libcurl doesn't find any trust path for CA certs when it cross-compiles.
When using OpenSSL, it is explicitly configured to use the SSL cert
directory with OpenSSL style hash files in it. But with GnuTLS, it gets
nothing.
Rather than configure libcurl to use the OpenSSL directory or a bundle
file, configure it to use the GnuTLS default. This way the CA certs
path can be configured in one place (gnutls) and then libcurl and anyone
else who uses gnutls can default to that.
Also, when libcurl with gnutls is configured to use a directory, it ends
up loading each cert three times.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 43b4d3ae45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gnutls is building with no default location to look for CA certs. Since
there are buildroot packages to provide these, configure it to use them
by default.
Configure gnutls to find them using the bundle file which contains all
certs, rather than looking in the cert directory. When gnutls is told
to use the directory, it loads *every* file in it. This means it loads
the bundle with all certs, then loads each cert a second time using the
individual pem files, and then loads them all the third time via the
hash symlinks to the pem files.
When p11-kit is enabled, use its trust module instead of the bundle
file. p11-kit can be configured to use the bundle (the default), but it
can do other things too, such as integrate with the "trust" command for
adding and removing trust anchors.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 379306e8f2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fstatfs/statfs on aarch64 seems broken, add a patch from uClibc-ng
upstream git to fix it.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2179ca4a61)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
CVE-2018-19591: A file descriptor leak in if_nametoindex can lead to a
denial of service due to resource exhaustion when processing getaddrinfo
calls with crafted host names. Reported by Guido Vranken.
Adhemerval Zanella (2):
Fix misreported errno on preadv2/pwritev2 (BZ#23579)
x86: Fix Haswell CPU string flags (BZ#23709)
Alexandra Hájková (1):
Add an additional test to resolv/tst-resolv-network.c
Andreas Schwab (1):
libanl: properly cleanup if first helper thread creation failed (bug 22927)
Florian Weimer (3):
preadv2/pwritev2: Handle offset == -1 [BZ #22753]
conform: XFAIL siginfo_t si_band test on sparc64
CVE-2018-19591: if_nametoindex: Fix descriptor for overlong name [BZ #23927]
Ilya Yu. Malakhov (1):
signal: Use correct type for si_band in siginfo_t [BZ #23562]
Martin Kuchta (1):
pthread_cond_broadcast: Fix waiters-after-spinning case [BZ #23538]
Stefan Liebler (2):
Fix segfault in maybe_script_execute.
Fix race in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP [BZ #23275]
Szabolcs Nagy (1):
i64: fix missing exp2f, log2f and powf symbols in libm.a [BZ #23822]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2018-17961: Artifex Ghostscript 9.25 and earlier allows attackers to
bypass a sandbox protection mechanism via vectors involving errorhandler
setup. NOTE: this issue exists because of an incomplete fix for
CVE-2018-17183.
- CVE-2018-18284: Artifex Ghostscript 9.25 and earlier allows attackers to
bypass a sandbox protection mechanism via vectors involving the 1Policy
operator.
- CVE-2018-19409: An issue was discovered in Artifex Ghostscript before
9.26. LockSafetyParams is not checked correctly if another device is
used.
- CVE-2018-19475: psi/zdevice2.c in Artifex Ghostscript before 9.26 allows
remote attackers to bypass intended access restrictions because available
stack space is not checked when the device remains the same.
- CVE-2018-19476: psi/zicc.c in Artifex Ghostscript before 9.26 allows
remote attackers to bypass intended access restrictions because of a
setcolorspace type confusion.
- CVE-2018-19477: psi/zfjbig2.c in Artifex Ghostscript before 9.26 allows
remote attackers to bypass intended access restrictions because of a
JBIG2Decode type confusion.
For more details, see the release notes:
https://www.ghostscript.com/doc/9.26/History9.htm#Version9.26
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e52b02677a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
*) Microarchitecture timing vulnerability in ECC scalar multiplication
OpenSSL ECC scalar multiplication, used in e.g. ECDSA and ECDH, has been
shown to be vulnerable to a microarchitecture timing side channel attack.
An attacker with sufficient access to mount local timing attacks during
ECDSA signature generation could recover the private key.
This issue was reported to OpenSSL on 26th October 2018 by Alejandro
Cabrera Aldaya, Billy Brumley, Sohaib ul Hassan, Cesar Pereida Garcia and
Nicola Tuveri.
(CVE-2018-5407)
[Billy Brumley]
*) Timing vulnerability in DSA signature generation
The OpenSSL DSA signature algorithm has been shown to be vulnerable to a
timing side channel attack. An attacker could use variations in the signing
algorithm to recover the private key.
This issue was reported to OpenSSL on 16th October 2018 by Samuel Weiser.
(CVE-2018-0734)
[Paul Dale]
For more information, see the changelog:
https://www.openssl.org/news/cl102.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3301b6e1b2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PLATFORM is an environment variable used by xfsprogs' configure script
to determine the platform for which the applications are being built. If
we set some incorrect/unsupported value through e.g: export, this will
be picked up by xfsprogs' configure script and used as-is and assigned
to PKG_PLATFORM, which will lead to build failures.
If PLATFORM was empty/unset, then uname on the host building xfsprogs
gets used to determine the build platform, which again could be
incorrect if we e.g: built xfsprogs on a Darwin system.
Since we are obviously building for Linux, let's just make sure we
define it that way which solves both issues.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 257a2118be)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2018-14629:
All versions of Samba from 4.0.0 onwards are vulnerable to infinite
query recursion caused by CNAME loops. Any dns record can be added via
ldap by an unprivileged user using the ldbadd tool, so this is a
security issue.
- CVE-2018-16841:
When configured to accept smart-card authentication, Samba's KDC will call
talloc_free() twice on the same memory if the principal in a validly signed
certificate does not match the principal in the AS-REQ.
This is only possible after authentication with a trusted certificate.
talloc is robust against further corruption from a double-free with
talloc_free() and directly calls abort(), terminating the KDC process.
There is no further vulnerability associated with this issue, merely a
denial of service.
- CVE-2018-16851:
During the processing of an LDAP search before Samba's AD DC returns
the LDAP entries to the client, the entries are cached in a single
memory object with a maximum size of 256MB. When this size is
reached, the Samba process providing the LDAP service will follow the
NULL pointer, terminating the process.
There is no further vulnerability associated with this issue, merely a
denial of service.
- CVE-2018-16853:
A user in a Samba AD domain can crash the KDC when Samba is built in the
non-default MIT Kerberos configuration.
With this advisory we clarify that the MIT Kerberos build of the Samba
AD DC is considered experimental. Therefore the Samba Team will not
issue security patches for this configuration.
For more details, see the release notes:
https://www.samba.org/samba/history/samba-4.8.7.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tests are enabled if gperf and zlib are found and they fail on:
/home/buildroot/autobuild/run/instance-0/output/build/msgpack-2.1.5/include/msgpack/v1/object.hpp:652:34:
error: 'void* memcpy(void*, const void*, size_t)' copying an object of non-trivial type 'struct msgpack::v2::object' from an array of 'const msgpack_object' {aka 'const struct msgpack_object'} [-Werror=class-memaccess]
std::memcpy(&o, &v, sizeof(v));
So disable them.
Fixes:
- http://autobuild.buildroot.org/results/7d7aa9723f02f9bc78dbf6248674be4d402199bf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d2d75e07db)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libid3tag uses a very old configure script.
When the toolchain lacks C++ and the build machine lacks /lib/cpp, this
old configure script fails because it can't find a C++ preprocessor that
is valid:
checking for arm-buildroot-linux-uclibcgnueabi-g++... no
checking whether we are using the GNU C++ compiler... no
checking whether no accepts -g... no
checking dependency style of no... none
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.
This is yet another case that was tentatively fixed by bd39d11d2e
(core/infra: fix build on toolchain without C++), further amended by
4cd1ab1588 (core: alternate solution to disable C++).
However, this only works on libtool scripts that are recent enough, and
thus we need to autoreconf to get it.
We also need to patch configure.ac so that it does not fail on the
missing, GNU-specific files: NEWS, AUTHORS, and Changelog.
Fixes:
http://autobuild.buildroot.org/results/ac3/ac3870208aab6001db6b790b6c5dde64d08f7669/http://autobuild.buildroot.org/results/cc1/cc18397f38dfd4f1e6605f7a6f58edab49b396ac/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 43274dd3e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains security fixes for CVE-2018-4345, CVE-2018-4372,
CVE-2018-4373, CVE-2018-4375, CVE-2018-4376, CVE-2018-4378,
CVE-2018-4382, CVE-2018-4386, CVE-2018-4392, and CVE-2018-4416.
Additionally, it fixes a few build failures, and a crash when using
certain version of Cairo.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/11/21/webkitgtk2.22.4-released.html
More details on the issues covered by security fixes can be found
in the corresponding security advisory:
https://webkitgtk.org/security/WSA-2018-0008.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7a827a17dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build of package will sometime fails because of the following issue:
install-static target has two dependencies: dispatcher-static and
install-common
Because dispatcher-static is not a file but only a target, it will
always be called to build usb_modeswitch_dispatcher.
So, even if install-common depends on usb_modeswitch_dispatcher, in some
rare cases, install-static won't be able to install
usb_modeswitch_dispatcher because it is being rebuild by
dispatcher-static
To fix this issue, disable parallel build
Fixes:
- http://autobuild.buildroot.org/results/8297be35725b816ff5afaf909605ceb41223efb6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a554109af8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Graphviz' dot utility does not like nodes which names does not start
with an ^[[:alpha:]], i.e. 18xx-ti-utils would cause grievance:
Warning: syntax ambiguity - badly delimited number '18x' in line 4 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 5 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 6 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 7 [...]/graph-depends.dot splits into two tokens
Prefix nodes with an underscore to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 020206ca57)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Checking for the existence of the dtc binary built by the
non-dependent dtc package may cause instable behaviour when giving more
freedom on the order of how the packages are built (parallelization).
In addidion, when moving to per-package host/target method, the check
would always trigger in the isolated host, leading to linux-dtc always
being installed as dtc.
This in turn may lead to undesired overwriting of the real host-dtc binary
when finally assembling the global host dir.
Thus rework the linux-dtc install condition to be defined by configuration
rather than compile time order.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 860906ee05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The U-Boot part of the defconfig was not specifying explicitly any
U-Boot version. Since commit 21e3ae8a18
("boot/uboot: default to kconfig buildsystem for latest version"), we
default to using the kconfig build system when the default U-Boot
version is used. Following this change, the apf27 defconfig therefore
started using kconfig, for which the BR2_TARGET_UBOOT_BOARDNAME
Config.in option is not used. Due to this, the build fails with:
boot/uboot/uboot.mk:411: *** No board defconfig name specified, check your BR2_TARGET_UBOOT_BOARD_DEFCONFIG setting. Stop.
Indeed, when Kconfig is used, the board defconfig must be specified
with BR2_TARGET_UBOOT_BOARD_DEFCONFIG.
As part of fixing this, we also set a fixed U-Boot version for this
defconfig, like we do in all other defconfigs.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771003
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a8aaee72a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, tar will not include any extended attribute (xattr) when
creating archives, and thus will not store capabilties either (as they
are stored in the xattr 'security.capability').
Using option --xattrs is enough to create a tarball with all the xattrs
attached to a file. However, extracting all xattrs from a tarball
requires that --xattrs-include='*' be used. This is not symetric (but on
purpose, as per the documentation), and so is confusing to some.
So, we use --xattrs-include='*' to create the archive, so as to be
explicit that we want all xattrs to be stored.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6d688e2132)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 4adaa581b2, S29netplug looks for
/etc/default/network instead of /etc/sysconfig/network. When this
file exists but does not define $NETWORKING, the script fails on line
29 with something like:
/etc/init.d/S29netplug: 29: [: =: unexpected operator
Fix quoting so this error no longer happens.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
[Thomas: keep double quotes around "no", keep curly braces when
referencing the variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5682ba9363)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commands like "make show-build-order" or "make
<package>-show-build-order" show the build order and then print
"make[1]: Nothing to be done for 'show-build-order'" to stdout. It
pollutes output. Technically this message is true but it's not true
for user because he gets an information.
The <package>-show-build-order targets use $(info) for package name
printing. The make utility doesn't consider the internal directive as
a command so it think that it's "Nothing to be done". The patch adds
the empty command to <package>-show-build-order to inform make utility
that taget makes some real actions.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: invert $(info) and @:, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 75c81a12f6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e7af4033c3 ("rpm: use the new
gettext logic") introduced a really nasty bug: by adding
$(TARGET_NLS_DEPENDENCIES) to RPM_DEPENDENCIES, it completely
overwrote the existing value of RPM_DEPENDENCIES, entirely masking all
mandatory RPM dependencies.
rpm is fairly towards the end of the alphabet, and most other
mandatory dependencies (berkeleydb, host-pkgconf, file and popt)
appear earlier by alphabetic ordering. Only zlib was afterwards, but
since file depends on zlib, it was always built before. This probably
explains why our autobuilders haven't encountered a single build
failure.
However, a simple "make rpm" clearly exhibits the failure, and
obviously the upcoming per-package folder mechanism makes such bugs
even more obvious.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 36385f87f3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When $(TOPDIR)/dl is a symlink, checking out git submodules can fail,
as reported by Michael in #11086.
To reproduce a similarly-related mis-behaviour:
$ mkdir -p foo/bar foo/buz
$ cd foo/bar
$ ln -s ../buz meh
$ cd meh
$ cd ../../foo
The last command should not succeed, because, relative to meh, there is
no ../../foo directory; we would expect it to be ../../../foo, instead.
But since meh is a symlink to a directory, then a relative path from that
symlink is interpreted as relative to the derefrenced directory, i.e.
from buz in this case.
But where this gets even weirder, is that, if the last command is
replaced by:
$ cd ../../../foo
then it still works, too.
And that is the root of Michael's issue: the dl directory in Buildroot's
TOPDIR is a symlink to a similarly-named directory one directory higher,
which then confuses relative paths, which gets especially and noticeably
bad for git submodules.
Avoid this strangeness, and just use so-called "physical" path, i.e. a
path where all symlinks to directories have been dereferenced.
Fixes: #11086
Reported-by: Michael Nosthoff <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Michael Nosthoff <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 632e164a19)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The command "make show-build-order" doesn't show dependencies of rootfs-common target.
This patch adds $(ROOTFS_COMMON_DEPENDENCIES) to PACKAGES variable.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 305e4487e5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When adding the custom BR2_WGET value in the configuration,
genrandconfig forgets to add a newline. Due to this, the next option
that is added is printed on the same line as BR2_WGET="", which causes
it to be ignored.
Due to this, in all builds, the line right after BR2_WGET was
ignored. It could have been BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX,
BR2_INIT_SYSTEMD, BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV,
BR2_STATIC_LIBS or BR2_PACKAGE_PYTHON_PY_ONLY depending on the
randomization.
Fix that by adding a proper newline at the end of the BR2_WGET option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3eb49f59d6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure.ac script uses PKG_CHECK_MODULES(), and we autoreconf
the package, so host-pkgconf should be listed in the dependencies.
This issue is seen either with per-package folders, or by doing a
clean build with just "make openocd":
>>> openocd 0.10.0 Configuring
>>> openocd 0.10.0 Autoreconfiguring
[...]
configure.ac:12: error: possibly undefined macro: AC_MSG_WARN
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:201: error: possibly undefined macro: AC_DEFINE
configure.ac:582: error: possibly undefined macro: AC_MSG_NOTICE
Even if the message seems unrelated, it's really the lack of pkg.m4
from host-pkgconf that causes the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 915c136c5c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When /etc/selinux/semanage.conf does not exist, libsemanage tries to
overwrite it. For the target package, it works fine because $(DESTDIR)
is taken into account.
However, for the host package, $(DESTDIR) is empty, and the location
used for /etc/selinux/semanage.conf is not affected by $(PREFIX). This
causes host-libsemanage to try to install /etc/selinux/semanage.conf,
which obviously fails with:
test -f /etc/selinux/semanage.conf || install -m 644 -D semanage.conf /etc/selinux/semanage.conf
install: cannot create directory '/etc/selinux': Permission denied
To fix this, this commit passes DEFAULT_SEMANAGE_CONF_LOCATION in the
make options when building/installing host-libsemanage, providing a
path to semanage.conf that Buildroot can write to.
Fixes:
http://autobuild.buildroot.net/results/cd27e3c66274622d0c3dd5a601a36efb1bc45011/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4c9c70453c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The xlib_libfontenc configure.ac uses PKG_CHECK_MODULES(), but the
Buildroot package does not have a dependency on host-pkgconf. This
causes a build failure with per-package host/target folders, or if one
builds just with "make xlib_libfontenc", which is why it was never
detected by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7b1238055c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-16062: dwarf_getaranges in dwarf_getaranges.c in libdw in elfutils
before 2018-08-18 allows remote attackers to cause a denial of service
(heap-based buffer over-read) via a crafted file.
CVE-2018-16402: libelf/elf_end.c in elfutils 0.173 allows remote attackers
to cause a denial of service (double free and application crash) or possibly
have unspecified other impact because it tries to decompress twice.
CVE-2018-16403: libdw in elfutils 0.173 checks the end of the attributes
list incorrectly in dwarf_getabbrev in dwarf_getabbrev.c and dwarf_hasattr
in dwarf_hasattr.c, leading to a heap-based buffer over-read and an
application crash.
For more details, see the announcement:
https://sourceware.org/ml/elfutils-devel/2018-q3/msg00116.html
0.172 and 0.173 also included fixes for crashes and hangs found by afl-fuzz
(no CVEs assigned):
https://sourceware.org/ml/elfutils-devel/2018-q2/msg00272.htmlhttps://sourceware.org/ml/elfutils-devel/2018-q2/msg00209.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6a74acb6fb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the po/ disable patch; not needed anymore.
Drop the __mempcpy compatibility patch; __mempcpy is not used anymore.
Refresh the -Werror removal patch; still needed, unfortunately.
Renumber the remaining patches.
Add GPLv3 license file.
Add license files hash.
[Peter: drop security reference, was added post-release]
Cc: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f0335b0cf7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
