When one of BR2_PACKAGE_FFTW_PRECISION_* is enabled, liquid-dsp links
against fftw3f, fftw3 or fftw3l, but forgets to add the fftw package
in its dependencies. It works fine in practice because "fftw" is
before "liquid-dsp" in the alphabetic ordering, but building with
"make liquid-dsp" or with per-package directory causes a build
failure.
Fix that by adding the missing dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2517fa73ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sdl2_net configure script uses pkg-config to finx sdl2. If it
doesn't find pkg-config, it tries to locate sdl2-config, and defaults
to /usr/bin/sdl2-config, which causes the build to fail with:
arm-linux-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/SDL2'
Fix this by adding host-pkgconf to the dependencies of sdl2_net. We
could have added the right autoconf cache variable to tell the
configure script where sdl2-config is located, but since pkg-config is
tried first, let's use that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c2a1bcb1b3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like the build of the target wine, the build of host wine also
needs bison and flex, otherwise the build fails with:
checking for flex... no
configure: error: no suitable flex found. Please install the 'flex' package.
(and similarly for bison once host-flex is provided)
This was detected using per-package directories. It used to "work"
because host-wine comes alphabetically after host-flex and host-bison,
which are dependencies of target wine.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e4d153b16a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- Node.js: Denial of Service with large HTTP headers (CVE-2018-12121)
- Node.js: Slowloris HTTP Denial of Service (CVE-2018-12122 / Node.js)
- Node.js: Hostname spoofing in URL parser for javascript protocol
(CVE-2018-12123)
- Node.js: HTTP request splitting (CVE-2018-12116)
- OpenSSL: Timing vulnerability in DSA signature generation (CVE-2018-0734)
- OpenSSL: Microarchitecture timing vulnerability in ECC scalar
multiplication (CVE-2018-5407)
For more details, see the announcement:
https://nodejs.org/en/blog/release/v8.14.0/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0de2c9c76c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-19518: University of Washington IMAP Toolkit 2007f on UNIX,
as used in imap_open() in PHP and other products, launches an rsh command
(by means of the imap_rimap function in c-client/imap4r1.c and the tcp_aopen
function in osdep/unix/tcp_unix.c) without preventing argument injection,
which might allow remote attackers to execute arbitrary OS commands if the
IMAP server name is untrusted input (e.g., entered by a user of a web
application) and if rsh has been replaced by a program with different
argument semantics. For example, if rsh is a link to ssh (as seen on Debian
and Ubuntu systems), then the attack can use an IMAP server name containing
a "-oProxyCommand" argument.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1af5232138)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The logic to ensure at least one compression backend is selected was not
updated when lz4, xz and zstd were introduced - Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[Peter: add comment as suggested by Peter Seiderer]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 84aeb4419f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported in bug #11426, the ppsfind shell script uses /bin/bash,
but the Buildroot pps-tools package doesn't depend on bash. In fact,
upstream has fixed the problem, and the script can now be used with a
POSIX shell, and the shebang is /bin/sh.
This commit therefore bumps pps-tools to the latest upstream commit,
which is precisely this fix.
Fixes bug #11426.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5c89726d9f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Lynx configure script uses pkg-config when available:
checking for nios2-buildroot-linux-gnu-pkg-config... /home/thomas/projets/buildroot/output/host/bin/pkg-config
checking pkg-config for openssl... yes
[...]
checking pkg-config for ncurses... yes
Using pkg-config avoids build failures such as:
checking for _nc_freeall... no
configure: error: Configuration does not support color-styles
make: *** [/home/test/autobuild/run/instance-1/output/build/lynx-2.8.9rel.1/.stamp_configured] Error 1
When building with "make lynx", so that pkg-config is not built
before. The issue is that in this case, lynx configure script picks up
the ncurses6-config script for the host ncurses instead of the one in
staging. Using pkg-config solves that nicely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 67ee7f9eb1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using an initramfs, on the first-pass build, we create a dummy cpio
so that the build succeeeds. The real cpio will come later, and we'll do
a second-pass build to use the actual cpio.
However, when we touch that dummy cpio, the images/ directory may not
yet exist, since commit d0f4f95e39 (Makefile: rework main directory
creation logic) removed its creation at the begining of the build, to
only at the moment we need it, i.e. during the *_INSTALL_IMAGES_CMDS
steps.
However, the linux build is not a _INSTALL_IMAGES_CMDS step, so there is
no guarantee that images/ already exist at that time.
Fix that by explicitly creating images/ before touching the dummy cpio.
Reported-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 524fb10bbe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcurl doesn't find any trust path for CA certs when it cross-compiles.
When using OpenSSL, it is explicitly configured to use the SSL cert
directory with OpenSSL style hash files in it. But with GnuTLS, it gets
nothing.
Rather than configure libcurl to use the OpenSSL directory or a bundle
file, configure it to use the GnuTLS default. This way the CA certs
path can be configured in one place (gnutls) and then libcurl and anyone
else who uses gnutls can default to that.
Also, when libcurl with gnutls is configured to use a directory, it ends
up loading each cert three times.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 43b4d3ae45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gnutls is building with no default location to look for CA certs. Since
there are buildroot packages to provide these, configure it to use them
by default.
Configure gnutls to find them using the bundle file which contains all
certs, rather than looking in the cert directory. When gnutls is told
to use the directory, it loads *every* file in it. This means it loads
the bundle with all certs, then loads each cert a second time using the
individual pem files, and then loads them all the third time via the
hash symlinks to the pem files.
When p11-kit is enabled, use its trust module instead of the bundle
file. p11-kit can be configured to use the bundle (the default), but it
can do other things too, such as integrate with the "trust" command for
adding and removing trust anchors.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 379306e8f2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fstatfs/statfs on aarch64 seems broken, add a patch from uClibc-ng
upstream git to fix it.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2179ca4a61)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
CVE-2018-19591: A file descriptor leak in if_nametoindex can lead to a
denial of service due to resource exhaustion when processing getaddrinfo
calls with crafted host names. Reported by Guido Vranken.
Adhemerval Zanella (2):
Fix misreported errno on preadv2/pwritev2 (BZ#23579)
x86: Fix Haswell CPU string flags (BZ#23709)
Alexandra Hájková (1):
Add an additional test to resolv/tst-resolv-network.c
Andreas Schwab (1):
libanl: properly cleanup if first helper thread creation failed (bug 22927)
Florian Weimer (3):
preadv2/pwritev2: Handle offset == -1 [BZ #22753]
conform: XFAIL siginfo_t si_band test on sparc64
CVE-2018-19591: if_nametoindex: Fix descriptor for overlong name [BZ #23927]
Ilya Yu. Malakhov (1):
signal: Use correct type for si_band in siginfo_t [BZ #23562]
Martin Kuchta (1):
pthread_cond_broadcast: Fix waiters-after-spinning case [BZ #23538]
Stefan Liebler (2):
Fix segfault in maybe_script_execute.
Fix race in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP [BZ #23275]
Szabolcs Nagy (1):
i64: fix missing exp2f, log2f and powf symbols in libm.a [BZ #23822]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2018-17961: Artifex Ghostscript 9.25 and earlier allows attackers to
bypass a sandbox protection mechanism via vectors involving errorhandler
setup. NOTE: this issue exists because of an incomplete fix for
CVE-2018-17183.
- CVE-2018-18284: Artifex Ghostscript 9.25 and earlier allows attackers to
bypass a sandbox protection mechanism via vectors involving the 1Policy
operator.
- CVE-2018-19409: An issue was discovered in Artifex Ghostscript before
9.26. LockSafetyParams is not checked correctly if another device is
used.
- CVE-2018-19475: psi/zdevice2.c in Artifex Ghostscript before 9.26 allows
remote attackers to bypass intended access restrictions because available
stack space is not checked when the device remains the same.
- CVE-2018-19476: psi/zicc.c in Artifex Ghostscript before 9.26 allows
remote attackers to bypass intended access restrictions because of a
setcolorspace type confusion.
- CVE-2018-19477: psi/zfjbig2.c in Artifex Ghostscript before 9.26 allows
remote attackers to bypass intended access restrictions because of a
JBIG2Decode type confusion.
For more details, see the release notes:
https://www.ghostscript.com/doc/9.26/History9.htm#Version9.26
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e52b02677a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
*) Microarchitecture timing vulnerability in ECC scalar multiplication
OpenSSL ECC scalar multiplication, used in e.g. ECDSA and ECDH, has been
shown to be vulnerable to a microarchitecture timing side channel attack.
An attacker with sufficient access to mount local timing attacks during
ECDSA signature generation could recover the private key.
This issue was reported to OpenSSL on 26th October 2018 by Alejandro
Cabrera Aldaya, Billy Brumley, Sohaib ul Hassan, Cesar Pereida Garcia and
Nicola Tuveri.
(CVE-2018-5407)
[Billy Brumley]
*) Timing vulnerability in DSA signature generation
The OpenSSL DSA signature algorithm has been shown to be vulnerable to a
timing side channel attack. An attacker could use variations in the signing
algorithm to recover the private key.
This issue was reported to OpenSSL on 16th October 2018 by Samuel Weiser.
(CVE-2018-0734)
[Paul Dale]
For more information, see the changelog:
https://www.openssl.org/news/cl102.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3301b6e1b2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PLATFORM is an environment variable used by xfsprogs' configure script
to determine the platform for which the applications are being built. If
we set some incorrect/unsupported value through e.g: export, this will
be picked up by xfsprogs' configure script and used as-is and assigned
to PKG_PLATFORM, which will lead to build failures.
If PLATFORM was empty/unset, then uname on the host building xfsprogs
gets used to determine the build platform, which again could be
incorrect if we e.g: built xfsprogs on a Darwin system.
Since we are obviously building for Linux, let's just make sure we
define it that way which solves both issues.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 257a2118be)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2018-14629:
All versions of Samba from 4.0.0 onwards are vulnerable to infinite
query recursion caused by CNAME loops. Any dns record can be added via
ldap by an unprivileged user using the ldbadd tool, so this is a
security issue.
- CVE-2018-16841:
When configured to accept smart-card authentication, Samba's KDC will call
talloc_free() twice on the same memory if the principal in a validly signed
certificate does not match the principal in the AS-REQ.
This is only possible after authentication with a trusted certificate.
talloc is robust against further corruption from a double-free with
talloc_free() and directly calls abort(), terminating the KDC process.
There is no further vulnerability associated with this issue, merely a
denial of service.
- CVE-2018-16851:
During the processing of an LDAP search before Samba's AD DC returns
the LDAP entries to the client, the entries are cached in a single
memory object with a maximum size of 256MB. When this size is
reached, the Samba process providing the LDAP service will follow the
NULL pointer, terminating the process.
There is no further vulnerability associated with this issue, merely a
denial of service.
- CVE-2018-16853:
A user in a Samba AD domain can crash the KDC when Samba is built in the
non-default MIT Kerberos configuration.
With this advisory we clarify that the MIT Kerberos build of the Samba
AD DC is considered experimental. Therefore the Samba Team will not
issue security patches for this configuration.
For more details, see the release notes:
https://www.samba.org/samba/history/samba-4.8.7.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tests are enabled if gperf and zlib are found and they fail on:
/home/buildroot/autobuild/run/instance-0/output/build/msgpack-2.1.5/include/msgpack/v1/object.hpp:652:34:
error: 'void* memcpy(void*, const void*, size_t)' copying an object of non-trivial type 'struct msgpack::v2::object' from an array of 'const msgpack_object' {aka 'const struct msgpack_object'} [-Werror=class-memaccess]
std::memcpy(&o, &v, sizeof(v));
So disable them.
Fixes:
- http://autobuild.buildroot.org/results/7d7aa9723f02f9bc78dbf6248674be4d402199bf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d2d75e07db)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libid3tag uses a very old configure script.
When the toolchain lacks C++ and the build machine lacks /lib/cpp, this
old configure script fails because it can't find a C++ preprocessor that
is valid:
checking for arm-buildroot-linux-uclibcgnueabi-g++... no
checking whether we are using the GNU C++ compiler... no
checking whether no accepts -g... no
checking dependency style of no... none
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.
This is yet another case that was tentatively fixed by bd39d11d2e
(core/infra: fix build on toolchain without C++), further amended by
4cd1ab1588 (core: alternate solution to disable C++).
However, this only works on libtool scripts that are recent enough, and
thus we need to autoreconf to get it.
We also need to patch configure.ac so that it does not fail on the
missing, GNU-specific files: NEWS, AUTHORS, and Changelog.
Fixes:
http://autobuild.buildroot.org/results/ac3/ac3870208aab6001db6b790b6c5dde64d08f7669/http://autobuild.buildroot.org/results/cc1/cc18397f38dfd4f1e6605f7a6f58edab49b396ac/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 43274dd3e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains security fixes for CVE-2018-4345, CVE-2018-4372,
CVE-2018-4373, CVE-2018-4375, CVE-2018-4376, CVE-2018-4378,
CVE-2018-4382, CVE-2018-4386, CVE-2018-4392, and CVE-2018-4416.
Additionally, it fixes a few build failures, and a crash when using
certain version of Cairo.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/11/21/webkitgtk2.22.4-released.html
More details on the issues covered by security fixes can be found
in the corresponding security advisory:
https://webkitgtk.org/security/WSA-2018-0008.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7a827a17dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build of package will sometime fails because of the following issue:
install-static target has two dependencies: dispatcher-static and
install-common
Because dispatcher-static is not a file but only a target, it will
always be called to build usb_modeswitch_dispatcher.
So, even if install-common depends on usb_modeswitch_dispatcher, in some
rare cases, install-static won't be able to install
usb_modeswitch_dispatcher because it is being rebuild by
dispatcher-static
To fix this issue, disable parallel build
Fixes:
- http://autobuild.buildroot.org/results/8297be35725b816ff5afaf909605ceb41223efb6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a554109af8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Graphviz' dot utility does not like nodes which names does not start
with an ^[[:alpha:]], i.e. 18xx-ti-utils would cause grievance:
Warning: syntax ambiguity - badly delimited number '18x' in line 4 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 5 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 6 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 7 [...]/graph-depends.dot splits into two tokens
Prefix nodes with an underscore to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 020206ca57)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Checking for the existence of the dtc binary built by the
non-dependent dtc package may cause instable behaviour when giving more
freedom on the order of how the packages are built (parallelization).
In addidion, when moving to per-package host/target method, the check
would always trigger in the isolated host, leading to linux-dtc always
being installed as dtc.
This in turn may lead to undesired overwriting of the real host-dtc binary
when finally assembling the global host dir.
Thus rework the linux-dtc install condition to be defined by configuration
rather than compile time order.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 860906ee05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The U-Boot part of the defconfig was not specifying explicitly any
U-Boot version. Since commit 21e3ae8a18
("boot/uboot: default to kconfig buildsystem for latest version"), we
default to using the kconfig build system when the default U-Boot
version is used. Following this change, the apf27 defconfig therefore
started using kconfig, for which the BR2_TARGET_UBOOT_BOARDNAME
Config.in option is not used. Due to this, the build fails with:
boot/uboot/uboot.mk:411: *** No board defconfig name specified, check your BR2_TARGET_UBOOT_BOARD_DEFCONFIG setting. Stop.
Indeed, when Kconfig is used, the board defconfig must be specified
with BR2_TARGET_UBOOT_BOARD_DEFCONFIG.
As part of fixing this, we also set a fixed U-Boot version for this
defconfig, like we do in all other defconfigs.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771003
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a8aaee72a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
