sqlite 3.49.0 has changed its buildsystem, causing a lot of breakage
along the lines.
Although a few fixes have already been applied (and reverted in the
previous commits), there are remaining pain-points that are not trivial
to fix in a timely manner :
- the buildsystem forces an rpath to /usr/lib, and it is not obvious
how to prevent that (excepyt with patching),
- there is an optional dependency to zlib that is not accounted for,
neither in the target nor in the host variants; this causes issues
when the build host has libz-devel (or similar) already installed,
in whicxh case sqlite detets it and links with it; as it is missing
an rpath to $(HOST_DIR)/lib, this causesw a build failure when
another package pulls in zlib. See:
https://autobuild.buildroot.org/results/1a81cb7c88a41a03767a1a201ee0628468f60766/build-end.loghttps://lore.kernel.org/buildroot/20250219195112.GA2631528@pevik/T/#mb7c7ac63902ed55623a5adf5d1db4a3f60db9fef
Fixing the second issue would seem easy enough, but zlib could depend on
ccache (when that is enabled), and ccqche depends on sqlite, so that
would be a circular dependency. And there is no option in sqlite's
configure script to forcefully disable use of zlib...
A revert is the quickest solution to unbreak for the time being, as the
next release is nearing due date. Another bump can be attempted later,
that addresses all the remaining issues.
This reverts commit db85638cea.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Scott Fan <fancp2007@gmail.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Petr Vorel <petr.vorel@gmail.com>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
- Bump Linux kernel to v6.12.15, update the hash file and add the
dependency on host-python3.
- Bump the FVP in the readme to version 11.27 build 19.
While at it:
- Rework the readme a bit with explicit build instructions, add a link
to the model binaries running on AArch64 host and update the model
command line to specify Arm v8.0 (as we are building for Cortex-A53).
- Turn on hashes verification and update .checkpackageignore
accordingly.
- Add myself as co-developer for this defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
[Julien: remove "Locally calculated" in linux.hash]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit c619346111 (package/kodi: bump version to 21.0-Omega) added a
select onto libdisplay-info from a blind option that only represents
whether a specific subset of Kodi is available, not whether Kodi itself
is enabled.
This causes useless builds of libdisplay-info for a lot of builds where
Kodi is not enabled.
Move the select to the main Kodi symbol itself, guarded with the proper
condition, like a few existing dependencies for GBM.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Add another option for FS compression that allows fine-grained control using a
list of algorithms and optional compress-hints file. This way multiple
algorithms and pcluster sizes can be used for different files, fully exposing
EROFS compression abilities.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add Kconfig toggles for a few more extended options that are useful for
reducing size and improving performance of EROFS images. Descriptions of the
config options were taken from the erofs-utils manpage.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
[Arnout: fix Config.in help text and indentation]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Instead of having a bool option for enabling the LZ4HC compression, change the
Kconfig definition to a choice, which also adds more flexibility in the future
(e.g. for enabling ZSTD compression). The name of the old option was preserved
so defconfigs using it won't be affected.
Also both for LZMA and LZ4HC, it's now possible to define compression level.
Previously it defaulted to 9, which generates images larger than squashfs with
comparable settings (which uses level 12 by default). For LZ4HC the default if
unset would be still 9.
Use a separate config option for LZMA and LZ4HC compression level,
because their ranges and meaning are different.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
RNNoise is a noise suppression library based on a recurrent neural network.
Add an upstream post-0.2 patch to fix a build issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Julien: remove --disable-doc in _CONF_OPTS already in infra]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This configuration builds an image for the Polyhex Debix Model A SBC
DEBIX Model A is an industrial grade single board computer
powered by NXP i.MX 8M Plus applications processor
https://www.debix.io/hardware/model-a.html
- Linux Kernel: Upstream version 6.12.14
- U-boot: Upstream version 2025.01
- ATF: Upstream version 2.12
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Currently, our docker-run helper will decide on its own whether it
should use docker (preferred) or podman (fallback), as introduced in
9a629f5129 (utils/docker-run: allow running with Podman). In case
both are installed, it is not possible to exercise the podman case.
Often, 'docker' is just an alias for 'podman' when both are available,
but this is not always true - and in the latter case, the user needs to
be able to choose which one they want.
Allow the user to force the one to use, by setting the BR2_DOCKER
environment variable. If that is set and it doesn't exist, exit with
an explicit error message (rather than relying on the failure when
eventually exec-ing the specified command).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Cc: Julien Olivain <ju.o@free.fr>
Cc: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We want to redirect both stdout and stderr to the log, so just do both
redirections at once. This simplifies the call to make, which was
inherited from afdb545b28 (tools: new tool to filter the output of
make) when brmake was using unbuffer (and even then it was not entirely
waranted to do the redirection that way).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
All our documented uses of utils/docker-run, besides running it
standalone to get an interactive shell, is to use it as a prefix
to the otherwise standard command to run, e.g.:
- ./utils/docker-run make foo_defconfig
- ./utils/docker-run make menuconfig
- ./utils/docker-run make
- ./utils/docker-run make check-package
Commit 8aad67f157 (utils/brmake: add option to run in docker) departed
from that usual convention, by hiding the call to docker-run inside
brmake, conditioned by an environment variable. The only reason is that
brmake internally used ubuffer. This is no longer the case, so we can
now use brmake together with docker-run in the usual manner.
This basically reverts commit 8aad67f157,
after resolving the conflict due to the removal of unbuffer in te
previous commit.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When it was introduced in afdb545b28 (tools: new tool to filter the
output of make), brmake made use of unbuffer, so as to try and ensure
that no output would get lost between make printing it, and the logger
loop time-stamping it and storing it in the logfile, in case the user
would interrup the build (SIGINT, ^C)
However, unbuffer is missing in our reference build image (we could have
added it, but we missed the occasion to do so every time we updated the
reference build image).
Furthermore, the rationale for using unbuffer, although reasonable, is
not so practical: indeed, when the user hits Crtl-C, this is inherently
asynchronous, and they can't expect everything to be entirely cleanly
terminated, especially buffering. Using unbuffer is thus slightly
superfluous.
The timestamps will be slightly off because of buffering, but a build
generates so much output that this won't be a problem in practice.
Drop use of unbuffer.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Now that BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH can contain multiple tuples,
BR2_TARGET_XILINX_EMBEDDEDSW can no longer be dependent on:
depends on BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH = "microblazeel-xilinx-elf"
A valid definition could have "microblazeel-xilinx-elf" as just one of many
tuples in the list.
For this reason, this patch changes the dependency to:
depends on BR2_TOOLCHAIN_BARE_METAL_BUILDROOT
One side effect of this is that the user comment will be displayed now when
using multiple tuples, even if one of them is the required tuple.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Now that binutils-bare-metal, gcc-bare-metal and newlib-bare-metal packages
have been upgraded to support a list of architecture tuples, this patch
updates the toolchain-bare-metal-buildroot help text to describe the new
capability.
BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH is still backwards compatible with
its prior definition as defining a single tuple with this new definition
works exactly the same as before.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add support to gcc-bare-metal to support multiple architecture tuples
with the BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH string.
To do this, custom configure, build and install commands are needed, so that
each step goes through a loop of the architecture tuples in the list.
To keep consistency with autotools, all the relevant target configurations
have been copied into the NEWLIB_BARE_METAL_CONF_OPTS while removing any
configurations that do not apply to newlib.
Also, the following configs were not taken because newlib is being built for
each of the bare-metal targets and not the main target of Buildroot.
$$(TARGET_CONFIGURE_OPTS)
$$(TARGET_CONFIGURE_ARGS)
--target=$$(GNU_TARGET_NAME)
--host=$$(GNU_TARGET_NAME)
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add support to gcc-bare-metal to support multiple architecture tuples
with the BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH string.
To do this, custom configure, build and install commands are needed, so that
each step goes through a loop of the architecture tuples in the list.
To keep consistency with autotools, all the relevant host configurations have
been copied into the HOST_GCC_BARE_METAL_CONF_OPTS while removing any
configurations that do not apply to gcc and removing redundant configs.
autotools redundant configs covered by $(HOST_CONFIGURE_OPTS):
CFLAGS="$$(HOST_CFLAGS)"
LDFLAGS="$$(HOST_LDFLAGS)"
autotools configs not applicable to gcc:
--disable-gtk-doc
--disable-gtk-doc-html
--disable-doc
--disable-docs
--disable-documentation
--disable-debug
--with-xmlto=no
--with-fop=no
--disable-nls
While we're at it: the following configuration option was incorrect:
--disable-initfini_array -> --disable-initfini-array
configure converts - to _ anyway so it makes no difference, but it's
better to be consistent.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Arnout: keep --disable-libstdcxx-pch and better explanation for
--disable-initfini-array]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add support to binutils-bare-metal to support multiple architecture tuples
with the BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH string.
To do this, custom configure, build and install commands are needed, so that
each step goes through a loop of the architecture tuples in the list.
To keep consistency with autotools, all the relevant host configurations have
been copied into the HOST_BINUTILS_BARE_METAL_CONF_OPTS while removing any
configurations that do not apply to binutils and removing redundant configs.
autotools redundant configs covered by $(HOST_CONFIGURE_OPTS):
CFLAGS="$$(HOST_CFLAGS)"
LDFLAGS="$$(HOST_LDFLAGS)"
autotools configs not applicable to binutils:
--disable-gtk-doc
--disable-gtk-doc-html
--disable-doc
--disable-docs
--disable-documentation
--disable-debug
--with-xmlto=no
--with-fop=no
--disable-nls
One of the configurations already in the binutils-bare-metal package was not
needed.
--enable-static -> handled by --disable-shared
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Buildroot commit [1] bumped sqlite to 3.49.0, and commit [2] fixed the
package infra. But if the toolchain does not have C++ support enabled,
the following error will occur.
Error: failed to find: no
The reason was CXX has been set to 'no' in the package/Makefile.in file.
ifneq ($(BR2_INSTALL_LIBSTDCPP),y)
TARGET_CONFIGURE_OPTS += CXX=no
endif
Then the autosetup script will look for a required path ('no' above),
and will exit with an error if not found.
To solve it, we can set CXX to 'false' instead of 'no', so that the
autosetup script will skip checking for a C++ compiler.
Fixes:
https://autobuild.buildroot.org/?reason=sqlite-3.49.0https://autobuild.buildroot.org/results/569a3750681cc10688ac663450dc2773a317bb07/
[1] db85638cea
[2] a93680be30
Signed-off-by: Scott Fan <fancp2007@gmail.com>
[Julien: add a link to an actual build failure]
Signed-off-by: Julien Olivain <ju.o@free.fr>
The autosetup script will skip checking for readline.h when cross-compiling,
which will cause line-editing support for the sqlite3 shell to always be "none".
In this case, if the --editline option is provided, an error will be reported:
ERROR: Explicit --editline failed to find a matching library.
However, we can enable readline or editline support by specifying the CFLAGS
and LDFLAGS values instead of having it handled automatically by the
autosetup configure script.
In addition, the libedit package actually depends on the ncurses package,
just like the readline package. So when using the libedit package,
also add the ncurses dependency.
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Use the latest upstream verified commit.
Also fixes multiple issues like:
https://autobuild.buildroot.org/results/fe33a0d9cfa242cbcda0c5fb759b84efc6662097
that were due to the usage of OpenSSL deprecated routines
(ERR_remove_state and ENGINE_cleanup)
The build failure happen since Buildroot commit [1] "package/httping:
update to latest git" and when BR2_PACKAGE_HTTPING_SSL=y.
[1] 1c2fa85cb1
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
[Julien:
- remove test-pkg result from commit log,
- add info on the failure
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Updating the hash of the WHENCE file, due to firmware additions and
firmware changes, but no changes to the redistribution/licensing
conditions.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since Buildroot commit [1] "package/python-evdev: bump to version
1.8.0", python-evdev is failing to build with error:
evdev/ecodes.c: In function 'PyInit__ecodes':
evdev/ecodes.c:65:29: error: 'BUS_AMD_SFH' undeclared (first use in this function)
65 | PyModule_AddIntMacro(m, BUS_AMD_SFH);
| ^~~~~~~~~~~
/home/autobuild/autobuild/instance-8/output-1/build/python3-3.12.8/Include/modsupport.h:61:70: note: in definition of macro 'PyModule_AddIntMacro'
61 | #define PyModule_AddIntMacro(m, c) PyModule_AddIntConstant((m), #c, (c))
| ^
...
Upstream commit [2] included in this version fixes issues when
building wheels.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/9085451384
- https://autobuild.buildroot.org/results/61a3b74e60f2f0f93e312803812ab4d98c492599/
- and many others...
[1] 455ef44d26
[2] 3ff9816e08
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[Julien: reworded the commit log to add extra info]
Signed-off-by: Julien Olivain <ju.o@free.fr>
