Fixes the following security issues:
- Parse the chunk-size with a dedicated function and reject "unreasonably"
large values to prevent silent truncation by sscanf(), integer overflows
and misinterpretation of the content later on. Heap buffer overflows on
platforms with 32-bit pointers were alleged as well.
Commit 5b3bb22b77. OVE-20260515-0002. Reported by @TristanInSec.
- ssl_send_certificate_error(): Store the generated message on the heap
instead of the stack to prevent an alleged segmentation fault if there
are enough certificates in the chain to exceed the stack size.
While at it, replace another variable-length array that was probably
unproblematic with a heap-based buffer as well.
Commit 4963aa4f08. OVE-20260515-0001. Reported by @TristanInSec.
https://www.privoxy.org/gitweb/?p=privoxy.git;a=blob;f=ChangeLog;h=d62aa6bf0b2cb26100e4ba8e528638259502711d;hb=0c5225b6844dd1a838b80d09d715a6c4ccbda2c6
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Peter: add vulnerability info]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 283a7a15b2)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This commit fixes the following vulnerability:
- CVE-2026-7598:
A security vulnerability has been detected in libssh2 up to 1.11.1.
The impacted element is the function userauth_password of the file
src/userauth.c. Such manipulation of the argument
username_len/password_len leads to integer overflow. The attack may be
launched remotely. The name of the patch is
256d04b60d80bf1190e96b0ad1e91b2174d744b1. A patch should be applied to
remediate this issue.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-7598
- 256d04b60d
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 061d6b121b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
defconfigs are very unlikely to successfully build on a small runner
because they build a kernel (and often a toolchain). They're also likely
to benefit a lot from the additional parallelism on larger runners.
For now, always build them on large runners. There may be some for which
even the large runners don't have sufficient disk space or memory, but
we'll solve that when it happens.
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit f93dbfca13)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since the ARM AArch64 toolchain toolchain bump [1], the TestPppd fail
at runtime since ttyppp0 and ttyppp1 interfaces were not created
properly:
pppd[87]: pppd 2.5.2 started by root, uid 0
pppd[87]: Baud rate for /dev/ttyppp1 is 0; need explicit baud rate
The new toolchain uses glibc 2.42 that include a rework in termios
"implement arbitrary and split speeds in termios" to support BOTHER
[2]. This rework seems to conflict with pppd workaround [3] introduced
when BOTHER was not supported in Glibc.
Fix this by setting the baudrate on pppd command line (we already set
this baudrate on socat command line).
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/14607335920 (TestPppd)
[1] 8d413d6179
[2] https://sourceware.org/git/?p=glibc.git;a=commit;h=5cf101a85aae0d703cdd8ed7b25fe288e41fdacb
[3] d65f6713c8
Fix-suggested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 50d772b66b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
We have our own GitLab-CI runner, but with only one we can't run many
jobs in parallel so it takes a very long time before all the tests have
completed. In addition, if that runner goes down, we have nothing at
all.
GitLab offers the following machine types for hosted runners on Linux
x86-64 [1]. The default is the "small" runner. Using a larger runner
increases the "Cost factor" [2].
For opensource projects, the Cost factor is reduced to 0.5 (1 minute per
2 minutes of job time) whatever the runner type.
Runner Tag vCPUs Memory Storage Cost factor (OSS)
saas-linux-small-amd64 (default) 2 8 GB 30 GB 1 (0.5)
saas-linux-medium-amd64 4 16 GB 50 GB 2 (0.5)
saas-linux-large-amd64 (Premium and Ultimate only) 8 32 GB 100 GB 3 (0.5)
saas-linux-xlarge-amd64 (Premium and Ultimate only) 16 64 GB 200 GB 6 (0.5)
saas-linux-2xlarge-amd64 (Premium and Ultimate only) 32 128 GB 200 GB 12 (0.5)
Compute minutes consumed by a job is calculated by:
Job duration / 60 * Cost factor
(Job duration: The time, in seconds, that a job took to run, not
including time spent in the created or pending statuses.)
Thanks to the GitLab OSS program [3], Buildroot benefits from a free
Ultimate subscription and can use GitLab shared runners tagged with
saas-linux-{large, xlarge, 2xlarge}-amd64. In addition, we receive
50,000 free runner minutes per month.
In order to use one of those tags in Buildroot GitLab-CI jobs, we have
to classify all tests by resource requirement, to make sure the job
doesn't fail because it times out or has insufficient memory or disk
space. While we usually shouldn't use the largest runner for
everything, we can use larger runner without cost penalty thanks to
the cost factor reduced to 0.5 for opensource projects. This will
reduce the CI minutes consumed by a CPU intensive job.
First we introduce some new templates used to add the corresponding
runner tag to a runtime test job (reusing the GitLab terminology).
.runner-{small,medium,large,xlarge,2xlarge}
Most of our tests are fast (checkpackage, test_external_bootlin...), so
saas-linux-small-amd64 runner tag is enough. Default to this tag if
nothing else is specified.
Add a comment next to the test class to provide the runner tag.
This runner tag is retrieved when generating the
generated-gitlab-ci.yml file used to create the child pipeline where
the runtime test jobs are executed.
We use the list of runtime tests returned by node2:
"tests.boot.test_edk2.TestEdk2.test_run"
We convert each element of this list to get the path to the test source
file and the name of the test:
"support/testing/tests/boot/test_edk2.py"
TestEdk2
With that, we can grep into the test source file to retrieve the runner
tag placed one line above the test class:
# GitLab-runner: large
class TestEdk2(infra.basetest.BRTest):
Once the runner tag is retrieved, it's used to use the corresponding
runner template to the runtime test job:
tests.boot.test_edk2.TestEdk2.test_run: { extends: [ .runtime_test_base, .runner-large ]}
GitLab runners hosted by the Buildroot project should be able to run
any jobs, so they should be tagged with Gitlab runner tags
(saas-linux-{small,medium,large,xlarge,2xlarge}-amd64).
A specific runner tag "buildroot-runner" can be used to allow running
a job only on such runners.
If a test can't be executed by any shared GitLab-CI runners, we have
to use a runner owned by the Buildroot project. In this case we have
to use a specific template ".runner-buildroot-runner-only" in order to
add the specific runner tag "buildroot-runner" to the job running the
test. There is no such runtime test at the moment.
The proposed classification is based on a previous pipeline analysis
[5]:
- Tests lasting more than 3 hours will use 2xlarge runners.
- Tests lasting more than 2 hours will use xlarge runners.
- Tests lasting more than 1 hours will use large runners.
- Tests building a kernel or a toolchain will use medium runners.
- All other tests will use small runners when possible.
CI minute cost estimate:
tests.package.test_clang.TestClangCompilerRT.test_run lasts 4h25 on the
Buildroot runner. If we this duration for 2xlarge runners, the CI
minute consumed would be:
(15900 / 60) * 0.5 = 133
With 6 jobs using a 2xlarge runners we used ~795 CI minutes.
tests.package.test_kmscube.TestKmsCube.test_run list 2h04 on the
Buildroot runner. If we this duration for xlarge runners, the CI
minute consumed would be:
(7440 / 60) * 0.5 = 62
With 4 jobs using a xlarge runners we used ~248 CI minutes.
tests.package.test_weston.TestWeston.test_run last 1h15 on th
Buildroot runner. If we this duration for large runners, the CI
minute consumed would be:
(4500 / 60) * 0.5 = 37.5
With 28 jobs using a large runners we used ~1050 CI minutes.
tests.package.test_gstreamer1.TestGstreamer1.test_run last 46min on the
Buildroot runner. If we this duration for large runners, the CI
minute consumed would be:
(2760 / 60) * 0.5 = 23
With 31 jobs using a medium runners we used ~713 CI minutes.
tests.package.test_python.TestPython3Py.test_run last 13min on the
Buildroot runner. If we this duration for large runners, the CI
minute consumed would be:
(780 / 60) * 0.5 = 6.5
With 691 jobs using a medium runners we used ~4491 CI minutes.
In total, one pipeline for the runtime tests cost ~7297 CI minutes.
After a first try [6], we are actually using 8000 CI minutes per
pipeline.
We run such pipeline once a week (on Monday), one for each Buildroot
releases every 3 month, one for each stable and LTS release per month,
and one for each release candidate (3).
Worst case (release month):
(4 weeks + 1 release + 1 stable + 1 LTS + 3 release candidate) * 8000 CI
minutes: 80000 CI minutes / 50000.
So we would spend the minutes very quickly in the worst case scenario.
We have to keep one pipeline under 5000 CI minutes.
[1] https://docs.gitlab.com/ci/runners/hosted_runners/linux/#machine-types-available-for-linux---x86-64
[2] https://docs.gitlab.com/ci/pipelines/compute_minutes/#cost-factorshttps://docs.gitlab.com/ci/pipelines/compute_minutes/#compute-usage-calculationhttps://docs.gitlab.com/ci/pipelines/compute_minutes/#cost-factors-of-hosted-runners-for-gitlabcom
[3] https://gitlab.com/buildroot.org/gitlab-oss
[4] https://docs.gitlab.com/ci/runners/hosted_runners/#gitlabcom-hosted-runner-workflow
[5] https://gitlab.com/buildroot.org/buildroot/-/pipelines/2416603721
[6] https://gitlab.com/buildroot.org/buildroot/-/pipelines/2562421098
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Arnout:
- simplify parsing of test_file and test_name;
- match the entire test_name instead of substring;
- assume "small" by default;
- remove the "small" tags;
- use "gitlab-runner" instead of "Gitlab-runner".
]
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit c9df1b64b2)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Currently the weekly pipelines are triggered from a cron job on the
Buildroot server, so generate-gitlab-ci-yml filters on the "trigger"
source. However, we'd like to schedule it on gitlab itself, which makes
managing it easier.
We could filter on "schedule" in addition to "trigger", but there's not
really a reason to. We can simply rely on the BR_SCHEDULE_JOBS variable
- if it is set, we use its information.
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit c0922004d8)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes a build error
output/per-package/sane-airscan/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/14.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld:
libsane-airscan.so.1.p/airscan-http.c.o: in function `http_data_ref':
airscan-http.c:(.text+0x1c88): undefined reference to `__sync_fetch_and_add_4'
output/per-package/sane-airscan/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/14.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld:
libsane-airscan.so.1.p/airscan-http.c.o: in function `http_data_unref':
airscan-http.c:(.text+0x1cd0): undefined reference to `__sync_sub_and_fetch_4'
output/per-package/sane-airscan/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/14.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld:
libsane-airscan.so.1.p/airscan-trace.c.o: in function `trace_ref':
airscan-trace.c:(.text+0x32c): undefined reference to `__sync_fetch_and_add_4'
output/per-package/sane-airscan/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/14.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld:
libsane-airscan.so.1.p/airscan-trace.c.o: in function `trace_unref':
airscan-trace.c:(.text+0x358): undefined reference to `__sync_sub_and_fetch_4'
with this defconfig
BR2_sparc=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_SPARCV8_UCLIBC_STABLE=y
BR2_PACKAGE_SANE_AIRSCAN=y
detected by the Gitlab pipelines while testing to bump of sane-backends
to 1.4.0 in this series.
The build error is caused by an upstream commit added in 2020 to version
0.99.14:
fccd8402a6
so a backport to LTS branches should be considered because the initial
version of the buildroot package was 0.99.33, added with commit
f78280bf26.
An autobuilder error was not recorded yet because it is masked by various
build errors of the sane-backends package which are resolved by its bump
to 1.4.0 in this series.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit b71b14793a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since this script is often used to bump kernel versions in multiple
Buildroot branches, it makes sense to simply commit changes directly
rather than letting the developer do it by hand.
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit fab50ed3b1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The 'show-info' output always the location relative to the Buildroot
root directory.
When running 'generate-cyclonedx' outside of the Buildroot root
directory the hash file locations are not correct. Only using the
'hash_file' variable coming from 'show-info' doesn't guarantee the
script to succeed.
Use the 'brpath' variable to correctly reference the absolute path.
Fixes: 1791b79422 utils/generate-cyclonedx: add hashes from .hash files to externalReferences
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 2df4f1d573)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes:
https://autobuild.buildroot.net/results/9f0f50858b2f41c306f172bf011a34d2c0ad65dc/
>>> zsh 5.9 Downloading
wget -nd -t 3 --no-check-certificate -O '/home/autobuild/autobuild/instance-42/output-1/build/.zsh-5.9.tar.xz.FpXHXy/output' 'http://www.zsh.org/pub/zsh-5.9.tar.xz'
URL transformed to HTTPS due to an HSTS policy
--2026-06-01 01:46:35-- https://www.zsh.org/pub/zsh-5.9.tar.xz
Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt'
Resolving www.zsh.org (www.zsh.org)... 94.142.241.90
Connecting to www.zsh.org (www.zsh.org)|94.142.241.90|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2026-06-01 01:46:36 ERROR 404: Not Found.
zsh-5.9.1 was released on 2026-05-31 and 5.9.0 release tarball moved under
old/, so update ZSH_SITE to match.
https://zsh.sourceforge.io/News/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 92cdec5a54)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
OpenCV probes the host compiler for LSX/LASX by trying to compile a
small test program with '-mlsx' / '-mlasx'. With Buildroot's toolchain
this probe succeeds even when the target CPU lacks the matching ISA
extension, and the resulting libraries then contain LSX/LASX
instructions. This causes SIGILL at runtime on, e.g., the LA264.
Map Buildroot's BR2_LOONGARCH_SIMD_* selection to OpenCV's
CPU_BASELINE / CPU_DISPATCH knobs:
BR2_LOONGARCH_SIMD_NONE -> no baseline, no dispatch
BR2_LOONGARCH_SIMD_LSX -> baseline = LSX, no dispatch
BR2_LOONGARCH_SIMD_LASX -> baseline = LSX, dispatch = LASX
The block is gated on BR2_loongarch64, so the existing auto detection
remains in effect for every other architecture.
Signed-off-by: Pengji Li <wjjsn@qq.com>
Reviewed-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit b9d10eed1f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since Buildroot commit 0e3ddc9dc8,
linux hash files are split between pre- and post-6.17.
With buildroot commit da01b7271a the
script was updated for the new situation but still needs to update the
version-numbered links to the directories with the correct hash files.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit bd633fe5b4)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Our CI uses "/builds/buildroot.org/buildroot" as build directory.
Unlikely the xfsprogs build system misbehave when a directory in
the path contain ".o".
While generating .ltdep, the sed command used to convert object file
(.o) to libtool object(.lo) replace buildroot.org by buildroot.lorg.
.ltdep: $(CFILES) $(HFILES)
$(Q)$(MAKEDEP) $(CFILES) | $(SED) -e 's,^\([^:]*\)\.o,\1.lo,' > .ltdep
Building libfrog
[CC] gen_crc32table
[GENERATE] crc32table.h
gmake[4]: *** No rule to make target '/builds/buildroot.lorg/buildroot/test-output/TestXfs/host/include/urcu.h', needed by 'avl64.lo'. Stop.
Update the sed command to avoid this effect.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/14607335648
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 0a9bc387b6)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commit cdd1c5ca55 bumped the
package from version 22.12.0 to 25.10.0 but forgot to change zlib into
a mandatory dependency. This is necessary due to upstream commit
7d87c7d2c6
since version 23.07.0.
Fixes:
https://autobuild.buildroot.net/results/85f/85fb6c2945101b8d4ee86dbc32700293e7b35a86/
CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:290 (message):
Could NOT find ZLIB (missing: ZLIB_LIBRARY ZLIB_INCLUDE_DIR)
Call Stack (most recent call first):
/usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:654 (_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake/Modules/FindZLIB.cmake:242 (find_package_handle_standard_args)
CMakeLists.txt:309 (find_package)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7a9486d7d6)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This is the file the original commit d889838098 ("package/pkg-generic.mk:
Remove Info documents dir entry") wanted to delete.
However, it only works for host packages. Target packages are (usually)
installed with prefix /usr, so the info dir is /usr/share/info. Simply
remove both of them, even if one of them only exists for host packages
and the other only for target packages.
Signed-off-by: John Ernberg <j@j-ernberg.se>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit e5a723f35d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The previous site went offline, the last entry dates back to April 2026:
https://web.archive.org/web/20260401000000*/http://www.auto.tuwien.ac.at/~mkoegler/pth/
Update _SITE to the bcusdk project which depends on libpthsem and stores
the original tarball. Update project URL to github mirror provided by the
linknx project which also depends on libpthsem.
Fixes download error:
ERROR: while checking hashes from package/libpthsem/libpthsem.hash
ERROR: pthsem_2.0.8.tar.gz has wrong sha256 hash:
ERROR: expected: 4024cafdd5d4bce2b1778a6be5491222c3f6e7ef1e43971264c451c0012c5c01
ERROR: got : 01d9027268f27aab3ca5c6c649a7f7a444db5bc889e496d80c8704e4e120346e
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Fixes:
https://autobuild.buildroot.net/results/0d9/0d9e957540d15302ac55bc5a2207db0c45279b37/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ec687c3b5c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
All Qt6 packages install their own SPDX SBOM in
$(TARGET_DIR)/usr/lib/qt6/sbom/. In the context of Buildroot having
such SBOMs on the target is not useful, and they take up some space,
so get rid of them.
We use a TARGET_FINALIZE_HOOKS (and not a POST_INSTALL_TARGET_HOOKS)
because it's not just qt6base that installs SBOMs, but all qt6
modules, so we want the cleanup to happen after they all got
installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 160ef0b27a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Using '$(Q)rm -rf' is not the typical thing we do in Buildroot, we
more commonly use '$(RM) -rf'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 45789c73b1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
iconv types are defined differently in glibc (as pointers) and uclibc
(as integers). With changes in GCC14, -Wint-conversion has now become
an error, which shed some light on the issue.
The actual fix for that problem is released in uclibc 1.0.58 [1].
However, because these type definitions are in toolchain headers,
this means that the toolchain used to build samba must also include
uclibc>=1.0.58 (either an external toolchain that includes the uclibc fix,
or a Buildroot toolchain after the uclibc fix is merged in Buildroot [2]).
Until then, provide a workaround for samba itself.
No autobuilder failure on this (yet). It can be reproduced with
> ./utils/test-pkg -p samba4 -T bootlin-armv5-uclibc
[1] 328e14e55f
[2] https://lore.kernel.org/buildroot/ahPrm_0gVDGw5B5-@waldemar-brodkorb.de/
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit e136494e91)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issue (in 2.8.10):
CVE-2026-35444: Heap buffer overflow READ via unchecked colormap index in
XCF loader
https://github.com/libsdl-org/SDL_image/security/advisories/GHSA-gq8w-x74c-h6p7
In addition, 2.8.12 includes a number of memory related bugfixes:
Fixed memory overflow with corrupt LBM image
Fixed crash when decoding an invalid XCF image
Fixed out of bound read in GIF decoder
Update hash of license file for change of copyright year with:
281b4ebcb0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7769710087)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit 53bb7eafb2 ("package/arm-trusted-firmware: add
ARM_TRUSTED_FIRMWARE_CPE_ID_*") added logic to set the cpe-id version from
the package version by dropping a v or lts- prefix, but it used subst
instead of patsubst - So it would replace "v" and "lts-" anywhere in the
version and not only in the beginning of it.
Change to patsubst to fix that.
E.G. with the following defconfig:
BR2_aarch64=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="version-with-v-or-lts-in-it"
before:
make printvars VARS=ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION
ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION=ersion-with--or-in-it
after:
make printvars VARS=ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION
ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION=ersion-with-v-or-lts-in-it
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit e60515bbf5)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Building Stellarium includes the download of external tarballs during
configure.
This fails with host-cmake during configure stage:
CMake Error at md4c-subbuild/md4c-populate-prefix/src/md4c-populate-stamp/download-md4c-populate.cmake:163 (message):
Each download failed!
error: downloading 'https://github.com/mity/md4c/archive/refs/tags/release-0.5.2.tar.gz' failed
status_code: 1
status_string: "Unsupported protocol"
log:
--- LOG BEGIN ---
Protocol "https" not supported
closing connection #-1
due to buildroot commit f87138339b which
disabled SSL support for host-cmake.
This patch uses _EXTRA_DOWNLOADS to provide these tarball to allow
offline builds.
No autobuilder error was recorded, the build error can be reproduced
with this defconfig:
BR2_x86_64=y
BR2_x86_corei7=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_CORE_I7_GLIBC_BLEEDING_EDGE=y
BR2_FORCE_HOST_BUILD=y
BR2_PACKAGE_STELLARIUM=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SOFTPIPE=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_XORG7=y
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 646ea396c1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
