check-package reports six warnings on S60lldpd: indentation with
spaces, no DAEMON variable, and shellcheck complaints.
The script also masks failures, the exit status of
"[ $? = 0 ] && echo OK || echo FAIL" is the one of echo, so start and
stop always return success. Stopping does not wait for the daemon to
exit either, so a restart can race the instance on its way out.
Rewrite it after package/busybox/S01syslogd, as the manual asks. lldpd
daemonizes and writes the PID file itself, but does not remove it on
exit, so pass the PID file to both start-stop-daemon and the daemon and
drop the stale file once the process is gone. Also pick up arguments
from /etc/default/lldpd and add the customary reload alias.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[Julien: remove .checkpackageignore entry to fix check-package error]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 2fd1f6b629)
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
In commit 203725a46b ("package/clamav:
bump version to 1.0.1"), select BR2_PACKAGE_JSON_C was added to
BR2_PACKAGE_CLAMAV without propagating the BR2_TOOLCHAIN_HAS_SYNC_4
dependency from BR2_PACKAGE_JSON_C.
Since at the same time a dependency on
BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS was added to clamav and
Rust is not supported on the few architectures that don't have 4-byte
sync intrinsics, this has basically no effect, but ensure a correct
propagation of dependencies.
Fixes: 203725a46b ("package/clamav: bump version to 1.0.1")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 39b840beef)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_FALCOSECURITY_LIBS selects BR2_PACKAGE_HOST_GRPC and
BR2_PACKAGE_HOST_PROTOBUF, neither of which exists. These selects are
anyway not needed, so drop them.
Fixes: a15e35c4eb ("falcosecurity-libs: add new package")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 7f5bb493e2)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_WEBKITGTK_MULTIMEDIA selects BR2_PACKAGE_GST1_LIBAV, which
depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS, but doesn't propagate
this dependency. In practice, there is no issue, as webkitgtk is only
available on a subset of CPU architectures, while
BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS makes ffmpeg available on pretty much
all CPU architectures, except Cortex-M, m68k coldfire, and some
specific cases of OpenRISC, which are not supported by webkitgtk.
But for the sake of having correct dependency propagation, let's fix
this.
The other packages selected by BR2_PACKAGE_WEBKITGTK_MULTIMEDIA have
dependencies that are already handled at the top-level
BR2_PACKAGE_WEBKITGTK option.
Fixes: e6e549b9e4 ("ffmpeg: add BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit da90655637)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In commit
0e2c958e05 ("package/libseccomp: bump to
version 2.5.3"), the kernel headers dependency of seccomp was bumped
from 3.12 to 3.17, but BR2_PACKAGE_WEBKITGTK_SANDBOX, which is a
reverse dependency of BR2_PACKAGE_LIBSECCOMP was forgotten.
This commit fixes this inconsistency.
Fixes: 0e2c958e05 ("package/libseccomp: bump to version 2.5.3")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ef92929504)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_LIBSSH_OPENSSL unconditionnally selects
BR2_PACKAGE_LIBOPENSSL_ENGINES even though libressl is also supported
as an OpenSSL provider (and BR2_PACKAGE_LIBOPENSSL_ENGINES doesn't
make sense for libressl).
This causes the following Kconfig warning:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_LIBOPENSSL_ENGINES
Depends on [n]: <choice> && BR2_PACKAGE_LIBOPENSSL [=n]
Selected by [y]:
- BR2_PACKAGE_LIBSSH_OPENSSL [=y] && <choice> && BR2_PACKAGE_OPENSSL [=y]
We checked that libssh, with OpenSSL support and libressl selected as
an OpenSSL provider works fine, using the following defconfig:
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y
BR2_PACKAGE_LIBSSH=y
BR2_PACKAGE_LIBSSH_SERVER=y
BR2_PACKAGE_LIBRESSL=y
Fixes: 62103be918 ("package/libssh: select BR2_PACKAGE_LIBOPENSSL_ENGINES")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit f7fe354ada)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_QT5CINEX selects BR2_PACKAGE_QT5BASE_PNG,
BR2_PACKAGE_QT5BASE_WIDGETS and BR2_PACKAGE_QT5BASE_EGLFS, which are
all sub-options of BR2_PACKAGE_QT5BASE_GUI, but we don't explicitly
selects BR2_PACKAGE_QT5BASE_GUI.
It turns out that things work because the package selects
BR2_PACKAGE_QT5GRAPHICALEFFECTS, which selects
BR2_PACKAGE_QT5DECLARATIVE_QUICK, which selects
BR2_PACKAGE_QT5BASE_GUI, but that is rather non-obvious, and it makes
more sense for BR2_PACKAGE_QT5CINEX to directly select
BR2_PACKAGE_QT5BASE_GUI if it also selects sub-options of it.
No functional change.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit f077ba9e67)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- BR2_PACKAGE_IVI_HOMESCREEN_AUDIO_PLAYERS selects gstreamer1, which
has a depends on BR2_USE_MMU, but does not propagate it
- BR2_PACKAGE_IVI_HOMESCREEN_FLUTTER_SECURE_STORAGE_PLUGIN selects
libsecret, which has a depends on BR2_USE_MMU, but does not propagate
it
In practice there is no problem since ivi-homescreen depends on glibc,
and glibc doesn't support any noMMU architecture. But just by walking
the chain of option dependencies, this is not something that is
theoretically guaranteed (making automated verification of
dependencies difficult).
The other "depends on" from gstreamer1 and libsecret, BR2_USE_WCHAR
and BR2_TOOLCHAIN_HAS_THREADS are on the other hand already handled by
the top-level BR2_PACKAGE_IVI_HOMESCREEN option, so there is no
ambiguity.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 90aeea08bb)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_PULSEVIEW selects BR2_PACKAGE_QT5BASE_PNG and
BR2_PACKAGE_QT5BASE_WIDGETS, which both depend on
BR2_PACKAGE_QT5BASE_GUI. It ends working because we also select
BR2_PACKAGE_QT5SVG, which selects BR2_PACKAGE_QT5BASE_GUI, so there is
no bug, but it's bit inconsistent to select sub-options that have a
"depends on" without selecting the option they depend on.
This not a bug fix, it has no functional implication.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit aff091c39d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
pocketpy enables thread support by default (PK_ENABLE_THREADS=ON) and
then requires Threads from cmake, which fails on toolchains without
thread support:
CMake Error at /usr/share/cmake-3.28/Modules/FindPackageHandleStandardArgs.cmake:230 (message):
Could NOT find Threads (missing: Threads_FOUND)
Thread support is optional, so enable it only when the toolchain
provides threads.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 376daf3dd0)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The definition of BR2_PACKAGE_KODI_ARCH_SUPPORTS is incorrect, it
goes like this:
bool
default y if BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS
default y if BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS
so it means it would be "y" if either
BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS *OR*
BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS is true. While clearly what
we need is for both to be true: ffmpeg should be available for the
target architecture, and openjdk should be available for the host
architecture.
One option was to change to:
bool
default y if BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS && BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS
Or:
bool
default y if BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS
depends on BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS
But we preferred:
bool
default y
depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS
depends on BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS
Fixes: b6a2f49429 ("package/kodi: depend on host-openjdk-bin instead of selecting BR2_NEEDS_HOST_JAVA")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 00e83bc24d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Even though kodi itself has architecture dependencies (expressed
through BR2_PACKAGE_KODI_ARCH_SUPPORTS, the option
BR2_PACKAGE_KODI_MYSQL selects BR2_PACKAGE_MARIADB, which has its own
architecture dependencies as well. Make sure to propagate those to
BR2_PACKAGE_KODI_MYSQL, which doesn't require adding a Config.in
comment as these are purely architecture dependencies.
We haven't replicate all dependencies of BR2_PACKAGE_MARIADB because
all the others are covered by the top-level BR2_PACKAGE_KODI, and
propagating them would require adding a Config.in comment for
BR2_PACKAGE_KODI_MYSQL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 16e3d628bd)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since hidapi was introduced in commit
6267f34afd, it forgot to propagate some
dependencies of libgudev (which existed back then). Initially libgudev
was only needed when BR2_INIT_SYSTEMD=y, but still the dependencies
were not propagated for the systemd case.
Anyway, since e739dd5a11, libgudev is a
mandatory dependency of hidapi, independently from the selected init
system.
We make sure to propagate all dependencies of libgudev to hidapi, and
propagate them to the reverse dependencies of hidapi.
Fixes: 6267f34afd ("hidapi: new package")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 74def2cdd4)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_ARGP_STANDALONE is defined as follows:
config BR2_PACKAGE_ARGP_STANDALONE
depends on !BR2_TOOLCHAIN_USES_GLIBC
Some packages did:
select BR2_PACKAGE_ARGP_STANDALONE if !BR2_TOOLCHAIN_USES_GLIBC
while a number of others did:
select BR2_PACKAGE_ARGP_STANDALONE if BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_MUSL
This commit harmonizes the situation, by settling on the first
solution ("if !BR2_TOOLCHAIN_USES_GLIBC") as it matches how
BR2_PACKAGE_ARGP_STANDALONE is defined in the first place.
No functional change.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 1799bf3680)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_INTEL_VPL_GPU_RT selects BR2_PACKAGE_INTEL_MEDIADRIVER but
did not propagate "depends on BR2_TOOLCHAIN_GCC_AT_LEAST_8". This
commit fixes this issue, which was introduced in commit
ac65841def, when onevpl-intel-gpu was
introduced (it was later renamed to intel-vpl-gpu-rt).
Fixes: ac65841def ("package/onevpl-intel-gpu: new package")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 876023bc5a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_INTEL_MEDIASDK selects BR2_PACKAGE_INTEL_MEDIADRIVER but
forgets to propagate the "depends on BR2_TOOLCHAIN_GCC_AT_LEAST_8".
This issue was introduced in commit
51b60c8acf, when "depends on
BR2_TOOLCHAIN_GCC_AT_LEAST_8" was added to mesa3d, propagated to
intel-mediadriver, but not intel-mediasdk.
Fixes: 51b60c8acf ("package/mesa3d: needs gcc >= 8")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit fa38fea91c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_PYTHON_MEMRAY selects BR2_PACKAGE_LIBUNWIND but forgot to
propagate "depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9".
Fixes: c2df8bab97 ("package/python-memray: new package")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit e36370624d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_PYTHON_GRPCIO_REFLECTION selects
BR2_PACKAGE_PYTHON_PROTOBUF, but forgot to replicate "depends on
BR2_PACKAGE_HOST_PROTOBUF_ARCH_SUPPORTS".
Fixes: 3217fedcb8 ("package/python-grpcio-reflection: new package")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 74dab03495)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_PYTHON_GOOGLEAPIS_COMMON_PROTOS selects
BR2_PACKAGE_PYTHON_PROTOBUF but did not propagate
BR2_PACKAGE_HOST_PROTOBUF_ARCH_SUPPORTS.
Fixes: d37766a886 ("package/python-googleapis-common-protos: new package")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 548904619c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit 66ddec89e8 ("package/udisks: bump
to version 2.92") mistakenly removed the BR2_USE_MMU dependency of
udisks when dropping "select BR2_PACKAGE_LVM2". Indeed, BR2_USE_MMU is
a dependency of many other packages selected by udisks.
Interestingly, the Config.in comments in the same file still had the
"depends on BR2_USE_MMU" dependencies.
Fixes: 66ddec89e8 ("package/udisks: bump to version 2.92")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 4b8259bad9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since bcc was introduced in commit
146498d13c, it lacked a dependency
propagation from clang for BR2_TOOLCHAIN_HAS_GCC_BUG_64735, this
commit fixes this mistake.
Fixes: 146498d13c ("package/bcc: new package")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit c305370f36)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS redefines the conditions to
determine if a host go compiler is available for the current host
architecture. Instead, make it explicit that those conditions are the
same by re-using BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS.
No functional change.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 71d3ffd372)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In commit
fef9cad1fe ("package/libxmlsec1: bump
version to 1.3.12"), libxmlsec1 was bumped, and alongside some
additional "depends on" were added.
However, these new "depends on" were not propagated to reverse
dependencies of libxmlsec1, i.e. openscap, causing Kconfig warnings:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_LIBXMLSEC1
Depends on [n]: BR2_TOOLCHAIN_GCC_AT_LEAST_7 [=n] && BR2_TOOLCHAIN_HAS_ATOMIC [=n]
Selected by [y]:
- BR2_PACKAGE_OPENSCAP [=y] && BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS [=y] && !BR2_STATIC_LIBS [=n] && BR2_TOOLCHAIN_HAS_THREADS_NPTL [=y]
and potentially some build issues, even though we didn't check in the
autobuilders for potential failures.
This commit fixes that by properly propagating the new dependencies.
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 36b2b3f561)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The demo programs, which have always been built and are still enabled by
default, gained a zlib dependency in imlib2 1.12.3: upstream commit
f8a451043871 ("imlib2_load: Add crc32 printout") started using zlib's
crc32() in imlib2_load, and 31006b425e11 ("imlib2_view: Optionally show
crc32 of image data") did the same for imlib2_view. Both hardcoded -lz.
Upstream commit b9555030dace ("autofoo: don't hardcode zlib flags"),
first released in 1.12.4, replaced -lz with $(ZLIB_LIBS) and added an
unconditional PKG_CHECK_MODULES(ZLIB, zlib) to the demo programs branch
of configure, turning the previously silent link-time requirement into a
configure failure:
checking for zlib... no
configure: error: Package requirements (zlib) were not met:
Package 'zlib' not found
As Buildroot went straight from 1.7.3 to 1.12.5 the intermediate state
was never packaged, but the dependency has in fact been missing since the
crc32 support landed.
Fixes: https://autobuild.buildroot.org/results/4e05404c353ef985d74757d0b1ec3eda2cdff523/
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 051e5ab13b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/tukaani-project/xz/releases/tag/v5.8.4
- lzma_alone_decoder(), lzma_lzip_decoder(),
lzma_auto_decoder(), and lzma_microlzma_decoder(): Fix an
invalid memory access after memory allocation has failed and
the application reinitializes the existing decoder to decode
a different file. This bug could at least result in a crash.
This is tracked as GHSA-5qpq-xqfv-j9pg. CVE number is pending.
(Also in v5.2, v5.4, and v5.6.)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6f125a6530)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes a sandbox escape through symlink traversal tracked in
CVE-2026-87766, which affects all previous versions.
Using the bwrap binary with the setuid bit set is no longer supported
and user namespaces are now always required, so a kernel config fixup
is applied.
A new build option allows indicating the minimum kernel version that
will be used, which removes code used for backwards compatibility with
kernels older than 5.6.0 when a newer version is specified. Passing
$(LINUX_VERSION_PROBED) seems reasonable here.
This version also changed the license from LGPL-2.0+ to LGPL-2.1+,
hence the updated hash.
Release notes:
https://github.com/containers/bubblewrap/releases/tag/v0.12.0
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Julien: fix _LINUX_CONFIG_FIXUPS by adding the missing "_LINUX"]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 4cb6193d2e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
To indicate that a patch fixes a vulnerability in Buildroot, the convention is:
1. In the patch file, add a tag 'CVE: <cve id>'
2. In <pkg>.mk, and an entry to <PKG>_IGNORE_CVES, and add a comment above
that new entry to reference the patch file(s)
However, as packages get bumped and their patches are added, removed or
rebased; it happens that IGNORE_CVES get outdated. One important issue is
marking a CVE as ignored, while the corresponding patch is not in Buildroot.
To detect such cases, add a new checker to checkpackagelib that finds
occurences of:
# 000x-some-patch.patch
PKG_IGNORE_CVES += CVE-XXXX-YYYY
For each one of them, ensure that the mentioned patch files actually exist
and contain the `CVE: ...` tag.
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b00ac4e346)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Prior to improving check-package to verify that the comment preceding
a <pkg>_IGNORE_CVES entry mentions an existing patch, and that the
patch itself contains a CVE: tag, we fix all problematic cases that
currently exist in Buildroot:
- In the case of binutils: the CVE was only applicable to binutils
2.43/2.44, and the oldest version now supported is 2.45, so the
patch doesn't exist anymore in Buildroot
- For x11vnc, fix a typo in the patch name
- For gpsd the patches were dropped in [1] as they are included in the
version bump
- Similarly for micropython, the patches were dropped in [2] along with
the version bump
- For util-linux, strip the prefix "package/util-linux/", so that the patch
is relative to the .mk file and can be found by the new check
- Add missing 'CVE:' tag to net-tools patch 0001
[1] 37ef4f862f package/gpsd: bump version to 3.27.2
[2] 28eeca9a98 package/micropython: bump to version 1.28.0
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 636f69ab45)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/PCRE2Project/pcre2/releases/tag/pcre2-10.48
Fixes the following security issues:
(Security fix for specific API usage, GHSA-2p8c-ff85-vh9x)
If pcre2_jit_compile() is called with options for some match modes, and
then pcre2_match() is used to perform a match for a different match
mode, an out-of-bounds read can occur if the match is attempted against
invalid UTF input.
(Security fix for pattern conversion, GHSA-q8g2-wprr-34m9)
If pcre2_convert() is called on untrusted input on platforms with
32-bit size_t, an out-of-bounds heap write can occur.
(Security fix, GHSA-3r4p-g7gg-ppmf) Fixed an out-of-bounds write in DFA
matching when using a heap limit; also fixed possible integer overflows
which could cause under-allocation of the workspace.
(Security fix, GHSA-fmgr-6ggq-9859) Added bounds checks for several
integer overflows while compiling patterns on 32-bit CPUs, which could
cause under-allocation followed by out-of-bounds writes.
(Security fix, GHSA-9qww-pwc4-77qq) Applied lower buffer bound to
prevent two out-of-bounds reads while scanning backwards through
invalid UTF data with PCRE2_MATCH_INVALID_UTF.
(Security fix for specific API usage, #937) Fixed a leak and later
invalid free when calling the fast-path pcre2_jit_match() function with
a match data object previously used with pcre2_match() and
PCRE2_COPY_MATCHED_SUBJECT.
(Low-severity security fix, GHSA-q7rw-r7qq-2hx6) Fixed exposure of two
uninitialised bytes from malloc() via pcre2_serialize_encode().
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 664db5d62c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/kernelsauce/turbo/releases/tag/v2.1.5https://github.com/kernelsauce/turbo/releases/tag/v2.1.4
Security fixes:
HTTP header injection: header values were only checked for a literal
\r\n, so a lone \r or \n could still split a header. Now rejected on
either character.
Transfer-Encoding requests are now rejected with 501 instead of silently
mishandled, closing a request smuggling avenue.
A real default request body size cap (128 MB) with a 413 response,
previously unbounded.
Secure cookie signature now binds the cookie name, so a value signed for
one cookie can no longer be replayed under a different name.
Verification failures return the default value instead of raising.
Constant-time comparison for the secure cookie HMAC, previously a
timing-leaky ==.
util.secure_random_bytes reads real OS entropy (/dev/urandom,
BCryptGenRandom on Windows) for WebSocket masks and util.rand_str,
previously math.random.
WebSocket: unmasked client frames are rejected per RFC 6455, and
fragmented message reassembly is capped to max_buffer_size to close a
memory exhaustion path.
StaticFileHandler decodes the request path before the traversal check,
closing a bypass.
Fixed a 32-byte-per-malformed-request memory leak in the C header parser
wrapper (found via libFuzzer).
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 15a422cee1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Upstream started using std::string_view
https://github.com/search?q=repo%3APurpleI2P%2Fi2pd+string_view&type=commits&s=committer-date&o=asc
with commit
a3e0b3710c
first released in version 2.54.0 which was added to buildroot with
commit dea4f02bbb.
Building the package with the gcc6-based defconfig
bootlin-aarch64-glibc-old is broken:
/builds/bkuhls/buildroot/br-test-pkg/bootlin-aarch64-glibc-old/build/i2pd-2.61.0/libi2pd/Base.h:14:23:
fatal error: string_view: No such file or directory
BR2_TOOLCHAIN_HAS_GCC_BUG_64735 can be removed as well now as it depends
on gcc < 7.
A backport to LTS branches should be considered.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a6bb4d52c0)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/the-tcpdump-group/libpcap/blob/libpcap-1.10.7/CHANGES
Fixes the following CVEs:
CVE-2026-0799: Access M[] safely in the BPF interpreter.
CVE-2026-31912: Mind the program bounds in pcap_offline_filter().
CVE-2026-31911: Fail opcodes safely in the BPF interpreter.
CVE-2026-6244: Avoid division by zero via pcap_offline_filter().
CVE-2026-6554: Limit "ja L" looping in pcap_offline_filter().
CVE-2026-18313: Fix a memory leak in rpcapd.
CVE-2026-18238: Fix RPCAP_MSG_PACKET validation.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 446c0f85b8)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
igh-ethercat is failing while attempting to apply patches,
with error:
Applying 0002-Linux-6.19.0-support.patch using patch:
patching file devices/generic.c
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file devices/generic.c.rej
The package patch 0002 was added in [1] in branch "master" while it
was in release client cycle. It was cherry-picked in [2] in branch
"next" to apply the bump [3] (which removes the package patches 0001
and 0002). When the branch "next" was merged in "master" in commit [4],
the patch 0002 was kept.
This commit removes this stale patch.
[1] e4cf512c39
[2] 8a5fc970b4
[3] 0a91e760f4
[4] 5f26877955
Fixes:
- https://autobuild.buildroot.org/results/4f509f1f788c1b8dc5a840ffa2e435c5ed7b6eea/
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit d071817969)
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
https://github.com/strukturag/libde265/releases/tag/v1.1.2
Security fixes:
(CVE numbers will be added when assigned.)
CVE-2026-XXXXX (GHSA-xp3h-6f5r-8cxp) Heap use-after-free and double free
in multi-threaded (WPP) decoding. A crafted stream whose slice segments
repeat or rewind their slice_segment_address within a picture re-ran
CTB rows that were already marked finished, so the CABAC context handoff
between rows was no longer ordered and the shared context table was
released twice. Slice segments that do not follow the previous one in
tile-scan order are now rejected with the new warning
DE265_WARNING_SLICE_SEGMENT_ADDRESS_NOT_INCREASING, and the WPP row
progress is reset for each slice segment. (medium)
CVE-2026-XXXXX (GHSA-mm7m-v26f-wf8x) Heap use-after-free after
de265_reset(): the pointer to the previous slice header was left
dangling when the DPB was cleared, and a dependent slice pushed after
the reset copied from freed memory. (medium)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit e55cb31085)
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
https://github.com/strukturag/libheif/releases/tag/v1.23.3
Fixes the following CVEs:
(CVE numbers will be added when assigned.)
CVE-2026-XXXXX (GHSA-x8r2-mggj-j6wr) Heap buffer overflow (write) in the
uncompressed (unci) mixed-interleave decoder when the two chroma
components declare different bit depths. Both the written bytes and the
overflow length are controlled by the file. (critical)
CVE-2026-XXXXX (GHSA-8fmq-r4pf-7m57) Permanent decoder deadlock through
a reference cycle between an image and its alpha auxiliary image. The
alpha edge was not covered by the cycle guard and re-entered a held
mutex. (high)
CVE-2026-XXXXX (GHSA-w7mc-p8jc-p853) Heap out-of-bounds read in the
YCbCr 4:2:0 to 16-bit interleaved RGB conversion when the chroma
planes have a lower bit depth than luma. Heap memory could end up in
the decoded image. YCbCr conversions with mismatched luma and chroma
bit depths are now rejected. (high)
CVE-2026-XXXXX (GHSA-4jqm-2x34-6f6r) Heap buffer overflow in the SVT-AV1
encoder plugin when encoding a high-bit-depth alpha channel, and a
double free on its send-picture error path. (high)
CVE-2026-84451 (GHSA-hh47-fhqr-cj2r) Incomplete fix for
GHSA-73p7-m7gg-w2jv: the tile range check of the unci decoder (without
icef) could still overflow, allowing an out-of-bounds read. (medium)
CVE-2026-XXXXX (GHSA-4h82-g446-83fm) Heap out-of-bounds read when
converting odd-height 4:2:0 frames of an uncompressed (uncv) image
sequence to RGB. (medium)
CVE-2026-XXXXX (GHSA-9rj8-5mp5-26c9) Out-of-bounds read in the RGB to
YCbCr identity-matrix color conversion when the R, G, and B planes
have different bit depths. (medium)
CVE-2026-84450 (GHSA-gh5q-69gg-c964) A clap property combined with an
oversized ispe reached an assert() in the Fraction arithmetic and
aborted the process (incomplete fix for GHSA-jc8f-p23p-5hjg). An error
is returned instead. (medium)
(GHSA-mw6f-29j3-76f4) Several smaller findings:
heif_image_handle_get_depth_image_handle() and
heif_image_handle_get_depth_image_representation_info() dereferenced a
null pointer on files without a depth image; the TIFF input decoder of
the example tools had an unbounded EXIF tag allocation and a division
by zero on zero YCbCr subsampling; assert()s in the PNG input decoder
are now error returns; integer overflow in the Go binding's
ImageAccess.GetPlane(); heif-view now verifies the decoded frame size
before display. (medium)
(GHSA-8857-r8x5-7499) Undefined behavior (negative shift) in the HDR
bit-depth up-conversion for target bit depths above 16. Such
conversions are now rejected. (low)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit d148168e20)
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
