Update U-Boot to fix the following error when building with
python-setuptools >= 69, that is, since 6b62384e3d
("package/python-setuptools: bump to version 69.0.3"):
packaging.version.InvalidVersion: Invalid version: 'u-boot-2019.01'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:27: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:434: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:434: scripts/dtc] Error 2
make[2]: *** [Makefile:508: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:289: output/build/uboot-2019.01/.stamp_built] Error 2
make: *** [Makefile:83: _all] Error 2
Use SPL and U-Boot FIT image combined into u-boot-sunxi-with-spl.bin.
Do not use the optional System Control Processor (SCP) firmware pointing
the SCP env variable to /dev/null.
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable DHCP for eth0.
This is perfectly fine even for users that are not using the Ethernet
on the rock5b, as in that case, udhcpc will simply fork to background
without delaying the boot.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This board has an optional eMMC module.
Use PARTLABEL to specify the rootfs, as this works regardless of the mmc
device probe order.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Partition table hybrid means GPT + MBR.
There is no need to keep the MBR when using GPT, so migrate to GPT only.
This change also requires us to migrate from partition-type to
partition-type-uuid, otherwise genimage won't generate an image.
Note that GPT itself always writes a "protective MBR" at LBA 0.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Just a simple clone and pull with --depth 1 should be enough to parse
the CVE data and generate the pkg-stats report.
From a full clone and a depth-1 clone, and the size delta is 2.9GiB
vs. 2.2GiB.
The download size does change: from 983.55MiB down to 270.78MiB.
It's a net time win too: 2m17s vs 1min7s (on a 100Mbps link).
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit switches the gobject-introspection package from using
prelink-cross to simply using "objdump -p". This basically implements
the same change as was done in OpenEmbedded commit:
https://git.openembedded.org/openembedded-core/commit/?id=767e0880d4d729e659e859dd99c1cdb084b8ba51
In particular, this allows to get rid of the architecture dependency
of prelink-cross, which wasn't currently encoded, but that was
actually causing failures such as:
/home/autobuild/autobuild/instance-17/output-1/host/sbin/prelink-rtld: error while loading shared libraries: /lib/libc.so.6: cannot handle TLS data
It also paves the way for removing host-prelink-cross entirely, as the
only remaining user of it now is dracut.
The test tests.package.test_python_gobject.TestPythonPy3Gobject (which
uses gobject-introspection) has been tested to run fine after this
commit.
Fixes:
http://autobuild.buildroot.net/results/7efa6a18f543752dfe33577f74c20bda3f8b1e65/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add the proper firmware to avoid the following warning + error during
boot:
r8169 0004:41:00.0: Direct firmware load for rtl_nic/rtl8125b-2.fw failed with error -2
r8169 0004:41:00.0: Unable to load firmware rtl_nic/rtl8125b-2.fw (-2)
Note that the NIC appears functional even without the proper firmware.
However, add the firmware anyway, since the error messages are distracting
and clutters dmesg.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Do not let the kernel mount the rootfs as rw.
There is no need for this, and init will remount the rootfs as rw anyway.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ext4 rootfs is mounted as ext4 perfectly fine without rootfstype
specified on the kernel command line.
In order to keep the kernel command line clean, remove the superfluous
kernel parameter.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest 9.x version. Protobuf is now mandatory.
The COPYING file has evolved to expose more details: the respective
licenses are now listed, except for the GPLv3 license. The GPLv3
license is only required when FRR is compiled with the GCC plugin that
extends printf type checks. This plugin should not be enabled for
production code. For more information, see FRR's workflow.rst
document.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to U-Boot 2024.07 and kernel 6.10.6 versions.
As kernel 6.10 fixes the USB kernel hang, remove the original patch.
Also convert it to use extlinux.conf file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new version from peter@digitalbrains.com adds some few new
features (name, offset, etc.) and it includes a few improvements.
The former version was more than 14y old.
There is no tag, neither any archive, so currently we use the latest
git commit.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enabling the option correctly select the python-curses module dependency
of the viewer tool.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
