
$ ln -s ../buz meh
$ cd meh
$ cd ../../foo
The last command should not succeed, because, relative to meh, there is
no ../../foo directory; we would expect it to be ../../../foo, instead.
But since meh is a symlink to a directory, then a relative path from that
symlink is interpreted as relative to the derefrenced directory, i.e.
from buz in this case.
But where this gets even weirder, is that, if the last command is
replaced by:
$ cd ../../../foo
then it still works, too.
And that is the root of Michael's issue: the dl directory in Buildroot's
TOPDIR is a symlink to a similarly-named directory one directory higher,
which then confuses relative paths, which gets especially and noticeably
bad for git submodules.
Avoid this strangeness, and just use so-called "physical" path, i.e. a
path where all symlinks to directories have been dereferenced.
Fixes: #11086
Reported-by: Michael Nosthoff <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Michael Nosthoff <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The command "make show-build-order" doesn't show dependencies of rootfs-common target.
This patch adds $(ROOTFS_COMMON_DEPENDENCIES) to PACKAGES variable.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When adding the custom BR2_WGET value in the configuration,
genrandconfig forgets to add a newline. Due to this, the next option
that is added is printed on the same line as BR2_WGET="", which causes
it to be ignored.
Due to this, in all builds, the line right after BR2_WGET was
ignored. It could have been BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX,
BR2_INIT_SYSTEMD, BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV,
BR2_STATIC_LIBS or BR2_PACKAGE_PYTHON_PY_ONLY depending on the
randomization.
Fix that by adding a proper newline at the end of the BR2_WGET option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure.ac script uses PKG_CHECK_MODULES(), and we autoreconf
the package, so host-pkgconf should be listed in the dependencies.
This issue is seen either with per-package folders, or by doing a
clean build with just "make openocd":
>>> openocd 0.10.0 Configuring
>>> openocd 0.10.0 Autoreconfiguring
[...]
configure.ac:12: error: possibly undefined macro: AC_MSG_WARN
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:201: error: possibly undefined macro: AC_DEFINE
configure.ac:582: error: possibly undefined macro: AC_MSG_NOTICE
Even if the message seems unrelated, it's really the lack of pkg.m4
from host-pkgconf that causes the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libassuan library installs libassuan-config, but it is not
currently fixed up by our <pkg>_CONFIG_SCRIPTS logic. While this
doesn't cause any problem today, it fails badly with per-package
folders, so let's use <pkg>_CONFIG_SCRIPTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- changes since 1.16.1
0f68a3f6 configure: build without BPF support in ir-keytable
5f8bd4e8 keytable: fix compilation warning
f735bee7 keytable: fix BPF protocol compilation on mips
c393c3bc Prepare for 1.16.2 release
- use new '--disable-bpf' option instead of ac_cv_prog_CLANG
to disable BPF support, fixes [1]:
bpf.c:48:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
- remove upstream denied patch (see [2]) fixing part of the BPF support
for older toolchains
[1] http://autobuild.buildroot.net/results/32b8f63e84616f91b645230e889eb1518972a398
[2] https://www.spinics.net/lists/linux-media/msg142729.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When /etc/selinux/semanage.conf does not exist, libsemanage tries to
overwrite it. For the target package, it works fine because $(DESTDIR)
is taken into account.
However, for the host package, $(DESTDIR) is empty, and the location
used for /etc/selinux/semanage.conf is not affected by $(PREFIX). This
causes host-libsemanage to try to install /etc/selinux/semanage.conf,
which obviously fails with:
test -f /etc/selinux/semanage.conf || install -m 644 -D semanage.conf /etc/selinux/semanage.conf
install: cannot create directory '/etc/selinux': Permission denied
To fix this, this commit passes DEFAULT_SEMANAGE_CONF_LOCATION in the
make options when building/installing host-libsemanage, providing a
path to semanage.conf that Buildroot can write to.
Fixes:
http://autobuild.buildroot.net/results/cd27e3c66274622d0c3dd5a601a36efb1bc45011/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The xlib_libfontenc configure.ac uses PKG_CHECK_MODULES(), but the
Buildroot package does not have a dependency on host-pkgconf. This
causes a build failure with per-package host/target folders, or if one
builds just with "make xlib_libfontenc", which is why it was never
detected by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-16062: dwarf_getaranges in dwarf_getaranges.c in libdw in elfutils
before 2018-08-18 allows remote attackers to cause a denial of service
(heap-based buffer over-read) via a crafted file.
CVE-2018-16402: libelf/elf_end.c in elfutils 0.173 allows remote attackers
to cause a denial of service (double free and application crash) or possibly
have unspecified other impact because it tries to decompress twice.
CVE-2018-16403: libdw in elfutils 0.173 checks the end of the attributes
list incorrectly in dwarf_getabbrev in dwarf_getabbrev.c and dwarf_hasattr
in dwarf_hasattr.c, leading to a heap-based buffer over-read and an
application crash.
For more details, see the announcement:
https://sourceware.org/ml/elfutils-devel/2018-q3/msg00116.html
0.172 and 0.173 also included fixes for crashes and hangs found by afl-fuzz
(no CVEs assigned):
https://sourceware.org/ml/elfutils-devel/2018-q2/msg00272.htmlhttps://sourceware.org/ml/elfutils-devel/2018-q2/msg00209.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2018-12384: NSS responded to an SSLv2-compatible ClientHello with a
ServerHello that had an all-zero random.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
