The command "make show-build-order" doesn't show dependencies of rootfs-common target.
This patch adds $(ROOTFS_COMMON_DEPENDENCIES) to PACKAGES variable.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When adding the custom BR2_WGET value in the configuration,
genrandconfig forgets to add a newline. Due to this, the next option
that is added is printed on the same line as BR2_WGET="", which causes
it to be ignored.
Due to this, in all builds, the line right after BR2_WGET was
ignored. It could have been BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX,
BR2_INIT_SYSTEMD, BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV,
BR2_STATIC_LIBS or BR2_PACKAGE_PYTHON_PY_ONLY depending on the
randomization.
Fix that by adding a proper newline at the end of the BR2_WGET option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure.ac script uses PKG_CHECK_MODULES(), and we autoreconf
the package, so host-pkgconf should be listed in the dependencies.
This issue is seen either with per-package folders, or by doing a
clean build with just "make openocd":
>>> openocd 0.10.0 Configuring
>>> openocd 0.10.0 Autoreconfiguring
[...]
configure.ac:12: error: possibly undefined macro: AC_MSG_WARN
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:201: error: possibly undefined macro: AC_DEFINE
configure.ac:582: error: possibly undefined macro: AC_MSG_NOTICE
Even if the message seems unrelated, it's really the lack of pkg.m4
from host-pkgconf that causes the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libassuan library installs libassuan-config, but it is not
currently fixed up by our <pkg>_CONFIG_SCRIPTS logic. While this
doesn't cause any problem today, it fails badly with per-package
folders, so let's use <pkg>_CONFIG_SCRIPTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- changes since 1.16.1
0f68a3f6 configure: build without BPF support in ir-keytable
5f8bd4e8 keytable: fix compilation warning
f735bee7 keytable: fix BPF protocol compilation on mips
c393c3bc Prepare for 1.16.2 release
- use new '--disable-bpf' option instead of ac_cv_prog_CLANG
to disable BPF support, fixes [1]:
bpf.c:48:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
- remove upstream denied patch (see [2]) fixing part of the BPF support
for older toolchains
[1] http://autobuild.buildroot.net/results/32b8f63e84616f91b645230e889eb1518972a398
[2] https://www.spinics.net/lists/linux-media/msg142729.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When /etc/selinux/semanage.conf does not exist, libsemanage tries to
overwrite it. For the target package, it works fine because $(DESTDIR)
is taken into account.
However, for the host package, $(DESTDIR) is empty, and the location
used for /etc/selinux/semanage.conf is not affected by $(PREFIX). This
causes host-libsemanage to try to install /etc/selinux/semanage.conf,
which obviously fails with:
test -f /etc/selinux/semanage.conf || install -m 644 -D semanage.conf /etc/selinux/semanage.conf
install: cannot create directory '/etc/selinux': Permission denied
To fix this, this commit passes DEFAULT_SEMANAGE_CONF_LOCATION in the
make options when building/installing host-libsemanage, providing a
path to semanage.conf that Buildroot can write to.
Fixes:
http://autobuild.buildroot.net/results/cd27e3c66274622d0c3dd5a601a36efb1bc45011/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The xlib_libfontenc configure.ac uses PKG_CHECK_MODULES(), but the
Buildroot package does not have a dependency on host-pkgconf. This
causes a build failure with per-package host/target folders, or if one
builds just with "make xlib_libfontenc", which is why it was never
detected by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-16062: dwarf_getaranges in dwarf_getaranges.c in libdw in elfutils
before 2018-08-18 allows remote attackers to cause a denial of service
(heap-based buffer over-read) via a crafted file.
CVE-2018-16402: libelf/elf_end.c in elfutils 0.173 allows remote attackers
to cause a denial of service (double free and application crash) or possibly
have unspecified other impact because it tries to decompress twice.
CVE-2018-16403: libdw in elfutils 0.173 checks the end of the attributes
list incorrectly in dwarf_getabbrev in dwarf_getabbrev.c and dwarf_hasattr
in dwarf_hasattr.c, leading to a heap-based buffer over-read and an
application crash.
For more details, see the announcement:
https://sourceware.org/ml/elfutils-devel/2018-q3/msg00116.html
0.172 and 0.173 also included fixes for crashes and hangs found by afl-fuzz
(no CVEs assigned):
https://sourceware.org/ml/elfutils-devel/2018-q2/msg00272.htmlhttps://sourceware.org/ml/elfutils-devel/2018-q2/msg00209.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2018-12384: NSS responded to an SSLv2-compatible ClientHello with a
ServerHello that had an all-zero random.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 118534fe54 (fs: use a common tarball as base for the other
filesystems), the filesystem creation is split in two steps, using an
intermediate tarball to carry the generic, common finalisations to the
per-filesystem finalisation and image creation.
However, this intermediate tarball causes an issue with capabilities:
they are entirely missing in the generated filesystems.
Capabilities are stored in the extended attribute security.capability,
which tar by default will not store/restore, unless explicitly told to,
e.g. with --xattrs-include='*', which we don't pass.
Now, passing this option when creating and extracting the intermediate
tarball, both done under fakeroot, will cause fakeroot to report an
invalid filetype for files with capabilities. mksquashfs would report
such unknown files as a warning, while mkfs.ext2 would fail (with a
similar error message), e.g.:
File [...]/usr/sbin/getcap has unrecognised filetype 0, ignoring
This is due to a poor interaction between tar and fakeroot; running as
root the exact same commands we run under fakeroot, works as expected.
Unfortunately, short of fixing fakeroot (which would first require
understanding the problem in there), we don't have much options.
The intermediate tarball was made to avoid redoing the same actions over
and over again for each filesystem to build. However, most of the time,
only one or two such filesystems would be enabled [0], and those actions
are usually pretty lightweight. So, using an intermediate tarball does
not provide a big optimisation.
The main reason to introduce the intermediate tarball, however, is that
it allows to postpone per-filesystem finalisations to be applied only
for the corresponding filesystem, not for all of them.
So, we get rid of the intermediate tarball, and simply move all of the
code to run under fakeroot to the per-filesystem fakeroot script.
Instead of extracting the intermediate tarball, we just rsync the
original target/ directory, and apply the filesystem finalisations on
that copy. The only thing still done in the rootfs-common step is to
generate the intermediate files (users file, devices file) that are used
in the fakeroot script.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11216
Note: an alternate solution would have been to keep the intermediate
tarball to keep most of the common finalisations, and move only the
permissions to each filesystem, but that was getting a bit more complex
and changed the ordering of permissions and post-fakeroot scripts. Once
we bite the bullet of having some common finalisation done in each
filesystem, it's easier to just move all of them.
[0] Most probsably, users would enable the real filesystem to put on
their device, plus the 'tar' filesystem, to be able to easily inspect
the content on their development machine.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
meson-based build of systemd runs a couple of checks on the structure
of the *host* system which will incorrectly configure systemd if build
host configuration doesn't match Buildroot target.
One can also find the following in the NEWS file:
* A new -Dsplit-bin= build configuration switch may be used to specify
whether bin and sbin directories are merged, or if they should be
included separately in $PATH and various listings of executable
directories. The build configuration scripts will try to autodetect
the proper values of -Dsplit-usr= and -Dsplit-bin= based on build
system, but distributions are encouraged to configure this
explicitly.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replace $(BR2_KERNEL_MIRROR) by https://git.kernel.org/pub, which
fixes the download of this package:
>>> trace-cmd trace-cmd-v2.6.1 Downloading
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
Removing it and starting afresh.
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
This is the second time in a row; bailing out
--2018-11-11 21:08:00-- http://sources.buildroot.net/trace-cmd/trace-cmd-trace-cmd-v2.6.1.tar.gz
Resolving sources.buildroot.net (sources.buildroot.net)... 104.25.210.19, 104.25.211.19, 2606:4700:20::6819:d313, ...
Connecting to sources.buildroot.net (sources.buildroot.net)|104.25.210.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1859835 (1.8M) [application/x-gtar-compressed]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 0.15.0, qemu has an optional dependency to opengl:
20ff075bb3
Since version 2.4, libepoxy is also needed to enable opengl:
dcf30025c3
As a result if libepoxy is built before qemu, opengl support will be
detected (see config.log):
OpenGL support yes
OpenGL dmabufs yes
This will raise the failures in milkymist-tmu2:
hw/display/milkymist-tmu2.c:35:22: fatal error: X11/Xlib.h: No such file or directory
or in sdl2:
CC /home/peko/autobuild/instance-0/output/targetui/sdl2-2d.o
In file included from /home/peko/autobuild/instance-0/output/build/qemu-2.12.1/include/ui/egl-context.h:5:0,
from ui/egl-context.c:3:
/home/peko/autobuild/instance-0/output/build/qemu-2.12.1/include/ui/egl-helpers.h:45:55: error: unknown type name 'Window'; did you mean 'minor'?
or in translate-a64:
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/target/arm/translate-a64.c: In function 'handle_shri_with_rndacc':
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/target/arm/translate-a64.c:7000:28: warning: 'tcg_src_hi' may be used uninitialized in this function [-Wmaybe-uninitialized]
tcg_gen_mov_i64(tcg_src, tcg_src_hi);
^
../ui/gtk-egl.o: In function `gd_egl_init':
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/ui/gtk-egl.c:52: undefined reference to `gdk_x11_window_get_xid'
So, for the time being, disable opengl as done in xen since commit
13c6754f3c.
Fixes:
- http://autobuild.buildroot.org/results/656e45721c72197834462eb2bd8c762e520725a4
- http://autobuild.buildroot.org/results/d4736a930144fc5e25b377bc1c0baf44fbf8718d
- http://autobuild.buildroot.org/results/50e0d7d1b4f5c2b827b50bb82d8fbc066bf31118
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note, that there is already a patch [1] to bump the version to 0.48.1.
However, the bump to version 0.48.x has some unresolved issues.
In the meantime, until the issue with 0.48 is resolved, bump to latest
version of the 0.47 branch.
[1] http://patchwork.ozlabs.org/patch/986260/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Initially we had a port only for ARCv2 cores but then with a simple
change ARCompact cores got supported as well.
So we generalize from BR2_archs to BR2_arcle as we haven't tried to
get glibc working on big-endian ARCs yet.
Also we never bothered to check avaialbility of atomic instructions in
the core but in case of Glibc for ARC this is really a must, so we add
this check here.
Note in case of uClibc we may have system w/o HW atomics but:
1. Only single-core systems are allowed
2. Atomic instructions are emulated via arc_usr_cmpxchg syscall
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes SQUID-2018_4:
Due to incorrect input handling, Squid is vulnerable to a Cross-Site
Scripting vulnerability when generating HTTPS response messages about TLS
errors.
For more details, see the advisory:
http://www.squid-cache.org/Advisories/SQUID-2018_4.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xtensa-uclinux uses bFLT executable file format that cannot relocate
fields representing offsets from data to code. C++ objects built as PIC
use offsets to encode FDE structures. As a result C++ exception handling
doesn't work correctly on xtensa-uclinux. Don't use PIC by default on
xtensa-uclinux.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bump to 2.4.48 introduced a bug that, according to the author,
only happen in certain cases on glibc. But under uclibc-ng, it happens
every time.
The bug essentially cause any program calling any libattr.so function
to enter an infinite recursion, because of a symbol conflict between
uclibc-ng and libattr wrappers, that causes the libattr wrappers to
call themselves.
This infinite recursion does not consume the stack, so programs
basically behave like they enter an infinite loop.
It is easy to reproduce with qemu_arm_versatile_defconfig +
BR2_PACKAGE_ATTR: "getfattr ." never returns and takes 100% CPU.
Upstream fixed it, but the patch is not part of a release yet,
so take the patch.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
