As we recently did for U-Boot, disable checking hashes for custom
versions of barebox.
Note that we currently have no hash file for barebox, but avoiding the
check will already be in place when we do add it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For custom tarballs, it's quite obvious we can not check hashes.
For custom versions, that's not so obvious. One might think we could
have hashes for all the official releases, but that's not possible: if
the user uses a released version of Buildroot (say 2015.05) much later
in the future, and wants to use the then-released 2038.02 U-Boot. It now
seems pretty obvious that Buildroot 2015.02 can't know the hash for
U-Boot 2038.02.
So, disable checking the hash for custom tarballs and custom versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vincent Stehle <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, assigning to BR_NO_CHECK_HASH_FOR but referencing variable
assigned to later, fails. Here's a failing test-case, which is the
reduced test-case of how we handle BR_NO_CHECK_HASH_FOR for now (warning
added for test-case):
export BR_NO_CHECK_HASH_FOR
BR_NO_CHECK_HASH_FOR += $(XENOMAI_SOURCE)
XENOMAI_VERSION = 2.6.4
XENOMAI_SOURCE = xenomai-$(XENOMAI_VERSION).tar.bz2
$(warning BR_NO_CHECK_HASH_FOR='$(BR_NO_CHECK_HASH_FOR)')
all:
Run it with simply make:
$ make
BR_NO_CHECK_HASH_FOR=' '
Now, change the first line to read:
export BR_NO_CHECK_HASH_FOR =
And we now get:
$ make
BR_NO_CHECK_HASH_FOR=' xenomai-2.6.4.tar.bz2'
This new behaviour will be needed later for Xenomai, which handles the
version string in an unusual way, so we can exclude its custom versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CONFIGURE_OPTS is a superset of HOST_MAKE_ENV, so there is no need to
pass them both. Also use HOST_CONFIGURE_OPTS for the install step for
consistency, and finally, add host-pkgconf to _DEPENDENCIES as it is
explicitly used (currently gets pulled in by host-libusb though).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now network-manager depends on glibc, there is no need anymore for the
wchar and threads dependencies (implied by glibc). So remove them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This host package allows to build tools to download and execute code on
Freescale i.MX5/i.MX6 and Vybrid SoCs through the Serial Download
Protocol.
The work behind this commit was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Install a custom php-fpm.conf instead of the stock one.
- Listening on /var/run/php-fpm.sock instead of TCP port so we can
restrict access to webserver user www-data.
- Using ondemand pm, so PHP children are only started after a PHP
request, instead of kept resident all the time.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 53903a15 (*config: improve handling of BR2_LEGACY) added an
option to entirely skip legacy entries, by passing a variable in the
environment.
However, it missed one location where that variable is also needed,
which is generating the list of packages and deprecated features for
inclusion in the manual.
Fix that by re-using the global $(COMMON_CONFIG_ENV) variable,
overriding just what we don't want (i.e. br2-external location and
defconfig path).
Also, slightly re-order variables so the ones we override come right
after the common settings, moving the specific ones at the end, one
variable per line.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xorg driver for imx6. Inspired from Yocto project.
I did not find any problem, but notice Yocto project force Xorg xserver
1.14.4 while we use 1.16.
Notice Vivante driver should be able to provide Desktop OpenGL implementation.
However, this feature seems broken for a while[1]. Yocto use Mesa3D/swraster
to provide Desktop OpenGL API[2].
[1] http://comments.gmane.org/gmane.linux.embedded.yocto.meta-freescale/8253
[2] See recipes-graphics/xorg-driver/xf86-video-imxfb-vivante_3.10.17-1.0.1.bb
in meta-fsl-arm layer
Tested with:
subsequent qt5base and libdrm fixes +
QMX6 board +
BR2_ARM_EABIHF= both tested
BR2_ARM_ENABLE_NEON=y
BR2_ARM_FPU_NEON=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.congatec.com/arm/qmx6_kernel.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="9bafbcba67f7bb2a48a5e05998cecb1165aa444f"
BR2_LINUX_KERNEL_DEFCONFIG="qmx6"
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-qmx6"
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_LICENSE_APPROVED=y
BR2_PACKAGE_QT5BASE_EXAMPLES=y
BR2_PACKAGE_QT5BASE_OPENGL_ES2=y
BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
BR2_PACKAGE_QT5BASE_XCB=y
BR2_PACKAGE_QT5BASE_DEFAULT_QPA="xcb"
BR2_PACKAGE_QT5BASE_GIF=y
BR2_PACKAGE_QT5BASE_JPEG=y
BR2_PACKAGE_QT5BASE_PNG=y
BR2_PACKAGE_QT5QUICKCONTROLS=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_EVDEV=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV=y
BR2_PACKAGE_FREESCALE_IMX=y
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y
BR2_PACKAGE_GPU_VIV_BIN_MX6Q=y
BR2_PACKAGE_GPU_VIV_BIN_MX6Q_EXAMPLES=y
[Thomas:
- license is GPLv2+ and not GPLv2
- use full destination path when using $(INSTALL), and use -D option.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
merge
To compile with Vivante header and use framebuffer, it is necessary to
pass option -DEGL_API_FB. This option is declared in pkg-config file of
Vivante library. But many packages (especialy qt5 components) does not
consider these flags.
So instead of patching every packages that use EGL, it is more
convenient to patch Vivante headers.
This commit add #define EGL_API_FB on top of eglvivante.h when
necessary.
[Thomas: fix syntax error.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thus, it is possible to force compilation of Gallium/DRI support in
mesa3d even if no Gallium/DRI drivers are selected. This is intended to
be used by external OpenGL provider (especialy further imx6 support).
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 1.1.6, the mips softfloat toolchains are merged into the mips
toolchain using multilib. Our external toolchain infrastructure copies
the correct version to the target depending on the BR2_SOFT_FLOAT
option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add hashes for all musl toolchains, including the ones that we
currently don't support (arm hf, sh4, x86_64-x32).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For Linaro toolchains, a special post install staging hook is used to
create two symlinks needed for the dynamic loader to find the
libraries. However, the way the link is created prevents a 'make
toolchain-external-reinstall' from succeeding, because the symlink
already exists and points to a directory:
ln -sf . /home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf
ln: '/home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf/.': cannot overwrite directory
This commit adjust the hook to pass the '-n' option so that the link
name is treated as a normal file if it is a symbolic link to a
directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This uClibc toolchain does not provide an appropriate uClibc
configuration for Buildroot: missing IPv6, missing nsl stub, missing
program invocation, etc. Therefore, we mark it as broken, waiting for
a new upstream release of a new toolchain.
We keep around the toolchain-external Synopsys code anyway, since it
will most likely be identical for the new toolchain version. However,
we remove all the quirks that were introduced to start work around
issues related to this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
