We add -Wno-error to not error out on warnings, which would otherwise
cause build failures.
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: as suggested by Baruch, use -Wno-error instead of disabling
specific warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure script check whether the underlying libc provides for
native obstack support, only building Xenomai replacement code if not.
This as been tested against uClibc 1.0.22, and common glibc releases.
Backport the patch provided by uptream.
Add XENOMAI_AUTORECONF=YES since the patch modify configure.ac.
[1] http://xenomai.org/pipermail/xenomai/2017-April/037272.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bug discovered while packaging supertux is now fixed by the previous
patch but the issue can still be present in other C++11 package if
-std=c++11 is used on PPC with Altivec vectorization.
This reverts commit d2903aaf13.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is just too
small for at91sam9x5ek_mmc_dev_defconfig, which has a lot of extra
packages for development.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Only 65MB is used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for firefly_rk3288_demo_defconfig. Indeed, the ext2 filesystem contains
the mali blob (90MB) and Qt5 (14MB), totalling to 125MB.
This is a bit too small to fit comfortably on a 128M flash driver, so
increase the size to 250000K (245MB).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for pc_x86_64_bios_defconfig. Indeed, the ext2 filesystem contains the
kernel (4MB), the wireless modules (4MB), all firmware for wireless
modules (40MB), and the wifi userspace (9MB) and the udev hwdb (5MB)
which brings the total to 70MB.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As per section 12.2 "Complying with the Buildroot license", Buildroot
is released under GPL version 2 or (at your option) any later version.
But SPDX license string for Buildroot license in section 21.5
"Submitting patches" refers to only GPL version 2. Fix this
inconsistency by using correct SPDX identifier.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses package installs a full version of clear and reset(tset)
tools. Preserve these by disabling the options in the busybox config
file. This removes the need for ncurses to depend on busybox for solely
ordering of target install.
This commit resolves the following python circular dependency with python.
busybox -> libselinux -> python3 -> ncurses -> busybox
Fixes:
http://autobuild.buildroot.net/results/db1/db1e6f3054092fc5576ccab8e04a3b9d74ca9a8c/
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The trinity configure script looks into a host header to check for libc/kernel
headers conflict resolution. This is not compatible with cross compilation.
Add a patch that does direct compilation test instead.
This issue was not caught by the autobuilder yet.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When debugging hidden dependencies, the build order is very important.
Most notably, it is interesting to identify potential culprits.
Add a new top-level rule, show-biuld-order, that dumps all the packages
in the order they would get built.
Note that there are a few differences with show-targets:
- more packages are reported, becasue show-targets does not report
host packages that have no prompt;
- the output is line-based, because we're using $(info $(1)); getting
a single output line like show-targets would require we use an
actual command, like printf '%s ' $(1); but that takes a lot of
time, while $(info $(1)) is almost instantaneous (the time to parse
the Makefiles);
- rootfs targets are not reported.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for atest application, which is useful for testing
alsa kernel drivers and detecting if playback/capture work correct
without artifacts, such as channel swap.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: add missing Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for libgphoto2 core library designed to allow access to
digital camera.
Signed-off-by: Kevin JOLY <kevin.joly@sensefly.com>
Cc: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Use downloads.sourceforge.net
- Remove final dot at end of <pkg>_LICENSE variable
- Minor tweaks in comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use two official kernel patches to add support for gcc 5:
commit 71458cfc782eafe4b27656e078d379a34e472adf
kernel: add support for gcc 5
commit aeea3592a13bf12861943e44fc48f1f270941f8d
ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
