When we do a release, we know only of a set of gcc versions that the
host may have. But in the future, distributions with newer gcc versions
may show up.
Currently, we do not recognise those versions, and thus we do as if they
were older than the oldest we know of. This means that a set of packages
become unselectable, when they should be.
We fix that by capping the detected version to the highest we know of.
Reported-by: gargar_ on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3950e69dad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt KMS support should not explicitly depend on the availability of opengl.
Don't explicitly disable KMS if opengl is not available and fallback to
detecting if libdrm is available before disabling kms.
The scenario where this is necessary involves using the Qt linuxfb backend
"dumb buffer" support via the DRM API. This is new in Qt 5.9 [1] and only
requires KMS, but not opengl. Although on Qt 5.6, only eglfs actually
uses libdrm/kms, it doesn't hurt to add the dependency and the -kms
option there as well, and doing so keeps the logic in the .mk file
simple.
[1] http://doc.qt.io/qt-5/embedded-linux.html#linuxfb
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f91ea94a6f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The utils/diffconfig script works only on variables with the BR2_
prefix. This is OK for Buildroot [def]configs since this is the prefix
for all user-facing variables, but it prevents using the same script
to compare configs from kconfig-based packages.
Remove the BR2_ restriction, allowing usage such as:
./utils/diffconfig \
board/qemu/xtensa-lx60/linux.config \
board/qemu/xtensa-lx60/linux-nommu.config
Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf9ccfc37b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libcilkrts configure script errors out with "Pthreads are required
to build libcilkrts" if the C library doesn't have thread support. To
fix that, we disable libcilkrts when thread support is not available.
This issue was not noticed until now, because we only regularly build
a no-thread toolchain for ARM, and libcilkrts was enabled on ARM only
starting in gcc 7.x.
This fixes the build of no-thread toolchains on architectures where
libcilkrts is supported, i.e x86/x86-64, ARM and Sparc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 076fd27da7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sort the certificates into alphabetical order so the contents of
ca-certificates.crt can be built reproducibly.
Note: The certificates are sorted uppercase then lowercase filenames
so the contents of ca-certificates.crt matches the source debian package.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c61b49e5b5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rebuilding ca-certificates using make ca-certificates-rebuild
caused duplicate certificates to be installed in the target. Its build
system is broken: it doesn't detect that the output file already exists,
and instead of overwriting it, a duplicate is generated under a
different name. The net effect is that all certificates are installed
twice after rebuild.
Fix this by cleaning the build directory before building the package.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 42b10634c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
c_rehash looks at all files in /etc/ssl/certs, generates the hash for
the certificates in them, and makes a symlink from the hash to the
certificate file.
However, ca-certificates.crt is also installed in /etc/ssl/certs and
it contains all the certificates. c_rehash will take one of them (the
first?) and create a symlink from that hash to ca-certificates.crt.
Usually, this results in an error like:
WARNING: Skipping duplicate certificate ca-certificates.crt
and all is well. However, depending on filesystem order,
ca-certificates.crt may come first, and the actual certificate is
not symlinked.
To fix this install certificates.crt to /etc/ssl/certs *after* we run
c_rehash to prevent it getting hashed by mistake.
Note: $(TARGET_DIR)/etc/ssl/certs/ is already removed during install so
this fix also works for rebuilds.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d07ddd8e4e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc does not build when the srcdir path contains a '@', because that
path is then substitued in a texi file as argument to an @include
directive. But then, the '@' in the path will start a command evaluation
of its own, thus breaking the build. For example, with a $(O) path set
to /home/ymorin/dev/buildroot/O/to@ti :
perl ../../gcc/../contrib/texi2pod.pl ../../gcc/doc/invoke.texi > gcc.pod
../../gcc/doc/invoke.texi:1678: unknown command `ti'
../../gcc/doc/invoke.texi:1678: @include: could not find /home/ymorin/dev/buildroot/O/to/build/host-gcc-initial-7.3.0/build/gcc/../../gcc/../libiberty/at-file.texi
[Peter: use findstring instead of subst/compare]
Reported-by: c32 on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7007dc2bc9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-10873: A vulnerability was discovered in SPICE before version
0.14.1 where the generated code used for demarshalling messages lacked
sufficient bounds checks. A malicious client or server, after
authentication, could send specially crafted messages to its peer which
would result in a crash or, potentially, other impacts.
Drop patches as they are now upstream.
Add host-pkgconf as the configure script uses pkg-config. Drop removed
--disable-automated-tests configure flag.
Add optional opus support, as that is now supported and needs to be
explicitly disabled to not use. Explicitly disable optional gstreamer
support for now as the dependency tree is fairly complicated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f33f7a4f64)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license heading in source files includes the "or any later"
language.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit cfa3447a78)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-14501: An out-of-bounds read flaw exists in
parse_file_info in archive_read_support_format_iso9660.c in libarchive
3.3.2 when extracting a specially crafted iso9660 iso file, related to
archive_read_format_iso9660_read_header.
Drop upstream patches.
Use upstream provided tarball hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 946f136fe1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When two Buildroot builds run in parallel, and they both happen to call
npm at roughly the same time, the two npm instances may conflict when
accessing the npm cache, which is by default ~/.npm
Although npm is supposed to lock access to the cache, it seems it does
sometimes fail to do so properly, bailling out in error, when it would
never ever crash at all when not running in parallel. We suspect that
the sequence leading to such failures are something like:
npm-1 npm-2
lock(retry=few, sleep=short) .
does-stuff() .
. lock(retry=few, sleep=short)
. # can't lock local cache
. download-module()
. # can't download
. exit(1)
unlock()
As per the docs [0], few = 10, short = 10. So if the first npm (npm-1)
takes more than 100s (which can happen behind slow links and/or big
modules that contain native code that is compiled), then the second npm
(npm-2) will bail out (the download would fail if there is no network
access, for example, and only local modules are used).
Point npm to use a per-build cache directory, so they no longer compete
across builds.
That would still need some care when we do top-level parallel builds,
though.
Note also that the conflicts are not totally eliminated: two or more npm
instances may still compete for some other resource that has not yet
been identified.
But, at least, the conflict window has been drastically shortened now,
to the point where it now seldom occurs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4a16182d5f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While Erlang includes a version of zlib, it's intended for Windows and
there's an expectation that non-Windows platforms provide it. It's also
not as regularly updated as the one in Buildroot. This change makes
Erlang always use a Buildroot-provided zlib.
Fixes this compile error:
CC /home/buildroot/autobuild/run/instance-0/output/build/erlang-21.0/erts/emulator/zlib/obj/x86_64-buildroot-linux-musl/opt/adler32.o
In file included from zlib/adler32.c:11:0:
zlib/zutil.h:172:39: error: "_LFS64_LARGEFILE" is not defined [-Werror=undef]
(!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
^~~~~~~~~~~~~~~~
See http://autobuild.buildroot.net/results/fc633f80c7c36a90e641487f5a888fbb767c2a54/.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ec5378038f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Jeff Wittrock in bug #11396, the U-Boot environment
image checksum is invalid for big endian targets, because the test on
the BR2_ENDIAN Config.in option doesn't take into account that it is
double quoted.
The fix was provided by Jeff himself on bugzilla.
Fixes bug #11396.
Reported-by: Jeff Wittrock <jwittrock@faultrecorder.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d6fcf044a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, ustr installs its own source code, which means we end
up with 448 KB of source code in /usr/share in the target filesystem:
$ tree output/target/usr/share/
output/target/usr/share/
└── ustr-1.0.4
├── malloc-check.h
├── ustr-b-code.h
├── ustr-b-dbg-code.c
├── ustr-b-opt-code.c
├── ustr-cmp-code.h
├── ustr-cmp-dbg-code.c
├── ustr-cmp-internal.h
├── ustr-cmp-opt-code.c
├── ustr-cntl-code.h
├── ustr-fmt-code.h
├── ustr-fmt-dbg-code.c
├── ustr-fmt-internal.h
[...]
$ du -sh output/target/usr/share/ustr-1.0.4/
448K output/target/usr/share/ustr-1.0.4/
So let's drop this source code in a post-install target hook.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c27484b2ef)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-10933: authentication bypass vulnerability in the server
code. By presenting the server an SSH2_MSG_USERAUTH_SUCCESS message in
place of the SSH2_MSG_USERAUTH_REQUEST message which the server would
expect to initiate authentication, the attacker could successfully
authenticate without any credentials.
https://www.libssh.org/security/advisories/CVE-2018-10933.txt
Drop an upstream patch.
Cc: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit de24e47d90)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass TARGET_LDFLAGS to EXTRA_LDFLAGS to fix following issue:
/home/buildroot/autobuild/run/instance-3/output/build/host-gcc-final-7.3.0/build/arm-buildroot-linux-musleabihf/libgcc/../../../libgcc/config/arm/lib1funcs.S:1545: undefined reference to `raise'
Also pass TARGET_CFLAGS to EXTRA_CFLAGS and TARGET_CXXFLAGS to
EXTRA_CXXFLAGS and move all these variables to
OPEN_PLC_UTILS_MAKE_OPTS for readability
Fixes:
- http://autobuild.buildroot.org/results/67bc5e7ac8ae1c49c035b022a394d2f746705cf2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d8738d3b97)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a31a66802a ("freetype:
security bump to version 2.5.3"), the freetype package was changed to
call ./autogen.sh to regenerate the autotools stuff, because the
ltmain.sh provided by upstream freetype was not compatible with
Buildroot libtool-patching logic.
Since then, freetype has been bumped several times, and the current
version packaged in Buildroot has an ltmain.sh that is compatible with
our libtool-patching logic.
Therefore, this commit drops the no longer needed autogen stuff.
This autogen stuff was badly breaking per-package host/target
directory, because the autogen happened at the post-patch hook step,
at which point the host-automake/host-autoconf/host-libtool
dependencies have not yet been copied into this package host
directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 88c6329521)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use system liblinear instead of using included liblinear.
liblinear in buildroot is at version 2.20 released on December 2017
whereas liblinear in nmap has not been updated since 7 years (except for
liblinear.vcxproj which has been updated 2 years ago)
Do not use --with-liblinear option as otherwise nmap will forget to add
-llinear to LIBS due to the following line in configure.ac:
if test $have_liblinear != yes; then
AC_CHECK_HEADERS([linear.h],
AC_CHECK_LIB(linear, predict, [have_liblinear=yes; LIBLINEAR_LIBS="-llinear"; break],, [-lm])
)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c0d9ba562c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When used without spdx_lookup the BSD licence cannot be
detected correctly because many Python packages just specify
BSD without the exact version in their metadata. So add a
special message warning the user instead of the licence id.
Bonus: fix typo.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d05e41eb1a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 87d759ced5 (ntp: fix build for no-MMU) added a patch to make MMU
dependent code hidden behind HAVE_WORKING_FORK. It turns out that the
patch covers too much code. When libcap is enabled we pass
--enable-linuxcaps, which in turn enables HAVE_DROPROOT. This adds calls
to code that is covered by HAVE_WORKING_FORK.
Update the no-MMU fix so that HAVE_WORKING_FORK only covers the no-MMU
incompatible routine.
Fixes:
http://autobuild.buildroot.net/results/c5c/c5cf28bb969fec7c07864cdd094dedfa4d5439d2/
Cc: Artem Panfilov <apanfilov@spectracom.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7cf152852d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Many platforms don't provide all FPU features needed by Poco when
configured for soft floating point in their fenv.h header. So
disable fpenvironment for this configuration to avoid build breakage.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c735f39881)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The enum34 dependency is required for python2.7 for both the host and
target builds. This patch adds the host dependency to match what is
already in place for the target.
The host build is used by the setools package seinfo tool offline for
host based policy analysis. The analysis is easiest performed offline
as the policy is checked for path/reachability, which is something
that occurs by taking the policy file and using debug libraries to
perform test cases.
Fixes the following runtime error:
$ ./output/host/bin/sesearch
Traceback (most recent call last):
[...]
File "/home/test/buildroot/output/host/lib/python2.7/site-packages/setools-4.1.1-py2.7-linux-x86_64.egg/setools/policyrep/util.py", line 21, in <module>
from enum import Enum
ImportError: No module named enum
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a5e4eddb84)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-16758: Michael Yonli discovered that tinc 1.0.34 and earlier allow
a man-in-the-middle attack that, even if the MITM cannot decrypt the traffic
sent between the two endpoints, when the MITM can correctly predict when an
ephemeral key exchange message is sent in a TCP connection between two
nodes, allows the MITM to force one node to send UDP packets in plaintext.
The tinc 1.1pre versions are not affected by this.
CVE-2018-16738: Michael Yonli discoverd that tinc versions 1.0.30 to 1.0.34
allow an oracle attack, similar to CVE-2018-16737, but due to the
mitigations put in place for the Sweet32 attack in tinc 1.0.30, it now
requires a timing attack that has only a limited time to complete. Tinc
1.1pre16 and earlier are also affected if there are nodes on the same VPN
that still use the legacy protocol from tinc version 1.0.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d0758184c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
get-developers tries to open DEVELOPERS in the current directory, so it
breaks when calling it from elsewhere than the toplevel Buildroot directory.
Traceback (most recent call last):
File "../utils/get-developers", line 107, in <module>
__main__()
File "../utils/get-developers", line 26, in __main__
devs = getdeveloperlib.parse_developers(os.path.dirname()
File "/home/peko/source/buildroot/utils/getdeveloperlib.py", line 161, in parse_developers
with open(os.path.join(basepath, "DEVELOPERS"), "r") as f:
IOError: [Errno 2] No such file or directory: '/home/peko/source/buildroot/output-foo/DEVELOPERS'
Fix it by instead figuring out where the DEVELOPERS file is relative to the
location of get-developers (E.G. one level up).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout:
- add realpath to support a symlinked get-developers script;
- pass devs_dir argument to check_developers() to support -c in subdir;
- convert basepath to absolute path to support -f option.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 62d5558f76)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes a syntax error introduced in bcf2ed5cc3.
Output before the patch:
$ ./utils/get-developers outgoing/*
File "./utils/get-developers", line 97
print dev
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean
print(dev)?
Output after the patch:
$ ./utils/get-developers outgoing/*
git send-email --to buildroot@buildroot.org
Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8320ad3341)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When called with a list of patches, get-developers prints the entire git
send-email invocation line:
./utils/get-developers 0001-git-security-bump-to-version-2.16.5.patch
git send-email --to buildroot@buildroot.org --cc "Matt Weber <matthew.weber@rockwellcollins.com>"
This may be handy when creating an entire patch series and editing a cover
letter, but it does mean that this has to be explicitly executed and
get-developers cannot be used directly by the --cc-cmd option of git
send-email to automatically CC affected developers.
So add an -e flag to only let get-developers print the email addresses of
the affected developers in the one-email-per-line format expected by git
send-email, similar to how get_maintainer.pl works in the Linux kernel.
With this and a suitable git configuration:
git config sendemail.to buildroot@buildroot.org
git config sendemail.ccCmd "$(pwd)/utils/get-developers -e"
You can simply do:
git send-email master
To automatically mail the buildroot list and CC affected developers on
patches.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bcf2ed5cc3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In addition:
- Update 0001-user-exec-fix-usage-of-mcontext-structure-on-ARM-uCl.patch
with new line numbers and file location.
- Remove upstream 0002-memfd-fix-configure-test.patch
- Add new options found in 2.12.0 in qemu.mk as disabled.
- Remove --with-system-pixman as it's no longer optional.
Tested with test-pkg:
./utils/test-pkg -p qemu -c configs/qemu_min_defconfig
br-arm-full [1/6]: OK
br-arm-cortex-a9-glibc [2/6]: OK
br-arm-cortex-m4-full [3/6]: SKIPPED
br-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: OK
armv5-ctng-linux-gnueabi [6/6]: OK
6 builds, 1 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 06e3957c16)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our package infrastructure uses inheritance of a number of values from
the target package to the host package, which assumes the target
package is defined before the host package. In addition, future
changes are going to make this requirement even more important.
Therefore, let's fix the qemu package so that it declares its target
variant before its host variant, like all other packages in
Buildroot. We handle qemu separately from other packages, because
unlike other packages, it didn't had the "eval" for the host and
target packages at the end of the file, but rather all variables
related to the host variant first, then the call to the package
infrastructure for the host variant, then the variables related to the
target variant, and finally the call to the package infrastructure for
the target variant. We are inverting the order of those two big parts
in this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2ae7b21e0b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to target/mips/TODO in the Qemu sources:
MIPS64
------
- Userland emulation (both n32 and n64) not functional.
And indeed, trying to run a mips64n32 binary under qemu user emulation
results in:
Invalid ELF image for this architecture
So we move the BR2_mips64(el) dependency from
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS, so that only the system
emulation is available on mips64, and not the user-mode emulation.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 17024f5900)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Not all architectures are supported by both the system emulation and
user-mode emulation in Qemu, so a single
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS doesn't work very well.
Therefore, this commit introduces the
BR2_PACKAGE_HOST_QEMU_{SYSTEM,USER}_ARCH_SUPPORTS hidden options. We
keep the BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS option for the (numerous)
architectures supported by both system emulation and user-mode
emulation.
The 'select' logic to make sure that at least either system emulation
or user-mode emulation is selected is reworked, and done carefully to
avoid recursive Kconfig dependencies.
For now BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS and
BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS are the same, but they will
become different in a follow-up commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d7f74dced9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit:
https://git.buildroot.net/buildroot/commit/?id=13722d58f77d0e9fea9eefc50bf083d19f835433
Patch "0003-configure-Invert-AC_CHECK_LIB-EVP_md5-.-without-lz-w.patch"
was intended to fix AC_CHECK_FUNCS() failure on openssl functions. This
was due to missing -lz during static linking.
But the patch is wrong and results in explicitly linking against -lz in
both shared and static build.
This makes no sense, since shared linking has transitive dependency so
it doesn't need to list -lz after -lssl, -lssl is enough.
Differently static linking needs -lz to be listed after -lssl.
So the real cause of previous build failure:
http://autobuild.buildroot.net/results/881/881139fb049738b16609d39ad5a49bd77ff6b4aa/
is that when AC_CHECK_FUNCS(), $LIBS variable is overwritten with
$LIBCRYPTO without taking into accout previous $LIBS content(i.e. where
-lz is present). This results in AC_CHEC_FUNCS() to fail while trying to
statically link without listing -lz.
Then:
- Remove current "0003-configure-Invert-AC_CHECK_LIB-EVP_md5-.-without-lz-w.patch"
- Add patch "0003-configure-fix-AC_CHECK_FUNCS-EVP_sha224-EVP_sha384-..patch"
where add $LIBS content to tail of new $LIBS variable like this:
LIBS="$LIBCRYPTO $LIBS"
NOTE: $LIBS is at the end to ensure static linking to work correctly.
- Add patch 0004-configure-fix-AC_CHECK_FUNCS-TLS_method-TLSv1_method.patch
where add $LIBS content to tail of new $LIBS variable like this:
LIBS="-lssl $LIBCRYPTO $LIBS"
NOTE: $LIBS is at the end to ensure static linking to work correctly.
This way AC_CHECK_FUNCS(), when static linking, try to link with -lz too
appending it at the end of linking library list.
And after every AC_CHECK_FUNCS(), previously saved $LIBS variable gets
back to its original value(i.e. containing -lz if present) resulting in
having or not -lz appended to library list according to static or
shared build.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c5a7c287de)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-18065: _set_key in agent/helpers/table_container.c in
Net-SNMP before 5.8 has a NULL Pointer Exception bug that can be used by an
authenticated attacker to remotely cause the instance to crash via a crafted
UDP packet, resulting in Denial of Service.
For more details, see description and PoC:
https://dumpco.re/blog/net-snmp-5.7.3-remote-dos
Removed patch, applied upstream, autoreconf is not needed anymore.
Added sha256 hashes for tarball and license file.
Switched _SITE to https.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1fe32e8375)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because we are patching Makefile.am, Makefile.am is newer than Makefile.in
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package only needs ncurses when readline support is enabled, as
it's the autoconf macro file for readline (used by autoconf to create
the gnupg configure script) that checks for and pulls in ncurses.
Since readline already depends on ncurses, gnupg need only depend on
readline (when enabled).
The host package always forces readline support off, so the
host-ncurses dependency can be removed entirely.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 51e17496cc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0003-memfd-fix-configure-test.patch applied upstream.
The 4.10.2 version brings a large number of fixes:
https://xenproject.org/downloads/xen-archives/xen-project-410-series/xen-4102.html
Including a number of security fixes:
XSA-260: x86: mishandling of debug exceptions (CVE-2018-8897)
XSA-261: x86 vHPET interrupt injection errors (CVE-2018-10982)
XSA-262: qemu may drive Xen into unbounded loop (CVE-2018-10981)
XSA-263: Speculative Store Bypass (CVE-2018-3639)
XSA-264: preemption checks bypassed in x86 PV MM handling (CVE-2018-12891)
XSA-265: x86: #DB exception safety check can be triggered by a guest
(CVE-2018-12893)
XSA-266: libxl fails to honour readonly flag on HVM emulated SCSI disks
(CVE-2018-12892)
XSA-267: Speculative register leakage from lazy FPU context switching
(CVE-2018-3665)
XSA-268: Use of v2 grant tables may cause crash on ARM (CVE-2018-15469)
XSA-269: x86: Incorrect MSR_DEBUGCTL handling lets guests enable BTS
(CVE-2018-15468)
XSA-272: oxenstored does not apply quota-maxentity (CVE-2018-15470)
XSA-273: L1 Terminal Fault speculative side channel (CVE-2018-3620,
CVE-2018-3646)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 059d655f5c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes
(http://ftp.isc.org/isc/bind9/9.11.4-P2/RELEASE-NOTES-bind-9.11.4-P2.txt):
* There was a long-existing flaw in the documentation for ms-self,
krb5-self, ms-subdomain, and krb5-subdomain rules in update-policy
statements. Though the policies worked as intended, operators who
configured their servers according to the misleading documentation may
have thought zone updates were more restricted than they were; users of
these rule types are advised to review the documentation and correct
their configurations if necessary. New rule types matching the
previously documented behavior will be introduced in a future maintenance
release. [GL !708]
* named could crash during recursive processing of DNAME records when
deny-answer-aliases was in use. This flaw is disclosed in CVE-2018-5740.
[GL #387]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 63eb34fa12)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2018-16543: In Artifex Ghostscript before 9.24, gssetresolution and
gsgetresolution allow attackers to have an unspecified impact
- CVE-2018-17183: Artifex Ghostscript before 9.25 allowed a user-writable
error exception table, which could be used by remote attackers able to
supply crafted PostScript to potentially overwrite or replace error
handlers to inject code.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b054797eca)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The woff2 dependency is used to support Web fonts in WOFF2 format.
This is a Web-facing feature that Web sites expect WebKit to support,
and it is recommended to be unconditionally enabled. While it is
possible to disable the feature at build time, upstream only recommends
doing so if the target system cannot provide a woff2 package.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 51b3fe094a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the woff2 package to Builroot. This is needed by webkitgtk from
version 2.20.0 onwards. WebKitGTK+ used to bundle a copy of the library,
but it stopped doing so now that the upstream is has been making
releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 70afd4afa7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the brotli package to Buildroot. This is needed by woff2, which in
turn is needed by webkitgtk from version 2.20.0 onwards. WebKitGTK+ used
to bundle a copy of the library, but it stopped doing so now that the
upstream has started making releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4f634160b2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mrouted part of igmpproxy is licensed under BSD-3-Clause so add this in
IGMPPROXY_LICENSE and add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c60c928614)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As specified in COPYING, examples are licensed under GPL-3.0+ and .x
files are licensed under BSD-2-Clause.
So update LIBNFS_LICENSE, add COPYING, LICENCE-BSD.txt and
LICENCE-GPL-3.txt to LIBNFS_LICENSE_FILES and add hash for all license
files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1b486d4fa3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cppcms contains embedded third party software so add
THIRD_PARTY_SOFTWARE.TXT to CPPCMS_LICENSE_FILES as well as the
additional licenses to CPPCMS_LICENSE.
Also add hash for COPYING.TXT and THIRD_PARTY_SOFTWARE.TXT
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c17310450b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The underlying problem is that $(foreach V,1 2 3,) does not evaluate to
an empty string. It evaluates to " ", three empty strings separated by
whitespace.
A construct of this format, with a giant list in the foreach, is part of
the printvars command. This means that "@:$(foreach ....)", which is
intended to expand to a null command, in fact expands to "@: "
with a great deal of whitespace. Make chooses to execute this command
with:
execve("/bin/sh", ["/bin/sh", "-c", ": "]
But with far more whitespace. So much that it can exceed shell command
line length limits.
This solution is to move the foreach to another step in the recipe. The
"@:" is retained as the first line so the recipe is not Empty, which
would cause a change in make behavior when make builds the target. The
2nd line, all whitespace, will be skipped by make.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b8d0aadc6d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nine years ago we added autoreconf to fix libtool-related problems
with the matchbox package:
https://git.buildroot.net/buildroot/commit/?id=51ef5b81224c243aa7f937c4690b1a120c81ccbc
After building this defconfig with autoreconf removed from this package
BR2_x86_64=y
BR2_x86_core_avx2=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFONT=y
BR2_PACKAGE_MATCHBOX=y
BR2_PACKAGE_MATCHBOX_SM=y
BR2_PACKAGE_MATCHBOX_COMMON=y
BR2_PACKAGE_MATCHBOX_COMMON_PDA=y
BR2_PACKAGE_MATCHBOX_DESKTOP=y
BR2_PACKAGE_MATCHBOX_KEYBOARD=y
BR2_PACKAGE_MATCHBOX_PANEL=y
BR2_PACKAGE_MATCHBOX_STARTUP_MONITOR=y
it is obvious that the problem which existed nine years ago seems to be
gone, therefore we remove autoreconf from this package because there is
no need for it anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3ae61eac51)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nine years ago we added autoreconf to fix libtool-related problems
with the matchbox package:
https://git.buildroot.net/buildroot/commit/?id=51ef5b81224c243aa7f937c4690b1a120c81ccbc
Autoreconf for this package needs the xutil_util-macros but after
building this defconfig with autoreconf removed from this package
BR2_x86_64=y
BR2_x86_core_avx2=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFONT=y
BR2_PACKAGE_MATCHBOX=y
BR2_PACKAGE_MATCHBOX_SM=y
BR2_PACKAGE_MATCHBOX_COMMON=y
BR2_PACKAGE_MATCHBOX_COMMON_PDA=y
BR2_PACKAGE_MATCHBOX_DESKTOP=y
BR2_PACKAGE_MATCHBOX_KEYBOARD=y
BR2_PACKAGE_MATCHBOX_PANEL=y
BR2_PACKAGE_MATCHBOX_STARTUP_MONITOR=y
it is obvious that the problem which existed nine years ago seems to be
gone. So instead of fixing autoreconf we remove it from this package
because there is no need for it anymore.
Fixes
http://autobuild.buildroot.net/results/30c/30cf5cc139f9f6a9dc070953270f74e18b9310d4/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 534706e260)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current download location fails, and Buildroot falls back to
sources.b.o:
--2018-08-20 23:41:39-- https://red.libssh.org/attachments/download/218/libssh-0.7.5.tar.xz
Resolving red.libssh.org (red.libssh.org)... 78.46.80.163
Connecting to red.libssh.org (red.libssh.org)|78.46.80.163|:443... connected.
The certificate's owner does not match hostname ‘red.libssh.org’
--2018-08-20 23:41:39-- http://sources.buildroot.net/libssh/libssh-0.7.5.tar.xz
Resolving sources.buildroot.net (sources.buildroot.net)... 104.25.211.19, 104.25.210.19, 2400:cb00:2048:1::6819:d313, ...
Connecting to sources.buildroot.net (sources.buildroot.net)|104.25.211.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 351632 (343K) [application/x-xz]
This commit fixes the download location:
--2018-08-20 23:43:04-- https://www.libssh.org/files/0.7/libssh-0.7.5.tar.xz
Resolving www.libssh.org (www.libssh.org)... 87.98.168.187, 2001:41d0:2:f80c::4
Connecting to www.libssh.org (www.libssh.org)|87.98.168.187|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 351632 (343K) [application/x-tar]
This patch is extracted from a contribution from Bernd Kuhls who was
also bumping the package at the same time
(http://patchwork.ozlabs.org/patch/959192/).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ac26da5275)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the function add_one_group is called on an existing group,
make sure the members of this group are not removed in the process of
deleting then re-adding the group.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add curly braces when referencing ${members}, as suggested by
Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 497f7134fc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's preferable to use "shutdown -hP now" to ensure that the runlevel is
known, preventing this message on the system console and log:
WARNING: could not determine runlevel - doing soft poweroff
(it's better to use shutdown instead of poweroff from the command line)
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ab842ce21d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e047dee241 adds an upstream patch
to fix a build issue with soxr. The patch also adds detecting soxr
using pkg-config. Upstream detected an config issue [1], where the
resulting binary lacks soxr support, although libsoxr was correctly
detected.
This patch adds a define for `HAVE_LIBSOXR` when using pkg-config.
Backported from: cd6a99a7cfde1c5e1c1cc74ee6a77041bb4012d9
[1] https://github.com/mikebrady/shairport-sync/issues/740
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ac4bca24ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fio does not have any special conditions since version 2.2.6 indeed
MORAL-LICENSE has been updated to replace "promising" by "encouraged"
and "must" by "should":
67f4822ce3
So fix LICENSE, add MORAL-LICENSE to LICENSE_FILES and add hash for both
licenses
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c4f923176a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Daniel Alvarez (1):
getifaddrs: Don't return ifa entries with NULL names [BZ #21812]
Florian Weimer (8):
libio: Avoid _allocate_buffer, _free_buffer function pointers [BZ #23236]
Use _STRUCT_TIMESPEC as guard in <bits/types/struct_timespec.h> [BZ #23349]
libio: Disable vtable validation in case of interposition [BZ #23313]
NEWS: Reorder out-of-order bugs
Synchronize support/ infrastructure with master
libio: Add tst-vtables, tst-vtables-interposed
stdio-common/tst-printf.c: Remove part under a non-free license [BZ #23363]
conform/conformtest.pl: Escape literal braces in regular expressions
Gabriel F. T. Gomes (1):
Fix parameter type in C++ version of iseqsig (bug 23171)
H.J. Lu (2):
x86: Correct index_cpu_LZCNT [BZ #23456]
x86: Populate COMMON_CPUID_INDEX_80000001 for Intel CPUs [BZ #23459]
Martin Kuchta (1):
pthread_cond_broadcast: Fix waiters-after-spinning case [BZ #23538]
Stefan Liebler (1):
Fix segfault in maybe_script_execute.
Steve Ellcey (1):
Check length of ifname before copying it into to ifreq structure.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Little CMS (aka Little Color Management System) 2.9 has an integer overflow
in the AllocateDataSet function in cmscgats.c, leading to a heap-based
buffer overflow in the SetData function via a crafted file in the second
argument to cmsIT8LoadFromFile.
For more details, see:
https://github.com/mm2/Little-CMS/issues/171https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-16435
The upstream fix unfortunately includes a number of unrelated changes, but
thse files are not used when building for Linux.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9f81f578eb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build fails with:
In file included from dyncall_callback.c:35:0:
dyncall_callback_ppc64.c: In function 'dcbNewCallback':
dyncall_callback_ppc64.c:42:13: warning: implicit declaration of function 'dcAllocWX' [-Wimplicit-function-declaration]
int err = dcAllocWX(sizeof(DCCallback), (void**) &pcb);
^~~~~~~~~
dyncall_callback_ppc64.c: In function 'dcbFreeCallback':
dyncall_callback_ppc64.c:53:3: warning: implicit declaration of function 'dcFreeWX' [-Wimplicit-function-declaration]
dcFreeWX(pcb, sizeof(DCCallback));
^~~~~~~~
dyncall_callback_ppc64.S: Assembler messages:
dyncall_callback_ppc64.S:180: Error: operand out of range (3 is not between 0 and 1)
So select BR2_PACKAGE_LIBFFI for BR2_powerpc64 and BR2_powerpc64le as it
is already done for MIPS
Fixes:
- http://autobuild.buildroot.org/results/97b53a74d9847c07f26178daeb1daff3b6c24813
- http://autobuild.buildroot.org/results/c35ac4bbc5fb04aabf5a719eddeedf55f7f1f4eb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b1b35eb9c5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
/usr/lfs/v0/rc-buildroot-test/scripts/instance-2/output/host/bin/arm-none-linux-gnueabi-gcc -c -I. -I. -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\"\" \
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_GNU_SOURCE list_display.c
In file included from screen.h:150:0,
from list_display.c:36:
display.h:154:19: error: 'T_N' undeclared here (not in a function)
union tcu d_tcs[T_N]; /* terminal capabilities */
Macro T_N is defined in header file term.h but it may not be created
then fails. Backport patch to make sure term.h is created before compile
other source codes.
Fixes:
- http://autobuild.buildroot.org/results/a62bea1fd32246526d59f029df3dca60f1cd710f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d496329a19)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script enables the DirectFB video driver, but forgets to
enable the renderer driver, causing SDL_CreateRenderer() to fail. Add an upstream patch to fix this.
[Peter: reword/extend commit text,
add git formatted patch from https://github.com/spurious/SDL-mirror]
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d114494456)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The qtwebengine package used by Qt LTS has a different set of license
files for chromium, so this commit introduces a separate
chromium-lts.inc with the right contents.
This fixes legal-info of qt5webengine with Qt LTS.
Signed-off-by: Laurent Hartanerot <laurent.hartanerot@atos.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b105dc2b0b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In minicom package hash file lacks sha256 entry for COPYING file even if
it is added to MINICOM_LICENSE_FILES.
Add COPYING sha256 entry to minicom.hash file.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6edfa41a0a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add kconfig help text that explains how to manually specify an
official Linux version to use for the kernel headers.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3beba26d76)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similarly to c48f8a6462 (package/m4: fix build on host with glibc-2.28),
backport the two fixes fromn gnulib upstream, that allows building
host-bison on systems using glibc 2.28.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reported-by: c32 on IRC
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 373ac58b82)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Depending on the configuration, the cpp output may contain the string 'yes'
in a comment if built under a path containing 'yes', confusing the _AIX
test:
${CROSS}-cpp conftest.h
\# 1 "conftest.h"
\# 1 "<built-in>"
\# 1 "<command-line>"
\# 31 "<command-line>"
\# 1 "/home/peko/source/buildroot/output-yes/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/stdc-predef.h"
\# 32 "<command-line>" 2
\# 1 "conftest.txt"
If misdetected, the configure script adds -lc128 to LIBS, causing the
AC_CHECKS_FUNCS check for stat64 to fail, which in turn causes compilation
errors about redefinition of symbols:
In file included from ./src/include/pv-internal.h:9:0,
from src/pv/file.c:5:
./src/include/config.h:76:18: error: redefinition of 'struct stat'
# define stat64 stat
^
Fix it by only matching on 'yes' on a line by itself.
As pv doesn't cleanly autoreconf (it doesn't use automake and configure.in
is located in subdir), instead directly patch configure.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 994a47649b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-08-29 23:22:37 +02:00
199 changed files with 2552 additions and 2176 deletions
+VERSION = $(shell grep LIVEMEDIA_LIBRARY_VERSION_STRING liveMedia/include/liveMedia_version.hh | sed 's/.*"\([^"]*\)".*/\1/')
##### Change the following for your environment:
diff --git a/Makefile.tail b/Makefile.tail
index fc594ea..a20a527 100644
--- a/Makefile.tail
+++ b/Makefile.tail
@@ -22,7 +22,12 @@ all:
@echo
@echo "For more information about this source code (including your obligations under the LGPL), please see our FAQ at http://live555.com/liveMedia/faq.html"
-install:
+install_shared_libraries:
+ install -d $(DESTDIR)$(LIBDIR)/pkgconfig
+ sed "s#@PREFIX@#$(PREFIX)#;s#@LIBDIR@#$(LIBDIR)#;s#@VERSION@#$(VERSION)#" live555.pc.in > $(DESTDIR)$(LIBDIR)/pkgconfig/live555.pc
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
