mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-09-08 23:51:08 -09:00
f1e1a078a7
CLooG is a free software and library to generate code for scanning Z-polyhedra. cloog is needed for the optional graphite optimisations that are supported by gcc since version 4.5. Therefore this package is required for the toolchain to support graphite. Graphite optimisations primarily involve loop blocking flattening and interchage so are probably of mimimal use in an embedded system where small sizes are favoured. cloog depends on isl. [Thomas: - Add patch to add missing CMake related files to the release tarball, preventing the build from succeeding. - bump to 0.18.2 - disable libtool patch, which doesn't apply] Signed-off-by: Steve Thomas <scjthm@live.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To build and use the buildroot stuff, do the following:
1) run 'make menuconfig'
2) select the packages you wish to compile
3) run 'make'
4) wait while it compiles
5) Use your shiny new root filesystem. Depending on which sort of
root filesystem you selected, you may want to loop mount it,
chroot into it, nfs mount it on your target device, burn it
to flash, or whatever is appropriate for your target system.
You do not need to be root to build or run buildroot. Have fun!
Offline build:
==============
In order to do an offline-build (not connected to the net), fetch all
selected source by issuing a
$ make source
before you disconnect.
If your build-host is never connected, then you have to copy buildroot
and your toplevel .config to a machine that has an internet-connection
and issue "make source" there, then copy the content of your dl/ dir to
the build-host.
Building out-of-tree:
=====================
Buildroot supports building out of tree with a syntax similar
to the Linux kernel. To use it, add O=<directory> to the
make command line, E.G.:
$ make O=/tmp/build
And all the output files (including .config) will be located under /tmp/build.
More finegrained configuration:
===============================
You can specify a config-file for uClibc:
$ make UCLIBC_CONFIG_FILE=/my/uClibc.config
And you can specify a config-file for busybox:
$ make BUSYBOX_CONFIG_FILE=/my/busybox.config
To use a non-standard host-compiler (if you do not have 'gcc'),
make sure that the compiler is in your PATH and that the library paths are
setup properly, if your compiler is built dynamically:
$ make HOSTCC=gcc-4.3.orig HOSTCXX=gcc-4.3-mine
Depending on your configuration, there are some targets you can use to
use menuconfig of certain packages. This includes:
$ make HOSTCC=gcc-4.3 linux-menuconfig
$ make HOSTCC=gcc-4.3 uclibc-menuconfig
$ make HOSTCC=gcc-4.3 busybox-menuconfig
Please feed suggestions, bug reports, insults, and bribes back to the
buildroot mailing list: buildroot@buildroot.org