The patch bumps the Linux kernel to version 6.12.36 and U-Boot to
version 2025.07.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This reverts commit e44aff6b1b which added
support for linking ffmpeg against libpulse if it is present to provide
libavdevice support for the PulseAudio protocol. However, it turns out
that this creates a dependency cycle when BR2_PACKAGE_LIBSOXR is
enabled, since the pulseaudio daemon can use libsoxr for resampling and
libsoxr can use the FFT implementation from ffmpeg.
Resolving this would probably mean breaking up the pulseaudio package
into the client libraries and the daemon proper (a standalone libpulse
without the daemon is still useful since it can talk to a remote daemon
via the network or more likely today talk to a local instance of
PipeWire, which also implements the PulseAudio protocol).
For now, break the dependency cycle by reverting to the original state
(no pulseaudio client support in ffmpeg).
Reported-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
For release notes since version 27.5.1, see:
https://github.com/moby/moby/releases
Since version 28.0.0, docker-engine requires the RAW netfilter table, so
enable that as part of the kernel fixups.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Christian Stewart <christian@aperture.us>
[Julien: add link to release notes]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Via the docker-compose runtime test, we can exercise the full suite of
the docker-related packages: docker-compose, of course, but also
docker-engine, which in turn allows exercising containerd. The latter
by defualt uses runc as the container runtime, but can alternatively use
crun.
Extend the docker-compose runtime test with a variant that enables crun.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Upstream passt only documents runtime dependencies; and they advertise
being able to run on kernel 3.8 or later. However, they do not document
the build dependencies.
As reported by Julien, since 2024_12_11.09478d5, upstream requires
kernel headers >= 5.0, as they make use of linux/vhost_types.h, only
introduced in 5.0.
Add a dependency to kernel headers, and propagate it to podman's passt
backend.
Reported-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
When building libesmtp on the autobuilder with gcc-14, the
following error occurs:
/workdir/instance-0/output-1/per-package/libesmtp/host/bin/arc-linux-gcc -Ilibesmtp.so.6.2.0.p -I. -I.. -I/workdir/instance-0/output-1/per-package/libesmtp/host/arc-buildroot-linux-gnu/sysroot/usr/include -fdiagnostics-color=always -Wall -Winvalid-pch -std=c11 -O3 -D_POSIX_C_SOURCE=200809L -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=2 -fPIC -pthread -MD -MQ libesmtp.so.6.2.0.p/smtp-api.c.o -MF libesmtp.so.6.2.0.p/smtp-api.c.o.d -o libesmtp.so.6.2.0.p/smtp-api.c.o -c ../smtp-api.c
../smtp-api.c: In function 'smtp_version':
../smtp-api.c:1183:7: error: implicit declaration of function 'strlcpy'; did you mean 'strncpy'? [-Wimplicit-function-declaration]
1183 | if (strlcpy (buf, v, len) > len)
| ^~~~~~~
| strncpy
This error has been fixed upstream in commit [1], but no new release
has been made since.
This patch update the package version to fetch the latest upstream
commit v1.1.0-14-g335ee8d.
For the changes, see:
- https://github.com/libesmtp/libESMTP/compare/v1.1.0...335ee8d2fa5cb7d30db7b818ec05563ad139ee2f
[1] 972eb54749
Fixes: https://autobuild.buildroot.org/results/ced/ceda012506edccda1727904eb3327017b07e27d8
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
[Julien:
- mention gcc-14 as the root cause of the build failure
- use "git describe --tags --abbrev=40" format in _VERSION
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This brings the script in line with current init script standards, and
fixes all make check-package warnings. Other notable changes:
* Use start-stop-daemon to create a PID file, so we can monitor shutdown.
* Use "udevadm control --exit" to implement stop, instead of "killall".
* Do not require /etc/udev/udev.conf to exist, the default contains
only comments and udevd works without.
* Do not parse /etc/udev/udev.conf, the udev_root configuration option
it was used for has been removed in version 1.5.1 [1].
* Implement reload using udevadm.
[1] 6ada823a9a
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The hwdb sources are always deleted from the rootfs image (see commit
07aa585aa6), so the resulting hwdb.bin
is installed package data, not user configuration. The name of the
"--usr" flag to "udevadm hwdb" may be confusing, but it chooses the
libexecdir location, whether that is in /usr or not.
Eudev checks both locations and prefers the one in /etc if it exists,
so overriding the configuration in an installed system is possible as
before, with the advantage that /etc/udev/hwdb.bin (if any) can be
deleted to restore defaults.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
It was removed from eudev with version 1.5.1, when introspection
became part of the gudev option [1]. This has in turn been removed and
replaced by package/libgudev, yet somehow the flag stayed. Remove it
to remove a warning during configure stage.
[1] d5d6a7f304
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Minimum python version is now 3.9, but also it's not really relevant to
mention this in the package description.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Currently, both BR2_TARGET_ROOTFS_EROFS_ALL_FRAGMENTS and
BR2_TARGET_ROOTFS_EROFS_FRAGMENTS have the same Kconfig prompt, making
them hard to distinguish.
Reword the one for -Eall-fragments to be distinct.
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Version 2.23 change log:
* support MPD protocol 0.24.0
- allow window for listplaylist and listplaylistinfo
- command "playlistlength", "protocol", "stickertypes",
"stickernamestypes", "searchplaylist"
- tag "ShowMovement"
- new sticker find api
- new subcommands for "tagtypes": "available", "reset"
* Support open end for mpd_search_add_window
* format floating-point numbers with the POSIX localew
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Tested-by: Andreas Ziegler <br015@umbiko.net>
[Julien: update signature link in hash file]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Needed for kodi 22.x.
Added build fix for >= gcc-13.
Switched build system to cmake following upstream:
13683c56e5
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Julien: use "git describe --tags --abbrev=40" format for _VERSION]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch replaces the previous patch allowing to build with ffmpeg 6.x
with a patch which also allows to build with ffmpeg 7.x.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The following build error is happening on the autobuilder:
```
arg_int.c:60:12: error: implicit declaration of function 'isspace' [-Wimplicit-function-declaration]
60 | while (isspace(*ptr))
| ^~~~~~~
arg_int.c:33:1: note: include '<ctype.h>' or provide a declaration of 'isspace'
32 | #include <limits.h>
+++ |+#include <ctype.h>
33 |
arg_int.c:89:8: error: implicit declaration of function 'toupper' [-Wimplicit-function-declaration]
89 | if (toupper(*ptr++)!=toupper(X))
| ^~~~~~~
arg_int.c:89:8: note: include '<ctype.h>' or provide a declaration of 'toupper'
```
Both `isspace` and `toupper` are declared in the `ctype.h` header.
This build error started to happen with gcc-14.
The `ctype.h` include was added in a later upstream commit.
This patch adds that upstream commit and strip everything else to only
patch that include.
Fixes: https://autobuild.buildroot.org/results/d38/d38e3e12f52c3fde08ab446ca14a1a7bd65c9469//
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
[Julien: add comment about gcc-14]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to extlinux instead of built in U-Boot script.
Drop custom U-Boot fragment and genimage config.
Update U-Boot from 2024.01 to 2025.07. This new U-Boot now
requires BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y in the defconfig.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Julien:
- mention U-Boot bump in commit log
- add BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
