With this the test verifies not only that Apache can work in
principle, but also that it works with a read-only rootfs. Because of
the read-only rootfs the test itself cannot write to /root, so store
the test download in /tmp.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0c349a8813)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
The previous configuration placed both logs and PID file in /var/logs,
which is not writable with a read-only rootfs (e.g. squashfs), as well
as non-standard. Starting HTTPD during boot failed with:
(30)Read-only file system: AH00091: httpd: could not open error log file /var/logs/error_log.
AH00015: Unable to open logs
An additional issue was that the Buildroot-default --prefix=/usr
override meant various Apache-internal directories (e.g. htdocs) were
placed directly in /usr. Note that the upstream default prefix is
/usr/local/apache2, not /usr/local.
Using the "Debian" layout provides a standard-compatible layout with
logs in /var/log/apache2 and PID file in /var/run/apache2 (both in
tmpfs with the default Buildroot fstab). Both directories need to
exist when the server starts, so handle that in the init script.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1006666f67)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
host-flex/host-bison are needed when building GCC from Git or from a
snapshot, not from release tarballs. The condition for the dependency
was actually incorrect: it was needed for the ARC-specific gcc
version (BR2_GCC_VERSION_ARC) but not for the ARC architecture in
general: building upstream GCC release tarballs for ARC does not
require host-flex/host-bison.
Cc: ARC Maintainers <arc-buildroot@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 4f867f1039)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
A new (and hopefully definitive) CPE is to be used for TF-A:
cpe:2.3:o:trustedfirmware:trusted_firmware-a:
as reported in TF-A directly[1]. NVD correctly reports[2] the new CPE
deprecates the "old" one Buildroot was using.
CVEs for projects under the TrustedFirmware umbrella are now seemingly
handled under the CPE vendor "trustedfirmware".
[1] efd7b189fa%5E%21/
[2] https://nvd.nist.gov/products/cpe/detail/2E1BD3E8-DF65-42E3-A0BA-747137D6DEF2
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit b7cf802ace)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Changes:
Security and robustness release. Notable cramfsck changes:
* Reject dirent names containing "/", "." or ".." to close a path
traversal during `cramfsck -x` (reported in issue #12).
* Open regular files with O_CREAT|O_EXCL during extraction to
prevent duplicate-dirent attacks from truncating files reached
via a previously-extracted symlink.
* Fix outbuffer NUL termination and a 1-byte overflow in
do_symlink when running with both -v and -x.
* Harden romfs_read against truncated/malformed images by
zero-filling the window buffer and checking lseek/read returns.
* Reject directory entries that extend past their parent's size.
Documentation: README now documents cramfsck and lists all current
mkcramfs options; stale hard-link and endianness claims corrected;
NOTES trimmed of the 25-year-old Future Development section.
(See https://github.com/npitre/cramfs-tools/releases/tag/v2.2)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 2c96a67d9b)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project website instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 949063f92b)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project website instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9a7cd39c5d)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project repository instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 47464cfbe1)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project repository instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 16c5253138)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project repository instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 19d11b5235)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project repository instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 55cb1e8eea)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project repository instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit d7f835a4cb)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project repository instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3eda260ff4)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project repository instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 15c4abfa52)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
project repository instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 8f0f84a400)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
The Github repository has been renamed from dracut-ng to dracut. The
wiki still exists, but the actual documentation has been moved to
dracut-ng.github.io.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ec8c6e4487)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Bump dracut package source to the newest version of the project,
dracut-ng, release 110.
The original dracut project is now inactive for a long period of time.
Dracut community has transitioned to the dracut-ng fork to continue
development. The migration ensures regular updates for security and bug
fixing, a better support of modern systemd features and kernel
requirements. It also allows alignment with major Linux distributions
(Fedora, Arch Linux, Gentoo), and other open source projects (Yocto).
Changes made :
- dracut.mk: change source to dracut-ng 110
- dracut.hash: adapt hash to dracut-ng 110
- dracut.mk: fix unused systemd symbolic links build error
- Config.in: adapt fs/cpio/Config.in to mention dracut-ng upgrade
- Config.in.host: adapt dracut Config.in.host to mention dracut-ng upgrade
- .checkpackageignore: remove 001-dracut.sh-don-t-unset-LD_PRELOAD.patch
Patch removals and additions :
- Removed 0001-dracut.sh-don-t-unset-LD_PRELOAD.patch:
Upstream dracut-ng removed the 'unset LD_PRELOAD' instruction, making this
patch obsolete.
- Added 0001-fix-functions-prevent-find_binary-from-dropping-last.patch:
Dracut-ng introduced a regression on non-merged-usr architectures.
This was traced down to a bug in find_binary() where a `while read`
loop drops the last PATH element if the string does not end with a colon.
This local patch fixes the Bash EOF read behavior.
Submitted upstream: https://github.com/dracut-ng/dracut-ng/pull/2416
All dracut related runtime tests, including non-merged-usr, have been
locally tested and passed successfully using the reference Buildroot
docker container.
Signed-off-by: Matéo Pourrier <mateo.pourrier@smile.fr>
[Julien: reword commit log title]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 90304b7129)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Thanks to the OpenEmbedded community for the patches. This fixes the
following vulnerability:
- CVE-2026-29004:
BusyBox before commit 42202bf contains a heap buffer overflow
vulnerability in the DHCPv6 client (udhcpc6) DNS_SERVERS option
handler in networking/udhcp/d6_dhcpc.c that allows network-adjacent
attackers to trigger memory corruption by sending a crafted DHCPv6
response with a malformed D6_OPT_DNS_SERVERS option. Attackers can
exploit incorrect heap buffer allocation calculations in the
option_to_env() function to cause denial of service or achieve
arbitrary code execution on embedded systems without heap hardening.
https://www.cve.org/CVERecord?id=CVE-2026-29004
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
(alternative to commit 5a27004cff)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Based on the work of the OpenEmbedded community. This commit patches the
following vulnerabilities:
- CVE-2026-26157:
A flaw was found in BusyBox. Incomplete path sanitization in its
archive extraction utilities allows an attacker to craft malicious
archives that when extracted, and under specific conditions, may write
to files outside the intended directory. This can lead to arbitrary
file overwrite, potentially enabling code execution through the
modification of sensitive system files.
https://www.cve.org/CVERecord?id=CVE-2026-26157
- CVE-2026-26158:
A flaw was found in BusyBox. This vulnerability allows an attacker to
modify files outside of the intended extraction directory by crafting
a malicious tar archive containing unvalidated hardlink or symlink
entries. If the tar archive is extracted with elevated privileges,
this flaw can lead to privilege escalation, enabling an attacker to
gain unauthorized access to critical system files.
https://www.cve.org/CVERecord?id=CVE-2026-26158
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
(alternative to commit 5a27004cff)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
The patch `0008-awk.c-fix-CVE-2023-42366-bug-15874.patch` was introduced
in [1]. The IGNORE_CVES entry was removed while the patch is still
present in [2].
Re-introduce this IGNORE_CVES entry.
[1] 75c594d446 package/busybox: fix pending CVEs
[2] f88537c46b package/busybox: drop stale IGNORE_CVES entries
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
(alternative to commit 092abbe035)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Localedef is built from the glibc source code, so license information
is the same.
(alternative to commit 187d329d1d)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
This commit patches the following vulnerability:
- CVE-2026-41989:
Libgcrypt before 1.12.2 sometimes allows a heap-based buffer overflow
and denial of service via crafted ECDH ciphertext to gcry_pk_decrypt.
https://www.cve.org/CVERecord?id=CVE-2026-41989
This has already been addressed on the master branch by the package bump
[1].
[1] 93f486ac56 package/libgcrypt: bump version to 1.12.2
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
- CVE-2026-11822:
SQLite before 3.53.2 contains memory corruption vulnerabilities in the
FTS5 full-text search extension that allow attackers to cause process
crashes, memory exhaustion, or arbitrary code execution by supplying a
crafted database with malformed FTS5 page data. Attackers can trigger
an out-of-bounds read in fts5LeafSeek() via an attacker-controlled
loop bound and a heap buffer overflow write in fts5ChunkIterate()
through a crafted continuation page causing an integer underflow,
exploitable when an FTS5 MATCH query is executed against the malicious
database.
- CVE-2026-11824:
SQLite before 3.53.2 contains a heap-based buffer overflow
vulnerability in the FTS5 full-text search extension that allows
attackers to cause a crash or execute arbitrary code by supplying a
crafted database with malicious continuation page metadata specifying
a szLeaf value smaller than 4. Attackers can trigger an integer
underflow in fts5ChunkIterate() causing an inflated remaining byte
count during FTS5 MATCH query processing, leading to a heap buffer
overflow of attacker-controlled data in applications compiled with
SQLITE_ENABLE_FTS5.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-11822
- https://www.cve.org/CVERecord?id=CVE-2026-11824
- https://sqlite.org/src/info/061febcf41ca
- e0b995b2a6
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
- CVE-2026-13595:
A flaw was found in the libblkid library of util-linux. During nested
partition probing, the BSD, Minix, Solaris x86, and UnixWare partition
probers cache a raw pointer to a parent partition entry in a
dynamically allocated array. When subsequent partition additions cause
the array to be reallocated, this pointer becomes stale, leading to a
heap use-after-free read. An attacker who can present a crafted block
device image (for example, via USB insertion or a loop-mounted disk
image) can trigger this flaw without user interaction, as libblkid is
invoked automatically by udev/udisks as root on block-device hot-plug
events. This could lead to limited information disclosure or denial of
service.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-13595
- c0186f14fb
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Commit on master [1] fixed a number of vulnerabilities but the 2025.02.x
branch is still on OpenSSH v9.9p2.
This commit fixes the following vulnerabilities by backporting upstream
patches:
- CVE-2026-59995:
sftp in OpenSSH before 10.4 does not properly constrain the location
of downloaded files when "sftp server:/path ." is used with an
attacker-controlled server.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-59995
- 1b39f39657
- CVE-2026-59996:
scp in OpenSSH before 10.4 may place a file in the parent directory of
an intended directory when the copy occurs between two remote
destinations.
For more information, see:
- 36480181fa
- https://www.cve.org/CVERecord?id=CVE-2026-59996
- CVE-2026-59997:
internal-sftp in sshd in OpenSSH before 10.4 recognizes only the first
9 command-line arguments, which can be important if a later command-
line argument would have helped to ensure the intended security
properties of an SFTP connection.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-59997
- e9916c44c1
- CVE-2026-59999:
In sshd in OpenSSH before 10.4, DisableForwarding=yes was supposed to
take precedence over PermitTunnel=yes, but did not.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-59999
- c805b97b67
- CVE-2026-60000:
sshd in OpenSSH before 10.4 allows remote attackers to cause a denial
of service (resource consumption from excessive authentication
attempts) because MaxAuthTries was mishandled for
GSSAPIAuthentication.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-60000
- 5d04ca6af7
- CVE-2026-60001:
sshd in OpenSSH before 10.4 does not always honor the minimum
authentication delay.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-60001
- d43ba60c91
- CVE-2026-60002:
ssh in OpenSSH before 10.4 can have a use-after-free when a server
changes its host key during a key re-exchange. (This outcome occurs
only on the client side.)
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-60002
- e8bdfb151a
The CVE-2026-59998 is windows specific and thus ignored.
[1] 90add0c09e package/openssh: security bump to version 10.4p1
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
(alternative to commit 90add0c09e)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Fixes following CVE's:
CVE-2026-70368: Fixed an out-of-bounds memory
access triggered by logging attacker-controlled protocol messages longer
than 1,024 bytes (thanks to AISLE Research and Clemens Lang).
CVE-2026-70367: Fixed a SOCKS server mode bypass of the localhost
destination filter using alternate local-address encodings and
interface-scoped IPv6 destinations (thanks to AISLE Research and Clemens
Lang).
Complete Changelog is here:
https://www.stunnel.org/NEWS.html
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 8b6eea299b)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
- Update BOTAN_VERSION to 3.11.1
- Remove 0001-Add-more-value-barriers-to-avoid-compiler-induced-side-channels.patch
as it is already integrated upstream in this version.
Fixed in 3.11.1:
- CVE-2026-34580: Resolve certificate verification bypass bug introduced
in 3.11.0 (GH #5500)
- CVE-2026-34582: Resolve TLS 1.3 client authentication bypass (GH #5599)
Fixed in 3.11.0:
- CVE-2026-32877: Fix a heap over-read during SM2 decryption (GH #5450)
- CVE-2026-32883: Fix an OCSP response forgery vulnerability (GH #5449)
- CVE-2026-32884: Fix a name constraints bypass for DNS names (GH #5448)
- Remove the --disable-altivec configuration option as it has been removed
from the Botan build system in version 3.x
- Optimize the --disable-neon logic using the yx pattern.
In Botan 3.x, the --disable-neon flag is specifically targeted at the
arm32 architecture. Furthermore, Buildroot's BR2_ARM_CPU_HAS_NEON
variable is only defined for 32-bit ARM, which previously caused a
false-positive --disable-neon flag to be passed on AArch64 builds
- Update license.txt hash in botan.hash due to the copyright year update
to 2026
https://botan.randombit.net/news.html#version-3-11-1-2026-03-31
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
[Julien: fix CVE numbers in commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 402c94c2d7)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
- botan dropped the usage of Boost.Filesystem in 2.10.0 [0]
- botan never actively searched for Boost.System, as it is header-only
the dependecy can be dropped too
The only part of boost botan currently uses is asio. So use --with-boost option
when boost is selected.
[0] aff8cc8a7a
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 8ff577bb35)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Changes made in this release:
Ben Wolsieffer (1):
nptl: fix getting main stack size on no-MMU
Max Filippov (4):
stdio: fix %a formatting of inf and nan
stdio: fix radix point output for %a
stdio: output sign with NaNs
stdio: restrict first digit of %a output to 0 or 1
Ramin Moussavi (19):
libintl.h: route stubs through format_arg inlines; fix gettext_noop
build: scope .NOTPARALLEL to locale targets only, restore parallel build
limits.h: define PAGE_SIZE/PAGESIZE like musl, fixing the gdb build
wait4: fall back to waitid(2) at runtime when wait4 returns ENOSYS
pagesize: restore PAGE_SHIFT fallback for binfmt_flat (no auxv)
buildsys: build locale headers in-tree, not via a recursive sub-make
extra/locale: skip locales the build host cannot provide
csky: fix struct semid_ds layout for TIME64
csky: make __kernel_uid_t/__kernel_gid_t 32-bit
hppa: fix inotify/signalfd/timerfd flag values
hppa: do not set IPC_64 for the SysV IPC *ctl commands
x86: fix struct semid_ds layout for TIME64
i386: add CFI to __libc_i386_syscall6 for cancellation unwinding
i386: do not set IPC_64 for the SysV IPC *ctl commands on 5.1+ kernels
buildsys: terminate .eh_frame in shared objects
m68k: make the __jmp_buf layout match what setjmp.S actually saves
inet: use the direct accept4 syscall when __NR_accept is missing
m68k: implement atomic operations with the CAS instruction
libc: fix struct shmid_ds layout for TIME64
Waldemar Brodkorb (10):
netinet/in.h: sync with glibc
bits/fcntl-linux.h: sync with glibc
add copy_file_range syscall wrapper
sys/fanotify.h: drop include to fix c-sky compilation
adjtimex: fix for architectures lacking __NR_clock_adjtime, f.e. frv
sys/user.h: restore required macros
netinet/tcp.h: sync with glibc
loongarch: add basic static only support
riscv: setcontext: fix linking error
bump version for 1.0.59 release
ramin (16):
ldso: harden _dl_tls_get_addr_soft against an unusable DTV
microblaze: implement atomic operations with lwx/swx
ldso: microblaze: add missing addend to R_MICROBLAZE_TLSDTPREL32
ldso: make the _dl_tls_get_addr_soft DTV check microblaze-specific
microblaze: fix struct semid_ds layout for TIME64
m68k: fix struct semid_ds layout for TIME64
mips: fix fallocate() 64-bit argument passing on n32
mips: fix mmap64() for large offsets on n32
mips: fix setjmp() on n32/n64 (.cpreturn, not .cprestore)
mips: always set IPC_64 for the SysV IPC *ctl commands
libc: fix struct msqid_ds layout for TIME64 on all common-header arches
linuxthreads: fix SIGSEGV in MIPS cancellable wrappers (waitpid, nanosleep)
ldso: serialize dl_iterate_phdr to fix concurrent unwind hang on SMP
nptl: cancel the current thread directly instead of via SIGCANCEL
mips: only n32/n64 always need IPC_64, not o32
m68k: use the kernel cmpxchg helper for atomics on ColdFire
Patch 0001 is applied upstream and is removed here.
Fixes:
- https://autobuild.buildroot.net/results/2bd/2bd73b0060cad4f44649ffe4ea60c4775160d86e
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit b94d3eb728)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
New release with following changes:
Adam Lackorzynski (1):
termios.h: Add IBSHIFT
Charles Mirabile (11):
riscv: add defconfigs
riscv: add support for static pie binaries
riscv: add support for ucontext functions
pipe: directly invoke pipe2 from kernel when !UCLIBC_LINUX_SPECIFIC
Fix {g,s}ettimeofday when !UCLIBC_HAS_REALTIME
Fix build with static-pie but without nptl threads
do not remove bits/uClibc_ctype.h when !UCLIBC_HAS_CTYPE_TABLES
getopt-susv3: remove call to gettext `_` macro
readdir{,_r}: remove loop to skip files with d_ino == 0
spawn: allow file actions on no-mmu targets
getopt-susv3: add support for reseting the scan by setting optind to zero
Marcus Haehnel (1):
aarch64/fpu_control.h: Don't use gcc-internal types
Jan Klötzke (1):
elf/dl-support.c: remove unnecessary memset
Ramin Moussavi (9):
libsanitizer: arm/ucontext: fix VFP save/restore to use uc_regspace area
libsanitizer: arm/ucontext.h: add glibc-style REG_R0..REG_R15 aliases
libsanitizer: link.h/dl-iterate-phdr: expose dl_phdr_info TLS fields
libsanitizer: ldso: track _dl_load_adds/_dl_load_subs counters
libsanitizer: ldso: implement _dl_tls_get_addr_soft for dl_phdr_info::dlpi_tls_data
libsanitizer: drop __pagesize, make _dl_pagesize the single source of truth
libsanitizer: sys/user.h: remove obsolete BFD trad-core NBPG/UPAGES defines
libsanitizer: features.h: hard-wire _FILE_OFFSET_BITS=64 to match library's 64-bit off_t/ino_t
libsanitizer: fts.h: drop the bogus _FILE_OFFSET_BITS==64 #error
Waldemar Brodkorb (7):
bits/statx.h: add some missing defines
bits/statx.h: sync struct with glibc
sys/fanotify.h: sync with musl
libiconv: fix typedef of iconv_t
misc: add unicode character functions (c11)
netinet/tcp.h: sync with glibc
bump version for 1.0.58 release
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit c7fef3704c)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
It has been good practice for a while to describe the kind of change
in the commit message of any patch that changes license file
hashes. This is important so any substantial changes don't go
unnoticed. However it wasn't explicitly stated in the manual, fix
that.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ef655b53dd)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
This configuration for the s6lx9 microboard was added back in March 2012
(commit 49084a1982), and has not been
updated in any significant way since then.
This defconfig still use a 4.4.7 (no longer maintained) and out of tree
devicetree (lx9_mmu.dts).
Remove its support.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/14728914045 (s6lx9_microboard_defconfig)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 81490b9592)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
wiki.gnome.org has a big deprecation warning saying "All information
on this site is out of date and should not be used." Point at the
librsvg project on gitlab.gnome.org instead.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit c01426fe96)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
A start script has been missing since the package was added, so the
daemon was not started automatically on sysv/busybox systems.
This also fixes a regression in systemd builds introduced in fccdc6bd,
when the package switched from local unit file to upstream.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 54485e075d)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
libgtk4 passes -Dintrospection=disabled unconditionally, so Gtk-4.0.gir is
never installed. webkitgtk depends on gobject-introspection and generates
WebKit-6.0.gir, which includes Gtk-4.0.gir, so building both fails:
FAILED: WebKit-6.0.gir
Couldn't find include 'Gtk-4.0.gir' (search path:
'['.../usr/share/gir-1.0', ...]')
Tie the option to BR2_PACKAGE_GOBJECT_INTROSPECTION and add the dependency,
the way package/libgtk3 already does. Systems without introspection keep the
previous behaviour.
Signed-off-by: Alsey Coleman Miller <alseycmiller@gmail.com>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit 8c5f774172)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Whether the host libglib2 picks up sysprof support depends on whether
libsysprof-capture happens to be installed on the build machine, which
makes the host build depend on the host environment. Disable sysprof
explicitly for the host build so the result is deterministic.
Keep sysprof enabled for the target build: it is useful to profile and
measure the performance of applications running on the target.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
[Fiona: also apply to package/libglib2/libglib2-bootstrap]
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit c92dc611e5)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Duplicate of lua-argparse.
Note: the argparse package was introduced in Buildroot commit [1].
lua-argparse was introduced in [2]. For consistency with other Lua
packages which has the "lua-" prefix, this commit removes the package
without the prefix.
[1] 169d1632d5
[2] e70abe9716
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 59f9c25d70)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
BR2_ARCH_IS_64 is set for mips64/mips64el even when the n32 ABI is
used, so openblas was built with BINARY=64. Its build system then
passes -mabi=64, which conflicts with the n32 sysroot:
gnu/stubs.h:35:11: fatal error: gnu/stubs-n64_hard.h: No such file
or directory
For openblas, BINARY refers to the pointer size rather than to the
architecture, and n32 uses 32-bit pointers, so BINARY=32 is correct
there.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit fd685fc8c2)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Changelog since 1.0.7
- 1.0.9: This is a bugfix release, fixing minor vulnerabilities
and expanding the test suite.
- 1.0.8: This is a bugfix release, fixing minor security
vulnerabilities and expanding the test suite.
Signed-off-by: Michele Comignano <mcdev@playlinux.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit cd8161a374)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
See the release notes: https://www.samba.org/samba/history/samba-4.22.11.html
This is a security release in order to address the following defects:
o CVE-2026-6949: TSIG packet with name compression can crash DNS
Incorrect size calculations when a TSIG record contains
compressed names can lead to a large out-of-bounds write
causing the server to crash.
https://www.samba.org/samba/security/CVE-2026-6949.html
o CVE-2026-58216: An authenticated user could possibly crash a KDC process
A kpasswd packet that contains malformed ASN.1 might cause
the server to access 6 bytes of unallocated memory. This
memory is not exposed to the user, but in some
circumstances the server could crash.
https://www.samba.org/samba/security/CVE-2026-58216.html
o CVE-2026-58218: DNS signing DoS via TKEY name cache exhaustion
An unauthenticated user can repeatedly register names TKEY
names, which floods a cache causing legitimate TKEYs to be
expunged. This can practically block the use DNS TSIG
signing.
https://www.samba.org/samba/security/CVE-2026-58218.html
o CVE-2026-58221: Samba AD authenticated LDAP access domain takeover
Samba AD low-privilege authenticated LDAP access allows
modifications to internal LDB special DNs, which permits a
domain takeover.
https://www.samba.org/samba/security/CVE-2026-58221.html
o CVE-2026-58222: Samba AD LDAP Compare filter injection and trusted-request
confusion disclose protected attributes
An ordinary authenticated domain user can bypass access
checks and query confidential Active Directory attributes
(such as KDS root keys) via LDAP Compare requests. Due to a
filter injection flaw and trusted execution context, the
LDAP Compare operation can be turned into a
protected-attribute disclosure oracle.
https://www.samba.org/samba/security/CVE-2026-58222.html
o CVE-2026-58224 The CTDB protocol has bounds checking issues
CTDB fails to do integrity checking of received packets.
This includes failure to check field lengths against packet
lengths when unmarshalling packets.
https://www.samba.org/samba/security/CVE-2026-58224.html
(alternative to commit b5e6133eab)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
The --with-systemd option controls only if systemd units are
installed, so there is no build time dependency. Disable systemd
unconditionally for the host package because Buildroot cannot and
should not install systemd units on the host.
Fixes host-p11-kit install error:
install: reguläre Datei '/usr/lib/systemd/user/p11-kit-server.socket' kann nicht angelegt werden: Keine Berechtigung
install: reguläre Datei '/usr/lib/systemd/user/p11-kit-server.service' kann nicht angelegt werden: Keine Berechtigung
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a0cadb4552)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Changelog since 1.0.6:
This is a bugfix release, fixing modest security vulnerabilities
discovered by A. Ramos.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 81f7c82740)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Changelog since 1.0.5:
Fix various minor issues, like theoretical
integer overflows for extreme inputs or NULL
dereferences if the application passes NULL
where it should not.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 6d8a1bb4c8)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Because of wrongly behaving script ./utils/bump-stable-kernel-versions,
the same comment line "From <URL>" has been inserted multiple times in
the Linux hash file.
Remove them, as this is unneeded.
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
https://github.com/strukturag/libheif/releases/tag/v1.23.1
Fixes the following CVEs:
CVE-2026-62289 (GHSA-jc8f-p23p-5hjg)
Integer underflow in Fraction constructor via double clap transform
application
CVE-2026-62291 (GHSA-xpw3-9rhw-482x)
Heap out of bounds write in libheif uncompressed encoder when writing
images with mismatched auxiliary alpha dimensions
CVE-2026-62292 (GHSA-73p7-m7gg-w2jv)
Out-of-bounds read in uncompressed unci tile range slicing
CVE-2026-62377 (GHSA-9ww4-9v47-m7pj)
Reachable assertion in HeifContext::get_track() aborts on a valid-but-
empty HEIF sequence file
(GHSA-46rp-pcq2-rpmr)
Heap out-of-bounds write in the uncompressed encoder for RRGGBB images
with interleaved bit-depth ≤ 8
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit bcb48623fa)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://downloads.isc.org/isc/bind9/9.20.26/doc/arm/html/notes.html#notes-for-bind-9-20-26https://downloads.isc.org/isc/bind9/9.20.26/doc/arm/html/changelog.htmlhttps://seclists.org/oss-sec/2026/q3/208
Fixes
CVE-2026-10723: Incorrect acceptance of NSEC3 records
CVE-2026-10822: Key Record using PRIVATEDNS algorithm may lead to unexpected exit
CVE-2026-11331: Potential wildcard CNAME RPZ policy bypass
CVE-2026-11605: Unnecessary validation of DNSSEC signed records
CVE-2026-11622: Potential memory usage beyond configured limits
CVE-2026-11721: Cache poisoning possible with label count discrepancy, RRSIG, and wildcards
CVE-2026-12617: Record ordering based unexpected exit with CNAME or DNAME
CVE-2026-13204: Unexpected exit in certain situations with NSEC and NSEC3 both present
CVE-2026-13321: DNSSEC Validation Bypass via Out-of-Zone NSEC Next Field
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Julien: update pgp key id in hash file comment]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 8c96a8981f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
A few headers outside libiberty use LGPL-2.1+, too, and other headers
and some scripts use GPL-2.0+.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 95b77f7a71)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BSD-0-Clause is not a recognized SPDX license identifier. 0BSD is used
in the source SPDX-License-Identifier headers, and the associated text
[1] matches the COPYING.0BSD file.
FSFUL and FSFULLR are the "few permissive licenses" of certain build
system files mentioned in COPYING.
Move "Public Domain" to the end of the list because it applies only to
a few files.
[1] https://spdx.org/licenses/0BSD.html
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 15e2433e1f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The package is part of Buildroot and thus under GPL-2.0-or-later
unless stated otherwise, as described in COPYING.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 0f80126bfe)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The package is part of Buildroot and thus under GPL-2.0-or-later
unless stated otherwise, as described in COPYING.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit c19a7fad93)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The package is part of Buildroot and thus under GPL-2.0-or-later
unless stated otherwise, as described in COPYING.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9b8a2d8633)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The package is part of Buildroot and thus under GPL-2.0-or-later
unless stated otherwise, as described in COPYING.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 770b684426)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
All these packages are part of Buildroot and thus under
GPL-2.0-or-later unless stated otherwise, as described in COPYING.
package/skeleton-custom is excluded because it provides a way to copy
skeleton data from any location chosen by the user, the license of
which is unknown to Buildroot.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 927c575964)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://matt.ucc.asn.au/dropbear/CHANGES
- Security: Fix a use-after-free in X11 forwarding that could possibly lead
to memory corruption. This is vulnerable to authenticated users if X11
forwarding is enabled. By default X11 forwarding is not built.
In 2026.89 the server is running as the authenticated user for X11
forwarding, in earlier versions it runs as root.
This removes X11 "single connection" which has probably never been used.
Reported by @peter-pe
882f83806d
Added patch to fix build errors which would be introduced by this bump:
86baa66fc9
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 0c8bd5739c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://gitlab.com/libssh/libssh-mirror/-/tags/libssh-0.11.5https://www.libssh.org/2026/07/21/libssh-0-12-1-and-0-11-5-security-release
s/
Fixes the following security problems:
CVE-2026-15370: Stack buffer overflow in SFTP server longname construction
CVE-2026-59843: Denial of service via zero advertised channel packet size
CVE-2026-59844: Denial of service via oversized SFTP read length
CVE-2026-59845: Denial of service via unchecked ProxyCommand fork() failure
CVE-2026-59846: Information disclosure via ProxyCommand %r username expansion
CVE-2026-59847: Integrity downgrade via OpenSSL AES-GCM tag verification
CVE-2026-59848: Denial of service via SFTP responses with unknown request IDs
CVE-2026-59849: Denial of service via automatic certificate authentication loop
CVE-2026-59850: Use-after-free via data callbacks on closed channels
Zero-initialize every ssh_string
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 93e7a673e8)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
"bzip2-1.0.4" is not a valid SPDX license identifier. The license text
in archival/libarchive/bz/LICENSE in the busybox source matches the
text associated with the bzip2-1.0.6 identifier [1].
[1] https://spdx.org/licenses/bzip2-1.0.6.html
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit f9687af626)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The Nettle manual (nettle.html in the source archive) states:
> Nettle is dual licenced under the GNU General Public License version
> 2 or later, and the GNU Lesser General Public License version 3 or
> later. When using Nettle, you must comply fully with all conditions
> of at least one of these licenses. [...]
This means "or" is the correct description. Ellipsis covers a note
that a few files are licensed more permissively.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9a77d5547a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
All these bundled subprojects explicitly give "Apache-2.0 OR
LGPL-2.1-or-later" in their README.md files.
Signed-off-by: Fiona Klute (Othermo GmbH) <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 0c2b14a8b5)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The patch 0002-Makefile.am-fix-build-without-makeinfo.patch is not longer
needed since it builds even if 'makeinfo' is not installed, so it's removed.
For release annoucne, see:
https://lists.gnu.org/archive/html/info-gnu/2025-12/msg00002.html
Changelog:
Changes are detailed in the git repo logs:
$ git clone git://git.sv.gnu.org/guile.git
$ git whatchanged
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
[Julien:
- remove .checkpackageignore entry to fix check-package error
- add link to release announce
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 643f480f43)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issues:
CVE-2026-39822: os: root escape via symlink plus trailing slash
go1.26.5 (released 2026-07-07) includes security fixes to the
crypto/tls and os packages, as well as bug fixes to the compiler,
the runtime, the go command, and the net, os, and syscall packages.
https://go.dev/doc/devel/release#go1.26.5
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 6e12744652)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
When building pahole using a modern GCC (e.g. when building
host-pahole), discarded-qualifiers warnings are produced. In builds that
don't set CMAKE_BUILD_TYPE=Release, -Werror gets set and causes a build
failure.
Fix this by backporting the applicable parts of an upstream patch and
fixing a remaining issue that implicitly got refactored away upstream
already.
Signed-off-by: Florian Larysch <fl@n621.de>
(cherry picked from commit 8419f0f0c7)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Boot an armv5 image running the mdnsd responder alongside the mquery
client, then check that service discovery works: mquery browses for the
bundled _http._tcp service and mdnsd, on the same host, answers over the
loopback of the eth0 multicast group.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[Julien: add "mdnsd -v" invocation to show version]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 4cd5559163)
[Thomas: remove last test that requires v1.1]
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/tuxera/ntfs-3g/wiki/NTFS-3G-Release-Historyhttps://seclists.org/oss-sec/2026/q3/152
Multiple vulnerabilities have been discovered in ntfs-3g.
A new version 2026.7.7 is now available at https://github.com/tuxera/ntfs-3g
(ntfscat) Fix heap memory corruption when processing a corrupt or maliciously crafted filesystem. (CVE-2026-42616)
Fix heap memory corruption when copying index data from root to an index block in a corrupt or maliciously crafted filesystem. (CVE-2026-42617)
Fix single-byte heap buffer overflow when decompressing maliciously crafted compressed file data. (CVE-2026-42618)
Fix heap buffer overflow when copying the tail data of an index block to a freshly allocated block. (CVE-2026-46569)
Fix out-of-bounds read when processing symlink reparse data in a corrupt or maliciously crafted filesystem. (CVE-2026-46571)
Fix heap memory corruption for maliciously crafted or corrupt index data descending to an out-of-bounds tree depth. (CVE-2026-46570)
Fix heap buffer overflow for maliciously crafted or corrupt index data during a node split. (CVE-2026-46572)
Fix heap buffer overflow when building inherited ACL data. (CVE-2026-56135)
Fix out of bounds access when clearing an index root in maliciously crafted or corrupt index data. (CVE-2026-56136)
Switched to sha256 tarball hash provided by upstream.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 26811cb110)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
During its configure step, libgpg-error needs awk:
configure -> src/gen-lock-obj.sh -> objdump + awk on test binary
This call is used on the output from objdump on a test binary to
retrieve the size of some data structure, and generate accordingly an
internal header (lock-obj-pub.native.h). However, libgpg-error buildroot
package does not depend explicitely on host-gawk: if host-gawk is not
part of the build, or if it is built later than libgpg-error,
libgpg-error autotool tooling will eventually pick the build machine
awk. On top of this issue, despite the configure.ac suggesting that it
supports different implementations of awk, libgpg-error configure step
will not parse correctly the output from objdump when using mawk,
leading to a wrong lock-obj-pub.native.h header being generated:
With gawk:
typedef struct
{
long _vers;
union {
volatile char _priv[24];
long _x_align;
long *_xp_align;
} u;
} gpgrt_lock_t;
#define GPGRT_LOCK_INITIALIZER {1,{{0,0,0,0,0,0,0,0, \
0,0,0,0,0,0,0,0, \
0,0,0,0,0,0,0,0}}}
With mawk:
typedef struct
{
long _vers;
union {
volatile char _priv[0];
long _x_align;
long *_xp_align;
} u;
} gpgrt_lock_t;
#define GPGRT_LOCK_INITIALIZER {1,{{}}}
This issue has been observed for example on Debian 13 with mawk
installed: it fails to parse mtx_size, leading to a size 0, and so
generating crashes at runtime because of the invalid size embedded in
libgpg-error.
Side note: the lock-obj-pub.native.h header file is correctly
generated, when using mawk 1.3.4 20200120 from Debian 12.
The described issue happen with mawk 1.3.4 20250131 from Debian 13.
libgpg-error should be fixed upstream to properly handle this data
structure size guessing even when using mawk, but anyway the
corresponding buildroot package should not randomly use the build
machine host tooling or buildroot-provided host tooling depending on
whether host-gawk has been selected and built before it.
Enforce an explicit dependency on host-gawk for libgpg-error to make
sure that it systematically uses the buildroot-provided awk.
Co-developped-by: Bernard Gautier <bernard.gautier@nav-timing.safrangroup.com>
Signed-off-by: Bernard Gautier <bernard.gautier@nav-timing.safrangroup.com>
Co-developped-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
[Julien: add the side note that mawk from debian 12 works]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 21bf78411e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
libcamera has moved for a while now to gitlab.freedesktop.org. The
mirror on git.linuxtv.org is still active, but it isn't the canonical
repository and has less bandwidth than freedesktop.org. Switch the
libcamera source URL to gitlab.freedesktop.org.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Julien: removed trailing slash in _SITE]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 138713f39a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://matt.ucc.asn.au/dropbear/CHANGES
- Security: server: Don't allow -B (accept blank password) with
-t (two factor auth). If run with -t and -B a user configured with a
blank password would be allowed to log in without pubkey auth.
23ec782856
Reported by nvidia
- Security: server: Fix parsing of long authorized_keys lines.
The remainder of a long line would be handled as the start of a new line.
In the case where external programs add semi-trusted public keys to
authorized_keys, a crafted key might bypass restrictions such as "command=".
8d8e1930b8
Reported by nvidia
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ce9ed75bbc)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The Debian 12 Bookworm snapshot we use, 20250203, uses the new deb822
format [0] for source list files; it carries a source list file that
points to the current repository, not to the snapshot.
Even though we do inject an old-style source list that points to the
snapshot repository, the packages in the current repository are more
recent than the one in the snapshot, so when we install our packages,
they get retrieved mostly from the current repository rather than from
the snapshot. The image is not reproducible.
Switch to using the new deb822-style source list file.
Note: we do not need to carry the "Latest just before" trick: the
snapshot repository will use the most recent actual snapshot before the
requested dated, so we can just use the date of the image we use (stuck
at midnight because we don't have better).
Since the snapshot repository can be really slow, while at the same time
the remote http server not dropping connections, it can take a very long
while to build the image; add a timeout so that stale connections are
detected and re-attemped early-ish (the timeout applies to both the
connect and the actual download, so it should be large enough to
accomodate slowish network connections).
Fixes: c95d5b8e1e (support/docker: move to current bookworm (Debian
12) snapshot)
[0] https://manpages.debian.org/trixie/apt/sources.list.5.en.html#DEB822-STYLE_FORMAT
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 3460675872)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Bump qt5 packages to latest submodule versions from
https://invent.kde.org/qt/qt/qt5/-/tree/kde/5.15
qtbase repo is a few commits after a tag named v5.15.18-lts-lgpl so
assume it's now 5.15.18.
qt5base patches are updated to make them apply silently and cleanly.
For qt5webengine-chromium:
- 0001-Add-python3-build-support.patc is removed as commit 68302c9ea158
("Enable building with Python 3") contains similar changes,
- 0004-Migrate-presubmit-to-python3.patch is only partially kept as
commit 68302c9ea158 ("Enable building with Python 3") contains similar
changes,
- 0006-Fix-build-in-Python-3.11-invalid-mode-rU.patch is only partially
kept as commit 68302c9ea158 ("Enable building with Python 3") contains
similar changes,
- 0007-Replace-imp.load_source-with-importlib-equivalent.patch is
removed as commit 68302c9ea158 ("Enable building with Python 3")
contains similar changes,
- 0010-Fix-building-with-system-libxml2.patch is removed as commit
c98d28f2f0f2 ("Fix building with system libxml2") contains similar
changes,
- 0012-Include-cstdint-for-uintptr_t-uint8_t-etc.patch is renamed
0009-Include-cstdint-for-uintptr_t-uint8_t-etc.patch and contains more
file patching to make qt5webengine build again,
Also make sure that the patches that have an upstream reference use the
proper Upstream: tag, so we can remove them from checkpackageignore.
For qt5webengine:
- 0002-Add-python3-build-support.patch is removed as commit 2294cc4ed5fd
("Add option to chose python version for building 5.15 WebEngine")
contains similar changes. It now supports both Python2 and Python3 and
defaults to Python2 if found first. This can be overridden with
-webengine-python-version python3 in QT5WEBENGINE_CONF_OPTS but this
was unnecessary in my tests as Python3 was properly selected from
$(HOST_DIR)/bin/.
qt5webengine-chromium is updated with qt5webengine following the logic
stated in Buildroot commit c53455ea4f
("package/qt5/qt5webengine-chromium: bump version after qtwebengine
bump").
I am unsure whether qt5webengine-chromium-catapult also requires an
update.
(cherry picked from commit ff4243147d)
[qt5webengine-chromium/0011-Shorted-printed-cmd-when-long-commands-fail.patch
doesn't exist in 2025.02.x, file renaming not done]
[qt5webengine-chromium/0012-Include-cstdint-for-uintptr_t-uint8_t-etc.patch
is named 0011-Include-cstdint-for-uintptr_t-uint8_t-etc.patch in
2025.02.x, adapt renaming]
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
[Arnout: fix Upstream: tags]
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Release notes:
https://webkitgtk.org/2026/06/02/webkitgtk2.52.4-released.html
Fixes the following security issues:
https://webkitgtk.org/security/WSA-2026-0003.html
Includes fixes (among others) for CVE-2026-28847, CVE-2026-28883,
CVE-2026-28901, CVE-2026-28902, CVE-2026-28903, CVE-2026-28904,
CVE-2026-28905, CVE-2026-28907, CVE-2026-28942, CVE-2026-28946,
CVE-2026-28947, CVE-2026-28953, CVE-2026-28955, CVE-2026-28958,
CVE-2026-43658, and CVE-2026-43660.
Also added 0001-REGRESSION-313606-main-Fails-to-build-with-system-ma.patch,
to get webkitgtk compiled when -DUSE_SYSTEM_MALLOC=ON is in use.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
[Julien: add "security" in commit log title]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 013612b496)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2025-64503:
cups-filters contains backends, filters, and other software required
to get the cups printing service working on operating systems other
than macos. In cups-filters prior to 1.28.18, by crafting a PDF file
with a large `MediaBox` value, an attacker can cause CUPS-Filter 1.x’s
`pdftoraster` tool to write beyond the bounds of an array. First, a
PDF with a large `MediaBox` width value causes `header.cupsWidth` to
become large. Next, the calculation of `bytesPerLine =
(header.cupsBitsPerPixel * header.cupsWidth + 7) / 8` overflows,
resulting in a small value. Then, `lineBuf` is allocated with the
small `bytesPerLine` size. Finally, `convertLineChunked` calls
`writePixel8`, which attempts to write to `lineBuf` outside of its
buffer size (out of bounds write). In libcupsfilters, the maintainers
found the same `bytesPerLine` multiplication without overflow check,
but the provided test case does not cause an overflow there, because
the values are different. Commit
50d94ca0f2fa6177613c97c59791bde568631865 contains a patch, which is
incorporated into cups-filters version 1.28.18.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2025-64503
- 50d94ca0f2
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit def2405f39)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2026-34933:
Avahi is a system which facilitates service discovery on a local
network via the mDNS/DNS-SD protocol suite. Prior to version 0.9-rc4,
any unprivileged local user can crash avahi-daemon by sending a single
D-Bus method call with conflicting publish flags. This issue has been
patched in version 0.9-rc4.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-34933
- 0be89b6bb5
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 88f3b8366b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See the release notes: https://www.php.net/ChangeLog-8.php#8.3.32
This fixes 2 vulnerabilities:
- CVE-2026-12184: Segfault in file_get_contents w/ a https URL and a proxy set
- CVE-2026-14355: Memory corruption (zend_mm_heap corrupted) in
openssl_encrypt with AES-WRAP-PAD
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The 'mlkem.h' header is no longer present in wolfssl v5.9.2 [1] and the
content was merged in the 'wc_mlkem.h' header.
[1] 7a2cf5b655
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 275faf6d61)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Changes with nginx 1.30.3
*) Security: a heap memory buffer overflow might occur in a worker
process when using a configuration with "ignore_invalid_headers off;"
and "large_client_header_buffers" with large configured values when
proxying a specially crafted request to HTTP/2 or gRPC backend,
allowing an attacker to cause worker process memory corruption or
segmentation fault in a worker process (CVE-2026-42055).
Thanks to Mufeed VH of Winfunc Research.
*) Security: a heap memory buffer overread might occur in a worker
process while handling a specially sent response with decoding from
UTF-8 via the "charset_map" directive, allowing an attacker to cause
a limited disclosure of worker process memory or segmentation fault
in a worker process (CVE-2026-48142).
Thanks to Han Yan of Xiaomi and p4p3r of CYBERONE.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9b8c65a6c1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See here for a complete Changelog:
https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-22-current.html
Security Fixes:
GHSA-3g56-cgrh-95p5: chan_unistim DIALPAGE digit handling can overflow phone_number and crash Asterisk
GHSA-3rhj-hhw7-m6fw: NULL Pointer Dereference in HTTP AMI Digest Authentication
GHSA-4pgv-j3mr-3rcp: Reflected XSS in Phone Provisioning HTTP Error Pages
GHSA-589g-qgf8-m6mx: Stack buffer overflow in MWI NOTIFY Message-Account parsing
GHSA-746q-794h-cc7f: Out-of-Bounds Read in Q.931 Information Element Parser (H.323 Addon)
GHSA-8jhw-m2hg-vp3h: Heap Buffer Overflow in OGG/Speex File Playback (format_ogg_speex)
GHSA-8jw3-ccr9-xrmf: Buffer over-read in Asterisk PJSIP MWI body parser
GHSA-g8q2-p36q-94f6: Heap-use-after-free in Asterisk PJSIP TCP/SDP handling when TCP connection closes during SDP processing
GHSA-h5hv-jmgj-92q2: CVE-2022-37325 fix is absent from current chan_ooh323 Q.931 party-number parser
GHSA-j2mm-57pq-jh94: Possible RED T.140 Generation Accumulation OOB Write
GHSA-mxgm-8c6f-5p8f: Stack buffer overflow in res_xmpp XMPP namespace prefix handling
GHSA-ph27-3m5q-mj5m: SQL Injection in cel_pgsql and cel_tds via CELGenUserEvent eventtype Field
GHSA-q9fr-m7g8-6ph5: Asterisk app_sms.c copies externally controlled SMS lengths into fixed in-struct buffers
GHSA-qf8j-jp7h-c5hx: Out-of-Bounds Write in Codec2 Decoder Due to Floor/Ceil Sample Count Mismatch
GHSA-r6c2-hwc2-j4mp: LDAP Filter Injection in res_config_ldap via SIP Username (Unauthenticated Information Disclosure)
GHSA-vfhr-r9x9-c687: Possible RED T.140 Heap Buffer Overflow
GHSA-vrfp-mg3q-3959: ARI setChannelVar bypasses live_dangerously and permits FILE() writes
GHSA-wcvv-g26m-wx5c: ARI REST-over-WebSocket read-only bypass allows arbitrary module path load and conditional RCE
GHSA-x348-j6c9-77f3: Stack Buffer Overflow in H.323 ooTrace() via Unbounded vsprintf into Fixed 2048-byte Buffer
GHSA-xgj6-2gc5-5x9c: ast_loggrabber executes python script in world writable directory(/tmp) leading to potential privilege escalation And RCE
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7f48325de6)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
For more information on the release, see:
- https://mariadb.com/docs/release-notes/community-server/10.11/10.11.18
It fixes the following vulnerabilities:
- CVE-2026-48163:
MariaDB server is a community developed fork of MySQL server. From
versions 10.6.1 to before 10.6.27, 10.11.1 to before 10.11.18, 11.4.1
to before 11.4.12, 11.8.1 to before 11.8.8, and 12.3.1, during the SST
the donor node is interpolating parameters that the joiner sent into
the command line. Not all parameters were properly validated which
could allow a malicious joiner to execute arbitrary shell commands on
the donor side via the rsync SST method. This issue has been patched
in versions 10.6.27, 10.11.18, 11.4.12, 11.8.8, and 12.3.2.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-48163
- CVE-2026-48165:
MariaDB server is a community developed fork of MySQL server. From
versions 10.6.1 to before 10.6.27, 10.11.1 to before 10.11.18, 11.4.1
to before 11.4.12, 11.8.1 to before 11.8.8, and 12.3.1, a high-
privileged MariaDB user could've used wsrep_sst_receive_address or
wsrep_sst_donor global system variables to execute shell commands as
the uid of the mariadbd process on the galera joiner node. This issue
has been patched in versions 10.6.27, 10.11.18, 11.4.12, 11.8.8, and
12.3.2.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-48165
- CVE-2026-49261:
MariaDB server is a community developed fork of MySQL server. Versions
10.6.1 through 10.6.26, 10.11.1 through 10.11.17, 11.4.1 through
11.4.11, 11.8.1 through 11.8.7, and 12.3.1 with `wsrep_notify_cmd`
enabled would execute shell commands embedded in the name of the
joiner node. This is fixed in 10.6.27, 10.11.18, 11.4.12, 11.8.8, and
12.3.2. As a workaround, anyone who cannot upgrade now should disable
`wsrep_notify_cmd`.
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-49261
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit c69f28ae5c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In the precedent patch "support/testing: test_gnupg2.py: use
assertRunNotOk()" [1] a small typo (OK instead of Ok) was introduced
in the test_gnupg2.py file, which caused a runtime failure.
This patch simply replace "self.assertRunNotOK(cmd)" with
"self.assertRunNotOk(cmd)" to correct this typo.
[1] cb791850ad
Signed-off-by: Dowan Gullient <dowan.gullient@smile.fr>
[Fiona: fix commit message formatting]
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit cfd7483a26)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-55200:
libssh2 through 1.11.1, fixed in commit 97acf3df contains an out-of-
bounds write vulnerability in ssh2_transport_read() that fails to
enforce upper bounds on packet_length field. Remote attackers can send
crafted SSH packets with excessively large packet_length values to
corrupt heap memory and achieve remote code execution.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-55200
- 97acf3dfda
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit c5aa932745)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following vulnerability:
- CVE-2026-55199:
libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-
authentication denial of service vulnerability in the SSH_MSG_EXT_INFO
handler in src/packet.c that allows a malicious SSH server to cause a
client CPU exhaustion loop by sending a crafted extension count value.
A malicious server can set nr_extensions to 0xFFFFFFFF during key
exchange, causing the client to spin in a tight CPU loop for over 60
seconds because return values from _libssh2_get_string() are unchecked
and the session timeout does not apply to CPU-bound loops.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-55199
- 17626857d2
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit 3c8cfad804)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-6192:
A vulnerability was identified in uclouvain openjpeg up to 2.5.4. This
impacts the function opj_pi_initialise_encode in the library
src/lib/openjp2/pi.c. The manipulation leads to integer overflow. The
attack must be carried out locally. The exploit is publicly available
and might be used. The identifier of the patch is
839936aa33eb8899bbbd80fda02796bb65068951. It is suggested to install a
patch to address this issue.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-6192
- 839936aa33
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit 353007cf40)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The sample script would've passed even if the connections list was
empty. Check that there is at least one connection, and that the
sample script can read loopback device information.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit f38f5bb593)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In 11aa1cfa5a the patch was accidentally
moved into a versioned directory with the wrong version (2.82.0
instead of 2.82.4) and thus not applied. However, there have been no
issues reported.
The patch description mentions being needed to fix build errors in
package/atk and package/libnice. It was originally added in
b094f88a4d, and amended for libnice in
2c916b400b. package/atk was removed in
2c3ca7bea1, because atk has been merged
into at-spi2-core. Both at-spi2-core and libnice are Meson packages,
as was atk at the time of its removal.
Both current packages build with the following configuration (tested
using utils/test-pkg):
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_GOBJECT_INTROSPECTION=y
BR2_PACKAGE_LIBNICE=y
BR2_PACKAGE_AT_SPI2_CORE=y
Evidently the patch is no longer needed, presumably because the
correct search path for GIR files is set by other means, and we can
remove it instead of fixing the version number of the patch directory.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Tested-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c9fabfcb9f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Libglib2-bootstrap is only used as dependency to build
gobject-introspection and then libglib2 with GOI support. It should
not be installed to target, even if in practice libglib2 should
overwrite anything it has installed.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 866462e8dd)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following vulnerabilities:
GLIBC-SA-2026-0009:
===================
scanf %mc off-by-one heap buffer overflow
Calling the scanf family of functions with a %mc (malloc'd character
match) in the GNU C Library version 2.7 to version 2.43 with a format
width specifier with an explicit width greater than 1024 could result in
a one byte heap buffer overflow.
The bug is in the buffer growth formula in __vfscanf_internal, which
under-allocates by one byte during realloc expansion, allowing a
controlled single-byte overwrite past the end of the heap buffer.
The impact is limited by the fact that to execute the overwrite you need
both user controlled input data and a specific choice of maximum width
that yields a smaller than needed allocation. The latter point has to
take into account malloc's particular chunk size rounding process. The
"%[width]mc" format specifier does not appear to have notable use in
major Linux-based OS distributions, due to which the real world impact
may be limited to bespoke use cases.
CVE-Id: CVE-2026-5450
GLIBC-SA-2026-0010:
===================
Potential buffer under-read in ungetwc
Calling the ungetwc function on a FILE stream with wide characters
encoded in a character set that has overlaps between its single byte and
multi-byte character encodings, in the GNU C Library version 2.43 or
earlier, may result in an attempt to read bytes before an allocated
buffer, potentially resulting in unintentional disclosure of neighboring
data in the heap, or a program crash.
A bug in the wide character pushback implementation
(_IO_wdefault_pbackfail in libio/wgenops.c) causes ungetwc() to operate
on the regular character buffer (fp->_IO_read_ptr) instead of the actual
wide-stream read pointer (fp->_wide_data->_IO_read_ptr). The program
crash may happen in cases where fp->_IO_read_ptr is not initialized and
hence points to NULL. The buffer under-read requires a special situation
where the input character encoding is such that there are overlaps
between single byte representations and multibyte representations in
that encoding, resulting in spurious matches. The spurious match case
is not possible in the standard Unicode character sets.
CVE-Id: CVE-2026-5928
https://inbox.sourceware.org/libc-announce/b11f0003-6ec1-4bd6-b9de-9e38a4efeca3@redhat.com/T/
git shortlog b676adadbc1f5fb2f31bc484a7628cca89ae6f22..
DJ Delorie (1):
stdio-common: Allow partially-filled %mc buffers [BZ #12701]
Florian Weimer (1):
iconv: Suppress intermediate errors with //TRANSLIT (bug 34236)
Maciej W. Rozycki (2):
support: Implement 'xfmemopen' for seamless 'fmemopen' use
stdio-common: Reject insufficient character data in scanf [BZ #12701]
Rocket Ma (2):
libio: Fix ungetwc operating on byte stream [BZ #33998]
stdio-common: Fix buffer overflow in scanf %mc [BZ #34008]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes CVE-2025-14087: A flaw was found in GLib (Gnome Lib). This
vulnerability allows a remote attacker to cause heap corruption, leading to
a denial of service or potential code execution via a buffer-underflow in
the GVariant parser when processing maliciously crafted input strings.
https://gitlab.gnome.org/GNOME/glib/-/issues/3834
The fixes were applied upstream as part of 2.86.3, so backport them for the
2.82.5 version currently used by Buildroot LTS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-33526:
Squid is a caching proxy for the Web. Prior to version 7.5, due to
heap Use-After-Free, Squid is vulnerable to Denial of Service when
handling ICP traffic. This problem allows a remote attacker to perform
a reliable and repeatable Denial of Service attack against the Squid
service using ICP protocol. This attack is limited to Squid
deployments that explicitly enable ICP support (i.e. configure non-
zero `icp_port`). This problem _cannot_ be mitigated by denying ICP
queries using `icp_access` rules. Version 7.5 contains a patch.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-33526
- 8138e909d2
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-33515:
Squid is a caching proxy for the Web. Prior to version 7.5, due to
improper input validation, Squid is vulnerable to out of bounds read
when handling ICP traffic. This problem allows a remote attacker to
receive small amounts of memory potentially containing sensitive
information when responding with errors to invalid ICP requests. This
attack is limited to Squid deployments that explicitly enable ICP
support (i.e. configure non-zero `icp_port`). This problem cannot be
mitigated by denying ICP queries using `icp_access` rules. Version 7.5
contains a patch.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-33515
- 8138e909d2
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-28525:
SWUpdate contains an integer underflow vulnerability in the multipart
upload parser in mongoose_multipart.c that allows unauthenticated
attackers to cause a denial of service by sending a crafted HTTP POST
request to /upload with a malformed multipart boundary and controlled
TCP stream timing. Attackers can trigger an integer underflow in the
mg_http_multipart_continue_wait_for_chunk() function when the buffer
length falls within a specific range, causing an out-of-bounds heap
read past the allocated receive buffer to a local IPC socket.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-28525
- beee2dc0fe
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
(cherry picked from commit 0c6595aaac)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-53614
The SUID binary /usr/bin/mount from util-linux trusts the
environment variable LIBMOUNT_FORCE_MOUNT2 via a raw getenv() call
in libmount/src/hook_mount.c. An unprivileged user can set
LIBMOUNT_FORCE_MOUNT2=always to force the mount process to use the
legacy (non-atomic) bind mount path instead of the secure new mount
API path.
In the legacy path, a bind mount is performed in two separate
syscalls: first mount(src, tgt, MS_BIND) which exposes the source
directory without security flags, then mount(tgt,
MS_REMOUNT|MS_BIND|MS_NOSUID|MS_NOEXEC|MS_NODEV) which applies the
flags. Between these two syscalls, a brief window exists where the
bind-mounted directory is visible without nosuid/noexec protection.
A concurrent process can execute a SUID binary from the bind target
during this window.
For more information, see:
- https://github.com/util-linux/util-linux/security/advisories/GHSA-67r7-8m5w-22wx
- cc81bbcec5
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-53613
A TOCTOU vulnerability exists in the SUID binary /usr/bin/mount from
util-linux. When processing restricted (non-root) mount requests,
libmount validates the mount target against /etc/fstab entries and
checks user permissions, but the actual mount()/move_mount() syscall
re-resolves the target pathname. An attacker can use
renameat2(RENAME_EXCHANGE) to atomically swap an ancestor directory
of the mount target between the permission check and the mount
syscall, redirecting an authorized user-directory mount to any
root-owned path (e.g., /etc/sudoers.d).
For more information, see:
- https://github.com/util-linux/util-linux/security/advisories/GHSA-8gj5-72r3-428g
- b639bf5c42
- 0b010025a0
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-53612
A TOCTOU (Time-of-Check-Time-of-Use) vulnerability exists in the
SUID binary /usr/bin/mount from util-linux. The hook_owner.c
post-mount hook performs path-based chmod() and lchown() operations
on the mount target after mount() has completed, without verifying
that the target path still resolves to the same filesystem object.
An unprivileged local user can exploit this race window using
renameat2(RENAME_EXCHANGE) to redirect the chmod()/lchown() to an
arbitrary path, achieving arbitrary permission/ownership
modification on any file or directory.
For more information, see:
- https://github.com/util-linux/util-linux/security/advisories/GHSA-g8wm-75wr-g2vh
- d0c5adaeb3
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2025-14104:
A flaw was found in util-linux. This vulnerability allows a heap
buffer overread when processing 256-byte usernames, specifically
within the `setpwnam()` function, affecting SUID (Set User ID) login-
utils utilities writing to the password database.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2025-14104
- aaa9e718c8
- 9a36d77012
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
As indicated in the release notes:
https://github.com/cesanta/mongoose/releases/tag/7.22
This release includes a substantial number of security fixes,
reflecting increased use of AI-powered security tools and valuable
contributions from the security research community.
Please note that many of the resolved issues have not yet been assigned
CVE identifiers. The assignment process is underway, and these release
notes will be updated as additional CVEs become available.
Given the large number of security fixes included in that release, bump the
version for Buildroot LTS instead of applying individual patches
Along with the version bump:
- Remove patch for a security issue fixed by the version bump
- Update license hash following the update of the copyright year in
1f9e1a38b5
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit 8fe41d5506)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commit f89ca996b6 fixed the
build of linux-pam with musl in 2020 but did not remove the restric-
tions in place for login/runuser/su which were added earlier with
these commits:
login (2015): 25ecd24579
runuser (2017): 09860f354a
su (2017): c6488923fb
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
(cherry picked from commit 91d356ee7e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2026-11940:
tarfile.extractall() with the 'data' or 'tar' filter could be
bypassed by a crafted archive where a hardlink references a symlink
stored at a deeper name than the hardlink itself. The extraction
fallback validated the symlink at it's archived location but
recreated it at the hardlink's shallower path, letting a relative
target the filter judged contained escape the destination directory.
This allowed a malicious tar archive to create a symlink pointing
outside the destination, enabling out-of-destination file reads or
writes. This was an incomplete fix of CVE-2025-4330.
https://www.cve.org/CVERecord?id=CVE-2026-11940
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit 1a0164ac81)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Libepoxy is a library for handling OpenGL function pointer management.
It has backends for egl/glx, which may at one point have been mandatory
to enable, but the library now builds with none of the above enabled
features, as seen below.
libepoxy 1.5.10
User defined options
Cross files : /home/joseph/br-test-pkg/arm-aarch64/build/libepoxy-1.5.10//buildroot-build/cross-compilation.conf
b_pie : false
b_staticpic : true
buildtype : release
build.cmake_prefix_path: /home/joseph/br-test-pkg/arm-aarch64/host/lib/cmake
default_library : shared
docs : false
egl : no
glx : no
libdir : lib
build.pkg_config_path : /home/joseph/br-test-pkg/arm-aarch64/host/lib/pkgconfig
prefix : /usr
strip : false
tests : false
x11 : false
Removing these dependencies allows for some applications that require it
as a build dependency, but otherwise can run headless or without GL, to
build and function, using other graphics APIs or display pipelines.
Weston, for example, can still use Vulkan and DRM when linked to
libepoxy without GL/EGL/X11 support.
Acked-by: Arnout Vanecappelle <arnout@rnout.be>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit cd2583ca0a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit e8c54ffb3d ("utils/generate-cyclonedx: generate vcs
externalReferences for source repos") added externalReferences to the source
code of packages.
This unfortunately causes issues with packages (in br2-external) fetching
from git using the scp-like syntax, E.G.:
FOO_SITE_METHOD = git
FOO_SITE = git@github.com:<project>/<repo>.git
Which ends up in the SBOM as:
[
{
"type": "vcs",
"url": "git@github.com:<project>/<repo>.git",
"comment": "git repository"
}
]
This (correctly) causes Dependency track to reject the SBOM import with:
{
"status": 400,
"title": "The uploaded BOM is invalid",
"detail": "Schema validation failed",
"errors": [
"$.components[2].externalReferences[0].url: does not match the iri-reference pattern must be a valid RFC 3987 IRI-reference",
"$.components[2].externalReferences[0].url: does not match the iri-reference pattern must be a valid RFC 3987 IRI-reference",
"$.components[2].externalReferences[0].url: does not match the regex pattern ^urn:cdx:[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}/[1-9][0-9]*$",
]
}
The CycloneDX spec indeed requires a URI:
The URI (URL or URN) to the external reference. External references are
URIs and therefore can accept any URL scheme including https (RFC-7230),
mailto (RFC-2368), tel (RFC-3966), and dns (RFC-4501)
https://cyclonedx.org/docs/1.6/json/#metadata_tools_oneOf_i0_components_items_externalReferences_items_url
The user@host:project/repo.git is a git-specific shorthand for a git-over-ssh URL. From man git-clone:
Git supports ssh, git, http, and https protocols (in addition, ftp and ftps
can be used for fetching, but this is inefficient and deprecated; do not use
them).
The native transport (i.e. git:// URL) does no authentication and should
be used with caution on unsecured networks.
The following syntaxes may be used with them:
• ssh://[user@]host.xz[:port]/path/to/repo.git/
• git://host.xz[:port]/path/to/repo.git/
• http[s]://host.xz[:port]/path/to/repo.git/
• ftp[s]://host.xz[:port]/path/to/repo.git/
An alternative scp-like syntax may also be used with the ssh protocol:
• [user@]host.xz:path/to/repo.git/
So convert the scp-like syntax to ssh:// URLs in parse_uris() for spec
compliance.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-By: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ebcfdb8b0a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
There are a number of runtime tests that checks that a command fails as
expected, so add an assertRunNotOk() similar to the existing assertRunOk()
to handle that instead of open coding it everywhere.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 03783de150)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
* Explicitly set shell type. Shellcheck doesn't know OpenRC, but the
script as such is POSIX shell.
* Override warnings not applicable in context.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit 3e2cc4e46f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
With the action function as the last command in the script its return
code automatically becomes that of the script, and without explicit
exit shellcheck does not complain about unused functions.
Also wait for the process to stop in "stop", and simplify restart.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit b4884a2937)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
If sending the stop signal failed for whatever reason, waiting for an
existing PID file to disappear is likely to block indefinitely.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Tested-by: Andreas Ziegler <br025@umbiko.net>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit b2d84525f9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The exit status of the last command automatically becomes the exit
status of the script. And if there is no explicit exit shellcheck
accepts unused functions (here: start/stop/... called via variable).
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Tested-by: Andreas Ziegler <br025@umbiko.net>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit 118ffb20b5)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2026-9669:
bz2.BZ2Decompressor objects could be reused after a decompression
error. If an application caught the resulting OSError and retried with
the same decompressor, crafted input could cause the decompressor to
resume from an invalid internal state and perform out-of-bounds writes
to a stack buffer. This could crash the process when processing
untrusted data.
https://www.cve.org/CVERecord?id=CVE-2026-9669
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit 5cd9188c3e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Upstream commit
a00a3cce3c
added the code of gli & glm in-tree and removed the usage as external
packages.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 8bcb156d33)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Our docker image was finally updated to Debian 12 and now provide Qemu
7.2.15 [1]. We can safely revert this workaround for older Qemu version.
[1] e5bbe020ca
This reverts commit 37e23e0dd7.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 4834f18c69)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This patches CVE-2026-40393 by backporting the two patches from the
Merge Request listed in the CVE[1]. They don't apply cleanly when
backported. While the conflict is mechanically easy to resolve (simply
a few include directives missing in git context), it's not enough as
src/util/stack_array.h is not present on 24.0.9. Hence the three
additional patches before the patches listed in the Merge Request so
that file actually exists. Technically, only patch 8 is required but
patch 7 make for a conflict-free application of patch 8, itself only
conflict-free if patch 6 is applied.
[1] https://www.cve.org/CVERecord?id=CVE-2026-40393
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The NVD database schema has the following entry
```
{
"vulnerable": true,
"criteria": "cpe:2.3:a:ntp:ntp:*:*:*:*:*:*:*:*",
"versionEndIncluding": "4.2.8",
},
```
Which make every patch revision of the package ntp match to the
CVE-2015-7977.
This commit ignore this entry.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 00e4a03348)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See the release notes:
- https://docs.djangoproject.com/en/5.2/releases/5.2.14/
- https://docs.djangoproject.com/en/5.2/releases/5.2.15/
This fixes the following vulnerabilities:
- CVE-2026-5766 : Potential denial-of-service vulnerability in ASGI requests
via file upload limit bypass
- CVE-2026-35192: Session fixation via public cached pages and
SESSION_SAVE_EVERY_REQUEST
- CVE-2026-6907 : Potential exposure of private data due to incorrect handling
of Vary: * in UpdateCacheMiddleware
- CVE-2026-6873 : Signed cookie salt namespace collision
- CVE-2026-7666 : Potential unencrypted email transmission via STARTTLS
in the SMTP backend
- CVE-2026-8404 : Potential exposure of private data via case-sensitive
Cache-Control directives
- CVE-2026-35193: Potential exposure of private data via missing
Vary: Authorization
- CVE-2026-48587: Potential exposure of private data via whitespace padding
in Vary header
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit 00b9069f46)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/openssl/openssl/releases/tag/openssl-3.5.7
This release incorporates the following bug fixes and mitigations:
Fixed heap use-after-free in PKCS7_verify().
(CVE-2026-45447)
Fixed CMS AuthEnvelopedData processing may accept forged messages.
(CVE-2026-34182)
Fixed unbounded memory growth in the QUIC PATH_CHALLENGE handler.
(CVE-2026-34183)
Fixed NULL pointer dereference in QUIC server initial packet handling.
(CVE-2026-42764)
Fixed AES-OCB IV ignored on EVP_Cipher() path.
(CVE-2026-45445)
Fixed possible heap buffer overflow in ASN.1 multibyte string conversion.
(CVE-2026-7383)
Fixed out-of-bounds read in CMS password-based decryption.
(CVE-2026-9076)
Fixed heap buffer over-read in ASN.1 content parsing.
(CVE-2026-34180)
Fixed PKCS#12 files with PBMAC1 are accepted with short HMAC keys.
(CVE-2026-34181)
Fixed possible NULL dereference in password-dased CMS decryption.
(CVE-2026-42766)
Fixed NULL pointer dereference in CRMF EncryptedValue decryption.
(CVE-2026-42767)
Fixed multi-RecipientInfo Bleichenbacher Oracle in CMS_decrypt()
and PKCS7_decrypt().
(CVE-2026-42768)
Fixed trust anchor substitution via cert/issuer typo in CMP
rootCaKeyUpdate.
(CVE-2026-42769)
Fixed FFC-DH peer validation uses attacker-supplied q.
(CVE-2026-42770)
Fixed incorrect tag processing for empty messages in AES-GCM-SIV
and AES-SIV modes.
(CVE-2026-45446)
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Waldemar Brodkorb <wbx@openadk.org>
(cherry picked from commit b0ea6e310f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issues:
*) SECURITY: CVE-2026-49975: mod_http2 denial of service
(cve.mitre.org)
Memory Allocation with Excessive Size Value vulnerability in
Apache HTTP Server's mod_http leads to denial of service via
malicious HTTP requests.
This issue affects Apache HTTP Server: from 2.4.17 through
2.4.67.
Credits: Quang Luong of Calif.IO in collaboration with OpenAI
Codex
*) SECURITY: CVE-2026-48913: mod_http2 memory corruption when file
handles exhausted (cve.mitre.org)
Use After Free vulnerability in Apache HTTP Server module
mod_http2 when file handles are already exhausted.
This issue affects Apache HTTP Server: from 2.4.55 through
2.4.67.
Credits: Sam Lovejoy, IBM X-Force Offensive Research (XOR)
*) SECURITY: CVE-2026-44631: Heap Underflow in `ap_regname` via
Signed Char Overflow (cve.mitre.org)
Buffer Underwrite vulnerability in Apache HTTP Server on crafted
regular expressions in the configuration.
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes
the issue.
Credits: Zhenpeng (Leo) Lin at depthfirst
*) SECURITY: CVE-2026-44186: Loop in `proxy_ftp_handler` in
mod_proxy_ftp (cve.mitre.org)
Loop with Unreachable Exit Condition ('Infinite Loop')
vulnerability in the mod_proxy_ftp module in Apache HTTP Server
with an attacker controlled backend FTP server.
This issue affects undefined: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes
the issue.
Credits: Zhenpeng (Leo) Lin at depthfirst
*) SECURITY: CVE-2026-44185: Stack Buffer Over-Read in mod_ssl OCSP
`send_request` (cve.mitre.org)
Buffer Over-read vulnerability in Apache HTTP Server via
outbound OCSP requests to an attacker controlled OCSP server
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes
the issue.
Credits: Zhenpeng (Leo) Lin at depthfirst
*) SECURITY: CVE-2026-44119: escalation of privilege through
expressions in .htaccess in multiple modules (cve.mitre.org)
Improper Privilege Management vulnerability in Apache HTTP
Server 2.4.67 and earlier allows local .htaccess authors to read
files with the privileges of the httpd user.
This issue affects Apache HTTP Server: from through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes
the issue.
Credits: Lucian Nitescu
*) SECURITY: CVE-2026-43951: OOB Read in `merge_response_headers`
can cause crash (cve.mitre.org)
Out-of-bounds Read vulnerability in Apache HTTP Server with
mod_headers and mod_mime and multiple response languages.
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Credits: Zhenpeng (Leo) Lin at depthfirst
*) SECURITY: CVE-2026-42536: mod_xml2enc heap overflow
(cve.mitre.org)
Heap-based Buffer Overflow vulnerability in Apache HTTP Server
with mod_xml2enc, xml2StartParse, and untrusted content
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes
the issue.
Credits: Zhenpeng (Leo) Lin at depthfirst
*) SECURITY: CVE-2026-42535: mod_dav_fs protected directory access
(cve.mitre.org)
A path handling issue in mod_dav_fs in Apache 2.4.67 and
earlier allows a WebDAV content author to directly manipulate
trusted DAV property databases, potentially causing child
process crashes.
Users are recommended to upgrade to version 2.4.68, which fixes
this issue.
Credits: Zhenpeng (Leo) Lin at depthfirst
*) SECURITY: CVE-2026-34356: ProxyPassReverseCookieMap buffer
overflow (cve.mitre.org)
Heap-based Buffer Overflow vulnerability in Apache HTTP Server
with malicious backend servers and ProxyPassReverseCookie*
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes
the issue.
Credits: Arkadi Vainbrand
*) SECURITY: CVE-2026-34355: mod_proxy_html buffer overflow
(cve.mitre.org)
A buffer overflow in mod_proxy_html in Apache HTTP Server 2.4.67
and earlier allows an attack by an untrusted backend.
Users are recommended to upgrade to version 2.4.68, which fixes
this issue.
Credits: Elhanan Haenel
*) SECURITY: CVE-2026-29170: mod_proxy_ftp XSS (cve.mitre.org)
A cross-site scripting vulnerability exists in mod_proxy_ftp's
HTML directory list generation in Apache HTTP Server 2.4.67 and
earlier when listing FTP directory contents either via forward
or reverse proxy configuration.
Users are recommended to upgrade to version 2.4.68, which fixes
this issue.
Credits: Pavel Kohout, Aisle Research, Aisle.com
*) SECURITY: CVE-2026-29167: mod_ldap per-dir use-after-free
(cve.mitre.org)
Use After Free vulnerability in Apache HTTP Server with mod_ldap
in per-directory configuration
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes
the issue.
Credits: Pavel Kohout, Aisle Research, Aisle.com
For more details, see the CHANGES file:
https://downloads.apache.org/httpd/CHANGES_2.4.68
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 07a690f00b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See the release notes:
https://github.com/redis/redis/blob/7.2.14/00-RELEASENOTES
This fixes the following vulnerabilites:
- CVE-2026-23479:
Redis is an in-memory data structure store. In redis-server from 7.2.0
until 8.6.3, the unblock client flow does not handle an error return
from `processCommandAndResetClient` when re-executing a blocked
command. If a blocked client is evicted during this flow, an
authenticated attacker can trigger a use-after-free that may lead to
remote code execution. This has been patched in version 8.6.3.
https://www.cve.org/CVERecord?id=CVE-2026-23479
- CVE-2026-23631:
Redis is an in-memory data structure store. In all versions of redis-
server with Lua scripting, an authenticated attacker can exploit the
master-replica synchronization mechanism to trigger a use-after-free
on replicas where replica-read-only is disabled or can be disabled,
which may lead to remote code execution. A workaround is to prevent
users from executing Lua scripts or avoid using replicas where
replica-read-only is disabled. This is patched in version 8.6.3.
https://www.cve.org/CVERecord?id=CVE-2026-23631
- CVE-2026-25243:
Redis is an in-memory data structure store. In versions of redis-
server up to 8.6.3, the RESTORE command does not properly validate
serialized values. An authenticated attacker with permission to
execute RESTORE can supply a crafted serialized payload that triggers
invalid memory access and may lead to remote code execution. A
workaround is to restrict access to the RESTORE command with ACL
rules. This is patched in version 8.6.3.
https://www.cve.org/CVERecord?id=CVE-2026-25243
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit be7b7821c6)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since the runc security bump to version 1.3.5 [1], the TestOci fail due
to missing user namespace support in the kernel:
proc/self/setgroups: no such file or directory
The test was working well with runc 1.3.0. The regression is caused by
this commit [2] from the 1.3.3 security release.
The regression is fixed by a refactoring from the 1.4.1 release [3].
Backport this commit on top of runc 1.3.5 (fixing some conflicts).
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/14696525946 (TestOci)
[1] e013e2df84
[2] 7762edc82c
[3] 323a54ef0d
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 94b2cc09e2)
[thomas: rebase patch]
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
When using a specific git repo and version for at91bootstrap3,
BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES defaults to "LICENSES/MIT.txt".
However the git version we use (namely v3.10.3) does not provide this
file. Actually, it does not provide a license file at all. This causes
‘make legal-info’ to fail with:
>>> at91bootstrap3 v3.10.3 Collecting legal info
sha256sum: /builds/buildroot.org/buildroot/output/build/at91bootstrap3-v3.10.3/LICENSES/MIT.txt: No such file or directory
ERROR: while checking hashes from boot/at91bootstrap3/at91bootstrap3.hash
ERROR: LICENSES/MIT.txt has wrong sha256 hash:
ERROR: expected: 5a3809b1c2ba13b7242572322951311c584419f1f8516f665d6c06f0668d78de
ERROR: got :
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
make[1]: *** [boot/at91bootstrap3/at91bootstrap3.mk:112: at91bootstrap3-legal-info] Error 1
Let's be explicit that there is no license file to check.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/14728913821 (at91sam9x5ek_mmc_dev_defconfig)
https://gitlab.com/buildroot.org/buildroot/-/jobs/14728913820 (at91sam9x5ek_mmc_defconfig)
https://gitlab.com/buildroot.org/buildroot/-/jobs/14728913819 (at91sam9x5ek_dev_defconfig)
https://gitlab.com/buildroot.org/buildroot/-/jobs/14728913818 (at91sam9x5ek_defconfig)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 1339bba787)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issues:
CVE-2026-23679: libusb before version 1.0.30 contains a NULL pointer
dereference vulnerability that allows attackers to crash applications by
supplying a malformed USB configuration descriptor where an interface claims
bNumEndpoints greater than zero but is followed by a class-specific
descriptor whose bLength exceeds the remaining buffer size, causing
parse_interface() to return early without allocating the endpoint array.
Attackers can exploit this flaw through libusb_get_active_config_descriptor
or libusb_get_config_descriptor by providing crafted descriptors via
virtualized USB passthrough, file-based descriptor parsing, or network
sources, causing any application iterating over endpoints to dereference a
NULL endpoint pointer and crash.
https://nvd.nist.gov/vuln/detail/CVE-2026-23679
CVE-2026-47104: libusb before version 1.0.30 contains a one-byte
out-of-bounds read vulnerability in parse_iad_array() in descriptor.c that
allows attackers to trigger a denial of service by supplying a malformed USB
descriptor whose bLength equals size minus one, causing the bounds check to
use the original buffer size instead of the remaining size. Attackers in
virtualized environments with USB passthrough can supply crafted descriptors
through libusb_get_active_interface_association_descriptors or
libusb_get_interface_association_descriptors to read one byte past the end
of the malloc allocation, resulting in a denial of service.
https://nvd.nist.gov/vuln/detail/CVE-2026-47104
For more details, see the announcement:
https://sourceforge.net/p/libusb/mailman/message/59335553/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 907ebab6d9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/strukturag/libde265/releases/tag/v1.1.1
Fixes the following security problems:
CVE TBD (GHSA-ccfw-29x7-rrx3)
- Pixel accessor signed integer overflow causes heap OOB read/write
CVE TBD (GHSA-j2qq-x2xq-g9wr)
- SAO sequential filter heap buffer overflow via signed integer overflow
This version bump includes upstream commit
9ded37bda4
which uses constexpr() and causes a build error caught by the Gitlab
pipelines with the gcc-6-based bootlin-aarch64-glibc-old defconfig:
/builds/bkuhls/buildroot/br-test-pkg/bootlin-aarch64-glibc-old/build/libde265-1.1.1/libde265/deblock.cc:594:14:
error: expected ‘(’ before ‘constexpr’
if constexpr (sizeof(pixel_t)==1) {
Therefore we need to raise the minimum gcc version according to
https://gcc.gnu.org/projects/cxx-status.html#cxx17 to gcc 7.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 35b57a0787)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2026-8328:
The ftpcp() function in Lib/ftplib.py was not updated when
CVE-2021-4189 was fixed. While makepasv() was patched to replace
server-supplied PASV host addresses with the actual peer address
(getpeername()[0]), ftpcp() still calls parse227() directly and passes
the raw attacker-controllable IP address and port to
target.sendport(). This patch is related to CVE-2021-4189.
https://www.cve.org/CVERecord?id=CVE-2026-8328
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2026-7774:
tarfile.data_filter could be bypassed using crafted link entries,
including symlinks with empty or directory-like names, to redirect
later archive members outside the intended extraction directory. This
allowed a malicious tar archive to cause tarfile.extractall() to write
files outside the destination directory, subject to the permissions of
the extracting process.
https://www.cve.org/CVERecord?id=CVE-2026-7774
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2026-3276:
unicodedata.normalize() can take excessive CPU time when processing
specially crafted Unicode input containing long runs of combining
characters with alternating Canonical Combining Class values. This
affects all normalization forms.
https://www.cve.org/CVERecord?id=CVE-2026-3276
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Patch 0013 was removed in Buildroot commit
fdfbad13ca (python3 security bump to v3.12.12),
as it has been integrated in Python3 upstream.
However, said Buildroot commit did not remove the corresponding IGNORE_CVES,
so remove it now.
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This commit fixes the following vulnerability:
- CVE-2026-7598:
A security vulnerability has been detected in libssh2 up to 1.11.1.
The impacted element is the function userauth_password of the file
src/userauth.c. Such manipulation of the argument
username_len/password_len leads to integer overflow. The attack may be
launched remotely. The name of the patch is
256d04b60d80bf1190e96b0ad1e91b2174d744b1. A patch should be applied to
remediate this issue.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-7598
- 256d04b60d
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 061d6b121b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
defconfigs are very unlikely to successfully build on a small runner
because they build a kernel (and often a toolchain). They're also likely
to benefit a lot from the additional parallelism on larger runners.
For now, always build them on large runners. There may be some for which
even the large runners don't have sufficient disk space or memory, but
we'll solve that when it happens.
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit f93dbfca13)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since the ARM AArch64 toolchain toolchain bump [1], the TestPppd fail
at runtime since ttyppp0 and ttyppp1 interfaces were not created
properly:
pppd[87]: pppd 2.5.2 started by root, uid 0
pppd[87]: Baud rate for /dev/ttyppp1 is 0; need explicit baud rate
The new toolchain uses glibc 2.42 that include a rework in termios
"implement arbitrary and split speeds in termios" to support BOTHER
[2]. This rework seems to conflict with pppd workaround [3] introduced
when BOTHER was not supported in Glibc.
Fix this by setting the baudrate on pppd command line (we already set
this baudrate on socat command line).
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/14607335920 (TestPppd)
[1] 8d413d6179
[2] https://sourceware.org/git/?p=glibc.git;a=commit;h=5cf101a85aae0d703cdd8ed7b25fe288e41fdacb
[3] d65f6713c8
Fix-suggested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 50d772b66b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
We have our own GitLab-CI runner, but with only one we can't run many
jobs in parallel so it takes a very long time before all the tests have
completed. In addition, if that runner goes down, we have nothing at
all.
GitLab offers the following machine types for hosted runners on Linux
x86-64 [1]. The default is the "small" runner. Using a larger runner
increases the "Cost factor" [2].
For opensource projects, the Cost factor is reduced to 0.5 (1 minute per
2 minutes of job time) whatever the runner type.
Runner Tag vCPUs Memory Storage Cost factor (OSS)
saas-linux-small-amd64 (default) 2 8 GB 30 GB 1 (0.5)
saas-linux-medium-amd64 4 16 GB 50 GB 2 (0.5)
saas-linux-large-amd64 (Premium and Ultimate only) 8 32 GB 100 GB 3 (0.5)
saas-linux-xlarge-amd64 (Premium and Ultimate only) 16 64 GB 200 GB 6 (0.5)
saas-linux-2xlarge-amd64 (Premium and Ultimate only) 32 128 GB 200 GB 12 (0.5)
Compute minutes consumed by a job is calculated by:
Job duration / 60 * Cost factor
(Job duration: The time, in seconds, that a job took to run, not
including time spent in the created or pending statuses.)
Thanks to the GitLab OSS program [3], Buildroot benefits from a free
Ultimate subscription and can use GitLab shared runners tagged with
saas-linux-{large, xlarge, 2xlarge}-amd64. In addition, we receive
50,000 free runner minutes per month.
In order to use one of those tags in Buildroot GitLab-CI jobs, we have
to classify all tests by resource requirement, to make sure the job
doesn't fail because it times out or has insufficient memory or disk
space. While we usually shouldn't use the largest runner for
everything, we can use larger runner without cost penalty thanks to
the cost factor reduced to 0.5 for opensource projects. This will
reduce the CI minutes consumed by a CPU intensive job.
First we introduce some new templates used to add the corresponding
runner tag to a runtime test job (reusing the GitLab terminology).
.runner-{small,medium,large,xlarge,2xlarge}
Most of our tests are fast (checkpackage, test_external_bootlin...), so
saas-linux-small-amd64 runner tag is enough. Default to this tag if
nothing else is specified.
Add a comment next to the test class to provide the runner tag.
This runner tag is retrieved when generating the
generated-gitlab-ci.yml file used to create the child pipeline where
the runtime test jobs are executed.
We use the list of runtime tests returned by node2:
"tests.boot.test_edk2.TestEdk2.test_run"
We convert each element of this list to get the path to the test source
file and the name of the test:
"support/testing/tests/boot/test_edk2.py"
TestEdk2
With that, we can grep into the test source file to retrieve the runner
tag placed one line above the test class:
# GitLab-runner: large
class TestEdk2(infra.basetest.BRTest):
Once the runner tag is retrieved, it's used to use the corresponding
runner template to the runtime test job:
tests.boot.test_edk2.TestEdk2.test_run: { extends: [ .runtime_test_base, .runner-large ]}
GitLab runners hosted by the Buildroot project should be able to run
any jobs, so they should be tagged with Gitlab runner tags
(saas-linux-{small,medium,large,xlarge,2xlarge}-amd64).
A specific runner tag "buildroot-runner" can be used to allow running
a job only on such runners.
If a test can't be executed by any shared GitLab-CI runners, we have
to use a runner owned by the Buildroot project. In this case we have
to use a specific template ".runner-buildroot-runner-only" in order to
add the specific runner tag "buildroot-runner" to the job running the
test. There is no such runtime test at the moment.
The proposed classification is based on a previous pipeline analysis
[5]:
- Tests lasting more than 3 hours will use 2xlarge runners.
- Tests lasting more than 2 hours will use xlarge runners.
- Tests lasting more than 1 hours will use large runners.
- Tests building a kernel or a toolchain will use medium runners.
- All other tests will use small runners when possible.
CI minute cost estimate:
tests.package.test_clang.TestClangCompilerRT.test_run lasts 4h25 on the
Buildroot runner. If we this duration for 2xlarge runners, the CI
minute consumed would be:
(15900 / 60) * 0.5 = 133
With 6 jobs using a 2xlarge runners we used ~795 CI minutes.
tests.package.test_kmscube.TestKmsCube.test_run list 2h04 on the
Buildroot runner. If we this duration for xlarge runners, the CI
minute consumed would be:
(7440 / 60) * 0.5 = 62
With 4 jobs using a xlarge runners we used ~248 CI minutes.
tests.package.test_weston.TestWeston.test_run last 1h15 on th
Buildroot runner. If we this duration for large runners, the CI
minute consumed would be:
(4500 / 60) * 0.5 = 37.5
With 28 jobs using a large runners we used ~1050 CI minutes.
tests.package.test_gstreamer1.TestGstreamer1.test_run last 46min on the
Buildroot runner. If we this duration for large runners, the CI
minute consumed would be:
(2760 / 60) * 0.5 = 23
With 31 jobs using a medium runners we used ~713 CI minutes.
tests.package.test_python.TestPython3Py.test_run last 13min on the
Buildroot runner. If we this duration for large runners, the CI
minute consumed would be:
(780 / 60) * 0.5 = 6.5
With 691 jobs using a medium runners we used ~4491 CI minutes.
In total, one pipeline for the runtime tests cost ~7297 CI minutes.
After a first try [6], we are actually using 8000 CI minutes per
pipeline.
We run such pipeline once a week (on Monday), one for each Buildroot
releases every 3 month, one for each stable and LTS release per month,
and one for each release candidate (3).
Worst case (release month):
(4 weeks + 1 release + 1 stable + 1 LTS + 3 release candidate) * 8000 CI
minutes: 80000 CI minutes / 50000.
So we would spend the minutes very quickly in the worst case scenario.
We have to keep one pipeline under 5000 CI minutes.
[1] https://docs.gitlab.com/ci/runners/hosted_runners/linux/#machine-types-available-for-linux---x86-64
[2] https://docs.gitlab.com/ci/pipelines/compute_minutes/#cost-factorshttps://docs.gitlab.com/ci/pipelines/compute_minutes/#compute-usage-calculationhttps://docs.gitlab.com/ci/pipelines/compute_minutes/#cost-factors-of-hosted-runners-for-gitlabcom
[3] https://gitlab.com/buildroot.org/gitlab-oss
[4] https://docs.gitlab.com/ci/runners/hosted_runners/#gitlabcom-hosted-runner-workflow
[5] https://gitlab.com/buildroot.org/buildroot/-/pipelines/2416603721
[6] https://gitlab.com/buildroot.org/buildroot/-/pipelines/2562421098
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Arnout:
- simplify parsing of test_file and test_name;
- match the entire test_name instead of substring;
- assume "small" by default;
- remove the "small" tags;
- use "gitlab-runner" instead of "Gitlab-runner".
]
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit c9df1b64b2)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Currently the weekly pipelines are triggered from a cron job on the
Buildroot server, so generate-gitlab-ci-yml filters on the "trigger"
source. However, we'd like to schedule it on gitlab itself, which makes
managing it easier.
We could filter on "schedule" in addition to "trigger", but there's not
really a reason to. We can simply rely on the BR_SCHEDULE_JOBS variable
- if it is set, we use its information.
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit c0922004d8)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since this script is often used to bump kernel versions in multiple
Buildroot branches, it makes sense to simply commit changes directly
rather than letting the developer do it by hand.
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit fab50ed3b1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The 'show-info' output always the location relative to the Buildroot
root directory.
When running 'generate-cyclonedx' outside of the Buildroot root
directory the hash file locations are not correct. Only using the
'hash_file' variable coming from 'show-info' doesn't guarantee the
script to succeed.
Use the 'brpath' variable to correctly reference the absolute path.
Fixes: 1791b79422 utils/generate-cyclonedx: add hashes from .hash files to externalReferences
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 2df4f1d573)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes:
https://autobuild.buildroot.net/results/9f0f50858b2f41c306f172bf011a34d2c0ad65dc/
>>> zsh 5.9 Downloading
wget -nd -t 3 --no-check-certificate -O '/home/autobuild/autobuild/instance-42/output-1/build/.zsh-5.9.tar.xz.FpXHXy/output' 'http://www.zsh.org/pub/zsh-5.9.tar.xz'
URL transformed to HTTPS due to an HSTS policy
--2026-06-01 01:46:35-- https://www.zsh.org/pub/zsh-5.9.tar.xz
Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt'
Resolving www.zsh.org (www.zsh.org)... 94.142.241.90
Connecting to www.zsh.org (www.zsh.org)|94.142.241.90|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2026-06-01 01:46:36 ERROR 404: Not Found.
zsh-5.9.1 was released on 2026-05-31 and 5.9.0 release tarball moved under
old/, so update ZSH_SITE to match.
https://zsh.sourceforge.io/News/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 92cdec5a54)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since Buildroot commit 0e3ddc9dc8,
linux hash files are split between pre- and post-6.17.
With buildroot commit da01b7271a the
script was updated for the new situation but still needs to update the
version-numbered links to the directories with the correct hash files.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit bd633fe5b4)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Our CI uses "/builds/buildroot.org/buildroot" as build directory.
Unlikely the xfsprogs build system misbehave when a directory in
the path contain ".o".
While generating .ltdep, the sed command used to convert object file
(.o) to libtool object(.lo) replace buildroot.org by buildroot.lorg.
.ltdep: $(CFILES) $(HFILES)
$(Q)$(MAKEDEP) $(CFILES) | $(SED) -e 's,^\([^:]*\)\.o,\1.lo,' > .ltdep
Building libfrog
[CC] gen_crc32table
[GENERATE] crc32table.h
gmake[4]: *** No rule to make target '/builds/buildroot.lorg/buildroot/test-output/TestXfs/host/include/urcu.h', needed by 'avl64.lo'. Stop.
Update the sed command to avoid this effect.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/14607335648
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 0a9bc387b6)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commit cdd1c5ca55 bumped the
package from version 22.12.0 to 25.10.0 but forgot to change zlib into
a mandatory dependency. This is necessary due to upstream commit
7d87c7d2c6
since version 23.07.0.
Fixes:
https://autobuild.buildroot.net/results/85f/85fb6c2945101b8d4ee86dbc32700293e7b35a86/
CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:290 (message):
Could NOT find ZLIB (missing: ZLIB_LIBRARY ZLIB_INCLUDE_DIR)
Call Stack (most recent call first):
/usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:654 (_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake/Modules/FindZLIB.cmake:242 (find_package_handle_standard_args)
CMakeLists.txt:309 (find_package)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7a9486d7d6)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This is the file the original commit d889838098 ("package/pkg-generic.mk:
Remove Info documents dir entry") wanted to delete.
However, it only works for host packages. Target packages are (usually)
installed with prefix /usr, so the info dir is /usr/share/info. Simply
remove both of them, even if one of them only exists for host packages
and the other only for target packages.
Signed-off-by: John Ernberg <j@j-ernberg.se>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit e5a723f35d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Linux v7.0 introduced a few more errno values that are aliases of other
errnos. This causes the following error:
In file included from ../src/basic/errno-list.c:13:
src/basic/errno-to-name.h:71:23: error: initialized field overwritten [-Werror=override-init]
71 | [EFSBADCRC] = "EFSBADCRC",
| ^~~~~~~~~~~
src/basic/errno-to-name.h:71:23: note: (near initialization for ‘errno_names[74]’)
src/basic/errno-to-name.h:114:26: error: initialized field overwritten [-Werror=override-init]
114 | [EFSCORRUPTED] = "EFSCORRUPTED",
| ^~~~~~~~~~~~~~
src/basic/errno-to-name.h:114:26: note: (near initialization for ‘errno_names[117]’)
cc1: some warnings being treated as errors
For target systemd this is not an issue as we don't support v7.0,
however it also occurs for host-systemd when building on a system with
kernel v7.0+.
Backport an upstream patch that excludes these two errnos from the
errno-to-name array. The upstream patch was applied to v261 and
backported to v258.5, but it was not backported to v256-stable (which is
EOL).
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Add local patche committed upstream to fix build failure due to missing
limits.h include.
This error happens when compiling swupdate with LuaJit. This can be
reproduced with the following configuration:
cat >configs/samba-bump_defconfig <<EOF
BR2_arm=y
BR2_cortex_a7=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_PACKAGE_SWUPDATE=y
BR2_PACKAGE_LUAJIT=y
EOF
make olddefconfig
make swupdate
Fixes:
https://autobuild.buildroot.org/results/6ed019be7ff0144679f150dbd67cec4dd31fdb15/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[thomas: add configuration]
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Thanks to the Debian community to providing the patches. This commit
fixes the following vulnerability.
- CVE-2025-61984:
ssh in OpenSSH before 10.1 allows control characters in usernames that
originate from certain possibly untrusted sources, potentially leading
to code execution when a ProxyCommand is used. The untrusted sources
are the command line and %-sequence expansion of a configuration file.
(A configuration file that provides a complete literal username is not
categorized as an untrusted source.)
https://www.cve.org/CVERecord?id=CVE-2025-61984
- CVE-2025-61985:
ssh in OpenSSH before 10.1 allows the '\0' character in an ssh:// URI,
potentially leading to code execution when a ProxyCommand is used.
https://www.cve.org/CVERecord?id=CVE-2025-61985
- CVE-2026-35385:
In OpenSSH before 10.3, a file downloaded by scp may be installed
setuid or setgid, an outcome contrary to some users' expectations, if
the download is performed as root with -O (legacy scp protocol) and
without -p (preserve mode).
https://www.cve.org/CVERecord?id=CVE-2026-35385
- CVE-2026-35386:
In OpenSSH before 10.3, command execution can occur via shell
metacharacters in a username within a command line. This requires a
scenario where the username on the command line is untrusted, and also
requires a non-default configurations of % in ssh_config.
https://www.cve.org/CVERecord?id=CVE-2026-35386
- CVE-2026-35387:
OpenSSH before 10.3 can use unintended ECDSA algorithms. Listing of
any ECDSA algorithm in PubkeyAcceptedAlgorithms or
HostbasedAcceptedAlgorithms is misinterpreted to mean all ECDSA
algorithms.
https://www.cve.org/CVERecord?id=CVE-2026-35387
- CVE-2026-35388:
OpenSSH before 10.3 omits connection multiplexing confirmation for
proxy-mode multiplexing sessions.
https://www.cve.org/CVERecord?id=CVE-2026-35388
- CVE-2026-35414:
OpenSSH before 10.3 mishandles the authorized_keys principals option
in uncommon scenarios involving a principals list in conjunction with
a Certificate Authority that makes certain use of comma characters.
https://www.cve.org/CVERecord?id=CVE-2026-35414
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit [1] introduced a patch to fix CVE-2025-32728.
Since [2] the security patches neeed to reference the vulnerability with
the `CVE: ` trailer in the patch header.
This patch is no longer present on master branch with openssh bump [3]
but hasn't been cherry picked to 2025.02.x branch.
The 2025.02.x version still had this patch present and thus need to add
the trailer to it.
[1] 211e822d43 package/openssh: apply security patch for CVE-2025-32728 (sshd)
[2] 1167d0ff3d docs/manual: mention CVE trailer
[3] a127b7e999 package/openssh: bump to version 10.0p1
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The previous site went offline, the last entry dates back to April 2026:
https://web.archive.org/web/20260401000000*/http://www.auto.tuwien.ac.at/~mkoegler/pth/
Update _SITE to the bcusdk project which depends on libpthsem and stores
the original tarball. Update project URL to github mirror provided by the
linknx project which also depends on libpthsem.
Fixes download error:
ERROR: while checking hashes from package/libpthsem/libpthsem.hash
ERROR: pthsem_2.0.8.tar.gz has wrong sha256 hash:
ERROR: expected: 4024cafdd5d4bce2b1778a6be5491222c3f6e7ef1e43971264c451c0012c5c01
ERROR: got : 01d9027268f27aab3ca5c6c649a7f7a444db5bc889e496d80c8704e4e120346e
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Fixes:
https://autobuild.buildroot.net/results/0d9/0d9e957540d15302ac55bc5a2207db0c45279b37/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ec687c3b5c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
All Qt6 packages install their own SPDX SBOM in
$(TARGET_DIR)/usr/lib/qt6/sbom/. In the context of Buildroot having
such SBOMs on the target is not useful, and they take up some space,
so get rid of them.
We use a TARGET_FINALIZE_HOOKS (and not a POST_INSTALL_TARGET_HOOKS)
because it's not just qt6base that installs SBOMs, but all qt6
modules, so we want the cleanup to happen after they all got
installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 160ef0b27a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Using '$(Q)rm -rf' is not the typical thing we do in Buildroot, we
more commonly use '$(RM) -rf'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 45789c73b1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
iconv types are defined differently in glibc (as pointers) and uclibc
(as integers). With changes in GCC14, -Wint-conversion has now become
an error, which shed some light on the issue.
The actual fix for that problem is released in uclibc 1.0.58 [1].
However, because these type definitions are in toolchain headers,
this means that the toolchain used to build samba must also include
uclibc>=1.0.58 (either an external toolchain that includes the uclibc fix,
or a Buildroot toolchain after the uclibc fix is merged in Buildroot [2]).
Until then, provide a workaround for samba itself.
No autobuilder failure on this (yet). It can be reproduced with
> ./utils/test-pkg -p samba4 -T bootlin-armv5-uclibc
[1] 328e14e55f
[2] https://lore.kernel.org/buildroot/ahPrm_0gVDGw5B5-@waldemar-brodkorb.de/
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit e136494e91)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issue (in 2.8.10):
CVE-2026-35444: Heap buffer overflow READ via unchecked colormap index in
XCF loader
https://github.com/libsdl-org/SDL_image/security/advisories/GHSA-gq8w-x74c-h6p7
In addition, 2.8.12 includes a number of memory related bugfixes:
Fixed memory overflow with corrupt LBM image
Fixed crash when decoding an invalid XCF image
Fixed out of bound read in GIF decoder
Update hash of license file for change of copyright year with:
281b4ebcb0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7769710087)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit 53bb7eafb2 ("package/arm-trusted-firmware: add
ARM_TRUSTED_FIRMWARE_CPE_ID_*") added logic to set the cpe-id version from
the package version by dropping a v or lts- prefix, but it used subst
instead of patsubst - So it would replace "v" and "lts-" anywhere in the
version and not only in the beginning of it.
Change to patsubst to fix that.
E.G. with the following defconfig:
BR2_aarch64=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="version-with-v-or-lts-in-it"
before:
make printvars VARS=ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION
ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION=ersion-with--or-in-it
after:
make printvars VARS=ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION
ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION=ersion-with-v-or-lts-in-it
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit e60515bbf5)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit c53455ea4f ("package/qt5/qt5webengine-chromium: bump version
after qtwebengine bump") bumped qt5webengine-chromium but forgot to
update the licenses.
The diff of the license is reported by
git diff 0ad2814370799a2161057d92231fe3ee00e2fe98..18c9261dc5b8aa57a0bdd5b62ce6f648cca1ef5e -- chromium/third_party/zlib/LICENSE
as the following:
diff --git a/chromium/third_party/zlib/LICENSE b/chromium/third_party/zlib/LICENSE
index 9f056865b57..8aca25d8c7a 100644
--- a/chromium/third_party/zlib/LICENSE
+++ b/chromium/third_party/zlib/LICENSE
@@ -1,6 +1,6 @@
-version 1.2.11, January 15th, 2017
+version 1.2.12, March 27th, 2022
-Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
+Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
so it doesn't change its actual license, let's simply fix the sha256 to
the new value.
Fixes: c53455ea4f ("package/qt5/qt5webengine-chromium: bump version after qtwebengine bump")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Neither Buildroot's nor the module from qt53d sources compile, so always
disable assimp support.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
If we're adding a dependency to the package, it's for its build system
to use it. Unfortunately, when -feature-system-assimp is not passed, the
assimp module from the sources will be used. Moreover, it doesn't build
currently.
Unfortunately, qt53d still doesn't build with assimp from Buildroot.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
If we don't disable it, the assimp module from the sources will be used
instead of none. Unfortunately, it currently doesn't build so let's
disable it when BR2_PACKAGE_ASSIMP is not set such that one can still
build qt53d.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since last commit, utils/generate-cyclonedx can now be used with
Buildroot host tools, provided the user either externally install the
SPDX schema in the DL_DIR themselves or have
BR2_PACKAGE_HOST_PYTHON3_SSL and BR2_PACKAGE_HOST_CA_CERTIFICATES both
enabled. If the latter is missing, Python will complain with:
Traceback (most recent call last):
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 1321, in do_open
h.request(req.get_method(), req.selector, req.data, headers,
~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
encode_chunked=req.has_header('Transfer-encoding'))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/http/client.py", line 1358, in request
self._send_request(method, url, body, headers, encode_chunked)
~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/http/client.py", line 1404, in _send_request
self.endheaders(body, encode_chunked=encode_chunked)
~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/http/client.py", line 1353, in endheaders
self._send_output(message_body, encode_chunked=encode_chunked)
~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/http/client.py", line 1113, in _send_output
self.send(msg)
~~~~~~~~~^^^^^
File "/buildroot/build/host/lib/python3.14/http/client.py", line 1057, in send
self.connect()
~~~~~~~~~~~~^^
File "/buildroot/build/host/lib/python3.14/http/client.py", line 1499, in connect
self.sock = self._context.wrap_socket(self.sock,
~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^
server_hostname=server_hostname)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/ssl.py", line 455, in wrap_socket
return self.sslsocket_class._create(
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
sock=sock,
^^^^^^^^^^
...<5 lines>...
session=session
^^^^^^^^^^^^^^^
)
^
File "/buildroot/build/host/lib/python3.14/ssl.py", line 1076, in _create
self.do_handshake()
~~~~~~~~~~~~~~~~~^^
File "/buildroot/build/host/lib/python3.14/ssl.py", line 1372, in do_handshake
self._sslobj.do_handshake()
~~~~~~~~~~~~~~~~~~~~~~~~~^^
ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1081)
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/buildroot/utils/generate-cyclonedx", line 53, in <module>
urllib.request.urlretrieve(SPDX_SCHEMA_URL, SPDX_SCHEMA_PATH)
~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 212, in urlretrieve
with contextlib.closing(urlopen(url, data)) as fp:
~~~~~~~^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 187, in urlopen
return opener.open(url, data, timeout)
~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 487, in open
response = self._open(req, data)
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 504, in _open
result = self._call_chain(self.handle_open, protocol, protocol +
'_open', req)
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 464, in _call_chain
result = func(*args)
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 1369, in https_open
return self.do_open(http.client.HTTPSConnection, req,
~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
context=self._context)
^^^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 1324, in do_open
raise URLError(err)
urllib.error.URLError: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1081)>
Provide some hint as to what could be missing from Buildroot host.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 17c9deb115)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
urllib will eventually complain that it does not know what https is:
Traceback (most recent call last):
File "/buildroot/utils/generate-cyclonedx", line 53, in <module>
urllib.request.urlretrieve(SPDX_SCHEMA_URL, SPDX_SCHEMA_PATH)
~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 212, in urlretrieve
with contextlib.closing(urlopen(url, data)) as fp:
~~~~~~~^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 187, in urlopen
return opener.open(url, data, timeout)
~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 487, in open
response = self._open(req, data)
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 509, in _open
return self._call_chain(self.handle_open, 'unknown',
~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
'unknown_open', req)
^^^^^^^^^^^^^^^^^^^^
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 464, in _call_chain
result = func(*args)
File "/buildroot/build/host/lib/python3.14/urllib/request.py", line 1397, in unknown_open
raise URLError('unknown url type: %s' % type)
urllib.error.URLError: <urlopen error unknown url type: https>
It's quite confusing really but what it means is that host Python was
built without ssl support.
This adds an additional check importing _ssl and if the module is not
found, tell the user what to do. This still doesn't make Buildroot's
host Python3 fully usable for utils/generate-cyclonedx as it'll then
fail when trying to validate certificates, this will be handled in the
next few commits.
Note that ssl Python library is always built in CPython, but itself
imports the _ssl module which is the one that may be disabled with
py_cv_module__ssl=n/a (which is what happens when
BR2_PACKAGE_HOST_PYTHON3_SSL is not enabled), hence why _ssl is checked
and not ssl.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 3e2df83809)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot-local patches can only be suffixed by .patch, otherwise they
either need to be downloaded via <PKG>_PATCH or manually applied via
$(APPLY_PATCHES) in a <PKG>_{PRE,POST}_PATCH_HOOKS like in
linux/linux.mk. In the former case, they are then listed in the
show-info output with a full URL (prefixed by '<PKG>_SITE_METHOD+'). In
the latter case, they not listed as patches at the moment, just as
externalReferences.
By removing "support" for those compressed patches, we can avoid the bz2
dependency and can now use Buildroot's host-python3 package without
BR2_PACKAGE_HOST_PYTHON3_BZIP2 to run utils/generate-cyclonedx.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 0b70e16d5a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Some packages do not have a http/https download URL for a source tarball,
but are acquired over a version control system like git. If so, add
externalReferences of type "vcs" for such URLs.
As most git repositories use a https:// transport that may not indicated the
repository type, add a "comment" due to the lack of a better mechanism in
CycloneDX.
While the hashes are calculated over a tarball created locally, it still may
be useful, so add them for "vcs" externalReferences as well.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-By: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit e8c54ffb3d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Finding the hash file for a package is non-trivial, as they can be in a
<version> sub-directory or under GLOBAL_PATCH_DIR. To allow other tools
such as utils/generate-cyclonedx to find hash files, expose this information
from show-info. If a package does not provide a hash file, create an
empty hashes array.
Suggested-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 619d44b23a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit dc4af8bfa9 ("utils/generate-cyclonedx: use direct dependencies")
removes indirect dependencies from any listed component, as required by
CycloneDX. The root component, however, still includes indirect dependencies,
as it just takes the components from the show-info output.
Fix this by collecting all component dependencies, and then filter the root
component dependencies to include direct dependencies only.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-By: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit cc41cc3fcd)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes wayland-related build error:
make[4]: *** No rule to make target '/usr/share/waylandpp/protocols/presentation-time.xml',
needed by 'wayland-extra-protocols.hpp'. Stop.
by adding a configure parameter pointing to STAGING_DIR.
The build error was not recorded by the autobuilders and can be
reproduced by this defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SOFTPIPE=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON3_PY_ONLY=y
BR2_PACKAGE_WAYLAND=y
LibreELEC added this configure parameter seven years ago:
d19ab98bf3
so a backport to LTS branches should be considered.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 1fed1a6c75)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
When running 'make show-info-all' without a '.config', it is possible to
trigger this script without passing a version number.
The 'show-info-all' target is special because it forces the reading of
all packages without requiring a .config, so BR2_HOST_CMAKE_AT_LEAST is
unset and the script is called as:
check-host-cmake.sh cmake cmake3
Without validation, the integer comparisons below would produce errors
like:
check-host-cmake.sh: line 37: [: cmake: integer expected
It's possible to trigger this by adding the following file somewhere in
you path:
cat >/bin/cmake3 <<EOF
echo "cmake version 4.3.3 CMake suite maintained and supported by Kitware (kitware.com/cmake)."
EOF
make show-info-all
The same issue can also occur with pkg-stats.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit e7533662a4)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The maintenance and testing workflow sometimes requires to output a
list of every existing package on Buildroot:
- Generating an SBOM of the whole Buildroot tree, e.g. `for
security.buildroot.org
- List every source for every package, e.g. for sources.buildroot.net
The previous solution relied on `make allyesconfig` but always ran into
conflicts that needed manual resolution. Also some packages would not be
present because they are architecture dependent.
To avoid having to manually modify the 'show-info' command this commit
adds the 'show-info-all' command. It accesses the PACKAGES_ALL variable
with all the packages present in Buildroot independently of the
architecture or any config entries.
It forces the `BR2_HAVE_DOT_CONFIG` variable to be set to force the
reading of the package mk files.
It is also added to noconfig_targets, to avoid the .config influencing
the output of show-info-all.
Note that this is not yet a complete solution - it doesn't take into
account the multiple versions that are possible for some packages like
GCC. Also for e.g. linux or uboot the version is empty and the URL is
invalid.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
[Arnout: refactor with existing show-info]
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 723b321bb0)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Since Buildroot commit 0e3ddc9dc8,
linux hash files are split between pre- and post-6.17.
Since that commit, the script that automatically updates kernel
versions in Buildroot was broken, as it assumed only a single linux
hash file at a static location. Update the script to find all relevant
files, even if a new split occurs in the future.
In addition, this patch carries additional minor changes:
- Fix some minor shellcheck issues found with a newer shellcheck version
than in the container (quoting, test -a -> -e)
- Move from wget to curl, as I had some issue on my home connection
with the former (possibly ipv6 related or something)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit da01b7271a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
uutils install 0.8.0 as used in Ubuntu 26.04 has a bug in the install
applet, breaking a number of packages:
https://github.com/uutils/coreutils/pull/11505https://bugs.launchpad.net/ubuntu/+source/rust-coreutils/+bug/2151454
The fix has been merged upstream but not yet released or packaged in Ubuntu,
so detect and reject the buggy version and explain how to change to the
coreutils version. Once fixed the version output will hopefully change.
For simplicity, only check for the exact 0.8.0 version string. Hopefully
when it is fixed in Ubuntu, they also update the version string. Note
that earlier versions of uutils have the same issue of course, but those
versions were never the default "install" on Ubuntu (or anywhere else).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 64cb69f155)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This reverts commit 6b56e0b4f0.
commit 6b56e0b4f0 ("linux: disable -Werror") said we needed to disable
CONFIG_WERROR in the kernel because it failed to build the esp-hosted
kernel module. This was very much the hammer approach because a) it'd be
better to fix the warnings in the kernel module or b) disable the
kernel's CONFIG_WERROR *only* if esp-hosted is to be built, via the
ESP_HOSTED_LINUX_CONFIG_FIXUPS variable in
package/esp-hosted/esp-hosted.mk.
This is a simple revert without making any change to any kernel module
(including esp-hosted) because all upstream Buildroot defconfigs with a
kernel module enabled build fine today (albeit with warnings). The two
defconfigs that were pointed at by the now-reverted commit all have been
(updated for and) run on master without failing the build.
Suggested-by: Arnout Vandecappelle <arnout@rnout.be>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit a966f5cde5)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes build errors seen with Gitlab pipeline and this defconfig:
support/config-fragments/autobuild/bootlin-aarch64-glibc-old.config
https://gitlab.com/bkuhls/buildroot/-/jobs/14570080455
aarch64-linux-gcc.br_real: error: unrecognized command line option
‘-Wimplicit-fallthrough=5’; did you mean ‘-Wno-fallthrough’?
aarch64-linux-gcc.br_real: error: unrecognized command line option
‘-Wshadow=local’; did you mean ‘-Wshadow-ivar’?
Removing all the unrecognized command line options from CMakeLists.txt
showed more build errors during compile:
output/build/odhcp6c-24485bb4b35ab84c17c2e87bd561d026d4c15c00/src/odhcp6c.h:47:46:
error: expected ‘)’ before ‘__VA_OPT__’
#define error(fmt, ...) __iflog(LOG_ERR, fmt __VA_OPT__(, ) __VA_ARGS__)
Another pipeline with gcc 9 showed other errors:
https://gitlab.com/bkuhls/buildroot/-/jobs/14570080479
/builds/bkuhls/buildroot/br-test-pkg/br-arm-basic/build/odhcp6c-24485bb4b35ab84c17c2e87bd561d026d4c15c00/src/dhcpv6.c:1126:4:
error: a label can only be part of a statement and a declaration is not a statement
1126 | struct dhcpv6_auth *r = (void*)&odata[-DHCPV6_OPT_HDR_SIZE];
so we raise the minimum gcc version to 10.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit f8ea3ae2a5)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commit ce5d173571 removed
0001-fix-build-with-gcc-14.patch which the version bump to 1.4.3.
The patch originally not only fixed share/utf8.c but also
ogginfo/codec_skeleton.c. Upstream only applied the fix for
ogginfo/codec_skeleton.c:
68c5a33685
so the build still fails:
utf8.c: In function 'convert_buffer':
utf8.c:271:9: error: implicit declaration of function 'charset_convert'
[-Wimplicit-function-declaration]
271 | ret = charset_convert(fromcode, tocode, from, fromlen, to, tolen);
Added upstream commit to fix the problem.
Fixes:
https://autobuild.buildroot.net/results/135/13520e3cbf6b6d169985f4d1378c2a1baab852e0/
The build error can be reproduced by this minimal defconfig:
BR2_TOOLCHAIN_BUILDROOT_UCLIBC=y
BR2_PACKAGE_VORBIS_TOOLS=y
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 8b79a9fec5)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
For host packages, this commit adds the same `ignore_cves` list as their
target counterpart and make it available from the `show-info` output.
When generating a CycloneDX SBOM with `make show-info-all |
utils/generate-cyclonedx` and running an analysis over it with
`support/script/cve-check`, multiple vulnerabilities
entries would be created with different analysis for packages that have
both a host and target variant that include IGNORE_CVES entries.
This is the case for the grub2 package that include ignored
vulnerabilities that patch both the target and host package but aren't
declared as ignored for the host package. This resulted in
vulnerabilities marked as 'exploitable' for the host variant while it
is patched.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7a5817137b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Before this commit, only one entry per vulnerability ID was added to the
output. In CycloneDX, if you need to provide different analyses for
different affected components with the same vulnerability ID, you must
create multiple entries with the same ID.
When running `cve-check` with the `--include-resolved` argument, the
analysis of some vulnerabilities would get overwritten, which led to
undefined analysis results.
This is especially true when running the analysis on multiple components
with the same name but different versions. For instance, if the input
SBOM includes both the `gnupg` and `gnupg2` packages, CVE-2025-68973
could be included. This CVE might be exploitable for the `gnupg` package
but resolved for `gnupg2`. Therefore, a single analysis entry cannot
cover both cases.
This commit fixes the logic for adding vulnerabilities to the output
SBOM. A vulnerability is now added as a new entry if:
1. A vulnerability with the same ID doesn't exist yet.
2. The affect of the new vulnerability is not the same as the one
already present.
For the CVE-2025-68973 example this would result in the following
output:
```json
[
{
"id": "CVE-2025-68973",
"analysis": {
"state": "exploitable"
}
"affects": [
{"ref": "gnupg"}
]
},
{
"id": "CVE-2025-68973",
"analysis": {
"state": "resolved"
}
"affects": [
{"ref": "gnupg2"}
]
}
]
```
45 vulnerabilities were concerned by this bug over the Buildroot tree.
Co-Authored-By: Tim Soubry <tim.soubry@mind.be>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d4ff747a2b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The 'bom-ref' are optional and since we don't reference the
vulnerabilities from anywhere else in the SBOM they are not necessary in
this case.
In the following commit, cve-check will potentially emit multiple
vulnerabilities that have the same id. So using the vulnerability id
as 'bom-ref' won't be correct as the 'bom-ref' needs to be unique
unlike the id property.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit af55c1a39b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Always run this script from the output of 'generate-cyclonedx'. Do not re-run
this script over an already analysed SBOM.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 646356162b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Normalize vulnerability timestamps to RFC 3339 format with explicit UTC
timezone suffix for CycloneDX 1.6 compliance.
This fixes validation errors in sbom-utility and makes the generated
SBOM with vulnerabilities compatible with DependencyTrack VEX parsers.
The NVD JSON data feeds provide timestamps in ISO 8601 format without timezone
information (e.g., "1999-01-01T05:00:00.000"), but CycloneDX 1.6 requires
RFC 3339 format with explicit timezone designation (e.g.,
"1999-01-01T05:00:00.000Z").
Add nvd_datetime_to_rfc3339() helper function to convert timestamps before
serialization.
Validation results:
Before fix:
$ sbom-utility validate -i cve/cve_report_current.json
[INFO] BOM valid against JSON schema: 'false'
[INFO] (234) schema errors detected.
Error example:
{
"type": "format",
"field": "vulnerabilities.0.updated",
"context": "(root).vulnerabilities.0.updated",
"description": "Does not match format 'date-time'",
"value": "2025-04-03T01:03:51.193"
}
After fix:
$ sbom-utility validate -i cve/cve_report_update.json
[INFO] BOM valid against JSON schema: 'true'
Tested-with: sbom-utility v0.18.1
Co-authored-by: Fabien Lehoussel <fabien.lehoussel@smile.fr>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e46783d3a0)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Replace Gentoo patch from 2018 with rebased version of an upstream
commit from 2022 which also fixes build errors introduced by gcc 14.x:
access/rdp.c: In function 'postConnectHandler':
access/rdp.c:238:39: error: assignment to 'pDesktopResize' {aka 'int
(*)(struct rdp_context *)'} from incompatible pointer type 'void
(*)(rdpContext *)' {aka 'void (*)(struct rdp_context *)'}
[-Wincompatible-pointer-types]
238 | p_instance->update->DesktopResize = desktopResizeHandler;
| ^
No autobuilder error was recorded, the build error can be reproduced
with this defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_VLC=y
BR2_PACKAGE_FREERDP=y
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9097605d29)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit 324612d68e fixed several compiler warnings,
but actually introduced a new one by increasing the buffer size in confdata.c that gets passed
along to file_write_dep in util.c, because buf2's size wasn't increased along with it.
./util.c: In function ‘file_write_dep’:
./util.c:86:26: warning: ‘%s’ directive writing 10 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
86 | sprintf(buf2, "%s%s", dir, name);
| ^~
./util.c:86:9: note: ‘sprintf’ output 11 or more bytes (assuming 4107) into a destination of size 4097
86 | sprintf(buf2, "%s%s", dir, name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by increasing the size of buf2 to match the passed buffer size.
Signed-off-by: Devreese Jorik <jorik.devreese@barco.com>
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1f5095c1d3)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The commit [1] introduced fixes for the following CVEs:
- CVE-2017-8372: The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b, if NDEBUG is omitted, allows remote attackers to cause
a denial of service (assertion failure and application exit) via a
crafted audio file.
- CVE-2017-8373: The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer overflow and application crash) or possibly have
unspecified other impact via a crafted audio file.
- CVE-2017-8374: The mad_bit_skip function in bit.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer over-read and application crash) via a crafted
audio file.
In commit [2], the patches ended up not being applied anymore because
the APPLY_PATCHES step was called before the patch content exists.
This commit import the fixes in Buildroot.
[1] 858df3643f package/libmad: switch to debian to fix CVEs
[2] b21184a877 package/libmad: update the patches to be applied with fuzz 0
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9c9c531d0b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In Buildroot there are multiple way to apply patches on a package [1]
- Adding `.patch` file in the package directory.
- Define `<pkg>_PATCH` variable with the location of the patch tar.gz.
It used to download Debian patches tarball.
- Implement custom patching logic with `PRE`/`POST` patches hooks.
The libmad package is downloading a diff file from the Debian
mirror with the `<pkg>_PATCH` method [2] and then apply that diff to
create a directory containing patches. The patches are then applied in
the `PRE_PATCH_HOOK`.
The Debian patches were integrated in commit [4], in commit [5] the
application of the patches was moved to the PRE_PATCH_HOOK.
The problem is that in the PRE_PATCH step the `_PATCH` downloaded from
Debian don't exist yet and end up not being applied at all.
Since this is not used, remove the Debian patches.
[1] https://buildroot.org/downloads/manual/manual.html#patch-policy
[2] http://snapshot.debian.org/archive/debian/20190310T213528Z/pool/main/libm/libmad/libmad_0.15.1b-10.diff.gz
[3] 1167d0ff3d docs/manual: mention CVE trailer
[4] 858df3643f package/libmad: switch to debian to fix CVEs
[5] b21184a877 package/libmad: update the patches to be applied with fuzz 0
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 103f84b30f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In Buildroot there are multiple way to apply patches on a package [1]
- Adding `.patch` file in the package directory.
- Define `<pkg>_PATCH` variable with the location of the patch tar.gz.
It used to download Debian patches tarball.
- Implement custom patching logic with `PRE`/`POST` patches hooks.
To make the CycloneDX SBOM generation not dependant on downloading the
packages, the two last options have the downside of not appearing on the
generated SBOM.
The heirloom-mailx package is downloading a tarball from the Debian
mirror with the `<pkg>_PATCH` method [2].
To improve the tracking of the patched vulnerabilities for the
heirloom-mailx package this commit import the patches previously
downloaded with the `_PATCH` variable in the Buildroot tree. This allows
to add the `CVE:` trailer [3] on the patches that fix vulnerabilities to
better track which patch is fixing the vulnerability.
[1] https://buildroot.org/downloads/manual/manual.html#patch-policy
[2] http://snapshot.debian.org/archive/debian/20150815T155609Z/pool/main/h/heirloom-mailx/heirloom-mailx_12.5-5.debian.tar.xz
[3] 1167d0ff3d docs/manual: mention CVE trailer
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c9659fd9e8)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In Buildroot there are multiple way to apply patches on a package [1]
- Adding `.patch` file in the package directory.
- Define `<pkg>_PATCH` variable with the location of the patch tar.gz.
It used to download Debian patches tarball.
- Implement custom patching logic with `PRE`/`POST` patches hooks.
To make the CycloneDX SBOM generation not dependant on downloading the
packages, the two last options have the downside of not appearing on the
generated SBOM.
The unzip package is downloading a tarball from the Debian mirror with
the `<pkg>_PATCH` method [2].
To improve the tracking of the patched vulnerabilities for the unzip
package this commit import the patches previously downloaded with the
`_PATCH` variable in the Buildroot tree.
This allows to add the `CVE:` trailer [3] on the patches that fix
vulnerabilities to better track which patch is fixing the vulnerability.
[1] https://buildroot.org/downloads/manual/manual.html#patch-policy
[2] https://snapshot.debian.org/archive/debian/20250311T215724Z/pool/main/u/unzip/unzip_6.0-29.debian.tar.xz
[3] 1167d0ff3d docs/manual: mention CVE trailer
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fb8958e3dc)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See here for a changelog:
https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-22-current.html
Pjsip was updated to 2.16.
Fixes some security issues in pjsip:
Author: Mike Bradeen Date: 2026-03-23
Address the following pjproject security vulnerabilities
GHSA-j29p-pvh2-pvqp - Buffer overflow in ICE with long username
GHSA-8fj4-fv9f-hjpc - Heap use-after-free in PJSIP presense subscription termination header
GHSA-g88q-c2hm-q7p7 - ICE session use-after-free race conditions
GHSA-x5pq-qrp4-fmrj - Out-of-bounds read in SIP multipart parsing
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6add6e3cd8)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
In commit 770f915497, libjwt was bumped
from 1.17.2 to 3.2.0, which is a big bump. And the libjwt website
states "Version 3 of LibJWT is a complete overhaul of the code. Please
see documentation for usage."
And indeed, this version bump breaks the build of Asterisk:
res_stir_shaken/attestation.c: In function 'pack_payload':
res_stir_shaken/attestation.c:357:9: error: implicit declaration of function 'jwt_add_grants_json' [-Wimplicit-function-declaration]
357 | jwt_add_grants_json(jwt, payload_str);
| ^~~~~~~~~~~~~~~~~~~
In file included from /home/autobuild/autobuild/instance-11/output-1/build/asterisk-22.3.0/include/asterisk/module.h:39,
from res_stir_shaken/attestation.c:24:
res_stir_shaken/attestation.c: In function '_dtor_jwt':
res_stir_shaken/attestation.c:367:38: error: implicit declaration of function 'jwt_free'; did you mean 'jwks_free'? [-Wimplicit-function-declaration]
367 | RAII_VAR(jwt_t *, jwt, NULL, jwt_free);
| ^~~~~~~~
To fix this, let's use the bundled version of libjwt in Asterisk,
since even Asterisk master hasn't been fixed to be compatible with
libjwt 3.x.
Of course, this raises the question of whether the separate libjwt
package should be removed, as it is anyway only used by Asterisk.
Fixes:
http://autobuild.buildroot.net/results/2d39791c65c5b71b0533d4b2bce5f073f5919552/
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Bernd: Added libopenssl dependency needed by bundled libjwt]
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 61271a6c55)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Buildroot commit d4b8a42fb2 bumped the
package from 1.0.16 to 1.0.18.
Upstream added optional neon support in version 1.0.17:
f22cf00a86
The configure check detects neon support:
-- Performing Test HAVE_NEON
-- Performing Test HAVE_NEON - Success
but causes a build error at linking stage:
[100%] Linking CXX executable dec265
/builds/bkuhls/buildroot/br-test-pkg/bootlin-armv7m-uclibc/host/opt/ext-toolchain/arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real:
error: ../libde265/libde265.a(hevcdsp_qpel_neon.S.o):
conflicting architecture profiles A/M
so we add a configure option to disable neon support.
The build error was not yet detected by the autobuilders but can be
reproduced using this defconfig:
BR2_arm=y
BR2_cortex_m4=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7M_UCLIBC_STABLE=y
BR2_PACKAGE_LIBDE265=y
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f51769b7e9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The current version was more than 3 years old and had known CVEs (see
CVE-2023-36328). Since this is a host only package, we don't consider
this as a security bump.
This upgrade allows the removal of the two patches currently applied:
- The commit 1b57b62, which fixes the build with autoconf 2.72, is
already included upstream.
- We no longer need to use the JSON-PP module, as it is now
optional (commit 13d3bcf).
Also, since the latest version of Heimdal no longer depends on
e2fsprogs, the host-e2fsprogs dependency has been removed.
Signed-off-by: Guillaume Chaye <guillaume.chaye@zeetim.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 573ecbd44c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
HEIMDAL_INSTALL_STAGING = YES makes no sense since the package was
introduced in 56258f491b ("heimdal: new
package") since it's a host only package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d2d5014a8e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
wpewebkit depends directly on OpenGL ES and EGL support, but those
dependencies are not imposed by libepoxy itself. Update the inline
comments so they describe the actual dependency source before relaxing
libepoxy's package-level EGL/GL dependency.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit a4b761f395)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
For more information about the release, see:
- https://www.postgresql.org/docs/17/release-17-9.html
- https://www.postgresql.org/docs/17/release-17-10.html
Fixes the following vulnerabilities:
- CVE-2026-6479:
Prevent unbounded recursion while processing startup packets
A malicious client could crash the connected backend by alternating
rejected SSL and GSS encryption requests indefinitely.
- CVE-2026-6473
Fix assorted integer overflows in memory-allocation calculations
Various places were incautious about the possibility of integer overflow
in calculations of how much memory to allocate. Overflow would lead to
allocating a too-small buffer which the caller would then write past the
end of. This would at least trigger server crashes, and probably could
be exploited for arbitrary code execution. In many but by no means all
cases, the hazard exists only in 32-bit builds.
- CVE-2026-6476
Properly quote subscription names in pg_createsubscriber
The given subscription name was inserted into SQL commands without
quoting, so that SQL injection could be achieved in the (perhaps
unlikely) case that the subscription name comes from an untrusted
source.
- CVE-2026-6638
Properly quote object names in logical replication origin checks
ALTER SUBSCRIPTION ... REFRESH PUBLICATION interpolated schema and
relation names into SQL commands without quoting them, allowing
execution of arbitrary SQL on the publisher.
- CVE-2026-6473
Reject over-length options in ts_headline()
The StartSel, StopSel and FragmentDelimiter strings must not exceed 32Kb
in length, but this was not checked for. An over-length value would
typically crash the server.
- CVE-2026-6474
Guard against malicious time zone names in timeofday() and pg_strftime()
A crafted time zone setting could pass % sequences to snprintf(),
potentially causing crashes or disclosure of server memory. Another path
to similar results was to overflow the limited-size output buffer used
by pg_strftime().
- CVE-2026-6472
When creating a multirange type, ensure the user has CREATE privilege on
the schema specified for the multirange type.
The multirange type can be put into a different schema than its parent
range type, but we neglected to apply the required privilege check when
doing so.
- CVE-2026-6478
Use timing-safe string comparisons in authentication code.
Use timingsafe_bcmp() instead of memcpy() or strcmp() when checking
passwords, hashes, etc. It is not known whether the data dependency of
those functions is usefully exploitable in any of these places, but in
the interests of safety, replace them.
- CVE-2026-6477
Mark PQfn() as unsafe, and avoid using it within libpq
For a non-integral result type, PQfn() is not passed the size of the
output buffer, so it cannot check that the data returned by the server
will fit. A malicious server could therefore overwrite client memory.
This is unfixable without an API change, so mark the function as
deprecated. Internally to libpq, use a variant version that can apply
the missing check.
- CVE-2026-6475
Prevent path traversal in pg_basebackup and pg_rewind
These applications failed to validate output file paths read from their
input, so that a malicious source could overwrite any file writable by
these applications. Constrain where data can be written by rejecting
paths that are absolute or contain parent-directory references.
- CVE-2026-6473
Guard against field overflow within contrib/intarray's query_int type
and contrib/ltree's ltxtquery type.
Parsing of these query structures did not check for overflow of 16-bit
fields, so that construction of an invalid query tree was possible.
This can crash the server when executing the query.
- CVE-2026-6473
Guard against overly long values of contrib/ltree's lquery type.
Values with more than 64K items caused internal overflows, potentially
resulting in stack smashes or wrong answers.
- CVE-2026-6637
Prevent SQL injection and buffer overruns in contrib/spi.
check_foreign_key() was insufficiently careful about quoting key
values, and also used fixed-length buffers for constructing queries.
While this module is only meant as example code, it still shouldn't
contain such dangerous errors.
(cherry picked from commit 9fb64dfc24)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issues:
CVE-2026-33811: net: crash when handling long CNAME response
CVE-2026-33814: net/http: infinite loop in HTTP/2 transport when given bad
SETTINGS_MAX_FRAME_SIZE
CVE-2026-39817: cmd/go: "go tool pack" does not sanitize output paths
CVE-2026-39819: md/go: "go bug" follows symlinks in predictable temporary
filenames
CVE-2026-39820: net/mail: quadratic string concatenation in consumeComment
CVE-2026-39823: html/template: bypass of meta content URL escaping causes
XSS
CVE-2026-39825: net/http/httputil: ReverseProxy forwards queries with more
than urlmaxqueryparams parameters
CVE-2026-39826: html/template: escaper bypass leads to XSS
CVE-2026-39836: net: panic in Dial and LookupPort when handling NUL byte on
Windows
CVE-2026-42499: net/mail: quadratic string concatenation in consumePhrase
CVE-2026-42501: cmd/go: malicious module proxy can bypass checksum database
go1.25.10 (released 2026-05-07) includes security fixes to the go command,
the pack tool, and the html/template, net, net/http, net/http/httputil,
net/mail, and syscall packages, as well as bug fixes to the go command, the
compiler, the linker, the runtime, and the crypto/fips140, go/types, and os
packages.
https://go.dev/doc/devel/release#go1.25.10
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit c19e6d80fb)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issues:
CVE-2026-33811: net: crash when handling long CNAME response
CVE-2026-33814: net/http: infinite loop in HTTP/2 transport when given bad
SETTINGS_MAX_FRAME_SIZE
CVE-2026-39817: cmd/go: "go tool pack" does not sanitize output paths
CVE-2026-39819: md/go: "go bug" follows symlinks in predictable temporary
filenames
CVE-2026-39820: net/mail: quadratic string concatenation in consumeComment
CVE-2026-39823: html/template: bypass of meta content URL escaping causes
XSS
CVE-2026-39825: net/http/httputil: ReverseProxy forwards queries with more
than urlmaxqueryparams parameters
CVE-2026-39826: html/template: escaper bypass leads to XSS
CVE-2026-39836: net: panic in Dial and LookupPort when handling NUL byte on
Windows
CVE-2026-42499: net/mail: quadratic string concatenation in consumePhrase
CVE-2026-42501: cmd/go: malicious module proxy can bypass checksum database
go1.26.3 (released 2026-05-07) includes security fixes to the go command,
the pack tool, and the html/template, net, net/http, net/http/httputil,
net/mail, and syscall packages, as well as bug fixes to the go command, the
go fix command, the compiler, the linker, the runtime, and the
crypto/fips140, crypto/tls, go/types, and os packages.
https://go.dev/doc/devel/release#go1.26.3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit c465f0d8eb)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
go1.26.2 (released 2026-04-07) includes security fixes to the go command, the
compiler, and the archive/tar, crypto/tls, crypto/x509, html/template, and os
packages, as well as bug fixes to the go command, the go fix command, the
compiler, the linker, the runtime, and the net, net/http, and net/url packages.
CVE-2026-32289: html/template: JS template literal context incorrectly tracked
CVE-2026-33810: crypto/x509: excluded DNS constraints not properly applied to wildcard domains
CVE-2026-27144: cmd/compile: no-op interface conversion bypasses overlap checking
CVE-2026-27143: cmd/compile: possible memory corruption after bound check elimination
CVE-2026-32288: archive/tar: unbounded allocation when parsing old format GNU sparse map
CVE-2026-32283: crypto/tls: multiple key update handshake messages can cause connection to deadlock
CVE-2026-27140: cmd/go: trust layer bypass when using cgo and SWIG
CVE-2026-32280: crypto/x509: unexpected work during chain building
CVE-2026-32281: crypto/x509: inefficient policy validation
https://go.dev/doc/devel/release#go1.26.2https://github.com/golang/go/issues?q=milestone%3AGo1.26.2+label%3ACherryPickApproved
Signed-off-by: Christian Stewart <christian@aperture.us>
[Julien: add "security" in commit log title]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 82518f8cb4)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Building Go 1.26 and later requires Go 1.24.6 or later for bootstrap.
To support this we use Go version 1.25.8 as the version for
go-bootstrap-stage5 and have the build for Go 1.26.1 depend on
go-bootstrap-stage5.
Go version 1.25.8 is the latest Go version we can build using
go-bootstrap-stage4.
The package build for go-bootstrap-stage5 is effectively identical to
go-bootstrap-stage4 with only the Go version and stage number changed.
Go 1.28 is expected to require a minor release of Go 1.26 for bootstrap.
Fixes the following security vulnerabilities:
- CVE-2026-25679: net/url: reject IPv6 literal not at start of host
- CVE-2026-27142: html/template: URLs in meta attribute actions not escaped
- CVE-2026-27137: crypto/x509: incorrect enforcement of email constraints
- CVE-2026-27138: crypto/x509: panic in name constraint checking: certificates
- CVE-2026-27139: os: FileInfo can escape from a Root
For full release notes, see:
https://go.dev/doc/devel/release#go1.26.0
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 43d1323196)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following vulnerabilities:
CVE-2025-61732: cmd/cgo: remove user-content from doc strings in cgo ASTs
A discrepancy between how Go and C/C++ comments were parsed allowed for code
smuggling into the resulting cgo binary.
To prevent this behavior, the cgo compiler will no longer parse
user-provided doc comments.
CVE-2025-68121: crypto/tls: unexpected session resumption when using
Config.GetConfigForClient
Config.GetConfigForClient is documented to use the original Config's session
ticket keys unless explicitly overridden. This can cause unexpected
behavior if the returned Config modifies authentication parameters, like
ClientCAs: a connection initially established with the parent (or a sibling)
Config can be resumed, bypassing the modified authentication requirements.
If ClientAuth is VerifyClientCertIfGiven or RequireAndVerifyClientCert (on
the server) or InsecureSkipVerify is false (on the client), crypto/tls now
checks that the root of the previously-verified chain is still in
ClientCAs/RootCAs when resuming a connection.
Go 1.26 Release Candidate 2, Go 1.25.6, and Go 1.24.12 had fixed a similar
issue related to session ticket keys being implicitly shared by
Config.Clone. Since this fix is broader, the Config.Clone behavior change
has been reverted.
Note that VerifyPeerCertificate still behaves as documented: it does not
apply to resumed connections. Applications that use
Config.GetConfigForClient or Config.Clone and do not wish to blindly resume
connections established with the original Config must use VerifyConnection
instead (or SetSessionTicketKeys or SessionTicketsDisabled).
For more details, see the announcement:
https://groups.google.com/g/golang-announce/c/K09ubi9FQFk
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit f56dc6b122)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following vulnerabilities:
- CVE-2025-61728: archive/zip: denial of service when parsing arbitrary ZIP
archives
archive/zip used a super-linear file name indexing algorithm that is
invoked the first time a file in an archive is opened. This can lead to a
denial of service when consuming a maliciously constructed ZIP archive.
- CVE-2025-61726: net/http: memory exhaustion in Request.ParseForm
When parsing a URL-encoded form net/http may allocate an unexpected amount
of memory when provided a large number of key-value pairs. This can
result in a denial of service due to memory exhaustion.
- CVE-2025-68121: crypto/tls: Config.Clone copies automatically generated
session ticket keys, session resumption does not account for the
expiration of full certificate chain
The Config.Clone methods allows cloning a Config which has already been
passed to a TLS function, allowing it to be mutated and reused.
If Config.SessionTicketKey has not been set, and
Config.SetSessionTicketKeys has not been called, crypto/tls will generate
random session ticket keys and automatically rotate them. Config.Clone
would copy these automatically generated keys into the returned Config,
meaning that the two Configs would share session ticket keys, allowing
sessions created using one Config could be used to resume sessions with
the other Config. This can allow clients to resume sessions even though
the Config may be configured such that they should not be able to do so.
- CVE-2025-61731: cmd/go: unexpected code execution when invoking toolchain
The Go toolchain supports multiple VCS which are used retrieving modules
and embedding build information into binaries.
On systems with Mercurial installed (hg) downloading modules (e.g. via go
get or go mod download) from non-standard sources (e.g. custom domains)
can cause unexpected code execution due to how external VCS commands are
constructed.
On systems with Git installed, downloading and building modules with
malicious version strings could allow an attacker to write to arbitrary
files on the system the user has access to. This can only be triggered by
explicitly providing the malicious version strings to the toolchain, and
does not affect usage of @latest or bare module paths.
The toolchain now uses safer VCS options to prevent misinterpretation of
untrusted inputs. In addition, the toolchain now disallows module version
strings prefixed with a "-" or "/" character.
- CVE-2025-61730: crypto/tls: handshake messages may be processed at the
incorrect encryption level
During the TLS 1.3 handshake if multiple messages are sent in records that
span encryption level boundaries (for instance the Client Hello and
Encrypted Extensions messages), the subsequent messages may be processed
before the encryption level changes. This can cause some minor
information disclosure if a network-local attacker can inject messages
during the handshake.
For details, see the announcement:
https://groups.google.com/g/golang-announce/c/Vd2tYVM8eUc
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 22137df16b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
For relase notes, see:
https://go.dev/doc/devel/release#go1.25.0
Building Go 1.24 and later requires Go 1.22.6 or later for bootstrap.
To support this we use our previous Go version 1.23.12 as the version
for go-bootstrap-stage4 and have the build for Go 1.25.1 depend on
go-bootstrap-stage4.
Go version 1.23.12 is the latest go version we can build using
go-bootstrap-stage3.
The package build for go-bootstrap-stage4 if effectively identical to
go-bootstrap-stage3 with only the Go version and stage number changed.
Note: go version 1.25.1 release note mention a security fix
which is for CVE-2025-47910. This commit is not marked as security
bump, because the issue was introduced in version 1.25.0 which
was not included in Buildroot. See:
https://pkg.go.dev/vuln/GO-2025-3955
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Christian Stewart <christian@aperture.us>
[Julien: add link to release notes and
comment about CVE in commit log.
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ecf12c186f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2025-6020:
A flaw was found in linux-pam. The module pam_namespace may use access
user-controlled paths without proper protection, allowing local users
to elevate their privileges to root via multiple symlink attacks and
race conditions.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2025-6020
This fix was backported based on the work of the OpenEmbedded
community. See the link to the original patches in the patch header.
(cherry picked from 30e38505e4)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See the release notes: https://www.php.net/ChangeLog-8.php#8.3.31
- CVE-2025-14179:
In PHP versions, the PDO Firebird driver improperly handles NUL
bytes when preparing SQL queries. During token-by-token query
construction, a string token containing a NUL byte is copied via
strncat(), which stops at the NUL byte, dropping the closing quote
and causing subsequent SQL tokens to be interpreted as part of the
string.
This allows SQL injection when attacker-controlled values are quoted
via PDO::quote() and embedded in SQL statements.
For more information, see:
- https://github.com/php/php-src/security/advisories/GHSA-w476-322c-wpvm
- https://www.cve.org/CVERecord?id=CVE-2025-14179
- CVE-2026-6722:
In PHP versions, the SOAP extension's object deduplication mechanism
stores pointers to PHP objects in a global map without incrementing
their reference counts. When an apache:Map node contains duplicate
keys, processing the second entry overwrites the first in the
temporary result map, freeing the original PHP object while its
stale pointer remains in the map. A subsequent href reference to the
freed node can copy the dangling pointer into the result. As PHP
string allocations can reclaim the freed memory region, an attacker
with control over the SOAP request body can exploit this
use-after-free to achieve remote code execution.
For more information, see:
- https://github.com/php/php-src/security/advisories/GHSA-85c2-q967-79q5
- https://www.cve.org/CVERecord?id=CVE-2026-6722
- CVE-2026-6735:
In PHP, due to improper sanitation of user data, it allows an
attacker to compose an URL, which will cause the target to execute
arbitrary JavaScript code (XSS) on the target's machine when the
target is viewing the PHP-FPM status page.
For more information, see:
- https://github.com/php/php-src/security/advisories/GHSA-7qg2-v9fj-4mwv
- https://www.cve.org/CVERecord?id=CVE-2026-6735
- CVE-2026-7258:
In PHP, some functions, including urldecode(), pass signed char to
ctype functions (like isxdigit()). On the systems with default
signed char and optimized table-lookup ctype functions - such as
NetBSD - this can lead to accessing array with negative offset,
which can trigger a denial of service.
For more information, see:
- https://github.com/php/php-src/security/advisories/GHSA-m8rr-4c36-8gq4
- https://www.cve.org/CVERecord?id=CVE-2026-7258
- CVE-2026-7259:
In PHP, a mismatch between encoding lists in Oniguruma and mbfl
leads to a NULL pointer dereference, resulting in a segmentation
fault and denial of service. The vulnerability is exploitable when
user-controlled input can influence the encoding passed
to mb_regex_encoding().
For more information, see:
- https://github.com/php/php-src/security/advisories/GHSA-wm6j-2649-pv75
- https://www.cve.org/CVERecord?id=CVE-2026-7259
- CVE-2026-7261:
In PHP, when SoapServer is configured with SOAP_PERSISTENCE_SESSION,
the handler object is persisted across requests via session storage.
However, in the case SOAP requests results in an error, the
persistance is handled incorrectly, resulting in freeing the object
while keeping a pointer to it, which may lead to use-after-free.
This may lead to memory corruption, information disclosure, or
process crashes, with confidentiality, integrity, and availability
impact on the vulnerable system.
For more information, see:
- https://github.com/php/php-src/security/advisories/GHSA-m33r-qmcv-p97q
- https://www.cve.org/CVERecord?id=CVE-2026-7261
- CVE-2026-7262:
In PHP, when a SOAP server has a typemap configured, the decoding
process contains a mistake which checks the wrong variable in case
of missing value element. This leads to dereferences a NULL
pointer, causing a segmentation fault. This allows a remote
unauthenticated attacker to crash the PHP SOAP server process,
resulting in denial of service.
For more information, see:
- https://github.com/php/php-src/security/advisories/GHSA-hmxp-6pc4-f3vv
- https://www.cve.org/CVERecord?id=CVE-2026-7262
- CVE-2026-7568:
In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before
8.4.21, and 8.5.* before 8.5.6, the metaphone() function in
ext/standard/metaphone.c uses a signed int variable to track the
current position within the input string. If a string longer than
2,147,483,647 bytes is passed, a signed integer overflow occurs,
resulting in undefined behavior. This can lead to an out-of-bounds
read, causing a segmentation fault or access to unrelated memory, and
may affect the availability of the PHP process.
For more information, see:
- https://github.com/php/php-src/security/advisories/GHSA-96wq-48vp-hh57
- https://www.cve.org/CVERecord?id=CVE-2026-7568
(cherry picked from 952aa90078)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- Update email address to v@baodeep.com.
- Take over maintainership of package/amlogic-boot-fip.
Signed-off-by: Viacheslav Bocharov <v@baodeep.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9d4d79f9ae)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-48850:
PuTTY 0.72 before 0.84 has a double free in RSA KEX.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-48850
- CVE-2026-48851:
PuTTY 0.77 before 0.84 uses a copy of the PuTTY icon as a trust
indication for TELNET data but the trust status is not cleared between
proxy authentication and the main session.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-48851
- CVE-2026-48852:
PuTTY 0.71 before 0.84 has an assertion failure in ECDSA signature
verification.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-48852
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
BR2_PACKAGE_WESTON_XWAYLAND currently depends on BR2_PACKAGE_LIBEPOXY,
which implicitly requires either libGL or libEGL. However, the XWayland
glamor support uses libepoxy with EGL, so express that dependency
directly. With only libGL and no libEGL, it fails to build. E.g.,
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XWAYLAND=y
BR2_PACKAGE_LIBEPOXY=y
fails with:
In file included from ../glamor/glamor_priv.h:73,
from ../glamor/glamor_composite_glyphs.c:25:
../glamor/glamor_context.h:27:10: fatal error: epoxy/egl.h: No such file or directory
27 | #include <epoxy/egl.h>
| ^~~~~~~~~~~~~
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 701f8bb31c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes build error with gcc 9.x:
output/build/libheif-1.21.1/libheif/nclx.h:128:50: error:
'bool nclx_profile::operator==(const nclx_profile&)
const' cannot be defaulted
using this defconfig:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-static-2020.11.2.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_9=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_4=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
# BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG is not set
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_STATIC_LIBS=y
BR2_PACKAGE_LIBHEIF=y
According to https://github.com/strukturag/libheif/issues/1615#issuecomment-3457979167
gcc >= 10 with support for C++20 is needed for the package.
The failing code was introduced upstream in version 0.21.0 with commit
a62f933e38
which was added to buildroot with commit
a8aed698c7.
Also removed -std=c++11 from CXXFLAGS.
The build error was not yet recorded by the autobuilders.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 7323bcc1d4)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Current build generated pkgconfig/libargon2.pc has wrong version string.
Version: ZERO
Signed-off-by: Andreas Mohr <and@gmx.li>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 1ef471a61d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
NSS Makefile build system is pretty weak if used with parallel build. In
this case what happens is that 'ifndef FREEBL_NO_DEPEND' appears in
lib/freebl/manifest.mn and coreconf/Linux.mk. When parallel building
variable FREEBL_NO_DEPEND gets defined if not defined to 1, but in the
2 occurences we end up having on variable set to 1 and 1 still not
defined. This results in:
`
/home/giuliobenetti/br-reproduce/3e046c996825447f48377f7c4361b5db26b84f95/output/host/lib/gcc/arm-buildroot-linux-musleabi/14.3.0/../../../../arm-buildroot-linux-musleabi/bin/ld: Linux2.6_arm_arm-buildroot-linux-musleabi-gcc.br_real_glibc_PTH_DBG.OBJ/Linux_SINGLE_SHLIB/lowhash_vector.o: in function `loader_GetOriginalPathname':
lowhash_vector.c:(.text.loader_GetOriginalPathname+0x68): undefined reference to `PR_SetError'
collect2: error: ld returned 1 exit status
`
So let's pass FREEBL_NO_DEPEND=1 when building to define that variable
instead to let NSS Makefile to calculate it.
Fixes:
https://autobuild.buildroot.net/results/ad4/ad40536728303c56d1d0968e38ac36da12cca416//
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 6d3cc38ec0)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
There is no CVE assigned with the vendor name "cesenta".
The CPE ID introduced in [1], correctly reference "cesanta" as a CPE
vendor but introduced a typo while writing the vendor metadata in
`mongoose.mk`.
[1] 3d632c941f package/mongoose: add MONGOOSE_CPE_ID_VENDOR
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit de4044a0c9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-32853:
LibVNCServer versions 0.9.15 and prior (fixed in commit 009008e)
contain a heap out-of-bounds read vulnerability in the UltraZip
encoding handler that allows a malicious VNC server to cause
information disclosure or application crash. Attackers can exploit
improper bounds checking in the HandleUltraZipBPP() function by
manipulating subrectangle header counts to read beyond the allocated
heap buffer.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-32853
- https://github.com/LibVNC/libvncserver/security/advisories/GHSA-87q7-v983-qwcj
- 009008e2f4
- CVE-2026-32854:
LibVNCServer versions 0.9.15 and prior (fixed in commit dc78dee)
contain null pointer dereference vulnerabilities in the HTTP proxy
handlers within httpProcessInput() in httpd.c that allow remote
attackers to cause a denial of service by sending specially crafted
HTTP requests. Attackers can exploit missing validation of strchr()
return values in the CONNECT and GET proxy handling paths to trigger
null pointer dereferences and crash the server when httpd and proxy
features are enabled.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-32854
- https://github.com/LibVNC/libvncserver/security/advisories/GHSA-xjp8-4qqv-5x4x
- dc78dee51a
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 258128aefe)
[thomas: backport patch to 2025.02]
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following vulnerabilities:
- CVE-2026-4046:
The iconv() function in the GNU C Library versions 2.43 and earlier
may crash due to an assertion failure when converting inputs from the
IBM1390 or IBM1399 character sets, which may be used to remotely crash
an application. This vulnerability can be trivially mitigated by
removing the IBM1390 and IBM1399 character sets from systems that do
not need them.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-4046
- glibc-2.41-135-g61737f43b1f0d9f64a6f16649625476b70f9f4d3
- CVE-2026-4437:
Calling gethostbyaddr or gethostbyaddr_r with a configured
nsswitch.conf that specifies the library's DNS backend in the GNU C
Library version 2.34 to version 2.43 could, with a crafted response
from the configured DNS server, result in a violation of the DNS
specification that causes the application to treat a non-answer
section of the DNS response as a valid answer.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-4437
- glibc-2.41-131-gdbd8335c8ce8af11226ee1514d7a020b15c63345
- CVE-2026-4438:
Calling gethostbyaddr or gethostbyaddr_r with a configured
nsswitch.conf that specifies the library's DNS backend in the GNU C
library version 2.34 to version 2.43 could result in an invalid DNS
hostname being returned to the caller in violation of the DNS
specification.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-4438
- glibc-2.41-132-g502861645bb1baf650d58e2ddd6b230bc26676c9
> git shortlog 2.41-123-gfb4db64a0..glibc-2.41-137-gb676adadb
Carlos O'Donell (2):
resolv: Count records correctly (CVE-2026-4437)
resolv: Check hostname for validity (CVE-2026-4438)
DJ Delorie (1):
include: isolate __O_CLOEXEC flag for sys/mount.h and fcntl.h
Florian Weimer (8):
Switch currency symbol for the bg_BG locale to euro
nss: Introduce dedicated struct nss_database_for_fork type
Linux: In getlogin_r, use utmp fallback only for specific errors
nss: Missing checks in __nss_configure_lookup, __nss_database_get (bug 28940)
iconvdata: Fix invalid pointer arithmetic in ANSI_X3.110 module
posix: Run tst-wordexp-reuse-mem test
Use pending character state in IBM1390, IBM1399 character sets (CVE-2026-4046)
Linux: Only define OPEN_TREE_* macros in <sys/mount.h> if undefined (bug 33921)
Michael Jeanson (1):
tests: fix tst-rseq with Linux 7.0
Xi Ruoyao (1):
elf: parse /proc/self/maps as the last resort to find the gap for tst-link-map-contiguous-ldso
Yury Khrustalev (1):
posix: Fix invalid flags test for p{write,read}v2
Acked-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e3c662eac9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following vulnerability:
CVE-2026-4367: libXpm Out-of-bounds read in xpmNextWord()
libXpm uses a number of internal helper functions to parse the XPM file
format.
One of these internal functions, xpmNextString(), checks for the NULL
terminator when looking for the end of the current string but not when
looking for the beginning of the next string.
A small XPM file with a malformed color table definition may cause the
function xpmNextWord(), called from xpmParseColors() following a call to
xpmNextString(), to start past the actual end of the file, causing an
out-of-bound read.
Advisory:
https://lists.x.org/archives/xorg-announce/2026-April/003690.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3aa75c99c1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Backport 2 patches from upstream maintenance branch. Same fixes as
required for gcc-14.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 10ccbe079c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Backport two patches from upstream gcc-14 maintenance branch. Requires
one more patch on top of the fix for gcc-15.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit dee4991cd1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The FRR package currently only installs systemv services files. The
upstream package also provides a systemd service file and a service
template file. Install those when systemd is selected as an init
manager.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit 5af981a672)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The __name__ == '__main__' guard allows importing pkg-stats as a
module using importlib, circumventing the normal module filename
requirements. This in turn makes it possible to test/debug individual
functions.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 8cde69e101)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The file handle can be iterated over directly and each line is used
exactly once, so the only effect of reading all lines into a list
first was higher memory use and complexity.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 07f7ad9898)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The filter is supposed to exclude host/target infra from output if the
respective package is not built with the current
configuration.
However, excluding host packages did not work correctly: If keep_host
is False because the host package is not built, the next branch was
checked and included the host infra in output with "target" type if
the target package is built. For a package that support host and
target build, but gets built only for the target, this leads to output
like (Meson example):
meson (target)
host-meson (target)
Skip host infra in the target branch instead. Also include
Package.infra in Package.__str__() result, which was needed for
debugging this bug.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit e8dcebf459)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Use only one of the classes for "error" or "warning" status so they
look different, and format the error/warning text for both. Do not
make the text a link if the URL is None.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 7961bd10b9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The previous Config.* glob also caught linux/Config.ext.in and
package/php/Config.ext, as well as some backup files created by
editors (e.g. Config.in~ after editing a Config.in file in Emacs),
leading to wrong results depending on directory listing order.
Also use "with" to automatically close the file when the block is
left, even on error.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 77a464969c)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
I don't use maintain x11vnc in buildroot anymore and can't easily test.
Signed-off-by: Martin Kepplinger-Novaković <martink@posteo.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 81e72115a0)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
If sending the stop signal fails but the PID file exists the following
shutdown wait turns into an endless loop. Avoid that and return the
error immediately.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit 6558eb3d65)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
If sending the stop signal fails but the PID file exists the following
shutdown wait turns into an endless loop. Avoid that and return the
error immediately.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit 34f4732f1a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
OpenSSH checks during ./configure if the default location /var/run
exists on the build host, and defaults to ${sysconfdir} (/etc/ssh in
Buildroot) if not. This can break e.g. in a sandbox with its own mount
namespace where there is no reason to create a /var.
On the target this leads to errors when starting/stopping the service
from the init script, which expects the PID file at /var/run/sshd.pid if
sshd is running. A "stop" (including as part of "restart") or "reload"
will always fail with
no /usr/sbin/sshd found; none killed
from start-stop-daemon, even though sshd is running (because the PID
file doesn't exist where start-stop-daemon tries to read it).
On the other hand, a "start" command will try to start sshd even if it
is already running, because it cannot detect the running instance.
Unfortunately sshd does not fail directly in that situation (so the init
script completes), but something like the following appears in the log:
[May 04 14:48:05] auth sshd[4592]: error: Bind to port 22 on 0.0.0.0
failed: Address in use.
[May 04 14:48:05] auth sshd[4592]: error: Bind to port 22 on :: failed:
Address in use.
[May 04 14:48:05] auth sshd[4592]: fatal: Cannot bind any address.
Explicitly setting --with-pid-dir=/var/run overrides either default,
and only logs a warning if /var/run does not exist.
[1] 5fa60ae0d2/configure.ac (L5568-L5576)
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
[Marcus: expand commit message after discussion on ML]
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit c09bec68f1)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Bugfix release fixing crash / NULL pointer access issues and gsasl
authentication compatibility with Microsoft servers.
Mutt 2.2.14 was released on February 20, 2025. This is a bug-fix release,
fixing a couple possible crashes, in GPGME and with IMAP when logging out,
and correcting a small issue with unnecessary encoding of "." in attachment
names (2231 encoding).
Mutt 2.2.15 was released on October 2, 2025. This is a bug-fix release,
fixing an IMAP search/limit bug, a compilation issue, and containing a
workaround for gsasl SMTP authentication issues with some MS servers. A few
parts of the documentation were also improved.
Mutt 2.2.16 was released on November 22, 2025. This is a bug-fix release,
fixing a resource leak when compiled with OpenSSL/LibreSSL, which could
eventually result in new connections failing.
http://www.mutt.org/news.html
The 2.2.16 release is not available on bitbucket, so change to the official
ftp.mutt.org location instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 206cd3cd31)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Bugfix release with large number of (security) fixes.
For 6.2.26:
- a severe issue was found in the compression library (slz) where
specially crafted patterns with tune.bufsize above 17408 or
tune.maxrewrite below 964 (both non-default) could cause output
buffer overflows due to the overhead exceeding the promised
worst-case growth bound of 5 bytes and reach up to 1/16 of the
input contents. Given that the compression output is hardly
controllable, and the canaries at the end of the pools will catch
this at release time, the risk of exploitation by a hostile server
is close to zero, however it will cause repeated crashes if such a
crafted file is present on a server and regularly downloaded. A
workaround consists in keeping tune.maxrewrite at least 1/16 of
tune.bufsize or just not changing them since the defaults are safe.
A CVE was requested two weeks ago for this one, I'll mention it when
it arrives.
- HTTP/2 incomplete transfer detection was missing for HEADERS frames
carrying END_STREAM. When relayed to an HTTP/1.1 server that
responds before the end of the transfer, this can result in bytes
of the next request over the same connection to be ignored. Most of
the time it will cause the connection to be dropped due to an
unparsable request, but when combined with "http-reuse never", or
on totally idle servers, the client could expect the second request
to reuse the same connection and perform a content smuggling attack
that would allow to pass an unverified request to a server. For
those who can't upgrade, a temporary workaround is to disable
HTTP/2 by specifying "alpn http/1.1" on bind lines and adding
"disable-h2-upgrade" in HTTP frontends. A CVE will be requested for
this one.
- HTTP/1.1 bodyless messages announcing a non-null Content-Length did
not force close mode on the backend, potentially causing
desynchronisation between HAProxy and the server in conjunction
with other bugs.
- FCGI record length truncation with large bufsize (>=65544) could
enable request smuggling into PHP-FPM since the 16-bit
content_length field silently truncated to 65535 bytes.
- an unvalidated SNI name_len field in ClientHello could cause OOB
heap reads of up to 65KB via XXH3, smp_dup(), and log-format leaks
on any TCP frontend using req.ssl_sni, possibly causing crashes when
used.
- ECDSA JWT signatures with ES256/384/512 could cause a heap overflow
of ~14 bytes in the DER conversion before verification.
- Lua's httpclient headers conversion accepted more than 101 headers
without bound checking, causing a stack buffer overflow reachable
from any Lua action/task/service.
- peers dictionary cache updates accepted an unvalidated entry id as
array index, allowing OOB heap writes at attacker-controlled
offsets.
- Lua had a use-after-free of HTTP reason strings managed by Lua's GC
between set_status() and start_response(), potentially leaking
adjacent information from memory.
- the regsub sample function could leak ~9-50KB of stale heap data
when back-reference expansion overflowed the output buffer.
- SPOE decode_varint() had no iteration cap, allowing pointer
arithmetic to wrap and dereference memory ~64KB before the
allocation, causing SIGSEGV or parser confusion.
- in sample expressions, less common HTTP methods (PATCH etc.) are
represented by both an enum and a string. The string part was not
handled correctly in sample duplication functions, resulting in
their contents appearing empty when trying to fetch the method.
- QPACK varint decoding is now also limited to 62-bit, and had a risk
of 1-byte OOB reads on truncated streams, which could cause
incorrect header decoding.
- config: a few argument parsing errors in conditional expressions
used in ".if" could be misreported and even cause a crash during
the parsing. Also, a few keywords relying on warnif_misplaced_*
didn't check the return value and didn't count emitted warnings as
warnings.
For more details, see the announcement:
https://www.mail-archive.com/haproxy@formilux.org/msg47016.html
For 6.2.27:
A major issue were fixed by this release. It was related to the scheme-based
normalization. The presence of commas in Host header and authority was permitted
and would be used to compare the values, which then would differ when read via
hdr(host) which splits them on commas, and under certain circumstances, trigger
crashes (at least it did in the OSS-Fuzz environment when injecting the values
directly at the HTX layer). The issue was fixed. Remains the case of the comma
characters in authorities. Even though the spec permits commas in authorities
(not in domain names), there is currently no use case for this and it causes an
ambiguity with the historical use of hdr(host), so we preferred to just deny
them. The change was performed on the 3.4-dev10 and postponed for the next 3.3
release. It will probably be backported to lower versions too.
An issue in the FCGI multiplexer was fixed. The function responsible to emit
FCGI_PARAM records was not handling cases of full buffer in a consistent
way. The issue was quite limited, but the "http-send-name-header" option could
be silently ignored. The issue was fixed by reworking this function.
The scheme-based normalization was fixed to properly handle case of OPTIONS
requests. As stated in RFC9110#4.2.3, when the scheme-based normalization is
performed, an empty path must be normalized to "/", except for OPTIONS request.
Finally, a memory leak on error path (tools) and other minor issues were also
fixed.
For more details, see the announcement:
https://www.mail-archive.com/haproxy@formilux.org/msg47059.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 22f1e90d6b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security issues:
- CVE-2026-27654: Buffer overflow in ngx_http_dav_module when using the
alias directive with WebDAV COPY or MOVE requests.
- CVE-2026-27784 & CVE-2026-32647: Buffer overflows in ngx_http_mp4_module
when processing specially crafted MP4 files.
- CVE-2026-27651: NULL pointer dereference in the mail proxy module
during CRAM-MD5 or APOP authentication retries.
- CVE-2026-28753: DNS PTR record manipulation in auth_http or SMTP proxy.
- CVE-2026-28755: OCSP certificate check bypass in the stream module.
For a full list of changes, see:
https://nginx.org/en/CHANGES-1.28
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit 8008da299f)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See here for changes:
https://nginx.org/en/CHANGES-1.28
Following security related issues are fixed:
*) Security: processing of a specially crafted login/password when using
the "none" authentication method in the ngx_mail_smtp_module might
cause worker process memory disclosure to the authentication server
(CVE-2025-53859).
*) Security: insufficient check in virtual servers handling with TLSv1.3
SNI allowed to reuse SSL sessions in a different virtual server, to
bypass client SSL certificates verification (CVE-2025-23419).
*) Security: processing of a specially crafted mp4 file by the
ngx_http_mp4_module might cause a worker process crash
(CVE-2024-7347).
Thanks to Nils Bars.
*) Security: when using HTTP/3, processing of a specially crafted QUIC
session might cause a worker process crash, worker process memory
disclosure on systems with MTU larger than 4096 bytes, or might have
potential other impact (CVE-2024-32760, CVE-2024-31079,
CVE-2024-35200, CVE-2024-34161).
Thanks to Nils Bars of CISPA.
Update patch 0007, which does not apply cleanly.
License file was changed, year was bumped to 2025.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a0081aa1f8)
[thomas: remove previously Cherry picked commit]
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
While CVE-2019-6111 was already fixed in 2025.89, the version 2026.90
provided a follow up of that fix.
Note that the author provided this note with this patch:
> Note breaking change: "-r" is now disallowed when the target directory exists
> (an additional change in Dropbear's version). If that's required an alternative
> such as rsync could be used.
Adapt your usage of dropbear accordingly.
- CVE-2019-6111:
An issue was discovered in OpenSSH 7.9. Due to the scp implementation
being derived from 1983 rcp, the server chooses which
files/directories are sent to the client. However, the scp client only
performs cursory validation of the object name returned (only
directory traversal attacks are prevented). A malicious scp server (or
Man-in-The-Middle attacker) can overwrite arbitrary files in the scp
client target directory. If recursive operation (-r) is performed, the
server can manipulate subdirectories as well (for example, to
overwrite the .ssh/authorized_keys file).
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2019-6111
- CVE-2026-35385:
In OpenSSH before 10.3, a file downloaded by scp may be installed
setuid or setgid, an outcome contrary to some users' expectations, if
the download is performed as root with -O (legacy scp protocol) and
without -p (preserve mode).
For more information, see:
https://www.cve.org/CVERecord?id=CVE-2026-35385
[1] https://github.com/mkj/dropbear/releases/tag/DROPBEAR_2026.90
(cherry picked from commit 5b136c89ff)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-27448:
pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in
version 0.14.0 and prior to version 26.0.0, if a user provided
callback to `set_tlsext_servername_callback` raised an unhandled
exception, this would result in a connection being accepted. If a user
was relying on this callback for any security-sensitive behavior, this
could allow bypassing it. Starting in version 26.0.0, unhandled
exceptions now result in rejecting the connection.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-27448
- d41a814759
- CVE-2026-27459:
pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in
version 22.0.0 and prior to version 26.0.0, if a user provided
callback to `set_cookie_generate_callback` returned a cookie value
greater than 256 bytes, pyOpenSSL would overflow an OpenSSL provided
buffer. Starting in version 26.0.0, cookie values that are too long
are now rejected.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-27459
- 57f09bb4bb
(cherry picked from commit 7bcba8498b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Thanks to OpenEmbedded Community for providing the patches:
https://github.com/openembedded/meta-openembedded/blob/scarthgap/meta-python/recipes-devtools/python/python3-cbor2/
- CVE-2025-64076:
Multiple vulnerabilities exist in cbor2 through version 5.7.0 in the
decode_definite_long_string() function of the C extension decoder
(source/decoder.c): (1) Integer Underflow Leading to Out-of-Bounds
Read (CWE-191, CWE-125): An incorrect variable reference and missing
state reset in the chunk processing loop causes buffer_length to not
be reset to zero after UTF-8 character consumption. This results in
subsequent chunk_length calculations producing negative values (e.g.,
chunk_length = 65536 - buffer_length), which are passed as signed
integers to the read() method, potentially triggering unlimited read
operations and resource exhaustion. (2) Memory Leak via Missing
Reference Count Release (CWE-401): The main processing loop fails to
release Python object references (Py_DECREF) for chunk objects
allocated in each iteration. For CBOR strings longer than 65536 bytes,
this causes cumulative memory leaks proportional to the payload size,
enabling memory exhaustion attacks through repeated processing of
large CBOR payloads. Both vulnerabilities can be exploited remotely
without authentication by sending specially-crafted CBOR data
containing definite-length text strings with multi-byte UTF-8
characters positioned at 65536-byte chunk boundaries. Successful
exploitation results in denial of service through process crashes
(CBORDecodeEOF exceptions) or memory exhaustion. The vulnerabilities
affect all applications using cbor2's C extension to process untrusted
CBOR data, including web APIs, IoT data collectors, and message queue
processors. Fixed in commit 851473490281f82d82560b2368284ef33cf6e8f9
pushed with released version 5.7.1.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2025-64076
- CVE-2025-68131:
cbor2 provides encoding and decoding for the Concise Binary Object
Representation (CBOR) serialization format. Starting in version 3.0.0
and prior to version 5.8.0, whhen a CBORDecoder instance is reused
across multiple decode operations, values marked with the shareable
tag (28) persist in memory and can be accessed by subsequent CBOR
messages using the sharedref tag (29). This allows an attacker-
controlled message to read data from previously decoded messages if
the decoder is reused across trust boundaries. Version 5.8.0 patches
the issue.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2025-68131
- CVE-2026-26209:
cbor2 provides encoding and decoding for the Concise Binary Object
Representation (CBOR) serialization format. Versions prior to 5.9.0
are vulnerable to a Denial of Service (DoS) attack caused by
uncontrolled recursion when decoding deeply nested CBOR structures.
This vulnerability affects both the pure Python implementation and the
C extension `_cbor2`. The C extension relies on Python's internal
recursion limits `Py_EnterRecursiveCall` rather than a data-driven
depth limit, meaning it still raises `RecursionError` and crashes the
worker process when the limit is hit. While the library handles
moderate nesting levels, it lacks a hard depth limit. An attacker can
supply a crafted CBOR payload containing approximately 100,000 nested
arrays `0x81`. When `cbor2.loads()` attempts to parse this, it hits
the Python interpreter's maximum recursion depth or exhausts the
stack, causing the process to crash with a `RecursionError`. Because
the library does not enforce its own limits, it allows an external
attacker to exhaust the host application's stack resource. In many web
application servers (e.g., Gunicorn, Uvicorn) or task queues (Celery),
an unhandled `RecursionError` terminates the worker process
immediately. By sending a stream of these small (<100KB) malicious
packets, an attacker can repeatedly crash worker processes, resulting
in a complete Denial of Service for the application. Version 5.9.0
patches the issue.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-26209
(cherry picked from commit b676a4f51b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://lists.exim.org/lurker/message/20260429.121733.f58d9686.en.html
Fixes CVEs:
CVE-2026-40684 Possible crash with malicious DNS data when using musl libc
On systems using musl libc (not glibc) due to an oddity in octal printing
it is possible to crash the connection instance when malformed DNS data
is present in PTR records.
CVE-2026-40685 Possible OOB read/write on corrupt JSON in header
configurations using json operators on invalid externally-provided input
could trigger heap corruption.
CVE-2026-40686 Possible OOB read with large UTF8 trailing characters
configurations using utf8 operators on malformed utf8 in headers could
trigger OOB reads and might trigger some data leak if error
messages are required for subsequent emails in the current connection
and similar malformed headers are present.
CVE-2026-40687 Possible OOB read/write with SPA authenticator
in configurations using the SPA authentication driver to a hostile/compromised
external SPA/NTLM connnection it is possible to trigger an OOB read/write
and crash the connection instance or possibly leak heap data to the instance.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3f6d37ab9a)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This reverts commit 0d81107f02. The bug
the workaround is for was fixed in binutils 2.29.51 (first release
listed in bfd/ChangeLog after the fix), which is by now far older than
any version supported by Buildroot.
Compile tested with qemu_microblazeel_mmu_defconfig plus
BR2_PACKAGE_KMOD=y.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit 7653e616f9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/OpenSC/OpenSC/blob/0.27.1/NEWS
Switched to sha256 tarball hash provided by upstream.
Removed patch which is included in this release.
Fixes the following CVEs:
* CVE-2025-13763: Several uses of potentially uninitialized memory
detected by fuzzers
* CVE-2025-49010: Possible write beyond buffer bounds during processing
of GET RESPONSE APDU
* CVE-2025-66215: Possible write beyond buffer bounds in oberthur driver
* CVE-2025-66038: Possible read beyond buffer bounds when parsing
historical bytes in PIV driver
* CVE-2025-66037: Possible buffer overrun while parsing SPKI
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit baa0a13653)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
NetworkManager stopped requiring intltool with 1.40:
56b51b98fb/NEWS (L434)
Fixes: e7c20ad548
host-gettext is already an indirect dependency via package/libglib2.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
[Marcus: add reference to commit that updated NM to 1.40]
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit c393060c7e)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
There is no such option, and according to the commit history never
was. If BR2_PACKAGE_HOST_PYTHON3_SSL=y the build adds host-openssl to
HOST_PYTHON3_DEPENDENCIES directly.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit 201d6f4937)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
GCC 12.x is unsupported upstream but the patches from the gcc-13 release
branch are easy enough to backport. The first one (libcody fix) applies
without changes, the second one only needs to move one header instead of
two for gcc-12.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
eeb65cf0f6 manually backported upstream
util-linux security fix (util-linux: 5e390467b26a3cf3fecc04e1a0d482dff3162fc4)
but didn't account for ul_canonicalize_path being named just canonicalize_path
in 2.40.x. Use the upstream backported patch from the 2.40.x maintenance
branch instead.
Can be reproduced with the following defconfig:
BR2_arm=y
BR2_cortex_a7=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_UTIL_LINUX_LOSETUP=y
Fixes: eeb65cf0f6
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
[thomas: added defconfig]
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://download.gnome.org/sources/libxml2/2.15/libxml2-2.15.3.news
- parser: Pass userData to SAX text callbacks in xmlParseReference (type-confusion)
- entities: copy children in xmlCopyEntity
- c14n: Fix Type confusion in xmlC14NProcessAttrsAxis
- python: Do not decref string after adding to the list (double-free / use-after-free)
- c14n: Reuse tmp_str, xmlStrcat reallocates *cur (double-free)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit c1a34838b9)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Building this defconfig
BR2_x86_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_NEON=y
BR2_PACKAGE_NEON_ZLIB=y
does not build libneon with zlib support, quoting configure log:
configure: zlib not enabled
although the configure parameter
--with-zlib=/home/bernd/buildroot/output/host/x86_64-buildroot-linux-gnu/sysroot
was used.
The reason is the addition of "=$(STAGING_DIR)" to --with-zlib which was
added to buildroot in 2008 with commit
cc6562ff83.
The upstream code, which expects only "yes", all other values lead to
the else-condition, is unchanged since 2004:
https://github.com/notroj/neon/blame/0.37.1/macros/neon.m4#L478
so a backport of this patch to LTS branches should be considered.
With this patch the configure log shows:
checking for zlib.h... yes
checking for inflate in -lz... yes
configure: zlib support enabled, using -lz
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5e917c3a81)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- sources are now hosted on Github
- ficl have its own LICENSE file
- remove one upstreamed patch
- support only static lib
- requires C11
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit e7dcf9e5af)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit 1c11f9020a removed the patch
changing configure.ac with the bump to 6.10, so it is no longer
needed.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9fd8a1cf49)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See the release notes:
https://docs.djangoproject.com/en/5.2/releases/5.2.13/
In addition, update the pypi url to a stable one, which shouldn't change
in each and every release (similar to the url change in commit
60ce218196)
Finally, one hash file has changed because of upstream commit
0ee44c674c
Django 5.2.13 fixes one security issue with severity "moderate",
and four security issues with severity "low":
- CVE-2026-3902:
An issue was discovered in 6.0 before 6.0.4, 5.2 before 5.2.13, and
4.2 before 4.2.30. `ASGIRequest` allows a remote attacker to spoof
headers by exploiting an ambiguous mapping of two header variants
(with hyphens or with underscores) to a single version with
underscores. Earlier, unsupported Django series (such as 5.0.x, 4.1.x,
and 3.2.x) were not evaluated and may also be affected. Django would
like to thank Tarek Nakkouch for reporting this issue.
https://www.cve.org/CVERecord?id=CVE-2026-3902
- CVE-2026-4277:
An issue was discovered in 6.0 before 6.0.4, 5.2 before 5.2.13, and
4.2 before 4.2.30. Add permissions on inline model instances were not
validated on submission of forged `POST` data in
`GenericInlineModelAdmin`. Earlier, unsupported Django series (such as
5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank N05ec@LZU-DSLab for reporting this issue.
https://www.cve.org/CVERecord?id=CVE-2026-4277
- CVE-2026-4292:
An issue was discovered in 6.0 before 6.0.4, 5.2 before 5.2.13, and
4.2 before 4.2.30. Admin changelist forms using
`ModelAdmin.list_editable` incorrectly allowed new instances to be
created via forged `POST` data. Earlier, unsupported Django series
(such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be
affected. Django would like to thank Cantina for reporting this issue.
https://www.cve.org/CVERecord?id=CVE-2026-4292
- CVE-2026-33033:
An issue was discovered in 6.0 before 6.0.4, 5.2 before 5.2.13, and
4.2 before 4.2.30. `MultiPartParser` allows remote attackers to
degrade performance by submitting multipart uploads with `Content-
Transfer-Encoding: base64` including excessive whitespace. Earlier,
unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not
evaluated and may also be affected. Django would like to thank
Seokchan Yoon for reporting this issue.
https://www.cve.org/CVERecord?id=CVE-2026-33033
- CVE-2026-33034:
An issue was discovered in 6.0 before 6.0.4, 5.2 before 5.2.13, and
4.2 before 4.2.30. ASGI requests with a missing or understated
`Content-Length` header could bypass the
`DATA_UPLOAD_MAX_MEMORY_SIZE` limit when reading `HttpRequest.body`,
allowing remote attackers to load an unbounded request body into
memory. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and
3.2.x) were not evaluated and may also be affected. Django would like
to thank Superior for reporting this issue.
https://www.cve.org/CVERecord?id=CVE-2026-33034
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See the release notes:
https://github.com/OpenVPN/openvpn/blob/v2.6.20/Changes.rst
This fixes 2 security issues:
- CVE-2026-40215:
race condition in TLS handshake that could lead to leaking of packet
data from a previous handshake under specific circumstances
- CVE-2026-35058:
server ASSERT() on receiving a suitably malformed packet with a valid
tls-crypt-v2 key
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit 1a4a04fe29)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
For change log, see:
https://logging.apache.org/log4cxx/1.7.0/changelog.html
This fixes the following vulnerability:
- CVE-2026-40023:
Apache Log4cxx's XMLLayout
https://logging.apache.org/log4cxx/1.7.0/classlog4cxx_1_1xml_1_1XMLLayout.html,
in versions before 1.7.0, fails to sanitize characters forbidden
by the XML 1.0 specification https://www.w3.org/TR/xml/#charsets
in log messages, NDC, and MDC property keys and values, producing
invalid XML output. Conforming XML parsers must reject such
documents with a fatal error, which may cause downstream log
processing systems to drop or fail to index affected records.
An attacker who can influence logged data can exploit this
to suppress individual log records, impairing audit trails and
detection of malicious activity. Users are advised to upgrade to
Apache Log4cxx 1.7.0, which fixes this issue.
https://www.cve.org/CVERecord?id=CVE-2026-40023
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
[Julien: add link to change log in commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 1d5c6d18da)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
commit cf686670b9 introduced a patch that
was later included in a release which made the usage of libesmtp
configurable. Later the switch was moved to the main CMakeLists.mk [0].
while the patch introduced the build flag LOG4CXX_ENABLE_ESMTP the
change to the .mk file used LOG4CXX_ENABLE_LIBESMTP.
So correct this.
Fixes:
CMake Warning:
Manually-specified variables were not used by the project:
LOG4CXX_ENABLE_LIBESMTP
[0] https://github.com/apache/logging-log4cxx/blob/rel/v1.3.1/CMakeLists.txt#L93
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 70a16560b2)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-27456: mount(8) TOCTOU symlink attack via loop device. The SUID
mount follows symlinks when resolving loop backing file paths. On
systems where non-root users are permitted to mount loop devices (via
'user' option in fstab), this allows access to arbitrary files.
For more information, see:
- https://nvd.nist.gov/vuln/detail/CVE-2026-27456
- 5e390467b2
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit cd52acda14)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
The host-mkpasswd package needs the <crypt.h> header file installed
on the host. This file was initially provided by the libc headers,
as part of its libcrypt implementation. libcrypt was removed in
glibc 2.39. Most Linux distributions continued to ship a libcrypt
replacement such as libxcrypt in their default installation.
Some mainstream Linux distribution (such as Debian testing) are
now starting to remove this libcrypt and <crypt.h> header from their
default image (of development files).
In that case, host-mkpasswd is failing to build with the error:
/buildroot/output/build/host-mkpasswd/mkpasswd.c:54:10: fatal error: crypt.h: No such file or directory
The issue can be reproduced by adapting the Buildroot Docker file,
by setting "FROM debian:testing-20260316" in [1] and removing
the build of tar.
Note: debian 13 (for example Docker tag trixie-20260316) still
includes the libcrypt-dev package by default, which provides crypt.h.
In Buildroot, there is already the host-heimdal and host-systemd
packages requiring host-libxcrypt. Also, the host-libxcrypt is a
small standalone package. For those reasons, instead of adding
the Buildroot prerequisite on the user host to provide a libcrypt
implementation, this commit simply add the package dependency to
host-libxcrypt, to make sure it will work in all situations.
[1] https://gitlab.com/buildroot.org/buildroot/-/blob/2026.02/support/docker/Dockerfile#L11
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
(cherry picked from commit cf26c77280)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
https://github.com/libexif/libexif/blob/v0.6.26/NEWS
* Security issues fixed:
* CVE-2026-40386: An unsigned integer underflow in Fuji and Olympus
makernote handling
* CVE-2026-40385: An unsigned integer overflow on 32bit systems in
Nikon makernote handling
* CVE-2026-32775: A buffer overwrite via integer underflow in makernote
handling
Switched to xz tarball and tarball hash provided by upstream.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3f9bcf42c3)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
This fixes the following vulnerability:
- CVE-2026-25075:
strongSwan versions 4.5.0 prior to 6.0.5 contain an integer underflow
vulnerability in the EAP-TTLS AVP parser that allows unauthenticated
remote attackers to cause a denial of service by sending crafted AVP
data with invalid length fields during IKEv2 authentication. Attackers
can exploit the failure to validate AVP length fields before
subtraction to trigger excessive memory allocation or NULL pointer
dereference, crashing the charon IKE daemon.
https://www.cve.org/CVERecord?id=CVE-2026-25075
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit cc7c20d817)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Using this defconfig
BR2_x86_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_PACKAGE_STRONGSWAN=y
BR2_PACKAGE_STRONGSWAN_WOLFSSL=y
applied after 'git reset 10a70b1af6 --hard'
replicates the build error
http://autobuild.buildroot.net/results/278b3f74c48c858ae368d59069752adb69c05246
which was fixed in 2024 by
89d512729c
Note: The git tree was reset to the commit right before the fix.
Instead of using the fix mentioned above the build error is also fixed
when the buildroot commit 6c18375434 is
cherry-picked onto 10a70b1af6.
This means the build error mentioned above is really fixed by enabling
BR2_PACKAGE_WOLFSSL_ALL. Therefore we can remove the content of commit
89d512729c.
This commit also prevents a build error in strongswan
wolfssl_rsa_private_key.c: In function 'create_empty':
wolfssl_rsa_private_key.c:450:18: error: 'RsaKey' has no member named 'rng'
450 | this->rsa.rng = &this->rng;
caused by the upcoming bump of wolfSSL from 5.7.2 to 5.9.1 due to
upstream commit
cd88a8ae88
which was first included in wolfSSL 5.9.0.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5d6378db9d)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Fixes the following security vulnerability:
- CVE-2026-23865:
An integer overflow in the tt_var_load_item_variation_store function
of the Freetype library in versions 2.13.2 and 2.13.3 may allow for an
out of bounds read operation when parsing HVAR/VVAR/MVAR tables in
OpenType variable fonts. This issue is fixed in version 2.14.2.
For more information, see
- https://www.cve.org/CVERecord?id=CVE-2026-23865
- fc85a25584.patch
(cherry picked from commit 6c3933d14b)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
- CVE-2026-34743:
XZ Utils provide a general-purpose data-compression library plus
command-line tools. Prior to version 5.8.3, if lzma_index_decoder()
was used to decode an Index that contained no Records, the resulting
lzma_index was left in a state where where a subsequent
lzma_index_append() would allocate too little memory, and a buffer
overflow would occur. This issue has been patched in version 5.8.3.
For more information, see:
- https://www.cve.org/CVERecord?id=CVE-2026-34743
- https://security-tracker.debian.org/tracker/CVE-2026-34743
- c8c22869e7
(cherry picked from commit 7246352273)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Commit [1] introduced a set of patches to fix CVE-2025-31115.
Since [2] the security patches neeed to reference the vulnerability with
the `CVE: ` trailer in the patch header.
This set of patch is no longer present on master branch with xz bump [3]
but hasn't been cherry picked to 2025.02.x branch.
[1] 06c6c49fe8 package/xz: add security patches fixing CVE-2025-31115
[2] 1167d0ff3d docs/manual: mention CVE trailer
[3] aaa50b0e61 package/xz: bump to version 5.8.1
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
See the release notes: https://www.python.org/downloads/release/python-31213/
This fixes a handful of bugs and the following vulnerability:
- CVE-2024-6923:
There is a MEDIUM severity vulnerability affecting CPython. The
email module didn’t properly quote newlines for email headers when
serializing an email message allowing for header injection when an
email is serialized.
https://www.cve.org/CVERecord?id=CVE-2024-6923
This also includes a mitigation for a libexpat vulnerability:
- CVE-2025-59375:
libexpat in Expat before 2.7.2 allows attackers to trigger large
dynamic memory allocations via a small document that is submitted for
parsing.
https://www.cve.org/CVERecord?id=CVE-2025-59375
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
(cherry picked from commit f862711b10)
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
