Previously, the documentation only requested links to upstream commits
when backporting patches.
Based on a mailing list discussion [0], patches should, when possible
and when approriate, provide a link as evidence that the patch has been
submitted upstream.
The motivation is that hopefully the patch gets applied to upstream at
some point reducing the long term maintenance burden within Buildroot.
This also makes future patch review on subsequent package version bumps
more streamlined.
For patches that are unique to BR and do not apply to the upstream
repository, patches should have a comment explaining why they do not
apply upstream.
[0] https://lists.buildroot.org/pipermail/buildroot/2023-March/666000.html
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5b00b40a05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With introduction of vmap'ed stacks to ARM in Linux v5.18, stack
parameters can no longer be used for DMA. So pull the latest xradio
changes that fix the driver and make it work with vmap'ed stacks
in new kernels.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 53baedf912)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel versions prior to 3.4 did not have V4L2_CAP_DEVICE_CAPS and
compiling against such a kernel will fail.
This patch introduces a version check and makes eudev fall back to
v2cap.capabilities on these kernels.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8f646eb2a1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Cargo, it is quite typical for "build scripts" to be written in Rust
and therefore they need to be compiled as part of the overall build. In
cross-compilation, that means a mixed host and target build.
Unfortunately, by default Cargo makes no distinction between the
RUSTFLAGS used for the host and the target. There is, however, an
unstable feature to make this distinction [1][2].
We already have CARGO_TARGET_APPLIES_TO_HOST="false". This makes sure
that any configuration that we make for the target doesn't automatically
apply to the host as well. However, this only applies for per-target
configuration, for example the setting of "cc" in the config.toml
generated by package/rust/rust.mk. Flags that are passed with RUSTFLAGS
still apply to both host and target. Therefore, we need to use the
CARGO_TARGET_<tuple>_RUSTFLAGS environment variable instead of plain
RUSTFLAGS.
This, however, doesn't allow us to specify flags that apply only to the
host. We could use CARGO_TARGET_<hosttuple>_RUSTFLAGS for that, but that
doesn't work in case the host and target tuple are the same. For this,
we need another unstable feature, enabled with
CARGO_UNSTABLE_HOST_CONFIG="true". With this enabled, we can specify
flags that apply only for the host build using CARGO_HOST_RUSTFLAGS.
Currently, we don't have any such flags, but we really should: we should
pass the proper link flags to point to $(HOST_DIR)/lib. Therefore, add
CARGO_HOST_RUSTFLAGS doing exactly that.
[1] https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#host-config
[2] https://github.com/rust-lang/cargo/pull/10395
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit b40a2cc391)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The shebang in check-package now defines python3. There is no longer a
need to maintain support with python 2.x.
See-also: 02b165dc71 (check-package: fix Python3 support)
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Tested-by: James Knight <james.d.knight@live.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b7d4ae98fa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For years already, $(HOST_DIR)/usr is deprecated. Install directly in
$(HOST_DIR). This will trigger a check-package error in the following
commit.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 47910ccc36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move RUSTFLAGS for host builds to HOST_PKG_CARGO_ENV so that they
are set for host cargo builds which don't use the cargo infrastructure,
e.g. python packages that include rust code.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit d775b2ac05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mdadm contains various udev rules to manage RAID assembly and create
symlinks, install them if udev (or equivalent) is enabled.
Signed-off-by: Simon Rowe <simon.rowe@nutanix.com>
[Arnout: use MDADM_INSTALL_TARGET_OPTS for install-bin as well]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 0385719706)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The version of U-Boot must be explicitly set because if you keep the
default setting, the bootloader is continuously updated in buildroot with
the risk of building a non-working image.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 924b163b1e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.19.8 (released 2023-04-04) includes security fixes to the go/parser,
html/template, mime/multipart, net/http, and net/textproto packages, as well as
bug fixes to the compiler, the linker, the runtime, and the time package.
Fixes security vulnerabilities:
go/parser: infinite loop in parsing (CVE-2023-24537)
html/template: backticks not treated as string delimiters (CVE-2023-24538)
net/http, net/textproto: denial of service from excessive memory
allocation (CVE-2023-24534)
net/http, net/textproto, mime/multipart: denial of service from excessive
resource consumption (CVE-2023-24536)
https://go.dev/doc/devel/release#go1.19.8https://github.com/golang/go/issues?q=milestone%3AGo1.19.8+label%3ACherryPickApproved
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b7eaa9af7b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the fifth patch release in the 1.1.z series of runc, which fixes
three CVEs found in runc.
CVE-2023-25809 is a vulnerability involving rootless containers where
(under specific configurations), the container would have write access to the
/sys/fs/cgroup/user.slice/... cgroup hierarchy. No other hierarchies on the host
were affected. This vulnerability was discovered by Akihiro Suda.
GHSA-m8cg-xc2p-r3fc
CVE-2023-27561 was a regression which effectively re-introduced CVE-2019-19921.
This bug was present from v1.0.0-rc95 to v1.1.4. This regression was discovered
by Beuc. GHSA-vpvm-3wq2-2wvm
CVE-2023-28642 is a variant of CVE-2023-27561 and was fixed by the same patch.
This variant of the above vulnerability was reported by Lei Wang.
GHSA-g2j6-57v7-gm8c
In addition, the following other fixes are included in this release:
- Fix the inability to use /dev/null when inside a container
- Fix changing the ownership of host's /dev/null caused by fd redirection
- Fix rare runc exec/enter unshare error on older kernels, including CentOS < 7.7
- nsexec: Check for errors in write_log()
https://github.com/opencontainers/runc/releases/tag/v1.1.5
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 52976c54f7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From [1]:
* sshd(8): fix a pre-authentication double-free memory fault
introduced in OpenSSH 9.1. This is not believed to be exploitable,
and it occurs in the unprivileged pre-auth process that is
subject to chroot(2) and is further sandboxed on most major
platforms.
* ssh(8): in OpenSSH releases after 8.7, the PermitRemoteOpen option
would ignore its first argument unless it was one of the special
keywords "any" or "none", causing the permission list to fail open
if only one permission was specified. bz3515
* ssh(1): if the CanonicalizeHostname and CanonicalizePermittedCNAMEs
options were enabled, and the system/libc resolver did not check
that names in DNS responses were valid, then use of these options
could allow an attacker with control of DNS to include invalid
characters (possibly including wildcards) in names added to
known_hosts files when they were updated. These names would still
have to match the CanonicalizePermittedCNAMEs allow-list, so
practical exploitation appears unlikely.
From [2]:
* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.
* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.
The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.
[1] https://www.openssh.com/txt/release-9.2
[2] https://www.openssh.com/txt/release-9.3
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 68ca5f1e1f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-22432: Open redirect vulnerability exists in web2py
versions prior to 2.23.1. When using the tool, a web2py user may be
redirected to an arbitrary website by accessing a specially crafted URL.
As a result, the user may become a victim of a phishing attack.
https://github.com/web2py/web2py/compare/v2.23.0...v2.23.1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 11f8c11dfb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fixed (security) [APP-70]: Memory leak in MibLeaf::set if same OID is set
twice in the same PDU.
- Fix the following build failure raised since bump of snmppp to version
3.5.0 in commit e011fa0415:
snmp_pp_ext.cpp: In member function 'int Agentpp::Snmpx::send(const Agentpp::Pdux&, Snmp_pp::SnmpTarget*)':
snmp_pp_ext.cpp:1172:47: error: binding reference of type 'Snmp_pp::Pdu&' to 'const Snmp_pp::Pdu' discards qualifiers
1172 | status = snmpmsg.loadv3(Snmp::get_mpv3(), pdu, engine_id, security_name,
|
Fixes:
- http://autobuild.buildroot.net/results/d7347b8b3953596b66da6ca6d85f084fb427934c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5f06ecf5e1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-27371: GNU libmicrohttpd before 0.9.76 allows remote DoS
(Denial of Service) due to improper parsing of a multipart/form-data
boundary in the postprocessor.c MHD_create_post_processor() method. This
allows an attacker to remotely send a malicious HTTP POST packet that
includes one or more '\0' bytes in a multipart/form-data boundary field,
which - assuming a specific heap layout - will result in an
out-of-bounds read and a crash in the find_boundary() function.
https://lists.gnu.org/archive/html/libmicrohttpd/2023-02/msg00000.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3b645ffda6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The impetus for this change was that wget fails to load pages signed by
Let's Encrypt due to missing root certs. This version has the updated and
correct certs.
0002-mozilla-certdata2pem.py-Fix-compat-with-cryptography.patch
Patch dropped because the fix is incorporated upstream.
Signed-off-by: Steve Hay <me@stevenhay.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9f5c8bd430)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
- http://autobuild.buildroot.net/results/fdf2b2eb252a24e81bddad1c81c4fdfb03dc0afe
.../build/qt6base-6.4.2/src/plugins/tls/openssl/qdtls_openssl.cpp: In member function 'bool dtlsopenssl::DtlsState::initCtxAndConnection(QDtlsBasePrivate*)':
.../build/qt6base-6.4.2/src/plugins/tls/openssl/qdtls_openssl.cpp:669:9: error: 'q_SSL_set_psk_server_callback' was not declared in this scope; did you mean 'q_SSL_set_psk_use_session_callback'?
669 | q_SSL_set_psk_server_callback(newConnection.data(), dtlscallbacks::q_PSK_server_callback);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| q_SSL_set_psk_use_session_callback
.../build/qt6base-6.4.2/src/plugins/tls/openssl/qdtls_openssl.cpp:671:9: error: 'q_SSL_set_psk_client_callback' was not declared in this scope; did you mean 'q_SSL_set_info_callback'?
671 | q_SSL_set_psk_client_callback(newConnection.data(), dtlscallbacks::q_PSK_client_callback);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| q_SSL_set_info_callback
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 971ae7b266)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When running "make check-package" on a system with shellcheck 0.9.0,
the command fails with output:
make check-package
package/linux-tools/S10hyperv:0: run 'shellcheck' and fix the warnings
...
2 warnings generated
This commit fixes the warnings reported by the command:
shellcheck package/linux-tools/S10hyperv
This commit also fixes the four-space indent by a single tab on the
changed lines. Since this fixes the indentation warnings of
check-package, the Indent exclusion in .checkpackageignore is also
removed.
Fixes:
In package/linux-tools/S10hyperv line 27:
return $ret
^--^ SC2086 (info): Double quote to prevent globbing and word splitting.
In package/linux-tools/S10hyperv line 48:
return $ret
^--^ SC2086 (info): Double quote to prevent globbing and word splitting.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c4173d8b08)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bagas is keen to maintain git package for Buildroot. However, due to
limited resources available, he can only do testing as far as
build testing. Other developers are needed to help him maintain the
package.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 562cf1fbdb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
