Fixes the following security issue:
CVE-2022-42898: In MIT krb5 releases 1.8 and later, an authenticated
attacker may be able to cause a KDC or kadmind process to crash by reading
beyond the bounds of allocated memory, creating a denial of service. A
privileged attacker may similarly be able to cause a Kerberos or GSS
application service to crash. On 32-bit platforms, an attacker can also
cause insufficient memory to be allocated for the result, potentially
leading to remote code execution in a KDC, kadmind, or GSS or Kerberos
application server process. An attacker with the privileges of a
cross-realm KDC may be able to extract secrets from a KDC process's memory
by having them copied into the PAC of a new ticket.
Bugfix tarballs are located in the same directory as the base version, so
introduce LIBKRB5_VERSION_MAJOR.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 3dbc86f098 (openssl: bump version, enable mdc2+camellia+tlsext)
form 2010-06-03, forced the build of mdc2. Commit a83d41867c
(package/libopenssl: add option to enable some features) added an option
to explicitly disable mdc2, but forgot to amend the existing enabling
option.
It appears that, like most (all?) openssl config options, mdc2 ends up
enabled unless explicitly disabled.
Additionally, mdc2 depends on DES, so without DES, mdc2 gets disabled.
So, drop the explicit enabling option, and make mdc2 select DES.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "GAUTRON, Erwan" <erwan.gautron@bertin.fr>
Cc: "Weber, Matthew L Collins" <Matthew.Weber@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit a83d41867c (package/libopenssl: add option to enable some
features) added an option to enable rc5. However, since commit
1fff941219 (Fixup non-x86 openssl build), dated 2002-12-30, rc5
has always been forcibly disabled in Buildroot.
Given that it was unconditionally disabled all this time, and no
one complained, it means there is virtually no-one using rc5, so we
can just drop the option.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "GAUTRON, Erwan" <erwan.gautron@bertin.fr>
Cc: "Weber, Matthew L Collins" <Matthew.Weber@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
If the swupdate configuration contains CONFIG_UBOOT=y it uses
libubootenv to access the U-Boot environment.
We don't have Buildroot config options for all the different optional
dependencies of swupdate, instead we rely on the user to select the
appropriate packages and simply add the dependency in the .mk file. Do
this for libubootenv as well. swupdate doesn't have anything like
HAVE_LIBUBOOTENV, it just assumes libubootenv is available.
Fixes:
bootloader/uboot.c:23:10: fatal error: libuboot.h: No such file or directory
23 | #include <libuboot.h>
Note that libubootenv is normally built before swupdate (alphabetical
ordering), so the error only occrus with BR2_PER_PACKAGE_DIRECTORIES or
when building swupdate directly.
Note that the autobuilders don't have this error, because they only
build swupdate with a default configuration that doesn't have U-Boot
support.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This release fixes the following Security Vulnerabilities:
- CVE-2022-42898 PAC parse integer overflows
- CVE-2022-3437 Overflows and non-constant time leaks in DES{,3} and
arcfour
- CVE-2022-41916 Fix Unicode normalization read of 1 bytes past end of
array
- CVE-2021-44758 NULL dereference DoS in SPNEGO acceptors
- CVE-2021-3671 A null pointer de-reference when handling missing sname
in TGS-REQ
- CVE-2022-44640 Heimdal KDC: invalid free in ASN.1 codec
Note that CVE-2022-44640 is a severe vulnerability, possibly a 10.0
on the Common Vulnerability Scoring System (CVSS) v3, as we believe
it should be possible to get an RCE on a KDC, which means that
credentials can be compromised that can be used to impersonate
anyone in a realm or forest of realms.
Heimdal's ASN.1 compiler generates code that allows specially
crafted DER encodings of CHOICEs to invoke the wrong free function
on the decoded structure upon decode error. This is known to impact
the Heimdal KDC, leading to an invalid free() of an address partly
or wholly under the control of the attacker, in turn leading to a
potential remote code execution (RCE) vulnerability.
This error affects the DER codec for all extensible CHOICE types
used in Heimdal, though not all cases will be exploitable. We have
not completed a thorough analysis of all the Heimdal components
affected, thus the Kerberos client, the X.509 library, and other
parts, may be affected as well.
This bug has been in Heimdal's ASN.1 compiler since 2005, but it may
only affect Heimdal 1.6 and up. It was first reported by Douglas
Bagnall, though it had been found independently by the Heimdal
maintainers via fuzzing a few weeks earlier.
While no zero-day exploit is known, such an exploit will likely be
available soon after public disclosure.
- CVE-2019-14870: Validate client attributes in protocol-transition
- CVE-2019-14870: Apply forwardable policy in protocol-transition
- CVE-2019-14870: Always lookup impersonate client in DB
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The edk2 project is licensed under the BSD-2-Clause license with a patent
grant, as per commit 304bff7223a8 ("edk2: Change License.txt from 2-Clause
BSD to BSD+Patent").
There is a BSD-2-Clause-Patent SPDX license identifier[1] for this case,
therefore refine the edk2 package to use this more specific identifier.
[1]: https://spdx.org/licenses/BSD-2-Clause-Patent.html
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The edk2-platforms project is licensed under the BSD-2-Clause license with
a patent grant, as per commit ae604e4ffe8f ("edk2-platforms: Change
License.txt from 2-Clause BSD to BSD+Patent").
There is a BSD-2-Clause-Patent SPDX license identifier[1] for this case,
therefore refine the edk2-platforms package to use this more specific
identifier.
[1]: https://spdx.org/licenses/BSD-2-Clause-Patent.html
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issue:
CVE-2022-45061: An issue was discovered in Python before 3.11.1. An
unnecessary quadratic algorithm exists in one path when processing some
inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably
long name being presented to the decoder could lead to a CPU denial of
service. Hostnames are often supplied by remote servers that could be
controlled by a malicious actor; in such a scenario, they could trigger
excessive CPU consumption on the client attempting to make use of an
attacker-supplied supposed hostname. For example, the attack payload could
be placed in the Location header of an HTTP response with status code 302.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d07e6b70 (boot/uboot/uboot.mk: add pmufw.elf support) broke
configurations where the UBOOT_ZYNQMP_PMUFW was blank. Previously it
would set the U-Boot CONFIG_PMUFW_INIT_FILE to the blank string, but now
it will set it to ".bin" which causes U-Boot to fail to build.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Brings a number of fixes: https://dev.gnupg.org/T6106
Add patch 0001 to fix undefined reference to `ks_ldap_free_state'
backported from commit 7011286ce6e1fb56c2989fdafbd11b931c489faa
Signed-off-by: Michael Fischer <mf@go-sys.de>
[Peter: add changelog info]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Copy default $DAEMON_ARGS from systemd service to sysv init script.
Make GITLAB_RUNNER_USER home directory the same as default
--work-directory (-d) flag.
Run sysv daemon process using root user (remove -c option)
This is needed to correctly access config files as specified.
System access can still be limited with gitlab-runner `--user` flag.
Use same $DAEMON_ARGS variable name so it can be overwritten in
/etc/default/gitlab-runner environment file in both cases.
Signed-off-by: Marek Metelski <marek.metelski@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In 5b3b2d80f4 we dropped dbus as a build
dependency, however we still need it when building with systemd so
that the service directory is available via pkg-config.
In addition we can drop --with-dbus-datadir by unconditionally
requiring dbus as the datadir will then be fetched from pkg-config.
Fixes:
checking D-Bus bus services directory... configure: error: D-Bus bus services directory is required
http://autobuild.buildroot.net/results/4a48676460e6ce588897598f0022ec840b4b4b8d/
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The edk2 package can be configured for platform Arm Sgi575 but this
does not build correctly:
Usage: build.exe [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]
build.exe: error: option -a: invalid choice: '-b' (choose from 'IA32', 'X64', 'EBC', 'ARM', 'AARCH64', 'RISCV64')
make[1]: *** [package/pkg-generic.mk:293: /home/thomas/buildroot/buildroot/output/build/edk2-edk2-stable202102/.stamp_built] Error 2
make: *** [Makefile:84: _all] Error 2
Add the necessary definitions to fix the build.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I am not really maintaining these packages, I don't follow closely
enough nor use them to take the time to make the necessary changes.
Giulio has been much more reactive than me to fix issues and he is
already listed for them anyway.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
igh-ethercat comes with a small number of patched Linux kernel network
drivers, which aim at replacing the ones available in upstream Linux
kernel. All those drivers are provided only for specific kernel
releases. For example:
r8169-2.6.24-ethercat.c
r8169-2.6.24-orig.c
r8169-2.6.27-ethercat.c
r8169-2.6.27-orig.c
r8169-2.6.28-ethercat.c
r8169-2.6.28-orig.c
r8169-2.6.29-ethercat.c
r8169-2.6.29-orig.c
r8169-2.6.31-ethercat.c
r8169-2.6.31-orig.c
r8169-2.6.32-ethercat.c
r8169-2.6.32-orig.c
r8169-2.6.33-ethercat.c
r8169-2.6.33-orig.c
r8169-2.6.35-ethercat.c
r8169-2.6.35-orig.c
r8169-2.6.36-ethercat.c
r8169-2.6.36-orig.c
r8169-2.6.37-ethercat.c
r8169-2.6.37-orig.c
r8169-3.10-ethercat.c
r8169-3.10-orig.c
r8169-3.12-ethercat.c
r8169-3.12-orig.c
r8169-3.14-ethercat.c
r8169-3.14-orig.c
r8169-3.16-ethercat.c
r8169-3.16-orig.c
r8169-3.2-ethercat.c
r8169-3.2-orig.c
r8169-3.4-ethercat.c
r8169-3.4-orig.c
r8169-3.6-ethercat.c
r8169-3.6-orig.c
r8169-3.8-ethercat.c
r8169-3.8-orig.c
r8169-4.4-ethercat.c
r8169-4.4-orig.c
Obviously, this doesn't play well with the random configuration
testing done by utils/genrandconfig. This commit avoids this issue by
making sure we never build any of those drivers as part of the
genrandconfig generated configurations.
Fixes:
http://autobuild.buildroot.net/results/07b7475d780c067d99ee5618a5fd2bb024a5b4e7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current version 1.5.2 dates back from 2013, so it is extremely
old. The latest master branch of igh-ethercat contains numerous fixes,
including fixes to ensure that it builds with recent Linux kernel
releases. Backporting the individual patches fixing those issues on a
9 year old release would be too much effort, so we propose to simply
bump the version to the latest available in the Git master branch.
Fixes:
http://autobuild.buildroot.net/results/4dc9b71c805a8156bcf8f398edd3a30f2b6ac6da/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes#6421
Backport from: da9ba3a2a1536017e4ce1ee0f4276578d1ce6e29
Signed-off-by: Michael Fischer <mf@go-sys.de>
[yann.morin.1998@free.fr: make it an actual backport]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following runtime failure raised since bump of popt to version
1.19 in commit 895bfba93f:
Problem opening for reading! Error is 2.
The specified file does not exist!
Fixes:
- No autobuilder failure
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issue:
- CVE-2022-3821: An off-by-one Error issue was discovered in Systemd in
format_timespan() function of time-util.c. An attacker could supply
specific values for time and accuracy that leads to buffer overrun in
format_timespan(), leading to a Denial of Service.
https://github.com/systemd/systemd/issues/23928
Drop now upstream 0001-missing-syscall-define-MOVE_MOUNT_T_EMPTY_PATH-if-mi.patch
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2022-39377: sysstat is a set of system performance tools for the
Linux operating system. On 32 bit systems, in versions 9.1.16 and newer
but prior to 12.7.1, allocate_structures contains a size_t overflow in
sa_common.c. The allocate_structures function insufficiently checks
bounds before arithmetic multiplication, allowing for an overflow in the
size allocated for the buffer representing system activities. This issue
may lead to Remote Code Execution (RCE).
Despite what is written above in the CVE announcement, and as written in
the Changelog, the fix is also included in version 12.6.1 (12.7.1 is a
development version):
c1e631eddc
As a consequence, 12.6.1 is still reported as being affected. Until the
NVD is updated appropriately, we mark the CVE as ignored with a comment
that explains why.
Note: that commit is not reachable from any branch in the sysstat
repository, and Github warns about that, but the commit does belong to
the upstream repository and is reachable from the 12.6.1 tag (it looks
like sysstat only pushes tags-with-history for fix releases).
https://github.com/sysstat/sysstat/security/advisories/GHSA-q8r6-g56f-9w7xhttps://github.com/sysstat/sysstat/blob/v12.6.1/CHANGES
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- ignore the CVE, explain why
- explain why github warns about the fix commit
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issue:
DNS rebinding in --inspect via invalid octal IP address (Medium) (CVE-2022-43548)
The Node.js rebinding protector for --inspect still allows invalid IP
address, specifically, the octal format. An example of an octal IP address
is 1.09.0.0, the 09 octet is invalid because 9 is not a number in the base 8
number system. Browsers such as Firefox (tested on latest version m105)
will still attempt to resolve this invalid octal address via DNS. When
combined with an active --inspect session, such as when using VSCode, an
attacker can perform DNS rebinding and execute arbitrary code
Update license hash for an update of base64 (MIT license) and a change in
copyright year:
8ea9a71b159f14dc1a8f
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A severe bug has been found in Libksba , the library used by GnuPG for parsing
the ASN.1 structures as used by S/MIME. The bug affects all versions of Libksba
before 1.6.2 and may be used for remote code execution.
Fix CVE-2022-3515
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Rename configure options to avoid the following build failure raised
since bump to version 3.2.5 in commit
ae2807821d:
./simd-checksum-x86_64.cpp: In function 'uint32_t get_checksum1_cpp(char*, int32_t)':
./simd-checksum-x86_64.cpp:89:52: error: multiversioning needs 'ifunc' which is not supported on this target
89 | __attribute__ ((target("default"))) MVSTATIC int32 get_checksum1_avx2_64(schar* buf, int32 len, int32 i, uint32* ps1, uint32* ps2) { return i; }
| ^~~~~~~~~~~~~~~~~~~~~
./simd-checksum-x86_64.cpp:480:1: error: use of multiversioned function without a default
480 | }
| ^
If you can't fix the issue, re-run ./configure with --disable-roll-simd.
Fixes:
- http://autobuild.buildroot.org/results/069da8e585da2e51bfd4f475cc12b9a134954b08
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libvncclient v0.9.13 was discovered to contain a memory leak via the
function rfbClientCleanup().
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_XTENSA_CUSTOM=y is used with the internal toolchain, an
overlay file is mandatory, which genrandconfig can't provide. So we
simply disallow such configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4cbf733691 ("arch/xtensa: custom
configuration requires an overlay") added a check in
arch/arch.mk.xtensa to bail out if a custom Xtensa core is selected
but not overlay file is provided. While this is indeed a perfectly
valid check to make when building an internal toolchain, with an
external toolchain it's entirely possible to build with no overlay
file: the toolchain already exists, and there's no overlay to be
applied in the context of the Buildroot build.
And indeed commit 4cbf733691 broke some
of the runtime test cases that use a custom Xtensa core configuration,
with no overlay, to test the toolchains.bootlin.com Xtensa external
toolchain. By relaxing the check to only apply to internal toolchain
configurations, we fix those test cases.
It is to be noted that this still allows a configuration where gdb gets
built for a custom core, but with no overlay, so basically that means
the fsf variant, which can lead to build or run failures that
4cbf733691 attempted to fix to begin with. This still covers the
most common cases.
Finally, it also means being able to build a kernel with no overlay, but
this is offset by the fact that the kernel may be already patched with
an overlay (as it is possible to specify a custom kernel), which is most
probably what people using a custom core would have.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3282261966https://gitlab.com/buildroot.org/buildroot/-/jobs/3282261963
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: extend commit log with last two paragraphs]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
dracut is not really ready to be installed with a non-/ prefix, and it
has a lot of hard-coded assumptions that it is going to run on the host
for which it is goign to generate an initramfs; for example, it
hard-codes calls to /lib/dracut/some-file in some of its modules. It
also uses the host system layout to decide whether it needs a
merged-usr or not.
Furthermore, dracut populates the temporary directory which content will
be used to generate the cpio, with a bunch of files, even before calling
any of the dracut modules.
The name for that temporary directory is not predictable (looks like the
output of 'mktemp -d dracut.XXXXXX', with names like dracut.1Vfn9F seen
while debugging).
As a consequence, we can't prepare the temporary directory with the
proper symlinks beforehand.
So, we provide a very-early module of our own, that will (hopefully) run
before any other module, to fixup the messed-up layout prepared by
dracut. This module moves the content of /lib, /bin, and /sbin, out and
into their counterparts in /usr, and creates the usual symlinks.
When we do not require a merged-usr, then we have nothing to do, so the
module checks for /lib being a symlink, as the hint that we want a
merged-usr or not.
Note: currently, we've seen nothing that dracut installed in /bin or
/sbin, but for trying to be future-proof, we also handle them; this
causes a spurious warning:
mv: cannot stat '..../build/buildroot-fs/cpio/tmp/dracut.YQnzNP/initramfs/bin/*': No such file or directory
Since there are already quite a bunch of similar failures in the
official modules bundled in dracut, an extra such issue or two should
not be too scary...
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3282261241https://gitlab.com/buildroot.org/buildroot/-/jobs/3282261239https://gitlab.com/buildroot.org/buildroot/-/jobs/3282261236
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd does not build with -Ofast (at least with gcc-12), leading to
build errors like:
../src/shared/condition.c: In function ‘condition_dump_list’:
../src/shared/condition.c:1227:33: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
1227 | "%s\t%s: %s%s%s %s\n",
| ^~
cc1: some warnings being treated as errors
It is not really clear what the reason is, but it smells like a compiler
error.
Indeed, the failing format is passed to an fprintf, and the parameter
corresponding to the failing %s directive is a call to a function
which prototype is defined but the implementation only comes later in
the same compilation unit, but is the result of macro expansion, which
yields a function definition like:
const char foo_to_string(foo_type i) {
if (i < 0 || i >= (foo_type) ELEMENTSOF(foo_table))
return NULL;
return foo_table[i]
}
(where ELEMENTSOF(x) is a macros arounf sizeof(x) to determine the
number of elements in the array foo_table).
However, in the failing case, foo_table is a static const array indexed
with constants from an enum, and foo_to_string() is only ever called
with variables that are only ever set to one of those enum values.
Since -Ofast is also explicitly documented as breaking otehrwise
conformant programs, we're not going to debug further the reason for the
build failure.
Instead, just revert to the best alternate optimisation level. We chose
-O3, as -Ofast is based on -O3 with breaking optimisation flags.
With -O3, the build succeeds.
Fixes:
http://autobuild.buildroot.org/results/3ffaa9b3ecacc6ac326be78196af1ad613f195ed/ (sparc64)
http://autobuild.buildroot.org/results/3f6ae2e503dd1539e4240f344865da4881879204/ (arm)
http://autobuild.buildroot.org/results/68c17056490d441c7f862349e9c7e471b4570162/ (ppc64)
...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Cc: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
matchbox-startup-monitor is an ageing package, and uses an old
configure.ac with archaic constructs. This had generated a configure
script that incorrectly tries to look for and validate a C++ compiler:
checking for powerpc64le-buildroot-linux-gnu-g++... no
checking whether we are using the GNU C++ compiler... no
checking whether no accepts -g... no
checking dependency style of no... none
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
Calling autoreconf fixes the issue, as the generated configure no longer
tries to look for a C++ compiler at all anymore. Running autoreconf does
not add any new dependency, as they are already in the dependency chain
via other packages.
Fixes:
http://autobuild.buildroot.org/results/223/223f43dd76ee907c5f25c4fee94a0f5d75614dd5/
See also similar changes:
9993a36f5e package/pamtester: fix build without C++
c05cc5de86 package/madplay: needs autoreconf
eae18d01ab libmad: needs autoreconf
43274dd3e0 package/libid3tag: needs autoreconf
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ATF version 2.2 and older does not disable SSP when
ENABLE_STACK_PROTECTOR is not set. This is because the compiler enables
SSP by default, and ATF does not pass -fno-stack-protector to the
compiler. Upstream commit 7af195e29a42 ("Disable stack protection
explicitly") fixed the issue for v2.3 and newer.
Add -fno-stack-protector in CFLAGS when
BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is not set to fix older ATF
versions.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3301821171
Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since upstream commit
07f3b487f9
(which first appeared in version 7.1.0-47), ImageMagick forces the
need of a C++ compiler to build its utilities. Despite the request of
Bernd Kuhls to revert this change, upstream declined.
Since this change is causing build failures in our autobuilders, our
only choice is to follow the choice of upstream, and disable building
the utilities when C++ support is not available.
Fixes:
http://autobuild.buildroot.net/results/4283235d697408cf2e70be5e3769dbe6ebb9ddae/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
sudo's configure script looks up on the host to determine the path where
to install its systemd tmpfiles. That is incorrect in cross-compilation.
We can explicitly tell sudo where to install its tmpfiles, which we do
when systemd is enabled (in Buildroot, systemd-tmpfiles is always
enabled when systemd is), or we can tell it not to install tmpfiles at
all, which we do otherwise.
Signed-off-by: Nuno Gonçalves <nunog@fr24.com>
[yann.morin.1998@free.fr: reword and extend commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
sudo's configure script looks up on the host to determine the path to
the timezone data location. That fails in cross-compilation.
This is used to sanitise the TZ envirnment variable at runtime, and is
not used at buildtime (except to be stored as a string in the program).
We can tell sudo where the tz data will be, which we do when the tzdata
package is enabled, and we can tell it not to use it at all (to not pass
TZ down to sudo-ed executions) othwerwise.
Signed-off-by: Nuno Gonçalves <nunog@fr24.com>
[yann.morin.1998@free.fr: rewrite and extend commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 223516b51e (configs/kontron_bl_imx8mm: U-Boot needs util-linux)
added the needed dependency against host-util-linux, but missed an
earlier comment about u-boot still failing [0]
The U-Boot makefile for the host tools does not handle the
compiler/linker options properly. There are some patches [1][2] that fixes
that issue already applied in the newer U-Boot version 2022.10. So we have to
bump U-Boot to fix an autobuilder failure.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3267233833
[0] https://lore.kernel.org/buildroot/CAEyMn7Y3UgT-8dYY5rbnzcPfbGmqRVXG=joWx1fSSCC=WiFzbg@mail.gmail.com/
[1] U-Boot: a638bd349ea43825 (kbuild: add KBUILD_HOSTLDFLAGS to cmd_host-csingle)
[2] U-Boot: 31a7688cbe0ed5ed (tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls)
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- update commit log with reference to [0]
- slightly tweak commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump to version 0.9.4 in
commit 5cae1a0d67:
In file included from iw_if.h:26:0,
from conf.c:19:
/home/buildroot/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/linux/if.h:71:2: error: redeclaration of enumerator 'IFF_UP'
IFF_UP = 1<<0, /* sysfs */
^
/home/buildroot/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/net/if.h:44:5: note: previous definition of 'IFF_UP' was here
IFF_UP = 0x1, /* Interface is up. */
^
Fixes:
- http://autobuild.buildroot.org/results/cbdf3e0cf0bee8f1b076581768c24155afc320d9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following systemd build failure raised since bump to version
5.0.1 in commit db19998035:
../src/lxc/cgroups/cgfsng.c: In function 'unpriv_systemd_create_scope':
../src/lxc/cgroups/cgfsng.c:1234:104: error: incompatible type for argument 10 of 'sd_bus_call_method_asyncv'
r = sd_bus_call_method_asyncv(bus, NULL, DESTINATION, PATH, INTERFACE, "Subscribe", NULL, NULL, NULL, NULL);
^~~~
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/3282261449
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
4e7dfe20bb ("configs/friendlyarm_nanopi_m4:
remove defconfig") forgot to fully reflect the removal of the
defconfig in the DEVELOPERS file, causing a get-developers warning:
WARNING: 'board/friendlyarm/nanopi-m4' doesn't match any file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit ea38acd17d ("package/boost:
backport development branch changes to fix MIPS64 build failure")
introduced a patch formatting issue detected by check-package. This
commit fixes this issue.
Fixes:
package/boost/0001-Improve-modfunc-performance.patch:4: generate your patches with 'git format-patch -N'
https://gitlab.com/buildroot.org/buildroot/-/jobs/3287511158
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pass TARGET_LDFLAGS (which contains -static) to fix the following static
build failures with gpio, iio and pci:
LINK lsgpio
/home/autobuild/autobuild/instance-8/output-1/host/lib/gcc/arm-buildroot-linux-musleabi/10.4.0/../../../../arm-buildroot-linux-musleabi/bin/ld: /home/autobuild/autobuild/instance-8/output-1/host/lib/gcc/arm-buildroot-linux-musleabi/10.4.0/libgcc.a(_dvmd_lnx.o): in function `__aeabi_ldiv0':
/home/autobuild/autobuild/instance-8/output-1/build/host-gcc-final-10.4.0/build/arm-buildroot-linux-musleabi/libgcc/../../../libgcc/config/arm/lib1funcs.S:1499: undefined reference to `raise'
[...]
LINK iio_event_monitor
/home/thomas/autobuild/instance-2/output-1/host/lib/gcc/microblazeel-buildroot-linux-musl/11.3.0/../../../../microblazeel-buildroot-linux-musl/bin/ld: /home/thomas/autobuild/instance-2/output-1/host/lib/gcc/microblazeel-buildroot-linux-musl/11.3.0/libgcc.a(unwind-dw2.o): in function `size_of_encoded_value':
/home/thomas/autobuild/instance-2/output-1/build/host-gcc-final-11.3.0/build/microblazeel-buildroot-linux-musl/libgcc/../../../libgcc/unwind-pe.h:88: undefined reference to `abort'
Fixes:
- http://autobuild.buildroot.org/results/f202eb843ef331939f5f12325bdbf2d0d664a7ce
- http://autobuild.buildroot.org/results/504ec8be1ebd15c5da09f8b90bb723a58d4c58c5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure with popt and iconv raised since
bump to version 1.0.9 in commit 69015ce94a
and
122b58ad82
(which added an unified Makefile):
/home/autobuild/autobuild/instance-0/output-1/host/bin/mips64el-buildroot-linux-uclibc-g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o sgdisk.o gptcl.o -static -liconv -lpopt -o sgdisk
/home/autobuild/autobuild/instance-0/output-1/host/lib/gcc/mips64el-buildroot-linux-uclibc/11.3.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-0/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/lib64/../lib64/libpopt.a(poptint.o): in function `strdup_locale_from_utf8':
poptint.c:(.text+0x113c): undefined reference to `libiconv_open'
As can be seen above, this build failure is raised because -liconv is
added before -lpopt so use pkgconfig and SGDISK_LDLIBS
The addition of -liconv in LDLIBS could probably be removed in a
follow-up patch for next branch
Fixes:
- http://autobuild.buildroot.org/results/c9f2c9e737c2dd1cd4c1a08a5e8a48165179282d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Floating point exception (division-by-zero) flaw was found in Mupdf
for zero width pages in muraster.c. It is fixed in Mupdf-1.20.0-rc1
upstream.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without NEON probably raised since bump
to version 1.9.9-b1 in commit 1f7b12a0b4
and
ec02ecf104:
In file included from /home/autobuild/autobuild/instance-4/output-1/build/zlib-ng-2.0.6/arch/arm/adler32_neon.c:11:
/home/autobuild/autobuild/instance-4/output-1/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/include/arm_neon.h:31:2: error: #error "NEON intrinsics not available with the soft-float ABI. Please use -mfloat-abi=softfp or -mfloat-abi=hard"
31 | #error "NEON intrinsics not available with the soft-float ABI. Please use -mfloat-abi=softfp or -mfloat-abi=hard"
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/8260762632cde9eb5bc2154084680b5bec034aa6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following libressl build failure raised since bump to version
2.5.5 in commit 8f67d23af1 and
12c94a2980:
gensio_filter_certauth.c: In function 'v3_certauth_add_challenge_rsp':
gensio_filter_certauth.c:735:44: error: 'EVP_PKEY_ED25519' undeclared (first use in this function); did you mean 'EVP_PKEY_DSA1'?
735 | if (EVP_PKEY_base_id(sfilter->pkey) == EVP_PKEY_ED25519) {
| ^~~~~~~~~~~~~~~~
| EVP_PKEY_DSA1
Fixes:
- http://autobuild.buildroot.org/results/a0348df9bf9c7ccfd576f607abb6b186da384ad9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
socat's configure script does not take the zlib dependency into
account when linking with libssl, and therefore fails at detecting
libssl in BR2_STATIC_LIBS=y configurations.
Since there is no easy way to add the zlib dependency, just disable
openssl support for static builds.
This is not fixing a build failure: libssl was not detected in
BR2_STATIC_LIBS=y configurations, so what this commit does is make it
explicit.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
socal configure uses AC_TRY_RUN to detect printf features. This does
not work for cross compilation.
All C libraries we use support C99 snprintf. Only glibc and uClibc
support the deprecated Z modifier.
These issues were noticed by an inspection of configure.ac.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable documentation to avoid the following build failure without
makeinfo raised at least since bump to version 1.6.10 in commit
f0faa3b71c (and probably since the
addition of the package in commit
663f39c88c):
/home/buildroot/autobuild/instance-0/output-1/build/freeipmi-1.6.10/config/missing: line 81: makeinfo: command not found
WARNING: 'makeinfo' is missing on your system.
You should only need it if you modified a '.texi' file, or
any other file indirectly affecting the aspect of the manual.
You might want to install the Texinfo package:
<https://www.gnu.org/software/texinfo/>
The spurious makeinfo call might also be the consequence of
using a buggy 'make' (AIX, DU, IRIX), in which case you might
want to install GNU make:
<https://www.gnu.org/software/make/>
Makefile:442: recipe for target 'freeipmi-faq.info' failed
Fixes:
- http://autobuild.buildroot.org/results/ac6ff1c746a354f885fc1674d10e7bff9e536134
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with wolfssl raised since bump to
version 5.2.0 in commit 14e0c4de71 and
33cb823148:
/home/buildroot/autobuild/instance-0/output-1/build/libuhttpd-3.14.1/src/ssl/openssl.c: In function 'handle_wolfssl_asn_error':
/home/buildroot/autobuild/instance-0/output-1/build/libuhttpd-3.14.1/src/ssl/openssl.c:339:10: error: 'ASN_NTRU_KEY_E' undeclared (first use in this function); did you mean 'ASN_ECC_KEY_E'?
339 | case ASN_NTRU_KEY_E:
| ^~~~~~~~~~~~~~
| ASN_ECC_KEY_E
Fixes:
- http://autobuild.buildroot.org/results/3261b0035c8aadd1b62538b53e03af1cd8a7b312
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The main guile option depends on
BR2_PACKAGE_LIBATOMIC_OPS_ARCH_SUPPORTS, but this was not accounted
for in the Config.in comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following powerpc build failures on:
- musl raised because fpu_control.h is not available:
In file included from fp.c:8:
fp-gnuppc.c:21:10: fatal error: fpu_control.h: No such file or directory
21 | #include <fpu_control.h>
| ^~~~~~~~~~~~~~~
- glibc raised because _FPU_RC_NEAREST is undefined if _SOFT_FLOAT is
set:
In file included from fp.c:8:
fp-gnuppc.c: In function 'gsl_ieee_set_mode':
fp-gnuppc.c:53:15: error: '_FPU_RC_NEAREST' undeclared (first use in this function)
53 | mode |= _FPU_RC_NEAREST ;
| ^~~~~~~~~~~~~~~
These build failures are raised since the addition of the package in
commit 9d9f7feba4
Fixes:
- http://autobuild.buildroot.org/results/d73e116c81bf16d2e55fced215d6bd3b382fef10
- http://autobuild.buildroot.org/results/48403946bb4cda9013e51db59c1b2ffdcf4e2854
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix for possible buffer zeroization overrun introduced at the end of
v5.5.2 release cycle in GitHub pull request 5743 (#5743) and fixed in
pull request 5757 (#5757). In the case where a specific memory
allocation failed or a hardware fault happened there was the potential
for an overrun of 0’s when masking the buffer used for (D)TLS 1.2 and
lower operations. (D)TLS 1.3 only and crypto only users are not affected
by the issue. This is not related in any way to recent issues reported
in OpenSSL.
https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.3-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 0b4a993012 ("package/swupdate:
specify SWU_VER during build") forgot a backslash.
Fixes the following check-package warning:
package/swupdate/swupdate.mk:213: unexpected indent with tabs
and obviously makes the code correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
add host-python3 dependency to avoid the following build failure raised
since the addition of the package in commit
e43da7bb32:
(cd /home/autobuild/autobuild/instance-19/output-1/build/botan-2.19.2; PATH="/home/autobuild/autobuild/instance-19/output-1/host/bin:/home/autobuild/autobuild/instance-19/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" ./configure.py --cpu="m68k" --disable-cc-tests --os=linux --cc=gcc --cc-bin="/home/autobuild/autobuild/instance-19/output-1/host/bin/m68k-linux-g++" --prefix=/usr --without-documentation --extra-libs=atomic --disable-shared-library --enable-static-library --no-autoload --without-stack-protector --without-os-feature=getauxval --with-boost --with-sqlite --with-zlib --disable-altivec --disable-neon)
/usr/bin/env: 'python': No such file or directory
Fixes:
- http://autobuild.buildroot.org/results/91eb6d03ee899bc1034efc5ac7d1fe78961d37ca
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The swupdate build process uses SWU_VER as part of the build commandline
for compiling objects to define the value for use in globals.h (see also
Makefile.flags).
This value is also used to communicate capabilities to lua handlers
(see upstream 0f38ff186e76c55c8d00ccb53739a29bcca91445).
When swupdate gets built, SWU_VER defaults to using `git describe` to
determine the version. This, unfortunately, picks up the version of the
Buildroot checkout and not the actual version of swupdate.
Now, specify SWU_VER as part of the make options to override the
calculated value so the proper version is reported.
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting https://github.com/foo86/dcadec
"This program is deprecated!
This decoder has been fully integrated into FFmpeg master branch and
further development will continue there. Using FFmpeg for DTS decoding
is now recommended."
lbdcadec has had no commit oin the past 7+ years now.
Fixes:
http://autobuild.buildroot.net/results/1e63586c91a2670ecac2940f6e9840e6801c32f3/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: amend commit log with age of last activity]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The openssl configure script disables the afalg engine when it detects
cross-compilation, but the detection missfires because it is based on
the CROSS_COMPILE environment variable, which we do not set (as we pass
fully qualified CC et al.).
So, the afalg engine is built, but it is built for the host, not the
target, so it does not make sense to build and install it. Besides, it
leaks build host info.
Signed-off-by: Nuno Gonçalves <nunog@fr24.com>
[yann.morin.1998@free.fr: extend commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Sudo 1.8.0 through 1.9.12, with the crypt() password backend, contains a
plugins/sudoers/auth/passwd.c array-out-of-bounds error that can result
in a heap-based buffer over-read. This can be triggered by arbitrary
local users with access to Sudo by entering a password of seven
characters or fewer. The impact could vary depending on the compiler and
processor architecture.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit aaba432e2c (package/gawk: drop incorrect patch) was sent on the
list before e6942ad11f (package/gawk: fix double free during kernel
build) was applied. But when aaba432e2c was eventually applied, the
remaining patch was not renumbered.
Fix that now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We know the system will have a modern-enough C library that implements
the required snprintf() functionality. Since the configure stage can't
detect the system's capabilities (because it is cross-compiling), let's
hard-code the decision.
As a result, rsync won't be linking in its own copy of snprintf().
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8cd06967b9 (gawk: bump version and migrate to autotargets)
added a patch that purportedly reduced the installation size by not
installing the versioned program (gawk-X.Y).
However, the versioned program is a hard-link to the unversioned one,
so, save for a directory entry, it does not take extra space in the
final image.
Drop that patch.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back when support/testing/tests/package/test_gdb was introduced, there
was a significant difference in how gdb < 10 and gdb >= 10 were
handled in gdb.mk, which explained why we were testing both gdb 9.x
and gdb 11.x.
However, support for gdb 9.x has now been dropped, and we only support
gdb >= 10.x, so testing gdb 9.x and 11.x separately no longer make
much sense. In addition:
- other GDB tests in the same file already test the default version,
which is now 11.x, meaning we in fact have duplicated tests between
the ones testing the default version and the ones testing 11.x
specifically
- GDB 9.x has been removed, which means all the tests testing GDB 9.x
are failing, with a Config.in.legacy build error.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828456 (TestGdbHostOnly9x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828454 (TestGdbHostGdbserver9x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828451 (TestGdbHostGdbTarget9x)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CPIO filesystem generated by the test_python_crossbar test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828587
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2022-41974: Authorization bypass
- CVE-2022-41973: Symlink attack
For more details, see the writeup:
https://www.qualys.com/2022/10/24/leeloo-multipath/leeloo-multipath.txt
Update README.md hash after license-unrelated changes:
git shortlog 0.9.0..0.9.3 -- README.md
Konstantin Kharlamov (1):
README.md: mention libreadline and libedit optional deps
Xose Vazquez Perez (4):
multipath-tools: update devel repo info in README.md
multipath-tools: add ALUA info to README.md
multipath-tools: add basic info on how to use multipath-tools with NVMe devices
multipath-tools: add more info for NetApp RDAC arrays
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with libunistring raised since the
addition of the package in commit
ffb85a4a16:
/home/autobuild/autobuild/instance-2/output-1/per-package/libidn2/host/bin/../lib/gcc/aarch64-buildroot-linux-gnu/11.3.0/../../../../aarch64-buildroot-linux-gnu/bin/ld: warning: libunistring.so.2, needed by ../lib/.libs/libidn2.so, not found (try using -rpath or -rpath-link)
/home/autobuild/autobuild/instance-2/output-1/per-package/libidn2/host/bin/../lib/gcc/aarch64-buildroot-linux-gnu/11.3.0/../../../../aarch64-buildroot-linux-gnu/bin/ld: ../lib/.libs/libidn2.so: undefined reference to `u8_strconv_to_encoding'
[...]
aarch64-buildroot-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib'
Fixes:
- http://autobuild.buildroot.org/results/30ac50512cd4b4cb3ecc97514a72d1f316a1b33a
- http://autobuild.buildroot.org/results/c225ff4ef007b9a3ca56e6b601687aaa33699675
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The HELLO_ examples fail to run because the librevision.so
library build by the userland package is not included
in the image.
Include this library if BR2_PACKAGE_RPI_USERLAND_HELLO
is selected.
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump to version 2.0.16 in
commit e9bc980d93:
/nvmedata/autobuild/instance-7/output-1/per-package/numactl/host/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.4.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: ./.libs/libnuma.a(libnuma.o): in function `numa_police_memory':
libnuma.c:(.text+0xe28): undefined reference to `__atomic_fetch_and_1'
Fixes:
- http://autobuild.buildroot.org/results/a92c1c60518d3fe08f3f808f9cc812031e85a4e9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynqmp_zcu102 and zynqmp_zcu106 defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a private e-mail, Emile said "Hi Thomas. Please remove me from the
DEVELOPERS file. I am no longer interested in the packages under my
name."
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
since this are dependencies for building mkeficapsule u-boot tool.
Change the offset of the rootfs to left enough space for the U-Boot that
has increased.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We pass all our dracut configuration files via a config dir, but dracut
insists with having one config file. Because we do not want to have to
chose which file we pass (which would then have to be excluded from the
config dir), we just used an arbitrary empty file, and /dev/null seemed
to be a good candidate.
However, some build environments do not have a complete /dev, and may be
missing entries otherwise taken for granted, like /dev/null. This is
especially the case in constrained environments like containers.
Switch away from using /dev/null, and do create an actual empty file
that we can use as the dracut config file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828364
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker compose up outputs terminal control characters intended for
interactive output viewing.
Wget similarly can use the -q option to produce quieter logs.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
diff LICENCE:
-Copyright (C) 2013-2020 Gary V. Vaughan
+Copyright (C) 2013-2022 Gary V. Vaughan
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to an active fork:
"The original stress went unmaintained; the source of the last version,
1.0.4, was imported from Debian. After, patches from Debian and other
changes were applied to create the 1.0.5 release. The details of each
release are registered in the ChangeLog file. Now, stress is maintained
by volunteers under Resurrecting Open Source Projects."
https://github.com/resurrecting-open-source-projects/stress/blob/1.0.5/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit e6942ad11f (package/gawk: fix double free during kernel build)
backported an upstream patch, with hunks in autotools files, Makefile.am
and Makefile.in.
Such changes ususally require an explicitly autoreconf, but in this
case, Makefile.in is modified after Makefile,am, and a simple local test
did not trigger a silent autoreconf, so the patch was applied as-is.
That was a bit too optimitstic, though, and the build fails in some
situations.
Since the hunks in the autotools files are about tests, just drop those
hunks as we are not interested in running the tests.
Also drop the hunks about the changelogs while at it.
Fixes:
http://autobuild.buildroot.org/results/068/0686697cb52d22c42ae2249db3442c008082fe72/http://autobuild.buildroot.org/results/754/75463639cb9cbc32108f059bd6044810a078db06/
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add docopt.cpp library that can be used to create intuitive command
line interfaces with very little code by describing the valid calls
using the (POSIX.1-2017) command line utility argument syntax.
Signed-off-by: Eero Aaltonen <eero.aaltonen@vaisala.com>
Reviewed-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hostapd/wpa_s uses 'crc32' name for IEEE802.11 CRC-32 routine. This name
is too generic. Buildroot autobuilder detected configurations that failed
to build due to the naming conflict with zlib-ng.
Add wpa_supplicant part of the upstream patch that renames 'crc32'
function to a less generic 'ieee80211_crc32' name.
Fixes: http://autobuild.buildroot.net/results/ac19975f0bf77f4a8ca574c374092ba81cd5a332/
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hostapd uses 'crc32' name for IEEE802.11 CRC-32 routine. This name is
too generic. Buildroot autobuilder detected configurations that failed
to build due to the naming conflict with zlib-ng.
Add hostapd part of the upstream patch that renames 'crc32' function
to a less generic 'ieee80211_crc32' name.
Fixes: http://autobuild.buildroot.net/results/9901df820d3afa4cde78e8ad6d62cb8ce7e69fdb/
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the cmdline.txt file is installed in $(BINARIES_DIR) by the
rpi-firmware package. Overriding files in there can not be done with an
overlay (which only applies to $(TARGET_DIR)), and thus requires using
either a post-build or post-image script, which is not always very
practical when a custom file must be used.
Like was done in 689b9ac439 (package/rpi-firmware: rework boot/config
file handling) for config.txt, add an option to allow users to specify
the path to a custom cmdline.txt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Jetson AGX Orin python script to flash requires host python-pyyaml.
Add a Config.in.host option for the host python-pyyaml package.
BR2_PACKAGE_HOST_PYTHON_PYYAML
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build an AArch64 U-Boot based firmware implementing the
subset of UEFI defined by EBBR[1], as well as a Linux OS disk image booting
with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
We do not have Linux 5.19 headers at the moment therefore we rely on 5.17
in the defconfig.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a patch cherry-picked from upstream to fix the build with GCC 12.
Upstream commit is d1ca3f53c96dc8a4048b17dc16147a8fac782d4a.
I don't know if it fixes any autobuilder errors, I noticed the bug when
building locally.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The main option has a BR2_USE_MMU dependency, so the Config.in comment
should have it as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the output of `cargo vendor` to generate the vendor configuration.
Fixes the need to patch the generated configuration if there are
non-crates.io dependencies.
Note:
`cargo vendor` currently prints a newline before it prints the
needed configuration.
This is fixed in +nightly, will end up in +stable soon and must
be considered when updating cargo.
See: https://github.com/rust-lang/cargo/pull/11273
Until then it is needed to remove this first line to make sure
that the contents of .cargo/config will be the same as they were
generated with the earlier version of the script. Thus, the
hashes of the packages that use this script remain the same.
Signed-off-by: Simon Richter <simon.richter@ptwdosimetry.com>
[yann.morin.1998@free.fr: add comment in rust-bin.mk and rust.mk]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Backport an upstream patch to fix a crash during kernel build.
Details: https://bugs.gentoo.org/868567
Fixes:
GEN /home/buildroot/buildroot/output/build/linux-6.0.6/tools/objtool/arch/x86/lib/inat-tables.c
free(): double free detected in tcache 2
Aborted
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Summary of changes:
- skalibs dependency bumped to 2.12.0.0.
- execline dependency bumped to 2.9.0.0.
- s6 dependency bumped to 2.11.1.0.
- s6-rc-compile now reads service dependency information from the
dependencies.d directory and bundle information from the contents.d
directory, instead of the dependencies and contents flat files.
The old format is still supported, but deprecated.
License hash updated due to copyright year change.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
- skalibs dependency bumped to 2.12.0.0
- s6-dns dependency bumped to 2.3.5.4
- skalibs dependency bumped to 2.11.1.0
- execline optional dependency bumped to 2.8.2.0
- s6 dependency bumped to 2.11.0.1
- The obsolete minidentd program has been removed.
- LibreSSL optional dependency bumped to 3.3.4
- LibreTLS optional dependency bumped to 3.3.4
- Client certificates are now properly supported in s6-tlsd-io.
License hash updated due to copyright year change.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
- skalibs dependency bumped to 2.12.0.0.
- s6-fillurandompool has been replaced with the new rngseed program.
License hash updated due to copyright year change.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
- execline optional dependency bumped to 2.9.0.1.
- skalibs dependency bumped to 2.12.0.0.
- nsss optional dependency bumped to 0.2.0.1.
- s6-svwait now supports the -r and -R options, to wait for service restarts.
- The s6/lock.h, s6/supervise.h and s6/fdholder.h headers replace their
previous versions that had an extra s6 prefix.
- New binaries: s6-svlink, s6-svunlink, and s6-socklog.
License hash updated due to copyright year change.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
- skalibs dependency bumped to 2.12.0.0.
- New options to wait: -o to wait for one of the listed processes,
and -a to get the default behaviour.
- wait now exits 99 on timeout.
License hash updated due to copyright year change.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
- skalibs dependency bumped to 2.12.0.1.
- execline optional dependency bumped to 2.9.0.1.
- New -O nlgroups option to mdevd, rebroadcasting uevents to the netlink
after handling them.
- The * and & action directives are now triggered by all action types.
License hash updated due to copyright year change.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Summary of changes:
New:
- New djbunix functions: waitn_posix(), waitn_reap_posix()
- New unix-transactional.h function: opendir_at.
- New skalibs/posixplz.h function: munmap_void().
- random functions now have an early version, to use when randomness is
required before the generator can be seeded (i.e. in programs running in
the very early boot).
- envdir_internal() now has a SKALIBS_ENVDIR_NOCLAMP option allowing
reading of unlimited-size variables.
- fd_close() now chooses to adapt to Linux's close() behaviour (closing
the fd on EINTR) over the HP-UX one (not closing it). Destructors like
close() being allowed to fail has always been a mistake in the
specification and a programming nightmare, making it impossible to
behave correctly on all systems, but apparently standardization efforts
are on the way and the Linux behaviour seems to be the chosen one.
Removed:
- libbiguint removed.
- Obsolete skalibs/environ.h and skalibs/getpeereid.h headers removed.
- rc4 and md5 functions removed.
- iobuffer removed. fd_cat() and fd_catn() changed signatures.
- All signal functions entirely reworked; cruft removed.
- The unsafe cdb_successor() API has been removed.
- random_init() and random_finish() removed, as well as random_char().
Renamed APIs and type:
- random_string() renamed to random_buf().
- All *_t types renamed without the _t suffix, to preserve POSIX namespace.
- subgetopt() renamed to lgetopt().
- skalibs/cdb_make.h renamed to skalibs/cdbmake.h;
cdbmake functions now return 1 on success and 0 on failure.
- skalibs/cdb.h redesigned to remove reader state from the cdb structure.
License hash updated due to copyright year change.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a patch for CVE-2022-31676 (local privilege escalation
vulnerability).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 6f5f6bc dbus is selected when iwd is selected.
It is only a runtime dependency, so drop the build
dependency.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix memory leak cause by getaddrinfo
- Fix crash when last block actual size < m_output_size
- Add -dm to disable small memory for debug purpose
- Fix a dead lock when reset stream
- Stop http download when error happen
- Add error check for all request_data
- Fix linux build warning
- Add gzip stream support
- Rework buffer management to support small memory version
- Fix support of empty environment variables in Windows OS
- Fix crash when environment variable is last word in script
- Fix update libusb path
- Update libusb submodule
- Drop vs2017 support.
- Use $(DefaultPlatformToolset)
- Try remove PlatformToolset and set WindowsTargetPlatformVersion to 10.0
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The musl Makefile installs the dynamic loader as a symlink to libc.so
with the following rule:
$(DESTDIR)$(LDSO_PATHNAME): $(DESTDIR)$(libdir)/libc.so
$(INSTALL) -D -l $(libdir)/libc.so $@ || true
While it works, the drawback is that ld-musl-<arch>.so ends up being a
symlink to /lib/libc.so. While it works on the target, it means we
have a broken symlink in $(STAGING_DIR) and $(TARGET_DIR) as
/lib/libc.so doesn't make sense on the build machine. This generally
doesn't cause any problem *except* when we tell Qemu to use
$(STAGING_DIR) as the library directory when running target programs
through the Qemu user emulation mode. This is for example node inside
the NodeJS build. Due to this broken symlink, Qemu can't find libc.so
that is pointed to be the dynamic loader symlink causing this build
error:
qemu-arm: Could not open '/lib/ld-musl-armhf.so.1': No such file or directory
Since this is not really a bug in the musl build system, we address
this issue by overriding the symlink to be a relative path. The
dynamic loader is always installed in /lib, and libc.so is also always
installed in /lib because we pass libdir=/lib when configuring
musl. So we can simply have a ld-musl* -> libc.so symbolic link. We
use ld-musl* as a wildcard so that we don't need to have extra logic
to determine the exact name of the dynamic loader symlink, and simply
override the one that exists.
Fixes:
http://autobuild.buildroot.net/results/9ff23f2e3c97e9af410617de3e7376f9d45a7d63/https://bugs.busybox.net/show_bug.cgi?id=15061
Note that, for external toolchain, we already have a generic fixup that
makes symlinks relative [0]. So in the external toolchain, even if the
symlink is broken, it gets fixed when we import the toolchain into
STAGING_DIR.
[0] https://lore.kernel.org/buildroot/20221026205312.3f729eb8@windsurf/
Cc: hello.skyclo@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add summary of Thomas' explanations for external toolchains
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for the AVX512FP16 instructions was added in binutils
2.38. See the binutils 2.38 releases notes [0] that state:
X86:
[...]
* Add support for Intel AVX512_FP16 instructions.
[0] https://sourceware.org/pipermail/binutils/2022-February/119721.html
It turns out that when building GCC 12.x, some of these AVX512FP16
instructions are now used, and therefore when binutils < 2.38 is used,
the build fails as the assembler does not recognize those
instructions:
/tmp/ccChzL2g.s: Assembler messages:
/tmp/ccChzL2g.s:20: Error: no such instruction: `vmovw 24(%esp),%xmm2'
/tmp/ccChzL2g.s:21: Error: no such instruction: `vmovw 28(%esp),%xmm3'
/tmp/ccChzL2g.s:22: Error: no such instruction: `vmovw 32(%esp),%xmm4'
/tmp/ccChzL2g.s:23: Error: no such instruction: `vmovw 36(%esp),%xmm5'
/tmp/ccChzL2g.s:30: Error: no such instruction: `vcvtsh2ss %xmm2,%xmm6,%xmm6'
/tmp/ccChzL2g.s:36: Error: no such instruction: `vcvtsh2ss %xmm3,%xmm6,%xmm6'
/tmp/ccChzL2g.s:42: Error: no such instruction: `vcvtsh2ss %xmm4,%xmm7,%xmm7'
/tmp/ccChzL2g.s:48: Error: no such instruction: `vcvtsh2ss %xmm5,%xmm1,%xmm1'
/tmp/ccChzL2g.s:80: Error: no such instruction: `vcvtss2sh (%esp),%xmm1,%xmm1'
/tmp/ccChzL2g.s:96: Error: no such instruction: `vcvtss2sh (%esp),%xmm0,%xmm0'
/tmp/ccChzL2g.s💯 Error: no such instruction: `vucomish %xmm1,%xmm1'
/tmp/ccChzL2g.s:103: Error: no such instruction: `vucomish %xmm0,%xmm0'
/tmp/ccChzL2g.s:122: Error: no such instruction: `vucomish %xmm2,%xmm2'
The same issue does not occur with GCC 11.x, but nothing prevents
other packages than GCC to use those instructions, so the problem
really lies on the binutils side missing the support for those
instructions.
Also, in Buildroot, we do not distinguish AVX512 in general from
AVX512FP16 specifically, so our only option is to make binutils 2.37
unavailable for AVX512 systems even if some of them perhaps don't
support AVX512FP16 anyway. This seems like a reasonable trade-off, as
binutils 2.38 is anyway already the default in Buildroot, and
AVX512-capable systems are fairly recent, and therefore using a recent
binutils version should not be a problem on these platforms.
Fixes:
http://autobuild.buildroot.net/results/eb6e28c934654e6d714973415a2fb452f9580279/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
tinycompress is a library for compress audio offload in alsa.
It also contains the "cplay" and "crecord" programs.
tinycompress is part of the ALSA project.
https://www.alsa-project.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The license in file README.QUICK remains unchanged, but for the
copyright years, some C++ instructions changes, iand a few small
typos/fixes.
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
[yann.morin.1998@free.fr: mention copyright years change]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Force cmake packages to use the "Unix Makefiles" generator
in case CMAKE_GENERATOR is set in the host environment. This
patch further isolates the buildroot build environment from
the host.
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to now supported system double-conversion library.
Disable built in strip so that stripping is handled by buildroot.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with kernel >= 5.18 raised since bump to
version 3.2.0 in commit 6cbfed0dbf:
/home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ‘t4_allocate_buffers’:
/home/autobuild/autobuild/instance-0/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:3864:17: error: implicit declaration of function ‘pci_alloc_consistent’ [-Werror=implicit-function-declaration]
3864 | alloc = pci_alloc_consistent(wc->dev, numbufs * T4_BASE_SIZE(wc) * 2,
| ^~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/ddacd807dddeb1649e957264ac57bba27d9bb463
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since glibc 2.33 (upstream commit
7a55dd3fb6d2c307a002a16776be84310b9c8989), headers >= 5.4.0 are needed
to build glibc for RISC-V 32-bit. Indeed
sysdeps/unix/sysv/linux/riscv/configure.ac contains:
if test $libc_cv_riscv_int_abi = ilp32; then
arch_minimum_kernel=5.4.0
fi
In order to take into account this dependency, we add the appropriate
logic in package/glibc/Config.in and
toolchain/toolchain-buildroot/Config.in.
This change means that if headers < 5.4.0 are selected, then no C
library at all will be available for RISC-V 32-bit, as glibc is the
only C library supporting RISC-V 32-bit currently. However, thanks to
the recent addition of BR2_TOOLCHAIN_BUILDROOT_NONE, the
choice...endchoice for the C library selection will not be empty,
allowing the user to see the Config.in comment explaining why glibc
can't be selected.
Therefore, technically this commit does prevent from creating a
configuration with RISC-V 32-bit and headers < 5.4.0, but it will have
BR2_TOOLCHAIN_BUILDROOT_NONE=y, which is catched by
package/Makefile.in, which aborts the build early on pointing out that
the configuration is invalid.
Fixes:
http://autobuild.buildroot.net/results/5ca49b2732f68eccb5276e7112f7f496dcc514ee/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In the internal toolchain backend, we have a choice..endchoice block
to allow the user to select the C library, between glibc, uClibc and
musl.
However, there are situations were no C library at all is
supported. In this case, the choice does not appear, and does not
allow to see the Config.in comments that are within the
choice..endchoice block and that may explain why no C library is
available.
For example, on RISC-V 32-bit, the only C library supported is glibc,
and the minimum kernel header version required by glibc on this
architecture is 5.4.0. In a future commit, we are going to add this
dependency on glibc (to fix build issues on configurations that have
headers < 5.4.0). But since glibc is the only supported C library on
RISC-V 32-bit, it means that the choice..endchoice for the C library
contains no entry, preventing from seeing the Config.in comment.
To address this issue, this commit adds a "dummy"
BR2_TOOLCHAIN_BUILDROOT_NONE option that shows up in the
choice..endchoice only when no C library is available. Thanks to this,
the choice..endchoice is never empty, and the Config.in comments can
be seen.
If the user keeps BR2_TOOLCHAIN_BUILDROOT_NONE selected, then the
build will anyway abort early because package/Makefile.in has a check
to verify that a C library is selected, and aborts the build if not.
Some could say that the problem should be resolved by instead
preventing the selection of headers < 5.4.0 on RISC-V 32-bit, but that
is difficult to do as the user can choose a custom header version, or
simply specific that (s)he wants to use the headers of the kernel
being built. In those situations, it's difficult to prevent selecting
headers < 5.4.0.
Prevent random configurations from triggering a build failure in our
autobuilders, by excluding that symbol from accepted configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update genrandconfig]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The build of NodeJS fails on mipsel due to an issue in the V8 code:
../../deps/v8/src/compiler/backend/mips/code-generator-mips.cc:4106:48: error: call of overloaded 'Operand(int64_t)' is ambiguous
4106 | Operand(static_cast<int64_t>(0)));
There is apparently a lack of maintenance of the MIPS port of V8, as
is discussed in the Github issue at
https://github.com/nodejs/node/issues/26179.
Until this get improved/fixed, our best option is to drop support for
MIPS in our NodeJS package.
Fixes:
http://autobuild.buildroot.net/results/0e6ee80c77bcb77afe18410e8d9da93b738cb0a4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For a very long time, host-sentry-cli has been failing to build with:
error[E0512]: cannot transmute between types of different sizes, or dependently-sized types
--> /home/buildroot/autobuild/instance-2/output-1/build/host-sentry-cli-1.59.0/VENDOR/socket2/src/sockaddr.rs:176:9
|
176 | mem::transmute::<SocketAddrV4, sockaddr_in>(v4);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: source type: `SocketAddrV4` (48 bits)
= note: target type: `sockaddr_in` (128 bits)
For more information about this error, try `rustc --explain E0512`.
error: could not compile `socket2` due to previous error
This socket2 create issue has apparently been fixed by upstream commit
fd1565af4a,
as it removes/reworks the problematic code. This commit has been part
of socket2 since the 0.3.3 version, but sentry-cli 1.59.0 uses socket2
in version 0.3.2.
The next version of sentry-cli that has moved to a more recent
version of socket2 is 1.61.0, however this one also fails to build
with:
Compiling sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0)
warning: fields `schemes` and `name` are never read
--> src/utils/xcode.rs:41:5
|
39 | pub struct XcodeProjectInfo {
| ---------------- fields in this struct
40 | targets: Vec<String>,
41 | schemes: Vec<String>,
| ^^^^^^^
42 | configurations: Vec<String>,
43 | name: String,
| ^^^^
|
= note: `#[warn(dead_code)]` on by default
= note: `XcodeProjectInfo` has a derived impl for the trait `Debug`, but this is intentionally ignored during dead code analysis
warning: `sentry-cli` (bin "sentry-cli") generated 1 warning
Finished release [optimized] target(s) in 55.05s
Installing /home/buildroot/buildroot/output/host/bin/sentry-cli
Installed package `sentry-cli v1.61.0 (/home/buildroot/buildroot/output/build/host-sentry-cli-1.61.0)` (executable `sentry-cli`)
So we just gave up, and went for building the very lastest sentry-cli
version, 2.8.0, which apparently builds fine, at least in the
configurations that used to previously fail.
Yes, such a huge version bump is probably not ideal as a "minimal fix"
to backport on our stable branches, but that's probably the best we
can do without investing too much effort into this package that is
otherwise poorly maintained in Buildroot, as nobody stepped up to
address the issue even though it has been failing for months.
Fixes:
http://autobuild.buildroot.net/results/883b83a5ee44206e0d67a30787bf5d60765ac1e4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure raised since bump to version
1.9.4 in commit 1f54af8c4f:
compiling dynamic library 1.9.4
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/crt1.o: in function `_start':
(.text+0x1c): undefined reference to `main'
Fixes:
- http://autobuild.buildroot.org/results/9187852fb7a869bf5595275d47929632659a4407
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add Kconfig options to allow enabling asymmetric cipher support
(--enable-lib-asym) and key protocol primitives support
(--enable-lib-kpp) in library.
Signed-off-by: Tan En De <ende.tan@linux.starfivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Use official tarball
- This bump will fix the following build failures with kernel >= 5.16:
/home/autobuild/autobuild/instance-6/output-1/build/dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/wct4xxp/base.c:45:10: fatal error: stdbool.h: No such file or directory
45 | #include <stdbool.h>
| ^~~~~~~~~~~
[...]
../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c: In function ‘xbus_read_proc_open’:
../dahdi-linux-5c840cf43838e0690873e73409491c392333b3b8/drivers/dahdi/xpp/xbus-core.c:1845:43: error: implicit declaration of function ‘PDE_DATA’; did you mean ‘NODE_DATA’? [-Werror=implicit-function-declaration]
1845 | return single_open(file, xbus_proc_show, PDE_DATA(inode));
| ^~~~~~~~
| NODE_DATA
5c840cf438...v3.2.0
Fixes:
- http://autobuild.buildroot.org/results/3f23559f01a7783d82ad4e0b2d6792171e6f2b79
- http://autobuild.buildroot.org/results/f3f226fb661a6b1998381f5fb7cb306771c2ecc0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the case that the WOLFSSL_CALLBACKS macro is set when building
wolfSSL, there is a potential heap over read of 5 bytes when handling
TLS 1.3 client connections. This heap over read is limited to wolfSSL
builds explicitly setting the macro WOLFSSL_CALLBACKS, the feature does
not get turned on by any other build options. The macro
WOLFSSL_CALLBACKS is intended for debug use only, but if having it
enabled in production, users are recommended to disable
WOLFSSL_CALLBACKS. Users enabling WOLFSSL_CALLBACKS are recommended to
update their version of wolfSSL. CVE 2022-42905
https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LZ4 v1.9.4 is a maintenance release, featuring a substantial amount
(~350 commits) of minor fixes and improvements, making it a recommended
upgrade. The stable portion of liblz4 API is unmodified, making this
release a drop-in replacement for existing features.
- Drop patch (already in version)
- Update hash of lib/LICENSE (update in year with
87a80acbe7)
https://github.com/lz4/lz4/releases/tag/v1.9.4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate to setuptools infrastructure.
Add new host-python-packaging dependency.
Refresh zmq version override patch.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SSP support requires support in ATF platform code. Not all platforms
implement plat_get_stack_protector_canary() hook. The result is build
failure:
(.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary'
Commit cf176128ec ("boot/arm-trusted-firmware: add SSP option")
originally introduces this issue. But then commit ccac9a5bbb
("boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR") hid
the problem by effectively disabling SSP for all platforms. So only
after commit 09acc7cbc9 ("boot/arm-trusted-firmware: fix SSP
support") the issue showed up.
Make SSP an opt-in for platform that actually provide the
plat_get_stack_protector_canary() hook.
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Cc: Dick Olsson <hi@senzilla.io>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
add leap-seconds.list to installed files so it can be used by other packages
specifically, ntpd's ntp.conf can now include:
leapfile /usr/share/zoneinfo/leap-seconds.list
Signed-off-by: David Johnson <dave-git@centerclick.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 7.85.0 fixes CVE-2022-35252: When curl retrieves and parses
cookies from an HTTP(S) server, it accepts cookies using control codes
(byte values below 32). When cookies that contain such control codes are
later sent back to an HTTP(S) server, it might make the server return a
400 response. Effectively allowing a "sister site" to deny service to
siblings.
Drop upstream patches and autoreconf.
Cc: Matt Weber <matthew.weber@collins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We want to show the headers >= 5.1 Config.in comment when the
BR2_LINUX_KERNEL is satisfied, not when it isn't.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mdio-tools are kernel module and accompanying tools for low-level
debugging of devices attached on MDIO bus like PHY-s, switches etc.
Userspace tools provide C22 or C45 reads and writes, benchmarking
and even dedicated Marvell Link Street tools via the included
kernel module.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A double-free condition exists in contrib/shpsort.c of shapelib 1.5.0
and older releases. This issue may allow an attacker to cause a denial
of service or have other unspecified impact via control over malloc.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set ac_cv_prog_A2X to disable build of documentation and avoid the
following build failure without a working a2x raised since at least bump
to version 1.1.1 in commit ad21d84a58:
a2x -v -f manpage doc/man/usbguard.1.adoc -D ./$(dirname doc/man/usbguard.1.roff)
a2x -v -f manpage doc/man/usbguard-dbus.8.adoc -D ./$(dirname doc/man/usbguard-dbus.8.roff)
/nvmedata/autobuild/instance-5/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc')
Fixes:
- http://autobuild.buildroot.org/results/e41950f3cd4bd83d9b067af498757cb9d2f207ef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The libbpf build system currently uses the output of "uname -m" to
determine if the library should be installed in "lib" or
"lib64". However, uname -m returns the architecture of the build
machine, which often has nothing to do with the target CPU
architecture.
A patch has been submitted and accepted upstream to address this
issue, by using the $(CC) -dumpmachine output instead. This ensures
libbpf is installed in either "lib" or "lib64" depending on the
bitness of the target CPU architecture.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Buildroot commit 3145adfb69 ("package/libbpf: needs headers >=
4.13"), libbpf depends on Linux headers >= 4.13. This requirement
renders the explicit list of supported architectures, previously added
in f693354c30 overly restrictive, as the syscall number for bpf(2)
has been defined since Linux 3.18.
Commit f693354c30 ("package/libbpf: add
BR2_PACKAGE_LIBBPF_ARCH_SUPPORTS") was introduced to fix a build issue
where a toolchain using very old kernel headers (3.13) failed to build
libbpf for ARM, but these architecture dependencies are no longer
needed due to the bump on the kernel headers version requirement.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit backports the patch "fixinc: don't "fix" machine names in
__has_include(...)" from upstream GCC, which is needed to resolve a
header conflict between glibc headers and kernel headers, which has
appeared since we bumped glibc to version 2.36 in commit
80c8c15c85.
The problem comes from the "fixinc" logic used by gcc to fixup some
headers files, generated inside an include-fixed/ folder. This logic
ended up replacing "linux/mount.h" by "__linux__/mount.h" in
__has_include() invocation, like this:
#ifdef __has_include
# if __has_include ("__linux__/mount.h")
# include "linux/mount.h"
# endif
#endif
in
build/host-gcc-final-11.3.0/build/gcc/include-fixed/sys/mount.h. With
this fix in place, this "include-fixed" header is no longer generated,
avoiding the problem.
This issue was visible in two different ways in glibc configurations:
- As a build failure during the gcc build itself, for architectures
that support libsanitizer, as libsanitizer includes mount.h, and
would therefore encounter the header conflict.
- As a build failure during another user-space package (such as
sysvinit for example), on architectures when libsanitizer isn't
used, and therefore for which the gcc build was successful, but the
header conflict shows up when building some "random" user-space
package.
The problem is already fixed in GCC 12.2.0, so no patch is
required. The problem did not exist back in GCC 8.4.0, so this version
does not need patching. Consequently, the patch is only needed for GCC
10.4.0, GCC 11.3.0 and the special ARC 2020.09-release version.
Fixes:
(gcc build issue, on architecture that supports libsanitizer)
http://autobuild.buildroot.net/results/90fe4c3b8b72a2c28555674383de9bbd9e8ae09a/
(sysvinit build issue, on architecture that does not support libsanitizer)
http://autobuild.buildroot.net/results/d7bf5795b7621a92be32f18794e3e67944fb96db/
(crun)
http://autobuild.buildroot.net/results/e3e8da4f797dced48aedf8c636db983d36849850/
(libarchive)
http://autobuild.buildroot.net/results/9fcbf0c036a97b2e9a4fcc6e173bcfa09e1b3dac/
Thanks a lot to Peter Seiderer for pointing the relevant GCC commit.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=15021
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2022-38784: Poppler prior to and including 22.08.0 contains an
integer overflow in the JBIG2 decoder
(JBIG2Stream::readTextRegionSeg() in JBIGStream.cc). Processing a
specially crafted PDF file or JBIG2 image could lead to a crash or the
execution of arbitrary code. This is similar to the vulnerability
described by CVE-2022-38171 in Xpdf.
- Drop patch (already in version)
https://gitlab.freedesktop.org/poppler/poppler/-/blob/poppler-22.10.0/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch from upstream pull request to fix build with python 3.11.
Fixes:
python/enum.c: In function ‘enumitem_new’:
python/enum.c:55:25: error: lvalue required as left operand of assignment
55 | Py_SIZE(&self->val) = Py_SIZE(longval);
| ^
python/enum.c: In function ‘zbarEnumItem_New’:
python/enum.c:146:25: error: lvalue required as left operand of assignment
146 | Py_SIZE(&self->val) = Py_SIZE(longval);
| ^
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add host-python-cython so that cython will generate python 3.11
compatible sources instead of using the python 3.11 incompatible
pre-built sources.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure file is a shell script which searches for a predefined
python binary and then calls configure.py with that.
As we already call configure with the desired python binary we should
call configure.py directly so that the expected python binary is used
and so that the shell wrapper doesn't throw spurious interpreter
validation errors.
This also avoid spurious errors due to the configure shell wrapper
missing supported python versions, for example this fixes:
Node.js configure: Found Python 3.11.0...
Please use python3.10 or python3.9 or python3.8 or python3.7 or python3.6.
/usr/bin/python3.10 ./configure
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.org/results/3a8/3a8b66027cde3cdd9d02745381526d52bb626a78/
Bootgen embeds an old version of flex, but uses the system include syntax
(#include <>) to reference it, causing conflicts on systems with the
development headers for a modern flex version installed, leading to build
issues like:
../bisonflex/bif.yy.cpp: In member function 'virtual int BIF::FlexScanner::yylex()':
../bisonflex/bif.yy.cpp:1608:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream<char>'} and 'std::istream*' {aka 'std::basic_istream<char>*'})
Fix it by using normal local #include statements by:
sed -i 's/<FlexLexer.h>/"FlexLexer.h"/g' *
Patch submitted upstream: https://github.com/Xilinx/bootgen/pull/20
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2.1.8 (as of August 5th, 2022)
------------------------------
- Add support for --bounceback to perform a repsonsiveness test (see man
page for other options)
- add support for working loads with --bounceback
- Fix to wait_tick with Mac OS X
- Various python pyflows commits
- add support for client side tcp-write-time histograms and mean/min/max
- add support for human readable dscp or -T values (see man page)
- udp_accept no longer accepts packets from a previous run as a new
connection, this can occur with long network delays
- multiple isoch bug fixes for both UDP and TCP
- isoch server provides mean/min/max/stdev for both frames and packets
- UDP max MTU discovery, requires configure.ac will support
--enable-discover-defaultlen prior to compile
- Drop first patch (already in version)
- Drop second patch (not needed since
de5cb99546)
https://sourceforge.net/projects/iperf2/files/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 1.6.38 [September 14, 2022]
Added configurations and scripts for continuous integration.
Fixed various errors in the handling of tRNS, hIST and eXIf.
Implemented many stability improvements across all platforms.
Updated the internal documentation.
Update hash of LICENSE file (update in year with
723b2d9f2e)
https://sourceforge.net/p/libpng/code/ci/v1.6.38/tree/CHANGES
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 5.0.1 - 8/2/2022
- On very low speed transfers (<10Kbps) sessions would time out due to
a very large interpacket transmission interval. Fixed by putting a
lower limit on the advertised GRTT of of the interpacket transmission
interval.
- Sending of ABORT messages on early shutdown would sometimes fail due
to OpenSSL cleanup functions running before application cleanup.
Changed the ordering of atexit() handlers to ensure OpenSSL cleanup
happens last.
- Fixed missing timestamp update when clients read CONG_CTRL messages
- Fix to GRTT handling on server to ensure it doesn't fall below minumim.
- Fixed bypassed checking of existing files on client for backup
- Various logging fixes
https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds Xilinx bootgen as a host package to buildroot.
bootgen is a required utility for generating a boot.bin for
Xilinx versal products.
In addition, for developers who wish to use secure boot with
Xilinx SoC products such as zynq and zynqmp, bootgen has a
more complete offering in secure boot features than the u-boot
mkimage utility.
https://github.com/Xilinx/bootgen
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Startig with glibc 2.34, the gconv modules description has been split in
two:
- a common definition in the old location, /usr/lib/gconv/gconv-modules
- specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/
This is done so as to simplify the handling of glibc gconv modules, and
eventually to segregate those outside of glibc, and so that third-parties
may also provide their own gconv converters and their definitions.
And starting with that same glibc version, most of the gconv modules
definitions are moved to an extra configuration file in that
sub-directory.
It is thus no longer possible to use special code pages, like cp850,
which are very useful to access FAT-formatted devices.
Add support for this new gconv layout, while keeping support for older
glibc versions. Note that the modules themselves are not moved or
renamed, just the definition files have changed.
Instead of passing the one old gonv modules definitions file on stdin,
we pass the base directory to that file, and move into the script the
responsibility to find all the gconv definition files.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When only a subset of the glibc gconv modules are installed, we need to
generate a trimmed-down list of available modules. We currently use gawk
for that.
However, we are not using any GNU extension in that awk script, and it
happens to work as expected when using mawk (which has no GNU
extension).
Commit 11c1076db9 (toolchain: add option to copy the gconv libraries)
did not explain why it used gawk explicitly, and given the age for that
commit, we doubt we'd be able to have the involved participants recall
anything from that period...
Besides, gawk is not a requirement for Buildroot.
Switch over to using plain awk.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
To generate the glibc locale data, we call into a recursive Makefile,
so as to generate locales in parallel. This is done as part of a
target-finalize hook.
However, that hook is registered after all packages have been parsed,
and as such, it maye be registered after hooks defined in packages.
Furthermore, the expansion of target-finalize hooks is done in a recipe,
so it is not easy to understand whether this generates a "simple" rule
or not.
As a consequence, despite the use of $(MAKE), make may not notice that
the command is a recursive call, and will decide to close the jobserver
file-descriptors, yielding warnings like:
make[2]: warning: jobserver unavailable: using -j1. Add '+' to
parent make rule.
This causes the lcoale data to not be generated in parallel, which is
initially all the fuss about using a sub-makefile...
So, do as suggested, and prepend the hook with a '+', so that it is
explicit to make that it should not close its jobserver fds.
Fixes: 6fbdf51596 (Makefile: Parallelize glibc locale generation)
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We use gpsd's upstream systemd service unit files, which define a
dependency on chronyd.service. And indeed, upstream chrony does
provide an example service unit file chronyd.service.
However, in Buildroot, we are not using chrony's upstream unit, we are
providing our own, much simplified as compared to upstream. We install
that unit file as chrony.service. Notice that subtle difference in the
name: upstream's is chronyd, with a trailing 'd', while ours just
chrony, without the trailing 'd'.
As a consequence, in a Buildroot-built system, gpsd does not wait for
after chrony is started, which causes all kind of mayhem when gpsd
actually needs to talk to chrony.
We have multiple options:
1. use chrony's upstream unit file;
2 rename the chrony service file as installed by Buildroot, to match
what chrony would actually do;
3. tweak gpsd's unit file to refer to chrony.service, not
chronyd.service;
4. leverage systemd's flexibility in how units are defined, and provide
a drop-in to complement gpsd's unit to also wait for chrony.service.
For 1. it is totally unknown why we do have our unit file to begin with,
rather than use upstream's. Since upstream's is much more complex than
ours, using it might have unforetold consequences.
Going with 2. seems the easiest at first sight, but then it would break
systems where users provide their own drop-ins for chrony, as they would
no longer match.
3. is relatively easy, but running sed is not entirely nice. Besides, it
semantically should be a post-install hook, rather than a systemd-init
command, but again that makes things a bit more ugly. Also, some people
may have their own gpsd.service in an overlay or whatever, which would
break our fixup.
Solution 4. is pretty straightforward, although it is not ideal either.
To be noted: some distributions, like Ubuntu 20.04 at least, do install
the chrony unit file as chrony.service, like Buildroot does. However,
there does not appear to be any fixup in gpsd for this discrepancy, as
their gpsd install still refers to chronyd.service. So that does not
help us decide what to do.
So, eventually, we decided to go with solution 4, which has the least
impact on the system, and keeps the status-quo for all other use-cases.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since gpsd-3.22, the systemd service files no longer contain hard-coded
paths to /usr/local/, but use @SBINDIR@ which is replaced appropriately
at build time, and contains the correct path.
Drop the legacy fixup now.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2022-40674: bundled libexpat was upgraded from 2.4.7 to 2.4.9 which
fixes a heap use-after-free vulnerability in function doContent
- gh-97616: a fix for a possible buffer overflow in list *= int
- gh-97612: a fix for possible shell injection in the example script
get-remote-certificate.py(this issue originally had a CVE assigned to it,
which its author withdrew)
- gh-96577: a fix for a potential buffer overrun in msilib
License hash changed due to links in license text being changed from
http to https:
96f8d3619d
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: mark as security bump]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bump from 9.0p1 to 9.1p1 in commit
bb571dc3e8 forgot to update the hash of
the license file. The license file change (detailed below) does not
change the license terms of OpenSSH:
--- output/build/openssh-9.0p1/LICENCE 2022-04-06 02:47:48.000000000 +0200
+++ output/build/openssh-9.1p1/LICENCE 2022-10-03 16:51:42.000000000 +0200
@@ -231,6 +231,7 @@
Eric P. Allman
The Regents of the University of California
Constantin S. Svintsoff
+ Kungliga Tekniska Högskolan
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
Fixes:
http://autobuild.buildroot.net/results/697cdcea128c3716c9ae81be6c97937ebd80a5da/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release of Docker Engine comes with some bug-fixes, and an updated version
of Docker Compose.
Builder
Fix an issue that could result in a panic during docker builder prune or
docker system prune moby/moby#44122.
Daemon
Fix a bug where using docker volume prune would remove volumes that were
still in use if the daemon was running with "live restore" and was restarted
moby/moby#44238.
Packaging
Update Docker Compose to v2.11.2.
https://github.com/moby/moby/releases/tag/v20.10.19
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This release of Docker Engine comes with some bug-fixes, and an updated version
of Docker Compose.
Builder
Fix an issue that could result in a panic during docker builder prune or
docker system prune moby/moby#44122.
Daemon
Fix a bug where using docker volume prune would remove volumes that were
still in use if the daemon was running with "live restore" and was restarted
moby/moby#44238.
Packaging
Update Docker Compose to v2.11.2.
https://github.com/moby/moby/releases/tag/v20.10.19
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-41550: GNU oSIP v5.3.0 was discovered to contain an integer
overflow via the component osip_body_parse_header.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://github.com/signalwire/freeswitch/releases/tag/v1.10.8
Removed two patches which are included in upstream release,
renumbered remaining patch.
Removed libs/apr-util/LICENSE due to upstream removal of bundled
apr-util package.
Added fix to disable pcap detection, otherwise /usr/bin/pcap-config
can be picked-up which breaks building freeswitch.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Armada target does not provide platform level support for SSP.
Fixes link failure:
(.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary'
This error does not show up on CI jobs because SSP was effectively always
disabled until the previous commit.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit ccac9a5bbb ("boot/arm-trusted-firmware: don't force
ENABLE_STACK_PROTECTOR") fixed a build failure but also effectively
disabled SSP entirely for ATF. This is because ENABLE_STACK_PROTECTOR is
set to 0 unconditionally in make_helpers/defaults.mk, overwriting any
environment set value. So we must pass ENABLE_STACK_PROTECTOR in
MAKE_OPTS for it to be effective. But to avoid said build failure we
can't pass ENABLE_STACK_PROTECTOR=0.
Only pass ENABLE_STACK_PROTECTOR when
BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP is enabled. Drop SSP_LEVEL value for
the !BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP case which is now unused.
Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2022-26291: lrzip v0.641 was discovered to contain a multiple
concurrency use-after-free between the functions zpaq_decompress_buf()
and clear_rulist(). This vulnerability allows attackers to cause a
Denial of Service (DoS) via a crafted Irz file.
- Use official tarball and so drop autoreconf
https://github.com/ckolivas/lrzip/blob/v0.651/WHATS-NEW
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add new version. Remove patch that has been applied upstream. Update
hash for COPYING as it's text has changed to clarify some details but
the license remains LGP-2.0+L/GPL-2.0+.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Denial of service fixes:
Evgeny Vereshchagin discovered several ways in which an authenticated
local attacker could cause a crash (denial of service) in
dbus-daemon --system or a custom DBusServer. In uncommon configurations
these could potentially be carried out by an authenticated remote
attacker.
• An invalid array of fixed-length elements where the length of the
array is not a multiple of the length of the element would cause an
assertion failure in debug builds or an out-of-bounds read in
production builds. This was a regression in version 1.3.0.
(dbus#413, CVE-2022-42011; Simon McVittie)
• A syntactically invalid type signature with incorrectly nested
parentheses and curly brackets would cause an assertion failure in
debug builds. Similar messages could potentially result in a crash or
incorrect message processing in a production build, although we are
not aware of a practical example. (dbus#418, CVE-2022-42010;
Simon McVittie)
• A message in non-native endianness with out-of-band Unix file
descriptors would cause a use-after-free and possible memory
corruption in production builds, or an assertion failure in debug
builds. This was a regression in version 1.3.0. (dbus#417,
CVE-2022-42012; Simon McVittie)
https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.12.24/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit ff0d534051 (package/iwd: bump version to 1.19), we are no
longer patching configure.ac, so autoreconfigure isn't needed anymore.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
[yann.morin.1998@free.fr: reword with reference to ff0d534051]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Provide a config option that allows the user to enable mmc's "dangerous
commands" if so desired. mmc-utils considers turning on permanent write
protection on a device a "dangerous command" and doesn't offer it by
default.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
[yann.morin.1998@free.fr:
- use if-endif block
- move closer to main option for proper indentation
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a bug fix release. The changes are:
- extmod/machine_i2c: only use WRITE1 option if transfer supports it
This fixes the machine.SoftI2C.readfrom_mem() method on esp32, so it
writes the address to read from.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix memory leak in EdDSA verify processing. (CVE-2022-38178)
- Fix memory leak in ECDSA verify processing. (CVE-2022-38177)
- Fix serve-stale crash that could happen when
stale-answer-client-timeout was set to 0 and there was a stale CNAME
in the cache for an incoming query. (CVE-2022-3080)
- Prevent excessive resource use while processing large delegations.
(CVE-2022-2795)
https://gitlab.isc.org/isc-projects/bind9/-/blob/v9_16_33/CHANGES
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is stable bugfix release of libmdbx. So it is reasonable to backport
this patch to all applicable releases/branches of Buildroot.
Release notes for v0.11.12
--------------------------
Fixes:
- Fixed static assertion failure on platforms where the `off_t` type is wider
than corresponding fields of `struct flock` used for file locking (backport).
Now _libmdbx_ will use `fcntl64(F_GETLK64/F_SETLK64/F_SETLKW64)` if available.
- Fixed assertion check inside `page_retire_ex()` (backport).
Minors:
- Fixed `-Wint-to-pointer-cast` warnings while casting to `mdbx_tid_t` (backport).
- Removed needless `LockFileEx()` inside `mdbx_env_copy()` (backport).
The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This release contains fixes for three minor memory safety problems.
None are believed to be exploitable, but we report most memory safety
problems as potential security vulnerabilities out of caution.
* ssh-keyscan(1): fix a one-byte overflow in SSH- banner processing.
Reported by Qualys
* ssh-keygen(1): double free() in error path of file hashing step in
signing/verify code; GHPR333
* ssh-keysign(8): double-free in error path introduced in openssh-8.9
https://www.openssh.com/txt/release-9.1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a defconfig for the Starfive VisionFive board, a board built around the
Starfive JH7100 RISC-V 64bit SoC (same as Beaglev).
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (6.0 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3 and
misses some variables, so we provide a uEnv.txt to fix that up, based on
what is done in provided Fedora image.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace disable -Werror patch with new cmake option:
-DASSIMP_WARNINGS_AS_ERRORS=OFF
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mosquitto can be configured to use password files. Those have a very
trivial layout, with one "username:password" tuple per line, not unlike
Apache's htpasswd file format, but unlike htpasswd files, the password
can be either in clear (boo!), or encrypted (by calling into openssl's
libcrypto).
Encryption of passwords is done with an ad-hoc tool, mosquitto_passwd,
again very like Apache's htpasswd, but the encrypted form is different
(of course). This encryption is handled by mosquitto_passwd, which can
create, update, or delete users, all while storing their encrypted
password, or it can also convert a password file with clear-text
passwords into a password file with encrypted passwords, e.g. it turns
each "foo:bar" entry to their corresponding encrypted form, like
"foo:$7$101$yLPgk5fn46d....==".
It can be very interesting to maintain a clear-text DB of
users:passwords in configuration management [0], and only convert it to
encrypted passwords when embedded on the target.
Add a host variant for mosquitto, which only installs mosquitto_passwd.
[0] ensuring safety, confidentiality, and integrity of that DB is left
as an exercise to the user, and is clearly out of scope for Buildroot,
like storing the root password in the .config is.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Titouan Christophe <titouanchristophe@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop backported patches and rebase the ones that are still relevant.
From version 37 to 38, there is a new build system in place, which is
still custom Makefiles.
This introduces a host-efivar package to account for the 'makeguids'
tool. Previously it was not too cumbersome to work around building that
tool for the host, but with the new build system it is increasingly
coupled with the target build that the least hacky way to work around it
is with a host package and a Makefile patch.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mender-grubenv no longer uses the mender_grubenv* directories, instead opting
to put the mender_grubenv directories in a grub-mender-grubenv top-level
directory. While there is a legacy install mode which keeps the two separate
directories, it is better to move forward and rip the bandaid off before it
becomes too painful to update in the future if the legacy option is removed
entirely.
- Update the license file sha256 sum due to a year change.
- mender-grubenv no longer installs grub.cfg, so mender_grub.cfg must be copied
manually to grub.cfg.
- BOOT_DIR replaces ENV_DIR in the Makefile.
- The sleep grub2 module is now a requirement.
- /etc/mender_grubenv.config file must be present on the system for the
grub-mender-grubenv-{print,set} scripts to work properly.
In addition to the above changes, update the mender example board file to work
with the updated mender-grubenv version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated vendor/github.com/mendersoftware/mender-artifact/LICENSE hash due to a
year change.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Updated to the new PCRE2 dependency
* Removed unneeded patches (file m4/stack-direction.m4 is not there)
* Removed autoreconf step because unnecessary after not patching m4
anymore
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop the qsimd_p.h fix, this has been fixed upstream since 6.3.2/6.4.0
Signed-off-by: Jesse Van Gavere <jesseevg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 5.17.x series is now EOL upstream, so drop the linux-headers option and
add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[yann.morin.1998@free.fr: split out to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since 2.5.1, volk has been undergoing a relicensing from GPL-3.0+ to the
LGPL-3.0+, which is still not completely done 5by some large margin), so
it is still covered by the GPL-3.0+, but has parts already covered by
the LGPL-3.0+.
We so far only listed GPL-3.0+, but we also had the license file for the
LGPL-3.0+.
Add LGPL-3.0+ to the list of licenses; the COPYING file is the text of
the GPL-3.0+, so we already had it listed (note: the package has a
COPYING-GPL, but i's a symlink to COPYING).
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[yann.morin.1998@free.fr:
- split out to its own patch
- explain why we don't add COPYING-GPL
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since volk 2.5.1, C++17 is required, and no Boost component is used
anymore.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[yann.morin.1998@free.fr: split out to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Denial of service attack and buffer overflow against TLS 1.3
servers using session ticket resumption. When built with
--enable-session-ticket and making use of TLS 1.3 server code in
wolfSSL, there is the possibility of a malicious client to craft a
malformed second ClientHello packet that causes the server to crash.
This issue is limited to when using both --enable-session-ticket and TLS
1.3 on the server side. Users with TLS 1.3 servers, and having
--enable-session-ticket, should update to the latest version of wolfSSL.
https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Mostly internal refactoring and some minor enhancements /fixes in features
cdio_paranoia, ffmpeg (support version 5.1), pipewire, replay gain.
Improve iconv detection.
Fix bogus volume levels with multiple partitions.
For partition support, version 0.23.9 or later is recommended.
Full change log:
https://raw.githubusercontent.com/MusicPlayerDaemon/MPD/v0.23.9/NEWS
Tested on:
i386 (build, run)
x86_64 (build)
aarch64 (build, run)
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We can't use BR2_PACKAGE_LIBOPENSSL to force selecting libopenssl, as
it is part of a choice. Instead, we have a symbol explicitly to force
libopenssl: BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL.
Use that.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The FWTS application and its associated kernel modules do build on arm;
enable it.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
[yann.morin.1998@free.fr: introduce _ARCH_SUPPORTS, sort alphabetically]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Nicolas Tran is apparently no longer at Smile:
The response from the remote server was:
450 4.1.1 <nicolas.tran@smile.fr>: Recipient address rejected: User unknown in virtual mailbox table
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail server is no longer responsive. Every single day, we get:
<joerg.krause@embedded.rocks>: connect to embedded.rocks[99.83.154.118]:25:
Connection timed out
when sending the daily autobuilder report.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop have_mfpu_neon which has been added by commit
b07de37540 but is not recognized:
CMake Warning:
Manually-specified variables were not used by the project:
BUILD_DOC
BUILD_DOCS
BUILD_EXAMPLE
BUILD_EXAMPLES
BUILD_TEST
BUILD_TESTING
BUILD_TESTS
CMAKE_INSTALL_RUNSTATEDIR
have_mfpu_neon
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link to Rust 1.64.0 annoucement: https://blog.rust-lang.org/2022/09/22/Rust-1.64.0.html
Newest version of the source archives have been retrieved with their hash values,
and the signature of the .asc files have been verified as follows:
$ curl -fsSL https://static.rust-lang.org/rust-key.gpg.ascii | gpg --import
$ gpg --verify <filename.asc> <filename>
There is no typographical error in the packages according to the check-pakage utility:
$ ./utils/check-package package/rust-bin/*
$ ./utils/check-package package/rust/*
The testsuite tool were successfully run for rust and rust-bin packages to test
the Rust toolchain under 1.64.0:
$ ./support/testing/run-tests -k -d dl/ -o testsuite tests.package.test_rust.TestRustBin
$ ./support/testing/run-tests -k -d dl/ -o testsuite tests.package.test_rust.TestRust
In order to verify the compatibility of packages depending on Rust 1.64.0,
tests using `./utils/test-pkg` were run.
You may want to execute the test-pkg command after creating a `.config` file
enabling the corresponding BR2_PACKAGE, for example:
Create a file `buildroot/ripgrep.config` containing "BR2_PACKAGE_RIPGREP=y"
Then execute:
$ ./utils/test-pkg -d test-pkg -c ripgrep.config -p ripgrep
Results:
librsvg OK
ripgrep OK
suricata OK
bat OK
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The features of the Cortex A7 CPU on the Aspeed AST2600 A3 SoC are :
half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls vfpv4 idiva idivt lpae evtstrm
the vfpv3d16 feature bit is common to both vfpv3 and vfpv4.
Drop BR2_ARM_FPU_VFPV4 which activates the use of vpfd32 (and breaks
user space). Set BR2_ARM_FPU_VFPV4D16 instead.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From the release notes:
(https://github.com/redis/redis/blob/7.0.5/00-RELEASENOTES)
================================================================================
Redis 7.0.5 Released Wed Sep 21 20:00:00 IST 2022
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2022-35951) Executing a XAUTOCLAIM command on a stream key in a specific
state, with a specially crafted COUNT argument, may cause an integer overflow,
a subsequent heap overflow, and potentially lead to remote code execution.
The problem affects Redis versions 7.0.0 or newer
[reported by Xion (SeungHyun Lee) of KAIST GoN].
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is currently the latest version in the v16.x branch.
Patch 0001-add-qemu-wrapper-support.patch needs some minor adaptations
to resolve conflicts with other unrelated upstream changes. The other
patches are simply refreshed.
The license file is updates due to:
- Reformatting changes
- Addition of the mention of some files being under GPLv3, but it's
only the autoconf machinery: aclocal.m4 and config.guess, so it's
not relevant to add in our LICENSE variable.
- Addition of the mention of another file being under the MIT
license (install-sh), and MIT is already listed, and this file is
anyway only part of the autoconf machinery.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 1facb09b94 ("package/nodejs:
build host-nodejs only if we're installing modules with NPM") forgot
to account for the dependency on Qemu. Now that nodejs no longer
depends on host-nodejs, but needs host-qemu, we need to make sure that
nodejs selects the relevant BR2_PACKAGE_HOST_QEMU options.
So this patch:
- Drops the dependency of BR2_PACKAGE_NODEJS_ARCH_SUPPORTS on
BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET, which was incorrect: we
don't care about running Qemu on the target. We care about
host-qemu supporting the emulation of the target architecture,
which is what BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS is for.
- Adds the dependency to the relevant BR2_PACKAGE_HOST_QEMU options
to BR2_PACKAGE_NODEJS, so that host-qemu is built with the
appropriate features needed to build the target nodejs.
- Removes the qemu related dependencies from host-nodejs, which does
not need Qemu at all.
Without this change the build of nodejs without npm enabled is broken
as the host-qemu that gets built does not have all the features that
are needed. There are no autobuild failures at this point, however.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following sparc build failure raised since bump to version 0.24
in commit 9b5caa2ab4 and
2d3cae005f:
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c: In function 'serial_configure':
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:99:58: error: 'B2500000' undeclared (first use in this function); did you mean 'B1500000'?
99 | #define CASE_BPS(bps, attr) case bps: (attr)->c_cflag |= B##bps; break
| ^
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:127:9: note: in expansion of macro 'CASE_BPS'
127 | CASE_BPS(2500000, &tty_attrs);
| ^~~~~~~~
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:99:58: note: each undeclared identifier is reported only once for each function it appears in
99 | #define CASE_BPS(bps, attr) case bps: (attr)->c_cflag |= B##bps; break
| ^
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:127:9: note: in expansion of macro 'CASE_BPS'
127 | CASE_BPS(2500000, &tty_attrs);
| ^~~~~~~~
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:99:58: error: 'B3000000' undeclared (first use in this function); did you mean 'B1000000'?
99 | #define CASE_BPS(bps, attr) case bps: (attr)->c_cflag |= B##bps; break
| ^
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:128:9: note: in expansion of macro 'CASE_BPS'
128 | CASE_BPS(3000000, &tty_attrs);
| ^~~~~~~~
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:99:58: error: 'B3500000' undeclared (first use in this function); did you mean 'B1500000'?
99 | #define CASE_BPS(bps, attr) case bps: (attr)->c_cflag |= B##bps; break
| ^
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:129:9: note: in expansion of macro 'CASE_BPS'
129 | CASE_BPS(3500000, &tty_attrs);
| ^~~~~~~~
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:99:58: error: 'B4000000' undeclared (first use in this function); did you mean 'B1000000'?
99 | #define CASE_BPS(bps, attr) case bps: (attr)->c_cflag |= B##bps; break
| ^
/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.24/iiod/serial.c:130:9: note: in expansion of macro 'CASE_BPS'
130 | CASE_BPS(4000000, &tty_attrs);
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/8a9902f6eddaab812ebce3506ed6de686f647e02
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 1e2fe860f3 (configs/qemu_ppc64*: downgrade binutils to 2.36.1).
Since then, we've dropped support for binutios 2.36, and hte default is
2.38.x, which has the required changes to fix:
https://github.com/linuxppc/issues/issues/388
Pin the qemu-ppc64 defconfig to explicitly use binutils 2.38.x
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[yann.morin.1998@free.fr:
- explictily force binutils 2.38
- reword commit log to explain why
- reword commit log: it's not really a revert
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This architecture variant is broken in GCC, causing build failures:
../../../libgcc/config/arm/unwind-arm.c:467:1: error: unrecognizable insn:
467 | }
| ^
(insn 2 4 3 2 (set (reg/v/f:SI 118 [ p ])
(reg:SI 0 r0 [ p ])) "../../../libgcc/config/arm/unwind-arm.c":456:1 -1
(nil))
during RTL pass: vregs
../../../libgcc/config/arm/unwind-arm.c:467:1: internal compiler error: in extract_insn, at recog.c:2770
Reported to the GCC developers, the feedback was "iwmmxt support is
definitely bitrotten and most likely should be removed from GCC.".
See:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106972#c1
So this commit simply drops support for iwmmxt, which anyway is
probably barely used nowadays: it's for old Marvell PXA cores that
implemented a special SIMD instruction set. The BR2_xscale option can
be used instead, it's just that it won't use this SIMD instruction
set.
Fixes:
http://autobuild.buildroot.net/results/8e4c4512902c34d8ec0c6f8dfff92b7a198e4b4a/
and the numerous other build failures at:
http://autobuild.buildroot.net/?reason=host-gcc-initial%&subarch=iwmmxt
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building host-nodejs is no longer needed to build the target nodejs,
unless npm is needed during the build, which happens when
BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL is used.
We need to make that host-python3 is built with bz2 and ssl
support. Until now, it was done by the BR2_PACKAGE_HOST_NODEJS option,
but now that the target nodejs no longer depends on host-nodejs, we
are no longer guaranteed to have a host-python3 with bz2/ssl. To make
sure it is the case, we select the relevant options from
BR2_PACKAGE_NODEJS.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The target nodejs package is building those tools, and running them
under Qemu, so it is not necessary for the host variant to install
them.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since upstream commit 79da2534737bd090b7000beed68d225618606e53,
present since NodeJS 16.0.0, another call to the torque tool is done
in tools/v8_gypfiles/v8.gyp, but our patch to wrap calls to such tools
under Qemu forgot this addition. Due to this, the build of NodeJS is
broken since the bump to v16 in Buildroot commit
07408779cc ("package/nodejs: bump to
16.15.0"). This issue is not visible in the autobuilders as it was
hidden by a previous build issue, itself fixed by "package/nodejs: fix
'Duplicate v8 target errors when cross-compiling' error".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reported also via:
https://github.com/nodejs/node/issues/37441
Patched in:
5e533cb943
The error is:
```
ninja: Entering directory `out/Release'
ninja: error: obj.host/tools/v8_gypfiles/run_torque.ninja:1356: multiple rules generate gen/torque-generated/bit-fields.h [-w dupbuild=err]
make[2]: *** [Makefile:127: node] Error 1
make[1]: *** [package/pkg-generic.mk:293: <buildroot>/output/build/nodejs-16.15.0/.stamp_built] Error 2
make: *** [Makefile:84: _all] Error 2
```
Fixes:
http://autobuild.buildroot.net/results/7fe9132236ee8e3a86dd97fe96ffee42990c2d19/
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
[Thomas:
- regenerate patch as a git formatted patch, add a link to the
original location, add my own SoB to it
- improve commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tinyproxy commit 84f203f and earlier does not process HTTP request lines
in the process_request() function and is using uninitialized buffers.
This vulnerability allows attackers to access sensitive information at
system runtime.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgbm isn't output/target specific, only one version is included
in gpu-core/usr/lib/libgbm.so.
Similarly only gbm.pc is included and not gbm_x11.pc.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This uses a newer firmware implementation that is much faster at
booting. It is supported as of Qemu 7.0.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A native implementation of TLS (and various other cryptographic tools)
in JavaScript.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas: switch to pre-compiled JS files instead of depending on
host-nodejs]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, with a configuration with an internal toolchain, and no other
package is selected [0], especially when one wants to generate an SDK or
a pre-built, pre-installed toolchain, running 'make' will only build
glibc (and its dependencies), and not the full toolchain, as one would
have expected, so there would be no host-final-gcc.
The reason is that 'toolchain' is a virtual package, so it is excluded
from PACKAGES, the list of packages enabled in the configuration. so it
is not a dependency of target-finalize, and so nothing pulls it in the
build.
The reason for excluding virtual packages from that list is not obvious.
When virtual packages were introduced in 7439824412 (packages: add
infrastructure for virtual packages), there was no BR2_PACKAGE_FOO
symbol for virtual packages (but there was BR2_PACKAGE_HAS_FOO), so
there was no telling that the virtual package was enabled, like we had
for the other kinds of packages (normal, bootloader, toolchain, or linux
kernel).
That caused issues, so in f674c428c2 (core/pkg-virtual: do not check
they are neabled [sic]), and then 3e1b33a534 (pkg-generic: improve
incorrectly used package detection), we explicitly excluded the virtual
packages from causing a build failure when something depended on them,
as we could not yet now whether a virtual package was actually enabled
or not.
Then, in 842ba7ecef (pkg-generic: fix rdepends and phony targets of
virtual packages), we eventually associated a virtual package to is
BR2_PACKAGE_HAS_FOO, which allows treating virtual packages like the
other kinds of packages. There, we explicitly kept virtual packages out
of the list, though (the reasoning was that virtual packages install
nothing in host/ or target/, so they do not directly contribute to the
final content, so we do not need to rsync them, so this was an
optimisation).
However, virtual packages are in fact actual generic packages, and it is
possible for virtual packages to actually provide content for the final
image. Even though we do not have any virtual package that has actual
_INSTALL_CMDS, we still have udev that provides a user for example;
virtual packages in br2-external trees may also very well provide
install commands (e.g. to install files common to their various
implementations).
So, there is currently no technical reason to exclude virtual packages
from PACKAGES, the list of packages enabled in the configuration.
Drop the excluding condition, and always add enabled package, whatever
their kind, to the list of enabled packages.
[0] defconfig to reproduce the issue:
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
# BR2_TARGET_ROOTFS_TAR is not set
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Our current heirloom-mailx package is affected by CVE-2014-7844. It
has been fixed by a Debian patch
0014-globname-Invoke-wordexp-with-WRDE_NOCMD.patch, but it does rely
on other Debian patches as well.
Instead of bringing those patches locally, we just update the package
to use version 12.5-5 from Debian, including its patches.
The local patch
0001-Patched-out-SSL2-support-since-it-is-no-longer-suppo.patch is
removed as it is part of the Debian patches.
The remaining patch 0002-fix-libressl-support.patch is renumbered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changes:
Disable quiet nan test on windows by @floitsch in #174
Test on all platforms. by @floitsch in #175
Fix warnings on Windows by @floitsch in #176
Run ctests first. by @floitsch in #177
Give shared-lib option and test install by @floitsch in #179
Install Windows debbuger (pdb) files. by @floitsch in #178
Add a cast to silence a signedness conversion warning. by @pkasting in #182
Issue #184 : Fixed all -Wzero-as-null-pointer-constant warnings by @seanm in #185
See https://github.com/google/double-conversion/releases/tag/v3.2.1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changes from 3.0.14 to 3.0.15:
8b018e67212957de176292f95718df48f49a418b Bump revision to VERSION = 3.0.15
803b49c40bb0b720b90d9c31d372911f1b946aa7 */*.S: add non-executable GNU stack marking on ELF-linux
2ed6486834634130fe7bc9b8803b0113767fc7c1 lib/Makefile: add .o file dependency on libsubdirs targets
6b28563584edd08ab9c94a746a8061434c165837 Handle __mips64
The patch
0002-inc-efi-.h-also-support-__mips64-to-recognize-mips64.patch is
dropped as it is equivalent to upstream commit
6b28563584edd08ab9c94a746a8061434c165837 ("Handle __mips64")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the listed versions to match current status since commit
b4d9b51508 ("configs/solidrun_macchiatobin: bump BSP components").
All components are now from upstream so no need to state that for each
one.
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Any .pyc files generated by the pycompile script during target
finalization are currently counted in the "Unknown" package,
because packages-file-list.txt only contains the source .py file.
If a .py file is added to filesdict, add the corresponding .pyc
file as well.
Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It was fixed for musl during conversion to the new API in 0f519d0da
(released in 20220527).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This issue was reported by Firas Khalil Khana on a Github pull request
at https://github.com/buildroot/buildroot/pull/113/.
There is no --disable-static in m4. Research in the dark corners of
the Git history has shown that it was apparently added by Peter
Korsgaard back in 2009, in commit
3467cf7305 ("m4: cleanup"). At this
time, the version of m4 used was 1.4.9, but even looking at the
tarball of this old release shows that the ./configure did not support
--disable-static.
So let's drop this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit bf446513e7 (ncurses: fix hanging installation due to old
version of tic) introduced the build of the host tic, to be used by the
target ncurses. That commit purportedly built a static tic, but that is
(at least now) wrong: there is nothing that makes the build of tic
static.
Initially, host-ncurses was configured with --without-shared, but that
only drives whether to generate shared libs or not, it does not drive
whether to do a shared or static link of executables.
And in any case, in af23d762e5 (ncurses: enable shared library build
on the host) we explicitly stopped requesting the build of a static
library, to instead require the build of a shared library.
So, we never had a statically linked tic ever.
Furthermore, we override the _BUKLLD_CMDS, but we do not provide any
_INSTALL_CMDS. As a consequence, the full ncurses is installed, not just
tic. And since we override the _BUILD_CMDS, the libraries are not built,
so they get built during the install step.
And we do indeed need the libraries (host-gettext needs them), and not
just tic.
So, just drop our custom _BUILD_CMDS and just build the whole package
with the default settings. We keep the explicit use of --with-shared,
as this is not the standard flag (--enable-shared) and it is not obvious
what the default is.
The set of files installed before and after this change is exactly the
same, and tic still is an "ELF 64-bit LSB shared object" with a RUNPATH
that still correctly points to $(HOST_DIR)/lib
To be noted: there is no regressin in build time either, since we were
already building everything anyway.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
QEMU is supported on both 32-bit and 64-bit RISC-V hosts, so let's
enable support for it in buildroot.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default package rtl8812au-aircrack-ng uses CONFIG_PLATFORM_I386_PC that
define -DCONFIG_LITTLE_ENDIAN and this can't be overridden since the
USER_EXTRA_CFLAGS are assigned to EXTRA_CFLAGS in the beginning of Makefile
while -DCONFIG_LITTLE_ENDIAN is assigned later.
Instead of using the default CONFIG_PLATFORM_I386_PC let's set it to 'n'
and let's use the same defines it uses:
-DCONFIG_IOCTL_CFG80211
-DRTW_USE_CFG80211_STA_EVENT
This way -DCONFIG_BIG_ENDIAN can be define without the conflict of being
defined with with the default -DCONFIG_LITTLE_ENDIAN.
Let's also add Linux config FIXUPS to build the module correctly.
Fixes:
http://autobuild.buildroot.net/results/2e4ee705d0e2b728f102aac4e6729f11ef22be36/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release fixes a few very critical issues that happpen when using a glib2 newer or equal
than 2.73.2 (after the pcre1->pcre2 update)
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No review/patches from my side the last few months, so drop my
DEVELOPERS entry.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though Qt6 support using a bundled sqlite, in Buildroot, we
always prefer to use non-bundled libraries when possible.
Signed-off-by: Jesse Van Gavere <jesseevg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to a new major release which brings in improvements and a few
new features. Release notes:
https://webkitgtk.org/2022/09/16/webkitgtk2.38.0-released.html
This release also includes security fixes for CVE-2022-32886,
CVE-2022-32891, and CVE-2022-32912. Accompanying security advisory:
https://webkitgtk.org/security/WSA-2022-0009.html
The CMake option to build the documentation has been renamed from
ENABLE_GTK_DOC to ENABLE_DOCUMENTATION, therefore update the build
recipe accordingly. Option USE_LIBNOTIFY is no longer available, as
WebKit now uses the notification portal D-Bus API directly without
relying on libnotify. Lastly, version 2.38.0 introduces a new WebRTC
implementation based on GstWebRTC which is left disabled for now to
keep the existing status quo (WebRTC not available), and adding an
option to enable it can be done in a follow-up patch.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patches have been used by Alpine for 5 months now and they were
posted on the Busybox mailing list mid-July with no review or comment.
According to Ariadne Conill[1] - though NVD CVSS 3.x Base Score seems to
disagree - this has a low security impact so we could probably just wait
for upstream to merge the patches or implement it the way they want.
Considering those patches have been public for 5 months and upstream
hasn't acted until now, let's take the patches from the mailing list
anyway as there's no indication the CVEs will be fixed upstream soon.
[1] https://gitlab.alpinelinux.org/alpine/aports/-/issues/13661
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NetworkManager supports compiling against either NSS or GnuTLS and in
fact upstream defaults to NSS if both are available and no choice is
specified. Providing a choice can shrink images slightly if some other
package is already pulling in NSS but GnuTLS is not otherwise required.
Since a crypto provider is required and to maintain backwards
compatibility, select GnuTLS when NSS is not selected.
In keeping with the upstream default, choose NSS when both libraries are
available.
Signed-off-by: John Keeping <john@metanate.com>
[Peter: rework to the meson equivalent]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cfg_tilde_expand in confuse.c in libConfuse 3.3 has a heap-based buffer
over-read.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These tools are required for debug scenarios where the debug
happens in-target.
Signed-off-by: Nuno Gonçalves <nunojpg@gmail.com>
[Arnout: install to target in case this option is selected]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
udhcpc default script can handle staticroutes but it is missing from the
default ifupdown options.
Signed-off-by: Remi Jouannet <remi.jouannet@outscale.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As explained in bug #14796, there are situations where the seccomp based
sandboxing in openssh can get confused, leading to connection issues.
As explained by Thomas in the bug report:
glibc does not care about the kernel headers when deciding whether to
try the clock_gettime64() syscall or not: it always use it, and if that
fails at runtime, it falls back to clock_gettime(). This is how glibc
ends up using clock_gettime64() even if your kernel does not support it.
On the other hand, the OpenSSL seccomp code relies on kernel headers to
decide whether the clock_gettime64() syscall should be in the allowed
list of syscalls or not.
So when you are in a situation where glibc is recent, but your kernel is
older, you get into precisely the problem you have: glibc tries to use
clock_gettime64, but OpenSSH seccomp configuration prevents that, which
does not allow glibc to gracefully fallback to clock_gettime (as seccomp
is configured to kill the process on filter violations).
As a workaround, add a _OPENSSH_SANDBOX option (defaulting to y) to
decide if sandboxing should be used or not.
--with-sandbox expects the type of sandboxing to use, and if not
specified, will use the first one available in a list: pledge, systrace,
darwin, seccomp, capsicum, rlimit. On Linux, only seccomp and rlimit are
available, and rlimit probably does not bring much security-wise, so in
all practical matters, on Linux, sandboxing uses seccomp or there is no
sandboxing, so let's just disable sandboxing when we do not want to use
seccomp, and let configure detect seccomp when we request sandboxing.
Fixes (works around) #14796
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: add § about sandboxing types]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit b936a95d02 (package/openssh: bump to version 9.0p1) dropped the
patch touching m4/openssh.m4, but forgot to remove autoreconf. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libopenssl needs atomic or the build will fail (e.g. on sparcv8 without
libatomic):
${LDCMD:-/nvmedata/autobuild/instance-7/output-1/host/bin/sparc-buildroot-linux-uclibc-gcc} -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O0 -g2 -g2 -L. \
-o apps/openssl apps/asn1pars.o apps/ca.o apps/ciphers.o apps/cms.o apps/crl.o apps/crl2p7.o apps/dgst.o apps/dhparam.o apps/dsa.o apps/dsaparam.o apps/ec.o apps/ecparam.o apps/enc.o apps/engine.o apps/errstr.o apps/gendsa.o apps/genpkey.o apps/genrsa.o apps/nseq.o apps/ocsp.o apps/openssl.o apps/passwd.o apps/pkcs12.o apps/pkcs7.o apps/pkcs8.o apps/pkey.o apps/pkeyparam.o apps/pkeyutl.o apps/prime.o apps/rand.o apps/rehash.o apps/req.o apps/rsa.o apps/rsautl.o apps/s_client.o apps/s_server.o apps/s_time.o apps/sess_id.o apps/smime.o apps/speed.o apps/spkac.o apps/srp.o apps/storeutl.o apps/ts.o apps/verify.o apps/version.o apps/x509.o \
apps/libapps.a -lssl -lcrypto -ldl
/nvmedata/autobuild/instance-7/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: ./libssl.so: undefined reference to `__atomic_fetch_sub_4'
It should be noted that openssl3 has added OPENSSL_DEV_NO_ATOMICS but
"this is intended for internal development only, to check the
refcounting is properly coded. It should never become a configuration
option, hence the name of the macro.":
503d4745a1
Atomics are not available in Buildroot if:
- architecture is 32 bit and something other than ARM or xtensa, and
- GCC < 4.8 or no threads or FLAT.
The nothreads case can theoretically happen in many different
situations, but in practice nobody disables threads. So the only
interesting case is the FLAT case. Since ARM and RISC-V 64 both have
atomics intrinsics, that leaves just m68k NOMMU as FLAT. So this is
truly a corner case.
The proper solution would be to patch GCC to also provide libatomic in
those cases.
- For nothreads, atomics are in fact not needed, so libatomic can simply
be implemented as stubs.
- For FLAT, it's probably just a matter of having a match to uclinux in
libatomic/configure.tgt.
Again, though, this happens only in such niche cases that it's not worth
working on it.
Fixes:
- http://autobuild.buildroot.org/results/bce526d538f43a541fdfbc0c9b4a7cecebbbc539
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
libexpat before 2.4.9 (which is still not released) has a use-after-free
in the doContent function in xmlparse.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The conditions in the target CPU choice mostly use negative logic, i.e.
"depends on !<something>". This makes it more difficult to understand
exactly on which ARCH variants the CPU _is_ supported. Therefore, change
all of the conditions to positive logic.
Since there is no little-endian variant of the 32-bit PowerPC, the
conditions are:
!BR2_ARCH_IS_64 <==> BR2_powerpc
!BR2_powerpc64le <==> BR2_powerpc || BR2_powerpc64
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Not needed + breaks compilation on some platforms.
The compilation error was seen on 2.42.8, but also relevant
for 2.42.9 to not compile the test suite.
The option was added in 2.42.9:
801eef111d
```
[179/246] Generating tests/resources.c with a custom command
FAILED: tests/resources.c
/buildroot/output/host/bin/python3 /buildroot/output/build/host-gdk-pixbuf-2.42.8/build-aux/gen-resources.py --glib-compile-resources=/buildroot/output/host/bin/glib-compile-resources --pixdata=/buildroot/output/build/host-gdk-pixbuf-2.42.8/build/gdk-pixbuf/gdk-pixbuf-pixdata --loaders=/buildroot/output/build/host-gdk-pixbuf-2.42.8/build/gdk-pixbuf/loaders.cache --sourcedir=/buildroot/output/build/host-gdk-pixbuf-2.42.8/tests --source ../tests/resources.gresource.xml tests/resources.c
failed to load "/buildroot/output/build/host-gdk-pixbuf-2.42.8/tests/icc-profile.png": Couldn?t recognize the image file format for file ?/buildroot/output/build/host-gdk-pixbuf-2.42.8/tests/icc-profile.png?
../tests/resources.gresource.xml: Child process exited with code 1.
```
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-29187: Git is a distributed revision control system. Git
prior to versions 2.37.1, 2.36.2, 2.35.4, 2.34.4, 2.33.4, 2.32.3,
2.31.4, and 2.30.5, is vulnerable to privilege escalation in all
platforms. An unsuspecting user could still be affected by the issue
reported in CVE-2022-24765, for example when navigating as root into a
shared tmp directory that is owned by them, but where an attacker could
create a git repository. Versions 2.37.1, 2.36.2, 2.35.4, 2.34.4,
2.33.4, 2.32.3, 2.31.4, and 2.30.5 contain a patch for this issue. The
simplest way to avoid being affected by the exploit described in the
example is to avoid running git as root (or an Administrator in
Windows), and if needed to reduce its use to a minimum. While a generic
workaround is not possible, a system could be hardened from the exploit
described in the example by removing any such repository if it exists
already and creating one as root to block any future attacks.
https://github.com/git/git/blob/v2.31.4/Documentation/RelNotes/2.31.4.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Power9 CPU was released by IBM in 2016. It is a 64-bit CPU
implementing ISA v3.0. It runs in big and little endian modes, and
supports VSX and AltiVec.
Power9 is supported as of GCC 6.1 and Binutils 2.26.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout: remove 64-bit constraint]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
With "arch/powerpc: Enable powerpc64le only on CPUs that support it"
we can use this symbol to indicate the CPU is supported by glibc.
This also aligns the conditions with the kernel headers dependencies.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Invalid configurations lead to build failures, such as trying to enable
ppc64le for the ppc970:
http://autobuild.buildroot.net/results/fda886768fce25ccd9b52b635ff5b13da7ba2d0c/
In order to run a ppc64le userspace a kernel that runs in this mode is
required. The only CPU supported in buildroot that can boot a ppc64le
kernel is Power8, so mark all of the other 64-bit capable CPUs as not
supporting ppc64le. For Power7, the situation is not so clear, but there
are anyway no commercially available CPUs for that architecture so it
doesn't matter much either way. Let's be safe and disable LE on that one
as well.
This drops the comment about libc, which is true but doesn't tell the
whole story.
Note that we use positive logic for the new conditions, while the rest
of the file uses negative logic. We'll fix that for the rest of the file
in a follow-up patch.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[Arnout: don't remove 32-bit support for POWER5+]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, we use post-patch hooks to apply our configuration settings.
This works, but this is semantically wrong; post-patch hooks are there
to amend the source code to actually fix it (i.e. because it can't be
done with a patch for example).
Configuring the package, on the other hand, belong to the configure
step, and if we need to tweak the source code for configuration
purposes, this should be done in pre-configure hooks.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit changes qt6base.mk to order conditional blocks
alphabetically based on the BR2_PACKAGE_* option they test.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 5c89b00a20 (package/gdb: remove support for 9.2) forgot to
select the legacy symbol when gdb 9.2 was previously enabled.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As specified in the manual (18.5 The SNNfoo start script),
the name of the script should reflect the name of the daemon,
which in this case in polkitd.
Also remove the redundant/broken reload case.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Polkit has two directories that are used to store rules.
Add the second directory to the existing tests, to ensure
that both work in the future.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The logic implemented in e745c0b to stop makedevs from recursively running
chmod() on dangling symlinks excluded everything that isn't a symlink.
Other file types or directories are skipped/ignored.
Logic has been updated to exit the function if mode shouldn't be changed
or if path is a dangling symlink.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license file has moved from COPYING.txt from LICENSE.txt, but the
license conditions remain the same.
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Check that dependencies that are DT_NEEDED by a program are
automatically copied by dracut. We use cramfs, the package,
as it is small and just depends on libz.
Test more than one dracut config file.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
[Arnout: remove test for features that haven't been merged yet]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
It is not unusual that projects can target multiple boards, and in
such cases, a lot is shared between boards and only the low-level
stuff differ.
Allow users to specify more than one dracut config file to cover
tose cases.
dracut does not accept more than one config file with the -c option,
but it can load more than one from a directory with --confdir. So,
we copy all the config files to a temporary directory and se that as
--confdir. However, we can't drop passing -c, or dracut would read
the system-wide /etc/dracut.conf (not sure if ${prefix} is even used),
which we do not want. So, we use an empty file as -c; /dev/null comes
in handy as an empty file.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since we do not pivot_root/switch_root from the cpio, whatever we get
in the rootfs was exactly what we got by listing the cpio archive.
Drop the test for the presence of pv, it's redundant.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add support for new bluez5-codec-opus codec feature.
Disable new unsupported flatpak feature.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adjust CFLAGS to be able to compile on uclibc-ng < 1.0.42.
Remove patch from this release, backport 3 patches fixing build from
upstream.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the TARGET env variable is set icu may try to use it.
To prevent this from causing issues clear it from the icu env.
Fixes:
>>> host-icu 70-1 Building
PATH="/home/buildroot/buildroot/output/per-package/host-icu/host/bin:/home/buildroot/buildroot/output/per-package/host-icu/host/sbin:/home/buildroot/bin:/home/buildroot/.local/bin:/home/buildroot/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin"
PKG_CONFIG="/home/buildroot/buildroot/output/per-package/host-icu/host/bin/pkg-config"
PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1
PKG_CONFIG_ALLOW_SYSTEM_LIBS=1
PKG_CONFIG_LIBDIR="/home/buildroot/buildroot/output/per-package/host-icu/host/lib/pkgconfig:/home/buildroot/buildroot/output/per-package/host-icu/host/share/pkgconfig"
/usr/bin/make -j33 -C
/home/buildroot/buildroot/output/build/host-icu-70-1/source
cd ./config; \
/usr/bin/make -f pkgdataMakefile
rm -rf config/icu-config
rebuilding config/icucross.mk
rebuilding config/icucross.inc
/bin/bash ./mkinstalldirs lib
/bin/bash ./mkinstalldirs bin
/usr/bin/install -c ./config/icu-config-top config/icu-config
rm -rf pkgdata.inc
chmod u+w config/icu-config
mkdir lib
mkdir bin
LC_ALL=C /usr/bin/sed -f ./config/make2sh.sed < ./config/Makefile.inc
| grep -v '#M#' | uniq >> config/icu-config
config/icu-uc.pc updated.
config/icu-i18n.pc updated.
/usr/bin/make[2]: Making `all' in `stubdata'
LC_ALL=C /usr/bin/sed -f ./config/make2sh.sed < ./config/mh-linux |
grep -v '#M#' | uniq >> config/icu-config
cat ./config/icu-config-bottom >> config/icu-config
(deps) stubdata.cpp
chmod u-w config/icu-config
Note: rebuild with "/usr/bin/make VERBOSE=1 " to show all compiler parameters.
make[3]: *** No rule to make target 'bpf', needed by 'all-local'. Stop.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libedit CLI implementation is supported since commit 9420423900a2
("cli: add libedit support"), nftables v0.9.8. There's an important fix
for Buildroot in v1.0.2, commit 3847fccf0045 ("cli: remove #include
<editline/history.h>").
Also in nftables v1.0.1, libedit/editline cli implementation is made the
default implementation so let's favor libedit implementation over
readline and linenoise if its package is enabled in Buildroot.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps nftables to its 1.0.5 version. This will allow us to enable
the libedit cli implementation in a later commit thanks to a fix in
version 1.0.2, commit 3847fccf0045 ("cli: remove #include
<editline/history.h>").
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
linenoise CLI implementation is supported since commit 023c2d3301a0
("cli: add linenoise CLI implementation."), nftables v0.9.3, so let's
add support for it in its Buildroot package.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The last (and only) release was made 7 years ago and there are 23 newer
commits since then.
This bumps linenoise to the latest commit in the git repo,
97d2850af13c ("Use unsigned int instead of uint like rest of code base.")
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
* Fixed: If USE_LISTEN_ADDRESS_FOR_SENDING_TRAPS was not defined, traps
to IPv6 destinations could not be sent.
* Fixed: Compilation without _SNMPv3 in some example agents
* Added: Added new function Snmpx::get_session_fds_ipv6()
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- Fixed: Winsock has to be included before windows header.
- Fixed: Added SnmpTarget::version_to_string() function
- Fixed: Fixed compiler warning on MSYS2 g++
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Due to a bug in the CodeSourcery ARM toolchain packaging, this
toolchain currently appears as available even for noMMU
configurations, which is obviously wrong. Due to this, the
bootlin-armv7m-uclibc.config fragment ends up using the CodeSourcery
ARM toolchain, which is obviously wrong for an ARM noMMU
configuration, causing a build failure when matching the toolchain
capabilities with the configuration.
Even though we will separately fix the CodeSourcery ARM toolchain
packaging, it makes sense to ensure that the
bootlin-armv7m-uclibc.config fragment explicitly selects the Bootlin
toolchain.
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the fourth patch release in the 1.1.z series of runc, primarily fixing a
regression introduced in 1.1.3 related to device rules, as well as other bugs.
- Fix mounting via wrong proc fd. When the user and mount namespaces are used,
and the bind mount is followed by the cgroup mount in the spec, the cgroup was
mounted using the bind mount's mount fd.
- Switch kill() in libcontainer/nsenter to sane_kill().
- Fix "permission denied" error from runc run on noexec fs.
- Fix failed exec after systemctl daemon-reload. Due to a regression in v1.1.3,
the DeviceAllow=char-pts rwm rule was no longer added and was causing an error
open /dev/pts/0: operation not permitted: unknown when systemd was reloaded.
https://github.com/opencontainers/runc/releases/tag/v1.1.4
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In 3.24, the NTRIP and NMEA0183 drivers are now always enabled, so the
configure options ntrip and nmea0183 have been removed (upstream commits
f8cf4c922 and 838220fee respectively).
As a consequence, drop the options in menuconfig. We do not need to add
legacy support for those options. Indeed, users who had those enabled
will still get the feature, and those who did not will get them, in both
cases without loss of feature.
Finally, we need to fix a runtime issue that makes the kernel segfault
(yeah, that much), because upstream has been yoda-ifying their code, and
they actually borked a comparison. The issue has been fixed upstream,
but that is in a patch tha cobbles up many changes and brings new stuff,
so we just fix the issue with an unupstreamable patch (which we can drop
when we bump when upstream tags a newer release and we update).
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The oldstyle option has been removed a while ago now:
2015-02-22 a5a123b4f3b0 Feature removal - delete last remnants of
old pre-JSON protocol from libgps.
Drop it from Buildroot now.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit c099842544 ("package/libmdbx:
bump version to 0.11.8") forgot to drop the hash for the previous
0.11.7 version, let's do so now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 2.0.15, and upstream commit 71a90177d7b2 (Systemd: Add
mosquitto group ownership), mosquitto uses its own group rather than
the generic nobody group.
This means that mosquitto can now no longer start on a systemd-based
system.
Change our mosquitto user definition to specify a mosquitto group.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Titouan Christophe <titouanchristophe@gmail.com>
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the switch to meson in 58c5846631 (package/network-manager:
migrate autotools build system to meson), the detection of pppd is
broken for cross-compilation:
Has header "pppd/pppd.h" : YES
Program pppd /sbin/pppd /usr/sbin/pppd found: NO
../../../O/br-2022.08/vtc/build/network-manager-1.36.4/meson.build:570:4: ERROR: Assert failed: pppd required but not found, please provide a valid pppd path or use -Dppp=false to disable it
Indeed, meson will simply look for existing files on the host, and that
can't work in cross-compilation.
Fix that by telling meson the results it can't find by itself.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
COPYING was a link to Copyright, this link is now removed
with 2.10.0, fix CVE-2022-2309
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release fixes a lot of bugs found by fuzzing, and fuzzing coverage
has improved much. Also, compression should be better but a little
slower. Speedups for 64-bit ARM have been implemented. Encoding and
decoding 32 bps PCM is now possible.
- Drop sha1 (not provided anymore)
- Drop patch (already in version) and so autoreconf
- Update hash of COPYING.Xiph (year updated with:
10d7ce268b)
https://github.com/xiph/flac/releases/tag/1.4.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit c28b27032b.
This still broke packages using certain older autoconf versions (E.G. 2.13
as used by thttpd/wipe).
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The POLKIT_IGNORE_CVES variable was missing a "S",
therefore the CVE still showed up in the wrong column.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the move to 5.19-rc1, the ethernet interface is now supported.
Configure it using DHCP at startup.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Opensbi is now based on 1.1, U-Boot on 2022.07-rc3 and Linux on 5.19-rc1.
We don't yet support 5.19 kernel headers, so use 5.17 instead.
The incompatibility between opensbi and u-boot is now fixed, so drop
0001-arch-riscv-dts-sun20i-d1.dtsi-adjust-plic-compatible.patch.
The updated device tree in the kernel tree no longer specifies a memory
node (and the board exists in 512M/1G/2G variants, so instead use the
(otherwise identical) device tree provided by u-boot, where the memory
node is fixed up based on the detected memory size.
On riscv, the linux kernel unconditionally wants to build its bundled
dtc, so it needs flex and bison, even if it is not going to build any
DTB. We can get flex and bison either via the system ones, or we get
them as they are in LINUX_KCONFIG_DEPENDENCIES. However, relying on this
is a bit fragile, so we keep asking the kernel to build a DTB, so that
we do ensure that our host-{flex,bison} are built and in the dependency
chain of the kernel (for PPD).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- extend on why we keep building a DTB from the kernel
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Sub-options of a kconfig symbol are only preperly indented below that
sybol, if there is no inter-mixed sylbols or comments.
In this vase, the comment about perf being unavailable is in-between the
perf symbol and the sub-options, which means the perf options are int
indented.
Move the comment before the definition of perf, so that the options
directly follow the per fsymbol, and so they are properly indented.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
package/gcc/11.3.0/0005-rs6000-Improve-.machine.patch:4: generate your patches with 'git format-patch -N'
package/gcc/11.3.0/0006-rs6000-Do-not-use-rs6000_cpu-for-.machine-ppc-and-pp.patch:4: generate your patches with 'git format-patch -N'
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
lots of fixes but most importantly:
- don't allow unknown operational/admin states (CVE-2022-29799, CVE-2022-29800)
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
OpenLayers changed its release format again, only two weeks after the
previous change. The good news is, though, that they now ship a
single release archive that includes the compiled JavaScript code
together with the source code. Furthermore, they ship both code with
a single license, which file is part of the archive.
Hence, we still do not need to rely on host-nodejs for this package,
at least not for this version.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
lots of fixes but most importantly:
- don't allow unknown operational/admin states (CVE-2022-29799, CVE-2022-29800)
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
host-python-pillow was needed to build optee-os from STMicroelecronics
during its rc versions but is is not needed anymore in the release.
It is then useless to keep this support.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
host-python-pillow dependency was needed to build the STMicroelecronics
version during its rc versions but is is not needed anymore in the release.
It is then useless to keep this dependency.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Following the switch to Glibc as the default libc in Buildroot [1],
all defconfigs expecting uClibc with wchar (or any other uClibc
specific option) should now select BR2_TOOLCHAIN_BUILDROOT_UCLIBC too.
Even if all defconfigs has been tested with uClibc, maintainers
prefer to not enforce a C library and use the default of Buildroot,
which is now glibc.
This commit remove uClibc specific options BR2_TOOLCHAIN_BUILDROOT_WCHAR,
BR2_PTHREAD_DEBUG (required by gdb) and BR2_TOOLCHAIN_BUILDROOT_USE_SSP.
Since glibc always has argp built-in, also remove the standalone one
from affected toolchains...
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/2911738579
[1] 4057e36ca9
[2] http://lists.busybox.net/pipermail/buildroot/2022-August/649998.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr: also drop argp-standalone]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gcc 11.3.0 contains a backported patch [1] that introduce
a regression for old powerpc cpus like the powerpc 7400 (G4).
The glibc crash the init process due to a wrong asm machine
directive (.machine).
Run /sbin/init as init process
init[1]: segfault (11) at 7369693e nip 6f6e08 lr 6f6a68 code 1 in libc.so.6[690000+18f000]
init[1]: code: 280a000c 41c1ffe0 811edb80 554a103a 7d48502e 7d4a4214 7d4903a6 4e800420
init[1]: code: 2c08007a 4bffffbc 89290000 5529103a <7d2a482e> 2c090000 41c2ff78 7fe4fb78
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Backport two patches from the gcc-11 stable branch (the upcoming gcc
11.4.0).
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=3cb53c10831be59d967d9dce8e7980fee4703500
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/2976071284
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Joel Stanley <joel@jms.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following security vulnerabilities:
- [Low] Fault injection attack on RAM via Rowhammer leads to ECDSA key
disclosure. Users doing operations with private ECC keys such as
server side TLS connections and creating ECC signatures, who also
have hardware that could be targeted with a sophisticated Rowhammer
attack should update the version of wolfSSL and compile using the
macro WOLFSSL_CHECK_SIG_FAULTS.
- [Low] In wolfSSL version 5.3.0 if compiled with
--enable-session-ticket and the client has non-empty session cache,
with TLS 1.2 there is the possibility oàf a man in the middle passing
a large session ticket to the client and causing a crash due to an
invalid free. There is also the potential for a malicious TLS 1.3
server to crash a client in a similar manner except in TLS 1.3 it is
not susceptible to a man in the middle attack. Users on the client
side with –enable-session-ticket compiled in and using wolfSSL
version 5.3.0 should update their version of wolfSSL.
- [Low] If using wolfSSL_clear to reset a WOLFSSL object (vs the normal
wolfSSL_free/wolfSSL_new) it can result in runtime issues. This
exists with builds using the wolfSSL compatibility layer
(--enable-opnesslextra) and only when the application is making use
of wolfSSL_clear instead of SSL_free/SSL_new. In the case of a TLS
1.3 resumption, after continuing to use the WOLFSSH object after
having called wolfSSL_clear, an application could crash. It is
suggested that users calling wolfSSL_clear update the version of
wolfSSL used.
- Potential DoS attack on DTLS 1.2. In the case of receiving a
malicious plaintext handshake message at epoch 0 the connection will
enter an error state reporting a duplicate message. This affects both
server and client side. Users that have DTLS enabled and in use
should update their version of wolfSSL to mitigate the potential for
a DoS attack.
https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.0-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Docker Compose v2 is no longer a standalone component, but is now a
plugin loaded by docker-cli.
As such, it should not be installed in /usr/bin, but in the directory
where docker-cli loads its plugins from.
Additionally, we consequently make docker-compose depend on docker-cli;
indeed, it does not really make sense to present a plugin unless the
component it attaches to is already enabled [0].
License hash changed due to strictly copying the license text template,
without customisation to the year and copyright owner.
[0] the original submission by Christian would use a select, to keep
existing config, but that's not sensible, as we already have some
packages that are plugins and that use depends-on, like nginx plugins.
For consistency and as it semantically makes sense, we use a depends-on
here too.
Signed-off-by: Christian Stewart <christian@paral.in>
[yann.morin.1998@free.fr:
- don't select docker-cli, but depends-on it; explain it in commit log
- explain why we override the install commands
- explain change in license file hash
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- drop a patch (already in version)
- update Copyright.txt (changed from 1995-2021 to 1995-2022)
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc 4.8 raised since commit
8b42bbf30a:
/home/buildroot/autobuild/run/instance-1/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/http/AuthRealmDB.cpp: In member function 'virtual std::string http::AuthRealmDB::lookup_hash(const string&)':
/home/buildroot/autobuild/run/instance-1/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/http/AuthRealmDB.cpp:93:3: error: 'unique_ptr' is not a member of 'std'
std::unique_ptr<scx::DbQuery> query(m_db->object()->new_query(
^
Fixes:
- http://autobuild.buildroot.org/results/198c23f1de5cc90efe2d3b4ce053939457e003f7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Linux kernel commit 00facc760903 ("perf jevents: Switch build to use
jevents.py") switched to auto-generation of arch-specific PMU events
using python script. Now custom PMU events for different platforms of
the selected target architecture are not embedded into perf binary if
an appropriate host python interpreter is not present. In practice it
means that perf is successfully built, but 'perf list pmu' will show
no custom events on a target platform even if those events are supported
and properly defined in tools/perf/pmu-events/arch/<target arch>
directory in the kernel source tree.
Since building host-python3 is not instantaneous, add a config option,
like we have in the kernel for a bunch of host packages, to id=ndicate
that host-python3 is required, and only add the dependency in that case.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[yann.morin.1998@free.fr:
- add BR2_PACKAGE_LINUX_TOOLS_PERF_NEEDS_HOST_PYTHON3
- extend commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
From the README:
dhcpcd-9 defaults the run directory to `/var/run/dhcpcd` instead of
`/var/run` and the prefix of dhcpcd has been removed from the files.
Make it so.
Signed-off-by: Konstantin Menyaev <KAMenyaev@sberdevices.ru>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This tests valdates that we can publish a message and read it back.
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- don't manually start mosquitto, there's a startup script for that
- don't pass custom timeout
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following error on calling mqtt.publish():
File "/usr/lib/python3.10/site-packages/paho/mqtt/publish.py", line 222, in single
multiple([msg], hostname, port, client_id, keepalive, will, auth, tls,
File "/usr/lib/python3.10/site-packages/paho/mqtt/publish.py", line 126, in multiple
if not isinstance(msgs, collections.Iterable):
AttributeError: module 'collections' has no attribute 'Iterable'
Backported from https://github.com/eclipse/paho.mqtt.python/pull/497/
This was deprecated in python 3.9 and stopped working in python 3.10
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is currently no version of gdbserver for or1k. Until this
is implemented we will prevent both the direct and indirect
selection of gdbserver for or1k builds. In practice this means
that 'cross gdb for the host' cannot be selected and that
'full debugger' must be automatically selected for the gdb target
package.
This partially reverts commit 991b7b990a
which claimed that gdbserver for or1k was already supported before
version 8.3. That is not true - the commit that adds gdbserver support
for or1k [1] was only merged for version 12.1, which hasn't been
integrated in Buildroot yet.
Without that support, the build of gdbserver fails with
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-musl/11.2.0/../../../../or1k-buildroot-linux-musl/bin/ld: server.o: in function `main':
server.cc:(.text.startup+0x6dc): undefined reference to `initialize_low()'
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-musl/11.2.0/../../../../or1k-buildroot-linux-musl/bin/ld: remote-utils.o: in function `prepare_resume_reply(char*, ptid_t, target_waitstatus*)':
remote-utils.cc:(.text+0x28a8): undefined reference to `using_threads'
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-musl/11.2.0/../../../../or1k-buildroot-linux-musl/bin/ld: remote-utils.cc:(.text+0x28b0): undefined reference to `using_threads'
Fixes: http://autobuild.buildroot.net/results/b3c/b3c0df53d09d9facaf0c3c2bc4529f9fcf7737ee
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=4933265c3f71b9134363d0c05f09542d5cc677f4
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit [1] enabled glibc on or1k since it's now supported but it
requires a toolchain with linux-headers >= 5.4.
From [2]:
"Here we define the minumum linux kernel version at 5.4.0, as that is the
long term support version where 32-bit architectures start to support
64-bit time API's. The OpenRISC kernel had some bugs up until version 5.8
which caused issues with glibc fork/clone, they have been backported to
5.4 but not previous versions."
Fixes:
checking installed Linux kernel header files... 3.2.0 or later
checking for kernel header at least 5.4.0... too old!
configure: error: *** The available kernel headers are older than the requested
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/2875256686
[1] 68d0aede59
[2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=0c3c62ca7d9ff3bdacdd13e636bc858101e3e288
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
openssl is an optional dependency since version 1.5.13 and
ee1cfe3bf9
which must be handled through pkg-config to avoid static build failure
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
While building host-rust with a musl based toolchain without C++ compiler,
the build fail since libunwind bundled in rust sources needs a C++ compiler.
cargo:warning=i686-buildroot-linux-musl-gcc.br_real: error: [...]/host-rust-1.62.0/src/llvm-project/libunwind/src/Unwind-EHABI.cpp: C++ compiler not installed on this system
Note: the issues can't be reproduced with a glibc based toolchain
without C++ probaly due to extra steps required to support musl libc.
We could add the C++ dependency direclty to host-rustc but it would
requires adding the C++ reverse dependencies to all rust packages.
Instread, we add the C++ dependency to BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS
only when a musl toolchain is used. So we can still install a prebuilt
rust compiler but without the rust standard library (rust-std).
Usually we should not add toolchain dependencies in a _ARCH_SUPPORTS option but
BR2_PACKAGE_HOST_RUSTC_TARGET_TIER... options contains already some
BR2_TOOLCHAIN_USES_GLIBC or BR2_TOOLCHAIN_USES_MUSL.
Fixes:
http://autobuild.buildroot.org/results/636/636fb39c8f1b8c05e4ca451ac506cd63c7166d82
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Nicolas Tran <nicolas.tran@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The COPYRIGHT file hash has changed due to:
- Copyright (c) 1991, 1999, 2002, 2005-2018,2019 John E. Davis
+ Copyright (c) 1991, 1999, 2002, 2005-2021, 2022 John E. Davis
Signed-off-by: Sven Oliver Moll <svolli@svolli.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To report usable tracebacks, pyc files embed the path of the original py
files, so that users can more easily try and debug the reported issue.
We generate the pyc files by calling the python3-supplied compileall
script, to scan the directory where python modules are installed. Since
this is done on the build machine, we tell compileall.py to strip away
the TARGET_DIR prefix, as that has no meaning at runtime.
However, compileall.py forgets [0] to keep a leading / in the front of
the paths, thus generating non-rooted paths., e.g.:
/path/buildroot.ouput/targt/usr/lib/python3.10/argparse.py
gets embedded as:
usr/lib/python3.10/argparse.py
This is a bit confusing but, as far as we could see, should be mostly be
used for display purposes in tracebacks, and does not seem to impact
actual functionality.
We fix that by instructing compileall.py that the embedded paths should
be rooted to / which generates proper paths in tracebacks.
And alternate solution would be to swith gears, and tell compileall.py
exactly the resulting runtime "base" directory, which replaces the
stripping and prefixing; i.e. it's either:
-s $(TARGET_DIR) -p /
or
-d /usr/lib/python$(PYTHON3_MAJOR_VERSION)
We choose to keep the first solution, because that is semantically what
we really want to do: to strip the leading build-time path, rather than
to force anything.
Note: the python test-suite was executed with both solutions (in a
pyc-only setup), and the results were exactly the same; so in practice,
-d or -s+-p yield the same results.
Many thanks go to Vincent for reporting the issue and suggesting the
solutions.
[0] Not sure whether this is a bug or a feature...
Reported-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 0be1c3e921.
The actual issue is more complex. The problem purportedly fixed was not
caused by a missing libupsclient (it was present), but by a missing type
definition for time_t (on a musl toolchain).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable libupsclient to avoid the following build failure if
libupsclient is installed on host:
src/nut.c:40:2: error: #error "Unable to determine the UPS connection type."
40 | #error "Unable to determine the UPS connection type."
| ^~~~~
src/nut.c:46:3: error: unknown type name 'collectd_upsconn_t'
46 | collectd_upsconn_t *conn;
| ^~~~~~~~~~~~~~~~~~
libupsclient is an optional dependency of nut plugin since version
5.10.0 and
bc2d94024d
Fixes:
- http://autobuild.buildroot.org/results/22b758097e8fb72c68e41329cbc7abc748d81ca6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a new option to have MbedTLS builds that support DTLS-SRTP.
We can only enable the support, it's disabled by default.
Signed-off-by: Dmitry Ilyin <dima@doty.ru>
[yann.morin.1998@free.fr:
- rename variable
- fix variable name in .mk
- drop unnecessary ref to AWS library
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The rule is one-item per line in multi-line assignments, starting with
the first item on its own line too?
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
poco 1.12.0 updated its pcre depencency to pcre2, see:
https://github.com/pocoproject/poco/blob/poco-1.12.2-release/CHANGELOG#L37
The Kconfig selection and dependencies are updated accordingly. This
commit also reorder those Kconfig options alphabetically.
This commit adds an upstream patch to fix compilation failure with
oracle-mysql. See:
3884c734c2
This commit also adds "-latomic" to ldflags at configuration time, if
the toolchain has it. This is required for some architecture: without
this, compilation with bootlin-riscv64-glibc toolchain (for example)
fails at link time with undefined reference to '__atomic_exchange_1'.
The --ldflags option was introduced in 1.12.0 (Thanks Fabrice). See:
https://github.com/pocoproject/poco/pull/3545
For the full Poco change log since 1.11.12, see:
https://github.com/pocoproject/poco/blob/poco-1.12.2-release/CHANGELOG
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The script "utils/check-package" checks that patch email prefix are
not be numbered. See:
https://git.buildroot.org/buildroot/tree/utils/checkpackagelib/lib_patch.py?h=2022.08-rc1#n42
The error message recommends to generate patches to be included in
Buildroot with the command 'git format-patch -N'.
The patch policy section in the Buildroot manual does mention that.
This commit adds a note about that requirement.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable -Werror to avoid the following build failure:
In file included from hash.c:7:
xxhash.h:2667:5: error: #warning is a GCC extension [-Werror]
2667 | # warning "XXH3 is highly inefficient without ARM or Thumb-2."
| ^~~~~~~
xxhash.h:2667:5: error: #warning "XXH3 is highly inefficient without ARM or Thumb-2." [-Werror=cpp]
Fixes:
- http://autobuild.buildroot.org/results/3124bae73c207f1a118e57e41e222ef464ccb297
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add license hashes to the hash file and add the information into the
makefile.
Signed-off-by: Jesse Van Gavere <jesseevg@gmail.com>
[Arnout: use correct file names and hashes]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes flake8 errors:
support/scripts/pkg-stats:1013:133: E501 line too long (164 > 132 characters)
support/scripts/pkg-stats:1018:36: F541 f-string is missing placeholders
support/scripts/pkg-stats:1110:199: E261 at least two spaces before inline comment
For the first and the last one, we chose to split the long lines rather
than adding noqa: 501. Indeed, the long lines make it very unreadable,
and there are relatively natural places where the line can be broken.
Also split a line just below the second one in a similar way.
The f-string on 1018 doesn't need to be an f-string.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure:
In file included from libavcodec/ppc/audiodsp.c:31:
libavcodec/ppc/audiodsp.c: In function 'scalarproduct_int16_altivec':
./libavutil/ppc/util_altivec.h:123:5: error: implicit declaration of function 'vec_vsx_ld'; did you mean 'vec_vslh'? [-Werror=implicit-function-declaration]
123 | vec_vsx_ld(offset, b)
| ^~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/b772d285f978ff9bc3b07872d009633c943f20b1
VSX is indeed an extension to AltiVec, so havinf VSX implies having
AltiVec [0], so we can condition he altivec support on LE ,on VSX being
available.
To be noted, however, is that ffmpeg has a configre switch dedicated to
VSX: --enable-vsx. We do not use it add support for that here, as we are
just fixing the AltiVec support. Adding VSX configure flag is left as an
excercise for a future feature addition.
[0] https://en.wikipedia.org/wiki/AltiVec#VSX_(Vector_Scalar_Extension)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- add comment in .mk
- exend commit log to explain VSX implies AltiVec
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
tools needs C++ since the addition of the package in commit
27ad470d7d resulting in the following
build failure:
no -DHAVE_CONFIG_H -I. -I.. -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I../include -I../master -Wall -DREV=`if test -s ../revision; then cat ../revision; else hg id -i .. 2>/dev/null || echo "unknown"; fi` -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o ethercat-Command.o `test -f 'Command.cpp' || echo './'`Command.cpp
/bin/bash: line 1: no: command not found
Fixes:
- http://autobuild.buildroot.org/results/89d096006839f32a3d03786e69e51ec3c5ea70f6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: move it before package's options]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2022-2652: Depending on the way the format strings in the card
label are crafted it's possible to leak kernel stack memory. There is
also the possibility for DoS due to the v4l2loopback kernel module
crashing when providing the card label on request (reproduce e.g. with
many %s modifiers in a row).
https://github.com/umlaeute/v4l2loopback/blob/v0.12.7/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2022-29154: An issue was discovered in rsync before 3.2.5 that
allows malicious remote servers to write arbitrary files inside the
directories of connecting peers. The server chooses which
files/directories are sent to the client. However, the rsync client
performs insufficient validation of file names. A malicious rsync
server (or Man-in-The-Middle attacker) can overwrite arbitrary files
in the rsync client target directory and subdirectories (for example,
overwrite the .ssh/authorized_keys file).
- Drop patches (already in version)
- Update hash of COPYING (make openssl license exception clearer by
having it at the top and use modern links in COPYING:
dde4695136)
https://github.com/WayneD/rsync/blob/v3.2.5/NEWS.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream commit 7a01882eb37e7504e2450f474d0cc8db60ed26c2
("common: Kconfig.boot: Add FIT_PRINT config option") introduce
CONFIG_FIT_PRINT and make fit_print_contents() empty if it was
not enabled.
Adding CONFIG_FIT_PRINT=y to UBOOT_TOOLS_MAKE_OPTS does not help
while CONFIG_FIT_PRINT=y affects Makefiles only, not C sources.
Add "#define CONFIG_FIT_PRINT 1" to autoconf.h if FIT_SUPPORT enabled.
It would be better to convert uboot-tools to kconfig infrastructure so
we can use KCONFIG_ENABLE_OPT etc. However, that's a much bigger change
and not suitable for backporting to stable branches. Therefore, for now,
take the simple approach of updating autoconf.h.
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure with libressl raised since the addition
of the package in commit 8aaa7ecbce:
In file included from internal.h:45,
from card-authentic.c:32:
/nvmedata/autobuild/instance-29/output-1/host/powerpc64-buildroot-linux-gnu/sysroot/usr/include/openssl/x509v3.h:802:10: error: expected ')' before '*' token
802 | uint32_t X509_get_extension_flags(X509 *x);
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/7b50ab363c174636fb27d554223287d7496676ed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is done either by switching to single quoted f-strings, triple
double quoted f-strings when needed, or simply single-quoted strings.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
Within single-quoted f-strings, and within triple double quoted
strings, escaping all the double quotes is completely useless and
makes the code more difficult to read. Get rid of all this useless
escaping.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
From flake8:
utils/genrandconfig:429:21: E703 statement ends with a semicolon
1 E703 statement ends with a semicolon
Fixes: d3e029575c
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following libkrb5 build failure raised since the addition of the
package in commit 736c4c1655:
checking for krb5-config... /bin/krb5-config
checking krb5-config CFLAGS... Failed to find installation architecture
""
checking krb5-config LDFLAGS... Failed to find installation architecture
checking krb5-config reported version... Failed to find installation architecture
()
checking krb5-config reported vendor... Failed to find installation architecture
checking canonical API type... HEIMDAL
[...]
In file included from src/modules/rlm_krb5/rlm_krb5.c:32:
src/modules/rlm_krb5/krb5.h:41:9: error: unknown type name 'krb5_verify_opt'
41 | krb5_verify_opt options;
| ^~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/f173d1600c278d910f4cbeae86dcad1ee0f911f9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The contents of the license file have changed. It adds the following
details:
- The code examples are distributed under CC0, but we do not install
them.
- The files in the node_modules and external directories is provided
under its own license, but we do not install those files.
Hence, the license remains just MIT.
Signed-off-by: Jesse Van Gavere <jesseevg@gmail.com>
[Thomas: add details on license file change.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we have a python-libevdev package, let's allow the
installation of the libinput Python tools, using a new
BR2_PACKAGE_LIBINPUT_PYTHON_TOOLS option.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-libevdev is needed for libinput replay command:
$ libinput replay recording.yml
Error: No module named 'libevdev'
One or more python modules are missing. Please install those modules and re-run this tool.
Indeed only libinput-replay tool is a python script
(like libinput-analyze-recording, libinput-measure-fuzz...)
python-libevdev itself requires a kernel built with
CONFIG_INPUT_UINPUT option enabled, enable this option if a kernel is
built by Buildroot.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On some CPU architecures it's possible to use MMU pages of different
sizes, for example on ARC or ARM. And while for user-space
applications the page size is supposed to be transparent, there's
still some use of that extra information. In particular it's possible
to align data structures or code/data sections on page boundary, etc.
For these tricks to become possible tools which pack data (think of
the linker, like GNU "ld") need to be informed of the page size to
be considered.
Obviously, there're some sane defaults which are being used most of
the time, so we even think about that peculiarity, but when non-default
value needs to be used, GNU "ld" accepts 2 properties related to page
size:
-z common-page-size=XXX
-z max-page-size=YYY
And while in thery those might be different (but always "common" <= "max"),
and that might make sense if we build for some unknown platfrom,
in case of Buildroot when we build entire target's filesystem and so
know exactly the configuration we're targeting to, we may safely assume
"common-page-size"="max-page-size".
See a lengthy discussion in this thread [1].
Fixes:
http://autobuild.buildroot.net/results/c8b2f331c98453670cd982558144c4fd84674a3d/ (uclibc)
http://autobuild.buildroot.net/results/3a22f7aac38145b26c549254b819f87329e7a77e/ (glibc)
And while at it, recover use of "XX-page-size" for ARC, as with [2]
moving page size selection in the generic code we've got unexpected
override for ARC (note "=", but not "+="):
--------------------->8--------------------
ARCH_TOOLCHAIN_WRAPPER_OPTS = -matomic
--------------------->8--------------------
[1] https://lists.buildroot.org/pipermail/buildroot/2022-July/646176.html
[2] https://git.buildroot.net/buildroot/commit/?id=dcb74db89e74e512e36b32cea6f574a1a1ca84c4
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for selecting a specific version of the DDR firmware
version. For example Variscite's imx8mp-var-dart SOM requires the
"_202006" version of the lpddr4_pmu_train_* binaries.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the option BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW that
allows TF-A to encapsulate a pre-loaded RCW (Reset Configuration Word)
file into BL2.
Upcoming NXP QorIQ family board needs this option.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SIMD needs VSX with little endian to avoid the following build failure:
In file included from /nvmedata/autobuild/instance-12/output-1/build/jpeg-turbo-2.1.3/simd/powerpc/jccolor-altivec.c:25:
/nvmedata/autobuild/instance-12/output-1/build/jpeg-turbo-2.1.3/simd/powerpc/jccolext-altivec.c: In function 'jsimd_rgb_ycc_convert_altivec':
/nvmedata/autobuild/instance-12/output-1/build/jpeg-turbo-2.1.3/simd/powerpc/jsimd_altivec.h:93:26: warning: implicit declaration of function 'vec_vsx_ld'; did you mean 'vec_vsl'? [-Wimplicit-function-declaration]
93 | #define VEC_LD(a, b) vec_vsx_ld(a, b)
| ^~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/be6d5ad0cee4ee19eb25e595d44555a1af6e073b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add support for the Gamepad API in webkitgtk, depending on
libmanette, which is used for implementing access to game
controllers.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
libmanette is a library which provides a higher level interface to
enumerate and make use of game controllers (gamepads, joysticks).
WebKitGTK can use libmanette to expose controllers to web content,
which will be enabled on a follow-up patch.
Minimal kernel headers 4.16 for input_event_sec and input_event_usec
in struct input_event.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout: add kernel headers dependency suggested by Romain]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to add dbus as a build dependency since the meson build system
uses dbus pkg-config to determine install locations.
The meson build also requires mobile-broadband-info in order to get
the database pkg-config variable.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
In case of an unexpected error, we currently only print the exception as
an str(). For example, the recent issue with the glibc version check
only reported:
TypeError: cannot use a string pattern on a bytes-like object
That does not help in fixing the issue; the exception text is also not
usually very user-friendly either anyway.
We change the reporting to print the traceback, which in the glibc
version check mentioned above, the error is reported as:
Traceback (most recent call last):
File "./utils/genrandconfig", line 740, in <module>
ret = gen_config(args)
File "./utils/genrandconfig", line 676, in gen_config
if not is_toolchain_usable(configfile, toolchainconfig):
File "./utils/genrandconfig", line 186, in is_toolchain_usable
if StrictVersion('2.14') > StrictVersion(glibc_version):
File "/usr/lib/python3.8/distutils/version.py", line 40, in __init__
self.parse(vstring)
File "/usr/lib/python3.8/distutils/version.py", line 135, in parse
match = self.version_re.match(vstring)
TypeError: cannot use a string pattern on a bytes-like object
With this, the error is much easier to pinpoint (it's the last one that
is not in a system module).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unless explicitly told otherwise, subprocess.check_output() returns
bytes objects [0].
When we try to check the C library version (to check the Linaro
toolchain is usable), genrandconfig currently fails with:
TypeError: cannot use a string pattern on a bytes-like object
So, as suggested in the python documentation, decocde() the output of
subprocess.check_output() before we can use it.
[0] https://docs.python.org/3/library/subprocess.html#subprocess.check_output
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New version numbering scheme, similar to GLib and Flatpak
version 2.0.24 is now 2.24.0
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The KMS/DRM video driver of SDL2 can currently only be enabled when
mesa3d is the OpenGL provider, as the option has a dependency on
BR2_PACKAGE_MESA3D_GBM. Now that we have a libgbm virtual package and
BR2_PACKAGE_HAS_LIBGBM, we can do better.
However, this has uncovered a number of additional related issues that
are resolved at the same time. Here are some details:
* the 'depends on BR2_PACKAGE_LIBDRM' is changed to a select, as we
normally do for library dependencies. Due to this, we inherit a
BR2_TOOLCHAIN_HAS_THREADS dependency.
* the 'depends on BR2_PACKAGE_MESA3D_GBM' is changed to 'depends on
BR2_PACKAGE_HAS_LIBGBM', and the 'mesa3d' dependency is changed to
'libgbm'.
* the KMS/DRM video driver in SDL2 needs EGL (hence the additional
'depends on BR2_PACKAGE_HAS_LIBEGL' and the libegbl dependency is
added in the .mk file). But in turn, EGL support is only checked
when either OpenGL or OpenGLES support is enabled in SDL2, which is
why we add logic to select the appropriate options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix dependency on comment (invert the symbol dependencies)
- split comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In addition to --enable-video-opengles, SDL2 configure script also
looks at --enable-video-opengles1 and --enable-video-opengles2. Since
all OpenGL ES providers in Buildroot provide at least up to OpenGL ES
2, enable both options when BR2_PACKAGE_SDL2_OPENGLES=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: split long lines]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add many more explicit --disable-<foo>, as we have for example seen
video-vivante being autodetected when not needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python installer package isn't able to overwrite files of packges
that already exist, this causes problems when doing a rebuild or
update without a full clean.
To fix this we can use functionality from importlib to identify and
remove any conflicting python package files before installation.
We also need to use internals from python-installer, as we want to use
the same logic as pyinstaller uses internally for getting the scheme so
that we ensure we clean the correct package scheme (we want it to be the
same as the one we're installing)
Fixes:
Traceback (most recent call last):
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 69, in <module>
main()
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 61, in main
install(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/_core.py", line 109, in install
record = destination.write_file(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 207, in write_file
return self.write_to_fs(scheme, path_, stream, is_executable)
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 167, in write_to_fs
raise FileExistsError(message)
FileExistsError: File already exists: /home/buildroot/buildroot/output/target/usr/lib/python3.10/site-packages/tinycss2/__init__.py
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
[yann.morin.1998@free.fr:
- extend commit log about the use of the installer internals (the
symbols prefixed with '_')
- check path.files against explicitly None
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python installer cli isn't able to overwrite files of packages
that already exist, this causes problems when doing a rebuild or
update without a full clean.
Since we need to add functionality to our pyinstaller.py script to fix
this issue we must also use pyinstaller.py for host python packages.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to use the git download mechanism, as the package depends on a
submodule (an old version of cxxopt), and this is not included in the
archive autogenerated by Github.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
[yann.morin.1998@free.fr:
- bump to 0.0.4
- reword commit log ad help text
- other eye-candy reformatting
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit fda53f0791 ("package/Makefile.in:
add detection for the lack of C library") added an $(error ...)
message when no C library is available for the currently selected
architecture.
However, this error message pops up not just when building, so for
example, the command:
make BR2_HAVE_DOT_CONFIG=y VARS=%_LICENSE printvars
no longer works (this command is used by the pkg-stats script).
We restore a functional behavior by doing the check only when
BR_BUILDING=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The network-manager package builds the nmcli utility when the readline
package is enabled. However, this is not necessarily obvious to the
user. Therefore, this commit adds an explicit option to enable the nmcli
tool, which automatically selects readline.
Signed-off-by: Michael Fischer <mf@go-sys.de>
[yann.morin.1998@free.fr: rewrap commit log and help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The network-manager package builds the nmcli utility when the readline
package is enabled. However, this is not necessarily obvious to the
user. Therefore, this commit adds an explicit option to enable the nmcli
tool, which automatically selects readline.
Signed-off-by: Michael Fischer <mf@go-sys.de>
[yann.morin.1998@free.fr: rewrap commit log and help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following aarch64_be build failure probably raised since the
addition of the package:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64_be-none-linux-gnu/10.3.1/../../../../aarch64_be-none-linux-gnu/bin/ld: ./.libs/libtesseract.so: undefined reference to `tesseract::IntSimdMatrix::intSimdMatrixNEON'
Fixes:
- http://autobuild.buildroot.org/results/b9246a37fcf6be4fabfc491daddadfb09e0a320a
Update the comment about _AUTORECONF=YES, list the two patches since
both touch configure.ac
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: upsdate comment about _AUTORECONF=YES]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
To avoid populating the cross-file with non existing compilers,
we tie them to /bin/false.
As explained by @eliebrokeit on the meson IRC channel:
If you don't have one [a compiler] defined, cross builds won't try
to autodetect one, IIRC...
... however setting it to /bin/false will result in it detecting
that that doesn't work
I guess the safest bet is to deliberately poison it with /bin/false
So there we go.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[yann.morin.1998@free.fr: expand with IRC snippet]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit add a new package version, while keeping the previous one.
This was suggested in:
https://lists.buildroot.org/pipermail/buildroot/2022-August/649398.html
This is because linux-backports increased its minimal requirements on
kernel version. Since Buildroot want to support a wide range of kernel
versions, this package now supports several backport versions, one for
each kernel version era (backports v5.10.110 for kernels down to version
3.10, backports v5.15.58 for kernels down to version 4.4).
For detailed release commit log, see:
https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git/log/?h=v5.15.58-1
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr: split long lines]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with libressl raised since bump to
version 3.37.1 in commit 2546a31cce and
c7ba645918:
/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_client_sigalgs_list'
/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/nios2-buildroot-linux-gnu/10.3.0/../../../../nios2-buildroot-linux-gnu/bin/ld: ./lib/.libs/libsyslog-ng.so: undefined reference to `SSL_CTX_set1_sigalgs_list'
Fixes:
- http://autobuild.buildroot.org/results/84cf9f6a0f6de831a685b73c42eab868952c8b15
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with BR2_PACKAGE_WOLFSSL_ALL raised
since bump to version 5.9.0 in commit
da912a3d2a:
In file included from ../../../../src/libstrongswan/utils/utils.h:59,
from ../../../../src/libstrongswan/library.h:101,
from wolfssl_common.h:29,
from wolfssl_aead.c:23:
wolfssl_aead.c:90:16: error: conflicting types for 'encrypt'; have '_Bool(union <anonymous>, chunk_t, chunk_t, chunk_t, chunk_t *)'
90 | METHOD(aead_t, encrypt, bool,
| ^~~~~~~
../../../../src/libstrongswan/utils/utils/object.h:99:20: note: in definition of macro 'METHOD'
99 | static ret name(union {iface *_public; this;} \
| ^~~~
In file included from /home/autobuild/autobuild/instance-5/output-1/host/powerpc64le-buildroot-linux-musl/sysroot/usr/include/wolfssl/wolfcrypt/wc_port.h:573,
from /home/autobuild/autobuild/instance-5/output-1/host/powerpc64le-buildroot-linux-musl/sysroot/usr/include/wolfssl/wolfcrypt/types.h:35,
from /home/autobuild/autobuild/instance-5/output-1/host/powerpc64le-buildroot-linux-musl/sysroot/usr/include/wolfssl/wolfcrypt/logging.h:33,
from /home/autobuild/autobuild/instance-5/output-1/host/powerpc64le-buildroot-linux-musl/sysroot/usr/include/wolfssl/ssl.h:35,
from wolfssl_common.h:64,
from wolfssl_aead.c:23:
/home/autobuild/autobuild/instance-5/output-1/host/powerpc64le-buildroot-linux-musl/sysroot/usr/include/unistd.h:149:6: note: previous declaration of 'encrypt' with type 'void(char *, int)'
149 | void encrypt(char *, int);
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/02f080c2f6d8272cb8cc1de66e058d66fb7499bc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In addition to --enable-video-opengles, SDL2 configure script also
looks at --enable-video-opengles1 and --enable-video-opengles2. Since
all OpenGL ES providers in Buildroot provide at least up to OpenGL ES
2, enable both options when BR2_PACKAGE_SDL2_OPENGLES=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: split long lines]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add many more explicit --disable-<foo>, as we have for example seen
video-vivante being autodetected when not needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Docker network driver "overlay", "macvlan" and "ipvlan" are not used
by default. Don't force enable them in the kernel.
The main aim here is to get rid of the dummy0 network interface which
is generated by the dummy driver by default.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It includes a simple test for the full cpio image, and a test of the
dracut image. To validate that the dracut image is a subset of the full
image, 'pv' is added to the image, and the test verifies that pv is not
part of the image. Note that the real rootfs is not mounted at the
moment, so pv is never available in the running image.
Systemd and other init systems are currently untested.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adds an option to invoke the dracut host tool, providing
a configuration file, instead of having a full cpio archive
of the whole target directory.
A default configuration file is provided. It assumes busybox init.
ideally, a different default should be used in case of systemd init, but
that's left for future work.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
[arnout@mind.be: many changes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: some additional fixups]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Dracut is the tool used by desktop distributions to build initrds.
In the embedded world, it can be very useful, too, for instance when
wanting to create an initramfs for a system recovery mode.
Whereas it is definitively possible to achieve this with buildroot, the
process is to have a dedicated buildroot configuration for that, and
perform a full build. Instead of doing that, dracut can pick the needed
binaries/shared libraries, configuration files, or kernel modules from
the 'target' directory.
The advantage is to save build time, and also to have a consistency
between the packages versions taken for the recovery and the production
filesystem.
The principle of dracut is based on the so-called 'dracut modules'. The
modules determine what will be included in the initramfs. For example,
one of dracut's modules checks the kernel modules that are included and
also includes the corresponding firmware blobs.
On the host, they are on host/lib/dracut/modules.d
Each directory as a prefix number for the order of execution, and
at least a "module-setup.sh" script.
Dracut sources all of them, and typically calls the "check()" function,
which is the placeholder for required binaries (that are aimed to be
polulated in the initrd), then the "depends()" function, that lists
other modules to depend on, and the "install()" function, that makes
the actual work.
Dracut was initially thought to work with systems using systemd,
but it can also work without it. Do to so, every "systemd-xxx"
module must be disabled in the dracut configuration file. For
convenience, the 05busybox-init module is provided, to support
busybox init system. Note that this module should *not* be enabled when
using systemd init. It is therefore only installed if busybox init is
selected.
Musl and uClibc make assumptions about the existence of some symlinks
that are not discoverable with readelf. Therefore, another module
05libc-links is provided that creates those links. The module is
installed regardless of which libc is used - the script itself discovers
if the links need to be installed based on which libc is found.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
[arnout@mind.be: many changes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: some additional fixups]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We extend the modules search path to be able to load the package
metadata. Currently, it is only restored when loading those
succeeded, not when it failed.
Restore it to its previous state also in case of error, to avoid
leaking the path further.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is perhaps the most controversial change for Buildroot that can
be written in a two-liner.
Historically, we have used uClibc as our default C library, as
Buildroot was created initially as a test-bed for uClibc, and also
because uClibc made a lot of sense for embedded Linux systems, due to
its smaller size and fine-grained configurability.
Since then, the landscape of embedded Linux systems has changed. Even
though Buildroot happily supports really low-end devices, the vast
majority of Buildroot users are quite certainly running the resulting
system on a reasonably powerful platform, with significant amount of
RAM and storage. In this context, the benefits of uClibc are no longer
that much relevant, and glibc causes less "troubles". Therefore, this
patch proposes to use glibc as our default C library when using the
internal toolchain backend instead of uClibc.
Of course, we will keep the support for uClibc, which remains an
important C library choice, for space-constrained systems, or simply
for architectures that are not supported by glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_s3transfer test is
too large, and doesn't fit as an initramfs in the 256MB of RAM
available in the versatilepb machine. This causes a "Initramfs
unpacking failed: write error" when booting, and many files being
missing from the root filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635126
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_botocore test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635042
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_boto3 test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635041
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
9267b0f14d ("package/f2fs-tools: bump to
version 1.15.0"), f2fs-tools was bumped from 1.14.0 to 1.15.0.
It turns out that this version bump causes the output of dump.f2fs to
slightly change.
In version 1.14.0, it looked like this:
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 262144 (128 MB)
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = 70c101c3
Info: checkpoint state = 181 : trimmed nat_bits unmount
In version 1.15.0, it looked like this:
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: Segments per section = 1
Info: Sections per zone = 1
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = b89f8bb
Info: checkpoint state = 181 : trimmed nat_bits unmount
You will notice that the message "Info: total sectors = 262144 (128
MB)" is no longer present, and only "Info: total FS sectors =
262144 (128 MB)" is not present.
Except our test case was precisely looking for this "Info: total
sectors" string in the output, causing the test to fail.
We fix this by simply matching on "Info: total FS sectors" now.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884634814
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The "find" and "xargs" commands, from the "findutils" package are used
during the build process. See for example [1].
Even if it's a quite common package which is almost sure to be present
on the host, it should be listed here. When writing new recipes, hooks
and scripts, it is generally safe and portable to restrict to the
host dependencies listed in those prerequisites.
This commit just add the missing "findutils" package in this list.
[1] https://git.buildroot.org/buildroot/tree/Makefile?h=2022.05.1#n737
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are trying to not build the perf documentation. However, the hook
being used to do so was named incorrectly. As a result, the build steps
to disable the documentation were never executed.
Rename the hook from
LINUX_POST_PATCH_HOOKS
to
LINUX_TOOLS_POST_PATCH_HOOKS
to fix the issue.
Fixes: 20b1446669 ("linux/tools: make it a real, separate package")
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2022-1114: A heap-use-after-free flaw was found in
ImageMagick's RelinquishDCMInfo() function of dcm.c file. This
vulnerability is triggered when an attacker passes a specially crafted
DICOM image file to ImageMagick for conversion, potentially leading to
information disclosure and a denial of service.
- Fix CVE-2022-32545: A vulnerability was found in ImageMagick, causing
an outside the range of representable values of type 'unsigned char'
at coders/psd.c, when crafted or untrusted input is processed. This
leads to a negative impact to application availability or other
problems related to undefined behavior.
- Fix CVE-2022-32546: A vulnerability was found in ImageMagick, causing
an outside the range of representable values of type 'unsigned long'
at coders/pcl.c, when crafted or untrusted input is processed. This
leads to a negative impact to application availability or other
problems related to undefined behavior.
- Fix CVE-2022-32547: In ImageMagick, there is load of misaligned
address for type 'double', which requires 8 byte alignment and for
type 'float', which requires 4 byte alignment at
MagickCore/property.c. Whenever crafted or untrusted input is
processed by ImageMagick, this causes a negative impact to application
availability or other problems related to undefined behavior.
- Update hash of LICENSE (year updated with
80629dfb3f)
https://github.com/ImageMagick/Website/blob/main/ChangeLog.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ualpn is not compatible with libressl as stated by upstream in
32546c7caa
resulting in the following build failure:
ualpn.c: In function 'ssl_client_hello_cb':
ualpn.c:2038:16: error: 'SSL_CLIENT_HELLO_RETRY' undeclared (first use in this function); did you mean 'SSL_F_CLIENT_HELLO'?
2038 | return SSL_CLIENT_HELLO_RETRY;
| ^~~~~~~~~~~~~~~~~~~~~~
| SSL_F_CLIENT_HELLO
Fixes:
- http://autobuild.buildroot.org/results/d7d49cfce6f99c59e99c8e15399164fd5ecacc21
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In 96c3b52132 (package/uacme: don't allow ualpn with mbedTLS), the
preference order moved openssl before mbedtls, because ualpn was not
compatible with mbedtls. That caused the preference order in the .mk to
diverge semantically from the preference order in the Config.in.
Indeed, openssl is only selected when neither gnutls nor mbedtls are
enabled, so openssl is clearly leastpreferred crypto backend. But when
both openssl and mbedtls were enabled, then uacme would use opensslC
because of ualpn.
The ualpn limitation was lifted in 6c7b46945e (package/uacme: allow
ualpn with mbedTLS), but the preference order in the .mk was not
restored to match that of the Config.in.
Restore the order in the .mk so that openssl is again treated as the
least-preferred crypto backend.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- split off to its own patch
- write the full commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit aaced92e8c.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit 115ee05214.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit f8528acdfd.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit 23329364e2.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Freescale extract helper was introduced before Freescale was part
of NXP. Nowadays, we also have NXP packages, and they do use the same
archiving format.
Rename the helper under the now more generic NXP name, so that it is
more logical to also use it for NXP packages. We do not retain the old
Freescale-based name, because we should no longer add Freescale-named
packages; they would most probably be introduced under the NXP name.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr:
- provide the rationale in the commit log
- keep referring to Freescale in comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This helper was introduced before Freescale was part of NXP. Nowadays,
we have NXP packages, and they do use the same archiving format.
Move the Freescale-specific extract helper to a common location, so
that it can be used by other packages in the future.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: provide the rationale in the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update fourth patch to avoid the following build failure with webrtc
raised since commit a40a516c8a:
../output-1/build/pulseaudio-16.1/src/modules/echo-cancel/meson.build:13:0: ERROR: No host machine compiler for 'src/modules/echo-cancel/webrtc.cc'
That is because we removed the C++ language from the global meson.build.
Add it back to the local meson.build in echo-cancel.
The echo-cancel module is always built, but the echo-cancel meson.build
is only included if webrtc-aec is enabled. We only enable it when
webrtc-audio-processing is selected, and that package depends on C++.
Therefore, it is safe to depend on C++ in the echo-cancel meson.build.
Fixes:
- http://autobuild.buildroot.org/results/e60d72268667ed57a254d7552fa2d785e2e21726
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Drop default value of BR2_PACKAGE_XENOMAI_REPOSITORY
- Add BR2_PACKAGE_XENOMAI_{CUSTOM_VERSION_VALUE,REPOSITORY_VERSION} to
mimick what is done by other packages (e.g. barebox, u-boot)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
netsniff-ng unconditionally uses pthread_spin_lock since its addition in
commit 500d287b07 and
1a9fbac03c
resulting in the following build failure:
/home/autobuild/autobuild/instance-1/output-1/per-package/netsniff-ng/host/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/10.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: netsniff-ng/tprintf.o: in function `tprintf_flush':
tprintf.c:(.text+0x42c): undefined reference to `pthread_spin_lock'
Fixes:
- http://autobuild.buildroot.org/results/ceadbdea8cc35bfd7d601a6d4b18137f81f61406
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without threads raised since bump to
version 9.21.4 in commit e4c81885ed:
CompactDisplay.cpp:13:14: fatal error: pthread.h: No such file or directory
13 | #include <pthread.h>
| ^~~~~~~~~~~
For an unknown reason, previously drbdmon (which unconditionally uses
threads) was always wrongly disabled:
configure:5846: checking whether /home/fabrice/buildroot/output/host/bin/arm-linux-g++ supports C++11 features by default
configure:6141: /home/fabrice/buildroot/output/host/bin/arm-linux-g++ -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp >&5
configure:6141: $? = 0
configure:6149: result: yes
configure:6824: WARNING: No C++11 compiler found, disabling drbdmon build.
The correct activation of drbdmon could be a side-effect of
b235e83409
Fixes:
- http://autobuild.buildroot.org/results/2cc7d771176ccde7539cc93d83e9621d9ada8357
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Github repository mripard/sunxi-mali states to use Lima in place of
sunxi-mali because it's deprecated, but this package is still useful in
Buildroot so I want to move the SITE to my Github fork of the original
repository that already contains a patch to fix a build failure showing
up with Linux version >= 5.15.
The upstream patch fixes missing DMA_BUF module inclusion that leads to
build failure. The patch includes DMA_BUF by using:
MODULE_IMPORT_NS(DMA_BUF);
My idea is to continue to maintain this package in parallel to Lima since
it seems to be still useful.
Fixes:
http://autobuild.buildroot.net/results/8f25c26de737c358b3b43a10737609465b4e1398/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Go 1.19 is a major release with changes to the implementation of the toolchain,
runtime, and libraries.
Dropped patch 0002-cmd-dist-use-gohostarch... as it was merged upstream.
https://go.dev/doc/go1.19
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set CROSS variable otherwise makedumpfile will use it to undefine the
host architecture through -U__$(HOST_ARCH)__ if $(TARGET) is not equal
to $(HOST_ARCH). This will result in the following build failure since
the addition of the package in commit
adb64a97e7 if aarch64_be is cross-compiled
on a aarch64 host for example:
/home/autobuild/autobuild/instance-5/output-1/host/bin/aarch64_be-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DVERSION='"1.7.0"' -DRELEASE_DATE='"8 Nov 2021"' -D__aarch64_be__ -U__aarch64__ -DUSELZO -c -o ./print_info.o print_info.c
[...]
makedumpfile.c: In function 'is_kvaddr':
makedumpfile.c:1547:46: error: 'KVBASE' undeclared (first use in this function)
1547 | return (addr >= (unsigned long long)(KVBASE));
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e4e10364e1a24099ce31bf20eacf5adedf93e5a7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 4dff1be05e (package/libvirt: libvirtd needs C++ for nmap-ncat)
introduce a recursive dependency (really: a circular dependency):
package/busybox/Config.in:33:error: recursive dependency detected!
package/busybox/Config.in:33: symbol BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is selected by BR2_PACKAGE_EBTABLES_UTILS_SAVE
package/ebtables/Config.in:11: symbol BR2_PACKAGE_EBTABLES_UTILS_SAVE depends on BR2_PACKAGE_EBTABLES
package/ebtables/Config.in:1: symbol BR2_PACKAGE_EBTABLES is selected by BR2_PACKAGE_LIBVIRT_DAEMON
package/libvirt/Config.in:44: symbol BR2_PACKAGE_LIBVIRT_DAEMON depends on BR2_PACKAGE_NETCAT_OPENBSD
package/netcat-openbsd/Config.in:1: symbol BR2_PACKAGE_NETCAT_OPENBSD depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
We can't drop the C++ dependency and switch the netcat-openbsd and
nmap-ncat dependencies conditions without adding a glibc dependency.
So always mandate C++ even if is only needed by nmap and not
netcat-openbsd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 'dc7ca780a0 package/gstreamer1/gst1-plugins-good: convert package
type to meson' from 2019 removed the symbol, stating:
Remove BR2_PACKAGE_GST1_PLUGINS_GOOD_ZLIB
Existing configs will already have BR2_PACKAGE_ZLIB selected, so no
legacy entry is needed for BR2_PACKAGE_GST1_PLUGINS_GOOD_ZLIB
So drop the reference to the symbol.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These inexistent symbols are referenced since 2014, from commit:
'aa441aa84c openocd: bump to version 0.8.0'
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The typo was added in 2018 by commit
'f3da9ffff0 package/busybox: invert dependency with netcat-openbsd'
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since this commit from 2010:
'87b81bb56f toolchain: move sysroot to host dir'
BR2_STAGING_DIR does not exist anymore.
So fix the typo added in 2014 with commit:
8956c336eb package/qemu: add SDL frontends
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_sparc_v7 was removed in 2013 in commit '16bcf46a63 arch/sparc: drop
old SUN-specific variants'.
BR2_sparc_sparchfleon and BR2_sparc_sparchfleonv8 were moved to legacy
handling in 2014 in commit '43b78e7285 arch: sparc: Add leon3 cpu type
and remove sparc{s,h}fleon{,v8}' and later removed from legacy handling
in 2020.
So drop the remaining references for these symbols.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From time to time we have a reference added to the inexistent BR2_nios:
$ git log --oneline -G'BR2_nios\>'
726dcc6eee package/libvncserver: needs dynamic library
8cd840b7e8 package/ffmpeg: fix typo "nios" -> "nios2"
bd2544d3d3 package/ffmpeg: simplify BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS logic
de7523259b libplayer: fix typo on BR2_nios2
615d65d3c6 mplayer: add missing reverse dependencies for nios2 and sh2a
Fix the last commit, from 2019, like it was done before.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_LINUX_KERNEL_CUSTOM_LOCAL was moved to legacy handling during release
2016.11 but does not select BR2_LEGACY.
Add the select, like done by all other symbols in the file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All other occurrencies in the tree simply do:
select SYMBOL1 if SYMBOL2
instead of
select SYMBOL1 if SYMBOL2=y
So do the same here for consistency.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the only use in the tree without the space.
Do like the other 2k+ uses in the tree and add the space:
-depends on!BR2_...
+depends on !BR2_...
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure raised since bump to version 0.28
in commit 1b677db703:
/home/buildroot/autobuild/run/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/run/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libpng.a(png.o): in function `png_reset_crc':
png.c:(.text+0x738): undefined reference to `crc32'
Note that the custom, hand-rolled configure script inserts the LIBS we
pass on the command line, in front of the hard-coded LIBS, which
currently is just LIBS=-lpng, so we end up with a final LIBS set to:
LIBS=-L.../sysroot/usr/lib -lpng16 -lz -lpng
... the latter -lpng being redundant and unnecessary, but innocuous.
Fixes:
- http://autobuild.buildroot.org/results/97543d8df5c40818e05622490e4aad60b48934a6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: split multi-line one item per line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable documentation to avoid the following build failure if a non
working asciidoc or a2x is found on the system:
asciidoc -o html/syslinux.html /nvmedata/autobuild/instance-3/output-1/build/syslinux-6.03/txt/syslinux.txt
/nvmedata/autobuild/instance-3/output-1/per-package/syslinux/host/bin/python3: No module named asciidoc
Setting {ASCIIDOC,A2X_XML}_OK to a value different of 0 will disable
html, man, xhtml and text documentation
Fixes:
- http://autobuild.buildroot.org/results/47f876ccb56831cc1bb9e6c2f7dbce423581a0dd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following musl build failure raised since bump to version
20211207 in commit ecf85b4ef5:
receivedata.c: In function 'findSlice':
receivedata.c:348:2: error: unknown type name 'ptrdiff_t'
348 | ptrdiff_t pos = slice - clst->slices;
| ^~~~~~~~~
receivedata.c:17:1: note: 'ptrdiff_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
16 | #include "fec.h"
+++ |+#include <stddef.h>
17 |
Fixes:
- http://autobuild.buildroot.org/results/30208c6f175967fed6de690447a09e0c86547b24
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable man pages to avoid the following build failure if a non-working
a2x is found on the system raised since bump to version 11 in commit
b72b849ad5:
/usr/bin/a2x -f manpage -D /nvmedata/autobuild/instance-23/output-1/build/jose-11/build /nvmedata/autobuild/instance-23/output-1/build/jose-11/doc/man/jose.1.adoc
/nvmedata/autobuild/instance-23/output-1/host/bin/python3: Error while finding module specification for 'asciidoc.a2x' (ModuleNotFoundError: No module named 'asciidoc')
Fixes:
- http://autobuild.buildroot.org/results/ae69f7fd1258d99a5b08eeb8c67904be53eabf15
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit c343e01ac4 made udhcpc send a
single DHCP request (instead of 3) before going to the background, thus
speeding up the boot process if the DHCP lease is not obtained
immediately. Unfortunately, this can also slow down the acquisition of
the lease as, after going to the background, udhcpc waits for 20 seconds
(instead of 3) before retrying.
Speed up the lease acquisition by setting the retry timeout to 3
seconds.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following libressl build failure raised since the addition of
the package in commit 27b8d0ba8c:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/armeb-buildroot-linux-gnueabi/11.3.0/../../../../armeb-buildroot-linux-gnueabi/bin/ld: libntp/libntp.a(ntp_random.c.1.o): in function `ntp_RAND_priv_bytes':
ntp_random.c:(.text+0xac): undefined reference to `RAND_priv_bytes'
Fixes:
- http://autobuild.buildroot.org/results/a6a825b7f0efc7c82e8ecf792a1f9951ffb047c5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This option was needed to build versions of GDB < 10.x. As we just
dropped support for GDB 9.x, this logic can now be removed.
The special case to configure just gdbserver was only valid for gdb<10,
but was guarded by !GDB_TOPLEVEL (which was equivalent to gdb<10).
GDB_TOPLEVEL is now always true, so we can't hit that special case
anymore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: add little blurb about gdbserver]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that GDB 12.x has been added, and GDB 9.x removed, we can make GDB
11.x the default version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The handling of the GMP dependency needs a bit of change. Until now,
the GMP dependency was needed when building full GDB (host or target)
in version 11.x or 12.x, so we were explicitly checking whether those
versions were enabled.
Now that only GDB 10.x and the ARC-specific version of GDB are the
only remaining ones not needing GMP, we invert the logic: only those
two versions do not trigger the addition of the GMP dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update hash for license file to account for an update in the (C) years.
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
[yann.morin.1998@free.fr: update the license hash]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7ff21f8d4b (package/binutils: handle gprofng as an optional
feature) introduced the typo. Although it was noticed, the commit was
not amended before being pushed...
Fix that now...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit e8011a08b6 (package/ace: needs C++11) did not explain why it
passed C++ flags via the pre-processor flags rather than as C++ flags
(via ACE's CCFLAGS).
This caused some head-scratching when reviewing and applying
803247337d (package/ace: fix build failure due to gcc bug 101915).
Add a comment to try and explain the non-standard use of pre-processor
flags to pass actual C++ flags.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc; Weber, Matthew L Collins <Matthew.Weber@collins.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
The ace package exhibits gcc bug 101915 when built for the Microblaze
architecture with optimization enabled, which causes a build failure.
As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101915=y.
Fixes:
http://autobuild.buildroot.net/results/f8f/f8f8de99abe92175954c370ad99fee43942bcdcc/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: slight simplification]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 666084f494 ("linux:linux.mk: Add
"firmware-imx" dependency if needed") introduced a dependency from
linux to firmware-imx, but based on the incorrect BR2 option.
This commit fixes this mistake.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It includes an option to build a command line program that can be used
to replace git in simple cases.
The upcoming sha256 repository support made them steal the sha256 code
from RFC6234, hence the license change.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgit2 is currently a library without any reverse dependencies so the
missing atomic symbols do not cause build failures yet.
libgit2 uses the atomics intrinsics on gcc >= 4.7 and the sync
intrinsics on previous gcc versions. Since gcc 4.9 is the new
minimum, ignore the sync intrinsics requirements.
The next version of libgit2 will also build a binary, which will
expose the problem.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgit2 is currently a library without any reverse dependencies so the
missing atomic symbols do not cause build failures yet.
libgit2 uses the atomics intrinsics on gcc >= 4.7 and the sync
intrinsics on previous gcc versions. Since gcc 4.9 is the new
minimum, ignore the sync intrinsics requirements.
The next version of libgit2 will also build a binary, which will
expose the problem.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new releases mostly contain bug fixes. The build system has been
prepared to use AppArmor library, but since actual support is still
missing it is not worth yet to enable build infrastructure in
Buildroot.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
binutils 2.39 added support for gprofng, a new profiler (see
https://www.phoronix.com/news/GNU-Profiler-gprofng).
This new profiler is enabled by default, but it requires bison on the
host.
In order to handle this, this commit:
- Adds a new option BR2_BINUTILS_GPROFNG, which allows to
enable/disable gprofng in host-binutils
- Unconditionnally disables gprofng for the target binutils, based on
the idea that in a Buildroot context the analysis of profiling data
is generally done on the host system. This can of course always be
revisited later by adding a new option to the target binutils
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes garbled tag name in std log file output (critical), and addresses a
minor issue with confusing project name from `syslogd -v` vs `logger -v`.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pass LDFLAGS to avoid the following musl static build failure raised
since the addition of the package in commit
814911aecb:
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/sh4eb-buildroot-linux-musl/11.3.0/../../../../sh4eb-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/sh4eb-buildroot-linux-musl/11.3.0/libgcc.a(unwind-dw2.o): in function `size_of_encoded_value':
/home/autobuild/autobuild/instance-5/output-1/build/host-gcc-final-11.3.0/build/sh4eb-buildroot-linux-musl/libgcc/../../../libgcc/unwind-pe.h:89: undefined reference to `abort'
Fixes:
- http://autobuild.buildroot.org/results/bf041723ed813746c61892262630a3ac2bc43b14
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without threads raised since bump to
version 0.6.0 in commit 017dbc770c and
4a4331f2f2:
CMake Error at /home/giuliobenetti/autobuild/run/instance-1/output-1/build/glog-0.6.0/CMakeFiles/CMakeTmp/CMakeLists.txt:18 (add_executable):
Target "cmTC_ed950" links to target "Threads::Threads" but the target was
not found. Perhaps a find_package() call is missing for an IMPORTED
target, or an ALIAS target is missing?
Fixes:
- http://autobuild.buildroot.org/results/bf0846a51da69169286c7af38089d204d3d242d1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel version for all riscv nommu configs from 5.18 to 5.19.
That way, we can remove the one and only riscv nommu patch,
since this patch is included in kernel 5.19.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This series fixes a fatal error at link time on m68k, xtensa,
and riscv64, caused by a bad upstream elf2flt commit.
Without this patch, m68k, xtensa, and riscv64 would result in
a fatal error:
ERROR: text=0x3bab8 overlaps data=0x33f60 ?
With this patch, qemu_m68k_mcf5208_defconfig,
qemu_riscv64_nommu_virt_defconfig, and
qemu_xtensa_lx60_nommu_defconfig builds properly.
riscv64 and m68k boots to login prompt.
xtensa crashes when loading init, the same behavior as when
reverting the bad upstream elf2flt commit completely.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove broken elf2flt patch:
package/elf2flt/0003-elf2flt-fix-.eh_frame-section-handling.patch
The patch modifies main(), but does not perform a similar change in
output_relocs(), which might cause sectionp in output_relocs() to be
initialized with an invalid address, causing random memory to be
overwritten.
This leads to a segfault when linking e.g. busybox for m68k.
We cannot perform a similar change in output_relocs(), since at this
point in time, data_len will always be non-zero.
Revert this patch completely, so that we can add a working patch.
Note that even with this patch reverted, elf2flt is still broken
on archs like m68k and xtensa, resulting in the fatal error:
ERROR: text=0x3bab8 overlaps data=0x33f60 ?
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From the release notes:
================================================================================
Redis 7.0.4 Released Monday Jul 18 12:00:00 IST 2022
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2022-31144) A specially crafted XAUTOCLAIM command on a stream
key in a specific state may result with heap overflow, and potentially
remote code execution. The problem affects Redis versions 7.0.0 or newer.
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New version contains updated binaries which are part of the NXP
5.15.5-1.0.0 Yocto release.
Update the license hashes for formatting changes and addition of
LC3plus/T2/Bluetooth SIG licenses.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
[Peter: add SCR.txt license file as suggested by Stefan Hager]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to run the full gamut of "perf tests" installing the perf
scripts is required, otherwise we run into errors similar to those:
failed to open shell test directory: /usr/libexec/perf-core/tests/shell
Make this possible by introducing a new option allowing us to install
perf scripts.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
nfs-utils 2.6.2 adds nfsrahead tool to set readahead through sysfs, but
this tool is mandatory and requires libmount that in order requires
libblkid. Also we need a local patch that is already pending upstream to
avoid failing static linking:
https://patchwork.kernel.org/project/linux-nfs/patch/20220809223308.1421081-1-giulio.benetti@benettiengineering.com/
So let's select:
- BR2_PACKAGE_UTIL_LINUX_LIBMOUNT
- BR2_PACKAGE_UTIL_LINUX_LIBBLKID
and add the pending patch for fixing static linking failure due to wrong
order of libraries in linker list(-lblkid must follow -lmount). This is
achieved by using pkg-config that is already a dependency of this package.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since weston 10.0.0, md5 and sha1 hashes are not published
with the release announce email.
The values were probably calculated locally, so remove them
since upstream provide stronger hashes.
Fixes:
f67a6e9b7a
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Octave package test can occasionally fail due to timeout while testing
some octave modules. This commit slightly increase the timeout value
to reduce those failures.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following vulnerabilities:
- [High] Potential for DTLS DoS attack. In wolfSSL versions before
5.4.0 the return-routability check is wrongly skipped in a specific
edge case. The check on the return-routability is there for stopping
attacks that either consume excessive resources on the server, or try
to use the server as an amplifier sending an excessive amount of
messages to a victim IP. If using DTLS 1.0/1.2 on the server side
users should update to avoid the potential DoS attack. CVE-2022-34293
- [Medium] Ciphertext side channel attack on ECC and DH operations.
Users on systems where rogue agents can monitor memory use should
update the version of wolfSSL and change private ECC keys.
https://github.com/wolfSSL/wolfssl/releases/tag/v5.4.0-stablehttps://www.wolfssl.com/docs/security-vulnerabilities/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit makes sure that the python-crossbar package pulls in the
right dependencies, based on the requirements-min.txt.
It does so by:
- Changing the 0002-Remove-idna-requirement patch by a more thorough
patch that drops all indirect dependencies from
requirements-min.txt, making it easier to have a 1:1 mapping
between lines in requirements-min.txt and Buildroot selects.
- Changing the
0003-crossbar-webservice-wap-use-markupsafe-instead-of-we patch to
update requirements-min.txt to indicate the new MarkupSafe
dependency. Here again, to have a 1:1 mapping between lines in
requirements-min.txt and Buildroot selects.
- Updating the Buildroot selects to match requirements-min.txt, with
relevant comments when it does not.
- Fixing up the Crossbar test case to no longer force autobahn to use
umsgpack. Instead, we now use the default of msgpack that is
expected by autobahn.
Fixes bug #14556, https://bugs.busybox.net/show_bug.cgi?id=14556.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It may be confusing, by pyqrcode and qrcode are two different
packages, and autobahn's encryption support needs the latter, with
support for SVG image generation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds options for python-autobahn subpackages that will be
needed by python-crossbar.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The conch subpackage is required by python-crossbar.
Added the serial subpackage while at it, even if it is not required by
Crossbar.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On machines supporting Riscv SV57 mode like Qemu, Go programs currently crash
with the following type of error:
runtime: lfstack.push invalid packing: node=0xffffff5908a940 cnt=0x1
packed=0xffff5908a9400001 -> node=0xffff5908a940
The upstream PR fixes this error, but has not yet been merged.
Upstream: https://go-review.googlesource.com/c/go/+/409055/4
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
imhttp support needs apr-util in addition to civetweb since bump to
version 8.2204.1 in commit bc469ee632
and
a8b8d6c1f9. Without
apr-util, the build fails with:
configure: error: Package requirements (apr-util-1 >= 1.0) were not met:
Package 'apr-util-1', required by 'virtual:world', not found
Instead of having the user needing to figure out that apr-util is
needed for imhttp support, have the top-level rsyslog option selects
apr-util when civetweb-lib is enabled
Fixes:
- http://autobuild.buildroot.org/results/4454ae5321df0c04c9dee19693f3908e69fbf23d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without C++ raised since the addition of
the package in commit e27ef76582:
CMake Error at CMakeLists.txt:3 (project):
No CMAKE_CXX_COMPILER could be found.
Tell CMake where to find the compiler by setting either the environment
variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path
to the compiler, or to the compiler name if it is in the PATH.
Fixes:
- http://autobuild.buildroot.org/results/17e2d6e6d6ddf7845a37a8bbf733faf40d9faa61
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libfreeimage is a mixed CRLF-LF source code. The patch introduced by
commit d3ee0c781e (package/libfreeimage: fix musl build) was missing
the CRLF where they were needed (because patchwork mangles them?).
Fix the three hunks in two files that have the issue.
Reported-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit
88dd3fcd72 ("package/pkg-meson.mk: add
support for fortran cross-compilation") incorrectly handled the
FCFLAGS value to create the cross-compilation.conf file. This commit
fixes that by making the PKG_MESON_CROSSCONFIG_SED macro take a 4th
argument containing the fcflags, and adjusting the call sites, as well
as the PKG_MESON_INSTALL_CROSS_CONF macro.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-scipy is moving to a meson build infrastructure, and requires
fortran cross-compilation. This commit extends the cross-compilation
configuration file generated for use by meson to add the "fortran",
"fortran_args" and "fortran_link_args" properties.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lshw is seldom released, the last one being more than two years ago.
Although the amount of changes is not huge, there have been some
significant changes and fixes, so it warrants a bump to the current
HEAD of the git repo.
lshw tries to build the translations with msgfmt, but as a development
and debugging aid, or as a backend to other scripts, translations are
not really useful. We disable that by overriding the LANGUAGES
variables to an empty list.
Patches are dropped: the basename() patch has been superseded by an
upstream change (introduced shortname() as a wrapper to it), and the
LONG_BIT fix has been applied. It was a bit difficult to find, as
upstream has not applied the patches, nor kept authorship, nor kept the
commit logs...
Of noteworthy attention, this fixes the JSON output format (at least for
the flaws we were hitting in our cases).
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lshw was introduced in early 2012, and since then our coding standards
have evolved substancially, and so lshw is lagging way behind nowadays.
Reformat it with the current styles:
- mandatory dependencies go before build variables
- one item per line in multi-line assignments
- space after the last item in a multi-line assignment
- don't hard-code the build target 'all' in the common make opts
- split long command lines
- format build and install command lines similarly for ease of
comparison
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 29bccabdeb (lshw: use data files provided by hwdata) removed
the hardware info DBs installed by lshw, in favour of those provided by
hwdata, as the former are way out-dated while the latter are more
up-to-date.
However, it forgot to also select the PNP ID database, to replace the
one lshw would install.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pistache couldn't build on uClibc due to just one missing
definition. In addition, the Config.in comment was wrong as it said
that a glibc toolchain was needed, while in fact it could be glibc or
musl.
Cc: Thomas Ruschival <thomas@ruschival.de>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Sometimes buildroot fails with:
../grub-core/kern/emu/hostfs.c:20:10: fatal error: config-util.h: No such file or directory
20 | #include <config-util.h>
| ^~~~~~~~~~~~~~~
Add a patch which fixes the Makefile to correctly generate config-util.h
first.
Note: This re-adds a workaround to avoid re-running autoconf. This has
previously been used to avoid having to run the rather complex build
file generation machinery of GRUB2. See 7e64a050fb ("boot/grub2: Fix
GRUB i386-pc build with Ubuntu gcc"), but now we just need to touch
Makefile.in.
Signed-off-by: Stefan Agner <stefan@agner.ch>
[yann.morin.1998@free.fr:
- add comment with patch name before hook
- slightly extend commit log that we only touch Makefile.in
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable --refclocks=all configure flag, to be able to use several
synchronization sources (hardware).
Refclocks are all disabled by default, and they can only be enabled,
either one by one by name, or globally. Except for PPS support that
needs pps-tools, the other refcloks do not have external dependencies,
so we choose to enable all or none, without fine-grained selection.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[yann.morin.1998@free.fr:
- change comment and commit to explain refclock can't be disabled
- don't add a menu-endmenu
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since version 10, the weston-launch command has been deprecated, and
can only be built with -Ddeprecated-weston-launch=true, which
Buildroot does not do.
So the only launcher currently available is logind, provided by
systemd.
But weston provides an alternate way, based on the seatd daemon. This
commit enables this possibility by adding an optional dependency on
BR2_PACKAGE_SEATD and using -Dlauncher-libseat=true.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
At least libepoxy, a user of OpenGL ES, expects libraries to be
available as libGLESv2.so.2 and libGLESv1_CM.so.1. While other OpenGL
implementations comply with this, gcnano-binaries does not, and
installs its libraries directly as .so, without any ABI version,
causing runtime failures with libepoxy or SDL2, as it tries to
dlopen() the OpenGL ES libraries with their ABI suffix.
See for example the libepoxy code:
https://github.com/anholt/libepoxy/blob/master/src/dispatch_common.c#L191
Fix this issue by adding the relevant symlinks.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
rapidjson has been added as a dependency of pistache as part of commit
2f32185679 ("package/pistache: bump
version & switch to meson build"), using a "depends on". However, as
it is a library dependency, a "select" is normally used in Buildroot.
rapidjson's only dependency is on C++ support, which is already a
dependency of pistache.
In addition, use = instead of += for the rapidjson dependency in the
.mk file, as it's an unconditional dependency.
Cc: Thomas Ruschival <thomas@ruschival.de>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The readme.txt contains a make target that does not match the actual
defconfig file name, fix that.
Fixes: 1500b7d5c8 ("configs/broadcom_northstar: new defconfig")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Broadcom Northstar family of SoCs is most commonly used for home
routers. It's an ARM platform with Cortex-A9 CPU(s).
All known Northstar devices come with CFE bootloader which almost
always expects a TRX firmware format (with exception for D-Link). Some
vendors (like Luxul and Netgear) wrap TRX in their own containers.
This board code provides:
1. Minimal kernel with support for on-SoC blocks. It enables Linux
drivers for SoC, watchdog, Ethernet, switch, USB, PCIe, LEDs).
2. Post image script building firmware images. In uses Buildroot
packages tools (lzma_alone, otrx, lxlfw) to build
bootloader-compatible images that can be flashed.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When one is applying patches, it is pretty common to end up with .orig
and/or .rej files lying around. Unfortunately, our 'Config.*' match in
check-package ends up matching those files, causing false positives
when running "make check-package". To avoid this, this commit
excludes *.orig and *.rej files for the find logic used in the
check-package target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
protobuf changed it versioning scheme [1]. The Release version is now only the
Minor.Patch version of the language specific version.
C++ stays on Major version 3, but python got bumped to 4. So the handling in
the .mk files changed to reflect that.
python-protobuf changed it version to 4 because of some breaking changes,
see[1].
[1] https://developers.google.com/protocol-buffers/docs/news/2022-05-06
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
construct is a Python library for declarative serialization/
deserialization of structured binary data.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uClibc-ng 1.0.41 added ns_t_tkey, but since external toolchains may
have a version older than 1.0.41, we introduce a compatibility patch
that avoids the use of ns_t_tkey. This compatibility patch can be
dropped in the future when uClibc-ng 1.0.41 is sufficiently deployed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
printvars returns nothing when VARS is not passed or empty. This is done
on purpose, see commit fd5bd12379 ("Makefile: printvars: don't print
anything when VARS is not set").
An error message making explicit what is required from the user in order
to use printvars is however better than silently doing nothing.
This adds a check for a non-empty VARS variable.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 5c54c3ef3d (Makefile: workaround make 4.3 issue for 'printvars
and 'show-vars') did not fully fix the show-vars case, which still
segfaults.
Overall, show-vars generates a JSON blurb. That is supposed to be
machine-readable, so we do not care that the variables are sorted, so
we get rid of it to (slightly) simplify the code.
Then, we currently iterate twice on the list of variables: the first one
to filter-out the 'internal' variables, and the second one to filter
only the variables matching the pattern. We can do away by iterating
only once, and applying both filters at once.
Since we now have an 'and' condition, we can take advantage of it: when
none of the items in $(and) are empty, $(and) evaluates to the last
item, while it evaluates to empty if any of the items is empty. So we
can coalesce the $(if) and $(and) together: $(if $(and a,b),c) is
equivalent to: $(and a,b,c) ; this gains us one parentheses depth.
Finally, the cause for the segfault is an overly-long call to $(info).
Reducing that is not easy: we want to call clean-json on the whole of
the JSON blurb, so we can't emit the individual variables one by one, or
the trailing comma would not be trimmed away.
So, we go crazy: we just output each word from clean-json with $(info).
We can do that, because mk-json-str transforms all spaces in a string
to an escaped UTF-8 sequence, so we will never have spaces in values;
the keys are the variables, so they won't have spaces either; spaces in
the rest of the JSON blurb are totally optional, so we don't care how
many there are. We know there are spaces, because we explicitly
introduce some (after "expanded" or "raw", for example), so we should
never hit a too-big word for $(info) to print.
Thanks to Henri for the suggestion to push $(info) further inside the
macro.
Reported-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Roosen Henri <Henri.Roosen@ginzinger.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Importing the scipy module in the Python interpreter running in Qemu
takes quite a while on slow machine, so a timeout extension to 30
seconds is needed to make sure the test has the time to run.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
go1.18.4 includes security fixes to the compress/gzip, encoding/gob,
encoding/xml, go/parser, io/fs, net/http, and path/filepath packages, as well as
bug fixes to the compiler, the go command, the linker, the runtime, and the
runtime/metrics package.
go1.18.5 includes security fixes to the encoding/gob and math/big packages, as
well as bug fixes to the compiler, the go command, the runtime, and the testing
package.
https://go.dev/doc/devel/release#go1.18.minor
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rebase patches as necessary and bump version to 11.3.5. This allows
to build openvmtools for aarch64.
Both patches 0009-Set-permissions-on-rules-file.patch and
0010-Change-DEVPATH-to-devpath.patch are removed as they are upstream
as of commit 86d3256f2acccc066648e6b25e16b46930338406 (in release
11.0.5).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The initial support for the LLVM package did not include RISC-V, and
needed to be added. Some special casing is needed for the
LLVM_TARGETS_TO_BUILD variable, which expects a RISCV value regardless
of whether riscv32 or riscv64 is chosen.
Signed-off-by: Abel Bernabeu <abel@x-silicon.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.10.72-2.2.0.
This commit also refresh the readme.txt file:
- update no longer working URLs,
- enhance flashing instructions (use ${mmcdev} uboot variable),
- add "bs=1M" option to dd for better flashing performances.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800735
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.10.72-2.2.0.
This commit also refresh the readme.txt file:
- update no longer working URLs,
- enhance flashing instructions (use ${mmcdev} uboot variable),
- add "bs=1M" option to dd for better flashing performances.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800730
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the test into a characterization test for all warnings and errors
get-developers can return when parsing the DEVELOPERS files.
It will be helpful when changing the behavior of get-developers to bail
out on all syntax checking warnings.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cog uses the dmabuf and plane-count-modifier features from libgbm.
These are provided by mesa3d, but may not be provided by other libgbm
providers.
So, make this a dependency.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The DRM platform support already has the 'BR2_PACKAGE_HAS_UDEV' symbol in
package/cog/Config.in
We just need to specify 'udev' as a dependency in the cog.mk file.
The udev virtual package is pulled by libinput anyway, but this makes it
more explicit.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mostly a bugfix release (critical fixes to syslogd below), which also
includes some features added to the logger tool and libsyslog related
to logging to remote syslog servers, bypassing the local syslogd.
Critical fixes:
- Prevent over-read when scanning kermel log messages
- Prevent kernel log file corruption when messages contain control
codes, notably '\n', now C-style hex encoding is preserved (\x0a)
- Forwarding of log messages to remote servers stops after a few
SIGHUPs have been received (bug introduced in v2.4.0)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming version bump of transmission.
Build test using this defconfig
BR2_PACKAGE_DHT=y
was successful:
andes-nds32 [ 1/45]: OK
arm-aarch64 [ 2/45]: OK
bootlin-aarch64-glibc [ 3/45]: OK
bootlin-arcle-hs38-uclibc [ 4/45]: OK
bootlin-armv5-uclibc [ 5/45]: OK
bootlin-armv7-glibc [ 6/45]: OK
bootlin-armv7m-uclibc [ 7/45]: OK
bootlin-armv7-musl [ 8/45]: OK
bootlin-m68k-5208-uclibc [ 9/45]: OK
bootlin-m68k-68040-uclibc [10/45]: OK
bootlin-microblazeel-uclibc [11/45]: OK
bootlin-mipsel32r6-glibc [12/45]: OK
bootlin-mipsel-uclibc [13/45]: OK
bootlin-nios2-glibc [14/45]: OK
bootlin-openrisc-uclibc [15/45]: OK
bootlin-powerpc64le-power8-glibc [16/45]: OK
bootlin-powerpc-e500mc-uclibc [17/45]: OK
bootlin-riscv32-glibc [18/45]: OK
bootlin-riscv64-glibc [19/45]: OK
bootlin-riscv64-musl [20/45]: OK
bootlin-sh4-uclibc [21/45]: OK
bootlin-sparc64-glibc [22/45]: OK
bootlin-sparc-uclibc [23/45]: OK
bootlin-x86-64-glibc [24/45]: OK
bootlin-x86-64-musl [25/45]: OK
bootlin-x86-64-uclibc [26/45]: OK
bootlin-xtensa-uclibc [27/45]: OK
br-arm-basic [28/45]: OK
br-arm-full-nothread [29/45]: OK
br-arm-full-static [30/45]: OK
br-i386-pentium4-full [31/45]: OK
br-i386-pentium-mmx-musl [32/45]: OK
br-mips64-n64-full [33/45]: OK
br-mips64r6-el-hf-glibc [34/45]: OK
br-powerpc-603e-basic-cpp [35/45]: OK
br-powerpc64-power7-glibc [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips64 [43/45]: OK
sourcery-mips [44/45]: OK
sourcery-nios2 [45/45]: OK
45 builds, 0 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming version bump of transmission:
d8d765c595
Build test using this defconfig
BR2_PACKAGE_LIBDEFLATE=y
was successful:
andes-nds32 [ 1/45]: OK
arm-aarch64 [ 2/45]: OK
bootlin-aarch64-glibc [ 3/45]: OK
bootlin-arcle-hs38-uclibc [ 4/45]: OK
bootlin-armv5-uclibc [ 5/45]: OK
bootlin-armv7-glibc [ 6/45]: OK
bootlin-armv7m-uclibc [ 7/45]: OK
bootlin-armv7-musl [ 8/45]: OK
bootlin-m68k-5208-uclibc [ 9/45]: OK
bootlin-m68k-68040-uclibc [10/45]: OK
bootlin-microblazeel-uclibc [11/45]: OK
bootlin-mipsel32r6-glibc [12/45]: OK
bootlin-mipsel-uclibc [13/45]: OK
bootlin-nios2-glibc [14/45]: OK
bootlin-openrisc-uclibc [15/45]: OK
bootlin-powerpc64le-power8-glibc [16/45]: OK
bootlin-powerpc-e500mc-uclibc [17/45]: OK
bootlin-riscv32-glibc [18/45]: OK
bootlin-riscv64-glibc [19/45]: OK
bootlin-riscv64-musl [20/45]: OK
bootlin-sh4-uclibc [21/45]: OK
bootlin-sparc64-glibc [22/45]: OK
bootlin-sparc-uclibc [23/45]: OK
bootlin-x86-64-glibc [24/45]: OK
bootlin-x86-64-musl [25/45]: OK
bootlin-x86-64-uclibc [26/45]: OK
bootlin-xtensa-uclibc [27/45]: OK
br-arm-basic [28/45]: OK
br-arm-full-nothread [29/45]: OK
br-arm-full-static [30/45]: OK
br-i386-pentium4-full [31/45]: OK
br-i386-pentium-mmx-musl [32/45]: OK
br-mips64-n64-full [33/45]: OK
br-mips64r6-el-hf-glibc [34/45]: OK
br-powerpc-603e-basic-cpp [35/45]: OK
br-powerpc64-power7-glibc [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips64 [43/45]: OK
sourcery-mips [44/45]: OK
sourcery-nios2 [45/45]: OK
45 builds, 0 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Follow transmission switching from branch post-3.3-transmission to
branch post-3.4-transmission:
745adf8332
This branch contains a copyright year bump for the license file:
365254427e
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test relies on the OLA Dummy plugin presenting a test device
and port. It starts the daemon, performs few configuration commands,
covers the Python bindings and also test the OLA web interface.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Revert the toolchain to version 10.x because of bug in 11.x:
when the pre-packaged GCC was built, it could be targeting
a newer x86_64 architecture than the processor being used.
Confirmed fix will be implemented in the next release:
https://bugs.linaro.org/show_bug.cgi?id=5825#c19
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Arnout:
- Indent hash file with two spaces.
- Bump to 1.7.3 to fix build failure with recent GCC.
- Get from github instead of PyPI.
- Add host-meson and host-python-pythran dependencies.
- Properly propagate Config.in dependencies.
- Correct usage of BR2_INSTALL_LIBSTDCPP symbol.
- Remove F77, no longer used.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Guillaume:
- -lnpymath: npymath.ini localization problem
- -lnpyrandom resolution problem
- fix legal-info for latest version LICENSE.txt
- zlib is a scipy::io module runtime requirement
- update serie for scipy 1.8.1 (latest)
]
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- add runtime test
- drop dependency on OpenBLAS, which is not needed in a minimal
configuration
- remove PYTHON_SCIPY_NPY_PKG_CONFIG_PATH logic as it is no longer
needed
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generated with scanpypi and converted to host.
It is a dependency of python-pythran.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generated with scanpypi and converted to host.
It is a dependency of python-beniget and python-pythran.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While building host-babeltrace2 asciidoc python3 module is required but
Buildroot doesn't make it available, so let's --disable-man-pages for host
as we do for target.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
iptables generally bundles the netfilter header files inside its own
tar-ball.
Since iptables 1.8.8, it started to make use of netfilter/nf_log.h, but
didn't include it in the iptables tar-ball. This can lead to build
failures.
Add a patch that rectifies this for iptables 1.8.8.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This attempts to re-implement the "sortable_hint" feature without
relying on words. The column headers and CVE expand/contract buttons
change color and cursor style on hover.
If Javascript is enabled:
Just like [PATCH 1/3] more rules are applied to the
generated stylesheet before content is loaded.
If Javascript is disabled:
The headers stay pearly white. :-)
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes a package can have a lot of CVEs.
Rather than have the CVE cell make a really tall row
(that means you have to scroll a bunch) this collapses the CVE
cell to a fixed size scrollable element with a
sticky button that lets you expand and collapse it.
If Javascript is enabled:
A stylesheet is generated and appended before content rendering,
amending the cells style to have a fixed height and overflow.
Also, the expand/contract button is unhidden.
This means the CVE cells are rendered in a collapsed state
instead of being rendered in an expanded state and then
slamming shut.
This avoids a "flash" and *helps* (vertically at least) manage CLS
(cumulative layout shift).
see: https://web.dev/cls/
If Javascript is disabled:
The cells stay fully open and the expand/contract button stays hidden.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit c4e6d5c8be (core: implement per-package SDK and target)
introduced leading TABs in that otherwise-space-indented script.
Convert all to spaces, for homogeneity
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Libdill is a C library that makes writing structured concurrent programs
easy.
There has been no release in more than two years, so we use the latest
commit on the master branch.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- explain use of a sha1
- fix check-package warnings
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This makes the condition easier to read and it's easier to maintain the
gcc bug too because we don't have to take care about new gcc versions.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: fix comment while at it]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This makes the condition easier to read and it's easier to maintain the
gcc bug too because we don't have to take care about new gcc versions.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Older versions of TF-A don't support setting CFLAGS on the make command
line. They use 'CFLAGS += ...' in the Makefile, which is still
overridden by the CFLAGS on the command line.
Fix this by moving the CFLAGS setting to the environment. Both older and
newer versions of TF-A handle this correctly.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800954
and a large number of other defconfigs
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The OpenRiSC gdb port has supported native debugging since version 8.3
and remote debugging since before that. So it is now safe to enabled
this.
This patch removes the conditions blocking gdb from being built on or1k
architecture builds.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Event though the bug with make 4.3 has been reported and fixed, there
has not been a release of make with the fix for a long time, see [1].
As the root cause seems the 'filter' command cannot handle large
chunks of data, like .VARIABLES, we can workaround the problem by
using a foreach command over .VARIABLES, then use the filter command.
It might not be logical to program it that way, but at least the
functionality is now usable.
[1] https://savannah.gnu.org/bugs/?59093#comment10
Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com>
[yann.morin.1998@free.fr: add comment to reference the bug]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The manual explanation seemed to imply that the cache is always in
~/.buildroot-ccache/, but it's just the default value. Clarify this
point.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Back many years ago, we developed an Eclipse plugin that simplified
the usage of Buildroot toolchains. Enabling the BR2_ECLIPSE_REGISTER=y
was registering the Buildroot toolchain into a special file in your
HOME folder that the Eclipse plugin would recognize to allow to
directly use the Buildroot cross-compiler.
This Eclipse plugin has not been maintained for years. The last commit
in the repository dates back from September 2017. Since then Eclipse
has moved on, and the plugin is no longer compatible with current
versions of Eclipse.
Also, Eclipse is probably no longer that widely used in the embedded
Linux space, as other more modern IDEs have become more popular.
All in all, it's time to say good bye to this Eclipse integration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a section to the "Integration topics" chapter about how we integrate
systemd. Add a first subsection about how dbus and dbus-broker work with
systemd.
This is just the start of the integration information about systemd.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We want to add more information in the manual about how a system created
with buildroot works overall. We currently already have a chapter about
SELinux, but we want to add more information like that, e.g. details
about how systemd in Buildroot works.
Create a new chapter "Integration topics" with an introductory blurb,
and move the SELinux topic under it (as a section rather than a
chapter).
"Integration topics" is not the best title, but we couldn't find
anything better.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: remove selinux from main manual.txt]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
While introducing gcc bug 99410 I've named BR2_TOOLCHAIN_HAS_GCC_BUG_ to
99140 that is wrong. So let's fix this by changing bug option to
BR2_TOOLCHAIN_HAS_GCC_BUG_99410.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop local patches that have been upstreamed
- Remove AUTORECONF since configure.ac patches have been upstreamed
- Add --disable-asciidoc to avoid generating manual pages that require
asciidoctor leading to build failure
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bogus BR2_GLOBAL_PATCH_DIR value was added in commit
9dd5382d79 ("board/intel/galileo: fix
build failure with host gcc 10") back in February.
This should help fixing
https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800667, as it
complains with:
WARN: defconfig ./configs/galileo_defconfig can't be used:
Missing: BR2_GLOBAL_PATCH_DIR=board/intel/galileo/patches
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a simple test importing pyalsa, showing alsa library version and
attempting to list cards.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that all hash files have been fixed, enable checking of hash
spacing in check-package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's time to finally switch over globally to the new spacing format
that we have agreed on for the hash file, with 2 spaces as a separator
between fields.
This commit was mechanically generated using:
find . -type f -name '*.hash' | xargs sed -i 's%^md5[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%md5 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha1[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha1 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha256[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha256 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha512[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha512 \1 \2%'
This commit can easily be backported on the LTS branch by re-running
the same commands, if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In eudev and systemd, we have code that deletes the hwdb sources from
the target - they are not useful since a binary hwdb is created from
them. However, if eudev or systemd is not used, then those sources are
not useful either. It's possible that other packages than eudev or
systemd install hwdb files, which would be left on the system.
Always remove the hwdb files.
Note that we don't expect much space savings from this, but anything may
help. It's certainly more consistent to do it always than just in eudev
and systemd.
We do this both from /usr/lib/udev (usual installation path for systemd)
and in /etc/udev (usual installation path for eudev) because packages
may install in either location.
We keep the comment explaining why it's done in rootfs-pre-cmd instead
of target-finalize - this was only present in eudev.mk.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The HOST_EUDEV_SYSCONFDIR is a leftover from before eudev, when udev was
still built from systemd sources. Now that we have a separate file for
eudev and systemd, there's no need any more to have a condition there.
In addition, its usage in systemd.mk has been removed.
Remove the HOST_EUDEV_SYSCONFDIR variable and instead use /etc directly
in eudev.mk.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It turns out that zsh has a number of additional TRY_RUN calls. We
already set a few with cache variables, add a few more. They are found
based on reading the configure.ac, aczsh.m4, and the configure output.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Phil Eichinger <phil.eichinger@gmail.com>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default connman periodically saves network interface statistics
into an mmap'd round robin file. These are not accessible over the
D-Bus interface and the only method to interact with this is
ResetCounters() which is marked as experimental.
Continually writing statistics will increase drive wear and may not be
desirable in some devices with limited flash erase cycles, so add an
option to disable this.
Note that connman does not provide any runtime control over this
facility, it can only be disabled via the configure script.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
aplay needs alsa-lib mixer since bump to version 4.0.0 in commit
e843433e18 and
7050c9a818:
In file included from alsa-mixer.c:11:
alsa-mixer.h:16:21: error: unknown type name 'snd_mixer_t'; did you mean
'snd_timer_t'?
16 | int alsa_mixer_open(snd_mixer_t **mixer, snd_mixer_elem_t
**elem,
| ^~~~~~~~~~~
| snd_timer_t
So select BR2_PACKAGE_ALSA_LIB_MIXER instead of building aplay
conditionally to keep backward compatibility
Fixes:
- http://autobuild.buildroot.org/results/d3faac6e49fe9cc21091a5dfa44780b8c63189be
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of having the user need to figure out that 2 alsa-lib features
are needed for mpv ALSA support, have the top-level mpv option select
the relevant alsa-lib features, when alsa-lib is enabled as already done
for pulseaudio in commit 97cd3680a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of having the user need to figure out that 2 alsa-lib features
are needed for wine ALSA support, have the top-level wine option select
the relevant alsa-lib features, when alsa-lib is enabled as already done
for pulseaudio in commit 97cd3680a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of having the user need to figure out that 2 alsa-lib features
are needed for mediastreamer ALSA support, have the top-level pulseaudio
option select the relevant alsa-lib features, when alsa-lib is enabled
as already done for pulseaudio in commit
97cd3680a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
the builtin string =~ regexp operator needs to load the regex
module. This operator is used very often in zsh scripts, so
link it statically to avoid the overhead of dynamic loading.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The autoconf scripts seem to assume that no dynamic loader
is available if crosscompiling.
This results in only a small set of modules being enabled
and linked statically.
For comparison, debian patches the fallback to enable
dynamic modules (unconditionally).
This commit enables modules if shared libraries are enabled.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
this directory is used by the rpm package manager, and packages
like systemd will install "macros" for this system.
It should be deleted just like the similar
/usr/share/aclocal directory from Autoconf.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the source HWDB files are already removed from the target, it
makes little sense to keep the service around. If accidently
triggered it could create an empty database.
The service is installed in both staging and host directory as well and
not removed from there, so a user could craft his own solutions if it's
necessary to update the database.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Up to now, the source files of the hwdb was only cleaned if systemd-hwdb
was used. However, those files should only be used by the hwdb anyway --
otherwise we shouldn't clean them even when the hwdb is enabled.
Therefore, remove them even if hwdb is disabled.
hwdb files can be put in two places: /usr/lib/udev, or /etc/udev. The
former is where systemd-compliant packages would install them, but the
latter is where they were originally placed. In systemd-land, /etc
should only contain local information, so ideally it should be empty in
the rootfs.
The reality, however, is that many packages still install files in /etc.
Thus, there are probably also packages that install hwdb files in
/etc/udev.
Therefore, clean the hwdb files both in /etc/udev and in /usr/lib/udev.
Probably, we should do this cleaning even when systemd is not selected,
since non-systemd packages may install files there which are not
relevant without systemd-hwdb (or eudev). However, that's a bigger
change which needs a separate patch (and a bit more consideration).
While we're at it, get rid of the HOST_EUDEV_SYSCONFDIR variable. This
is a leftover from when udev was still extracted from the systemd
package (i.e. before eudev became a separate package).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: split in two separate commits]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
udevadm has been deprecated for a while for building the HWDB,
systemd-hwdb should be used in its place.
This tool further has a switch to generate the database in
/usr which is a better place for a one-time created file
than the default /etc/udev.
The systemd-hwdb wasn't enabled yet in the host build, so do that.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: split in two separate commits]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since many years now, /run is the standard runstate directory for Linux
systems, and Buildroot follows this standard. Encode this as the default
for autotools packages.
Note that the configure script bundled with a package may be generated
with an older version of Autotools, that may not yet support the
--runstatedir option. This will give an "Unsupported arguments" warning
and the option will be ignored. We may have better luck with passing
runstatedir as a variable instead of an option, but chances are that
the configure script doesn't know that variant either (it wouldn't print
a warning in that case). Since the warning is actually preferrable, pass
it as an option after all.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: pass as an option instead of an argument after all]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since many years now, /run is the standard runstate directory for Linux
systems, and Buildroot follows this standard. Encode this as the default
for CMake packages.
Note that we don't really care for host packages.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gdal needs json-c, not libjson, resulting in the following build failure
since the addition of the package in commit
1e64fa2956:
configure: error: could not find json-c/json.h
While at it, also drop unrecognized options:
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --without-dods-root, --without-fme, --without-grass, --without-libgrass, --without-ingres, --without-jasper, --without-charls, --without-mdb, --without-mongocxx, --without-mrsid_lidar, --without-perl
Fixes:
- http://autobuild.buildroot.org/results/f977675125167806e844a176a4c8c8873557b709
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is just a starting year in licence file now (see [1]), but
licence itself did not change.
Also fixup the spacing in the hash file to match the "new" coding
style.
[1] ed24f29e60
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
sortGrid() has been rewritten to dynamically generate stylesheets with
explicit grid-row properties to re-order the rows, instead of removing
and reinserting the cells.
Performance *should* now be comperable to sorttable.js.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Like all good problems, disparate pieces work together to create
a "synergistically" hairy mess.
The sortGrid() overhaul highlighted a flaw in pkg-stats allowing
for duplicate package class names across rows.
As an example,
boot/barebox/barebox.mk and boot/barebox/barebox/barebox.mk
both get the classname ._barebox and so sortGrid() sticks them on
the same line giving a table with a vestigal row sticking out
of the right side like some kind of appendage.
Also I neglected to add a "_" to the current version column's cells
pkgname class so instead of "._pkgname" we had ".pkgname" and so
the cells were not collected properly as part of the row.
These issues explain the formatting weirdness.
package classnames are now ".path_to_package_makefile" without suffix
(.mk) (so ._boot_barebox_barebox and ._boot_barebox_barebox_barebox
instead of ._barebox) in order to guarantee uniqueness.
and what was *accidentally*
class="centered current_version data .barebox" is now
class="centered current_version data ._boot_barebox_barebox"
just like *all* the other cells in the row. :p
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nerdctl is a CLI for containerd (package docker-containerd) which is
drop-in compatible with the Docker Daemon CLI.
This allows using the lighter weight containerd daemon directly,
instead of via the additional docker daemon. It also implements
rootless mode.
https://github.com/containerd/nerdctl
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add four new tests for systemd (rw and ro in each case):
- use dbus-broker instead of the original dbus
- use the original dbus, with dbus-broker installed
The first two extend the existing IfUpDown test cases by just enabling
dbus-broker; the second ones extend this further, by explicitly enabling
the original dbus.
For one of the tests, we overload the test_run() function to test that
the dbus-broker daemon is indeed running as root. We need not replicate
that check in the other dbus-broker-only test, and it does not make
sense to test that in tests that have the original dbus enabled.
Presence of the original dbus and dbus-broker on the same system is
valid: the original dbus is used as the default system bus daemon. We do
not test switching between the two at runtime, though as this is really
too corner-case specific. We just test to ensure the original dbus
system bus daemon is not impacted by the presence of dbus-broker.
Note: the 'full' test-case enables all systemd options, and some of them
do pull the original dbus package, so we can't use that to test the
integration of dbus-broker; instead, we extend the ifupdown case, which
does not enable the original dbus.
The default external toolchain for cortex-A9 is the old ARM toolchain
which has kernel headers 4.10 Since dbus-broker needs toolchain headers
>= 4.17, it can't be selected with this toolchain. Switch the systemd
tests to the Bootlin toolchains instead. We switch all of them to make
things easier. Note that we will need to take care in the future that
the headers version used in the bootlin toolchain doesn't get bigger
than the kernel that is used. The kernel is currently 5.10, the headers
in the bleeding edge bootlin toolchain are 5.4.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dbus-broker fits the bill as a message bus daemon, so only enable the
original dbus if dbus-broker is not enabled.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dbus-broker is an alternate implementation of a dbus daemon. It can be
used as a drop-in replacement for the system bus daemon, as well as the
session bus daemon.
dbus-broker is (basically, and as far as we're concerned in Buildroot)
split in two components:
- the actual message bus daemon, that relays messages across clients
- a launcher, which is responsible for setting various aspects of the
bus, like setting the policy et al. and opening the socket(s) the
message bus daemon will have to listen on...
The launcher can only be used in a systemd setup (it makes heavy use of
systemd facilities), while the message bus is generic. However, the
message bus daemon is useless without a launcher. There does not exist a
non-systemd launcher, which makes dbus-broker actually a systemd-only
package; this can be revisited when/if a non-systemd launcher appears.
Note, however, that libdbus is not provided by dbus-broker. People who
want to use dbus-broker as the bus daemon, and need libdbus, will have
to enable both.
If only original dbus is enabled, things stay as they are now. This is
for the moment still the default, though we should change that once
dbus-broker has proven to work.
If only dbus-broker is enabled, it installs the necessary socket
activation units and dbus configuration files. The daemon is not
launched at boot time; instead it is socket-activated when a client
connects to the bus the first time.
If both original dbus and dbus-broker are enabled, we have a conflict
with the configuration files, the socket activation file. Also, original
dbus activates the daemon as a service in multi-user.target.wants, so it
is not socket-activated and dbus-broker would never get the opportunity
to start.
Therefore, original dbus is updated to remove the conflicting files and
the activation of dbus-daemon. Since dbus-broker installs some of the
same file that original dbus removes, we have to add a dependency to
make sure that the ones installed by dbus-broker aren't removed.
If both are installed, it is still possible to revert back to using
original dbus as system bus:
- at build-time: by calling systemctl enable/disable from a
post-build script (preferred), or by providing drop-in units
or presets in an overlay (less preferred) or custom skeleton
(as a last resort),
- at runtime (on a RW filesystem): by calling systemctl
enable/disable
Note about the user: the path to the system bus socket is a so-called
"well-known location": it is expected to be there, by spec. Moving it
elsewhere is going to break existing programs. So, the user running the
system bus daemon must be able to create that socket.
As we may have two packages providing a system bus daemon, they have to
be both able to create the socket, and thus must both be able to write
in the directory containing the socket. And since they can be switched
at runtime, they must be running as the same user.
We can't just reference the original dbus user, so we duplicate the
entry. What is important, is that the user be named 'dbus', as that's
what we use in both cases.
If both original dbus and dbus-broker are selected, the dbus user is
included twice, but the specifications are identical so that's fine.
mkusers will create the user only once.
Finally, the licensing terms are pretty trivial for dbus-broker itself,
but it makes use of third-party code that it inherits as git submodules
(that are bundled in the release archive). Thus the licensing is a bit
convoluted... The third-party codes claim to be licensed as "Apache-2.0
and LGP-2.1+" in their AUTHORS files, but at the same time claim
"**Apache-2.0** OR **LGPL-2.1-or-later**" in their README files. The
individual source files (that are used) do not seem to have any
licensing header to clarify the situation. So we represent the situation
with "Apache-2.0 and/or LGPL-2.1+".
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- don't select systemd; depend on it instead
- only install config files and systemd units without original dbus
- install a user to run the message bus as
- fix licensing info
- entirely reword and extend the commit log
- add myself to DEVELOPERS as well
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout:
- Use dbus-broker as system bus if both are selected.
- Remove conflicting files from dbus installation.
- Simplify symbolic link creation.
- Add comment to remind update of session.conf and system.conf.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The 'rtl8723ds' name, when queried from release-monitoring.org at
https://release-monitoring.org/api/projects/?pattern=rtl8723ds returns
one project, with one "stable_versions" array, which is empty. This
was not expected by the pkg-stats code, causing an exception:
Task exception was never retrieved
future: <Task finished name='Task-764' coro=<check_package_latest_version_get() done, defined at /home/thomas/projets/buildroot/./support/scripts/pkg-stats:558> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 566, in check_package_latest_version_get
if await check_package_get_latest_version_by_guess(session, pkg):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 544, in check_package_get_latest_version_by_guess
projects[0]['stable_versions'][0],
IndexError: list index out of range
This commit therefore improves the checks done on the results received
from release-monitoring.org to avoid this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CSS classes are generated for each package name for sorting purposes,
However some package names start with a number and this is not allowed.
(see https://www.w3.org/TR/CSS2/syndata.html#value-def-identifier)
Fix is to prepend a character to every class name such as "_".
so every ".package" is now "._package".
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the .version-needs-update class being overridden by .correct class.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now, when BR2_CCACHE=y, ccache support was built into the
toolchain wrapper, and used regardless of whether the toolchain is
using during the Buildroot build itself, or later as part of the SDK.
However, having ccache support forcefully enabled in the SDK can
really be surprising, and is certainly unexpected for a
cross-compilation toolchain. This can be particularly surprising as
the ccache cache directory may be hardcoded in the ccache binary to
point to a folder that does not make sense on the SDK user's machine.
So what this commit does is create a BR2_USE_CCACHE variable, which
when set to 1 tells the toolchain wrapper to use ccache. Not defining
the variable, or specifying any other value that 1 causes the
toolchain wrapper to not use ccache. The main Buildroot Makefile is
modified to export BR2_USE_CCACHE = 1 when ccache support is enabled,
so that ccache is used during the Buildroot build.
However, when someone will use the SDK outside of Buildroot, the
toolchain wrapper will not use ccache.
The BR2_USE_CCACHE variable is only conditionally enabled in the main
Makefile (via ?=) so that it can be overridden in the environment if
one wants to quickly test disabling ccache in a ccache-enabled
Buildroot configuration. This is the scenario that was considered in
commit 792f1278e3 ("toolchain-wrapper:
support change of BR2_CCACHE"), which added the BR_NO_CCACHE variable.
The BR_NO_CCACHE variable is no longer needed, and replaced by this
BR2_USE_CCACHE variable.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[Thomas: almost entirely rework the implementation and commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Somewhere between binutils 2.35 and 2.37, some functionality was
added in readelf to parse more DWARF information. Unfortunately, as
reported in binutils bug
28981 ("https://sourceware.org/bugzilla/show_bug.cgi?id=28981"), this
feature causes a number of fairly scary warnings to be displayed when
running readelf on binaries built with Clang, such as the pre-built
rustc and rustdoc binaries part of the host-rust-bin package. It
looks like this:
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 2f in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10b in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10c in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Further warnings about bogus end-of-sibling markers suppressed
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: DIE at offset 0x1da refers to abbreviation number 5827 which does not exist
These warnings are caused by the readelf calls done by the
support/scripts/check-host-rpath script. The annoying thing is that
once host-rust-bin has been installed in $(HOST_DIR), this warning
appears after the installation of every single host package, because
support/scripts/check-host-rpath rescans all binaries every time.
To avoid showing those scary warnings, this commit sends the error
output of readelf to /dev/null.
Of course, it would be nicer to only filter out those warnings, but
filtering the error output without merging the error output into the
standard output is tricky, so let's keep things simple. If there is
really an error, readelf will abort.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since systemd requires a relatively new kernel, we switched to a
self-built 4.19.204 kernel. However, since then, the downloaded kernel
used by the tests has been updated to 5.10, which is certainly recent
enough to support systemd. Switch to this one. This reduces the test
time significantly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The --testcases option of run-tests says how many test cases to build in
parallel. It automatically derives a jlevel from it by dividing the
number of cores + 1 by the number of parallel testcases. However, this
will typically result in a fractional number. Make doesn't like
fractional numbers as argument to -j.
Convert the number to integer (rounding down).
* br2_jlevel is an int, as multiprocessing.cpu_count() is an int, so it
will be always >=2 (cpu_count() raises an error if it can't determine
the number of CPU, so it will always return at least 1);
* args.testcases is an int, and is checked to be >=1
So br2_jlevel + args.testcases is guaranteed to always be bigger
than or equal to args.testcases, and the division thus bigger than 1.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- ensure division provide at least 1
- drop the test below
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is useful to be able to customize the default env images in post
build scripts.
Signed-off-by: Quentin Barbe <quentin@barbe.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Given a .config with:
FOO="1234"
BAR="$(FOO)"
and then:
$(call KCONFIG_SET_OPT,FOO,azerty)
would yield a .config with just:
FOO="azerty"
because \<FOO\> would match the assignment to BAR.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The first three lines of all systemd runtime tests are identical, and
they already call into a common function. Therefore, move those lines
into the common function as well.
We need to pass an additional argument for the rootfs type. This changes
the signature, which could create confustion with
InitSystemBase.check_init() that has a different signature. Therefore,
rename the function to check_systemd(). That also allows us to call
self.check_init() directly instead of going through super().
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We currently have no internal and no external toolchain for csky.
The website is down (no https:// available, and the http:// index
page is 404).
This commit removes the architecture entry; remnants will be dropped in
followup changes.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
dust is an alternative of the command du from the Linux kernel,
written in Rust. It aims to be more intuitive and visual in order
to give the user a better view of his system's storage capacity.
Signed-off-by: Nicolas Tran <nicolas.tran@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the gdal package added, we can add optional support for gdal in
postgis. This needs a small patch, which is in fact similar to the
existing patch, just for a different part of the postgis source
code. This new patch has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GDAL is a translator library for raster and vector geospatial data
formats. As a library, it presents a single raster abstract data model
and single vector abstract data model to the calling application for all
supported formats. It also comes with a variety of useful command line
utilities for data translation and processing.
https://gdal.org/
test-pkg shows that this package is affected by binutils bug 27597.
Signed-off-by: Dominik Michael Rauh <dmrauh@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_LIBGDAL option does not exist, so drop this dead code,
and unconditionally disable GDAL support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Use explicit options
- speex is optional, not mandatory
- lirc-tools and valgrind are optional dependencies (enabled by default)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Santize filenames when files are loaded with loadAsync, to avoid "zip
slip" attacks. The original filename is available on each zip entry as
unsafeOriginalName. See the documentation.
- Drop patch (already in version)
- Update hash of license file (dual licensing clarification with
f81c2d700d)
- Update indentation in hash file (two spaces)
https://github.com/Stuk/jszip/blob/v3.10.0/CHANGES.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default sample files are installed to share/doc/Eclipse Paho C/.
The white-space can cause problems later down the line.
Therefore the path is changed to the one used by paho-mqtt-c
when configured to build the .deb package, which is share/doc/libpaho-mqtt.
Before:
Install configuration: "Release"
Installing: $(STAGING_DIR)/usr/share/doc/Eclipse Paho C/MQTTAsync_publish.c
Installing: $(STAGING_DIR)/usr/share/doc/Eclipse Paho C/MQTTAsync_publish_time.c
Installing: $(STAGING_DIR)/usr/share/doc/Eclipse Paho C/MQTTAsync_subscribe.c
After:
Install configuration: "Release"
Installing: $(STAGING_DIR)/usr/share/doc/libpaho-mqtt/MQTTAsync_publish.c
Installing: $(STAGING_DIR)/usr/share/doc/libpaho-mqtt/MQTTAsync_publish_time.c
Installing: $(STAGING_DIR)/usr/share/doc/libpaho-mqtt/MQTTAsync_subscribe.c
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with NLS raised since bump to version
16.1 in commit 6f31312964:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/lib/gcc/riscv64-buildroot-linux-uclibc/11.3.0/../../../../riscv64-buildroot-linux-uclibc/bin/ld: src/libpulsecommon-16.1.so.p/pulsecore_lock-autospawn.c.o: in function `.L0 ':
lock-autospawn.c:(.text+0x1f8): undefined reference to `libintl_dgettext'
Fixes:
- http://autobuild.buildroot.org/results/58ce701da2896125507048b29ded75cf9bcd6e35
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The MMU option is currently located in the "Toolchain" menu, but it
doesn't make sense as it's really architecture related. In addition,
the selection of MMU has an impact on the choice of binary format
available, which is visible in the architecture menu.
Therefore, this commit moves the MMU option into the architecture
menu.
However, if we simply move it in arch/Config.in, it means that we
would have the following order of options:
Target architecture
Target architecture variant
ABI
MMU
Binary format
But really, the MMU option should be right below the Target
architecture variant, and the available ABIs derived from that.
The variant and ABI are arch-specfic, and defined in the per-arch
Config.in fragments; a Kconfig option can have only one prompt defined,
even under conditions, and appears at the place in the menu where its
prompt was defined. So, there is no (easy) possibility to have a
generic option appear where we want it.
Since in fact only 2 architectures show a visible prompt for the MMU
option (RISC-V and Xtensa), we move this option in
arch/Config.in.riscv and arch/Config.in.xtensa.
Some walkthrough the commit:
- BR2_ARCH_HAS_MMU_MANDATORY and BR2_ARCH_HAS_MMU_OPTIONAL are
removed as they are no longer needed
- BR2_USE_MMU becomes a hidden boolean
- All the places where we used to select BR2_ARCH_HAS_MMU_MANDATORY
now select BR2_USE_MMU directly.
- Introduce BR2_RISCV_USE_MMU and BR2_XTENSA_USE_MMU.
- All defconfigs that used "# BR2_USE_MMU is not set" are switched to
using the new option.
All in all, this simplifies things quite a bit, and allows to have a
good option ordering in the Target architecture menu.
This commit might raise a concern in terms of backward compatibility
with existing configurations. The only configurations that will be
broken by this change are RISC-V noMMU (which was very recently
introduced) and Xtensa noMMU (which we can probably agree is not such
a widely popular configuration).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
[yann.morin.1998@free.fr:
- expand further why we need per-arch MMU options
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Many of the build options depend on the toolchain configuration. In
addition, it's pretty logical that you select first target architecture,
then the toolchain, and only then things like debug and pic/pie.
Therefore, move the "Toolchain" menu before the "Build options" menu
instead of after.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, glibc depends on !BR2_STATIC_LIBS in all the toolchain
variants.
However, for some architectures, glibc is the only supported libc. In
commit 3b3105328e ("Config.in: only
allow BR2_STATIC_LIBS on supported libc/arch"), we implemented a fix
to avoid configurations were BR2_STATIC_LIBS=y with an architecture
already supported by glibc, because these configurations are
impossible. This commit 3b3105328e
prevents from selecting BR2_STATIC_LIBS=y when the C library used for
the internal toolchain backend is glibc.
However, it introduces a discrepency between how this topic is handled
for internal and external toolchains:
- For internal toolchains, we prevent BR2_STATIC_LIBS=y if glibc is
chosen.
- For external toolchains, we allow BR2_STATIC_LIBS=y in all cases,
and it's each glibc toolchain that has !BR2_STATIC_LIBS
This commit addresses this discrepency by preventing BR2_STATIC_LIBS=y
if glibc is chosen in all cases.
Thanks to this, we can remove the !BR2_STATIC_LIBS dependency on both
the glibc package, and all glibc external toolchains.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=14256
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: update to master, fix the gen-bootlin-toolchains script, add
a comment in the static/shared choice to indicate that static is
supported only with uclibc or musl]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Right now the "Target options" menu looks like this:
Target architecture (....)
... options related to the binary format selection ...
... options related to the architecture variant selection ...
This doesn't make much sense: the architecture variant selection
should be just below the target architecture selection. With this
commit, things will now be presented this way:
Target architecture (....)
... options related to the architecture variant selection ...
... options related to the binary format selection ...
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We recently had several cases of architecture configurations for which
no C library was available, leading to a build failure during the gcc
build. In order to more easily detect those bogus configurations,
let's bail out very early by detecting the lack of C library
selection.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- move as final else clause in existing conditional block
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Even though that seems weird, the LP64F ABI is only supported when MMU
support is enabled. Indeed, as per commit
9a51381ced ("package/uclibc: prevent
config with unsupported RISC-V float ABI"), uClibc does not support
LP64F. But uClibc is the only C library that support RISC-V 64-bit
noMMU.
So the selection of LP64F and !MMU is impossible. Right now this
selection causes a build failure as no C library is enabled.
This commit fixes this by ensuring we cannot use LP64F when MMU
support is not available.
Fixes:
http://autobuild.buildroot.net/results/6320dcc655f1871eb8bf6a9689bddde7447385f5/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Users may want to use buildkitd and buildkitctl to build images on the host.
Adds package host-moby-buildkit and BR2_PACKAGE_HOST_MOBY_BUILDKIT.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of having the user need to figure out that 2 alsa-lib features
are needed for pipewire ALSA support, have the top-level pulseaudio
option select the relevant alsa-lib features, when alsa-lib is enabled
as already done for pulseaudio in commit
97cd3680a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though opencl-clhpp's build does not need libopencl, as it's just
made of headers, any user of opencl-clhpp will assume libopencl is
already installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the major release changed I've built successfully all packages that
have direct dependency to harfbuzz:
- efl
- libass
- mupdf
- pango
- qt5base
- sdl2_ttf
- supertuxkart
- vlc
- webkitgtk
- wpewebkit
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
diffutils is now a host system dependency, so there is no need for
opkg-utils to depend on host-diffutils.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cmp from diffutils is part of the host system requirements, so check
for it. It is used in package/pkg-generic.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The command `cmp` is used by `package/pkg-generic.mk` at commit
8623cc5deb. This command is provided by `diffutils`, so it should be
installed on the host system.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The host-libcurl was initially added for host-cargo, but it is no
longer used, so we can remove it.
This reverts commit 736e0fc5d6.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable cmocka (enabled by default) to avoid the following uclibc build
failure raised since the addition of the package in commit
8aaa7ecbce:
In file included from p11test_common.h:30,
from p11test_helpers.h:25,
from p11test.c:24:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/cmocka.h:2334:47: error: unknown type name 'va_list'
2334 | void vprint_message(const char* const format, va_list args) CMOCKA_PRINTF_ATTRIBUTE(1, 0);
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/19d1171a76cd4789472b16aa24b44f58cd7e0a1e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of having the user need to figure out that 3 alsa-lib features
are needed for pulseaudio ALSA support, have the top-level pulseaudio
option select the relevant alsa-lib features, when alsa-lib is
enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When changing permissions on all directories in the staging directory,
after copying sysroot, paths that contain spaces break the call to
chmod.
With -print0 for find and -0 for xargs white spaces are correctly
interpreted.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is based on earlier work from Łukasz Stelmach
<l.stelmach@samsung.com> to add support for different page sizes on
ARM64.
In his initial submission, Łukasz took an approach similar to this
one, i.e make it ARM64-specific. Following the feedback on the mailing
list, his second version [1] tried to generalize the logic to
configure the page size between architectures. But the general
consensus during the review process was that there wasn't much to
generalize in the end.
So, this new iteration is back to a simpler approach:
* We have new options in Config.in.arm to configure the page
size. Only 4 KB and 64 KB are supported, because our testing in
Qemu and real hardware has not allowed to get a successful setup
for 16 KB pages. We can always re-add support for 16 KB later if
that is resolved.
* The logic to define the ARCH_TOOLCHAIN_WRAPPER_OPTS options is
moved from the ARC-specific file to arch/arch.mk, and extended to
cover ARM64.
* The appropriate logic in uclibc.mk and linux.mk is added to tweak
the relevant configuration options.
* A test case is added in the runtime test infrastructure to test
building and booting under Qemu a 64 KB configuration, with all 3 C
libraries.
For the regular configuration of 4 KB pages, this commit makes one
functional change: on ARM64, -Wl,-z,max-page-size=4096 is now passed in
the compiler flags of the wrapper.
[1] https://patchwork.ozlabs.org/project/buildroot/list/?series=275452
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
So far, BR2_UCLIBC_TARGET_ARCH had a value for all
architectures... except for ARM64. Its value is passed as ARCH= when
building uClibc... which is currently empty:
/usr/bin/make -j33 -C .../build/uclibc-1.0.41 ARCH="" CROSS_COMPILE=".../host/bin/aarch64-buildroot-linux-uclibc-"
And also in uclibc.mk, when we inject the architecture in uClibc's
.config:
$(call KCONFIG_ENABLE_OPT,TARGET_$(UCLIBC_TARGET_ARCH))
$(call KCONFIG_SET_OPT,TARGET_ARCH,"$(UCLIBC_TARGET_ARCH)")
We enable TARGET_ (which doesn't exist) and set TARGET_ARCH to the
empty string.
Nobody noticed so far, and it happens to work because aarch64 is the
first architecture in the choice of architectures in
extra/Configs/Config.in in the uClibc code. So, when the architecture
is not specified, aarch64 is used.
As we are about to add some logic in uclibc.mk that will use
BR2_UCLIBC_TARGET_ARCH, we noticed this missing definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When compiling Qt6 applications for the target, CMake needs to have
two variables defined to find the host installation of Qt. These two
variables are unconditionally defined, regardless of whether Qt6 is
enabled in the configuration or not, as they do no harm when Qt6 is
not present/used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit proposes a very minimal package for qt6base. It only
supports building QtCore, so it *really* is minimal. But that's a
starting point, which we can progressively build on top. It is based
on initial work from Peter Seiderer.
This minimal QtCore build is however sufficient to build and run
simple non-graphical Qt applications.
A number of comments:
- Even though there's only qt6base for now, many other qt6 modules
will come later on, which is why we're using the same structure as
for qt5, with a subdir for package/qt6/
- Qt6 is mutually exclusive with Qt5. Even though the library names
on the target and the location of the header files are distinct,
the host tools (qmake, moc and al.) have the same name, so at least
for now, we make them mutually exclusive.
- We've chosen to use non-bundled libraries for zlib, bb2,
double-conversion and pcre2, for both the target and the host
qt6base packages.
- Contrary to qt5 where the target package was building the host
tools, now we have a host qt6base package building the host tools,
and which is needed as a dependency for the target qt6base package.
- qt6base is using CMake. However, it strongly recommends to use
Ninja as a backend instead of make, a recommendation that we follow
in this commit. Since we don't have support for Ninja in the
cmake-package infrastructure (yet), we do this manually in
qt6base.mk itself, by passing -Gninja to CMake at configure time,
and then by using cmake --build at build time and cmake --install
at install time, using explicitly provided build and install
commands. Hopefully these can go away once we have support for
Ninja directly in cmake-package.
- We disable a number of features or external libraries using FEATURE
options. However, because there are over 400 FEATURE options in
qt6base, we didn't go all the way to explicitly disabling *all* of
them (which would be needed for both the host and target
packages). We expect that this list of explicit FEATURE options
disabling will need to grow based on the feedback of users and
issues encountered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This will be needed by qt6base, and it is not worth creating a hidden
host package option for this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Both the target and host variants of this package will be needed for
qt6base.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Both the target and host variants of this package will be needed by
qt6base.
Our reading of double-conversion/utils.h in the code base seems to
show that all architectures currently supported in Buildroot (to the
exception of csky, which we intend to remove, and is anyway not
usable/testable today) are supported by double-conversion.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It should be possible to compile ARM_TRUSTED_FIRMWARE without u-boot or EDK2.
For example, one might want to produce "bl31.bin" for use as an init stub for
the Raspberry Pi 4.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While we're at it, update URL to https instead of ftp.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, this option doesn't do anything. It only adds
--enable-plugins --enable-lto to the configure flags, but doesn't
disable them if it is not set. Since both of these default to enabled,
plugins and lto are effectively always enabled.
There really is no need to make this configurable: it adds a bit of size
and build time to host-gcc, but we don't care about that for host tools.
It's still up to individual builds to enable the LTO options.
Therefore, remove the option entirely. For clarity, explicitly pass
--enable-plugins --enable-lto to configure.
No legacy handling is added for the removed option. Since the behaviour
hasn't actually changed (independently of whether the option was enabled
or not), there's no point bothering the user with a legacy option.
elf2flt was linking with libdl depending on this option. Since the
option doesn't do anything, this is probably not needed. Still, to avoid
breaking things, and because linking with libdl doesn't cost us anything
anyway, always link with libdl.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, this option doesn't do anything. It only adds
--enable-plugins --enable-lto to the configure flags, but doesn't
disable them if it is not set. Since both of these default to enabled,
plugins and lto are effectively always enabled.
There really is no need to make this configurable: it adds a bit of size
and build time to host-binutils, but we don't care about that for host
tools. It's still up to individual builds to enable the LTO options.
Therefore, remove the option entirely. For clarity, explicitly pass
--enable-plugins --enable-lto to configure.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_GCC_ENABLE_LTO only enables LTO in the toolchain, not in packages.
Use BR2_ENABLE_LTO instead to enable it in packages as well.
Note that BR2_GCC_ENABLE_LTO is currently non-functional (LTO is still
enabled in the toolchain even if it's not set), so we *do* have LTO
available in the toolchain.
Note that the option has no effect at all on these defconfigs anyway,
since they don't contain any package that is affected by the
BR2_ENABLE_LTO option. Still, it makes sense to enable it for these
really memory-constrained targets for when packages are added.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_GCC_ENABLE_LTO controls whether or not LTO is available in the
(internal) toolchain - it shouldn't be used to control whether packages
are built with LTO. Use the new BR2_ENABLE_LTO option instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages have a configure option to enable LTO. Add a global option
to enable/disable this in packages.
Note that we could instead (or in addition) pass -flto directly to the
compiler in the toolchain wrapper, but that has a *much* bigger impact,
so for the time being let's not do that.
No toolchain dependency is added for this, because all toolchains now
support LTO.
- LTO support was merged in GCC years before 4.6 (our minimal version)
was released.
- Our oldest external toolchain, Sourcery ARM 2014.05, has LTO support.
- For our internal toolchains, it is supposedly regulated by
BR2_GCC_ENABLE_LTO. However, that option only *enables* it - it
doesn't disable LTO support when it's not provided. Since LTO support
defaults to enabled for a long time already in GCC, in practice all
Buildroot-generated toolchains do support LTO.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until recent releases GNURadio was shipped with volk as a
submodule. Even though we still use 3.8.x, with the newer 3.9 and
3.10, volk is no longer available as a submodule, and it is needed to
build it separately.
In order to prepare for this, this patch disable the internal volk,
and adds a dependency to the corresponding package, to use
unconditionnaly the one built by Buildroot.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
FreeRADIUS is an open source server which implements
a protocol for remote user Authorization, Authentication
and Accounting.
There are many modules. All modules without dependencies are enabled.
The modules with a dependency that we have are automatically enabled if
the dependency is enabled. Modules with dependencies we don't support
are explicitly disabled.
The configure script always looks in host directories for libraries, so
it is essential to explicitly disable everything that is not actually
provided.
Signed-off-by: David GOUARIN <dgouarin@gmail.com>
Signed-off-by: Kalpesh Panchal <kalpesh.panchal@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@collins.com>
[Arnout:
- remove second patch, superseded by other patches;
- add upstream links to patches;
- add more patches to avoid looking in host directories;
- explicitly add dependency on !static inherited from talloc (redundant
with glibc, but future-safe);
- simplify Config.in comment;
- check hash with PGP signature;
- add conf opts for runtime paths;
- add conf opts to disable unsupported modules;
- add more optional dependencies;
- enable/disable all modules that use a dependency;
- search defaults file in /etc/default, not /etc/sysconfig.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The toolchain for powerpc spe can use uClibc-ng without thread support.
So we need the same fix as commit [1].
[1] fff68f75b3
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the version bump to 22.x, the dri.pc file was no longer deployed as
it was believed to not be provided.
While it was temporarily missing from upstream as part of deprecating
the classic driver, it was reintroduced prior to the 22.0 release via:
3ae3569d82
This file is still necessary to build Xorg server. See previous commits:
9014c21cac7468b60e7c
Fixes: 6c25d1099 ("package/{mesa3d, mesa3d-headers}: bump version to 22.1.3")
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit [1] removed the Config.in.host file and moved the arm, sh,
sparc, xtensa and riscv-64 architectures dependencies. But this list
doesn't contain all elf2flt supported architectures and this breaks
the host-gcc-initial build for m68k.
Since BR2_BINFMT_FLAT is only available on no MMU case, we can rely on
BR2_USE_MMU option and remove the architecture list.
Note: SH without MMU support has been removed by [2], sparc requires
an MMU since at least [3].
Fixes:
http://autobuild.buildroot.net/results/15d62edfc4b54c0b40b9d3961b797bce4e307919/
[1] 9db5eb258c
[2] 04ea3d38dd
[3] 29563047e0
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit fd839aeb7f ("package/glibc:
introduce and use BR2_PACKAGE_GLIBC_ARCH_SUPPORTS and
BR2_PACKAGE_GLIBC_SUPPORTS") we moved the Config.in logic about glibc
dependencies from toolchain/toolchain-buildroot/Config.in into
package/glibc/Config.in.
Unfortunately, it is not possible to move the Config.in comments that
tell the user, within the choice..endchoice for the C library why
glibc is not currently selectable, so we had to keep them in
toolchain/toolchain-buildroot/Config.in.
Turns out that the comments were out of sync with the dependencies,
and two comments were missing. This commit adds the missing ones, and
adds a comment in package/glibc/Config.in explaining that we need to
be careful about updating toolchain/toolchain-buildroot/Config.in as
well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without C++ raised since bump to version
16.1 in commit 6f31312964:
../output-1/build/pulseaudio-16.1/meson.build:1:0: ERROR: Unknown compiler(s): [['/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++']]
The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-1/output-1/per-package/pulseaudio/host/bin/powerpc64-buildroot-linux-gnu-g++'"
Fixes:
- http://autobuild.buildroot.org/results/6526a21bd4da3b8458188f27c1ec04c381e4b673
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit ef321ff4a9 ("package/avocado:
new package") the license information that was introduced was
incorrect. The license is GPL-2.0, not Apache-2.0.
According to the LICENSE file:
Most files in Avocado are released under the GPLv2 with a "and any later
version" clause (GPLv2+), but some files are explicitly bound to the
version 2 of the license and therefore that's the official license of
the project itself. The header on each individual file contains
information about the GPL version that applies to it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only display the output of compileall.py when running verbosely,
otherwise suppress all non-error output.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enable RIPEMD160 in openssl to avoid the following build failure raised
since the addition of the package in commit
8aaa7ecbce:
/nvmedata/autobuild/instance-17/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: pkcs11_tool-pkcs11-tool.o: in function `sign_verify_openssl.constprop.0':
pkcs11-tool.c:(.text+0x6b00): undefined reference to `EVP_ripemd160'
Fixes:
- http://autobuild.buildroot.org/results/6dc5baa2cfb037431b9ede9f2e0c5705957ee3bf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Arnout: don't remove original author from the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Adds support for Linux kernel 5.17.
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since version 0.22 mpd provides an option to use the io_uring kernel interface
for asynchronous access to local files. Buildroot has the necessary library
(package/liburing) since commit 03ca6f4e39.
Add an optional dependency on liburing to enable asynchronous file access using
the kernel io_uring interface.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump to the latest commit hash as of 2022-07-25.
Fixes the build against kernel 5.18.x and GCC 12 and ARM64.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The filename was changed from bootloader-BEAGLEV to bootloader-JH7100, update
the documentation for the beaglev board as well.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
shellcheck is already in use to check SysV init scripts.
Currently its results can be affected by the existence of a
.shellcheckrc file in any parent directory.
For instance, in this example:
(1) /path/.shellcheckrc
(2) /path/to/.shellcheckrc
(3) /path/to/buildroot
the configs from file (1) are ignored and the configs from file (2)
override the default values from the shellcheck binary.
So the config file affects the check-package result for SysV scripts.
Avoid this reproducibility issue by adding an empty config file to the
buildroot topdir.
It can also eventually contain configs (different from default values
from sheelcheck) that we want as a standard to all shell scripts tested
by check-package.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Zeek Network Security Monitor
Zeek is a powerful network analysis framework that is much different
from the typical IDS you may know. (Zeek is the new name for the
long-established Bro system.)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout:
- select python3 instead of depends;
- patch python path in post-patch instead of post-install]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
host-libpcap is needed to build host-zeek. It is not actually used for
anything, so we can disable all features.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump of autoconf to version
2.71 in commit ecd54b65c1:
checking for glob.h... no
configure: error: glob.h not found.
configure:5207: checking for glob.h
configure:5230: /data/buildroot-autobuilder/instance-0/output-1/host/bin/mips64el-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -pthread -fno-strict-aliasing -fno-strict-overflow -flto -Wall -Wextra -Wstrict-prototypes -Wno-parentheses -Wno-pointer-sign -Wno-missing-field-initializers -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pthread -flto=4 -g conftest.c >&5
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: /tmp/ccDboxph.ltrans0.ltrans.o:(.debug_info+0x2a): undefined reference to `conftest.c.0943dc99'
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: /tmp/ccDboxph.ltrans0.ltrans.o:(.debug_info+0x2f): undefined reference to `conftest.c.0943dc99'
This is the same problem that we tried to fix in
03c148c8de by adding AUTORECONF = YES.
The analysis made back then is probably not entirely correct - the issue
only seems to occur with GCC8, not with any earlier or later version,
which hints at a compiler bug. Since the error involves some
LTO-generated functions, the trigger is probably the -flto=4.
Whatever the exact issue is, it is avoided if we make sure that our
CFLAGS replace the default ones instead of being added to them.
Currently, they are added because the configure script doesn't properly
detect that CFLAGS was set.
Add a patch (sent upstream months ago, but it didn't appear in the
release that has been done since then) that makes sure CFLAGS is
properly detected.
Fixes:
- http://autobuild.buildroot.org/results/d7aab7df196e0f6d6389b87ff29da7c2971e6b6d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When we use the statistics output to generate a CVE/CPE customer
report showing whether a product is affected by CVEs, we are primarily
interested in whether they are relevant to the target
system. Currently we cannot see if the package is configured for the
build (infra==host) and/or the target system (infra==target).
Therefore this commit extends the pkg-stats script to leverage the
information available in "make show-info" output to tweak the list of
package infrastructures for each package. Thanks to this commit, the
script now has a more consistent behavior:
* When pkg-stats is run without -c, i.e without a defined Buildroot
configuration, it continues to operate as it did, i.e it lists all
package infrastructures supported by the package (such as autotools
host+target, or kconfig target, etc.)
* When pkg-stats is run with -c, i.e with a defined Buildroot
configuration which defines the list of packages that should be
considered, then for each package it now lists only the package
infrastructures used by the package in that current
configuration. For example if you have a package with a host and
target variant, but only the host variant is used in your
configuration, now the pkg-stats output will only say that the host
variant of this package is used;
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[Thomas: pretty much rework the entire implementation and how the
result is presented.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Arnout:
- alphabetically order DEVELOPERS;
- license is OR, not AND]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure when host root directory is /usr which
is raised since bump to version 2.2.0 in commit
caa32ac237:
/usr/bin/install -c -m 644 syslog.lua '/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/target/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/usr/share/lua/5.3/logging'
libtool: install: /usr/bin/install -c .libs/lsyslog.so /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/target/usr/lib/lua/5.3/lsyslog.so
libtool: install: /usr/bin/install -c .libs/lsyslog.lai /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/target/usr/lib/lua/5.3/lsyslog.la
libtool: warning: remember to run 'libtool --finish /usr/lib/lua/5.3'
/usr/bin/make install-exec-hook
make[3]: Entering directory `/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/luasyslog-2.2.0'
rm -f /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/target/usr/lib/lua/5.3/lsyslog.la
make[3]: Leaving directory `/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/luasyslog-2.2.0'
make[2]: Leaving directory `/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/luasyslog-2.2.0'
make[1]: Leaving directory `/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/luasyslog-2.2.0'
luasyslog: installs files in /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/target//usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1
This failure is raised because lua script directory is "found" and
"fixed" to
${prefix}/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/usr/share/lua/5.3
because of the following test in ax_lua.m4:
dnl Try to find a path with the prefix.
_AX_LUA_FND_PRFX_PTH([$LUA], [$ax_lua_prefix], [package.path])
AS_IF([test "x$ax_lua_prefixed_path" != 'x'],
[ dnl Fix the prefix.
_ax_strip_prefix=`echo "$ax_lua_prefix" | sed 's|.|.|g'`
ax_cv_lua_luadir=`echo "$ax_lua_prefixed_path" | \
sed "s,^$_ax_strip_prefix,$LUA_PREFIX,"`
])
Fixes:
- http://autobuild.buildroot.org/results/09fa6dd9844d6d4694801ec59434dad7a56bf290
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The KCONFIG_ENABLE_OPT is intended to enable a required kernel configuration
option when a package requires it.
However, this will often override an existing enabled module with `=m` with `=y`
which overrides the module to be built-in instead of separate.
This is undesirable behavior; we often want these as `=m` and not `=y` to reduce
the size of the kernel image.
This patch changes KCONFIG_MUNGE_DOT_CONFIG to prevent changing `=m` to `=y`.
Signed-off-by: Christian Stewart <christian@paral.in>
Co-authored-by: TIAN Yuanhao <tianyuanhao3@163.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- drop || exit 1, it is superfluous
- don't change the match in the SED (just append &&)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
- https://bugs.busybox.net/show_bug.cgi?id=13796
.../host/arm-linucleus-linux-gnueabihf/sysroot/usr/include/gstreamer-1.0/gst/gl/glprototypes/gstgl_compat.h:40:18: error: conflicting declaration ‘typedef void* GLsync’
40 | typedef gpointer GLsync;
| ^~~~~~
.../host/arm-linucleus-linux-gnueabihf/sysroot/usr/include/qt5/QtGui/qopengles2ext.h:24:26: note: previous declaration as ‘typedef struct __GLsync* GLsync’
24 | typedef struct __GLsync *GLsync;
| ^~~~~~
File gstgl_compat.h:
39 #if !GST_GL_HAVE_GLSYNC
40 typedef gpointer GLsync;
41 #endif
File qopengles2ext.h:
1 #ifndef __gles2_gl2ext_h_
2 #define __gles2_gl2ext_h_ 1
3
4 #if 0
5 #pragma qt_no_master_include
6 #pragma qt_sync_skip_header_check
7 #pragma qt_sync_stop_processing
8 #endif
9
10 #ifdef __cplusplus
11 extern "C" {
12 #endif
13
14 #ifndef __gl3_h_
15 /* These types are defined with reference to <inttypes.h>
16 * in the Apple extension spec, but here we use the Khronos
17 * portable types in khrplatform.h, and assume those types
18 * are always defined.
19 * If any other extensions using these types are defined,
20 * the typedefs must move out of this block and be shared.
21 */
22 typedef khronos_int64_t GLint64;
23 typedef khronos_uint64_t GLuint64;
24 typedef struct __GLsync *GLsync;
25 #endif
The problem is that rpi-userland doesn't define GLsync, and both
GStreamer and Qt have their own definition of GLsync in this case, but
they are not the same.
We reported this issue to:
* rpi-userland, to get the headers updated:
https://github.com/raspberrypi/userland/issues/469#issuecomment-1193864294
* gstreamer, to get their bogus definition of GLsync fixed:
https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/973
In the mean time, fix this by adding the missing definitions to
rpi-userland, so that GStreamer and Qt don't try to provide their own.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These firmware files are also applicable to some Riscv hosts.
Simply remove the architecture dependency. The intention was to only
show it for RaspberryPi, but that's half-baked anyway.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Christian Stewart <christian@paral.in>
[yann.morin.1998@free.fr:
- drop unneeded _BIN_NAME and _INSTALL_BINS
- s/OCP/OCI/
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since qt 5.12, quick demos are moved in the qt5doc package.
In order to use quick demos, qt5doc has to be built.
qt5doc is a bit misleading name for the package, while it's
basic content are the quick demos. qdoc tool itself is a part
of qt5tools.
The examples need to be enabled for this package to do anything (because
we don't build the docs themselves), so select it
Signed-off-by: Goran Rađenović <gradenovic@ultratronik.de>
[Arnout:
- fix check-package warnings;
- update to Jan 31 2022 version of kde/5.15 branch;
- add select of BR2_PACKAGE_QT5BASE_EXAMPLES;
- add hash for license file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following static build failure raised since the addition of the
package in commit 02ea01ea22:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/i586-buildroot-linux-musl/sysroot/usr/lib/libreadline.a(display.o): in function `_rl_move_cursor_relative':
display.c:(.text+0xbb5): undefined reference to `tputs'
Fixes:
- http://autobuild.buildroot.org/results/77c/77c10947ddc749c54c7c233e3143f5cdf1edc73d/build-end.log
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
hyperfine is a benchmark tool written in Rust. It evaluates
execution time of a command passed in arguments and make
a relative comparison if multiple arguments are used at the
same time.
It can be convinient for purposes of Rust-written systems as
it runs in a stable version of Rust.
The package has been checked with correct formatting and
without typos:
./utils/check-package package/hyperfine/*
A CI test was run on gitlab.com to verify toolchain compatibilities.
Signed-off-by: Nicolas Tran <nicolas.tran@smile.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As upstream enables CONFIG_BATMAN_ADV_BATMAN_V option since
2018.2 by defaullt ([1]) honor this in buildroot and do
the same (and remove the legacy experimental comment accordingly -
although upstream docs still mention it as legacy, that's really an
oversight, the community considers it the go-to protocol for years now).
[1] https://git.open-mesh.org/batman-adv.git/blob/HEAD:/CHANGELOG.rst#l174
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed patch (and autoreconf) which was commited upstream:
f227f2f286
COPYING hash changed because of a spelling fix: MERCHANTIBILITY ->
MERCHANTABILITY. Note that the latter is also the spelling used in the
official MIT license.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed backported patch which is now included in this release.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Buildroot currently has all of the needed packages to use Mender as the primary
update system. However, there isn't any documentation or examples now that
provide a starting point for users. This lack of documentation makes setting up
a Mender based update system difficult and time-consuming.
Provided in this patch series is a mender_x86_64_efi_defconfig of which sets up
an x86_64 EFI based build that is ready to flash to a USB pen drive or use in a
QEMU environment. The system partition schema comprises of two equally sized
root partitions and a data partition that mounts to /var/lib/mender as a
persistent data store partition.
There is a board/mender/readme.txt provided, which gives users documentation on
how to flash the built image or boot the image using QEMU as well.
The post-build and post-image-efi scripts also have four options:
-a --artifact-name:
- The name of the artifact, this is added to /etc/mender/artifact_info
-o --data-part-size:
- The data partition size.
-d --device-type
- The device-type used by mender to catagorize registered devices.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Mikael Bourhis-Cloarec <mikael.bourhis@smile.fr>
[Romain: rebase on master (01.2022)
- update genimage-efi.cfg to use GPT partition table and genimage-15 syntax
- bump the kernel to 5.15.13
- Add host-libelf kernel dependency
- Use BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI after commit 82d1e8c628
(boot/grub2: use none platform when building for host)
- Add regexp grub mandatory module for mender-grubenv
- remove startup.nsh from genimage-efi.cfg after commit 3efb5e31fc
(board, boot, package: remove usage of startup.nsh in EFI partition)]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Arnout:
- abbreviate sizes and partition uuids, remove implicit ones in genimage.cfg
- change data partition uuid to Linux (instead of x86_64 rootfs)
- fix whitespace and shellcheck errors in scripts
- remove --generate-mender-image option, always create it
- remove empty directory and -O ^64bit when creating data fs
- remove redundant e2fsck
- add -serial stdio option to qemu call
- update kernel to current stable 5.18.14
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Upstream makes releases very irregularly; our current version is already
two years old and upstream HEAD contains a lot of fixes. Therefore:
- Bump to the current HEAD SHA1
- Remove patches applied to upstream
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for libsafec can not be completely disabled - currently,
--disable-safec does not exactly allow for compiling libest on
systems without libsafec, but instead just uses bundled copy of
library from safe_c_stub/
To avoid that, do automatically select the full-featured safeclib
package and always use --with-system-libsafec
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Version 2.3.4 of libtalloc needs to define PYTHONHASHSEED, as a check has been added
to the configure script, and build will fail if it is not defined.
This is originately a workaround by samba developpers meant to avoid rebuilding talloc
with each call to make. Defining PYTHONHASHSEED would not be required in the context
of builroot, if not for the check in the configure script.
Signed-off-by: David GOUARIN <david.gouarin@thalesgroup.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop minnowboard_max-graphical_defconfig from DEVELOPERS as it has been
removed by commit b9bc22ee8a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop 'from' in comment of Config.in which was added by commit
00deb6a7c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patch which is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In GStreamer commit 0a657d6db5ba912b13092a907ea507638cd01cf9, merged
in Gstreamer 1.19.x, the GstAppSinkCallbacks structure was extended
with another field calle new_event. This requires an update in the
WebKit code, without which we have a build failure:
platform/audio/gstreamer/AudioFileReaderGStreamer.cpp:234:5: error: braces around scalar initializer for type ‘gboolean (*)(GstAppSink*, gpointer) {aka int (*)(_GstAppSink*, void*)}’
There are no autobuilder failures, but the issue could be reproduced
using the following defconfig:
BR2_arm=y
BR2_cortex_a8=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5WEBKIT=y
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
[Thomas: find the actual upstream fix and use that, improve the
explanation about the issue in the commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No release announcement available from upstream this time so we had to
computed the tarball hash ourselves.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop BUILD_HACKRF_TOOLS which has never been recognized since the
addition of the package in commit
29b7cc88f4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Single hyphen commands has been removed since Mender 3.0.0 [1]
The hyphen was added back while fixing check-pkg and shellcheck warnings [2]
[1] fd838ec1b0
[2] 0b350cf756
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It's been ages (5 years at the next release) that we've not installed
host packages in $(HOST_DIR)/usr, but we still have a few packages that
reference it or install things in there.
Drop all of those in one fell swoop.
The run-time test still succeeds, and the following defconfig, which
should exercise all touched packages [*], does build:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
BR2_PACKAGE_GAWK=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_ABOOTIMG=y
BR2_PACKAGE_DBUS_PYTHON=y
BR2_PACKAGE_OLA=y
BR2_PACKAGE_JIMTCL=y
BR2_PACKAGE_LUA=y
# BR2_PACKAGE_LUA_32BITS is not set
BR2_PACKAGE_ARGPARSE=y
BR2_PACKAGE_PERL=y
BR2_PACKAGE_PHP=y
BR2_PACKAGE_PHP_APCU=y
BR2_PACKAGE_PHP_LUA=y
BR2_PACKAGE_PHP_PAM=y
BR2_PACKAGE_PHP_PECL_DBUS=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON_CRYPTOGRAPHY=y
BR2_PACKAGE_PYTHON_PLY=y
BR2_PACKAGE_PYTHON_PYBIND=y
BR2_PACKAGE_LIBVA=y
BR2_PACKAGE_BIND=y
BR2_PACKAGE_BIND_SERVER=y
BR2_PACKAGE_BIND_TOOLS=y
BR2_PACKAGE_APPARMOR=y
BR2_PACKAGE_APPARMOR_BINUTILS=y
BR2_PACKAGE_APPARMOR_UTILS=y
BR2_PACKAGE_APPARMOR_UTILS_EXTRA=y
BR2_PACKAGE_APPARMOR_PROFILES=y
BR2_PACKAGE_REFPOLICY=y
BR2_PACKAGE_URANDOM_SCRIPTS=y
BR2_PACKAGE_BASH=y
# embiggen-disk to exercise go
BR2_PACKAGE_EMBIGGEN_DISK=y
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_I386_PC=y
BR2_TARGET_GRUB2_I386_EFI=y
[*] exceptions:
- zfs was not tested: it needs a kernel to be built;
- compiler-rt was not tsted: it needs llvm to be built, that takes
ages, and other packages already reference the correct location for
llvm-config, so it was assumed that is OK.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Anisse Astier <anisse@astier.eu>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Christian Stewart <christian@paral.in>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Guillaume William Brs <guillaume.bressaix@gmail.com>
Cc: Hervé Codina <herve.codina@bootlin.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Cc: Julien Olivain <ju.o@free.fr>
Cc: Matt Weber <matthew.weber@collins.com>
Cc: Nicolas Carrier <nicolas.carrier@orolia.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
---
Changes v1 -> v2:
- fix new instance that have crept in (Romain)
Commit d69d40c029 (package/rustc: add support for Tier 1 and Tier 2
platforms) misspelled the config options for i586 and i686.
They are BR2_x86_i586 and BR2_x86_i686, not BR2_i586 or BR2_i686.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
---
Changes v1 -> v2:
- in commit log: s/BR2_i386_/BR2_x86_/g (Baruch)
- Fix CVE-2021-43306: An exponential ReDoS (Regular Expression Denial
of Service) can be triggered in the jquery-validation npm package,
when an attacker is able to supply arbitrary input to the url2 method
- Fix CVE-2022-31147: The jQuery Validation Plugin (jquery-validation)
provides drop-in validation for forms. Versions of jquery-validation
prior to 1.19.5 are vulnerable to regular expression denial of service
(ReDoS) when an attacker is able to supply arbitrary input to the url2
method. This is due to an incomplete fix for CVE-2021-43306. Users
should upgrade to version 1.19.5 to receive a patch.
- Use LICENSE.md instead of README.md which is available since version
1.14.0 and
96b7036eb4https://github.com/jquery-validation/jquery-validation/releases/tag/1.19.4https://github.com/jquery-validation/jquery-validation/releases/tag/1.19.5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix CVE-2022-2309: NULL Pointer Dereference allows attackers to cause a
denial of service (or application crash). This only applies when lxml is
used together with libxml2 2.9.10 through 2.9.14. libxml2 2.9.9 and
earlier are not affected. It allows triggering crashes through forged
input data, given a vulnerable code sequence in the application. The
vulnerability is caused by the iterwalk function (also used by the
canonicalize function). Such code shouldn't be in wide-spread use, given
that parsing + iterwalk would usually be replaced with the more
efficient iterparse function. However, an XML converter that serialises
to C14N would also be vulnerable, for example, and there are legitimate
use cases for this code sequence. If untrusted input is received (also
remotely) and processed via iterwalk function, a crash can be
triggered.
https://github.com/lxml/lxml/blob/lxml-4.9.1/CHANGES.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The autotools build system was finally removed in favor of meson,
so migrate the package to the meson infra.
Notable changes:
- c11 is required.
- glib is no longer optional.
- there is no option to choose if libcap or neon must be used or not.
- support for libatomic_ops is broken and must be extensively patched.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is pep517 pyo3 build backend that's an alternative to
python-setuptools-rust.
Note that maturin itself uses python-setuptools-rust for
bootstrapping.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It might be necessary for some packages to define environment variables when calling waf build and waf install.
This is done the same way as the others package types, by defining $(PKG)_MAKE_ENV in .mk.
Signed-off-by: David GOUARIN <david.gouarin@thalesgroup.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Removed dependency to host-perl, not needed anymore after
3f7d05093b
Removed autoreconf, the tarball provided by upstream contains a
configure script.
This configure script however adds /usr/local/include to some tests
which fail for us, instead of patching configure.ac and going through
the autoreconf nightmare again we patch the configure script directly.
Added configure option --without-doc
Added more autoreconf variables to fix cross-compile issues.
Changed "--with-drivers=all" to "--with-drivers=auto" because some new
drivers need packages not provided by buildroot, for example:
configure: error: Powerman client libraries not found, required for
Powerman PDU client driver
Added optional dependency to freeipmi.
Added optional dependency to libusb, for details see
https://github.com/networkupstools/nut/issues/300
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This defconfig uses mesa3d's i965 DRI driver, but mesa3d no longer has
any DRI driver now, so this defconfig no longer builds.
Switching to the Gallium driver would require access to an actual board
to test, and that was not available when applying the mesa3d bump.
So, better drop this defconfig, and let an interested party reinstate
it, using the Gallium driver.
Note that we do still have the defconfig for the basic, non-graphical
Minnowbaord Max.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We used to have a BR2_TOOLCHAIN_HAS_THREADS dependency at the
top-level BR2_PACKAGE_GLSLSANDBOX_PLAYER option to make sure that at
least one of them windowing system was selectable.
However, thanks to the recent introduction of the support for the null
windowing system, we now have a windowing system that doesn't require
any special feature, so we can drop this dependency from the top-level
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This nullws doesn't need any extra dependency other than the EGL/GLES
ones, which will help simplify the glslsandbox-player package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mender-connect is a daemon responsible for handling bidirectional (websocket)
communication with the Mender server. The daemon is responsible for
implementing a range of troubleshooting features to the device as well as
several enhancement to the mender-client.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This script is installed in the official meta-mender yocto recipe. Install it
here as well.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to the latest version of the gcnano-binaries blobs, which are
compatible with the soon-to-be-released 5.15 kernel from the
STMicroelectronics BSP.
As we are installing all the libraries and the pkgconfig files we do not
need to list them anymore. Therefore this patch removes
GCNANO_BINARIES_LIBRARIES and GCNANO_BINARIES_PKG_CONFIGS variables.
It also updates the installation command to follow the path and naming
of the new version and the pkgconfig files to fill the prefix variable with
the right value.
The new version of gcnano has gbm.h header installed in a gbm folder,
this break the build of other packages. The patch fixes it with a simple
link.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch updates the condition to handle custom tarballs as specified by
the configuration. This change is made to have cleaner condition and for
consistency.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch updates the condition to handle custom tarballs as specified by
the configuration. This change is made to have cleaner condition and for
consistency.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch updates the condition to handle custom tarballs as specified by
the configuration. This change is made to have cleaner condition and for
consistency.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch updates the condition to handle custom tarballs as specified by
the configuration. This change is made to have cleaner condition and for
consistency.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Leverage IGNORE_CC_MISMATCH for kernel module builds to avoid an issue
where NVIDIA's `cc_version_check` in kernel/conftest.sh may fail due
to matching on the pkgversion substring of the GCC version string in
the kernel's include/generated/compile.h.
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without libexecinfo raised since commit
66d7d3bec3:
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
EXECINFO_LIBRARY
linked by target "vcos" in directory /home/buildroot/autobuild/run/instance-1/output-1/build/rpi-userland-14b90ff9d9f031391a299e6e006965d02bfd1bb1/interface/vcos/pthreads
Fixes:
- http://autobuild.buildroot.org/results/0b4b20e4eed1ed5120f22d29fc24038f268e6cc6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are two extra ending parentheses to be removed.
They are present from the beggining of TF-A package. I suppose extra
ending parenthese does not bring any issue, but it seems relevant to
remove them.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Link to Rust 1.62.0 annoucement: https://blog.rust-lang.org/2022/06/30/Rust-1.62.0.html
Newest version of the source archives have been retrieved with their hash values,
and the signature of the .asc files have been verified as follows:
$ curl -fsSL https://static.rust-lang.org/rust-key.gpg.ascii | gpg --import
$ gpg --verify <filename.asc> <filename>
There is no typographical error in the packages according to the check-pakage utility:
$ ./utils/check-package package/rust-bin/*
$ ./utils/check-package package/rust/*
The testsuite tool were successfully run for rust and rust-bin packages to test
the Rust toolchain under 1.62.0:
$ ./support/testing/run-tests -k -d dl/ -o testsuite tests.package.test_rust.TestRustBin
$ ./support/testing/run-tests -k -d dl/ -o testsuite tests.package.test_rust.TestRust
In order to verify the compatibility of packages depending on Rust 1.62.0,
tests using `./utils/test-pkg` were run.
You may want to execute the test-pkg command after creating a `.config` file
enabling the corresponding BR2_PACKAGE, for example:
Create a file `buildroot/ripgrep.config` containing "BR2_PACKAGE_RIPGREP=y"
Then execute:
$ ./utils/test-pkg -d test-pkg -c ripgrep.config -p ripgrep
Results:
librsvg OK
ripgrep OK
suricata OK
bat OK
Signed-off-by: Nicolas Tran <nicolas.tran@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following xephyr build failure with kdrive raised since commit
eedbd6f97d:
checking for XEPHYR... no
configure: error: Package requirements (xau xdmcp xcb xcb-shape xcb-render xcb-renderutil xcb-aux xcb-image xcb-icccm xcb-shm >= 1.9.3 xcb-keysyms xcb-randr xcb-xkb xcb-xv) were not met:
Package 'xcb-renderutil', required by 'virtual:world', not found
Package 'xcb-aux', required by 'virtual:world', not found
Package 'xcb-image', required by 'virtual:world', not found
Package 'xcb-icccm', required by 'virtual:world', not found
Package 'xcb-keysyms', required by 'virtual:world', not found
Fixes:
- http://autobuild.buildroot.org/results/baba218c879b67bfbadc9c25d34313abc76397bc
- http://autobuild.buildroot.org/results/9471b77db9aefa2fd0e5be61ea84709183511623
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add new python-pyrsistent runtime dependency.
Drop unused host-python-vcversioner build dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumped the default version of the "arm-trusted-firmware" (a.k.a. TF-A)
from 2.5 to 2.7: updated the config and the tarball checksum.
Work-around CVE-2022-23960.
Updated the "qemu_aarch64_sbsa_defconfig" accordingly: it was using an
"arm-trusted-firmware" v2.4, it nows selects version 2.7.
Updated the license checksum because the license file changed
slightly: it mentions an additional file ("irq.h") released under a
dual GPL or MIT license.
Tested with the "qemu_aarch64_sbsa_defconfig" and QEMU: it boots
without new warning or error message.
Release notes:
<https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html>
Signed-off-by: Olivier L'Heureux <olivier.lheureux@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fiber (https://wiki.php.net/rfc/fibers) has been added in version 8.1.0
with
c276c16b66
fiber uses asm on supported architectures or needs ucontext since
8fd747a2a0
As result, the following build failure is raised without ucontext_t on
architectures not supported by asm since bump to version 8.1.7 in commit
0ddfece7f7:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/10.2.0/../../../../arc-buildroot-linux-uclibc/bin/ld: Zend/zend_fibers.o: in function `zend_fiber_init_context':
zend_fibers.c:(.text+0x68a): undefined reference to `getcontext'
As fiber can't be disabled (only fiber-asm), add
BR2_PACKAGE_PHP_ARCH_SUPPORTS to reflect this new dependency
Fixes:
- http://autobuild.buildroot.org/results/f4077bae8f879828e343475318cd2ddb99e09ba4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Though the code compiles with a big endian toolchain, the kvm-unit-tests
do not work at all in big endian mode on ARM. Until someone steps up to
fix this, disable the package completely on big endian ARM targets.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add new python-typeguard and python-typing-inspect runtime
dependencies.
Add a patch to remove invalid setup_requires.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 0.1.4 introduced a Meson build system, and upstream seems to
have the intention to abandon the previous autotools based one. Switch
to Meson for future proofing.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit f1bcb2a45c introduced a number of
flake8 errors. Fix these by:
- adding noqa to the multi-line string containing tabs;
- replacing other tabs with spaces;
- removing space after opening parenthesis;
- splitting the long lines.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This also removes an old patch to fix atomic_ops for ARM pre-ARMv6.
atomic_ops support has been replaced with C11 atomics, so the patch
did not apply anymore, and should be unnecessary.
This does mean compilation will fail with systems that don't support
C11 atomics, i.e. GCC versions older than 4.9
Signed-off-by: Frederik Van Bogaert <frederik.vanbogaert@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since v1.3.9 the package requires numa.h from numctl, so add this as a
dependency.
librtas now builds fine with musl/uclibc too, so remove the glibc
restriction for enabling that support.
Drop 0001-add-includes-defines-for-musl-libc-support.patch which is
upstream as of 1.3.10.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four test cases for Grub:
- Grub i386 legacy BIOS
- Grub i386 UEFI
- Grub x86-64 UEFI
- Grub AArch64 UEFI
There is some overlap with the ISO9660 filesystem test cases, some of
which use Grub, but we found it relevant to have separate test cases
for Grub, which were useful to test Grub in non-ISO9660 situations.
The Grub ARM UEFI case is not tested, as it requires Grub to be
chain-loaded by U-Boot. Implementing this test case is left as an
exercise for the reader.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- use EDK2 to build the OVMF blurbs from source, instead of the
binary blobs
- add host-dosfstools
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the Qemu-compatible UEFI firmware, the kraxel.org pointed to by
the readme.txt file is outdated. Instead, instruct users to use EDK2.
either by building it from source, or by grabbing pre-built ones, or
from their distributions.
While at it, drop the pci=nocrs information, as it is no longer
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following sh4aeb build failure:
In file included from nlist.c:44:
nlist.c: In function '__elf_is_okay__':
local-elf.h:223:25: error: 'ELFDATA2LMSB' undeclared (first use in this function); did you mean 'ELFDATA2LSB'?
223 | #define ELF_TARG_DATA ELFDATA2LMSB
| ^~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/2980fb79c208454195d77383f1ece9afbd7f981b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Pass LDFLAGS (which will contain -static) to fix the following static
build failure with uclibc:
/nvmedata/autobuild/instance-15/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /nvmedata/autobuild/instance-15/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/libgcc.a(unwind-dw2-fde-dip.o): in function `_Unwind_Find_FDE':
/nvmedata/autobuild/instance-15/output-1/build/host-gcc-final-10.3.0/build/sparc-buildroot-linux-uclibc/libgcc/../../../libgcc/unwind-dw2-fde-dip.c:469: undefined reference to `dl_iterate_phdr'
Fixes:
- http://autobuild.buildroot.org/results/168202f65d168acc55b4d946c2e2416bf890c32c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
License text for the AES implementation was changed from something
resembling BSD-3-Clause to something resembling BSD-2-Clause.
Signed-off-by: André Zwing <nerv@dawncrow.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The NOTICE file contains a long list of licenses. A few of them are MIT,
BSD-2-Clause, BSD-3-Clause, or BSD-4-Clause. And then there are many
that are somewhat similar but not exactly.
Mention all the "known" licenses in LIBKRB5_LICENSE, and add "others" to
indicate that there is more.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Multiple library checks are obsolete, either due to removal or due to built-in solutions.
License file changed due to update of copyright year.
Signed-off-by: André Zwing <nerv@dawncrow.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Includes build fixes for musl, so remove the glibc restriction, as it
now builds fine for both musl and uclibc.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we forcefully require that a default target be specified.
However, systemd does install a default target, but it's not
possible to just use that target.
Allow the user to blank-out the config setting to not override
whatever systemd installed and keep that.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- introduce the usual qstripped inter;ediate variable
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
shadowsocks-libev builds a number of static libraries, which end up
being used in a shared library. Unfortunately, the code of those
static libraries is built without fPIC due to a bogus usage of
libtool.
This commit adds a patch that fixes how libtool is used, to make sure
its produce correct convenience libraries, than can in-turn be linked
into shared libraries.
Fixes:
http://autobuild.buildroot.net/results/75ca164903b8d47fa67343a4c2df11ce3f91d2bd/
and many similar other build failures
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The former _SITE is not longer accessible without authentication.
The homepage is also unavailable, so use the one from the FSF directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: also change the homepage]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This migrates pkg-stats.html from html tables to CSS grid, allowing
the use of newer, simpler javascript that is short enough to be
inlined, instead of relying on externally hosted javascript.
Javascript sorting function was rewritten from scratch in ~55 lines,
short enough to be inlined directly in the html.
Tables were redone in CSS grid, but with care taken to mimic existing
"look and feel" of prevous implementation, albeit with slightly
better responsive behavior and default styling characteristics.
Column labels are now "sticky" and stay stuck to the top of the
viewport as you scroll down the page.
Also, css was rewritten in fewer lines and table elements were changed
to divs (for grid support).
Other small misc fixes include quoted hrefs and document language
declarations to make the w3c html validator happy.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some platforms such as TI's k3 outputs a TARGET_BOARD directory
in their ATF build output paths after PLATFORM.
$(@D)/build/<PLATFORM>/ does not contain the debug or release
directories for these platforms.
They are under $(@D)/build/<PLATFORM>/<TARGET_BOARD>/
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gcc 12.1 is around, gcc 11.3 is the default version, so drop
9.5 in order to reduce the gcc choice.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even if gcc 10.x is still maintained for some time, switch to gcc 11.x
since it has been released since 2021-04-27 and gcc 12.x is available
since "2022-05-10".
We have been having toolchains in the autobuilders with gcc 11.x since
mid-June 2021, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libsanitizer has been enabled for mips64{el} in gcc 12 [1] but it
fail to build when n32 ABI is used:
In file included from output/mips64el-buildroot-linux-gnu/sysroot/usr/include/bits/stat.h:25,
from output/mips64el-buildroot-linux-gnu/sysroot/usr/include/fcntl.h:78,
from ../../../../libsanitizer/sanitizer_common/sanitizer_linux.cpp:55:
output/mips64el-buildroot-linux-gnu/sysroot/usr/include/bits/struct_stat.h:190:8: error: redefinition of ‘struct stat64’
190 | struct stat64
| ^~~~~~
In file included from ../../../../libsanitizer/sanitizer_common/sanitizer_linux.cpp:49:
output/mips64el-buildroot-linux-gnu/sysroot/usr/include/asm/stat.h:52:8: note: previous definition of ‘struct stat64’
52 | struct stat64 {
| ^~~~~~
Disable libsanitizer for mips64 with n32 ABI.
Note: Only glibc toolchains are affected since libsanitizer is
disabled for musl and uClibc-ng toolchains [2].
Fixes:
https://gitlab.com/kubu93/toolchains-builder/-/jobs/2510178651
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=344e6f9f2abcff9b2bb4b26b693be4a599272f43
[2] https://git.buildroot.net/buildroot/commit/?id=5f4d658d888b539de9a6247ae5b1a0999de5d4ec
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 12, the default RISC-V ISA spec version was bump to 20191213 [1].
This bump introduces a major compatibility issue: support for the csr read/write
(csrr*/csrw*) instructions and fence.i instruction has been separated
from the "I" extension, becoming two standalone extensions: Zicsr and
Zifencei. gcc now has specific -march suffixes to enable those
extensions (_zicsr and _zifencei). If they are not used and code that
uses these instructions is built, one would get errors such as
unrecognized opcode "csrr" (or "fence.i").
For example, without Zifencei we can't build the opensbi
bootloader[2]:
opensbi-1.0/lib/sbi/sbi_tlb.c: Assembler messages:
opensbi-1.0/lib/sbi/sbi_tlb.c:190: Error: unrecognized opcode `fence.i', extension `zifencei' required
As a workaround, the opensbi build system has been patched [3] to use
-march=rv64imafdc_zicsr_zifencei when needed. This workaround doesn't
work in Buildroot due to the local patch
0001-Makefile-Don-t-specify-mabi-or-march.patch which removes -march
from CFLAGS.
In the context of Buildroot, we have decided for now to assume that
all RISC-V cores that are Linux capable will implement the Zicsr and
Zifencei extensions: it is in fact the case today ase these extensions
were part of the I extension, that all cores support. OpenSBI and
Linux are making the same assumption (see [5]).
Therefore, when gcc >= 12, the -march value gets appended with
_zicsr_zifencei.
[1] https://gcc.gnu.org/gcc-12/changes.html
[2] https://github.com/riscv-software-src/opensbi/blob/v0.9/lib/sbi/sbi_tlb.c#L173
[3] 5d53b55aa7
[4] https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/aE1ZeHHCYf4
[5] http://lists.busybox.net/pipermail/buildroot/2022-July/646698.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Mark Corbin <mark@dibsco.co.uk>
[Thomas: add comment in .mk file, rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Previously, we used support/scripts/pycompile.py to generate the pyc
files for the python libraries.
While the script worked, it did not follow the PEP 3147 layout
requirements for py+pyc deployments.
Now, use the package's own compileall.py script. This will follow
PEP 3147 guidelines. It also supports "legacy" pyc only deployments as
described here:
https://peps.python.org/pep-3147/#case-4-legacy-pyc-files-and-source-less-imports
With this change, we no longer need to hack support for side-by-side pyc
files because files will be deployed as appropriate.
This also has the added benefit of not requiring python3 on the host to
build host-python3.
Fixes: #14911
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- build-tested in a python-less environment
- build+run-tested with the runtime-test infra
]
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Our current python3 builds only tests the pyc-only case, so add two new
tests, one for py-only and one for py+pyc. For orthogonality, rename the
current test.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we only have python3, we will never have to test a
python2-based build, so we can drop python2 compatibility
cruft.
In python3, print already is a function, we don't need to
import it from the future.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The --enable option was added to CONF_ENV instead of CONF_OPTS. For this
defconfig
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_PACKAGE_ZFS=y
BR2_PACKAGE_LINUX_PAM=y
this yields
/bin/sh: line 1: --enable-pam=yes: command not found
While we're at it, also remove the =yes which we usually don't add.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2022-33070: Protobuf-c v1.4.0 was discovered to contain an
invalid arithmetic shift via the function parse_tag_and_wiretype in
protobuf-c/protobuf-c.c. This vulnerability allows attackers to cause
a Denial of Service (DoS) via unspecified vectors.
- Use official tarball (and so drop autoreconf)
- Update hash of COPYING (year updated with
471aaa5f6d)
https://github.com/protobuf-c/protobuf-c/releases/tag/v1.4.1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix CVE-2022-34265: An issue was discovered in Django 3.2 before 3.2.14
and 4.0 before 4.0.6. The Trunc() and Extract() database functions are
subject to SQL injection if untrusted data is used as a kind/lookup_name
value. Applications that constrain the lookup name and kind choice to a
known safe list are unaffected.
https://www.djangoproject.com/weblog/2022/jul/04/security-releases
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some TPM 2.0 chips offer extra capabilities. This patch adds additional
configuration options to the wolftpm package, so such capabilities can
be available to the user. For example, the STMicroelectronics ST33 and
Nuvoton NPCT750 both offer secure GPIO. Due to chip differences, wolfTPM
requires explicit configuration options to enable the extra capabilities.
Signed-off-by: Dimitar Tomov <dimi@tpm.dev>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a buildroot configuration file to build a minimal Linux environment
for the Canaan KD233 board.
The configuration file is canaan_kd233_defconfig. It builds a bootable
kernel image with an embedded initramfs root file system. The image
built can be flashed to the board as is and does not require a boot
loader. This configuration uses the tiny busybox configuration defined
in board/canaan/k210-soc/busybox-tiny.config.
U-Boot currently does not support this board, making it impossible to
boot the kernel after loading it from the SD card. However, the SD card
is usable from Linux once booted using the canaan_kd233_defconfig
configuration.
The configuration also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Canaan KD233
board with this configuration.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX Go board. The configurations are:
* sipeed_maix_go_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_go_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIX-Go
board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX-Dock board. The configurations are:
* sipeed_maix_dock_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_dock_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed
MAIX-Dock board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIXDUINO board. The configurations are:
* sipeed_maixduino_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maixduino_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIXDUINO
board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX Bit board. The configurations are:
* sipeed_maix_bit_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_bit_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the python-kflash and pyserial-miniterm
host tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIX-Bit
board with these configurations.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Linux environment for all boards using the Canaan Kendryte K210 SoC
can be built with the same process, using configurations that differ
only by the device tree used for the build. This patch add the
shared configurations, rootfs overlay and scripts used for all
K210-based boards.
Since the K210 SoC only has 8 MB of SRAM, a special busybox
configuration and rootfs overlay are added to save memory at runtime:
* For configurations using direct kernel boot (no boot loader), the
default busybox configuration busybox-minimal.config is modified
using the fragment file board/canaan/k210-soc/busybox-tiny.config.
This reduces the size of the busybox executable to save memory when
executing shell commands.
* Busybox init system is not used and a special init scripts is provided
using the rootfs_overlay root file system overlay. This init script
simply mounts devtmpfs, /proc and /sys, and exec an interactive shell
after printing a logo. This avoids (1) boot failures due to large
memory allocations by the regular busybox init system (these
allocations fail on the K210 for lack of enough memory) and avoids
(2) keeping the init process sleeping in the background (wasted
memory).
The board/canaan/k210-soc/busybox-tiny.config and the rootfs overlay
files in board/canaan/k210-soc/rootfs_overlay are used for all Canaan
K210 SoC based boards.
For board configurations booting using the U-Boot boot loader, a common
set of linux kernel configuration parameters is provided by the file
board/canaan/k210-soc/linux-sdcard.config. In addition, the post build
script board/canaan/k210-soc/post-build.sh file and U-Boot image
generation configuration file board/canaan/k210-soc/genimage.cfg are
provided. The post-build script creates a generic "k210.dtb" symlink to
the compiled device tree file for the target board. This symlink is used
by the genimage.cfg configuration, making this file common for all
boards.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There is no need to have configuration files direbtly set the
BR2_PACKAGE_HOST_ELF2FLT option. The need for the elf2flt utility is
automatically determined by gcc build in package/gcc/gcc.mk according to
the BR2_BINFMT_FLAT option.
Accordingly, we can remove the file package/elf2flt/Config.in.host to
get rid of the BR2_PACKAGE_HOST_ELF2FLT option. BR2_STRIP_strip
dependency on this option is replaced with a dependency on
BR2_BINFMT_ELF.
To stay consistent with the fact that elf2flt supports only the arm, sh,
sparc, xtensa and riscv-64 architectures, a dependency on these
architectures is added to the BR2_BINFMT_FLAT option in arch/Config.in.
Board configuration files setting the BR2_PACKAGE_HOST_ELF2FLT option
are also updated.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a runtime test in order to detect undesired changes in behavior of
the get-developers script.
The test uses a .patch file generated against the buildroot tree as a
fixture to check how get-developers operates when called to check it.
The test also overrides the DEVELOPERS file in order to be fully
reproducible and a -d option is added to get-developers in order to
allow this. Since get-developers only looks to already committed
files to compare against patch files, the fixture uses a package that
is very unlikely to be removed from buildroot tree: binutils.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: extracted from a larger patch from Ricardo, submitted at
https://patchwork.ozlabs.org/project/buildroot/patch/20220528014832.289907-1-ricardo.martincoski@gmail.com/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we have a working mechanism to validate the DEVELOPERS file
with the get-developers -v option, let's use it.
This brings back proper validation of the DEVELOPERS file, as
get-developers without argument no longer did any validation following
commit 45aabcddc5 utils/get-developers: really make it callable from
elsewhere than the toplevel directory".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit "45aabcddc5 utils/get-developers: really make it callable from
elsewhere than the toplevel directory" had a unforeseen side-effect:
the fact that check-developers with no arguments used to validate the
syntax of the DEVELOPERS no longer works. Indeed, the
parse_developers() call was moved *after* the check that verifies if
at least one action is passed. Due to this, the check-DEVELOPERS
verification in Gitlab CI, which invokes get-developers without
argument to validate the DEVELOPERS file... no longer does anything
useful.
In order to fix this, we introduce an explicit action in
get-developers to request the validation of the DEVELOPERS file. The
implementation is trivial, as the validation is already done by
calling parse_developers(), but at least now we have an action that
does "nothing", except execute until the validation is done.
This is also much more explicit than "invoke get-developers without
arguments to just do validation".
The initial investigation of the issue was done by Ricardo Martincoski
<ricardo.martincoski@gmail.com> and reported at
https://patchwork.ozlabs.org/project/buildroot/patch/20220528014832.289907-1-ricardo.martincoski@gmail.com/,
but we have chosen to introduce a separate -v option rather than
making the validation part of the existing -c action, which serves a
different purpose.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_TOOLCHAIN_HAS_LIBQUADMATH is set, --enable-libquadmath-support
option is missing. So the float128 support is not fully enabled in gcc.
This lead to a build issue with gcc 12 on PowerPC power8 due to missing
M_2_SQRTPIq definition (provided by libquadmath.h).
../../../libgfortran/intrinsics/erfc_scaled.c: In function ‘erfc_scaled_r17’:
../../../libgfortran/intrinsics/erfc_scaled.c:143:22: error: ‘M_2_SQRTPIq’ undeclared (first use in this function); did you mean ‘M_2_SQRTPIf’?
143 | # define _M_2_SQRTPI M_2_SQRTPIq
| ^~~~~~~~~~~
This is fixed by adding --enable-libquadmath-support (like crosstool-ng
handling [1]).
Fixes:
https://gitlab.com/kubu93/toolchains-builder/-/jobs/2510178766
[1] https://github.com/crosstool-ng/crosstool-ng/blob/crosstool-ng-1.25.0/scripts/build/cc/gcc.sh#L370
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The update is very straightforward, as no changes in grub2.mk are
needed beyond the version bump.
Spacing in the hash file is adjusted to the new Buildroot standard.
All patches are dropped as they have all been upstreamed between 2.04
and 2.06. Here is the full list of patches and their corresponding
upstream commit:
* 0001-build-Fix-GRUB-i386-pc-build-with-Ubuntu-gcc.patch
6643507ce30f775008e093580f0c9499dfb2c485 build: Fix GRUB i386-pc build with Ubuntu gcc
* 0002-yylex-Make-lexer-fatal-errors-actually-be-fatal.patch
a4d3fbdff1e3ca8f87642af2ac8752c30c617a3e yylex: Make lexer fatal errors actually be fatal
* 0003-safemath-Add-some-arithmetic-primitives-that-check-f.patch
68708c4503018d61dbcce7ac11cbb511d6425f4d safemath: Add some arithmetic primitives that check for overflow
* 0004-calloc-Make-sure-we-always-have-an-overflow-checking.patch
64e26162ebfe68317c143ca5ec996c892019f8f8 calloc: Make sure we always have an overflow-checking calloc() available
* 0005-calloc-Use-calloc-at-most-places.patch
f725fa7cb2ece547c5af01eeeecfe8d95802ed41 calloc: Use calloc() at most places
* 0006-malloc-Use-overflow-checking-primitives-where-we-do-.patch
3f05d693d1274965ffbe4ba99080dc2c570944c6 malloc: Use overflow checking primitives where we do complex allocations
* 0007-iso9660-Don-t-leak-memory-on-realloc-failures.patch
2a1edcf2ede865b60604815d3bc5c01029379ca4 iso9660: Don't leak memory on realloc() failures
* 0008-font-Do-not-load-more-than-one-NAME-section.patch
89f3da1a3d14023eda182e075919dd584031ecad font: Do not load more than one NAME section
* 0009-gfxmenu-Fix-double-free-in-load_image.patch
26a8c19307f998f67dbfb784068e394c8e9c8478 gfxmenu: Fix double free in load_image()
* 0010-xnu-Fix-double-free-in-grub_xnu_devprop_add_property.patch
6d7a59a2a184f7af8a90a4c90d7c7b6482acc656 xnu: Fix double free in grub_xnu_devprop_add_property()
* 0011-lzma-Make-sure-we-don-t-dereference-past-array.patch
16c0dbf4bc6a953c41bc7a031b36dfa8e906afea lzma: Make sure we don't dereference past array
* 0012-term-Fix-overflow-on-user-inputs.patch
61b7ca08d173adf62facdd6a266cbd2471165e67 term: Fix overflow on user inputs
* 0013-udf-Fix-memory-leak.patch
d17770857e1c901a8167f63d6558856cfaf313ff udf: Fix memory leak
* 0014-multiboot2-Fix-memory-leak-if-grub_create_loader_cmd.patch
f8ad7a3dd8213f691b0f32d0e9eb656a70cefc13 multiboot2: Fix memory leak if grub_create_loader_cmdline() fails
* 0015-tftp-Do-not-use-priority-queue.patch
781b3e5efc35c17cbce95393aafd63a5b429f9e6 tftp: Do not use priority queue
* 0016-relocator-Protect-grub_relocator_alloc_chunk_addr-in.patch
caea56d1f8fa1ae298936f8d75b220e7f12b73d3 relocator: Protect grub_relocator_alloc_chunk_addr() input args against integer underflow/overflow
* 0017-relocator-Protect-grub_relocator_alloc_chunk_align-m.patch
61ff5602fe8f2a3446346795daebe4ec3b82c20f relocator: Protect grub_relocator_alloc_chunk_align() max_addr against integer underflow
* 0018-script-Remove-unused-fields-from-grub_script_functio.patch
1a8d9c9b4ab6df7669b5aa36a56477f297825b96 script: Remove unused fields from grub_script_function struct
* 0019-script-Avoid-a-use-after-free-when-redefining-a-func.patch
426f57383d647406ae9c628c472059c27cd6e040 script: Avoid a use-after-free when redefining a function during execution
* 0020-relocator-Fix-grub_relocator_alloc_chunk_align-top-m.patch
07e5b79e22fd58c5382323dd71d64aaa42f928ec relocator: Fix grub_relocator_alloc_chunk_align() top memory allocation
* 0021-hfsplus-Fix-two-more-overflows.patch
f5703eb0625b786f141d09be19b7af40b572a446 hfsplus: Fix two more overflows
* 0022-lvm-Fix-two-more-potential-data-dependent-alloc-over.patch
879c4a8342eacc0ba4b9dd11dc69d3ec3dbe73af lvm: Fix two more potential data-dependent alloc overflows
* 0023-emu-Make-grub_free-NULL-safe.patch
b73cee7f1f8287ed3af32fffe8aaf33cdff52f6b emu: Make grub_free(NULL) safe
* 0024-efi-Fix-some-malformed-device-path-arithmetic-errors.patch
d2cf823d0e31818d1b7a223daff6d5e006596543 efi: Fix some malformed device path arithmetic errors
* 0025-efi-chainloader-Propagate-errors-from-copy_file_path.patch
098058752e1cee7b457ff45562a81e756ab0b532 efi/chainloader: Propagate errors from copy_file_path()
* 0026-efi-Fix-use-after-free-in-halt-reboot-path.patch
f7bd9986f607a924bf23b813900a8595f2815f0c efi: Fix use-after-free in halt/reboot path
* 0027-loader-linux-Avoid-overflow-on-initrd-size-calculati.patch
0dcbf3652b6738971407dacc03fb685dfafc5ec5 loader/linux: Avoid overflow on initrd size calculation
* 0028-linux-Fix-integer-overflows-in-initrd-size-handling.patch
e7b8856f8be3292afdb38d2e8c70ad8d62a61e10 linux: Fix integer overflows in initrd size handling
* 0029-efi-Make-shim_lock-GUID-and-protocol-type-public.patch
f76a27996c34900f2c369a8a0d6ac72ae2faa988 efi: Make shim_lock GUID and protocol type public
* 0030-efi-Return-grub_efi_status_t-from-grub_efi_get_varia.patch
04ae030d0eea8668d4417702d88bf2cf04713d80 efi: Return grub_efi_status_t from grub_efi_get_variable()
* 0031-efi-Add-a-function-to-read-EFI-variables-with-attrib.patch
ac5c9367548750e75ed1e7fc4354a3d20186d733 efi: Add a function to read EFI variables with attributes
* 0032-efi-Add-secure-boot-detection.patch
d7e54b2e5feee95d2f83058ed30d883c450d1473 efi: Add secure boot detection
* 0033-verifiers-Move-verifiers-API-to-kernel-image.patch
9e95f45ceeef36fcf93cbfffcf004276883dbc99 verifiers: Move verifiers API to kernel image
* 0034-efi-Move-the-shim_lock-verifier-to-the-GRUB-core.patch
5e280caa6530ed160dcf2920c94f1605fb1f1f7c efi: Move the shim_lock verifier to the GRUB core
* 0035-kern-Add-lockdown-support.patch
578c95298bcc46e0296f4c786db64c2ff26ce2cc kern: Add lockdown support
* 0036-kern-lockdown-Set-a-variable-if-the-GRUB-is-locked-d.patch
d90367471779c240e002e62edfb6b31fc85b4908 kern/lockdown: Set a variable if the GRUB is locked down
* 0037-efi-Lockdown-the-GRUB-when-the-UEFI-Secure-Boot-is-e.patch
98b00a403cbf2ba6833d1ac0499871b27a08eb77 efi: Lockdown the GRUB when the UEFI Secure Boot is enabled
* 0038-efi-Use-grub_is_lockdown-instead-of-hardcoding-a-dis.patch
8f73052885892bc0dbc01e297f79d7cf4925e491 efi: Use grub_is_lockdown() instead of hardcoding a disabled modules list
* 0039-acpi-Don-t-register-the-acpi-command-when-locked-dow.patch
3e8e4c0549240fa209acffceb473e1e509b50c95 acpi: Don't register the acpi command when locked down
* 0040-mmap-Don-t-register-cutmem-and-badram-commands-when-.patch
d298b41f90cbf1f2e5a10e29daa1fc92ddee52c9 mmap: Don't register cutmem and badram commands when lockdown is enforced
* 0041-commands-Restrict-commands-that-can-load-BIOS-or-DT-.patch
468a5699b249fe6816b4e7e86c5dc9d325c9b09e commands: Restrict commands that can load BIOS or DT blobs when locked down
* 0042-commands-setpci-Restrict-setpci-command-when-locked-.patch
58b77d4069823b44c5fa916fa8ddfc9c4cd51e02 commands/setpci: Restrict setpci command when locked down
* 0043-commands-hdparm-Restrict-hdparm-command-when-locked-.patch
5c97492a29c6063567b65ed1a069f5e6f4e211f0 commands/hdparm: Restrict hdparm command when locked down
* 0044-gdb-Restrict-GDB-access-when-locked-down.patch
508270838998f151a82e9c13e7cb8a470a2dc23d gdb: Restrict GDB access when locked down
* 0045-loader-xnu-Don-t-allow-loading-extension-and-package.patch
9c5565135f12400a925ee901b25984e7af4442f5 loader/xnu: Don't allow loading extension and packages when locked down
* 0046-docs-Document-the-cutmem-command.patch
f05e79a0143beb2d9a482a3ebf4fe0ce76778122 docs: Document the cutmem command
* 0047-dl-Only-allow-unloading-modules-that-are-not-depende.patch
7630ec5397fe418276b360f9011934b8c034936c dl: Only allow unloading modules that are not dependencies
* 0048-usb-Avoid-possible-out-of-bound-accesses-caused-by-m.patch
128c16a682034263eb519c89bc0934eeb6fa8cfa usb: Avoid possible out-of-bound accesses caused by malicious devices
* 0049-mmap-Fix-memory-leak-when-iterating-over-mapped-memo.patch
8cb2848f9699642a698af84b12ba187cab722031 mmap: Fix memory leak when iterating over mapped memory
* 0050-net-net-Fix-possible-dereference-to-of-a-NULL-pointe.patch
03f2515ae0c503406f1a99a2178405049c6555db net/net: Fix possible dereference to of a NULL pointer
* 0051-net-tftp-Fix-dangling-memory-pointer.patch
0cb838b281a68b536a09681f9557ea6a7ac5da7a net/tftp: Fix dangling memory pointer
* 0052-kern-parser-Fix-resource-leak-if-argc-0.patch
d06161b035dde4769199ad65aa0a587a5920012b kern/parser: Fix resource leak if argc == 0
* 0053-kern-efi-Fix-memory-leak-on-failure.patch
ed286ceba6015d37a9304f04602451c47bf195d7 kern/efi: Fix memory leak on failure
* 0054-kern-efi-mm-Fix-possible-NULL-pointer-dereference.patch
6aee4bfd6973c714056fb7b56890b8d524e94ee1 kern/efi/mm: Fix possible NULL pointer dereference
* 0055-gnulib-regexec-Resolve-unused-variable.patch
a983d36bd9178d377d2072fd4b11c635fdc404b4 gnulib/regexec: Resolve unused variable
* 0056-gnulib-regcomp-Fix-uninitialized-token-structure.patch
75c3d3cec4f408848f575d6d5e30a95bd6313db0 gnulib/regcomp: Fix uninitialized token structure
* 0057-gnulib-argp-help-Fix-dereference-of-a-possibly-NULL-.patch
3a37bf120a9194c373257c70175cdb5b337bc107 gnulib/argp-help: Fix dereference of a possibly NULL state
* 0058-gnulib-regexec-Fix-possible-null-dereference.patch
0b7f347638153e403ee2dd518af3ce26f4f99647 gnulib/regexec: Fix possible null-dereference
* 0059-gnulib-regcomp-Fix-uninitialized-re_token.patch
03477085f9a33789ba6cca7cd49ab9326a1baa0e gnulib/regcomp: Fix uninitialized re_token
* 0060-io-lzopio-Resolve-unnecessary-self-assignment-errors.patch
59666e520f44177c97b82a44c169b3b315d63b42 io/lzopio: Resolve unnecessary self-assignment errors
* 0061-zstd-Initialize-seq_t-structure-fully.patch
2777cf4466719921dbe4b30af358a75e7d76f217 zstd: Initialize seq_t structure fully
* 0062-kern-partition-Check-for-NULL-before-dereferencing-i.patch
bc9c468a2ce84bc767234eec888b71f1bc744fff kern/partition: Check for NULL before dereferencing input string
* 0063-disk-ldm-Make-sure-comp-data-is-freed-before-exiting.patch
23e39f50ca7a107f6b66396ed4d177a914dee035 disk/ldm: Make sure comp data is freed before exiting from make_vg()
* 0064-disk-ldm-If-failed-then-free-vg-variable-too.patch
e0b83df5da538d2a38f770e60817b3a4b9d5b4d7 disk/ldm: If failed then free vg variable too
* 0065-disk-ldm-Fix-memory-leak-on-uninserted-lv-references.patch
156c281a1625dc73fd350530630c6f2d5673d4f6 disk/ldm: Fix memory leak on uninserted lv references
* 0066-disk-cryptodisk-Fix-potential-integer-overflow.patch
a201ad17caa430aa710654fdf2e6ab4c8166f031 disk/cryptodisk: Fix potential integer overflow
* 0067-hfsplus-Check-that-the-volume-name-length-is-valid.patch
2298f6e0d951251bb9ca97d891d1bc8b74515f8c hfsplus: Check that the volume name length is valid
* 0068-zfs-Fix-possible-negative-shift-operation.patch
a02091834d3e167320d8a262ff04b8e83c5e616d zfs: Fix possible negative shift operation
* 0069-zfs-Fix-resource-leaks-while-constructing-path.patch
89bdab965805e8d54d7f75349024e1a11cbe2eb8 zfs: Fix resource leaks while constructing path
* 0070-zfs-Fix-possible-integer-overflows.patch
302c12ff5714bc455949117c1c9548ccb324d55b zfs: Fix possible integer overflows
* 0071-zfsinfo-Correct-a-check-for-error-allocating-memory.patch
7aab03418ec6a9b991aa44416cb2585aff4e7972 zfsinfo: Correct a check for error allocating memory
* 0072-affs-Fix-memory-leaks.patch
178ac5107389f8e5b32489d743d6824a5ebf342a affs: Fix memory leaks
* 0073-libgcrypt-mpi-Fix-possible-unintended-sign-extension.patch
e8814c811132a70f9b55418f7567378a34ad3883 libgcrypt/mpi: Fix possible unintended sign extension
* 0074-libgcrypt-mpi-Fix-possible-NULL-dereference.patch
ae0f3fabeba7b393113d5dc185b6aff9b728136d libgcrypt/mpi: Fix possible NULL dereference
* 0075-syslinux-Fix-memory-leak-while-parsing.patch
95bc016dba94cab3d398dd74160665915cd08ad6 syslinux: Fix memory leak while parsing
* 0076-normal-completion-Fix-leaking-of-memory-when-process.patch
9213575b7a95b514bce80be5964a28d407d7d56d normal/completion: Fix leaking of memory when processing a completion
* 0077-commands-hashsum-Fix-a-memory-leak.patch
8b6f528e52e18b7a69f90b8dc3671d7b1147d9f3 commands/hashsum: Fix a memory leak
* 0079-video-efi_gop-Remove-unnecessary-return-value-of-gru.patch
fc5951d3b1616055ef81a019a5affc09d13344d0 video/efi_gop: Remove unnecessary return value of grub_video_gop_fill_mode_info()
* 0080-video-fb-fbfill-Fix-potential-integer-overflow.patch
7ce3259f67ac2cd93acb0ec0080c24b3b69e66c6 video/fb/fbfill: Fix potential integer overflow
* 0081-video-fb-video_fb-Fix-multiple-integer-overflows.patch
08e098b1dbf01e96376f594b337491bc4cfa48dd video/fb/video_fb: Fix multiple integer overflows
* 0082-video-fb-video_fb-Fix-possible-integer-overflow.patch
08413f2f4edec0e2d9bf15f836f6ee5ca2e379cb video/fb/video_fb: Fix possible integer overflow
* 0083-video-readers-jpeg-Test-for-an-invalid-next-marker-r.patch
5f5eb7ca8e971227e95745abe541df3e1509360e video/readers/jpeg: Test for an invalid next marker reference from a jpeg file
* 0084-gfxmenu-gui_list-Remove-code-that-coverity-is-flaggi.patch
4a1aa5917595650efbd46b581368c470ebee42ab gfxmenu/gui_list: Remove code that coverity is flagging as dead
* 0085-loader-bsd-Check-for-NULL-arg-up-front.patch
5d5391b0a05abe76e04c1eb68dcc6cbef5326c4a loader/bsd: Check for NULL arg up-front
* 0086-loader-xnu-Fix-memory-leak.patch
bcb59ece3263d118510c4440c4da0950f224bb7f loader/xnu: Fix memory leak
* 0087-loader-xnu-Free-driverkey-data-when-an-error-is-dete.patch
4b4027b6b1c877d7ab467896b04c7bd1aadcfa15 loader/xnu: Free driverkey data when an error is detected in grub_xnu_writetree_toheap()
* 0088-loader-xnu-Check-if-pointer-is-NULL-before-using-it.patch
7c8a2b5d1421a0f2a33d33531f7561f3da93b844 loader/xnu: Check if pointer is NULL before using it
* 0089-util-grub-install-Fix-NULL-pointer-dereferences.patch
8b3a95655b4391122e7b0315d8cc6f876caf8183 util/grub-install: Fix NULL pointer dereferences
* 0090-util-grub-editenv-Fix-incorrect-casting-of-a-signed-.patch
5dc41edc4eba259c6043ae7698c245ec1baaacc6 util/grub-editenv: Fix incorrect casting of a signed value
* 0091-util-glue-efi-Fix-incorrect-use-of-a-possibly-negati.patch
1641d74e16f9d1ca35ba1a87ee4a0bf3afa48e72 util/glue-efi: Fix incorrect use of a possibly negative value
* 0092-script-execute-Fix-NULL-dereference-in-grub_script_e.patch
41ae93b2e6c75453514629bcfe684300e3aec0ce script/execute: Fix NULL dereference in grub_script_execute_cmdline()
* 0093-commands-ls-Require-device_name-is-not-NULL-before-p.patch
6afbe6063c95b827372f9ec310c9fc7461311eb1 commands/ls: Require device_name is not NULL before printing
* 0094-script-execute-Avoid-crash-when-using-outside-a-func.patch
fe0586347ee46f927ae27bb9673532da9f5dead5 script/execute: Avoid crash when using "$#" outside a function scope
* 0095-lib-arg-Block-repeated-short-options-that-require-an.patch
2a330dba93ff11bc00eda76e9419bc52b0c7ead6 lib/arg: Block repeated short options that require an argument
* 0096-script-execute-Don-t-crash-on-a-for-loop-with-no-ite.patch
0a05f88e2bb33ed2a0cfd93f481f471efb7791aa script/execute: Don't crash on a "for" loop with no items
* 0097-commands-menuentry-Fix-quoting-in-setparams_prefix.patch
2f533a89a8dfcacbf2c9dbc77d910f111f24bf33 commands/menuentry: Fix quoting in setparams_prefix()
* 0098-kern-misc-Always-set-end-in-grub_strtoull.patch
f41f0af48ab7f7c135aac17ac862c30bde0bbab7 kern/misc: Always set *end in grub_strtoull()
* 0099-video-readers-jpeg-Catch-files-with-unsupported-quan.patch
693989598fd38c3c0b2a928f4f64865b5681762f video/readers/jpeg: Catch files with unsupported quantization or Huffman tables
* 0100-video-readers-jpeg-Catch-OOB-reads-writes-in-grub_jp.patch
34b85a6e07014383ddcad09f99ff239ad752dd1a video/readers/jpeg: Catch OOB reads/writes in grub_jpeg_decode_du()
* 0101-video-readers-jpeg-Don-t-decode-data-before-start-of.patch
8338a8238f08d9f3ae4c2ddfff0603eff80af9e2 video/readers/jpeg: Don't decode data before start of stream
* 0102-term-gfxterm-Don-t-set-up-a-font-with-glyphs-that-ar.patch
829329bddb2c3e623270cc634cc9ab32e6455fe7 term/gfxterm: Don't set up a font with glyphs that are too big
* 0103-fs-fshelp-Catch-impermissibly-large-block-sizes-in-r.patch
b5bc456f664bc301ab4cd5a17d3d23c6661c259e fs/fshelp: Catch impermissibly large block sizes in read helper
* 0104-fs-hfsplus-Don-t-fetch-a-key-beyond-the-end-of-the-n.patch
58ea11d5b9ca0966bd9c68d8ba5240cf7dc3ba83 fs/hfsplus: Don't fetch a key beyond the end of the node
* 0105-fs-hfsplus-Don-t-use-uninitialized-data-on-corrupt-f.patch
2ca0e5dbcdcb6fc93ccae39a0f39d0dba4a7ff20 fs/hfsplus: Don't use uninitialized data on corrupt filesystems
* 0106-fs-hfs-Disable-under-lockdown.patch
1c15848838d924552611247110723e2a1c17a5a1 fs/hfs: Disable under lockdown
* 0107-fs-sfs-Fix-over-read-of-root-object-name.patch
8d3ae59dee2930d640add3bba983006e1f5dd1b6 fs/sfs: Fix over-read of root object name
* 0108-fs-jfs-Do-not-move-to-leaf-level-if-name-length-is-n.patch
ffd5a46f68710e2781899d0be4d701429a5a817d fs/jfs: Do not move to leaf level if name length is negative
* 0109-fs-jfs-Limit-the-extents-that-getblk-can-consider.patch
bd0cf8148ccf721f6e39ffbd70f8abad0c8897f0 fs/jfs: Limit the extents that getblk() can consider
* 0110-fs-jfs-Catch-infinite-recursion.patch
223120dd83745126cb232a0248c9a8901d7e350d fs/jfs: Catch infinite recursion
* 0111-fs-nilfs2-Reject-too-large-keys.patch
20ab8cb44bc140a1dedda82a3fccdd45e9bc6929 fs/nilfs2: Reject too-large keys
* 0112-fs-nilfs2-Don-t-search-children-if-provided-number-i.patch
37c0eb05cdcc64c28d31c4ebd300f14d5239d05e fs/nilfs2: Don't search children if provided number is too large
* 0113-fs-nilfs2-Properly-bail-on-errors-in-grub_nilfs2_btr.patch
ca5d9ac206043b1fb4cb06259272fb1c5946bb6d fs/nilfs2: Properly bail on errors in grub_nilfs2_btree_node_lookup()
* 0114-io-gzio-Bail-if-gzio-tl-td-is-NULL.patch
3334a5e6c86f10e715cca3bf66ce0fc2f164b61b io/gzio: Bail if gzio->tl/td is NULL
* 0115-io-gzio-Add-init_dynamic_block-clean-up-if-unpacking.patch
18490336d91da2b532277cba56473bfed1376fc4 io/gzio: Add init_dynamic_block() clean up if unpacking codes fails
* 0116-io-gzio-Catch-missing-values-in-huft_build-and-bail.patch
4e76b08f7171a8603d74fcafb27409a91f578647 io/gzio: Catch missing values in huft_build() and bail
* 0117-io-gzio-Zero-gzio-tl-td-in-init_dynamic_block-if-huf.patch
b5a2b59cc5b8f5ee7ba3b951e7693e402d5b3a6f io/gzio: Zero gzio->tl/td in init_dynamic_block() if huft_build() fails
* 0118-disk-lvm-Don-t-go-beyond-the-end-of-the-data-we-read.patch
a8cc95de74ccc3ad090e8062ac335c844f13c9f4 disk/lvm: Don't go beyond the end of the data we read from disk
* 0119-disk-lvm-Don-t-blast-past-the-end-of-the-circular-me.patch
27a79bf38e6d050e497eb96a3fdddce43af25577 disk/lvm: Don't blast past the end of the circular metadata buffer
* 0120-disk-lvm-Bail-on-missing-PV-list.patch
2958695c4cdc785de6ed708709af071a2d20afef disk/lvm: Bail on missing PV list
* 0121-disk-lvm-Do-not-crash-if-an-expected-string-is-not-f.patch
db29073fc7aec71a40dabfc722a96ea9f3280907 disk/lvm: Do not crash if an expected string is not found
* 0122-disk-lvm-Do-not-overread-metadata.patch
1155d7dffd3337942cb7583706b429d567d4db86 disk/lvm: Do not overread metadata
* 0123-disk-lvm-Sanitize-rlocn-offset-to-prevent-wild-read.patch
701293684742d00133b39bf957d3642c81dc83f4 disk/lvm: Sanitize rlocn->offset to prevent wild read
* 0124-disk-lvm-Do-not-allow-a-LV-to-be-it-s-own-segment-s-.patch
e18a00073890021362b4a48097672f1d4b340d3c disk/lvm: Do not allow a LV to be it's own segment's node's LV
* 0125-fs-btrfs-Validate-the-number-of-stripes-parities-in-.patch
b88a82e78cdd0ab8e0339c1c3f9564c4d8c0c969 fs/btrfs: Validate the number of stripes/parities in RAID5/6
* 0126-fs-btrfs-Squash-some-uninitialized-reads.patch
b911884dd707ba1e6f641eb17857df3155013a45 fs/btrfs: Squash some uninitialized reads
* 0127-kern-parser-Fix-a-memory-leak.patch
c6c426e5ab6ea715153b72584de6bd8c82f698ec kern/parser: Fix a memory leak
* 0128-kern-parser-Introduce-process_char-helper.patch
b1c9e9e889e4273fb15712051c887e6078511448 kern/parser: Introduce process_char() helper
* 0129-kern-parser-Introduce-terminate_arg-helper.patch
3d157bbd06506b170fde5ec23980c4bf9f7660e2 kern/parser: Introduce terminate_arg() helper
* 0130-kern-parser-Refactor-grub_parser_split_cmdline-clean.patch
8bc817014ce3d7a498db44eae33c8b90e2430926 kern/parser: Refactor grub_parser_split_cmdline() cleanup
* 0131-kern-buffer-Add-variable-sized-heap-buffer.patch
030fb6c4fa354cdbd6a8d6903dfed5d36eaf3cb2 kern/buffer: Add variable sized heap buffer
* 0132-kern-parser-Fix-a-stack-buffer-overflow.patch
4ea7bae51f97e49c84dc67ea30b466ca8633b9f6 kern/parser: Fix a stack buffer overflow
* 0133-kern-efi-Add-initial-stack-protector-implementation.patch
133d73079c5771bbf3d8311281b6772846357ec1 kern/efi: Add initial stack protector implementation
* 0134-util-mkimage-Remove-unused-code-to-add-BSS-section.patch
d52f78def1b9c4f435fdbf6b24fd899208580c76 util/mkimage: Remove unused code to add BSS section
* 0135-util-mkimage-Use-grub_host_to_target32-instead-of-gr.patch
1710452aca05ccdd21e74390ec08c63fdf0ee10a util/mkimage: Use grub_host_to_target32() instead of grub_cpu_to_le32()
* 0136-util-mkimage-Always-use-grub_host_to_target32-to-ini.patch
ae8936f9c375e1a38129e85a1b5d573fb451f288 util/mkimage: Always use grub_host_to_target32() to initialize PE stack and heap stuff
* 0137-util-mkimage-Unify-more-of-the-PE32-and-PE32-header-.patch
a4e8936f010a8e928e973b80390c8f83ad6b8000 util/mkimage: Unify more of the PE32 and PE32+ header set-up
* 0138-util-mkimage-Reorder-PE-optional-header-fields-set-u.patch
ba44c87e56a8bccde235ebb7d41d5aa54604d241 util/mkimage: Reorder PE optional header fields set-up
* 0139-util-mkimage-Improve-data_size-value-calculation.patch
ff406eff25465932b97a2857ee5a75fd0957e9b9 util/mkimage: Improve data_size value calculation
* 0140-util-mkimage-Refactor-section-setup-to-use-a-helper.patch
f60ba9e5945892e835e53f0619406d96002f7f70 util/mkimage: Refactor section setup to use a helper
* 0141-util-mkimage-Add-an-option-to-import-SBAT-metadata-i.patch
b11547137703bbc642114a816233a5b6fed61b06 util/mkimage: Add an option to import SBAT metadata into a .sbat section
* 0142-grub-install-common-Add-sbat-option.patch
bb51ee2b49fbda0f66c1fa580a33442ff578f110 grub-install-common: Add --sbat option
* 0143-shim_lock-Only-skip-loading-shim_lock-verifier-with-.patch
968de8c23c1cba0f18230f778ebcf6c412ec8ec5 shim_lock: Only skip loading shim_lock verifier with explicit consent
* 0144-kern-misc-Split-parse_printf_args-into-format-parsin.patch
7f11bde3143b21b40d8225ea1d641e0f83b5a01e kern/misc: Split parse_printf_args() into format parsing and va_list handling
* 0145-kern-misc-Add-STRING-type-for-internal-printf-format.patch
1a2a5aff71e8edba436398492279de434abfe7a3 kern/misc: Add STRING type for internal printf() format handling
* 0146-kern-misc-Add-function-to-check-printf-format-agains.patch
83603bea6ce8fdff5ab3fbc4c9e592a8c71a8706 kern/misc: Add function to check printf() format against expected format
* 0147-gfxmenu-gui-Check-printf-format-in-the-gui_progress_.patch
42facd577231cf5ffe4c7128fed15b7e7d99cbca gfxmenu/gui: Check printf() format in the gui_progress_bar and gui_label
* 0148-templates-Disable-the-os-prober-by-default.patch
e346414725a70e5c74ee87ca14e580c66f517666 templates: Disable the os-prober by default
* 0149-kern-mm-Fix-grub_debug_calloc-compilation-error.patch
a9d8de960834f376087856f9d60a214b47c76f61 kern/mm: Fix grub_debug_calloc() compilation error
* 0150-Makefile-Make-libgrub.pp-depend-on-config-util.h.patch
42f4054faf3c7f2cd2cab5b43e63f9d97d81f7a1 Makefile: Make libgrub.pp depend on config-util.h
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Yann E. MORIN <yann.morin@orange.com>
Reviewed-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The genimage.cfg modified by this commit used the partition-type-uuid
c12a7328-f81f-11d2-ba4b-00a0c93ec93b, which identifies the EFI System
Partition, for a partition that isn't the EFI System Partition, but
just a regular FAT partition, for which GUID
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 is more appropriate.
So we switch these to use partition-type-uuid = F, as it makes more
sense.
Please note that this commit introduces a difference in the resulting
output, as those partitions will now have a different GUID.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit changes to use partition-type-uuid = U instead of
c12a7328-f81f-11d2-ba4b-00a0c93ec93b where relevant for the EFI System
Partition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The boot partition is not an EFI System Partition, it is a normal FAT
formatted partition, so using type F instead of U makes more sense.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Whenever possible, we want to use the "shortcuts" provided by genimage
for the partition-type-uuid values:
- U for the EFI System Partition
- F for FAT32 partitions
- L for root filesystem partitions and other Linux filesystems
In follow-up commits, we will convert existing genimage.cfg to this
convention, except for the root filesystem, if the existing
genimage.cfg specifies a partition-type-uuid that doesn't match the
one that "L" would imply. In this case, we will keep things as-is to
not break existing setups. However, for all future genimage.cfg files,
we recommend to use "L" for the root filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gpt = "true" form is deprecated in genimage, use
partition-table-type = "gpt" instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bumps TF-A to version v2.7 and U-Boot to version v2022.04 for
Qemu vexpress/trustzone board config.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Through mstpd version 0.1.0, the bridge-stp script uses the '-c'
option to the pidof command. Busybox does not support this option, so
mstpd does not work.
This has been fixed in the main development branch of mstpd, but it is
unclear when the next release will be. In the meantime, apply the fix
here so that mstpd will be useable until the next version release.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since v2.0 the sysklogd project has provided an interposing library
libsyslog.{a,so} with a syslog() replacement, including the NetBSD
syslogp() API for RFC5424 logging.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Backport various post 20220527 release runtime fixes:
* The concept of max runtime
* tst_test.sh: Cleanup getopts usage
* mountns0[1-3]: wait for umount completed in thread_b
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- set 'CC="$(HOSTCC)"' to avoid cross-compile failure (see [1]):
/bin/sh: line 1: .../build/ntpsec-1_2_0/build/host/ntpd/keyword-gen: cannot execute binary file: Exec format error
Waf: Leaving directory `.../build/ntpsec-1_2_0/build/host'
Build failed
-> task in 'ntp_keyword.h' failed with exit status 126 (run with -v to display more information)
- set '-std=gnu99"' to avoid compile failure with old compilers
- explicitly set PYTHON_CONFIG
- add patch 001-ntptime-fix-jfmt5-ofmt5-jfmt6-ofmt6-related-compile-.patch to
fix ntptime jfmt5/ofmt5 jfmt6/ofmt6 related compile failure
- add patch 0002-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch to
fix host-compile failure in case target libbsd is detected
- add SYSV init file (S49ntp)
- add example ntpd.conf (with legacy option enabled and provide skeleton
for NTS configuration)
- add config option for NTS support
- add ntp user/group and run ntpd as restricted user
- add libcap dependency (compile time optional but needed for droproot
support)
[1] https://gitlab.com/NTPsec/ntpsec/-/issues/694
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: S49ntp -> S49ntpd]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to a tagged release, pulling in about 4 years of development.
Note that v1 encryption policies have been deprecated and removed in
this release. Since the previous version in Buildroot is old enough not
to have support for v2 policies, this is an incompatible update.
There are unlikely to be many v1 users and the format has some known
vulnerabilities so no compatibility option is included.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bumps OP-TEE Client package version to OP-TEE release 3.18.0.
Removes patch that has been merged between OP-TEE tags 3.17.0 and 3.18.0.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When building with the DRM support, it can happen that the libgbm library
is not yet built by the provider of this lib (specified by
BR2_PACKAGE_PROVIDES_LIBGBM).
The docs in cog `docs/platform-drm.md` specify this dep-list:
- **WPEBackend-fdo**:
- **Wayland**:
- **libdrm**:
- **libgbm**:
- **libinput**:
- **libudev**:
libgbm needs to be added.
Adding libegl as well.
Updated package/cog/Config.in to define the dependencies (for DRM)
according to libegl & libgbm.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Patch 0001-Make.defaults-don-t-override-ARCH-when-cross-compili.patch
is refreshed to accommodate with conflicting upstream changes.
Patch 0002-Revert-efilink-fix-build-with-gcc-4.8.patch is dropped as
it is upstream as of commit
8b2da2c2247af28bd681a9c8e3231559964c80a6 ("Revert "efilink: fix build
with gcc 4.8"").
A new patch is needed to fix the build on mips64.
While at it, fix the hash file to use the new spacing convention.
Fixes:
http://autobuild.buildroot.net/results/a9a7372615e3fbe4b8abda946706d1ccadf28931/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add 2 patches from upstream which are required to fix compilation,
Remove patch accepted upstream.
Update list of broken tests under musl (confstr01.c was fixed).
Refresh 0001-lapi-Add-sysinfo.h-to-fix-build-with-MUSL-libc.patch
(still carry it case there is somebody using old musl based toolchain).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with uclibc:
core/bootloader.c: In function 'register_bootloader':
core/bootloader.c:28:15: warning: implicit declaration of function 'reallocarray' [-Wimplicit-function-declaration]
28 | entry *tmp = reallocarray(available, num_available + 1, sizeof(entry));
| ^~~~~~~~~~~~
core/bootloader.c:28:15: warning: initialization of 'entry *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
[...]
.../arm-buildroot-linux-uclibcgnueabi/bin/ld: core/built-in.o: in function `register_bootloader':
(.text.register_bootloader+0x2c): undefined reference to `reallocarray'
Fixes:
http://autobuild.buildroot.net/results/46dc484759549162ec246e0bff2647995c307ab5/
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Many actual tests require network usage, so just import the module to
check that at least that part works.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes various build errors
In file included from ../src/hb-kern.hh:32:0,
from ../src/hb-ot-shape-fallback.cc:32:
../src/hb-ot-layout-gpos-table.hh:50:117: error: specialization of 'template<class context_t> static typename context_t::return_t OT::Layout::GPOS_impl::PosLookup::dispatch_recurse_func(context_t*, unsigned int)' in different namespace [-fpermissive]
introduced by bumping harfbuzz to 4.4.1 in
03022329e0
The build error was not yet caught by the autobuilders but can be
reproduced using this defconfig:
http://autobuild.buildroot.org/results/3fe7526b685368007ae0f66e15ef2b27d30d5063/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Contains various fixes some of which may effect pthread fork handling.
Add patch reverting a commit breaking builds.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add libmaxminddb optional dependency (which is enabled by default), two
options must be used to enable/disable this dependency:
[pairwise: --enable-geoip --with-maxminddb=auto, --enable-geoip --with-maxminddb=yes, --disable-geoip]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 4.0.0 contains various changes and fixes, including LC3
support and dbus changes.
Update the license file hash, following a copyright year change.
Signed-off-by: Andrea Daoud <andreadaoud6@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For the OpenSSL case, only OpenSSL is supported, as open62541 does not
build with LibreSSL.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove patches:
0001-CMakeLists.txt-project-only-contains-C-code.patch is replaced by
upstream commit df0fdefa967ae2523b7c90d61a0c8bc539ec2a69 which does
more, but addresses the same problem.
0002-arch-posix-CMakeLists.txt-fix-build-without-threads.patch is
upstream in commit c0298a9a6bfcc20cadaf54af640d82cabadfb64e.
0003-fix-core-Explicit-cast-to-avoid-compiler-warning.patch is
upstream in commit 0c53fd776af9631c915c8722e1d68ce9a69fa3f6.
0004-CMakeLists.txt-add-UA_FORCE_WERROR.patch is upstream in commit
5edb3a0283a8ea40de7f8cfa82aed2b16d95cf3e.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
wine unconditionally uses pthread_attr_setstack resulting in the
following build failure without NPTL:
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/i586-buildroot-linux-uclibc/11.3.0/../../../../i586-buildroot-linux-uclibc/bin/ld: dlls/ntdll/unix/thread.o: in function `NtCreateThreadEx':
thread.c:(.text+0x61b): undefined reference to `pthread_attr_setstack'
Fixes:
- http://autobuild.buildroot.org/results/a866d65cda97845a8c829acad2c057bab00cde08
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cJSON_Utils adds support for a few additional JSON RFCs. The size
increase is small (around 12K for ARM32), but it is more than half the
size of cJSON itself. So add a separate config option for cJSON_Utils.
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ZeroMQ added SO_PRIORITY in version 4.3.4, SO_BINDTODEVICE in 4.2.3, and
O_CLOEXEC since before 2.1.11. Checks for these feature are incompatible
with cross compilation. Linux supports SO_PRIORITY, and SO_BINDTODEVICE
since before 2.6. O_CLOEXEC is supported since 2.6.23. Keep them always
enabled.
Cc: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes build error
Checking for function "iconv_open" : NO
Header <iconv.h> has symbol "iconv_open" : NO
output/build/libpsl-0.21.1/meson.build:101:4:
ERROR: Problem encountered: iconv implementation not found
using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PACKAGE_LIBPSL=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop unneeded SED hacks (including build_tests) to fix the following
build failure with BR2_OPTIMIZE_FAST:
In file included from crypto/async/arch/../async_local.h:30,
from crypto/async/arch/async_null.c:11:
crypto/async/arch/../arch/async_posix.h:32:5: error: unknown type name 'ucontext_t'
32 | ucontext_t fibre;
| ^~~~~~~~~~
While at it, also "drop parentheses as all it does is spawn a useless
sub-shell" as noticed by Yann E. Morin
Fixes:
- http://autobuild.buildroot.org/results/3ce202f11a821940ff55eafa1dc7cea54b8c0da2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With U-Boot 2022.04 libuuid is required for building the host tool
mkeficapsule. The lib is included in the util-linux package. Thus the
BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX config is needed.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since U-Boot 2022.04 a host dependency to util-linux (-luuid) is required if
the U-Boot board configuration has CONFIG_TOOLS_MKEFICAPSULE enabled. So
introduce a new BR U-Boot config option
BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX to solve this problem.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit b01f19fb9361 ("pcsc_demo: change licence from GPLv3 to
BSD") in pcsclite, the license of pcsc_demo is BSD-3-Clause and not
GPL-3.0-or-later, so let's update the package license information.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
uacme configure script fails when libcurl does not support TLS. This
means that BR2_PACKAGE_LIBCURL_TLS_NONE is incompatible with uacme.
Add a kconfig knob to libcurl, BR2_PACKAGE_LIBCURL_FORCE_TLS, so that
_TLS_NONE is not an option. Select that from uacme.
Note that, beside selecting BR2_PACKAGE_LIBCURL_FORCE_TLS, packages will
have to also select a package that can be used as a crypto backend by
libcurl. Use of BR2_PACKAGE_LIBCURL_FORCE_TLS is unlikely to become very
common in the foreseeable future, so we don't need to optimize with
automatic selection of crypto backend.
uacme already needs a crypto package for itself, so the above
requirement is naturally met for uacme.
Fixes:
http://autobuild.buildroot.net/results/4e16f1d958ac3d30e26e7f17bdffc47834b0e2bd/http://autobuild.buildroot.net/results/4e16f1d958ac3d30e26e7f17bdffc47834b0e2bd/http://autobuild.buildroot.net/results/25280409b32282b4dd40b1e88127051439380f3d/
Cc: Nicola Di Lieto <nicola.dilieto@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr:
- keep the current forward select
- add the kconfig knob
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: tweak commit log with Baruch's suggestions]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop APG_CFLAGS (which is empty) to correctly set CFLAGS with
TARGET_CFLAGS (which will contain -static) passed by
TARGET_CONFIGURE_OPTS. Moreover, pass TARGET_CFLAGS to FLAGS which is
used to build apgbfm. This will fix the following musl static build
failure raised since the addition of the package in commit
99eb1a7019:
/home/buildroot/autobuild/instance-2/output-1/host/lib/gcc/armeb-buildroot-linux-musleabi/10.3.0/../../../../armeb-buildroot-linux-musleabi/bin/ld: /home/buildroot/autobuild/instance-2/output-1/host/lib/gcc/armeb-buildroot-linux-musleabi/10.3.0/libgcc.a(_dvmd_lnx.o): in function `__aeabi_ldiv0':
/home/buildroot/autobuild/instance-2/output-1/build/host-gcc-final-10.3.0/build/armeb-buildroot-linux-musleabi/libgcc/../../../libgcc/config/arm/lib1funcs.S:1499: undefined reference to `raise'
Fixes:
- http://autobuild.buildroot.org/results/0e53957965363ceb7141bf8a612998abec893b17
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bump will fix the following static build failure with berkeleydb
thanks to
31dac3e264:
/nvmedata/autobuild/instance-6/output-1/host/lib/gcc/mipsel-buildroot-linux-uclibc/10.3.0/../../../../mipsel-buildroot-linux-uclibc/bin/ld: lib/auto/DB_File/DB_File.a(DB_File.o): in function `ParseOpenInfo':
DB_File.c:(.text+0x7d30): undefined reference to `db_create'
Fixes:
- http://autobuild.buildroot.org/results/e01a042185b2221bee815bb9096c4419eeb6e558
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-pkgconf is only needed to find cryptopp when it is explicitly
enabled, but a check for pkg-config is still done either way.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: keep host-pkgconf as unconditional dep]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
d8c5d9b534 ("package/python-pillow:
enable host variant"), when support for the host variant of
python-pillow was added, the fact that python-pillow has optional
dependencies was not handled, and left python-pillow to autodetect its
optional dependencies.
Unfortunately, without some config options, some of its dependencies
are made mandatory, such as the JPEG library. Since for now such
support is not needed in the host variant of python-pillow, we simply
disable all optional dependencies.
To be consistent with the target variant, we also ensure to have
host-pkgconf as a dependency of the host variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
uClibc currently supports RISC-V with a soft-float or 64-bit
hard-float ABI, but not 32-bit hard-float. Selecting
BR2_RISCV_ABI_LP64F results in a build failure:
./include/sys/asm.h:42:4: error: #error unsupported FLEN
42 | # error unsupported FLEN
| ^~~~~
Change the conditions for BR2_PACKAGE_UCLIBC_ARCH_SUPPORTS
accordingly.
Fixes:
http://autobuild.buildroot.net/results/ac6e2c4369df46bad9a2ad46ce073e3f15f22ee6/
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
[Thomas: instead of !BR2_RISCV_ABI_LP64F, use BR2_RISCV_ABI_LP64 ||
BR2_RISCV_ABI_LP64D]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without threads raised since bump to
version 2.3.11 in commit 9b4914cc4c and
6df155fb21:
/home/buildroot/autobuild/run/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: ../DriverManager/.libs/libodbc.so: undefined reference to `pool_timedwait'
/home/buildroot/autobuild/run/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: ../DriverManager/.libs/libodbc.so: undefined reference to `pool_signal'
Fixes:
- http://autobuild.buildroot.org/results/131eafaddfc956c7d54c81ed72a31baf28ab1ab6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop host-gtest to avoid the following build failure raised since bump
to version 1.12.0 in commit a336b731af and
6202251f09:
/usr/bin/install -D -m 0755 /home/giuliobenetti/autobuild/run/instance-1/output-1/build/host-gtest-1.12.0/googlemock/scripts/generator/gmock_gen.py /home/giuliobenetti/autobuild/run/instance-1/output-1/host/bin/gmock_gen
/usr/bin/install: cannot stat '/home/giuliobenetti/autobuild/run/instance-1/output-1/build/host-gtest-1.12.0/googlemock/scripts/generator/gmock_gen.py': No such file or directory
Fixes:
- http://autobuild.buildroot.org/results/6a8fb259760f84c67a3482cc5964c6610f9b70a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
crucible is a useful tool that allows reading and writing
to the i.MX fuses via the Linux NVMEM framework.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This brings in support for OV5675 and IMX477 camera sensors, exposes
autofocus controls through the libcamera API, adds support for more
pixel and media bus formats, fixes AWB on IPU3, improves gstreamer
support and numerous other improvements and fixes.
Since commit fcb0ea001a2d "libcamera: Introduce YamlParser as a helper
to parse yaml files", libyaml is a required dependency since YAML is
used for configuration/tuning files.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The cam application requires libevent. Since there's no Kconfig option
for it, cam building ability is checked by meson build system by default.
If libevent is present in the sysroot, cam is built.
The issue is that there's no explicit dependency on libevent in
libcamera package. This means that it is possible for libevent AND
libcamera to be built, but have libcamera be built before libevent.
Meaning that even if all requirements seem to be fulfilled, cam still
won't be enabled in some cases.
This fixes the possible race by expliciting the dependency to libevent
if the libevent package is enabled. Otherwise, explicitly disable cam
building as it's already known that it isn't going to build.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
zerofree is a utility which scans the free blocks in an ext2 filesystem
and fills any non-zero blocks with zeroes.
https://frippery.org/uml/
The ext2fs/ext2fs.h header guards the inclusion of <sys/types.h> behind
HAVE_SYS_TYPES_H, which is an autotools-defined macro that is only
supposed to be defined by the package itself, i.e. e2fsprogs, and that
should not leak into installed headers. However, e2fsprogs does leak it,
so we work it around, liek gentoo does.
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix MMU dependency for comment; reword comment
- fix multi-line assignment of ZEROFREE_CFLAGS
- do not add comment trailing after assignment
- extend commit log to explain why we need the workaround
- use TARGET_CONFIGURE_OPTS, drop explicit CC=
- install to explicit destination file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following openssl build failure without threads raised since
bump to version 4.3.1 in commit 3a9cf51ab3 and
471dbf5280:
In file included from /home/buildroot/autobuild/instance-0/output-1/build/libwebsockets-4.3.1/include/libwebsockets.h:661,
from /home/buildroot/autobuild/instance-0/output-1/build/libwebsockets-4.3.1/lib/core/./private-lib-core.h:140,
from /home/buildroot/autobuild/instance-0/output-1/build/libwebsockets-4.3.1/lib/plat/unix/unix-misc.c:28:
/home/buildroot/autobuild/instance-0/output-1/build/libwebsockets-4.3.1/include/libwebsockets/lws-genhash.h:85:18: error: field 'ctx' has incomplete type
85 | HMAC_CTX ctx;
| ^~~
Fixes:
- http://autobuild.buildroot.org/results/2ae9e3249b6fcc9e6c30e7783e264fc6599e61df
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with ifupdown-scripts and
BR2_PER_PACKAGE_DIRECTORIES raised since commit
eed183e67e:
ln -sf ../if-up.d/wpasupplicant /nvmedata/autobuild/instance-11/output-1/per-package/wpa_supplicant/target/etc/network/if-down.d/wpasupplicant
ln: failed to create symbolic link '/nvmedata/autobuild/instance-11/output-1/per-package/wpa_supplicant/target/etc/network/if-down.d/wpasupplicant': No such file or directory
Fixes:
- http://autobuild.buildroot.org/results/fb35c29a966e21a29df5923e6d27ca372a4b4909
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Sub-options SPI and SDIO weren't rendering as nested options for
wilc-driver, instead showing on the same indent level. Move the
comment and depends on to bottom of file to correct this.
Fixes: 1a47c42b33 ("package/wilc-driver: add missing BR2_LINUX_KERNEL dependency")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with musl 1.2.3:
ola/AutoStart.cpp: In function 'ola::network::TCPSocket* ola::client::ConnectToServer(short unsigned int)':
ola/AutoStart.cpp:116:12: error: invalid cast from type 'std::nullptr_t' to type 'char*'
116 | reinterpret_cast<char*>(NULL));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/88be323e64f66433cabc962e719307b5fb6a6177
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libressl can be built with uclibc on noMMU since bump to version 3.0.2
in commit 26f42106e8 and
f542e84c85
However, uclibc-ng doesn't provide __register_atfork without NPTL
resulting in the following libressl build failure:
/nvmedata/autobuild/instance-28/output-1/host/lib/gcc/arceb-buildroot-linux-uclibc/10.3.0/../../../../arceb-buildroot-linux-uclibc/bin/ld: ../../tls/libtls.a(arc4random.c.o): in function `_rs_stir':
arc4random.c:(.text+0x50c): undefined reference to `__register_atfork'
So fix the dependency and, while at it, drop the double negation for
readability
Fixes:
- http://autobuild.buildroot.org/results/2fa4fa10cf19f1f942b6b49b5f6f05339c008cd4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a simple test to verify that msr-tools are working.
The test needs to build a custom x86_64 kernel with support for CPUID and
MSR.
As the TSC_AUX MSR is emulated on qemu we can use it to test that a value
written with wrmsr can indeed be read back with rdmsr.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bugfix release, fixes a WebKitWebProcess leak, MPRIS/MediaSession
support, adds a missing ATSPI a11y interface, and security patches
for CVE-2022-22677 and CVE-2022-26710.
Release notes:
https://webkitgtk.org/2022/07/05/webkitgtk2.36.4-released.html
Accompanying security advisory:
https://webkitgtk.org/security/WSA-2022-0006.html
One patch is now included in the packaged release, and another with a
build fix imported, which is actually a revert of a patch that made it
into the release but can cause linking issues when using LTO.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bugfix release, fixes a WPEWebProcess leak, MPRIS/MediaSession support,
adds a missing ATSPI a11y interface, and security patches for
CVE-2022-22677 and CVE-2022-26710.
Release notes:
https://wpewebkit.org/release/wpewebkit-2.36.4.html
Accompanying security advisory:
https://wpewebkit.org/security/WSA-2022-0006.html
One patch is not included in the packaged release, and another with a
build fix imported, which is actually a revert of a patch that made it
into the release but can cause linking issues when using LTO.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The previous location 'Libraries / Graphics' does not fit the purpose
of this package, we display it next to Pulseaudio instead.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
AES OCB fails to encrypt some bytes (CVE-2022-2097)
===================================================
Severity: MODERATE
AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised
implementation will not encrypt the entirety of the data under some
circumstances. This could reveal sixteen bytes of data that was
preexisting in the memory that wasn't written. In the special case of
"in place" encryption, sixteen bytes of the plaintext would be revealed.
Since OpenSSL does not support OCB based cipher suites for TLS and DTLS,
they are both unaffected.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds additional uboot build options that are
required for kria k26 soms.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move kconfig comment below the "if BR2_PACKAGE_BIND...endif" block so
that the two sub-options are presented in menuconfig as subordinate to
"bind" package selection rather than equal to it as if they were
unrelated.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with musl-fts raised since bump to
version 4.4.1 in commit cc66cf922b and
e1f4c2ac91:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: tcpreplay-tcpreplay.o: in function `main':
tcpreplay.c:(.text.startup+0x21c): undefined reference to `fts_open'
Fixes:
- http://autobuild.buildroot.org/results/e47940b5b158395329c0132bb1bbea429c4dc249
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The help section of "BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_REDUNDANT"
refers to U-Boot configuration option "CONFIG_ENV_SIZE_REDUND" which is
removed since U-Boot v2020.01, so remove this reference.
We may replace this with a reference to "CONFIG_ENV_OFFSET_REDUND" as
another indicator that a redundant environment image should be created.
This also fixes a minor typo in the same file.
Signed-off-by: Dominik Michael Rauh <dmrauh@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a custom case to make sure that a random configuration with an
empty tarball location for OP-TEE OS doesn't fail. It reverts to
BR2_TARGET_OPTEE_OS_LATEST in that case.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed unsecure md5 hash, upstream does not provide other hashes so we
keep our sha256 hash. Switched _SITE to http.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch to fix issue building with buildroot. The patch is already
accepted upstream.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Open-Source IPA shlibs need to be signed in order to be runnable within
the same process, otherwise they are deemed Closed-Source and run in
another process and communicate over IPC.
The shlib installed on the target should be the same as the one signed
by libcamera during package creation otherwise the signature won't match
the shlib.
Buildroot sanitizes RPATH in a post build process. meson gets rid of
rpath while installing so we don't need to do it manually.
Buildroot may strip symbols, so we need to do the same before signing.
Signing the IPA shlibs is done by the meson install target, so we need
to strip the IPA shlibs, so after the build but before the install,
which a post-build hooks fits the best.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[yann.morin.1998@free.fr: slight rewording of commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 776385d645:
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
OPENSSL_CRYPTO_LIBRARY (ADVANCED)
linked by target "uuu" in directory /home/buildroot/autobuild/instance-0/output-1/build/host-uuu-1.4.193/uuu
OPENSSL_SSL_LIBRARY (ADVANCED)
linked by target "uuu" in directory /home/buildroot/autobuild/instance-0/output-1/build/host-uuu-1.4.193/uuu
Fixes:
- http://autobuild.buildroot.org/results/2f05bc67112a59eba8f59ff707e43d76e41dbad1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The c_rehash script allows command injection (CVE-2022-2068)
============================================================
Severity: Moderate
In addition to the c_rehash shell command injection identified in
CVE-2022-1292, further circumstances where the c_rehash script does not
properly sanitise shell metacharacters to prevent command injection were
found by code review.
When the CVE-2022-1292 was fixed it was not discovered that there
are other places in the script where the file names of certificates
being hashed were possibly passed to a command executed through the
shell.
This script is distributed by some operating systems in a manner where
it is automatically executed. On such operating systems, an attacker
could execute arbitrary commands with the privileges of the script.
Use of the c_rehash script is considered obsolete and should be replaced
by the OpenSSL rehash command line tool.
https://www.openssl.org/news/secadv/20220621.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Gaël Portay is apparently no longer at Collabora:
<gael.portay@collabora.com>: host mail.collabora.co.uk[46.235.227.172] said:
550 5.1.1 <gael.portay@collabora.com>: Recipient address rejected: User
unknown in local recipient table (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2022-2085: A NULL pointer dereference vulnerability was found in
Ghostscript, which occurs when it tries to render a large number of bits
in memory. When allocating a buffer device, it relies on an
init_device_procs defined for the device that uses it as a prototype
that depends upon the number of bits per pixel. For bpp > 64,
mem_x_device is used and does not have an init_device_procs defined.
This flaw allows an attacker to parse a large number of bits (more than
64 bits per pixel), which triggers a NULL pointer dereference flaw,
causing an application to crash.
Drop patch (already in version)
https://www.ghostscript.com/doc/9.56.0/News.htmhttps://www.ghostscript.com/doc/9.56.1/News.htm
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the DP audio and video PLL configurations for the zynqmp-sm-k26-revA som.
It needs to be applied for both the kv260 and kr260 starter kits.
The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)
- DP system time clock PLL should use RPLL (0x3)
Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
Register 0xFD1A007C configures the DP system time clock PLL.
This patch was build and run tested on a zynqmp-kria-kv260 target board.
Upstream-Status: submitted (https://lore.kernel.org/all/fa7e9abc419c9d7648405d1c62367dbe701d09b8.1652709736.git.michal.simek@amd.com/)
This patch will be removed from buildroot in a future release when no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes an ATF issue by building the ATF for uart1 instead
of uart0 for the Kria KV260 Starter Kit.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch improves the documentation for kria k26 som qspi programming.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Peter: drop trailing spaces]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PJSIP is a free and open source multimedia communication library written
in C language implementing standard based protocols such as SIP, SDP,
RTP, STUN, TURN, and ICE. In versions prior to and including 2.12.1 a
stack buffer overflow vulnerability affects PJSIP users that use STUN in
their applications, either by: setting a STUN server in their
account/media config in PJSUA/PJSUA2 level, or directly using
`pjlib-util/stun_simple` API.
https://github.com/pjsip/pjproject/security/advisories/GHSA-26j7-ww69-c4qj
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Renumber patch
- Update hash of README.md (changes not related to license)
- FPIN support is fixed by setting LINUX_HEADERS_INCDIR and
63aa47d032
FPIN support is (wrongly) enabled if ELS_DTAG_LNK_INTEGRITY is defined
in /usr/include/scsi/fc/fc_els.h since bump to version 0.8.9 in commit
b790ff27d5 and
cfff03efbc
resulting in the following build failure:
In file included from /nvmedata/autobuild/instance-7/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/include/scsi/scsi_netlink_fc.h:25,
from fpin_handlers.c:6:
/nvmedata/autobuild/instance-7/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/include/scsi/scsi_netlink.h:44:2: error: unknown type name 'uint8_t'
44 | uint8_t version;
| ^~~~~~~
https://github.com/opensvc/multipath-tools/compare/0.8.9...0.9.0
Fixes:
- http://autobuild.buildroot.org/results/32f4ada6c49261924ca78f62dee43241bda379a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following guile build failure without NPTL raised since the
addition of bdwgc in commit b0476427f6 and
7896408d41:
configure:60776: checking for GC_is_heap_ptr
configure:60776: /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc -std=gnu11 -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O1 -g0 -DHAVE_GC_SET_FINALIZER_NOTIFIER -DHAVE_GC_GET_HEAP_USAGE_SAFE -DHAVE_GC_GET_FREE_SPACE_DIVISOR -DHAVE_GC_SET_FINALIZE_ON_DEMAND -flto -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -L/home/buildroot/autobuild/instance-2/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -latomic_ops -lgc -lpthread -ldl -latomic -lm >&5
/home/buildroot/autobuild/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-2/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libgc.so: undefined reference to `pthread_getattr_np'
[...]
In file included from ../libguile/alist.h:26,
from ../libguile.h:31,
from guile.c:38:
../libguile/pairs.h:205:1: error: conflicting types for 'GC_is_heap_ptr'
205 | GC_is_heap_ptr (void *ptr)
| ^~~~~~~~~~~~~~
In file included from ../libguile/bdw-gc.h:48,
from ../libguile/gc.h:142,
from ../libguile/pairs.h:26,
from ../libguile/alist.h:26,
from ../libguile.h:31,
from guile.c:38:
/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/gc/gc.h:551:20: note: previous declaration of 'GC_is_heap_ptr' was here
551 | GC_API int GC_CALL GC_is_heap_ptr(const void *);
| ^~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/819f231a60fc81f9a8dd07bf5411aa9d8f78c3bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For now only latest release and custom git repository was supported.
This patch adds support for custom tarball URL.
It also adds configuration verification for custom git repository and
tarball URL.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.rog> for the v2.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel is from upstream with a few extras to reduce the size of
the 'aspeed_g5' zImage because it is too big for the flash layout.
Mainline U-Boot has enough support to load the kernel from the flash
device and from network but it is still behind the OpenBMC branch
where most the development is done.
The main resulting file from the build is a flash image. The partition
layout matches the OpenBMC one for 32M chips. It makes it easier to
update the different partitions from Linux. Intermediate files can be
used to boot from U-Boot over the network or to boot QEMU using
-kernel/-initrd/-dtb.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel is from upstream and U-Boot is from the OpenBMC branch
because mainline doesn't have the required support for HW, yet.
The main resulting file from the build is a flash image. The partition
layout matches the OpenBMC one for 64M chips. It makes it easier to
update the different partitions from Linux. Intermediate files can be
used to boot from U-boot over the network or to boot QEMU using
-kernel/-initrd/-dtb.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following security issues:
- Heap buffer overflow in wavlike_ima_decode_block()
- Heap buffer overflow in msadpcm_decode_block()
- Heap buffer overflow in psf_binheader_readf()
- Index out of bounds in psf_nms_adpcm_decode_block()
- Heap buffer overflow in flac_buffer_copy()
- Heap buffer overflow in copyPredictorTo24()
- Uninitialized variable in psf_binheader_readf()
Drop patch (already in version)
While at it, also drop mention of CVE-2018-13419 which is correctly
tagged as only affecting version 1.0.28 in NVD NIST database:
https://nvd.nist.gov/vuln/detail/CVE-2018-13419https://github.com/libsndfile/libsndfile/releases/tag/1.1.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop patch (already in version) and so also drop autoreconf
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop patch (already in version) and so also drop autoreconf
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop first patch (already in version)
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable paxtest on microblaze to avoid the following build failure:
shlibtest.c:9:1: error: requested alignment '65536' exceeds object file maximum 32768
9 | char shbss[PAGE_SIZE_MAX] __pagealigned;
| ^~~~
Updating second patch to set PAGE_SIZE_MAX to 32768 will raise another
build failure:
/tmp/cccMSYDr.s: Assembler messages:
/tmp/cccMSYDr.s: Error: PC relative branch to label buf which is not in the instruction space
Fixes:
- http://autobuild.buildroot.org/results/aba489143b4017617f67c1012bba1f4687708380
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
More than five years ago, we added some patches to specific versions of
U-Boot. There is actually little point in maintaining patches for some
versions but not others. In addition, it's pretty unlikely that anyone
is using those specific old versions nowadays. Therefore, get rid of
those patches.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Copy the basic syntax of package/polkit/S50polkit and change the following:
- Add DAEMON, DAEMON_PATH, PIDFILE and DAEMON_ARGS variables.
- Fix shellcheck warning SC2166 on line 16.
- Fix shellcheck warning SC2181 on lines 29 and 34 by assigning the return
code from the start-stop-daemon binary to a variable, and then check the
value of the variable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch is a temporary fix for the kv260 u-boot.itb generation
until a proper fix has been implemented within u-boot.
The problem is u-boot can only be configured to use the kria k26
som dts configuration at build time, and the kv260 carrier board
overlay is missing from the build. Without this, all of the carrier
board drivers are missing.
This patch will be removed from buildroot once u-boot can build a
correct u-boot.itb for the kria kv260 starter kit including the
carrier board overlay and corresponding drivers:
https://lore.kernel.org/all/20920b0df6b067aca4040459a9677d7d1d6d766a.1615354376.git.viresh.kumar@linaro.org/
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[yann.morin.1998@free.fr: add URL provided by Luca]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot documentation section 9.2.1.6 "Additional kernel extensions"
indicates support for kernel extensions defined in external buildroot
trees but unfortunately, there didn't seem to be any support in
br2-external script.
This patch copies 'init' code support to include external kernel
extensions defined in 'linux' dir at the br2-external root directory as
explained in documentation.
Signed-off-by: Nicolas POIROT <ni.poirot@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop package as it doesn't build with latest kernel and project is not
maintained anymore: code has been removed in 2017 as driver is available
in the linux-next tree (cf.
3bb1d33ad9):
In file included from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/drv_types.h:25,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./core/rtw_cmd.c:17:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/autoconf.h:27:2: error: #error CONFIG_WIRELESS_EXT needs to be enabled for this driver to work
27 | #error CONFIG_WIRELESS_EXT needs to be enabled for this driver to work
| ^~~~~
In file included from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service.h:23,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/drv_types.h:27,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./core/rtw_cmd.c:17:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h: In function ‘_init_timer’:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h:97:8: error: ‘_timer’ {aka ‘struct timer_list’} has no member named ‘data’
97 | ptimer->data = (unsigned long)cntx;
| ^~
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h:98:2: error: implicit declaration of function ‘init_timer’; did you mean ‘_init_timer’? [-Werror=implicit-function-declaration]
98 | init_timer(ptimer);
| ^~~~~~~~~~
| _init_timer
Fixes:
- http://autobuild.buildroot.org/results/7a473e83d4a3d1e2228f4ee1282e85697de4ae5d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds a test case that
1) Builds the complete LLVM and CLANG set of host tools
2) Cross-compiles the compiler-rt runtime using CLANG
3) Builds a cross-compiled application using CLANG and the libfuzzer
compiler-rt library.
4) Executes the fuzz application (part of the libfuzzer package) on
target and checks expected output for a heap-buffer-overflow.
Note: The libfuzzer package is just a tutorial example of how to use
the toolkit provided by llvm (Thus not adding it as a full
Buildroot package).
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Romain Naour <romain.naour@smile.fr>
[Arnout: add Matt to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to use Clang as a host cross-compiler for Buildroot, we
need to provide at least the path to the sysroot (using
--sysroot) and some other compiler flags.
This series looks to reuse the toolchain wrapper for GCC since
Clang support most of the gcc flags used in the Buildroot's
toolchain wrapper. The only flag -mfused-madd (deprecated
since gcc 4.6) for mips is not supported by clang. Since
Clang require gcc >= 5.x this flag can never be used.
host-clang refers to an existing GCC-based toolchain (internal or
external) for libstdc++. However, a Buildroot external toolchain
gets a different BR_CROSS_PATH_SUFFIX. Therefore, we can't reuse the
toolchain-wrapper that gets built for the GCC-based toolchain, but
instead have to compile an additional clang-specific wrapper, called
toolchain-wrapper-clang.
After building the clang toolchain wrapper, create the symlinks needed
to force package infrastructure to use clang througt the wrapper.
Initially clang install the clang-8 binary and create all other symlinks:
# clang -> clang-8
# clang++ -> clang
# clang-8
# clang-cl -> clang
# clang-cpp -> clang
Use a post install hook to rename the clang-8 binary to clang-8.br_real
and recreate all symlinks:
# clang -> toolchain-wrapper-clang
# clang++ -> toolchain-wrapper-clang
# clang-8 -> toolchain-wrapper-clang
# clang-8.br_real
# clang++.br_real -> clang-8.br_real
# clang.br_real -> clang-8.br_real
# clang-cl -> toolchain-wrapper-clang
# clang-cl.br_real -> clang-8.br_real
# clang-cpp -> toolchain-wrapper-clang
# clang-cpp.br_real -> clang-8.br_real
NOTE: *.br_real symlinks are needed as the wrapper references them
Use the previously introduced CLANG_VERSION_MAJOR variable to create
theses symlinks.
Set BR_CROSS_PATH_SUFFIX to ".br_real" as for the Buildroot's internal
GCC toolchain backend to find the "real" clang binary installed in
$(HOST_DIR)/bin.
Borrow TOOLCHAIN_WRAPPER_BUILD and TOOLCHAIN_WRAPPER_INSTALL to
build and install the specific clang toolchain wrapper.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To build libfuzzer package Matthew Weber noticed that (host) clang
doesn't run on the host without "-B $(HOST_DIR)/opt/ext-toolchain"
option. This option add a new search path for binaries and object
files used implicitly.
Without -B clang fail to link due to missing crtbeging.o file and libgcc:
output/host/bin/aarch64-linux-gnu-ld: cannot find crtbegin.o: No such file or directory
output/host/bin/aarch64-linux-gnu-ld: cannot find -lgcc
Indeed, clang search path doesn't include the dafault cross-gcc's search paths:
$ output/host/bin/clang -print-search-dirs
programs: = output/host/bin:output/host/bin:/..//bin
libraries: = output/host/lib/clang/8.0.0:
output/host/bin/../lib64:
/lib/../lib64:
/usr/lib/../lib64:
output/host/bin/../lib:
/lib:/usr/lib
Here is the same command for cross-gcc:
$ output/host/bin/aarch64-linux-gnu-gcc -print-search-dirs
install: output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/
programs: = output/host/opt/ext-toolchain/bin/../libexec/gcc/aarch64-linux-gnu/8.3.0/:
output/host/opt/ext-toolchain/bin/../libexec/gcc/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/bin/aarch64-linux-gnu/8.3.0/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/bin/
libraries: = output/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/:
output/host/opt/ext-toolchain/bin/../lib/gcc/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/lib/aarch64-linux-gnu/8.3.0/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/lib/../lib64/:
output/host/aarch64-buildroot-linux-gnu/sysroot/lib/aarch64-linux-gnu/8.3.0/:
output/host/aarch64-buildroot-linux-gnu/sysroot/lib/../lib64/:
output/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/aarch64-linux-gnu/8.3.0/:
output/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/../lib64/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/lib/:
output/host/aarch64-buildroot-linux-gnu/sysroot/lib/:
output/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/
We can see that gcc default search path contains
"output/host/opt/ext-toolchain" directory where the external toolchain
has been extracted.
Since we want to use clang without additional option like -B,
patch clang in order to use GCC_INSTALL_PREFIX instead of
using automatic detection (which doesn't work for Buildroot).
We eventually want to relocate the Buildroot SDK containing the clang
cross-compiler, so we provide a relative path to GCC_INSTALL_PREFIX
in order to avoid to hardcode the path to the GCC toolchain.
Also the path between clang and the GCC external toolchain is not always
the same, we have the following case:
* Toolchain to be downloaded and installed
The toolchain is extracted into $(HOST_DIR)/opt/ext-toolchain, so the
path is "../opt/ext-toolchain".
* Pre-installed toolchain
The toolchain is localed somewhere in the host filesystem and
defined by the user using BR2_TOOLCHAIN_EXTERNAL_PATH.
So, set GCC_INSTALL_PREFIX using realpath:
-DGCC_INSTALL_PREFIX:PATH=`realpath --relative-to=$(HOST_DIR)/bin/ $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)`
When we use a Buildroot's internal toolchain, clang will find theses
crt*.o files and libgcc.
http://lists.busybox.net/pipermail/buildroot/2019-August/256204.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* Converts to the cmake pkg type
* Updates download site
* Adds a crosscompile fixups patch
* Allow prepare_builtins utility to be directly called
(it isn't installed into the path when cross compiling)
* Fix file_find() for root search limitation
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some packages such as libclc need to override cmake toolchain
variables, to avoid errors caused by trying to set overriden
variables ensure that they are not defined before being set.
This prevents difficult to debug silent dropping of overriden
variables.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
UUU (Universal Update Utility) is a Freescale/NXP I.MX Chip image deploy
tools. It is an evolution of MFGTools (aka MFGTools v3). For this and
for backward compatibility we have created a new package instead of
updating the mfgtools package.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Arnout: fix check-package warnings]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that all of the extlinux.conf files have been removed,
it is no longer necessary to check if the file exists.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch enables the zynqmp_kria_kv260_defconfig to auto-generate the
extlinux.conf file.
The board/zynqmp/kria/extlinux.conf and board/zynqmp/kria/post-build.sh have
been removed as they are no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch enables the zynqmp_zcu102_defconfig and zynqmp_zcu106_defconfig to
auto-generate the extlinux.conf file.
The board/zynqmp/extlinux.conf has been removed as it is no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch uses the BR2_ROOTFS_POST_SCRIPT_ARGS to auto-generate the
extlinux.conf file, so developers will only need to modify the
board_defconfig file to change the console and boot file system locations.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The support for this architecture has been removed from the upstream
Linux kernel, as of commit:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=aec499c75cf8e0b599be4d559e6922b613085f8f
Which states:
The nds32 architecture, also known as AndeStar V3, is a custom
32-bit RISC target designed by Andes Technologies. Support was added
to the kernel in 2016 as the replacement RISC-V based V5 processors
were already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
There has also been little to no maintenance done in Buildroot for
this architecture in recent times, so let's follow the Linux kernel
community decision and drop support for this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support from
Buildroot, drop the toolchain-external-andes-nds32 external toolchain
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support, remove the
only defconfig that used this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without SSP raised since the addition of
the package in commit f0d37e275a:
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/i686-buildroot-linux-musl/9.4.0/../../../../i686-buildroot-linux-musl/bin/ld: talloc.c.5.o: in function `_vasprintf_tc':
talloc.c:(.text+0x427d): undefined reference to `__stack_chk_fail_local'
Fixes:
- http://autobuild.buildroot.org/results/e221bde25c7622db99761d0adcd56663296beb15
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libmodsecurity embeds several mbedtls source files since version 3.0.0
and
a3ae686f25
resulting in the following static build failure if curl is built with
mbedtls support:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/buildroot/autobuild/instance-0/output-1/host/bin/../m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/libmbedcrypto.a(md5.c.o): in function `mbedtls_md5_free':
md5.c:(.text+0x16): multiple definition of `mbedtls_md5_free'; ../../src/.libs/libmodsecurity.a(libmbedtls_la-md5.o):md5.c:(.text+0x16): first defined here
Fixes:
- http://autobuild.buildroot.org/results/98472a3a41cdbcb3d02289a437074a267f4b2e8e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Instead of waiting almost 10 seconds foreground (3 discovery packets for
3 seconds retry delay) at each boot, make only one request then fork to
background. This way, the behavior is the same for working interfaces,
but it's way faster for interfaces where the address cannot be obtained
straight away.
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Actually, configuring a wifi interface as per "interfaces" man:
auto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
doesn't work on buildroot because the line wpa-conf is ignored due to
the lack of a proper ifupdown script to handle the wpa_supplicant
initialization.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Default configuration file is wrong for the default compiling options.
Fixes:
Successfully initialized wpa_supplicant
Line 1: unknown global field 'ctrl_interface=/var/run/wpa_supplicant'.
Line 1: Invalid configuration line
'ctrl_interface=/var/run/wpa_supplicant'.
Failed to read or parse configuration '/etc/wpa_supplicant.conf'.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a maintenance release includes important security updates that
fixes possible vulnerability in URL decoding (see the report attached
below). All the qDecoder users are recommended to upgrade to this
version as soon as possible.
Fix CVE-2022-32265
Update hash of COPYING (change in year and URL removed:
51bdcc2c15745878212d)
https://github.com/wolkykim/qdecoder/releases/tag/v12.1.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure on mips:
In file included from /nvmedata/autobuild/instance-15/output-1/build/libabseil-cpp-20211102.0/absl/base/internal/low_level_alloc.cc:26:
/nvmedata/autobuild/instance-15/output-1/build/libabseil-cpp-20211102.0/absl/base/internal/direct_mmap.h:49:10: fatal error: sgidefs.h: No such file or directory
49 | #include <sgidefs.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/3fa027e602bacb22316fb5d9b233baa0b0f0e845
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libnetfilter_conntrack dependency is wrongly duplicated since commit
b835171cf9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: drop from "main" _DEPENDENCIES instead]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libeastl needs threads since its addition in commit
ed9ddaafb2 and
800bc26659:
In file included from /home/autobuild/autobuild/instance-7/output-1/build/libeastl-45469730d641868ce05433fff2e199510c7d45c3/source/thread_support.cpp:7:
/home/autobuild/autobuild/instance-7/output-1/build/libeastl-45469730d641868ce05433fff2e199510c7d45c3/include/EASTL/internal/thread_support.h:37:18: fatal error: pthread.h: No such file or directory
37 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/54ff018467d157530bde4d35602fd1820d9eb348
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release announcement:
5.5.0: https://forum.minetest.net/viewtopic.php?f=18&t=27754
5.1.1: https://forum.minetest.net/viewtopic.php?p=410344#p410344
Back in 2021, the minetest project forked the irrlicht library due to
lack of upstream release [1]. But the irrlicht upstream project is not
really halted since a stable 1.8.5 version has been released [2] and
there is still svn activity.
But the Mintest fork (called irrlichtMt) is attractive since:
- It use a CMake build system instead of hand written makefiles [3]
- Bundled libraries has been removed [4] [5]
- It allows to remove the NEON support workaround for bundled libpng
- It use git as VCS
- Improve the licensing information
This irrlichtmt is required since mintest 5.5.0 version but contains
several changes specific to Minetest, so add irrlichtmt as additional
sources using EXTRA_DOWNLOADS.
minetest:
- Add zstd dependency for MapBlock compression [6]
- Freetype is now a build requirement for mintest client [7]
- gcc >= 5.x is now required [8]
- remove upstream patch [9]
minetest-game:
- Add new license files:
mods/keys/license.txt
mods/mtg_craftguide/license.txt
mods/weather/license.txt
[1] https://forum.minetest.net/viewtopic.php?p=393565
[2] https://irrlicht.sourceforge.io/forum/viewtopic.php?f=2&t=52775
[3] 6ce98dce77
[4] 67f1402410
[5] 264f8b72c1
[6] d1624a5521
[7] 76dbd0d2d0
[8] a90b2a4d4f
[9] 7c2826cbc0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: simplify symlink command]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since php-7.4 upstream switched to pkg-config to detect icu:
20fa2e7b58
Remove all unneeded code from php.mk.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Upstream removed the wddx extension with version 7.4:
6bbb18a0b6
and moved it to pecl: https://pecl.php.net/package/wddx
The pecl package is unmaintained however so we do not add it as a new
package to buildroot.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ABSL_RUN_TESTS has been replaced by the standard BUILD_TESTING option
(which is already passed by cmake infrastructure) since version
20210324.0 and
a50ae369a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
ossl_pkey.c: In function 'ossl_pkey_export_traditional':
ossl_pkey.c:681:62: error: invalid use of incomplete typedef 'EVP_PKEY' {aka 'struct evp_pkey_st'}
681 | EVP_PKEY_asn1_get0_info(NULL, NULL, NULL, NULL, &aname, pkey->ameth);
| ^~
Fixes:
- http://autobuild.buildroot.org/results/9b2622fbc4c2c2b787578ee83fc6a23795a84415
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix CVE-2022-1348: A vulnerability was found in logrotate in how the
state file is created. The state file is used to prevent parallel
executions of multiple instances of logrotate by acquiring and releasing
a file lock. When the state file does not exist, it is created with
world-readable permission, allowing an unprivileged user to lock the
state file, stopping any rotation. This flaw affects logrotate versions
before 3.20.
https://github.com/logrotate/logrotate/blob/3.20.1/ChangeLog.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit be38432532 wrongly assumed that
is_trivially_copy_constructible was available since gcc 4.9 but it
wasn't fully available until gcc 5.1 and
f5e523b76d
resulting in the following build failure with gcc 4.9.1:
In file included from /nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/internal/gtest-death-test-internal.h:39:0,
from /nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/gtest-death-test.h:41,
from /nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/gtest.h:64,
from /nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/src/gtest-all.cc:38:
/nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/gtest-matchers.h: In static member function 'static constexpr bool testing::internal::MatcherBase<T>::IsInlined()':
/nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/gtest-matchers.h:414:12: error: 'is_trivially_copy_constructible' is not a member of 'std'
std::is_trivially_copy_constructible<M>::value &&
^
Fixes:
- http://autobuild.buildroot.org/results/1723705cb7aea5f6fcc7e6722d866ed3bd098115
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This Bootlin toolchain has been available for a while, but was not
supported until now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The "arches" dict lists the architectures for which Bootlin toolchains
are available, along with the corresponding Buildroot conditions for
those architecture variants.
However, there is nothing that checks that such architectures really
have Bootlin toolchains available. Even if no toolchain is available,
the architecture is considered as support, and will be listed in the
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS option, making menuconfig
believe that some Bootlin toolchain is available for the selected
architecture variant.
This is currently the case with the "mips64" architecture (as
identified by the Bootlin toolchains project). Such toolchains have
been made obsolete in toolchains.bootlin.com and replaced by the
mips64-n32 toolchains. But "mips64" is still listed in "arches",
causing this architecture to be considered as having Bootlin
toolchains available.
To avoid this to happen in the future, this commit adds a check that
verifies that an architecture listed in "arches" really has at least
one toolchain available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some external toolchains do not have gdbserver available, but the
option BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY is always visible. And
when enabled, this option aborts with an error when gdbserver cannot
be found:
Could not find gdbserver in external toolchain
Due to that, some random configurations fail to build when
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y, for example with the Bootlin
toolchains for Microblaze or OpenRISC (because there's no GDB support
for those architectures).
One solution could be to make "Could not find gdbserver in external
toolchain" a warning instead of a hard error, but then nobody would
notice about this issue, in cases where it should legitimately abort
with a hard error.
So, the clean solution would be to add a
BR2_TOOLCHAIN_EXTERNAL_HAS_GDBSERVER. But that means all existing
external toolchains would have to be modified to select this option.
Instead, and as an exception, we chose to use inverted logic, and
create an option that is the opposite:
BR2_TOOLCHAIN_EXTERNAL_HAS_NO_GDBSERVER. By default, we assume
external toolchains have gdbserver. If
BR2_TOOLCHAIN_EXTERNAL_HAS_NO_GDBSERVER is enabled, we disallow the
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY option.
Note that the case of custom external toolchain does not matter: by
definition they are not tested by the autobuilders, and by definition,
we cannot know in menuconfig if the custom toolchain has or does not
have gdbserver. We could make a user-visible option for it, but that
adds no value over simply erroring out because the gdbserver binary
can't be found.
Similarly, we could add
default y if BR2_PACKAGE_GDB_ARCH_SUPPORTS
but that would make it impossible for someone to include a custom
gdbserver in their external toolchain, and gives no benefit at all.
This will help fixing:
http://autobuild.buildroot.net/results/6315ef7b66ee4ae8f870c92186bc674d65f62f2c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Bootlin i686 toolchain was already made available only on BR2_i386
with !BR2_x86_i486 && !BR2_x86_i586 && !BR2_x86_1000. However, this
was not sufficient as a few other architecture variants of BR2_i386
are "lower" than i686, and they need to be excluded as well.
Allows to fix:
http://autobuild.buildroot.net/results/56ac1a8fa5b34a9ca10eef98ae9fb090b8c762c4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current description of the Bootlin ARM toolchains allows them to
be selected for ARM big endian configurations, which obviously doesn't
work as these Bootlin ARM toolchains are little endian only.
We fix this by adding BR2_arm in the list of conditions for those
toolchains.
Will allow to fix:
http://autobuild.buildroot.net/results/7befbb686bb972016ba4e742976dcdb3fed1be11/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We now support both MMU-enabled and MMU-less RISC-V 64-bit
configurations. However, the Bootlin toolchain for RISC-V 64-bit only
supports MMU-enabled configurations, but the current logic in
toolchain/toolchain-external/toolchain-external-bootlin/ does not take
this into account, and allows selecting the Booltin toolchain for
MMU-less RISC-V 64-bit configurations.
To fix this, the gen-bootlin-toolchains script is modified to add the
BR2_USE_MMU dependency to the description of the RISC-V 64-bit
toolchain.
However, the BR2_USE_MMU dependency was also added for glibc and musl
toolchains unconditionally, so to avoid duplicating the dependency, we
now only add it only if not already present in the list of
dependencies for this toolchain.
This will allow to fix:
http://autobuild.buildroot.net/results/d6aee9b275b1ec399aea59758ac8f69fdc5691fc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable new unsupported bluez5-codec-lc3plus feature.
Drop patches that are now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Pass TARGET_LDFLAGS (which will contain -static) through LIBS (as
LDFLAGS is not supported) to fix the following static build failure
(e.g. with musl):
/home/autobuild/autobuild/instance-15/output-1/host/lib/gcc/microblazeel-buildroot-linux-musl/10.3.0/../../../../microblazeel-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-15/output-1/host/lib/gcc/microblazeel-buildroot-linux-musl/10.3.0/libgcc.a(unwind-dw2.o): in function `__gthread_once':
/home/autobuild/autobuild/instance-15/output-1/build/host-gcc-final-10.3.0/build/microblazeel-buildroot-linux-musl/libgcc/gthr-default.h:700: undefined reference to `pthread_once'
While at it, also pass TARGET_CFLAGS through LIBS as suggested by Thomas
Petazzoni
Fixes:
- http://autobuild.buildroot.org/results/5ea9b1b976aecc401e0aff21eef3e31c8ed17181
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: remove CPPFLAGS, already in CFLAGS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with BR2_PACKAGE_LIBMEDIAART_BACKEND_QT
raised since bump to version 1.9.5 in commit
3db4d486d6:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: libmediaart/libmediaart-2.0.so.0.905.0.p/extractqt.cpp.o: in function `std::__atomic_base<int>::operator--()':
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/sparc-buildroot-linux-uclibc/include/c++/10.3.0/bits/atomic_base.h:334: undefined reference to `__atomic_fetch_sub_4'
Fixes:
- http://autobuild.buildroot.org/results/39aa4ecd37de774e06f67a6e1c4495dc1f0917b4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix strndup detection as already done for strdup in commit
f9287b263f to avoid the following build
failure raised since bump to version 5.6.5 in commit
736932c715:
In file included from /nvmedata/autobuild/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/string.h:630:0,
from append.c:34:
dmalloc.h:396:7: error: expected identifier or '(' before '__extension__'
char *strndup(const char *string, const DMALLOC_SIZE max_len);
^
Fixes:
- http://autobuild.buildroot.org/results/2164dac43e2607a3570e8f98957a70f579d06cd3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move libzstd.pc in ZSTD_BUILD_LIBS so it will be suffixed by -nomt
without threads. As a result, libzstd.pc will not contain -pthread in
Libs.Private which will avoid the following static build failure with
zchunk) raised since commit 0f0e913f10:
/home/buildroot/autobuild/instance-2/output-1/host/bin/aarch64_be-buildroot-linux-uclibc-gcc -o src/unzck src/unzck.p/unzck.c.o src/unzck.p/util_common.c.o -Wl,--as-needed -Wl,--no-undefined -static -Wl,--start-group src/lib/libzck.a -largp /home/buildroot/autobuild/instance-2/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/lib/libzstd.a -pthread /home/buildroot/autobuild/instance-2/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/lib/libssl.a /home/buildroot/autobuild/instance-2/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a -Wl,--end-group
/home/buildroot/autobuild/instance-2/output-1/host/lib/gcc/aarch64_be-buildroot-linux-uclibc/10.3.0/../../../../aarch64_be-buildroot-linux-uclibc/bin/ld: cannot find -lpthread
Fixes:
- http://autobuild.buildroot.org/results/481d1979920daaecac48dec763151e124651740f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libnetconf2 doesn't build with libressl which doesn't provide
X509_STORE_CTX_get1_certs resulting in the following build failure with
netopeer2:
[100%] Linking C executable netopeer2-server
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblaze-buildroot-linux-gnu/11.2.0/../../../../microblaze-buildroot-linux-gnu/bin/ld: /home/buildroot/autobuild/instance-3/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/lib/libnetconf2.so: undefined reference to `X509_STORE_CTX_get1_certs'
Fixes:
- http://autobuild.buildroot.org/results/7f9a114a477e859dfbc62a53ab66c58eddb2318b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
m68k is supported since version 20210324.0 and
f3697b4fed
s390x is supported since at least version 20180600 and
a7e522daf1
sh is supported since version 20210324.0 and
a2d7f453c6
sparc and sparc64 are supported since version 20210324.0 and
3fcd00d7dd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS is not enabled when ARMv8
target hardware is combined with 32-bit software. That is because ARMv7
(32-bit) toolchain is only enabled for BR2_ARM_CPU_ARMV7A which is
mutually exclusive with BR2_ARM_CPU_ARMV8A.
Use ARMv7 toolchain for 32-bit software.
Cc: James Hilliard <james.hilliard1@gmail.com>
Reported-by: Oscar Gomez Fuente <oscargomezf@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix libexecinfo workaround to avoid the following ffmpeg build failure
with BR2_PACKAGE_RPI_USERLAND raised on uclibc and musl since commit
bc4cc27705:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/arm-linux-gcc --sysroot=/home/giuliobenetti/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot -mcpu=arm926ej-s -Wl,--as-needed -Wl,-z,noexecstack -o /tmp/ffconf.5K0cMIh3/test /tmp/ffconf.5K0cMIh3/test.o -lmmal_core -lmmal_util -lmmal_vc_client -lbcm_host -latomic
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libvcos.so: undefined reference to `backtrace_symbols'
[...]
ERROR: mmal not found
Fixes:
- http://autobuild.buildroot.org/results/64d21872d25fef35b72106133ed2aed300f52f2f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Manuel Vögele has privately requested to be removed from the
DEVELOPERS file as he is no longer involved with Buildroot
usage/development.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
DRI support for this driver is provided by the xserver_xorg-server
package when BR2_PACKAGE_HAS_LIBGL is enabled:
https://git.busybox.net/buildroot/tree/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk#n91
Change the dependency to follow the logic of xserver_xorg-server.
Build-tested using these defconfigs:
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_TDFX=y
and
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_TDFX=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
DRI support for this driver is provided by the xserver_xorg-server
package when BR2_PACKAGE_HAS_LIBGL is enabled:
https://git.busybox.net/buildroot/tree/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk#n91
Change the dependency to follow the logic of xserver_xorg-server.
Build-tested using these defconfigs:
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_SAVAGE=y
and
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_SAVAGE=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
DRI support for this driver is provided by the xserver_xorg-server
package when BR2_PACKAGE_HAS_LIBGL is enabled:
https://git.busybox.net/buildroot/tree/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk#n91
Change the dependency to follow the logic of xserver_xorg-server.
Build-tested using these defconfigs:
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_SIS=y
and
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_SIS=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
DRI support for this driver is provided by the xserver_xorg-server
package when BR2_PACKAGE_HAS_LIBGL is enabled:
https://git.busybox.net/buildroot/tree/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk#n91
Change the dependency to follow the logic of xserver_xorg-server.
Build-tested using these defconfigs:
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_MGA=y
and
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_MGA=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The package depends on gbm:
https://gitlab.freedesktop.org/xorg/driver/xf86-video-amdgpu/-/blob/master/configure.ac#L75
This dependency was always there. However, previously it was implicit
from the mesa3d dependencies. Since we made libgbm a virtual package, it
is possible that libgbm is selected in another way. Note that the
original dependencies would always for libgbm in mesa3d, so this was not
causing any build failures.
Also explicitly add libgbm to _DEPENDENCIES. Previously, this was
implied by the mesa3d dependency in xserver, but this is no longer true
for other gbm providers.
For details see
http://lists.busybox.net/pipermail/buildroot/2022-April/641451.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Without CA bundle curl can not verify the remote peer and work with https.
This is fixed by adding a config option pointing to the default location
for CA bundle in buildroot. Alternatives like OpenSSL and MbedTLS use the
same path, however the wolfSSL build options for libcurl did not include
this path until now.
Signed-off-by: Dimitar Tomov <dimi@tpm.dev>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit is simply the result of regenerating the
toolchain-external-bootlin package after gen-bootlin-toolchains was
changed in commit "support/scripts/gen-bootlin-toolchains: properly
take into account !BR2_STATIC_LIBS for glibc toolchains".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Config.in options created for each toolchain were properly taking
into account the !BR2_STATIC_LIBS dependency of glibc
toolchains. However, this dependency was not taken into account into
the main BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS
option. Consequently, if an architecture is only supported by glibc,
but BR2_STATIC_LIBS is enabled, the main "Bootlin toolchain" option
was visible... but with no selectable toolchain.
We fix this by making sure that
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS is only true for all
architectures supported, taking into account the fact that some
architectures can only be supported if !BR2_STATIC_LIBS, when the only
available C library is glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Following commit
e59b3acc36 ("toolchain/glibc: Restrict
ppc64le support to power8"), when selecting ppc64le as the
architecture, it is possible to end up with a selection for which no C
library is provided.
Indeed:
- glibc only supports Power8
- uclibc has no support for ppc64le at all
- musl only supports ppc64le processors that have Altivec support
Therefore, this commit adds "depends on !BR2_powerpc64le" to those
PowerPC architecture variants for which no C library support exists.
Fixes:
http://autobuild.buildroot.net/results/3f6fb1c2d5648e78f7856bdea3171b5a89dfa2f9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
mono unconditionally uses pthread_attr_get_np and so needs NTPL since
version 4.0.1.43 and
748fefa1d7:
mono-threads-linux.c: In function 'mono_threads_platform_get_stack_bounds':
mono-threads-linux.c:26:15: error: implicit declaration of function 'pthread_getattr_np'; did you mean 'pthread_attr_init'? [-Werror=implicit-function-declaration]
26 | res = pthread_getattr_np (pthread_self (), &attr);
| ^~~~~~~~~~~~~~~~~~
| pthread_attr_init
Fixes:
- http://autobuild.buildroot.org/results/6534ee4ae699c17ee98f6f89a8a1212936e04481
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without a working Fortran compiler:
CMake Error at /nvmedata/autobuild/instance-17/output-1/host/share/cmake-3.18/Modules/CMakeTestFortranCompiler.cmake:51 (message):
The Fortran compiler
"/usr/bin/f95"
is not able to compile a simple test program.
Fixes:
- http://autobuild.buildroot.org/results/37f3f40ee39739b5e557d634b71a448762107a4b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gensio needs atomic since bump to version 2.0.1 in commit
0f8d4a6ecd and
5528267b54:
/nvmedata/autobuild/instance-7/output-1/per-package/gensio/host/bin/../lib/gcc/arc-buildroot-linux-uclibc/11.3.0/../../../../arc-buildroot-linux-uclibc/bin/ld: ../lib/.libs/libgensio.a(gensio_osops.o): in function `gensio_addr_dup':
gensio_osops.c:(.text+0x1558): undefined reference to `__atomic_fetch_add_4'
Fixes:
- http://autobuild.buildroot.org/results/229e4bd1ba1787953899875ab56721c9609f035a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following musl build failure raised with pam and libressl:
auth-pam.c: In function 'pam_server':
auth-pam.c:894:23: error: 'PATH_MAX' undeclared (first use in this function); did you mean 'AF_MAX'?
894 | char ac_file_name[PATH_MAX];
| ^~~~~~~~
| AF_MAX
auth-pam.c:894:23: note: each undeclared identifier is reported only once for each function it appears in
auth-pam.c:894:10: warning: unused variable 'ac_file_name' [-Wunused-variable]
894 | char ac_file_name[PATH_MAX];
| ^~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/c8834fa5ddcac6fd22fc9406e10221e64cdb8856
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In this commit BR2_PACKAGE_MUSL_SUPPORTS looks redundant with
BR2_PACKAGE_MUSL_ARCH_SUPPORTS, but for other C libraries, like glibc,
it can be different.
To be consistent, we use the same pattern for musl.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In this commit BR2_PACKAGE_UCLIBC_SUPPORTS looks redundant with
BR2_PACKAGE_UCLIBC_ARCH_SUPPORTS, but for other C libraries, like glibc,
it can be different.
To be consistent, we use the same pattern for uClibc.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As part of this, the dependency of the comment "glibc needs a
toolchain w/ dynamic library, kernel headers >= 3.2" is changed to use
BR2_PACKAGE_GLIBC_ARCH_SUPPORTS instead of just BR2_USE_MMU, so that
the comment only appears on architectures for which glibc is supported
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
sigsegv.c: In function 'sigsegv_handler':
sigsegv.c:225:75: error: 'mcontext_t' has no member named 'uc_regs';
did you mean 'gregs'?
((ucontext_t *) ucp)->uc_mcontext.uc_regs->gregs[1]
Musl defines pt_regs differently to glibc. Backport a patch from
upstream gnulib (the source for this file in diffutils).
Fixes:
http://autobuild.buildroot.net/results/1b40146436eb2b3500d0d8faef96b3374f8e5cda/
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
In file included from ../xsec/enc/OpenSSL/OpenSSLCryptoBase64.hpp:36:0,
from enc/OpenSSL/OpenSSLCryptoKeyRSA.cpp:35:
../xsec/enc/OpenSSL/OpenSSLSupport.hpp:92:20: error: field 'mp_ctx_store' has incomplete type 'EVP_ENCODE_CTX {aka evp_Encode_Ctx_st}'
EVP_ENCODE_CTX mp_ctx_store;
^~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e908e59ec5b8e1ac505c44900dcb39527f0ec1d3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 3.20 is the first one where the following issue is fixed:
https://gitlab.kitware.com/cmake/cmake/-/issues/18299
Was affected by this bug and decide to bump the version to the
latest stable
The Copyright.txt changed with minor changes (see below) and therefore
its hash is updated.
@@ -1,5 +1,5 @@
CMake - Cross Platform Makefile Generator
-Copyright 2000-2020 Kitware, Inc. and Contributors
+Copyright 2000-2021 Kitware, Inc. and Contributors
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -65,8 +65,8 @@
* Jan Woetzel
* Julien Schueller
* Kelly Thompson <kgt@lanl.gov>
-* Laurent Montel <montel@kde.org>
* Konstantin Podsvirov <konstantin@podsvirov.pro>
+* Laurent Montel <montel@kde.org>
* Mario Bensi <mbensi@ipsquad.net>
* Martin Gräßlin <mgraesslin@kde.org>
* Mathieu Malaterre <mathieu.malaterre@gmail.com>
Signed-off-by: Andrey Nechypurenko <andreynech@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hash of the license file is changed due to a copyright year
change:
-Copyright (c) 2015 José Padilla
+Copyright (c) 2015-2022 José Padilla
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License file hash is changed, due to a copyright year change:
- Copyright (C) 2002-2021 GraphicsMagick Group
+ Copyright (C) 2002-2022 GraphicsMagick Group
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to last version of gcnano-binaries compatible with kernel
from StMicroelectronics version 5.10
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some specific versions of OP-TEE need the python-pillow module on the
host to build support for the TUI (Trusted User Interface) feature.
To allow building such OP-TEE versions, this commit adds the option
BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_PILLOW which when enabled ensures
that host-python-pillow is built before OP-TEE.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit enables the host variant of the python-pillow package, as
it is needed as a dependency to build some specific versions of
OP-TEE.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
RAUC 1.7 introduces streaming update support. Make this configurable
and add required dependency to libnl.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump to version 1.5 in
commit 41bbe8df54 and
be55282d71:
In file included from /nvmedata/autobuild/instance-22/output-1/host/bin/../sparc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0/glib.h:62,
from src/verity_hash.c:26:
src/verity_hash.c: In function 'verify_zero':
src/verity_hash.c:69:55: error: expected ')' before 'PRIu64'
69 | g_message("Spare area is not zeroed at position %" PRIu64 ".",
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1a093c0e194a061836884419d2f50506105db01e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream has released a new version. In this version, they
have chosen to copy the conditional compilation of tools,
however they have chosen to use DISABLE_* flags instead
of ENABLE_* flags. Therefore, the logic in our .mk file
has been reversed: when an option is *NOT* selected, we
set the corresponding DISABLE_* flag.
As a corollary, the patch to add conditional compilation
in the upstream Makefile is no longer needed and is
removed in this commit.
Tested compilation by running `./utils/test-pkg -a` with
a configuration that enables all options tools.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Tested-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
go1.18.3 includes security fixes to the crypto/rand, crypto/tls, os/exec,
and path/filepath packages, as well as bug fixes to the compiler, and the
crypto/tls and text/template/parse packages.
https://go.dev/doc/devel/release#go1.18
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with argp-standalone and NLS raised
since commit 5430c8fedd:
configure:6091: /home/autobuild/autobuild/instance-3/output-1/host/bin/x86_64-buildroot-linux-musl-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -largp >&5
/home/autobuild/autobuild/instance-3/output-1/host/lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib/../lib64/libargp.a(argp-parse.o): in function `argp_version_parser':
/home/autobuild/autobuild/instance-3/output-1/build/argp-standalone-1.4.1/argp-parse.c:181: undefined reference to `libintl_dgettext'
[...]
checking for library containing argp_parse... no
configure: error: An implementation of GNU Argp was not found, please install libargp
Fixes:
- http://autobuild.buildroot.org/results/3d2d9e27aabcd6763510238087fe25d5273d3535
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit fixes a build error when the host environment has GOOS set to
something other than "linux." For example,
cd ./buildroot
GOOS="js" make
This will cause a build failure. Override GOOS to be either empty for host
packages or set to "linux" for target packages.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gtest unconditionally uses is_trivially_copy_constructible since
version 1.11.0 and
c13c27a513
So add a dependency on host gcc >= 4.9 for gmock to avoid the following
build failure since commit 9dfbbbb410:
In file included from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/internal/gtest-death-test-internal.h:39:0,
from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/gtest-death-test.h:41,
from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/gtest.h:64,
from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/src/gtest-all.cc:38:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/gtest-matchers.h: In static member function 'static constexpr bool testing::internal::MatcherBase<T>::IsInlined()':
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/gtest-matchers.h:414:12: error: 'is_trivially_copy_constructible' is not a member of 'std'
std::is_trivially_copy_constructible<M>::value &&
^
Fixes:
- http://autobuild.buildroot.org/results/9d19a47deb80824eaa718d80f14b0afd5f9eb054
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable cloud to avoid the following build failures raised since bump to
version 1.33.1 in commit 73dc2eef2d and
e7e5d0c372:
In file included from aclk/aclk.c:7:
aclk/aclk_otp.h:11:23: error: unknown type name 'RSA'
11 | int aclk_get_mqtt_otp(RSA *p_key, char **mqtt_id, char **mqtt_usr, char **mqtt_pass, url_t *target);
| ^~~
aclk/aclk.c:48:8: error: unknown type name 'RSA'
48 | static RSA *aclk_private_key = NULL;
| ^~~
aclk/aclk.c: In function 'load_private_key':
aclk/aclk.c:52:9: warning: implicit declaration of function 'RSA_free' [-Wimplicit-function-declaration]
52 | RSA_free(aclk_private_key);
| ^~~~~~~~
aclk/aclk.c:65:5: error: unknown type name 'BIO'; did you mean 'EIO'?
65 | BIO *key_bio = BIO_new_mem_buf(private_key, -1);
| ^~~
| EIO
[...]
In file included from database/sqlite/../../aclk/aclk.h:6:0,
from database/sqlite/sqlite_aclk.c:10:
database/sqlite/../../aclk/aclk_util.h:6:29: fatal error: mqtt_wss_client.h: No such file or directory
compilation terminated.
Fixes:
- http://autobuild.buildroot.org/results/6c87c0d1699fd518a989cb81a191419f427accc5
- http://autobuild.buildroot.org/results/aa77c027316b45e812eaf9ced61fb8e967bb987f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a patch to fix a build failure due to the target GOARCH being used while
bootstrapping the Go compiler with the go-bootstrap compiler.
Uses the host architecture variable instead.
This commit updates the patch with improvements from the upstream PR.
PR: https://github.com/golang/go/pull/52362
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
While reading the docs to find hooks, I completely missed the
LIBFOO_TARGET_FINALIZE_HOOKS one which was actually matching my
use-case.
Though it is documented in a subsection a few lines below, let's also
have it in the list of supported hooks so it's not hidden away.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gcc-12 is starting to trickle down to some distros, like Archlinux.
gcc-12 has new warnings, and detects more cases of issues, like new
UAF cases, which is causing build issues in code that was previously
building fine, as reported in #14826:
In file included from sigchain.c:3:
In function 'xrealloc',
inlined from 'sigchain_push.isra' at sigchain.c:26:2:
subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
In that case, the kernel has already fixed their code, which is part of
5.17:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=52a9dab6d892763b2a8334a568bd4e2c1a6fde66
However, we can't easily carry that patch, because we don't know
whether the kernel the user uses already has the fix or not.
Instead, we can just tell the kernel to disable use of -Werror when
building host tools.
As a consequence, we can drop it from the perf-specific setting.
Fixes: #14826
Reported-by: Anders Pitman <buildroot@apitman.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some constraints on a setup ended up with a plus sign in the path
for historical reasons and would then fail to match on the comparison
of the host/lib dir match. So, the =~ for bash can be augmented
with a double quote expansion to preserve the literal value of
the characters in the variable.
Example Path: /home/vagrant/test+buildroot/per-package
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
By default the toolchain-wrapper enable -fPIE to the build of all packages.
TF-A support Position Independent Executable(PIE) only in few build cases,
therefore it should be disable by default.
If you still want to enable PIE, TF-A provide a "ENABLE_PIE" build options
that will override the cflags for the supported cases.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[Peter: Only do so for BR2_PIC_PIE]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt 2.2.5 was released on May 16, 2022: this is a bug-fix release,
fixing two issues with libgsasl authentication.
Mutt 2.2.4 was released on April 30, 2022: this is a bug-fix release,
fixing some regressions with Maildir/mh mailbox path normalization that
were added in 2.2.0. Please see the UPDATING file for more details.
https://gitlab.com/muttmua/mutt/-/blob/mutt-2-2-5-rel/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It turns out that we can build cpulimit for or1k using musl-libc if we
remove the inclusion of the problematic procfs.h header file which is
not required at all. This is a backport of the following upstream pull
request:
https://github.com/opsengine/cpulimit/pull/110
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update seatd to version 0.7.0, which includes a flurry of small fixes
and removes usage of the SEATD_SOCK and SEATD_LOGLEVEL environment
variables (the latter replaced by a command line switch).
Release notes: https://git.sr.ht/~kennylevinsen/seatd/refs/0.7.0
The -Dlibseat-logind= option now needs the "systemd" value when the
logind backend is systemd-logind, this patch adapts usage of the build
option accordingly.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Change the site from sourceforge to pypi.
- Remove upstream or uneeded patches.
- Change qtdetail.out to qtcore, as the qtdetail.out file is now QtCore.out
- Remove the QtWebEngineCore module, as the module has been moved to a separat
PyQtWebEngine package.
- Add the --assume-shared option as Buildroot forces QT5 to be built as a shared
library.
- Parallel install is not supported, as some install targets depend on
previously installed targets first.
Tested with test-pkg -p python-pyqt5 -a in an ubuntu 20.04 container.
45 builds, 10 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version is the minimum version needed to support newer versions of PyQT.
Changes:
- Update the URL as this version is not hosted on sourceforge.
- Add --no-stubs to prevent the error: No such file or directory: sip.pyi
- Add 0001-remove-join-from-sip-h-files-string.patch to prevent python-sip
from attempting to copy the entire hosts /usr directory when
installing.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with kernel >= 5.17 thanks to
7e61ad89cc:
/home/autobuild/autobuild/instance-14/output-1/build/rtl8812au-aircrack-ng-3a6402e9e79802891f1531b435be54f4d8b71f0b/./os_dep/osdep_service.c: In function ‘thread_exit’:
/home/autobuild/autobuild/instance-14/output-1/build/rtl8812au-aircrack-ng-3a6402e9e79802891f1531b435be54f4d8b71f0b/./os_dep/osdep_service.c:1295:2: error: implicit declaration of function ‘complete_and_exit’ [-Werror=implicit-function-declaration]
1295 | complete_and_exit(comp, 0);
| ^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1fff5023b5b79a7d81fd4cba6dea8dcb3f428340
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since U-Boot 2022.04 a host dependency to gnutls is required if the
U-Boot board configuration has CONFIG_TOOLS_MKEFICAPSULE enabled. So
introduce a new BR U-Boot config option BR2_TARGET_UBOOT_NEEDS_GNUTLS
to solve this problem.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2022-29162
Minor security issue (which appears to not be exploitable) related to process
capabilities.
A bug was found in runc where runc exec --cap executed processes with ble Linux
process capabilities, creating an atypical Linux environment. For more
information, see GHSA-f3fp-gc8g-vw66 and CVE-2022-29162.
runc spec no longer sets any inheritable capabilities in the created example OCI
spec (config.json) file.
https://github.com/opencontainers/runc/releases/tag/v1.1.2
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The wolfssl package installs $(STAGING_DIR)/usr/bin/wolfssl-config,
which needs to be post-processed to return correct results. Use
<pkg>_CONFIG_SCRIPTS to achieve this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
wolfTPM is an open-source TPM 2.0 stack with backward API compatibility,
designed for embedded use. It is highly portable, and has native support
for Linux. wolfTPM has a compact code size with low resource usage.
Signed-off-by: Dimitar Tomov <dimi@tpm.dev>
[Thomas:
- Fix ordering in the DEVELOPERS file, use full name
- Add missing !BR2_STATIC_LIBS dependency
- Use "select" and not "select on"
- Make sure wolftpm-config script gets post-processed by using
<pkg>_CONFIG_SCRIPTS
- Add missing --with-wolfcrypt option.
- Rename WOLFTPM_CONFIG_RPATH to WOLFTPM_TOUCH_CONFIG_RPATH and use
mkdir -p to make the hook re-executable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump to version 1.5 in
commit 41bbe8df54 and
be55282d71:
In file included from /nvmedata/autobuild/instance-22/output-1/host/bin/../sparc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0/glib.h:62,
from src/verity_hash.c:26:
src/verity_hash.c: In function 'verify_zero':
src/verity_hash.c:69:55: error: expected ')' before 'PRIu64'
69 | g_message("Spare area is not zeroed at position %" PRIu64 ".",
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1a093c0e194a061836884419d2f50506105db01e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And update the patches accordingly. Also add a patch to adjust the
includes to find the corresponding libraries.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The copyright year in the license file has been updated to 2022, hence
the new license hash.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The copyright year in the license file has been updated to 2022, hence
the new license hash.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The copyright year in the license file has been updated to 2022, hence
the new hash for the license.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove the unicode_util_compat library, which is not needed for the
erlang version packaged in Buildroot.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
WebKitGTK works just fine on RISC-V. For the current stable version the
build system automatically picks the LLint JavaScript interpreter, and
the upcoming 2.38.x release series will include (and automatically
enable) JIT support.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
WPE WebKit works just fine on RISC-V. For the current stable version
the build system automatically picks the LLint JavaScript interpreter,
and the upcoming 2.38.x release series will include (and automatically
enable) JIT support.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following uclibc build failure:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-buildroot-linux-uclibc/10.3.0/../../../../mipsel-buildroot-linux-uclibc/bin/ld: src/pipewire/libpipewire-0.3.so.0.351.0.p/introspect.c.o: in function `pw_node_info_merge':
/home/buildroot/autobuild/instance-0/output-1/build/pipewire-0.3.51/build/../src/pipewire/introspect.c:216: undefined reference to `reallocarray'
Fixes:
- http://autobuild.buildroot.org/results/374582f75713c4116ae23f972c5bc55214879502
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building with BR2_cortex_a76 in big endian mode, the build of
the kvm-unit-tests is currently failing since the "--arch" option
of the configure script is not set right. We also have to look at
BR2_aarch64_be in this case to get this initialized properly.
Fixes: f7228dadd3 ("package/kvm-unit-tests: add more arm support")
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arc-buildroot-linux-uclibc/10.2.0/../../../../arc-buildroot-linux-uclibc/bin/ld: ../lib/.libs/libboinc.a(libboinc_la-diagnostics.o): in function `boinc_catch_signal':
diagnostics.cpp:(.text+0x8a): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/4504379b464eb144a4c257001eb4d316bb1f5e44
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2021-29338: Integer Overflow in OpenJPEG v2.4.0 allows remote
attackers to crash the application, causing a Denial of Service (DoS).
This occurs when the attacker uses the command line option "-ImgDir" on
a directory that contains 1048576 files.
Fix CVE-2022-1122: A flaw was found in the opj2_decompress program in
openjpeg2 2.4.0 in the way it handles an input directory with a large
number of files. When it fails to allocate a buffer to store the
filenames of the input directory, it calls free() on an uninitialized
pointer, leading to a segmentation fault and a denial of service.
Drop patches (already in version)
https://github.com/uclouvain/openjpeg/blob/v2.5.0/NEWS.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2022-1619: Heap-based Buffer Overflow in function
cmdline_erase_chars in GitHub repository vim/vim prior to 8.2.4899. This
vulnerabilities are capable of crashing software, modify memory, and
possible remote execution
Fix CVE-2022-1620: NULL Pointer Dereference in function
vim_regexec_string at regexp.c:2729 in GitHub repository vim/vim prior
to 8.2.4901. NULL Pointer Dereference in function vim_regexec_string at
regexp.c:2729 allows attackers to cause a denial of service (application
crash) via a crafted input.
Fix CVE-2022-1621: Heap buffer overflow in vim_strncpy find_word in
GitHub repository vim/vim prior to 8.2.4919. This vulnerability is
capable of crashing software, Bypass Protection Mechanism, Modify
Memory, and possible remote execution
Fix CVE-2022-1629: Buffer Over-read in function find_next_quote in
GitHub repository vim/vim prior to 8.2.4925. This vulnerabilities are
capable of crashing software, Modify Memory, and possible remote
execution
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extract from
1bc60d4ba2:
"NOTE TO MAINTAINERS: libee is not used by rsyslog for quite some while.
However, we never included this info into the changelog. So if you still
make rsyslog depend on libee (some do this), you should stop doing so
now. Libee is dead and no longer been maintained nor hosted by us."
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with giflib and gcc >= 10:
/nvmedata/autobuild/instance-30/output-1/per-package/fbv/host/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/11.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: gif.o: in function `fh_gif_load':
gif.c:(.text+0x338): undefined reference to `m_rend_gif_decodecolormap'
Fixes:
- http://autobuild.buildroot.org/results/dca603a61b1fd0558992b4a40152d23b5b9c0049
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the kflash Kendryte K210 UART ISP Utility as a host package to allow
users to program their board boot ROM or SRAM with built images.
The kflash utility is available through the pypi.org python package
index. The project is homepage is: https://github.com/vowstar/kflash.py.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will be needed by the upcoming python-kflash package.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
[Thomas: split from a larger patch from Damien Le Moal]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add RISC-V 64-bit nommu defconfig for QEMU virt machine with MMU
disabled.
Unlike qemu_riscv64_virt, qemu_riscv64_nommu_virt does not use OpenSBI,
since the kernel is running in machine mode (M-mode).
After the build is complete, you can start QEMU using the launcher
script:
$ output/images/start-qemu.sh
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the board/riscv/nommu directory to add a Linux kernel patch used
for all RISC-V NOMMU builds (QEMU and Canaan Kendryte K210 SoC based
boards). The patch is upstream and will be part of the upcoming 5.19
release.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch that causes the need for AUTORECONF = YES has been renamed a
while ago, fix the corresponding comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The last version bump of python-werkzeug v2.1.2 introduced a runtime
issue in python-crossbar since escape from werkzeug has been removed
since werkzeug 2.1.0 [1].
This has been fixed in python-crossbar v24.4.1 but we do not want
to bump this package for the Buildroot release 2022.05. Instead
apply the same change as the upstream commit [2] using escape from
python-markupsafe package.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2520606768
[1] 22d1e9ac13
[2] ca8d383f01
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Remove the old elf2flt 0002-elf2flt-add-riscv-64-bits-support.patch
patch file for riscv64 architecture and replace it with 3 patches:
(1) The first patch fixes the data section alignment
(2) The second patch fixes a bug with the handling of the eh_frame
section causing text and data section overlap problems.
(3) The third patch adds a simpler riscv64 flat bin relocation support.
These 3 patches are submitted to the upstream elf2flt project as pull
request #22:
https://github.com/uclinux-dev/elf2flt/pull/22
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It requires a patch to fix a build issue, which has been submitted
upstream.
Signed-off-by: Michael Vetter <jubalh@iodoru.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ktap doesn't build with recent kernels (e.g. 5.10.104-cip3 or 5.15.37)
and is not maintained anymore (latest release in 2013 and latest commit
more than 5 years ago):
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:21:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:30:6: warning: "CONFIG_EVENT_TRACING" is not defined, evaluates to 0 [-Wundef]
30 | #if !CONFIG_EVENT_TRACING
| ^~~~~~~~~~~~~~~~~~~~
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:31:2: error: #error "Please enable CONFIG_EVENT_TRACING before compile ktap"
31 | #error "Please enable CONFIG_EVENT_TRACING before compile ktap"
| ^~~~~
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:21:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c: In function ‘gettimeofday_ns’:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:56:18: error: storage size of ‘now’ isn’t known
56 | struct timespec now;
| ^~~
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:58:2: error: implicit declaration of function ‘getnstimeofday’; did you mean ‘gettimeofday_ns’? [-Werror=implicit-function-declaration]
58 | getnstimeofday(&now);
| ^~~~~~~~~~~~~~
| gettimeofday_ns
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:56:18: warning: unused variable ‘now’ [-Wunused-variable]
56 | struct timespec now;
| ^~~
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:22:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_obj.c: In function ‘kp_obj_kstack2str’:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_obj.c:243:21: error: storage size of ‘trace’ isn’t known
243 | struct stack_trace trace;
| ^~~~~
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_obj.c:253:2: error: implicit declaration of function ‘save_stack_trace’ [-Werror=implicit-function-declaration]
253 | save_stack_trace(&trace);
| ^~~~~~~~~~~~~~~~
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_obj.c:243:21: warning: unused variable ‘trace’ [-Wunused-variable]
243 | struct stack_trace trace;
| ^~~~~
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:27:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_transport.c: In function ‘trace_empty’:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_transport.c:105:39: error: passing argument 1 of ‘ring_buffer_empty_cpu’ from incompatible pointer type [-Werror=incompatible-pointer-types]
105 | if (!ring_buffer_empty_cpu(ktap_iter->buffer, cpu))
| ~~~~~~~~~^~~~~~~~
| |
| struct ring_buffer *
In file included from ./include/linux/trace_events.h:6,
from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/trace_events.h:5,
from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_events.h:4,
from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_str.c:35,
from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:24:
./include/linux/ring_buffer.h:162:49: note: expected ‘struct trace_buffer *’ but argument is of type ‘struct ring_buffer *’
162 | bool ring_buffer_empty_cpu(struct trace_buffer *buffer, int cpu);
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:27:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_transport.c: In function ‘trace_consume’:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_transport.c:116:31: error: passing argument 1 of ‘ring_buffer_consume’ from incompatible pointer type [-Werror=incompatible-pointer-types]
116 | ring_buffer_consume(ktap_iter->buffer, iter->cpu, &iter->ts,
| ~~~~~~~~~^~~~~~~~
| |
| struct ring_buffer *
Fixes:
- http://autobuild.buildroot.org/results/9067192962b4011e0da27ac2b2dc53eb1e31582c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump to version 3.17.0 in
commit ffd45b8726 and
876b1ae719:
/home/giuliobenetti/autobuild/run/instance-2/output-1/build/optee-client-3.17.0/tee-supplicant/src/tee_supplicant.c:104:22: error: 'TEE_PLUGIN_LOAD_PATH' undeclared here (not in a function); did you mean 'TEEC_LOAD_PATH'?
104 | .plugin_load_path = TEE_PLUGIN_LOAD_PATH,
| ^~~~~~~~~~~~~~~~~~~~
| TEEC_LOAD_PATH
Fixes:
- http://autobuild.buildroot.org/results/384e0ca894dbc0ec72cea76141de890f1ce484db
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable -Werror (enabled by default) through DISABLE_WERROR which is
available since version 4.1.0 and
c9c152baba
to avoid the following build failure with gcc 4.8 and libev:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/libwebsockets-4.3.1/lib/event-libs/libev/libev.c: In function 'lws_ev_hrtimer_cb':
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/libwebsockets-4.3.1/lib/event-libs/libev/libev.c:44:3: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing]
ev_timer_set(&ptpr->hrtimer, ((float)us) / 1000000.0, 0);
^
Fixes:
- http://autobuild.buildroot.org/results/75ddbd2e0b058b69a99a2a2f01c62dedad1199c0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the change of the range of UIDs that is generated from the
automatic ID (-1), it became apparent that there is a potential problem
with these automatic IDs when upgrading: they may have changed, which
means that persistent files that exist outside of the rootfs suddenly
have a different owner.
Add a caveat section to the manual, as well as an explanation of how to
work around the problem.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: slight rewording]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Rather than installing just the three blobs mentioned explicitly in the
.mk file, use a wildcard to install all blobs. At the time of this
writing, this matches the following:
-rw-r--r-- 1 arnout arnout 29K Mar 9 13:28 rtw8723d_fw.bin
-rw-r--r-- 1 arnout arnout 136K Mar 9 13:28 rtw8821c_fw.bin
-rw-r--r-- 1 arnout arnout 148K Mar 9 13:28 rtw8822b_fw.bin
-rw-r--r-- 1 arnout arnout 198K Mar 9 13:28 rtw8822c_fw.bin
-rw-r--r-- 1 arnout arnout 142K Mar 9 13:28 rtw8822c_wow_fw.bin
I.e. rtw8821c_fw.bin and rtw8822c_wow_fw.bin were missing.
Although including all blobs nearly doubles the size, it still totals to
just 660K which wouldn't warrant making more refined sub-options.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following musl build failure:
In file included from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/sysroot/usr/include/pthread.h:31,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/armeb-buildroot-linux-musleabi/bits/gthr-default.h:35,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/armeb-buildroot-linux-musleabi/bits/gthr.h:148,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/ext/atomicity.h:35,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/bits/basic_string.h:39,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/string:55,
from Source/Utilities.h:44,
from Source/FreeImage/PluginPSD.cpp:27:
Source/FreeImage/PluginPSD.cpp: In function 'BOOL Save(FreeImageIO*, FIBITMAP*, fi_handle, int, int, void*)':
Source/FreeImage/PluginPSD.cpp:130:10: error: cannot convert 'std::nullptr_t' to 'BOOL' {aka 'int'} in return
130 | return NULL;
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/f9c4ba83a506d374d8a28673aac619d8ff80f3da
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without systemd raised since bump to
version 2022.03 in commit 0eb073ca2b:
src/libostree/ostree-sysroot-deploy.c: In function 'child_setup_fchdir':
src/libostree/ostree-sysroot-deploy.c:2837:19: error: 'uintptr_t' undeclared (first use in this function); did you mean 'intptr_t'?
2837 | int fd = (int) (uintptr_t) data;
| ^~~~~~~~~
| intptr_t
Fixes:
- http://autobuild.buildroot.org/results/c134d849e7942911cb6bd13869dd2f3aefd8c21c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When building on Aarch64 host for powerpc64 we get this error:
gcc: error: unrecognized command-line option '-m64'
This happens because we don't have the flexibility to override the LDFLAGS
when linking nsinstall host tool that is built in libnss. Also libnss uses
the same LDFLAGS it uses for target and that is not correct.
So let's add a patch to add NATIVE_LDFLAGS variable to override LFDFLAGS
when building nsinstall utility and set it to HOST_LDFLAGS in libnss.mk
Fixes:
http://autobuild.buildroot.net/results/67500395f19aa698b98404cde8d20463e55504bf/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add upstream link in patch itself]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some corporate networks may be blocking access to Russian servers.
The server "strace.io" is in Russia, which will make it inaccessible
from some networks.
Use Github instead to download the sources.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
On x86_64, libssl is a dependency for kselftests. selftests/sgx depends on
it. Thus, select it in "Config.in", and add it as a build dependency in
"linux-tool-selftests.mk.in".
Link: https://lore.kernel.org/buildroot/20220517224809.21f77949@gmx.net/
Suggested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>
[yann.morin.1998@free.fr:
- in .mk: change condition to be on package being selected
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Requiring BR2_PACKAGE_GNUPG2 introduced a recursive dependency,
since it appears gcr also supports gnupg we don't need to depend
on !BR2_PACKAGE_GNUPG and can use gnupg if needed.
Fixes:
package/gstreamer1/gstreamer1/Config.in:5:error: recursive dependency detected!
package/gstreamer1/gstreamer1/Config.in:5: symbol BR2_PACKAGE_GSTREAMER1 is selected by BR2_PACKAGE_WEBKITGTK_MULTIMEDIA
package/webkitgtk/Config.in:90: symbol BR2_PACKAGE_WEBKITGTK_MULTIMEDIA depends on BR2_PACKAGE_WEBKITGTK
package/webkitgtk/Config.in:24: symbol BR2_PACKAGE_WEBKITGTK is selected by BR2_PACKAGE_MIDORI
package/midori/Config.in:24: symbol BR2_PACKAGE_MIDORI depends on BR2_PACKAGE_GNUPG
package/gnupg/Config.in:1: symbol BR2_PACKAGE_GNUPG is selected by BR2_PACKAGE_PYTHON_GNUPG
package/python-gnupg/Config.in:1: symbol BR2_PACKAGE_PYTHON_GNUPG depends on BR2_PACKAGE_PYTHON3
package/python3/Config.in:5: symbol BR2_PACKAGE_PYTHON3 is selected by BR2_PACKAGE_JACK2_DBUS
package/jack2/Config.in:35: symbol BR2_PACKAGE_JACK2_DBUS depends on BR2_PACKAGE_JACK2
package/jack2/Config.in:1: symbol BR2_PACKAGE_JACK2 is selected by BR2_PACKAGE_FLUIDSYNTH_JACK2
package/fluidsynth/Config.in:38: symbol BR2_PACKAGE_FLUIDSYNTH_JACK2 depends on BR2_PACKAGE_FLUIDSYNTH
package/fluidsynth/Config.in:1: symbol BR2_PACKAGE_FLUIDSYNTH is selected by BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_FLUIDSYNTH
package/gstreamer1/gst1-plugins-bad/Config.in:438: symbol BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_FLUIDSYNTH depends on BR2_PACKAGE_GSTREAMER1
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
JSON support and the jansson dependency have been removed in version
1.1.2.
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ppc64 or powernv Linux defconfig fail to build with gcc 11 and/or
binutils 2.37 [1] :
CC kernel/kexec_file.o
Cannot find symbol for section 10: .text.unlikely.
kernel/kexec_file.o: failed
Patches have been sent upstream and should reach Linux 5.18. Until
then, limit binutils to 2.36.1 which doesn't raise the issue.
[1] https://github.com/linuxppc/issues/issues/388
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with argp-standalone and NLS raised
since commit 5430c8fedd:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-0/output-1/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libargp.a(argp-parse.o): in function `argp_version_parser':
/home/buildroot/autobuild/instance-0/output-1/build/argp-standalone-1.4.1/argp-parse.c:181: undefined reference to `libintl_dgettext'
[...]
configure: error: libargp not found
Fixes:
- http://autobuild.buildroot.org/results/f7ee27fb4c3253f351deee9867a3b98128f079af
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
In file included from /nvmedata/autobuild/instance-27/output-1/build/i2pd-2.40.0/build/../libi2pd/Signature.h:18,
from /nvmedata/autobuild/instance-27/output-1/build/i2pd-2.40.0/build/../libi2pd/Identity.h:20,
from /nvmedata/autobuild/instance-27/output-1/build/i2pd-2.40.0/build/../libi2pd/Destination.h:21,
from /nvmedata/autobuild/instance-27/output-1/build/i2pd-2.40.0/build/../libi2pd_client/ClientContext.h:16,
from /nvmedata/autobuild/instance-27/output-1/build/i2pd-2.40.0/i18n/I18N.h:12,
from /nvmedata/autobuild/instance-27/output-1/build/i2pd-2.40.0/i18n/Afrikaans.cpp:13:
/nvmedata/autobuild/instance-27/output-1/build/i2pd-2.40.0/build/../libi2pd/Crypto.h: In function 'int DSA_set0_pqg(DSA*, BIGNUM*, BIGNUM*, BIGNUM*)':
/nvmedata/autobuild/instance-27/output-1/build/i2pd-2.40.0/build/../libi2pd/Crypto.h:338:22: error: invalid use of incomplete type 'DSA' {aka 'struct dsa_st'}
338 | if (d->p) BN_free (d->p);
| ^~
Fixes:
- http://autobuild.buildroot.org/results/8da524dda4a548de9b006ae156fdc582b0cffd47
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It appears some grpc reverse dependencies aren't propagated properly.
Fixes:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_GRPC
Depends on [n]: BR2_INSTALL_LIBSTDCPP [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y] && BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS [=y] && BR2_TOOLCHAIN_GCC_AT_LEAST_5 [=y] && !BR2_STATIC_LIBS [=n] && (BR2_TOOLCHAIN_HAS_SYNC_4 [=y] || BR2_TOOLCHAIN_HAS_ATOMIC [=y]) && BR2_PACKAGE_LIBABSEIL_CPP_ARCH_SUPPORTS [=n]
Selected by [y]:
- BR2_PACKAGE_FALCOSECURITY_LIBS [=y] && BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS [=y] && BR2_LINUX_KERNEL [=y] && BR2_INSTALL_LIBSTDCPP [=y] && BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y] && !BR2_STATIC_LIBS [=n] && BR2_TOOLCHAIN_USES_GLIBC [=y] && BR2_PACKAGE_LUAINTERPRETER_ABI_VERSION_5_1 [=y]
On BR2_PACKAGE_COLLECTD_GRPC, we take this opportunity to drop the
Config.in comment about the BR2_HOST_GCC_AT_LEAST_4_9, which was
dropped from BR2_PACKAGE_COLLECTD_GRPC in commit
8251d8c255 ("package/grpc: restrict
host-grpc to the absolute minimum")
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For the new patch, adding block size options (commit 555f8dfd),
Yann E. MORIN requested updated testcases that specifically ensure
the extreme blocksizes (4K and 1024K) don't cause issues.
This patch splits the current test case in 2, testing with both
block sizes and ensuring the block size was applied in the same
fashion as for the specified compression.
Signed-off-by: Linus Kaschulla <linus@cosmos-ink.net>
[yann.morin.1998@free.fr: keep exisitng test with default size]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changes:
- Add printf format attribute hint to all vararg functions. This will
help users of these functions by telling CC what to look for
Fixes:
- Fix fisdir() segfault on GNU/Hurd
- Fix touch() on Debian/kFreeBSD, use creat() instead of mknod()
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to use the separate package for the chromium submodule
which has python3 support patches.
We also need to apply a patch to qt5webengine to allow building with
python3.
Drop a patch which is now upstream.
We need to set QT5WEBENGINE_SYNC_QT_HEADERS = YES as we are building
from a repository archive instead of a release archive.
We need to add some new required dependencies to qt5webengine so that
it will build.
Switch libraries to system libraries instead of bundled when possible.
Migrate unsupported WEBENGINE_CONFIG to new config flag option.
Override feature detection using config override flags to ensure we
get the expected features enabled/disabled as autodetection logic
may otherwise disable features without throwing build errors.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to add a separate package for the chromium submodule so that
we can apply patches for python3 support to it and replace catapult
with a python3 compatible version.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version of catapult is python3 compatible and will be used to
replace the python2 only version in qt5webengine-chromium.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mksquashfs allows to tweak many compressions parameters. Currently they
can't be changed from kmenu. Leaving out potential space savings.
This adds the option to enable a set of predetermined compression
options. This option is enabled by default for lz4 since lz4 currently
implicitly added the extreme to it in the makefile. So this aids in
keeping backward compatibility.
Signed-off-by: Linus Kaschulla <linus@cosmos-ink.net>
[yann.morin.1998@free.fr:
- fix check-package
- change the default code-style, add the legacy comment
- always add the qstriped string, as it's empty when not used
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
One advantage of squashfs over similar technologies is the support for
bigger block sizes. However the default size is not a lot bigger
(typically 128k if no `-b` flag specified).
This patch adds the ability to select from common block sizes
which for example can aid in improving compression ratio.
Signed-off-by: Linus Kaschulla <linus@cosmos-ink.net>
[yann.morin.1998@free.fr:
- drop spurious boolean-based setting in .mk
- split into multi-line
- qstrip variable expansion
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
Generating locale C.UTF-8
[error] LC_MONETARY: value for field `mon_decimal_point' must not be an empty string
[error] no output file produced because errors were issued
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This should be cleaner than editing mkspecs/common/g++-base.conf.
This should be more reliable with qt5webengine gn build system.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: Leave in QMAKE_{CC,CXX} override to ensure HOST{CC,CXX} is used]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
auth_priv.cpp: In member function 'virtual int Snmp_pp::AuthMD5::password_to_key(const unsigned char*, unsigned int, const unsigned char*, unsigned int, unsigned char*, unsigned int*)':
auth_priv.cpp:1132:20: error: aggregate 'Snmp_pp::MD5HashStateType md5_hash_state' has incomplete type and cannot be defined
MD5HashStateType md5_hash_state;
^~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/b50b883c03e82564198a8b7e91bd14bf007772e0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The prompt and variable name for the OCI "entrypoint arguments" are
somewhat incorrect. Indeed, they are in fact used to set the image
"command". Yet, using "command" would be confusing too, because the
interplay between entrypoint and command is tricky [0].
TL-DR; when both entrrypoint and command are set, command acts as
arguments passed to the entrypoint.
Additionally, we currently can only pass a single item as either
entrypoint or command. This precludes passing actual arguments to the
entrypoint, or passing multiple arguments as command.
For example:
BR2_TARGET_ROOTFS_OCI_ENTRYPOINT="/bin/tini -g -p SIGTERM --"
BR2_TARGET_ROOTFS_OCI_ENTRYPOINT_ARGS="/usr/bin/env sh"
generates an images with (only relevant fields are included below):
{
"config": {
"Entrypoint": [ "/bin/tini -g -p SIGTERM --" ],
"Cmd": [ "/usr/bin/env sh" ]
}
}
This is obviously incorrect, and not what one would expect:
{
"config": {
"Entrypoint": [ "/bin/tini", "-g", "-p", "SIGTERM", "--" ],
"Cmd": [ "/usr/bin/env", "sh" ]
}
}
However, some people do want to be able to pass an actual shell
scriptlet as a command, such as:
{
"config": {
"Entrypoint": [ "/bin/sh", "-c" ],
"Cmd": [ "my shell logic goes here" ]
}
}
Handling both is obviously conflicting: we can't both split-on-spaces
and not-split-on-spaces at the same time...
So, we fix that in two ways:
- make the current _OCI_ENTRYPOINT_ARGS a legacy option, and introduce
the new _OCI_CMD option with different semantics (see below) and an
appropriate prompt;
- we interpret both _OCI_ENTRYPOINT and _OCI_CMD as shell strings,
which we subject to the usual shell quoting [1] and token
recognition [2];
Since _OCI_ENTRYPOINT_ARGS used to be interpreted as a single string, we
can't easily change its meaning to be a space-separated list, as that
would break existing setups, which is the reason we make it legacy and
introduce a new option.
Ideally, we would like to default the new option _OCI_CMD to be the
quoted value of the previous _OCI_ENTRYPOINT_ARGS, but this is not
possible in Kconfig. Still, users that had a _OCI_ENTRYPOINT_ARGS set
will now get an early build error, and can still detect they need to do
something about it.
As for _OCI_ENTRYPOINT, it does not make much sense to support both cases.
Indeed, without splitting on spaces, we'd end up with an entrypoint that
would have a single item:
{
"config": {
"entrypoint: [ "some string with some spaces" ]
}
}
which in this case would try to execute the program which name is
actually "some string with some spaces", so we do not expect that
existing entrypoints are set with any space in them, and so the new
behaviour, unlike for _OCI_ENTRYPOINT_ARGS vs. _OCI_CMD, is compatible
with existing configurations, and so we do not need to make it a legacy
option and introduce a new one.
[0] https://docs.docker.com/engine/reference/builder/#understand-how-cmd-and-entrypoint-interact
[1] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_02
[2] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_03
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
duktape can't be used with BR2_OPTIMIZE_FAST resulting in the following
build failure in polkit:
In file included from /nvmedata/autobuild/instance-27/output-1/host/aarch64_be-buildroot-linux-gnu/sysroot/usr/include/duktape.h:202,
from ../src/polkitbackend/polkitbackendduktapeauthority.c:28:
/nvmedata/autobuild/instance-27/output-1/host/aarch64_be-buildroot-linux-gnu/sysroot/usr/include/duk_config.h:2893:2: error: #error __FAST_MATH__ defined, refusing to compile
2893 | #error __FAST_MATH__ defined, refusing to compile
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/587485bcfd85dfd974608aa00b9bd0c42a3a61d8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable tests to avoid the following build failure since bump to version
3.5.2 in commit 8b216927db:
In file included from /nvmedata/autobuild/instance-11/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:71,
from /nvmedata/autobuild/instance-11/output-1/build/libressl-3.5.2/tests/../include/compat/stdio.h:18,
from /nvmedata/autobuild/instance-11/output-1/build/libressl-3.5.2/tests/rfc3779.c:18:
/nvmedata/autobuild/instance-11/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/include/bits/uClibc_stdio.h:149:23: error: expected identifier or '(' before ';' token
149 | void *__unused; /* Placeholder for codeset binding. */
| ^
Fixes:
- http://autobuild.buildroot.org/results/620cb8d542c2e0c263233f5b746cbc9be1bd9547
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A last-minute fixup when applying 5527266559 (package/python-avro:
don't refer to avro-c version variable) improperly duplicated the exact
same comment as in avro-c. Of course, we want to refer to avro-c from
python-avro...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Like for other packages sharing the same version number, we
can't rely on Make variable expansion. It's working by chance
since avro-c is sorted before python-avro by the Buildroot
main Makefile [1].
[1] https://git.buildroot.net/buildroot/tree/Makefile?h=2022.02.1#n533
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Titouan Christophe <titouanchristophe@gmail.com>
[yann.morin.1998@free.fr: duplicate comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream Makefile failed to detect systemd being present in some (maybe all)
builds, resulting in the unit file not being installed. Without the unit file,
the udev rules in usb_modeswitch-data don't work as expected (no modeswitch is
performed).
This commit adds a patch that modifies the Makefile to include
'$(PREFIX)/bin/systemctl' in the list of paths checked, which makes the
installation phase work as intended. I will also submit this patch upstream.
Signed-off-by: Sol Bekic <s+removethis@s-ol.nu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop libubootenv and efibootmgr dependencies which are now
optional runtime dependencies.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libks needs NPTL since its addition in commit
5752d18bfc:
/nvmedata/autobuild/instance-17/output-1/build/libks-1.8.0/src/ks_thread.c: In function 'thread_launch':
/nvmedata/autobuild/instance-17/output-1/build/libks-1.8.0/src/ks_thread.c:237:21: error: 'pthread_setname_np' undeclared (first use in this function); did you mean 'pthread_setcanceltype'?
237 | if (thread->tag && pthread_setname_np)
| ^~~~~~~~~~~~~~~~~~
| pthread_setcanceltype
Fixes:
- http://autobuild.buildroot.org/results/8a93b75ee51e005383eac17aa7577b43eda4cd92
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-24882: FreeRDP is a free implementation of the Remote
Desktop Protocol (RDP). In versions prior to 2.7.0, NT LAN Manager
(NTLM) authentication does not properly abort when someone provides and
empty password value. This issue affects FreeRDP based RDP Server
implementations. RDP clients are not affected. The vulnerability is
patched in FreeRDP 2.7.0. There are currently no known workarounds.
Fix CVE-2022-24883: FreeRDP is a free implementation of the Remote
Desktop Protocol (RDP). Prior to version 2.7.0, server side
authentication against a `SAM` file might be successful for invalid
credentials if the server has configured an invalid `SAM` file path.
FreeRDP based clients are not affected. RDP server implementations using
FreeRDP to authenticate against a `SAM` file are affected. Version 2.7.0
contains a fix for this issue. As a workaround, use custom
authentication via `HashCallback` and/or ensure the `SAM` database path
configured is valid and the application has file handles left.
https://github.com/FreeRDP/FreeRDP/releases/tag/2.7.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
crypto/hash/hmac_ossl.c: In function 'srtp_hmac_alloc':
crypto/hash/hmac_ossl.c:88:55: error: invalid application of 'sizeof' to incomplete type 'HMAC_CTX' {aka 'struct hmac_ctx_st'}
88 | pointer = (uint8_t *)srtp_crypto_alloc(sizeof(HMAC_CTX) +
| ^~~~~~~~
crypto/hash/hmac_ossl.c:97:9: warning: implicit declaration of function 'HMAC_CTX_init'; did you mean 'HMAC_CTX_new'? [-Wimplicit-function-declaration]
97 | HMAC_CTX_init(new_hmac_ctx);
| ^~~~~~~~~~~~~
| HMAC_CTX_new
crypto/hash/hmac_ossl.c: In function 'srtp_hmac_dealloc':
crypto/hash/hmac_ossl.c:130:5: warning: implicit declaration of function 'HMAC_CTX_cleanup' [-Wimplicit-function-declaration]
130 | HMAC_CTX_cleanup(hmac_ctx);
| ^~~~~~~~~~~~~~~~
crypto/hash/hmac_ossl.c:133:40: error: invalid application of 'sizeof' to incomplete type 'HMAC_CTX' {aka 'struct hmac_ctx_st'}
133 | octet_string_set_to_zero(a, sizeof(HMAC_CTX) + sizeof(srtp_auth_t));
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e696ead9ffffa5bb80928d75607bfbb9b263d3c6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While building the kernel tools, libelf header is missing:
output/TestZfsGlibc/build/linux-5.15.35/tools/objtool/include/objtool/elf.h:10:10: fatal error: gelf.h: No such file or directory
10 | #include <gelf.h>
Select BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to build host-libelf.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429014008
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Link with -latomic if needed to avoid the following build failure since
bump to version 1.9.6 in commit b02f13cd54
and
d56ed18dbe:
/nvmedata/autobuild/instance-11/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: pcscd-readerfactory.o: undefined reference to symbol '__atomic_fetch_add_4@@LIBATOMIC_1.0'
Fixes:
- http://autobuild.buildroot.org/results/80b2197a37073976a7dcec7b0f92dba1b26fb3f5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
/nvmedata/autobuild/instance-26/output-1/build/libvncserver-0.9.13/common/crypto_openssl.c: In function 'dh_generate_keypair':
/nvmedata/autobuild/instance-26/output-1/build/libvncserver-0.9.13/common/crypto_openssl.c:149:7: error: dereferencing pointer to incomplete type 'DH' {aka 'struct dh_st'}
149 | dh->p = BN_bin2bn(prime, keylen, NULL);
| ^~
Fixes:
- http://autobuild.buildroot.org/results/49b3940b9d0432cb5fb0c5d22dfa017b18c6e233
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Recent commit f0c7cb01a9 (package/pkg-download: do not try to vendor
_EXTRA_DOWNLOADS) got last-minute changes when applied, which changed
the expected behaviour for packages that do not have a main download.
Before f0c7cb01a9, the dl-wrapper would not even be called for those
packages, and the original patch that was sent also avoided downloading
such packages, but f0c7cb01a9 now causes the dl-wrapper to be called.
It is however an accident that the dl-wrapper does not fail. Indeed, it
is expected to fail if no download was successful; we pass no URI, so
the dl-wrapper should have failed, as it basically does:
download_and_check=0
for uri in "${uris[@]}"; do
...
done
if [ "${download_and_check}" -eq 0 ]; then
exit 1
fi
However, it does not even go that far...
Even though there is no output file, we still pass the path to the
package output directory as the output path. So, to avoid downloading
files already present, the wrapper checks if the output file exists,
and checks its hash:
if [ -e "${output}" ]; then
if support/download/check-hash ${quiet} "${hfile}" "${output}" ...
exit 0
...
fi
The output path does exist now, because we explicitly create it just
before calling the wrapper, because that's where we also locate the
lockfile.
So it ends up trying to validate the hash of a directory, but it fails
to, as there is indeed no hash file for that package. And a missing hash
file is just a warning, not an error, which makes the download actually
a success...
So, this is currently working, and this is by pure luck.
However, there is a potential issue: if a target package is a virtual
package, but the host package is a real package, e.g. the same foo.mk
does (or the other way around):
HOST_FOO_VERSION = 1.2.3
HOST_FOO_SITE = http://example.net/
$(eval $(virtual-package))
$(eval $(host-generic-package))
If there is a hash file to validate the host download, then the current
situation will cause a failure, because there would be a hash file, but
no hash for the output path of the target variant, which would then be
a hard-error.
So, revert to the behaviour from before f0c7cb01a9, where no download
is attempted for a package without a source (really, without a main
download, now).
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enable the supported "riscv64" GOARCH.
Add a patch to fix a build failure due to GOARCH leaking into the calls to the
go-bootstrap compiler. Unsets the GOARCH before calling go-bootstrap.
PR: https://github.com/golang/go/pull/52362
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Scripts which use the buildroot host system to execute a qemu for the compiled
buildroot output can use the symlink at host/bin/qemu-system to execute the
appropriate qemu-system for the target, for example qemu-system-riscv64.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The default defconfig target for the 64 bit powerpc kernel is
ppc64_defconfig, the big endian configuration.
When building for powerpc64le users want the little endian kernel as
they can't boot LE userspace on a BE kernel.
Fix up the defconfig used in this case. This will avoid the following
autobuilder failure:
VDSO32A arch/powerpc/kernel/vdso32/sigtramp.o
cc1: error: ‘-m32’ not supported in this configuratioin
make[4]: *** [arch/powerpc/kernel/vdso32/Makefile:49: arch/powerpc/kernel/vdso32/sigtramp.o] Error 1
http://autobuild.buildroot.net/results/dd76d53bab56470c0b83e296872d7bb90f9e8296/
Note that the failure indicates the toolchain is configured to disable
the 32 bit target, causing the kernel to fail when building the 32 bit
VDSO. This is only a problem on the BE kernel as the LE kernel disables
CONFIG_COMPAT, aka 32 bit userspace support, by default.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we are using ninja with jobserver support we should not pass
-j$(PARALLEL_JOBS) to ninja.
Fixes:
ninja: warning: -jN forced on command line; ignoring GNU make jobserver.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump package revision to pull various fixes for v5.1 - v5.17 kernels.
Patch that disables verbose debug is no more compatible with updated
driver since build flags in Makefile has been changed. Drop it.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop no longer used BR2_PACKAGE_PYTHON_SIX runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop BR2_PACKAGE_PYTHON_CHARACTERISTIC runtime dependency which is no
longer used.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some projects have been removing their setup.py shims under the
assumption that they are not needed due to setuptools being usable
via pep517, however this is not actually the case as it is not
possible to bootstrap setuptools without setup.py style builds as
setuptools has a dependency on wheel when being used via pep517
which is itself not installable via pep517 as that would create a
dependency cycle between wheel and setuptools(which means wheel
itself must use a legacy setup.py build/installation for itself).
In addition our pep517 toolchain itself requires setuptools for
building/installing dependencies, although it would appear these
dependencies will eventually move to flit. Until this is resolved
we must use setup.py style builds for setuptools packages.
Since it is not yet possible to convert setup.py based setuptools
builds to pep517 based setuptools builds we simply need to execute
the setuptools shim code directly if the setup.py file is missing.
See:
https://setuptools.pypa.io/en/latest/setuptools.html#setup-cfg-only-projects
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Set CBOR2_BUILD_C_EXTENSION=1 to ensure c extensions are always built.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
numactl unconditionally uses __atomic_fetch_and resulting in the
following build failure on architectures that need libatomic to provide
atomic intrinsics (e.g. microblaze) since commit
4ed540ddf5:
/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/microblaze-buildroot-linux-uclibc/10.3.0/../../../../microblaze-buildroot-linux-uclibc/bin/ld: ./.libs/libnuma.a(libnuma.o): in function `numa_node_to_cpus_v1':
(.text+0x2a34): undefined reference to `__atomic_fetch_and_1'
Fixes:
- http://autobuild.buildroot.org/results/e225cb83dae390d9dc543d4da85c52180efbd40a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The xradio driver is broken for kernel configurations with disabled
power management core functionality (CONFIG_PM). The xradio package
makefile attempts to enable all the required kernel configuration
options, including CONFIG_PM. However certain architectures have
no support for CONFIG_PM. Those are or1k, nios2, csky, and more.
One possible fix would be to exclude those architectures in the
package Config.in. On the other hand, the xradio driver is rarely
used: orangepi_zero is the only such board in Buildroot. So it
makes sense to keep it simple and enable xradio only for ARM.
Any new xradio users will be considered on a case by case basis.
Fixes:
- http://autobuild.buildroot.net/results/2ad11cd7a9ca6b694854730e46260a944e8c4bac/
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
pkcs11h-openssl.c: In function 'DSA_meth_set1_name':
pkcs11h-openssl.c:239:41: error: invalid use of incomplete typedef 'DSA_METHOD' {aka 'struct dsa_method'}
239 | rv = _pkcs11h_mem_strdup ((void *)&meth->name, name);
| ^~
Fixes:
- http://autobuild.buildroot.org/results/9b0d3bf7d97696c7be6de1724daaba196626b865
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The 5.16.x series is now EOL upstream, so drop the linux-headers option and
add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As reported by [1], the lxc test is broken since lxc >= 4.0.11.
A patch was added to lxc 4.0.11 to use the new mount api for devpts
setup [2] but the fall back code doesn't work when this new mount
API is not supported. This API was added in kernel 5.6.
(kernel 5.5)
DEBUG conf - conf.c:lxc_setup_devpts_child:1682 - No new devpts instance will be
mounted since no pts devices are required
lxc-start lxc_iperf3 DEBUG conf - conf.c:lxc_setup_dev_console:1966 - Cleared
all (0) mounts from "/dev/console"
lxc-start lxc_iperf3 ERROR mount_utils - mount_utils.c:mount_at:661 - No such
file or directory - Failed to mount "/proc/self/fd/44" to "/proc/self/fd/43"
lxc-start lxc_iperf3 ERROR conf - conf.c:lxc_setup_dev_console:1988 - No such
file or directory - Failed to mount "10(/dev/pts/0)" on "43"
lxc-start lxc_iperf3 ERROR conf - conf.c:lxc_setup_console:2143 - No such file
or directory - Failed to setup console
(kernel 5.6)
lxc-start lxc_iperf3 TRACE mount_utils - mount_utils.c:can_use_mount_api:582 -
Kernel supports mount api
lxc-start lxc_iperf3 TRACE mount_utils - mount_utils.c:move_detached_mount:328
- Attach detached mount 45 to filesystem at 43
lxc-start lxc_iperf3 TRACE conf - conf.c:lxc_setup_dev_console:1990 - Setup
console "/dev/pts/0"
Bump the kernel to the current LTS 5.15.38 version that fully support the
mount API needed by lxc.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429013708
[1] http://lists.busybox.net/pipermail/buildroot/2022-January/635251.html
[2] be606e16fd
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch U-Boot from vendor downstream version to upstream. Since the
upstream U-Boot uses binman to build the bootable binary (flash.bin) the
need for the iMX specifc prepare script is no longer required.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: we now have 5.17 headers too]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a dependency to sytemd if enabled so cmake can find libsystemd
and install the systemd service file.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patch that is now fixed upstream. Add a dependency to sytemd if
enabled so cmake can find libsystemd and install the systemd service file.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the very beginning, libunistring was a mandatory dependency of
gnutls. However, it would use its internal copy if libunistring was not
selected. We never want that, so make libunistring an actual mandatory
dependency.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Version 3.7.4 added compression options with brotli, zlib and zstd.
These are automatically discovered, which makes their inclusion depend
on the build order. Therefore, explicitly enable/disable them.
Note that the configure help text says "--without-brotli" and
"--without-zstd", but the options are actually --without-libbrotli and
--without-libzstd. --without-zlib is correct in the help text.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The option is set a few lines below depending on
BR2_PACKAGE_GNUTLS_OPENSSL.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: move it all under a single conditional block]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The pcre/libregex dependency was removed in version 3.7.3 with upstream
commit 26578b7d02c269ff1d34ff782d84c7667734d03d, which removed the
bundled libopts. Remove the pcre dependency and the relevant CONF_OPTS
handling.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gnutls's configure script has a weird approach where it first searches
for dependent libraries in the path specified by --prefix, before
searching in the default search path. Since we set --prefix to /usr,
and it doesn't take into account DESTDIR (which is anyway not set at
configure time), that means it will first search /usr/lib before
searching $(STAGING_DIR)/usr/lib.
Ideally, this would be fixed in the configure script itself. However,
the m4 file that does this is pretty complex, it's not immediately clear
where to add $DESTDIR. In addition it comes from gnulib which is a
somewhat annoying upstream.
Therefore, instead, bypass the prefix lookup with
--without-libfoo-prefix. Note that we could set
--with-libfoo-prefix=$(STAGING_DIR)/usr (the latter is already done for
librt and libpthread), but that's pretty pointless -
--without-libfoo-prefix in fact reverts to what should have been done in
the first place, i.e. use the toolchain search path.
Add --without-libfoo-prefix for all options defined in configure (found
with ./configure --help | grep without-.*-prefix). Most of these are
only used in tests (e.g. libcrypto) or even not at all (e.g. libiconv),
but it's fairly hard to discover this and to be sure that they are
indeed not needed, so better pass all of them.
Remove the now-redundant arguments for librt and libpthread.
Add a comment to remind people to revisit these when bumping the
version.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Not only is ninja much faster, it also avoids the following build
failure:
make[3]: printf: Argument list too long
This failure happens when the output directory is about 6 levels deep.
It's due to the make generator of gyp that uses some crazy shell
processing for splitting up paths on /. The ninja generator does no such
thing.
While we're at it, remove redundant parenthesis in
HOST_NODEJS_CONFIGURE_CMDS.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
One per line, and alphabetical (was already the case for host).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: all host dependencies first]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Includes security fixes to the syscall package, as well as bug fixes to the
compiler, runtime, the go command, and the crypto/x509, go/types,
net/http/httptest, reflect, and sync/atomic packages.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[Peter: mark as security fix]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following uclibc build failure without wchar raised since bump
to version 3.2.0 in commit b054353e59:
configure:5351: checking for /nvmedata/autobuild/instance-0/output-1/host/bin/i586-buildroot-linux-uclibc-gcc option to accept ISO C99
configure:5500: /nvmedata/autobuild/instance-0/output-1/host/bin/i586-buildroot-linux-uclibc-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5
conftest.c:70:9: error: unknown type name 'wchar_t'
70 | const wchar_t *name;
| ^~~~~~~
[...]
configure: error: htop is written in C99. A newer compiler is required.
Fixes:
- http://autobuild.buildroot.org/results/795bb4ae4f1a725c56353915c21fa784ca547c59
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/a6c7dd171529e2a7b7a26af8d99bec53117a7a02/
Commit fd5842a1dd (boot/shim: add
BR2_PACKAGE_SHIM_ARCH_SUPPORTS) added explicit support for big/little endian
arm/aarch64, but the shim code is hard coded for little endian:
head -n 1 elf_{arm,aarch64}_efi.lds
==> elf_arm_efi.lds <==
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
==> elf_aarch64_efi.lds <==
OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
So drop the support for the big endian variants.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
https://sourceware.org/pipermail/libc-alpha/2022-February/136040.html
- Remove upstreamed patch 0001. Patches to localedef are not upstream.
- allow to use optimization CFLAGS (not CPPFLAGS) which are nowadays
supported by upstream (except nios2)
- enable support for or1k, which is now included upstream
- runtime tested with qemu-system for aarch64/arm/microblaze/mips/mips64/nios2/
or1k/powerpc/powerpc64/powerpc64le/riscv32/riscv64/s390x/sh4/sparc64/x86/x86_64
Since only a single version is supported (no csky fork any more), move
the hash file out of the version directory. Also, make a symlink from
the localedef to the glibc hash file rather than copying it.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: make localedef.hash a symlink]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit e15ce8b04d (package/bcusdk: fix build with
argp-standalone and NLS) added a trailing backslash. Drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with argp-standalone and NLS raised
since commit 5430c8fedd:
configure:16428: /home/buildroot/autobuild/instance-3/output-1/host/bin/sh4-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -largp >&5
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sh4-buildroot-linux-uclibc/10.3.0/../../../../sh4-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-3/output-1/host/sh4-buildroot-linux-uclibc/sysroot/usr/lib/libargp.a(argp-parse.o): in function `argp_version_parser':
/home/buildroot/autobuild/instance-3/output-1/build/argp-standalone-1.4.1/argp-parse.c:190: undefined reference to `libintl_dgettext'
[...]
checking for library containing argp_parse... no
configure: error: argp_parse not found
Fixes:
- http://autobuild.buildroot.org/results/9277a064b61f24ad35334b318fe4d899a4c39aa1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5.
This issue leads to a segmentation fault and possibly arbitrary code
execution via a specially crafted filesystem.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add board/zynq, board/zynqmp/kria and the missing defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KV260 starter kit.
KV260 features can be found here:
https://www.xilinx.com/products/boards-and-kits/kv260.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynq_xxx_defconfigs to Xilinx software release 2022.1
which includes the following updates:
- U-Boot bumped to 2022.01
- Linux bumped to 5.15.19
- rootfs changed from CPIO to EXT4
- extlinux.conf for distro boot support
- U-Boot migrated from git clone to tarball for faster builds
This patch has been build and run tested on a ZC706 evaluation board.
This patch has been build tested only for zed, microzed and qmtech boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the DP audio and video PLL configurations for the
zynqmp-zcu106-revA evaluation board.
The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)
Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
This patch was build and run tested on a zynqmp-zcu106-revA target board.
Upstream-Status: submitted (https://lore.kernel.org/all/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com/)
This patch will be removed from buildroot in a future release when no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since SDMA firmwares for imx[6,7,8] are now provided only by
firmware-imx package and not linux-firmware package [1]. If
CONFIG_EXTRA_FIRMWARE is set in the kernel config, the build will fail
if the imx firmware is not available.
[1] http://lists.busybox.net/pipermail/buildroot/2021-January/603807.html
Signed-off-by: Leger Charlie <c.leger@borea-dental.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Recent changes in libusb have exposed a bug in OpenOCD which now crash when trying
to use the ST-Link driver.
Upstream has a fix as commit cff0e417da58adef1ceef9a63a99412c2cc87ff3. This add the commit
as a stand alone patch. The crash also happen on Linux, which was not mentionned in that
commit message.
Should be removed when OpenOCD is updated to a release newer than 0.11
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to the Kitware(cmake maintainer) fork of ninja with make
jobserver support.
This fork has tagged releases based on upstream release tags with
jobserver support added.
It is sad that we need to switch to a fork to get this feature, but
upstream is fighting it over philosophical issues, even though dozens of
people request the feature and a PR for it has existed since 6 years
[1].
[1] https://github.com/ninja-build/ninja/issues/1139
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cpulimit is a tool which limits the CPU usage of a process (expressed in
percentage, not in CPU time). It is useful to control batch jobs, when
you don't want them to eat too many CPU cycles.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[Peter: depend on BR2_USE_MMU, add pull request links to patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following build failure was reported by the autobuilder:
powerpc64 | libgcrypt-1.10.1 | NOK |
http://autobuild.buildroot.net/results/eb60bb95411076b92f5c63f9b21c6e576998031c | ORPH
This config is building with BR2_OPTIMIZE_0=y.
The code relies on the compiler turning the series of preprocessor
macros in to a constant for the second argument to vec_sld:
chacha20-ppc.c:60:10: error: argument 3 must be a 4-bit unsigned literal
60 | return vec_sld (v, v, (16 - (4 * idx)) & 15);
The argument is a constant, but it would require a significant rework to
make this build without optimisation. Instead disable the vectorised
powerpc code when building with optimisation disabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For golang- or cargo-based packages, we apply a vendoring pass after the
package's "main" download is done. Whether to vendor or not is based on
the heuristic that a specific directory exists or not; for golang
packages, we look for '/vendor', while for cargo, we look for '/VENDOR'.
This is fine for the "main" (by lack of a better term) download, but
this falls flat on its face for extra downloads. Indeed, some packages
may need to download data sets, or assets, as _EXTRA_DOWNLOADS. Those
are usually just data blobs, and are not actual golang or cargo packages;
as such they do not need to be vendored, but worse, if we try to
actually vendor them, this fails because the required files for
vendoring are missing from the archives in such data sets.
We fix that by decoupling the download for the extra download, from the
download for the main archive. We pass the post-processing option only
to the main download.
This makes the hard assumption that extra downloads will never need to
be post-processed for vendoring, of course; we hope this will always be
correct in practice. If not, we can fix it later.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout:
- no loop needed for MAIN_DOWNLOAD, it can have only one;
- remove superfluous backslash in the definition of MAIN_DOWNLOAD;
- introduce _ADDITIONAL_DOWNLOADS to avoid filter-out.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This brings in numerous improvements in ipu3 and rpi IPAs as well as
adding support for Black Level Correction, auto gain and auto white
balance algorithms to rkisp IPA. A handful of new camera sensors are
also supported.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This was already disabled for target packages in:
12ba356365
We need to disable wrap downloads for host meson packages as well.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch bumps configs/zynqmp_zcu106_defconfig pmufw to 2022.1.
The pm_cfg_obj.c has not changed between 2021.2 and 2022.1.
The pmufw_v2022.1.bin has been tested on a zcu106 board.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynqmp_zcu102_defconfig pmufw to 2022.1.
The pm_cfg_obj.c has not changed between 2021.2 and 2022.1.
The pmufw_v2022.1.bin has been tested on a zcu102 board.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that the flit-bootstrap SETUP_TYPE is deliberately not
documented as it is used only for bootstrapping the host pep517
toolchain and should not be used anywhere else.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The 4.4.x series is now EOL upstream, so drop the linux-headers option and
add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
- The c_rehash script allows command injection (CVE-2022-1292)
The c_rehash script does not properly sanitise shell metacharacters to
prevent command injection. This script is distributed by some operating
systems in a manner where it is automatically executed. On such operating
systems, an attacker could execute arbitrary commands with the privileges of
the script.
Use of the c_rehash script is considered obsolete and should be replaced by
the OpenSSL rehash command line tool.
https://www.openssl.org/news/secadv/20220503.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If we don't have a DTS name or path we need to also disable cuimage
to disable DTS support as BR2_LINUX_KERNEL_CUIMAGE requires DTS
support.
Fixes:
linux/linux.mk:591: *** No kernel device tree source specified, check your BR2_LINUX_KERNEL_INTREE_DTS_NAME / BR2_LINUX_KERNEL_CUSTOM_DTS_PATH settings. Stop.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch migrates configs/zynqmp_zcu106_defconfig to tarballs for TF-A, u-boot and Linux.
This patch has zero change in code running on the device.
The goal is to improve build speed and align with the zynq_xxx_defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch migrates configs/zynqmp_zcu102_defconfig to tarballs for TF-A, u-boot and Linux.
This patch has zero change in code running on the device.
The goal is to improve build speed and align with the zynq_xxx_defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add TestZfsBase that contains the common parts of the test.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If the kconfig values being replaced are not empty we should not
try to fix them.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We can't enable lua and luajit at the same time as they both provide
the virtual luainterpreter package.
Fixes:
package/luajit/luajit.mk:80: *** Configuration error: both "luajit" and "lua" are selected as providers for virtual package "luainterpreter". Only one provider can be selected at a time. Please fix your configuration. Stop.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Internally genrandconfig will use gettimeofday when generating a
KCONFIG_SEED, since autobuild-run executes genrandconfig at the same
time for multiple autobuilder runners this could potentially result
in the same KCONFIG_SEED being generated for those test runs started
at the same time.
To ensure this doesn't happen set the KCONFIG_SEED using the urandom
entropy source.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently pillow doesn't correctly search pkg-config system paths
for some libraries which can prevent some libraries from being
properly detected/enabled in pillow.
This is due to pillow implementing custom header validation
checks which need system paths present to function correctly:
https://github.com/python-pillow/Pillow/blob/9.0.1/setup.py#L633
Removed custom BUILD_CMDS and INSTALL_TARGET_CMDS which were
causing python-pillow to be installed for the host, they are
not required, we just need to set build_ext at the start
of PYTHON_PILLOW_BUILD_OPTS instead.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
GNU Octave is a high-level language, primarily intended for numerical
computations. It provides a convenient command line interface for
solving linear and nonlinear problems numerically, and for performing
other numerical experiments using a language that is mostly compatible
with Matlab. It may also be used as a batch-oriented language. Octave
has extensive tools for solving common numerical linear algebra
problems, finding the roots of nonlinear equations, integrating
ordinary functions, manipulating polynomials, and integrating ordinary
differential and differential-algebraic equations. It is easily
extensible and customizable via user-defined functions written in
Octave's own language, or using dynamically loaded modules written in
C++, C, Fortran, or other languages.
https://www.octave.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package is moving to flit and distutils will be removed in a future
release. We need to use flit-bootstrap since host-python-pypa-build
depends on host-python-pep517.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Python DevMem is designed primarily for use with accessing
/dev/mem on OMAP platforms. It should work on other platforms
and work to mmap() files rather then just /dev/mem, but these
use cases aren't well tested.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The version is hard-coded in the CMakeList.txt, to 0.1.1dev, and has
not changed in the seven years that line was added. So we override it
with the actual version.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When I wrote the previous commit, I was not fully focused and wrote:
-DDRIVER_NAME=$(FALCOSECURITY_LIBS_DRIVER_NAME.)
Which leaded to DRIVER_NAME to be empty.
So, it was not possible to use sysdig due to the following error message:
error opening device /dev/0. Make sure you have root credentials and that the module is loaded.
Fixes: ea86757e51 ("package/sysdig: bump to 0.29.1")
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps configs/zynqmp_zcu106_defconfig to Xilinx software release 2022.1
which includes the following updates:
- TF-A release version 2.6
- U-Boot release version 2022.01
- Linux kernel release version 5.15.19
It is better to use a Xilinx official release version than sha tags.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynqmp_zcu102_defconfig to Xilinx software release 2022.1
which includes the following updates:
- TF-A release version 2.6
- U-Boot release version 2022.01
- Linux kernel release version 5.15.19
It is better to use a Xilinx official release version than sha tags.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the same format introduced for BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS
in commit 65e05cd914.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gcc toolchain is also released for an aarch64 host target and allow
that configuration to be used as part of the configuration. Tested on
on a aarch64 linux docker.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From the release notes:
(See https://github.com/redis/redis/blob/7.0.0/00-RELEASENOTES)
Introduction to the Redis 7.0 release
=====================================
Redis 7.0 includes several new user-facing features, significant performance
optimizations, and many other improvements. It also includes changes that
potentially break backwards compatibility with older versions. We urge users to
review the release notes carefully before upgrading.
In particular, users should be aware of the following changes:
1. Redis 7 stores AOF as multiple files in a folder; see Multi-Part AOF below.
2. Redis 7 uses a new version 10 format for RDB files, which is incompatible
with older versions.
3. Redis 7 converts ziplist encoded keys to listpacks on the fly when loading
an older RDB format. Conversion applies to loading a file from disk or
replicating from a Redis master and will slightly increase loading time.
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The example applications, which are minimal, can be of great help in
understanding how the library works.
As there is no configure option to enable examples compilation, building
and installation instructions had to be added to libmnl.mk. By default,
which is always the case for buildroot, they are disabled.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Github rockchip-linux doesn't provide libmali repository anymore and the
only up-to-date and maintained repository I've found is JeffyCN/mirrors
branch libmali that provide the identical situtation we were at with
previous repository, so let's switch to JeffyCN repository. This fixes
a build failure while trying to install rockchip-mali.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When BR2_TARGET_OPTEE_OS=y, mkimage_fit_atf.sh is executed with two additional
variables so that the ITS file contains an additional node for the TEE binary.
Then the TEE binary will be packaged into the ITB in addition to TF-A and
U-Boot.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also, only host-python-installer itself needs to be added now.
host-python-flit-core is a dependency of host-python-installer so
doesn't need to be added explicitly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package is moving to flit and will soon be dropping distutils
compatibility support.
We need to use flit-bootstrap as opposed to the normal flit setup
type since host-python-pypa-build depends on host-python-installer.
We need to add the src directory to the PYTHONPATH so that installer
can run from the src directory when installing itself.
We need to explicitly add host-python-flit-core to the dependencies -
only host-python-installer is automatically added to the depenedencies
for flit-bootstrap packages, and this would create a circular dependency
so is explicitly excluded in the infra.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds the option to set systemd's default.target in
the System Configuration subheading if systemd is
specified as the init system.
The argument for default.target is specified pre-build
as opposed to overriding the hardcoded "multi-user.target"
symlink with post-build scripts or a rootfs overlay
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CONFIG_CRYPTO_AEAD2=y.
CONFIG_CRYPTO_AEAD2 and CONFIG_CRYPTO_SKCIPHER2 are needed to fix the
following build failure:
ERROR: modpost: "crypto_alloc_skcipher" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "scatterwalk_map_and_copy" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_ahash_final" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_aead_encrypt" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_aead_setkey" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_skcipher_decrypt" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_destroy_tfm" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_skcipher_setkey" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_aead_decrypt" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_aead_setauthsize" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
However, those options are not user-selectable. They are enabled by the
appropriate consumers of those cyphers. Since cryptodev is anyway meant
to give userspace access to kernel crypto (hardware), it makes sense to
enable CONFIG_CRYPTO. The easiest way to also get AEAD2 and SKCIPHER2 is
to enable CONFIG_CRYPTO_USER_API_AEAD as well.
Fixes:
- http://autobuild.buildroot.org/results/a06708369c233f6e60a1a3ffd7a77a4edd932c9a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When tbb is built in Debug mode, it installs libtbb_debug.so instead of
libtbb.so. This confuses downstream packages that want to link with it
(e.g. sysdig).
Always build in Release mode. This means that BR2_ENABLE_RUNTIME_DEBUG
has no effect for this package, but that shouldn't be a bi issue.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A simple update by bumping the version number and sha256 sum
to the current version.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to remove a patch which needs frequent updates on major version
bumps and to get rid of autoreconf we just add -lz when creating a static
build. This make sure that static linking occurs in the right order.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are many varibles shared via setuptools, distutils and pep517,
combine those common env/opts variables to make them easier to
maintain.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This script gives the address, the offset and the size of binaries have been
stored into U-Boot FIT image that contains TF-A, U-Boot and OP-TEE.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
sysdig 0.27.1 cannot be cross-compiled to, e.g., aarch64 because it uses open()
syscall [1].
This patch bumps its version to enable cross-compilation. Existing
patches have been upstream, but a new patch (merged upstream) has to be
added to avoid downloading json-for-modern-cpp during the build.
[1] https://marc.info/?l=buildroot&m=164951521629400
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a dependency of newer sysdig. It contains the driver, and also a
few userspace components. The latter however are not meant to be
installed in the sysroot; instead, the whole thing is meant to be
included directly in the build of the project using it. Changing things
so it does work in the normal way of installing to the sysroot turns out
to be pretty complicated.
Basically, falcosecurity-libs is just a component of sysdig. It's
defined as a separate package only because that's an easier way to
download it than defining extra download and extract commands in sysdig
itself. For this reason, it's defined as a blind option in Config.in.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The main goal is to use buildroot host-libbpf instead of pahole libbpf
git submodule (which ends up being the same thing anyway). However, this
creates compilation errors due to the use of deprecated APIs (like
btf__get_nr_types). Bump pahole to a commit that is compatible with
current libbpf:
73383b3a39af ("libbpf: Update libbpf to the latest git HEAD")
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This reverts commit 8e91385a2c.
This commit is incorrect, as it is perfectly valid for
BR2_TOOLCHAIN_EXTERNAL_PATH to be empty. The help text of
BR2_TOOLCHAIN_EXTERNAL_PATH even documents it as a supported case:
If empty, the compiler will be searched in $PATH.
Commit 392b0a26f5 ("toolchain-external:
default BR2_TOOLCHAIN_EXTERNAL_PATH to empty") even made that the
default saying "In addition, it in fact works correctly when it is
empty. In that case, the toolchain will be searched in PATH."
A user has reported that commit
8945ba4948 (the backport of 8e91385a2c to
the 2022.02.x LTS branch) breaks his use-case:
https://lore.kernel.org/buildroot/CADBnMvhgaozAgZgy3njckjL1i0U6bZ0fLrq-kdFF-qpGhFWgmw@mail.gmail.com/
Reported-by: Kristof Havasi <havasiefr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: reference 8e91385a2c on master]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that recent versions of binutils work with FLAT binaries, we can
drop the old 2.32 version, which was kept only to keep support FLAT
binaries.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Thanks to the bump of elf2flt to version 2021.08, the issue with
recent versions of binutils has been fixed, so we can re-enable using
the recent binutils versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It contains several fixes and improvements compared to our current
version, and two of our patches have been accepted upstream. Most
notably, it fixes the issue we had in using elf2flt with recent
versions of binutils (upstream commit
ba379d08bb78c9300e84351c11080c26ddcc36b3).
Patch 0001-ld-elf2flt-behave-properly-when-called-with-a-name-d.patch
is upstream as of commit 1c9b454336eaf38f7d037917a3120fae04193fbe
Patch 0002-elf2flt.c-add-new-relocation-types-for-xtensa.patch is
upstream as of commit d7eb73163bcea31168c438fc132a0967ac172e3d
The other two patches are refreshed to apply properly on 2021.08.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The afboot-stm32 build system was initially linking with gcc, but that
was changed upstream following a Buildroot contribution to use ld
instead.
However, the build system was still passing -nostartfiles, which is a
gcc option. By luck, this option was simply ignored by older versions
of ld (such as binutils 2.32), but newer versions of ld (2.36 and
newer, at least) no longer accept/ignore this option.
This commit adds a patch that drops the use of this option, since it
is useless for ld.
The first patch is slightly updated because the upstream pull request
has been updated to contain both build fixes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable builtin harfbuzz which is enabled by default since bump to
version 2.0.18 in commit f4da031a77 and
834ec54127
resulting in the following build failure without threads:
In file included from external/harfbuzz-2.8.0/src/hb.hh:470,
from external/harfbuzz-2.8.0/src/hb-aat-layout.cc:28:
external/harfbuzz-2.8.0/src/hb-mutex.hh:53:10: fatal error: pthread.h: No such file or directory
53 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/ac8b366558bec61ada84ec15cf27652fde2b63b2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2022-1381: global heap buffer overflow in skip_range in GitHub
repository vim/vim prior to 8.2.4763. This vulnerability is capable of
crashing software, Bypass Protection Mechanism, Modify Memory, and
possible remote execution
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I was trying to make the ISC dhcp daemon more secure by using the
-user and -group option to let dhcp server run as non-root user.
Unfortunately these options are not available when building ISC dhcp
server with buildroot.
The reason is, that the configure script must be called with the
option --enable-paranoia to activate these options. But this option
is not set in the dhcp.mk file.
To be backward compatible I added a new option to the dhcp's Config.in
file to enable this feature when desired and parse this option in
dhcp.mk.
Signed-off-by: Andreas Ehmanns <universeiii@gmx.de>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
HPA's tftp server init script does not support include of a
configuration file. So changing daemon parameters would cause
a modification of the init script.
Similar to NFS, dropbear, DHCP, SNMP and other network services
in buildroot, this patch adds an include of /etc/default/tftpd
to the init script. So any user can change the default behaviour
by adding its own configuration file instead of changing the init
script.
Signed-off-by: Andreas Ehmanns <universeiii@gmx.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Moved groups render and sgx from UDEV_USERS to SYSTEMD_USERS as they
currently only appear in systemd's udev rules.
In systemd, group render was introduced since commit 4e15a73, and group
sgx was introduced since commit c9c4899.
In eudev, group render was introduced since commit bb070c1, but was
removed since commit a8ffcd1 [1].
[1]: https://github.com/eudev-project/eudev/issues/160
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Carlos Santos <unixmania@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
On m68k building with optimizations results in failures such as:
/tmp/cckiMnG5.s: Assembler messages:
/tmp/cckiMnG5.s:142572: Error: value -39206 out of range
/tmp/cckiMnG5.s:142629: Error: value -40282 out of range
/tmp/cckiMnG5.s:146408: Error: value -53294 out of range
/tmp/cckiMnG5.s:159014: Error: value -39206 out of range
/tmp/cckiMnG5.s:159071: Error: value -40282 out of range
/tmp/cckiMnG5.s:162850: Error: value -53294 out of range
/tmp/cckiMnG5.s:175456: Error: value -39206 out of range
/tmp/cckiMnG5.s:175513: Error: value -40282 out of range
/tmp/cckiMnG5.s:179292: Error: value -53294 out of range
/tmp/cckiMnG5.s:191898: Error: value -39206 out of range
/tmp/cckiMnG5.s:191955: Error: value -40282 out of range
/tmp/cckiMnG5.s:195734: Error: value -53294 out of range
These only appear when building with -O2, the smaller code generated
with -Os does not cause trouble, so workaround by using that.
Fixes:
http://autobuild.buildroot.net/results/2f222d5a86b4237b81ca31dba89f58b0e6e879db/
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
crypto/hash/hmac_ossl.c: In function 'srtp_hmac_alloc':
crypto/hash/hmac_ossl.c:88:55: error: invalid application of 'sizeof' to incomplete type 'HMAC_CTX' {aka 'struct hmac_ctx_st'}
88 | pointer = (uint8_t *)srtp_crypto_alloc(sizeof(HMAC_CTX) +
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/c346780ed664c9fe8c7112e4c256cfe8080a7af5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Force LibUSB_VERSION_1.0 to ON to fix the following static build failure
with libusb and libatomic:
-- Looking for libusb_get_device_list in /nvmedata/autobuild/instance-4/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libusb-1.0.a
-- Looking for libusb_get_device_list in /nvmedata/autobuild/instance-4/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libusb-1.0.a - not found
[...]
/nvmedata/autobuild/instance-4/output-1/build/openobex-1.7.2/lib/transport/usbobex.h:30:10: fatal error: usb.h: No such file or directory
30 | #include <usb.h>
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/52b0edc4278f65fb4a9671b65c655cc4544a3103
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl raised since bump to
version 3.5.2 in commit 8b216927db:
In file included from bufferevent_openssl.c:68:
bufferevent_openssl.c: In function 'bio_bufferevent_free':
openssl-compat.h:44:28: error: invalid use of incomplete typedef 'BIO' {aka 'struct bio_st'}
44 | #define BIO_get_init(b) (b)->init
| ^~
bufferevent_openssl.c:124:7: note: in expansion of macro 'BIO_get_init'
124 | if (BIO_get_init(b) && BIO_get_data(b))
| ^~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/273f9aa354a08ef3af6140b8dec086408bf5d574
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch allows to use an external toolchain based on gcc 12.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to add gcc 12 support for internal and external toolchain
in follow-up commits, introduce BR2_TOOLCHAIN_GCC_AT_LEAST_12 symbol.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following static build failure:
/nvmedata/autobuild/instance-15/output-1/per-package/ltp-testsuite/host/bin/../lib/gcc/mipsel-buildroot-linux-uclibc/10.3.0/../../../../mipsel-buildroot-linux-uclibc/bin/ld: /nvmedata/autobuild/instance-15/output-1/per-package/ltp-testsuite/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(syslog.os): in function `openlog':
syslog.c:(.text+0x6b8): multiple definition of `openlog'; /tmp/ccvRnqfT.o:/nvmedata/autobuild/instance-15/output-1/build/ltp-testsuite-20220121/testcases/kernel/fs/fs-bench/random-access.c:14: first defined here
Fixes:
- http://autobuild.buildroot.org/results/bfd0d906a05564a4f323db604f3b908abf552b20
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/giuliobenetti/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/giuliobenetti/autobuild/run/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libvcos.so: undefined reference to `backtrace_symbols'
/home/giuliobenetti/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/giuliobenetti/autobuild/run/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libvcos.so: undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/836348270d564a46cc9ee840cf87b2494cc82cec
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop override system locale patch which is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl >= 3.4.1 raised since
commit 25ef2c26da:
In file included from eXtl_dtls.c:82:
/home/autobuild/autobuild/instance-4/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/openssl/ssl.h:1272:6: note: previous declaration of 'SSL_set0_rbio' was here
1272 | void SSL_set0_rbio(SSL *s, BIO *rbio);
| ^~~~~~~~~~~~~
eXtl_dtls.c: In function 'SSL_set0_rbio':
eXtl_dtls.c:108:17: error: invalid use of incomplete typedef 'SSL' {aka 'struct ssl_st'}
108 | BIO_free_all(s->rbio);
| ^~
Fixes:
- http://autobuild.buildroot.org/results/dfafdbf71b31fbda1b5ba491ac35239af4a20aa2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump of argp-standalone to
version 1.4.1 in commit 0fe85041bc and
e7ff8d9787:
/home/autobuild/autobuild/instance-10/output-1/host/lib/gcc/i686-buildroot-linux-musl/10.3.0/../../../../i686-buildroot-linux-musl/bin/ld: tokens/ssh/cryptsetup_ssh-cryptsetup-ssh.o: in function `parse_opt':
cryptsetup-ssh.c:(.text+0x14c): undefined reference to `argp_state_help'
/home/autobuild/autobuild/instance-10/output-1/host/lib/gcc/i686-buildroot-linux-musl/10.3.0/../../../../i686-buildroot-linux-musl/bin/ld: tokens/ssh/cryptsetup_ssh-cryptsetup-ssh.o: in function `main':
cryptsetup-ssh.c:(.text+0x7db): undefined reference to `argp_parse'
Fixes:
- http://autobuild.buildroot.org/results/cb3fdae4e0da603f304501f65127800346cb3915
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Link with -latomic if needed to avoid the following build failure since
bump to version 10.5.0 in commit
b5352c2177 and
c5c1a028cd:
/nvmedata/autobuild/instance-20/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /nvmedata/autobuild/instance-20/output-1/build/qpdf-10.5.0/libqpdf/build/.libs/libqpdf.a(QPDF.o): in function `QPDF::QPDF()':
QPDF.cc:(.text+0x4e44): undefined reference to `__atomic_fetch_add_8'
Fixes:
- http://autobuild.buildroot.org/results/b69e6e380c47bc64c6555899c2f61f57bdae7ecc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package now requires flit and must use the flit-bootstrap setup
type for the host build since it is a dependency of
host-python-pypa-build.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package now requires flit and must use the flit-bootstrap setup
type for the host build since it is a dependency of
host-python-pypa-build.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package needs to use flit-bootstrap since it is a dependency
of host-python-pypa-build. It cannot use the normal install command
because that relies on host-python-installer, and host-python-installer
itself will depend on host-python-flit-core once it is bumped and
migrated to flit-bootstrap setup type. Therefore, use the special
bootstrap_install module.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When installer is used to install packages for host Python, it can figure
out by itself which paths to use. We just need to use the installer CLI
instead of our wrapper script.
Signed-off-by: Роман Донченко <dpb@corrigendum.ru>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are a number of flit toolchain dependencies currently in the
process of deprecating distutils based fallbacks.
This will be needed in order to update tomli.
We need to migrate these to use a new bootstrap based build+install
sequence which relies on flit's bootstrap wheel build+install
features to build and install host-python-pypa-build and
host-python-installer which gives us a full pep517 toolchain.
Note that one can run host-python-flit-core commands for building
and installing itself since the package build directory is the cwd.
We need to add a special flit-bootstrap SETUP_TYPE for dependencies
of host-python-pypa-build and host-python-installer which can not
use the normal flit SETUP_TYPE which would cause a circular dependency
issue.
To avoid further special casing for host-python-flit-core and
host-python-installer, we add two additional changes:
- _BASE_INSTALL_CMD is set with ?=, so it can be overridden by the
package;
- No _DEPENDENCIES are added for host-python-flit-core and
host-python-installer, to avoid circular dependencies. These two are
responsible for their own dependencies.
Although flit-bootstrap _BASE_ variables are almost identical to the
flit/pep517 variables, only _BASE_ENV is really identical. To make
things easier to understand, treat flit-bootstrap as a completely
separate SETUP_TYPE. This also allows us to check that it is only used
for host packages.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: simplify things by delegating some special casing to the
packages themselves; add check that it's only for host.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
rtl_433 21.12 was discovered to contain a stack overflow in the function
acurite_00275rm_decode at /devices/acurite.c. This vulnerability allows
attackers to cause a Denial of Service (DoS) via a crafted file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 1.4.1 in
commit 0fe85041bc and
e5fe9ad9e8:
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-buildroot-linux-uclibc/10.3.0/../../../../mipsel-buildroot-linux-uclibc/bin/ld: libargp.a(argp-parse.o): in function `argp_version_parser':
/home/buildroot/autobuild/instance-2/output-1/build/argp-standalone-1.4.1/argp-parse.c:181: undefined reference to `libintl_dgettext'
Fixes:
- http://autobuild.buildroot.org/results/adb9c4b747352497adbc9df866709b17fe0f9755
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Pass ac_cv_path_xmlconfig to fix the following build failure with
libxml2 raised since bump to version 0.102.0 in commit
007f49962a and
083ca38727:
aarch64-none-linux-gnu-gcc: WARNING: unsafe header/library path used in cross-compilation: '-I/usr/include/libxml2'
In file included from /usr/include/libxml2/libxml/parser.h:810,
from others.c:62:
/usr/include/libxml2/libxml/encoding.h:31:10: fatal error: unicode/ucnv.h: No such file or directory
31 | #include <unicode/ucnv.h>
| ^~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/5bb3bea6d13ac8d497f6862374d65a59bea7ed09
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed 0001-Correct-a-flaw-in-the-Python-3-version-checking.patch
because is already merged.
Select libcurl as required dependency, because keylocation now
supports https. OpenSSL was already a dependency, so libcurl will be
built with https support.
Add upstream patch to support uClibc.
We update the test cases to use the latest LTS kernel, 5.15.x.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
WILC1000/3000 driver pulled from at91-linux tree set-up to be built
as an external module. Upstream Linux kernel does not support
WILC3000 features at this time. This package is intended to bridge
that gap until WILC1000/3000 is fully supported in kernel.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The update to wilc-firmware added firmware files for WILC3000
devices as a separate config option. All Atmel/Microchip defconfigs
that previously only had WILC1000_FIRMWARE either have WILC3000
Wi-Fi hardware (WILC3000 is the same silicon but with BLE added)
or have the capacity to have either WILC1000 or WILC3000 devices
added to the system. Install all firmware blobs to these devices
by default.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Separates out WILC1000 and WILC3000 in to individual config options
since in reality only one or the other set would be needed.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Supports both WILC1000 (Wi-Fi only) and WILC3000 (Wi-Fi/BLE) hardware.
To support WILC3000 this commit adds a separate config option,
the original config option from this package is still valid.
This will be refactored in a follow-up commit.
There is now a license file.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
[Arnout: keep license as PROPRIETARY and add license file hash]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
SVG support needs host gcc >= 4.9 since bump of harfbuzz to version
3.1.2 in commit 6861933d22:
In file included from ../src/hb.hh:473:0,
from ../src/hb-buffer-serialize.cc:27:
../src/hb-vector.hh:206:20: error: 'is_trivially_copy_assignable' is not a member of 'std'
hb_enable_if (std::is_trivially_copy_assignable<T>::value)>
^
Fixes:
- http://autobuild.buildroot.org/results/7b2430c5ae4eed51685ec12bf778c07a0a8b1701
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with gcc 4.8 raised since bump to
version 1.20.0 in commit 3431796927:
../ext/soup/gstsouploader.c: In function 'gst_soup_load_library':
../ext/soup/gstsouploader.c:219:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (guint i = 0; i < len; i++) {
^
Fixes:
- http://autobuild.buildroot.org/results/21792a9839d9722815075569123df8747fc450e3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enable the wlroots' Vulkan renderer if a suitable driver is being built.
Currently only Mesa provides Vulkan drivers, so gating the feature on
BR2_PACKAGE_MESA3D_VULKAN_DRIVER seems reasonable at the moment (and is
done at least by one other package already: pipewire).
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a backported patch from the upstream repository which makes cage
usable with wlroots 0.15.x.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to version 0.15.1, and adapt to upstream changes:
- Adapted from the old -Dfoo-backend Meson option to the new -Dbackends
one, which is an array. The set of always enabled backends matches the
previous selection: drm+libinput always enabled, x11 only if selected.
- Removed the libpng and ffmpeg dependency, which are no longer needed
with examples disabled (which is always the case for Buildroot).
- Changed homepage and download site URLs to the FreeDesktop.org GitLab.
This release changes the API/ABI, and applications which use wlroots
must be adapted and rebuilt. Currently in Buildroot we have only the
cage compositor, to be updated in a follow-up patch.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable duktape with BR2_OPTIMIZE_FAST to fix the following build
failure:
In file included from content/handlers/javascript/duktape/duktape.h:195,
from build/Linux-framebuffer/duktape/application_cache.c:21:
content/handlers/javascript/duktape/duk_config.h:2861:2: error: #error __FAST_MATH__ defined, refusing to compile
2861 | #error __FAST_MATH__ defined, refusing to compile
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/2f1b42e2be3aa76cbacd84f3d0ad8b13edce6982
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump of harfbuzz to version
3.1.2 in commit 6861933d22:
In file included from ../src/hb.hh:473:0,
from ../src/hb-buffer-verify.cc:27:
../src/hb-vector.hh:206:20: error: 'is_trivially_copy_assignable' is not a member of 'std'
hb_enable_if (std::is_trivially_copy_assignable<T>::value)>
^
Fixes:
- http://autobuild.buildroot.org/results/bbc48cb5232c617d4ff1d0bafd63bb3c9c72d556
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The link to at91.com is outdated and redirects to linux4sam.org
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The following build failure is raised since commit
1745fcde74 because
$(HOST_PKG_PYTHON_DISTUTILS_ENV) contains $(HOST_CONFIGURE_OPTS) and so
will override LDFLAGS passed by libselinux.mk:
/usr/bin/gcc -O2 -I/nvmedata/autobuild/instance-11/output-1/host/include -I../include -D_GNU_SOURCE -DNO_ANDROID_BACKEND -L/nvmedata/autobuild/instance-11/output-1/host/lib -Wl,-rpath,/nvmedata/autobuild/instance-11/output-1/host/lib -shared -o libselinux.so.1 avc.lo avc_internal.lo avc_sidtab.lo booleans.lo callbacks.lo canonicalize_context.lo checkAccess.lo check_context.lo checkreqprot.lo compute_av.lo compute_create.lo compute_member.lo compute_relabel.lo compute_user.lo context.lo deny_unknown.lo disable.lo enabled.lo fgetfilecon.lo freecon.lo freeconary.lo fsetfilecon.lo get_context_list.lo get_default_type.lo get_initial_context.lo getenforce.lo getfilecon.lo getpeercon.lo init.lo is_customizable_type.lo label.lo label_db.lo label_file.lo label_media.lo label_support.lo label_x.lo lgetfilecon.lo load_policy.lo lsetfilecon.lo mapping.lo matchmediacon.lo matchpathcon.lo policyvers.lo procattr.lo query_user_context.lo regex.lo reject_unknown.lo selinux_check_securetty_context.l
o selinux_config.lo selinux_restorecon.lo sestatus.lo setenforce.lo setexecfilecon.lo setfilecon.lo setrans_client.lo seusers.lo sha1.lo stringrep.lo validatetrans.lo -ldl -Wl,-soname,libselinux.so.1,--version-script=libselinux.map,-z,defs,-z,relro
/usr/bin/ld: regex.lo: in function `regex_writef':
regex.c:(.text+0x7c): undefined reference to `pcre_fullinfo'
To fix this build failure, instead of moving LDFLAGS after
$(HOST_PKG_PYTHON_DISTUTILS_ENV), drop LDFLAGS and add host-pkgconf
dependency to retrieve pcre dependencies as pkg-config is supported
since version 3.2 and
74093beab0
Dropping LDFLAGS will also drop -lpthread which doesn't seem to raise
any build failures with test-pkg:
bootlin-armv5-uclibc [1/6]: OK
bootlin-armv7-glibc [2/6]: OK
bootlin-armv7m-uclibc [3/6]: SKIPPED
bootlin-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: SKIPPED
sourcery-arm [6/6]: SKIPPED
Apply the same update to the target variant for consistency.
Fixes:
- http://autobuild.buildroot.org/results/d16995f0decef9c9bf58cab4fa30f7daab6918fb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
pamtester uses an archaic configure.in with archaic constructs. This
had generated a configure script that incorrectly tries to look for and
validate a C++ compiler:
checking for powerpc64le-buildroot-linux-gnu-g++... no
checking whether we are using the GNU C++ compiler... no
checking whether no accepts -g... no
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
Callin gautoreconf fixes the issue, as the generated configure no longer
trie to look for a C++ compiler at all anymore.
Fixes:
- http://autobuild.buildroot.org/results/c000aff659da024b6eef42bca824bdea7b5541c2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: expand commit log; add big-fat comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
So far, all ARM cores were selecting BR2_ARCH_HAS_MMU_OPTIONAL, except
no-MMU cores which were selecting nothing.
In practice, MMU-capable ARM cores are always used with their MMU
enabled, so it doesn't make sense to support the use case of not using
the MMU on such cores.
Consequently, to simplify things, we group the MMU handling in the
BR2_ARM_CPU_ARM* options: BR2_ARM_CPU_ARMV4, BR2_ARM_CPU_ARMV5,
BR2_ARM_CPU_ARMV6, BR2_ARM_CPU_ARMV7A, BR2_ARM_CPU_ARMV8A all select
BR2_ARCH_HAS_MMU_MANDATORY, while BR2_ARM_CPU_ARMV7M continues to
select nothing, indicating that there is no MMU available at all.
Fixes:
http://autobuild.buildroot.net/results/33277d4687ca9a04dbfb02c50e5755ff9e55b0b4/ (FLAT
selected on AArch64)
http://autobuild.buildroot.net/results/5e34d11393e14fc36fd6e72b69679bc4fd1e3798/ (FLAT
selected on AArch64 big-endian)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Selecting BR2_ARCH_HAS_MMU_MANDATORY from BR2_aarch64 and
BR2_aarch64_be doesn't make much sense, because the actual ARM cores
described in arch/Config.in.arm then all select
BR2_ARCH_HAS_MMU_OPTIONAL. So we end up with both
BR2_ARCH_HAS_MMU_OPTIONAL and BR2_ARCH_HAS_MMU_MANDATORY, which
doesn't make any sense.
To prevent this, we remove the selection of BR2_ARCH_HAS_MMU_MANDATORY
from BR2_aarch64 and BR2_aarch64_be, and let arch/Config.in.arm do its
job. What arch/Config.in.arm does is currently incorrect, but it will
be fixed in a separate commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that all SuperH cores have an MMU, and must use it, move back the
select BR2_ARCH_HAS_MMU_MANDATORY one level up.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Until commit "arch/Config.in.sh: fixup MMU selection" in this series,
SH2A could either be used with BR2_USE_MMU disabled or BR2_USE_MMU
enabled.
The later made absolutely no sense, since SH2A does not have a MMU:
MMU support was introduced starting from SH3 according to
https://en.wikipedia.org/wiki/SuperH#SH-3
Also, since commit 22d5501e03 ("arch:
tidy up binary formats config"), which was merged in Buildroot
2015.05, the architecture tuple used when BR2_sh2a=y and BR2_USE_MMU
disabled is sh2a-buildroot-uclinux-uclibc, and this was already
unsupported back in the days of Buildroot 2015.08 and binutils 2.24,
causing the build to fail with:
*** BFD does not support target sh2a-buildroot-uclinux-uclibc.
just like it fails to build today with recent version of binutils.
So, this has been broken since 2015.08, and nobody complained. SH2A is
seldom used, so it's time to kill it.
It is worth mentioning that there had been an attempt at resurrecting
SH2 support around 2015 (see https://lwn.net/Articles/647636/) as part
of the J2 core. This effort led to the addition of FDPIC support for
SH2A in the musl C library (and therefore proper ELF binaries, with
shared libraries), but that was never supported in Buildroot. Now that
the J2 project is essentially dead, there is no reason to bother with
this.
Fixes:
http://autobuild.buildroot.net/results/63d01d33ae30f86b63b9f42a9fea116f2f3e9005/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with BR2_OPTIMIZE_0 raised since the
addition of the package in commit
efc10eb6b8 and
https://git.netfilter.org/arptables/commit/?id=369afc14de1d89ff5627ff4c5f72f6f839244b50:
libarptc/libarptc.c:48:21: error: redefinition of 'arpt_get_target'
48 | #define GET_TARGET arpt_get_target
| ^~~~~~~~~~~~~~~
libarptc/libarptc_incl.c:16:1: note: in expansion of macro 'GET_TARGET'
16 | GET_TARGET(STRUCT_ENTRY *e)
| ^~~~~~~~~~
In file included from .//include/libarptc/libarptc.h:7,
from libarptc/libarptc.c:26:
.//include/linux/netfilter_arp/arp_tables.h:196:43: note: previous definition of 'arpt_get_target' was here
196 | static __inline__ struct xt_entry_target *arpt_get_target(struct arpt_entry *e)
| ^~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/730dce4101e7afcee233067e2870603cd64b8a48
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Switch site to an up-to-date fork
- Drop first and second patches (not needed since:
c474ac2af78069113599
- Drop third patch (not needed since:
e7ff8d9787)
- License is LGPL-2.1+ since
c474ac2af7
- README.md can be used as the license file since
da0206414d
- This bump will also fix the following build failure with
BR2_OPTIMIZE_0 thanks to
e7ff8d9787:
/nvmedata/autobuild/instance-27/output-1/host/lib/gcc/microblaze-buildroot-linux-uclibc/10.3.0/../../../../microblaze-buildroot-linux-uclibc/bin/ld: libargp.a(argp-help.o): in function `indent_to':
/nvmedata/autobuild/instance-27/output-1/build/argp-standalone-1.3/argp-help.c:930: undefined reference to `argp_fmtstream_point'
Fixes:
- http://autobuild.buildroot.org/results/8e2cd69356f40bae534847ad58f4aa0dabb4c791
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with BR2_OPTIMIZE_0:
/home/autobuild/autobuild/instance-11/output-1/host/lib/gcc/mips64-buildroot-linux-uclibc/10.3.0/../../../../mips64-buildroot-linux-uclibc/bin/ld: vde_l3.o: in function `ip_output_ready':
vde_l3.c:(.text+0xb30): undefined reference to `iphead'
Fixes:
- http://autobuild.buildroot.org/results/5eeefcdac0b8974a424a885fdc2e82f7cb4b617d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add upstream patch to disable -Werror and fix the following build
failure with gcc 4.8 raised since bump to version 1.4 in commit
c2e32e6558 and
https://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git/commit/?id=cf8be8a4352a5df3b3acf545af289cb47faa6de0:
In file included from /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/string.h:636:0,
from ../include/erofs/internal.h:242,
from ../include/erofs/inode.h:11,
from main.c:12:
In function 'memset',
inlined from 'erofsdump_filetype_distribution.constprop.2' at main.c:583:9:
/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/bits/string3.h:81:30: error: call to '__warn_memset_zero_len' declared with attribute warning: memset used with constant zero length parameter; this could be due to transposed parameters [-Werror]
__warn_memset_zero_len ();
^
Fixes:
- http://autobuild.buildroot.org/results/4c776ec935bbb016231b6701471887a7c9ea79e9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix a bug where the init subdir was accidentially removed from meson.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some of wtfutils modules (i.e. plugins) can call to external tools, so
it needs to fork(), so needs an MMU.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add BR2_PACKAGE_OPENCV4_LIB_DNN to fix the following uclibc build
failure raised since bump to version 4.5.5 in commit
b692231393 and
1feb3838b5:
/home/giuliobenetti/autobuild/run/instance-3/output-1/build/opencv4-4.5.5/modules/dnn/src/layers/elementwise_layers.cpp: In member function 'float cv::dnn::RoundFunctor::calculate(float) const':
/home/giuliobenetti/autobuild/run/instance-3/output-1/build/opencv4-4.5.5/modules/dnn/src/layers/elementwise_layers.cpp:1260:43: error: 'fegetround' is not a member of 'std'
1260 | int old_rounding_direction = std::fegetround();
| ^~~~~~~~~~
/home/peko/autobuild/instance-0/output-1/build/opencv4-4.5.5/modules/dnn/src/layers/elementwise_layers.cpp:1261:14: error: 'fesetround' is not a member of 'std'
1261 | std::fesetround(FE_TONEAREST);
| ^~~~~~~~~~
/home/peko/autobuild/instance-0/output-1/build/opencv4-4.5.5/modules/dnn/src/layers/elementwise_layers.cpp:1261:25: error: 'FE_TONEAREST' was not declared in this scope
1261 | std::fesetround(FE_TONEAREST);
| ^~~~~~~~~~~~
Indeed, uclibc pretends to implement fenv but it raises build failures
on numerous architectures (or1k, sh4, xtensa, mipsel, arm, arc, riscv64,
etc.)
Fixes:
- http://autobuild.buildroot.org/results/a6dd3c10acfbf6bc1af867d770cf0ce926c6ce84
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure on nios2 raised since bump to version
2021.5.0 in commit 3c66ac07a0:
In file included from /home/giuliobenetti/autobuild/run/instance-2/output-1/build/tbb-2021.5.0/src/tbb/tools_api/ittnotify_static.c:17,
from /home/giuliobenetti/autobuild/run/instance-2/output-1/build/tbb-2021.5.0/src/tbb/itt_notify.cpp:43:
/home/giuliobenetti/autobuild/run/instance-2/output-1/build/tbb-2021.5.0/src/tbb/tools_api/ittnotify_config.h: In function 'long int __itt_interlocked_increment(volatile long int*)':
/home/giuliobenetti/autobuild/run/instance-2/output-1/build/tbb-2021.5.0/src/tbb/tools_api/ittnotify_config.h:348:12: error: '__TBB_machine_fetchadd4' was not declared in this scope
348 | return __TBB_machine_fetchadd4(ptr, 1) + 1L;
| ^~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/2b55d1d171f21030be8312f984ea02ec8c8348a8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes compatibility with GCC-11.
Doesn't require any local patches (all applied upstream or no longer
required).
LICENSE adds three new licenses:
- MIT for code copied from libunwind;
- Apple Public Source License for Mac-specific code;
- BSD-4-Clause also for Mac-specific code.
Since the latter two are Mac-specific, we don't mention them in
_LICENSE.
linux-syscall-support bumped to the verion in DEPS. It now has a license
file so use that instead of the header file.
Signed-off-by: Nuno Gonçalves <nunojpg@gmail.com>
[Arnout: update licenses, license files and hashes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop boost tagged layout which raises the following build failure with
botan or libcpprestsdk:
/nvmedata/autobuild/instance-31/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/11.2.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -lboost_system
CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:230 (message):
Could NOT find Boost (missing: random system thread filesystem chrono
atomic date_time regex) (found version "1.78.0")
While at it:
- drop BR2_PACKAGE_BOOST_LAYOUT and BR2_PACKAGE_BOOST_LAYOUT_SYSTEM
- move --layout=system, --ignore-site-config,
--user-config=$(@D)/user-config.jam, -j$(PARALLEL_JOBS), -q and
--prefix=$(HOST_DIR) to BOOST_OPTS and HOST_BOOST_OPTS
- drop parentheses to avoid spawning a useless sub-shell
- use b2 everywhere instead of mixing b2 and
tools/build/src/engine/bjam
- drop uneeded 'echo "" >> $(@D)/user-config.jam'
BR2_PACKAGE_BOOST_LAYOUT_SYSTEM is not added to Config.in.legacy since
nothing changes for configs which already had it selected.
Fixes:
- http://autobuild.buildroot.org/results/f237c9345faf8c28f3c73f7d8acb49271fe61780
- http://autobuild.buildroot.org/results/a73225e40fa29bc3b24f36a86719e80c8e469d1f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: don't add BR2_PACKAGE_BOOST_LAYOUT_SYSTEM to Config.in.legacy]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add dynamic library dependency to BR2_PACKAGE_WOLFSSL_ALL to fix the
following static build failure with ibrdtnd, a "wolfssl all"-enabled
libcurl and openssl:
/nvmedata/autobuild/instance-5/output-1/per-package/ibrdtnd/host/opt/ext-toolchain/bin/../lib/gcc/sh4aeb-buildroot-linux-musl/11.2.0/../../../../sh4aeb-buildroot-linux-musl/bin/ld: /nvmedata/autobuild/instance-5/output-1/per-package/ibrdtnd/host/bin/../sh4aeb-buildroot-linux-musl/sysroot/usr/lib/libssl.a(ssl_ciph.o): in function `SSL_COMP_get_compression_methods':
ssl_ciph.c:(.text+0x25ac): multiple definition of `SSL_COMP_get_compression_methods'; /nvmedata/autobuild/instance-5/output-1/per-package/ibrdtnd/host/sh4aeb-buildroot-linux-musl/sysroot/usr/lib/libwolfssl.a(libwolfssl_la-ssl.o):ssl.c:(.text+0x1ca60): first defined here
Fixes:
- http://autobuild.buildroot.org/results/be1d327ed4c91a6280a88906a399dfe146f0b64e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
diff COPYRIGHT:
-Copyright (C) 2005-2021 Mike Pall. All rights reserved.
+Copyright (C) 2005-2022 Mike Pall. All rights reserved.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Text has been added to README.md, but the section about licenses hasn't
been modified. Unfortunately there are still many files without license
info, so the small piece of text in README.md that says files with no
license info are LGPL-2.0 is still relevant.
Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
[Arnout: update README.md hash]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop host-pkgconf dependency which has been wrongly added by commit
732d94d25f. Indeed, expat doesn't use
pkgconf to retrieve dependencies
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable examples and tests (enabled by default) through
--without-{examples,tests} which are available since version 2.2.7 and
1fdfd8a1b4
Also disable xmlwf (a binary that determines if an XML document is
well-formed) through --without-xmlwf which is available since version
2.2.4 and
9d950527a0
This will fix the following build failure on riscv64:
ERROR: reloc type R_RISCV_SET6 unsupported in this context
Fixes:
- http://autobuild.buildroot.org/results/99890c9c7ebe3266dd533c81352a3cbcf4d3d738
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure on musl:
In file included from /nvmedata/autobuild/instance-17/output-1/host/powerpc64-buildroot-linux-musl/sysroot/usr/include/asm/ioctl.h:12,
from /nvmedata/autobuild/instance-17/output-1/host/powerpc64-buildroot-linux-musl/sysroot/usr/include/linux/ioctl.h:5,
from /nvmedata/autobuild/instance-17/output-1/host/powerpc64-buildroot-linux-musl/sysroot/usr/include/linux/fs.h:14,
from ioctls/vfs.c:3:
ioctls/vfs.c:109:35: error: 'loff_t' undeclared here (not in a function); did you mean 'off_t'?
109 | { .name = "FIOQSIZE", .request = FIOQSIZE, },
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/b7f46072751a8d70fa02f1c625c5279f70bec853
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl:
CMake Error: TRY_RUN() invoked in cross-compiling mode, please set the following cache variables appropriately:
LIBRESSL_RESULT (advanced)
LIBRESSL_RESULT__TRYRUN_OUTPUT (advanced)
For details see /nvmedata/autobuild/instance-27/output-1/build/mariadb-10.3.34/TryRunResults.cmake
Fixes:
- http://autobuild.buildroot.org/results/cbdbfcdae4b89ac678e1bf6bcded96872c7223ab
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with gcc 4.8 raised since bump to
version 1.20.0 in commit f94ba5c31c and
80164ef300:
../src/wayland-util.c: In function 'for_each_helper':
../src/wayland-util.c:373:2: error: 'for' loop initial declarations are only allowed in C99 mode
for (size_t idx = 0; idx < count; idx++) {
^
../src/wayland-util.c:373:2: note: use option -std=c99 or -std=gnu99 to compile your code
Fixes:
- http://autobuild.buildroot.org/results/3040c9a8cf08415a7f4338185f6dc7245c68c64c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-pybind needs C++ since its addition in commit
f42f2a63b3:
-- Check for working CXX compiler: /usr/bin/c++ - broken
CMake Error at /nvmedata/autobuild/instance-24/output-1/host/share/cmake-3.18/Modules/CMakeTestCXXCompiler.cmake:59 (message):
The C++ compiler
"/usr/bin/c++"
is not able to compile a simple test program.
Fixes:
- http://autobuild.buildroot.org/results/90364b752bef3f7b4b1fd9181e21030349e0e529
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl:
/nvmedata/autobuild/instance-9/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/10.3.0/../../../../s390x-buildroot-linux-gnu/bin/ld: check/libcheck.a(check_ssl.o): in function `ssl_connect':
check_ssl.c:(.text+0x7da): undefined reference to `SSL_set0_wbio'
Fixes:
- http://autobuild.buildroot.org/results/76f72a3c7350ea265e2277c89d68e5256410e94c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Support for the Twofish algorithm is removed upstream.
The dh_group1 algorithm is now disabled by default. Enable only when
BR2_PACKAGE_DROPBEAR_LEGACY_CRYPTO is enabled.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 1.2 in
commit 242227dd86:
powerpc-buildroot-linux-gnu-gcc: WARNING: unsafe header/library path used in cross-compilation: '-I/usr/include'
In file included from src/aircrack-ng/aircrack-ng.c:54:
/usr/include/math.h:476:21: error: '_Float128' is not supported on this target
476 | # define _Mdouble_ _Float128
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/83a114ce197fb6af53a26ed68184cf3bbb30c8a7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The latest Go release, version 1.18, is a significant release, including changes
to the language, implementation of the toolchain, runtime, and libraries.
https://go.dev/doc/go1.18
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Like was done in 700674b45c (package/bind: disable backtrace support)
for the up-to-date, official, upstream bind, also disable backtrace on
dhcp's internal bind to avoid the following build failure since commit
0c8dd6ebd6 (package/dhcp: use internal bind):
/nvmedata/autobuild/instance-15/output-1/host/lib/gcc/armeb-buildroot-linux-uclibcgnueabi/10.3.0/../../../../armeb-buildroot-linux-uclibcgnueabi/bin/ld: /nvmedata/autobuild/instance-15/output-1/build/dhcp-4.4.3/bind/bind-9.11.36/lib/isc/.libs/libisc.so: undefined reference to `_Unwind_GetIP'
Fixes:
- http://autobuild.buildroot.org/results/074786f3f1e7ffc858dcb1de1855ee138793869e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without threads raised since bump to
version 4.3.1 in commit 3a9cf51ab3 and
8eca7e17f2:
In file included from /nvmedata/autobuild/instance-1/output-1/build/libwebsockets-4.3.1/lib/plat/unix/unix-caps.c:28:
/nvmedata/autobuild/instance-1/output-1/build/libwebsockets-4.3.1/lib/core/./private-lib-core.h:68:11: fatal error: pthread.h: No such file or directory
68 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/5d011b65e530339eb3f4d06a08caabc6a73b403b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without C++ raised since the addition of
the package in commit ba0d78b907:
The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-0/output-1/host/bin/i686-buildroot-linux-gnu-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-0/output-1/host/bin/i686-buildroot-linux-gnu-g++'"
Fixes:
- http://autobuild.buildroot.org/results/eebf65036f79d21d347714d62afecd0108393308
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without C++ raised since bump to version
4.3.1 in commit 3a9cf51ab3 and
962e9ee345:
CMake Error at /nvmedata/autobuild/instance-11/output-1/per-package/libwebsockets/host/share/cmake-3.18/Modules/CMakeTestCXXCompiler.cmake:59 (message):
The C++ compiler
"/usr/bin/clang++"
is not able to compile a simple test program.
Fixes:
- http://autobuild.buildroot.org/results/550e7f7d54adf74f8cc078be5b91b3567d622ede
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Replace first patch (which is not in master after nearly 4 years) with
a new set of pending patches to fix the following build failure with
gcc >= 7:
liboping.c: In function 'ping_set_ttl':
liboping.c:207:9: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 242 [-Werror=format-truncation=]
207 | "%s: %s", function, message);
| ^~
......
829 | sstrerror (ret, errbuf, sizeof (errbuf)));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
liboping.c:206:2: note: 'snprintf' output between 15 and 270 bytes into a destination of size 256
206 | snprintf (obj->errmsg, sizeof (obj->errmsg),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
207 | "%s: %s", function, message);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/31083354e9064b2deef86917d67e92a88af0fa46
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Link to Rust 1.60.0: https://blog.rust-lang.org/2022/04/07/Rust-1.60.0.html
Packages relying on Rust have been updated to support version 1.60.0:
package/rust
package/rust-bin
Newest version of the source archives have been retrieved with their hash values, and the signature of the .asc files have been verified as follows:
$ curl -fsSL https://static.rust-lang.org/rust-key.gpg.ascii | gpg --import
$ gpg --verify <filename.asc> <filename>
The signatures were recognized but the ownership from https://static.rust-lang.org could not be verified. Because this URL can be trusted, it has been considered to blindly sign the corresponding key:
$ gpg --lsign-key 85AB96E6FA1BE5FE
There is no typographical error in the packages according to the check-pakage utility:
$ ./utils/check-package package/rust-bin/*
$ ./utils/check-package package/rust/*
The testsuites for the rust-bin and rust packages to test the Rust toolchain under 1.60.0 were successful:
$ ./support/testing/run-tests -k -d dl/ -o testsuite tests.package.test_rust.TestRustBin
$ ./support/testing/run-tests -k -d dl/ -o testsuite tests.package.test_rust.TestRust
In order to verify the compatibility of Rust 1.60.0 with packages relying on it, tests using `./utils/test-pkg` were run.
For example, running the following command with `.conf` file enabling the corresponding BR2_PACKAGE:
$ ./utils/test-pkg -d test-pkg -c ripgrep.config -p ripgrep
Results:
package/ripgrep: OK
package/librsvg : OK
package/suricata: OK
package/bat: OK
Notes:
- For all the mentionned packages, the successful build was made on the toolchain bootlin-armv7-glibc (except package/bat, for which it was bootlin-x86-64-musl).
- A redundant build fail was witnessed for the bootlin-x86-64-musl toolchain for all the packages tested (except for package/bat). The same tests were redone in the master branch and it was already the case with Rust 1.58.1.
Signed-off-by: Nicolas Tran <nicolas.tran@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libbpf needs __sync_*_4 intrisics since bump to version 0.7.0 in commit
4b1003855b and
b0c3d7133f
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
bpftool needs __sync_*_4 intrisics since its addition in commit
3675131e6c and
b0c3d7133f:
/nvmedata/autobuild/instance-26/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /nvmedata/autobuild/instance-26/output-1/build/bpftool-v6.7.0/src/libbpf/libbpf.a(libbpf.o): in function `bpf_program__attach_kprobe_opts':
libbpf.c:(.text+0xff88): undefined reference to `__sync_fetch_and_add_4'
Fixes:
- http://autobuild.buildroot.org/results/919b8351d3783ca30a860df87ae814d5c4b9fd41
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with libressl >= 2.8.0 raised since
703abab321:
/nvmedata/autobuild/instance-20/output-1/build/azure-iot-sdk-c-LTS_01_2022_Ref01/c-utility/adapters/tlsio_openssl.c: In function 'add_certificate_to_store':
/nvmedata/autobuild/instance-20/output-1/build/azure-iot-sdk-c-LTS_01_2022_Ref01/c-utility/adapters/tlsio_openssl.c:961:24: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
961 | bio_method = BIO_s_mem();
| ^
cc1: all warnings being treated as errors
Fixes:
- http://autobuild.buildroot.org/results/873f86fb2311ed29a791140f2341943475985fcc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is an host-only package that does preprocessing to .rl files to
turn them into .c or .cpp files.
Initially added to support package/roc.
See https://www.colm.net/open-source/ragel/ for the project's home page:
Ragel compiles executable finite state machines from regular languages.
Ragel targets C, C++ and ASM. Ragel state machines can not only
recognize byte sequences as regular expression machines do, but can
also execute code at arbitrary points in the recognition of a regular
language. Code embedding is done using inline operators that do not
disrupt the regular language syntax.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
[yann.morin.1998@free.fr: drop empty _DEPENDENCIES]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
php-apcu needs threads since its addition in commit
8ddeeffa18:
In file included from /home/buildroot/autobuild/instance-3/output-1/build/php-apcu-5.1.20/apc_lock.c:20:
/home/buildroot/autobuild/instance-3/output-1/build/php-apcu-5.1.20/apc_lock.h:41:11: fatal error: pthread.h: No such file or directory
41 | # include "pthread.h"
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/314405423aeece5ee55d76ec5c4fa1919e7ee853
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libkrb5 does not build with libressl since commit
b7a5b9d06d and upstream is not interested
in fixing this issue as a PR is opened for more than 4 years
(https://github.com/krb5/krb5/pull/607):
pkinit_crypto_openssl.c: In function 'cms_signeddata_verify':
pkinit_crypto_openssl.c:1700:22: error: implicit declaration of function 'OBJ_get0_data'; did you mean 'BIO_get_data'? [-Werror=implicit-function-declaration]
1700 | print_buffer(OBJ_get0_data(etype), OBJ_length(etype));
| ^~~~~~~~~~~~~
| BIO_get_data
Fixes:
- http://autobuild.buildroot.org/results/e623f4e1d6b6004e98815b8b7da3938238890bd8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This allows to build against newer kernels (up to 5.18).
Tested on kernel v5.15.
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
CVE-2022-1271: arbitrary-file-write vulnerability
zgrep applied to a crafted file name with two or more newlines
can no longer overwrite an arbitrary, attacker-selected file.
[bug introduced in gzip-1.3.10]
https://www.openwall.com/lists/oss-security/2022/04/07/8
Other changes:
** Changes in behavior
'gzip -l' no longer misreports file lengths 4 GiB and larger.
Previously, 'gzip -l' output the 32-bit value stored in the gzip
header even though that is the uncompressed length modulo 2**32.
Now, 'gzip -l' calculates the uncompressed length by decompressing
the data and counting the resulting bytes. Although this can take
much more time, nowadays the correctness pros seem to outweigh the
performance cons.
'zless' is no longer installed on platforms lacking 'less'.
** Bug fixes
zgrep now names input file on error instead of mislabeling it as
"(standard input)", if grep supports the GNU -H and --label options.
'zdiff -C 5' no longer misbehaves by treating '5' as a file name.
[bug present since the beginning]
Configure-time options like --program-prefix now work.
Release Announcement:
https://lists.gnu.org/r/bug-gzip/2022-04/msg00011.html
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update out-of-tree driver to make it work with Linux kernel v5.17.
Signed-off-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update out-of-tree driver to make it work with Linux kernel v5.17
(and older kernels not compatible with previous driver version,
like v5.15 etc).
Signed-off-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pure-ftpd doesn't build with libressl 3.4.3 which doesn't include
f5674b4e23
resulting in the following build failure:
tls.c: In function 'tls_init_options':
tls.c:329:5: warning: implicit declaration of function 'SSL_CTX_set_num_tickets'; did you mean 'SSL_CTX_set_options'? [-Wimplicit-function-declaration]
SSL_CTX_set_num_tickets(tls_ctx, 0);
^~~~~~~~~~~~~~~~~~~~~~~
SSL_CTX_set_options
Fixes:
- http://autobuild.buildroot.org/results/f5d36180949278510199aa499e253780558c6ffe
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By returning a failure in the event that the initial seed doesn't exist,
we'd then skip creating a new seed, which means we'd never in fact have
an initial seed, and this script is therefore useless. Fix this by
checking for the existence of the seed file first, and just returning 0
if it's not there.
Reported-by: Nicolas Cavallari <Nicolas.Cavallari@green-communications.fr>
Reported-by: Eugen Hristev <Eugen.Hristev@microchip.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2022-28346: Potential SQL injection in QuerySet.annotate(), aggregate(), and extra()
QuerySet.annotate(), aggregate(), and extra() methods were subject to SQL
injection in column aliases, using a suitably crafted dictionary, with
dictionary expansion, as the **kwargs passed to these methods.
CVE-2022-28347: Potential SQL injection via QuerySet.explain(**options) on PostgreSQL
QuerySet.explain() method was subject to SQL injection in option names,
using a suitably crafted dictionary, with dictionary expansion, as the
**options argument.
For more details, see the advisory:
https://www.djangoproject.com/weblog/2022/apr/11/security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
16.24.1:
CVE-2021-37706 / AST-2022-004: pjproject: integer underflow on STUN message
The header length on incoming STUN messages that contain an ERROR-CODE
attribute is not properly checked. This can result in an integer underflow.
Note, this requires ICE or WebRTC support to be in use with a malicious
remote party.
https://seclists.org/fulldisclosure/2022/Mar/0
CVE-2022-23608 / AST-2022-005: pjproject: undefined behavior after freeing a
dialog set
When acting as a UAC, and when placing an outgoing call to a target that then
forks Asterisk may experience undefined behavior (crashes, hangs, etc…)
after a dialog set is prematurely freed.
https://seclists.org/fulldisclosure/2022/Mar/1
CVE-2022-21723 / AST-2022-006: pjproject: unconstrained malformed multipart
SIP message
If an incoming SIP message contains a malformed multi-part body an out of
bounds read access may occur, which can result in undefined behavior. Note,
it’s currently uncertain if there is any externally exploitable vector
within Asterisk for this issue, but providing this as a security issue out
of caution.
https://seclists.org/fulldisclosure/2022/Mar/2
16.25.2:
CVE-2022-26498 / AST-2022-001: res_stir_shaken: resource exhaustion with
large files
When using STIR/SHAKEN, it’s possible to download files that are not
certificates. These files could be much larger than what you would expect to
download.
https://seclists.org/fulldisclosure/2022/Apr/17
CVE-2022-26499 / AST-2022-002: res_stir_shaken: SSRF vulnerability with
Identity header
When using STIR/SHAKEN, it’s possible to send arbitrary requests like GET to
interfaces such as localhost using the Identity header.
https://seclists.org/fulldisclosure/2022/Apr/18
CVE-2022-26651 / AST-2022-003: func_odbc: Possible SQL Injection
Some databases can use backslashes to escape certain characters, such as
backticks. If input is provided to func_odbc which includes backslashes it
is possible for func_odbc to construct a broken SQL query and the SQL query
to fail.
https://seclists.org/fulldisclosure/2022/Apr/19
Update hash of sha1.c after a doxygen comment update:
37c29b6a28
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2022-1328: mutt_decode_uuencoded() can read past the of the input line
Buffer Overflow in uudecoder in Mutt affecting all versions starting from
0.94.13 before 2.2.3 allows read past end of input line
For details, see the release notes:
https://marc.info/?l=mutt-users&m=164979464612885&w=2
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SPI unconditionally uses GPIOHANDLE_SET_LINE_VALUES_IOCTL which is only
available since kernel 4.8 and
d7c51b47ac
resulting in the following build failure since switch to upstream in
commit 03fa36df7e:
linuxspi.c: In function 'linuxspi_reset_mcu':
linuxspi.c:102:28: error: storage size of 'data' isn't known
struct gpiohandle_data data;
^~~~
linuxspi.c:110:32: error: 'GPIOHANDLE_SET_LINE_VALUES_IOCTL' undeclared (first use in this function)
ret = ioctl(fd_linehandle, GPIOHANDLE_SET_LINE_VALUES_IOCTL, &data);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/769021040e5e9293584734e4f461baeaa6dd91cd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Update site to get latest version
- Switch to generic-package and drop patches as upstream doesn't provide
autotools support
- License is MIT since version 1.12.15
- This bump will fix the following build failure with BR2_OPTIMIZE_FAST:
src/sqlite3.c: In function 'sqlite3IsNaN':
src/sqlite3.c:21797:3: error: #error SQLite will not work correctly with the -ffast-math option of GCC.
21797 | # error SQLite will not work correctly with the -ffast-math option of GCC.
| ^~~~~
- This bump will also fix security issues by bumping sqlite to 3.36.0
- Update indentation in hash file (two spaces)
http://sqlitewrapper.kompex-online.com/index.php?content=changelog
Fixes:
- http://autobuild.buildroot.org/results/63e07345b97faa6d6239933f1790c6f2e02da77f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Internal bind libraries are not installed to target since commit
0c8dd6ebd6 resulting in the following
runtime failure:
Starting DHCP server: /usr/sbin/dhcpd: error while loading shared libraries: libirs.so.161: cannot open shared object file: No such file or directory
RANLIB must also be set to avoid the following build failure at install
step:
libtool: install: arceb-buildroot-linux-uclibc-ranlib /home/fabrice/buildroot/output/per-package/dhcp/target/usr/lib/libisccfg.a
/home/fabrice/buildroot/output/build/dhcp-4.4.3/bind/bind-9.11.36/libtool: line 1719: arceb-buildroot-linux-uclibc-ranlib: command not found
Fixes:
- No autobuilder failures (reported by Eugen.Hristev@microchip.com)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
docker-proxy (libnetwork) has not added a release tag for a long time. Use
the latest master commit hash from 04 Apr 2022 instead.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2021-28544: SVN authz protected copyfrom paths regression
Subversion servers reveal 'copyfrom' paths that should be hidden according
to configured path-based authorization (authz) rules. When a node has
been copied from a protected location, users with access to the copy can
see the `copyfrom' path of the original. This also reveals the fact that
the node was copied. Only the 'copyfrom' path is revealed; not its
contents. Both httpd and svnserve servers are vulnerable.
https://subversion.apache.org/security/CVE-2021-28544-advisory.txt
- CVE-2022-24070: Subversion's mod_dav_svn is vulnerable to memory corruption
While looking up path-based authorization rules, mod_dav_svn servers may
attempt to use memory which has already been freed.
https://subversion.apache.org/security/CVE-2022-24070-advisory.txt
Drop no longer needed patch and autoreconf, as this is now fixed upstream:
https://svn.apache.org/viewvc?view=revision&revision=1881534
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2022-24765:
On multi-user machines, Git users might find themselves unexpectedly in
a Git worktree, e.g. when there is a scratch space (`/scratch/`) intended
for all users and another user created a repository in `/scratch/.git`.
Merely having a Git-aware prompt that runs `git status` (or `git diff`)
and navigating to a directory which is supposedly not a Git worktree, or
opening such a directory in an editor or IDE such as VS Code or Atom, will
potentially run commands defined by that other user via
`/scratch/.git/config`.
https://www.openwall.com/lists/oss-security/2022/04/12/7
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.9 (released 2022-04-12) includes security fixes to the
crypto/elliptic and encoding/pem packages, as well as bug fixes to the
linker and runtime.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Override CPPFLAGS to fix the following build failure with BR2_OPTIMIZE_0
raised since bump to version 0.14.0 in commit
cd707a9112 and
0e7b2b0300:
/home/autobuild/autobuild/instance-15/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/include/features.h:412:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
configure adds -D_FORTIFY_SOURCE to CPPFLAGS if it is not already
defined. However, we don't want _FORTIFY_SOURCE to be enabled unless
it's enabled by Buildroot (for exactly the above reason). Therefore,
override CPPFLAGS in th build step to remove _FORTIFY_SOURCE again.
It should be noted that upstream already rejected a PR to remove
-Werror: https://github.com/smuellerDD/libkcapi/pull/132
Fixes:
- http://autobuild.buildroot.org/results/35141ea3046f5a4593e0b27ef92e4ace6bc0be66
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patches that are now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove the hard coded disabling of altivec and vsx, and instead use the
BR2_POWERPC_CPU_HAS_VSX and BR2_POWERPC_CPU_HAS_ALTIVEC variables to
control the flags.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[Arnout: rewrite with $(if ...) and --enable]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduced to allow VSX to be selectively enabled for packages that
support it. Initially used by libnss.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
zlib-ng's build system does not correctly detect if it supports the
Power8 feature. Force it off to fix building for configurations that
don't support the vector builtin functions.
For example, building for BR2_powerpc_601:
warning: implicit declaration of function ‘vec_xl’; did you mean
‘vec_rl’? [-Wimplicit-function-declaration]
93 | vbuf = vec_xl(0, (unsigned char *) buf);
This logic was incorrectly removed in commit 04e26cb7fe.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
cc1: error: ‘-fcf-protection’ is not compatible with this target
The new Ubuntu GCC packages (e.g. Ubuntu 11.2.0-7ubuntu2, 11.2.0) turn
on ‘-fcf-protection’ globally, which causes a build failure in the x86
realmode code. Turn it off explicitly on compilers that understand this
option.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since switch to meson-package in
commit 1db1322639 and
957a015157:
The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-14/output-1/host/bin/or1k-buildroot-linux-musl-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-14/output-1/host/bin/or1k-buildroot-linux-musl-g++'"
Fixes:
- http://autobuild.buildroot.org/results/1d52c8100414aa384572b23006a13f9b806d2d5a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The wireplumber currently as "dbus" in its DEPENDENCIES, but it does
not select/depend on it at the Kconfig level. A simple configuration
such as:
BR2_PACKAGE_LUA=y
BR2_PACKAGE_PIPEWIRE=y
BR2_PACKAGE_WIREPLUMBER=y
Therefore fails to build with:
Makefile:576: *** dbus is in the dependency chain of wireplumber that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
Since dbus is actually an optional dependency of wireplumber, this
commit fixes the issue by really handling it as an optional
dependency.
Fixes: c9a3c10417 ("package/wireplumber: new package")
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is quite a version jump, so there are a lot of individual changes,
see: https://github.com/warmcat/libwebsockets/blob/v4.3.1/changelog
LICENSE has also changed:
- More items with license "MIT" were added:
- lib/misc/base64-decode.c
- lib/plat/windows/windows-resolv.c
- One more item with a 2-Clause BSD license was added:
- lib/misc/ieeehalfprecision.c
- Sublicense texts were copied into LICENSE
These should still be compatible with "MIT with exceptions" stated in
`libwebsockets.mk`.
Signed-off-by: Johannes Agricola <johannes.agricola@work-microwave.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building gen tool of the internal (bundled) bind needs to be for host, not target
Switch to use internal build in commit 0c8dd6ebd6
overlooked this.
Building dns library in /home/autobuild/autobuild/instance-13/output-1/build/dhcp-4.4.2-P1/bind/bind-9.11.14/lib/dns
/bin/sh: line 1: ./gen: cannot execute binary file: Exec format error
Thus, we need to set not just CC, but also CFLAGS etc. otherwise the
target CFLAGS etc. will be inherited from top-level configure.
Fixes:
- http://autobuild.buildroot.org/results/da6fd904d1a6bae73b6ff89dd008de1f459bb7d7/
Signed-off-by: Tim Hammer <Tim.Hammer@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without NPTL raised since bump to
version 14.1 in commit c9bd029115 and
44bf3d5083:
In file included from pthread_barrier_wait.c:16:
../../src/include/port/pg_pthread.h:31:3: error: conflicting types for 'pthread_barrier_t'
31 | } pthread_barrier_t;
| ^~~~~~~~~~~~~~~~~
In file included from /home/autobuild/autobuild/instance-11/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/include/bits/uClibc_stdio.h:114,
from /home/autobuild/autobuild/instance-11/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:71,
from ../../src/include/c.h:59,
from pthread_barrier_wait.c:14:
/home/autobuild/autobuild/instance-11/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/include/bits/pthreadtypes.h:135:3: note: previous declaration of 'pthread_barrier_t' was here
135 | } pthread_barrier_t;
| ^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/70acbe121236ef0905c4466d4f7a0839723d2c49
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Set LSOF_AR and LSOF_CC to be able to drop first patch which is not
upstreamable: https://github.com/lsof-org/lsof/issues/197
$(TARGET_CONFIGURE_OPTS) must also be removed to avoid overriding AR
and so we can drop LSOF_CFLAGS_OVERRIDE=1 and third patch
DEBUG="$(TARGET_CFLAGS)" can also be dropped from LSOF_BUILD_CMDS as it
is already set in LSOF_CONFIGURE_CMDS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: add quotes around TARGET_CC]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
- The rules for acceptance of records into the cache have been tightened to
prevent the possibility of poisoning if forwarders send records outside
the configured bailiwick. (CVE-2021-25220)
- TCP connections with keep-response-order enabled could leave the TCP
sockets in the CLOSE_WAIT state when the client did not properly shut down
the connection. (CVE-2022-0396)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with BR2_SHARED_STATIC_LIBS:
CMake Error at src/CMakeLists.txt:56 (add_library):
add_library cannot create target "belr" because another target with the
same name already exists. The existing target is a static library created
in source directory
Fixes:
- http://autobuild.buildroot.org/results/d1ef96c8f370b5a522985c37f1681dd10bbc15bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: simplify/add comment explaining why]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl > 2.7.0:
/nvmedata/autobuild/instance-21/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblaze-buildroot-linux-musl/11.2.0/../../../../microblaze-buildroot-linux-musl/bin/ld: /nvmedata/autobuild/instance-21/output-1/host/microblaze-buildroot-linux-musl/sysroot/usr/lib/libcrypto.a(x509_lu.c.o): in function `X509_OBJECT_get0_X509_CRL':
(.text+0xc3c): multiple definition of `X509_OBJECT_get0_X509_CRL'; /nvmedata/autobuild/instance-21/output-1/build/lftp-4.9.2/src/.libs/liblftp-network.a(liblftp_network_la-lftp_ssl.o):(.text+0x894): first defined here
Fixes:
- http://autobuild.buildroot.org/results/7fd1dfd5bc750ae5a3278ca950c838ae90704b23
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-1154: Use after free in utf_ptr2char in GitHub repository
vim/vim prior to 8.2.4646.
Fix CVE-2022-1160: heap buffer overflow in get_one_sourceline in GitHub
repository vim/vim prior to 8.2.4647.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the major release changed I've built successfully all packages that
have direct dependency to harfbuzz:
- efl
- libass
- mupdf
- pango
- qt5base
- sdl2_ttf
- supertuxkart
- vlc
- webkitgtk
- wpewebkit
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gst1-plugins-bad needs C++ since switch to meson-package in commit
5d6c408e95:
The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-8/output-1/host/bin/microblaze-buildroot-linux-musl-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-8/output-1/host/bin/microblaze-buildroot-linux-musl-g++'"
Rewriting the meson.build so it only requires C++ for the modules that
are actually written in C++ is quite complicated, so just let the whole
package depend on C++. Hopefully however this is going to be fixed in
some future release. Therefore, the dependencies for individual modules
are kept as well (even though they're redundant now).
Fixes:
- http://autobuild.buildroot.org/results/8f924cebeb8a1ed73e57103bf3073fb8f8d8752e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without C++ raised since bump to version
1.18.0 in commit 15dc48ca9b:
The following exception(s) were encountered:
Running "/nvmedata/autobuild/instance-9/output-1/host/bin/or1k-buildroot-linux-musl-g++ --version" gave "[Errno 2] No such file or directory: '/nvmedata/autobuild/instance-9/output-1/host/bin/or1k-buildroot-linux-musl-g++'"
Fixes:
- http://autobuild.buildroot.org/results/8ac0ba5eaaf7571857b4d8cfabf1488d640dc59a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to a new major release which brings in improvements and a few new
features. Release notes:
https://wpewebkit.org/release/wpewebkit-2.36.0.html
None of the new features need additional dependencies. The build option
USE_SYSTEMD has been renamed to ENABLE_JOURNALD_LOG, though.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If enabled at build time, WebKit's internal nested compositor can work
more efficiently when targeting Wayland, by avoiding one unneeded buffer
copy. The build option has been available for a few years in WebKitGTK
releases.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This enables a new security feature "SAE Public Key".
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This enables a new security feature "SAE Public Key".
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Note: this version adds compatibility for Go 1.18.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are host toolchains available for non-x86/x86_64 architectures,
add them as supported along with their toolchain hashes.
Note that the gcc riscv64-unknown-linux-gnu arch needs to be mapped
to the rust riscv64gc-unknown-linux-gnu arch.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently we only test a limited set of toolchains that are mostly
prebuilt, add a flag to allow using randconfig for randomizing
additional toolchain settings instead of randpackageconfig.
To avoid invalid configs we need to add additional config validation
filtering and fixups. Although the loop around 'make randconfig'
attempts does make sure we eventually end up with a valid configuration,
there is a bias towards e.g. disabling the kernel. It would be possible
to e.g. always force BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y, but
that removes the possibility for a toolchains-csv config to add a valid
custom defconfig. (Note that currently this isn't possible anyway since
'make randpackageconfig' is used if a toolchains-csv is provided, but
eventually we want to use 'make randconfig' also if a toolchains-csv is
provided.)
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
0.23.1 has compilation errors with recent kernels.
0.27.1 changed license for userspace from GPLv2 to Apache and added MIT
option for driver.
New dependencies: c-ares, grpc, protobuf, tbb. There's also a dependency
on gtest, but only if tests are enabled. Therefore, add conf opt to
disable tests.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
[Arnout:
- Add Francis to DEVELOPERS for sysdig.
- Add link to source of patch 2.
- Remove N/M from patch 2 (check-package).
- Correct license info and hashes.
- Remove gtest dependency.
- Add -DCREATE_TEST_TARGETS=OFF conf opt.
- Propagate Config.in dependencies of reverse dependencies.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Intel Threading Building Blocks (TBB), is a C++ library to help developers
write highly parallelized applications. OpenCV uses it to accelerate some of
it's more heavy weight procedures.
Signed-off-by: bradford barr <bradford@density.io>
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
[Arnout:
- add LICENSE hash;
- replace patch with explicit passing of CPLUS, CONLY, CXXFLAGS;
- rework handling of arch and add comment about it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update the qemu_xtensa_lx60_nommu_defconfig to use the
busybox-minimal.config.
After commit 3de486f8b0 ("package/busybox: fix udhcpc options in minimal
config"), this has the benefit of fixing the following network
initialization failure:
udhcpc: invalid option -- b
With the full busybox config, the -b option would still be passed and
udhcpc would fail to start for the reason above.
Note that on NOMMU, udhcpc backgrounds unconditionally (unless the -f
option is given), so it still behaves properly. The -b option in fact
only backgrounds after the lease is obtained; on NOMMU, backgrounding is
done before the lease is even requested. So the behaviour is more or
less the same, except that on MMU systems, networking can be considered
either up or not available after S20network, but on NOMMU there is no
such guarantee.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Gerome Burlats <gerome.burlats@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
http://autobuild.buildroot.net/results/194/1941e194e1f5ad0bc4982ad39c3e34d266bc49c6/
opus requires that it is configured with --enable-float-approx when
-ffast-math (BR2_OPTIMIZE_FAST) is used, otherwise it errors out at build
time:
celt/arch.h:198:2: error: #error Cannot build libopus with -ffast-math
unless FLOAT_APPROX is defined. This could result in crashes on extreme
(e.g. NaN) input
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl raised since the addition
of the package in commit 3621918d1b:
/home/autobuild/autobuild/instance-10/output-1/build/ace-7.0.6/ace/SSL/SSL_Asynch_BIO.cpp:174:7: error: 'BIO_get_init' was not declared in this scope; did you mean 'BIO_set_init'?
174 | if (BIO_get_init(pBIO) == 0 || p_stream == 0 || buf == 0 || len <= 0)
| ^~~~~~~~~~~~
| BIO_set_init
Fixes:
- http://autobuild.buildroot.org/results/386afa88ac9e5e3bb65dddeabf610bb1e9bc4285
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 192dfc68c0 ("package/zlib-ng: fix build on powerpc") turned the
Power8 optimisations off to fix a build issue. Instead apply a patch
from the develop branch upstream to fix the issue.
This patch is not yet in a released version of zlib-ng.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This also removes the dependency to have Python2 installed.
Signed-off-by: Steve Critchlow <scritchlow@bioshall.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move supported host architectures under
BR2_PACKAGE_HOST_PROTOBUF_ARCH_SUPPORTS and propagate the reverse
dependency.
Add additional supported host architectures based on current
src/google/protobuf/stubs/platform_macros.h
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
glib-networking raises the following build failure with libressl:
../tls/openssl/gtlsconnection-openssl.c: In function 'g_tls_connection_openssl_handshake_thread_request_rehandshake':
../tls/openssl/gtlsconnection-openssl.c:419:27: error: 'TLS1_3_VERSION' undeclared (first use in this function); did you mean 'TLS1_2_VERSION'?
419 | if (SSL_version(ssl) >= TLS1_3_VERSION)
| ^~~~~~~~~~~~~~
| TLS1_2_VERSION
../tls/openssl/gtlsconnection-openssl.c:419:27: note: each undeclared identifier is reported only once for each function it appears in
../tls/openssl/gtlsconnection-openssl.c:420:11: error: implicit declaration of function 'SSL_key_update' [-Werror=implicit-function-declaration]
420 | ret = SSL_key_update (ssl, SSL_KEY_UPDATE_REQUESTED);
| ^~~~~~~~~~~~~~
Since libressl doesn't (intend to) support post-1.0.2 openssl
compatibility, this is only going to get worse. Therefore, require
libopenssl.
Fixes:
- http://autobuild.buildroot.org/results/b8dea5704903c84858c7a339a73ecb713ac2791c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since the addition of the package
in commit 47acda3a95:
/home/autobuild/autobuild/instance-9/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: src/libpsl.so.5.3.2.p/psl.c.o: in function `psl_str_to_utf8lower':
psl.c:(.text+0x1584): undefined reference to `libiconv_open'
Fixes:
- http://autobuild.buildroot.org/results/8f012331acd3edb96a69d374436884679add8860
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable vsx to avoid the following build failure on ppc64 raised since
bump to version 1.3.3 in commit 89337e4f39
and
cdb030cd37:
In file included from lpc_intrin_vsx.c:46:
/home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/powerpc64-buildroot-linux-gnu/9.4.0/include/altivec.h:34:2: error: #error Use the "-maltivec" flag to enable PowerPC AltiVec support
34 | #error Use the "-maltivec" flag to enable PowerPC AltiVec support
| ^~~~~
lpc_intrin_vsx.c: In function 'FLAC__lpc_compute_autocorrelation_intrin_power8_vsx_lag_16':
lpc_intrin_vsx.c:94:7: warning: implicit declaration of function 'vec_vsx_ld'; did you mean 'vec_vslh'? [-Wimplicit-function-declaration]
94 | d0 = vec_vsx_ld(0, base);
| ^~~~~~~~~~
| vec_vslh
Fixes:
- http://autobuild.buildroot.org/results/a97a0522c58964fa51815236bc39b378e10b5008
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-brotli needs C++ since its addition in commit
2f176b837b so add a comment about it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a dependency on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS to avoid
the following build failure when GO_GOARCH is empty (e.g. on mips32)
which leads to an empty --arch argument in the sloci-image call, raised
since the addition of the package in commmit
ccda2f4bdc:
printf ' rm -rf /home/autobuild/autobuild/instance-6/output-1/images/rootfs-oci\n /home/autobuild/autobuild/instance-6/output-1/host/bin/sloci-image --arch --entrypoint "sh" --author "Buildroot" --user "0" /home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/target /home/autobuild/autobuild/instance-6/output-1/images/rootfs-oci:latest\n' >> /home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/fakeroot
chmod a+x /home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/fakeroot
PATH="/home/autobuild/autobuild/instance-6/output-1/host/bin:/home/autobuild/autobuild/instance-6/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" FAKEROOTDONTTRYCHOWN=1 /home/autobuild/autobuild/instance-6/output-1/host/bin/fakeroot -- /home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/fakeroot
rootdir=/home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/target
table='/home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/full_devices_table.txt'
Usage:
sloci-image [options] ROOTFS NAME[:TAG]
sloci-image [-h | -V]
Create a single-layer OCI image with the given rootfs.
Arguments:
ROOTFS Directory or tar.gz archive with rootfs to pack into the image.
Important: Archive will be *moved* to the image, so make a copy if you
need it. Directory will be preserved.
NAME Name of the image.
TAG Tag for the image. Defaults to "latest".
Options:
-m --arch ARCH CPU architecture which the binaries in this image are built to run on.
Defaults to $(uname -m).
--arch-variant Variant of the CPU. This is typically used only for arm (v6, v7, v8).
-a --author NAME Name and/or email address of the person which created the image.
-c --cmd CMD Default arguments to the entrypoint of the container.
--debug Print debug messages (it can be also enabled with env. variable DEBUG).
-C --entrypoint EP Arguments to use as the command to execute when the container starts.
-e --env VAR=VAL Default environment variables for container.
-l --label KEY=VALUE Metadata for the container compliant with OCI annotation rules.
If KEY starts with a dot, it will be prefixed with
"org.opencontainers.image" (e.g. .url -> org.opencontainers.image.url).
--os OS Name of the OS which the image is built to run on. Defaults to "linux".
-p --port PORT[/PROT] Default set of ports to expose from a container running this image in
format: <port>/tcp, <port>/udp, or <port> (same as <port>/tcp).
Aliases: --expose.
-t --tar Pack image in a TAR archive.
-u --user USER The username or UID of user the process run as.
-v --volume PATH Default set of directories describing where the process is likely write
data specific to a container instance.
-w --working-dir DIR Sets the current working directory of the entrypoint process in the
container.
-V --version Print version and exit.
-h --help Print this message and exit.
Please report bugs at <https://github.com/jirutka/sloci-image/issues>.
make: *** [fs/oci/oci.mk:99: /home/autobuild/autobuild/instance-6/output-1/images/rootfs.oci] Error 1
Fixes:
- http://autobuild.buildroot.org/results/44da17a393421dfcb8bbdd63074cb82b436dfa94
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ipmiutil depends on dynamic library since commit
670095b473 so test on BR2_STATIC_LIBS
added by commit 9f31cd14d0 is not needed
anymore
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
udpcast unconditionally build manpages which will raise the following
build failure without pod2man since at least bump to version 20200328 in
commit 4fb91d8b9d:
sh: line 1: pod2man: command not found
To fix this issue, rework how udpcast is built and installed to always
build and install the sender or the receiver and never build the
manpages. As a side effect, this will also avoid to install the unneeded
rateGovernor.h
Fixes:
- http://autobuild.buildroot.org/results/ce602a09357e950d79794391cd4a852d565914f1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
An out-of-bounds array read in the apr_time_exp*() functions was fixed
in the Apache Portable Runtime 1.6.3 release (CVE-2017-12613). The fix
for this issue was not carried forward to the APR 1.7.x branch, and
hence version 1.7.0 regressed compared to 1.6.3 and is vulnerable to the
same issue.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with uclibc-ng and grpc raised on arm
and ppc:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libabsl_random_internal_randen_hwaes.so.2111.0.0: undefined reference to `getauxval'
Strangely enough it seems there is only one autobuilder failure despite
the fact that libabseil-cpp is unconditionally using getauxval since its
addition in commit 93568440ed:
https://github.com/abseil/abseil-cpp/blob/20200225/absl/random/internal/randen_detect.cc
Perhaps this build failure is an unexpected side effect of commit
8251d8c255
Fixes:
- http://autobuild.buildroot.org/results/775f3ca3dedebff29e212b29dfa896b7613b7a02
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gobject-introspection is an optional dependency which is enabled by
default since
0d7bf34ed6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
moved under the hat of https://github.com/lunarmodules
remove upstream patch
diff LICENSE:
-The MIT License (MIT)
-Copyright (c) 2013 Tomás Guisasola
+Copyright (C) 2003-2007 The Kepler Project, 2013-2022 Matthew Wild
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Handle WITH_POWER8 to fix the following build failure with powerpc and
libglib2 raised since bump to version 1.9.9-b1 in commit
1f7b12a0b4 and
b81f4ee96d:
/home/autobuild/autobuild/instance-9/output-1/host/lib/gcc/powerpc-buildroot-linux-musl/11.2.0/../../../../powerpc-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-9/output-1/host/powerpc-buildroot-linux-musl/sysroot/usr/lib/libz.a(adler32_power8.c.o): in function `adler32_power8':
/home/autobuild/autobuild/instance-9/output-1/build/zlib-ng-2.0.6/arch/power/adler32_power8.c:106: undefined reference to `vec_sumsu'
Fixes:
- http://autobuild.buildroot.org/results/f864a0e2307e25342b45c90a5b4fb57a0f5c1c93
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable tests which are enabled by default in debug mode since bump to
version 2.0.0 in commit 2a3edc5e00 and
e84f12fc5e
as they will raise the following build failure if cmocka is built before
libyang:
In file included from /home/buildroot/autobuild/instance-0/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/stdint.h:20,
from /home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/lib/gcc/riscv64-buildroot-linux-musl/10.3.0/include/stdint.h:9,
from /home/buildroot/autobuild/instance-0/output-1/build/libyang-2.0.112/src/libyang.h:18,
from /home/buildroot/autobuild/instance-0/output-1/build/libyang-2.0.112/tests/utests/utests.h:30,
from /home/buildroot/autobuild/instance-0/output-1/build/libyang-2.0.112/tests/utests/extensions/test_yangdata.c:15:
/home/buildroot/autobuild/instance-0/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/bits/alltypes.h:53:24: error: conflicting types for 'uintptr_t'
53 | typedef unsigned _Addr uintptr_t;
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/7ae21fbb28b1a69183c5d8ed87cf5f5cbf055026
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Allow to build the BCM2835 bitbang interface on aarch64.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In 7130bcb44c (package/linux-firmware: Add Intel WiFi
3945ABG/BG/4965AGN), I improperly fixed the two drivers names...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add Intel WiFi 3945ABG/BG and 4965AGN firmware. This firmware is
required for the iwl4965 and iwl3945 kernel driver.
Signed-off-by: Stefan Agner <stefan@agner.ch>
[yann.morin.1998@free.fr: fix driver names in help texts]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use /usr target/staging prefix and / host prefix.
This allows the Python interpreter to find packages built via the new
Flit infrastructure.
Fixes: #14721
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Replace the remaining git:// URLs with their https:// equivalents as
this is more secure and also more palatable to corporate firewalls.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
[yann.morin.1998@free.fr: convert dahdi-linux too]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
pkg-stats currently uses the services from support/scripts/cpedb.py to
match the CPE identifiers of packages with the official CPE database.
Unfortunately, the cpedb.py code uses regular ElementTree parsing,
which involves loading the full XML tree into memory. This causes the
pkg-stats process to consume a huge amount of memory:
thomas 1310458 85.2 21.4 3708952 3450164 pts/5 R+ 16:04 0:33 | | \_ python3 ./support/scripts/pkg-stats
So, 3.7 GB of VSZ and 3.4 GB of RSS are used by the pkg-stats
process. This is causing the OOM killer to kick-in on machines with
relatively low memory.
This commit reimplements the XML parsing needed to do the CPE matching
directly in pkg-stats, using the XmlParser functionality of
ElementTree, also called "streaming parsing". Thanks to this, we never
load the entire XML tree in RAM, but only stream it through the
parser, and construct a very simple list of all CPE identifiers. The
max memory consumption of pkg-stats is now:
thomas 1317511 74.2 0.9 381104 152224 pts/5 R+ 16:08 0:17 | | \_ python3 ./support/scripts/pkg-stats
So, 381 MB of VSZ and 152 MB of RSS, which is obviously much better.
The JSON output of pkg-stats for the full package set, before and after
this commit, is exactly identical.
Now, one will probably wonder why this isn't directly changed in
cpedb.py. The reason is simple: cpedb.py is also used by
support/scripts/missing-cpe, which (for now) heavily relies on having
in memory the ElementTree objects, to re-generate a snippet of XML
that allows us to submit to NIST new CPE entries.
So, future work could include one of those two options:
(1) Re-integrate cpedb.py into missing-cpe directly, and live with
two different ways of processing the CPE database.
(2) Rewrite the missing-cpe logic to also be compatible with a
streaming parsing, which would allow this logic to be again
shared between pkg-stats and missing-cpe.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add missing import of requests
- import CPEDB_URL from cpedb, instead of duplicating it
- fix flake8 errors
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some upstream sites are very slow to respond, and the default timeout
of 300 seconds of the aiohttp.ClientSession() is too long. Let's
reduce it to 15 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- License has been changed from GPL to LGPL or BSD-3-Clause
- Drop upstream patches
Signed-off-by: Daniel Lang <d.lang@abatec.at>
[Arnout: license is actually LGPL-3.0+, not LGPL-3.0]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When libxkbcommon is disabled, QT_CONFIG(xkbcommon) is not defined which
means the variable and function pointer in this patch are compiled out
from the header, but the cpp code actually still made use of it. This
patch fixes the build issue when libxkbcommon package is not to be
built.
This patch was taken from (merged):
https://codereview.qt-project.org/c/qt/qtwayland/+/344916
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
qt5wayland package currently has a bug if the xkbcommon Qt config is not
enabled which highlighted a race issues between qt5base, libxkbcommon
and qt5wayland.
qt5wayland has a dependency on libxkbcommon package if it's enabled.
qt5base only has a dependency on libxkbcommon if xcb support is to be
enabled.
If libxkbcommon package is built before qt5base, qt5base will detect it
during its configure step and enable the Qt config accordingly. This
will make it available to qt5wayland afterwards, even if xcb support is
not enabled in Buildroot Kconfig.
However, if qt5base is built before libxkbcommon is, qt5base will not
advertise support of xbcommon feature to qt5wayland (which will fail its
build because of a bug in the source code).
Since the package build order should not impact the outcome of the
build, let's explicit the dependency if and only if libxkbcommon package
is to be compiled at some point in time so that at least this feature is
not susceptible to races.
Move the xkbcommon entries out of the BR2_PACKAGE_QT5BASE_XCB condition,
instead make them depend on BR2_PACKAGE_LIBXKBCOMMON. Since
BR2_PACKAGE_QT5BASE_XCB selects BR2_PACKAGE_LIBXKBCOMMON they are still
included if xcb is selected.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[Arnout: remove the already existing xkbcommon entries]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The patches aren't in Buildroot anymore but in the qt5base sources
directly, so let's give the commit hash of the fixes instead.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
moved under the hat of https://github.com/lunarmodules
diff LICENSE:
-LuaSocket 3.0 license
-Copyright � 2004-2013 Diego Nehab
+Copyright (C) 2004-2022 Diego Nehab
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CONTRIBUTING.md hash changed due to various style updates.
Set new default wifi backend config option to iwd when enabled in
cases where the default wpa_supplicant is not enabled.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: dbus/sigsegv.c.17.o: in function `signal_segv':
sigsegv.c:(.text+0x98): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/dca49cb9b3e66fac921601560e9358bcce9acffc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The busybox-minimal.config, which is used by systems without an MMU, specifies
the "-b" command line option for udhcpc. However, this option is not supported
by BusyBox udhcpc anymore since version 1.27.0 when building for systems
without an MMU.
Remove the "-b" option from busybox-minimal.config to repair network
initialization on systems without an MMU.
This fixes the following network initialization failure:
udhcpc: invalid option -- b
FAIL
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libsndfile is only needed to build jackrec example client
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libsamplerate is only needed to build the NetJack backend and internal
client
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit c5d441b7f2 (boot/optee-os: bump to version 3.16.0) forgot to
propagate the rustc arch dependency from the new version, to the default
clause of the choice.
This leaves only the custom git tree as a posible source for building
OP-TEE OS in case the host can't have a rustc compiler.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Clément Léger <clement.leger@bootlin.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The license file has updated the copyright year to 2022, therefore
update the hash of the license file as well.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Don't pass TARGET_CONFIGURE_OPTS in LIBSCRYPT_MAKE_OPTS to avoid
overriding CFLAGS (and so loossing -fPIC). This will fix the following
build failure raised since bump to version 1.22 in commit
4542c6714d:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblazeel-buildroot-linux-uclibc/10.3.0/../../../../microblazeel-buildroot-linux-uclibc/bin/ld: BFD (GNU Binutils) 2.36.1 assertion fail elf32-microblaze.c:1534
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblazeel-buildroot-linux-uclibc/10.3.0/../../../../microblazeel-buildroot-linux-uclibc/bin/ld: sha256.o: probably compiled without -fPIC?
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblazeel-buildroot-linux-uclibc/10.3.0/../../../../microblazeel-buildroot-linux-uclibc/bin/ld: final link failed: bad value
Fixes:
- http://autobuild.buildroot.org/results/ba4234ad305badb5ce815080ddcad6727e8d51c4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- bump to version in Linux 5.8 (depends on SPI_TX_OCTAL/SPI_RX_OCTAL
available since Linux 5.0)
Changelog (since 4.10):
9006a7b3220e spi: spidev_test: add option to continuously transfer data
35386dfd13b7 spi: spidev_test: Improve decoded text part of hex dump
84a14ae8c44f treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178
020bd6c48ebd spi: spidev_test: Remove break after exit statement
1f3c36328a48 spi: spidev_test: Check input_tx and input_file first after parse options
470a072e1220 spi: spidev_test: Use perror() only if errno is not 0
896fa735084e spi: spidev_test: Add support for Octal mode data transfers
9ec8ade81224 spi: spidev_test: Use %u to format unsigned numbers
bd2077915bfe spi: tools: Make default_tx/rx and input_tx static
- update Config.in help text
- indent hashes by 2 spaces
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libminiupnpc can be statically built with or without binfmt flat since
version 1.7 and
c183a72c46
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CVE-2021-38593 fixes originally missed a usecase that was covered by the
to-be-removed patch. However, this patch was incorrect and added some
issues on its own, which was then fixed by now-removed
0012-Refix-for-avoiding-huge-number-of-tiny-dashes.patch.
Unfortunately for us, the to-be-removed patch (fixed by
0012-Refix-for-avoiding-huge-number-of-tiny-dashes.patch) can actually
be applied (with fuzz; by `patch` only) on top of the now-removed patch.
When the move to KDE Qt fork was made, some patches were removed as they
were already part of the new git fork. However, the to-be-removed patch
was not. This means the
0012-Refix-for-avoiding-huge-number-of-tiny-dashes.patch was actually
undone when Buildroot patched qt5base.
Let's remove this patch to fix this oversight.
As a reference:
e7ea2ed27c Improve fix for avoiding huge number of tiny dashes
fixed by
65b3aa6a1c Refix for avoiding huge number of tiny dashes
in the git repo.
Fixes: 5770a645a3 "package/qt5: bump packages to latest kde submodule versions"
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[Arnout: renumber patches 0007 and 0008]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch has been applied upstream and is required to allow having
default devices on non x86_64 platforms with WirePlumber v0.4.8.
e429db7e8c
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 0.40.2 in
commit 6acdbb81c8:
[108/298] Generating src/librygel-core/RygelCore-2.6.typelib with a custom command
FAILED: src/librygel-core/RygelCore-2.6.typelib
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler --output src/librygel-core/RygelCore-2.6.typelib /home/giuliobenetti/autobuild/run/instance-3/output-1/build/rygel-0.40.2/build/src/librygel-core/RygelCore-2.6.gir
Could not find GIR file 'GUPnP-1.2.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file /home/giuliobenetti/autobuild/run/instance-3/output-1/build/rygel-0.40.2/build/src/librygel-core/RygelCore-2.6.gir: Failed to parse included gir GUPnP-1.2
Fixes:
- http://autobuild.buildroot.org/results/2b8956818f03f66a53480f7ed5fc0abb4f05288d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
reintroduction of the package in commit
16ff948444:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libabsl_stacktrace.so.2111.0.0: undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/63ab2bc86cad03d5258492b17d1707078761d9b3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enable the python-rpi-gpio package on 64-bit ARM architectures. I've tested
this with a Raspberry Pi 4 64-bit and Python 3 build and it works as expected.
Signed-off-by: Mirza Kapetanovic <mirza.kapetanovic@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When generating a filesystem image on a power10 build machine running
Ubuntu, we see a segfault when fakeroot is running chmod.
This has been reported and fixed upstream in Debian in version 1.26-1.2:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=995393#53
Add the same patch to resolve the segfault.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[Arnout: add patch signoff and give proper name (check-package)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
I'm involved in the upstream kvm-unit-tests and the mcf5208 QEMU
machine, so I could help to have a look on these files, too.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patches that are now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While upstream pistache has not yet released a stable 'tag'
a lot has changed since June 2020:
* project has moved to meson build system, cmake builds
do not install headers.
* patches in buildroot are no longer required
* project-implemented Pistache::Optional was replaced by
use of std::optional. This is only available in C++17
* dependency to rapidjson has been introduced
Signed-off-by: Thomas Ruschival <thomas@ruschival.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to autotools-package to avoid the following static build failure
since commit d661740201:
[ 56%] Linking C executable rtl_biast
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-musl/10.3.0/../../../../riscv64-buildroot-linux-musl/bin/ld: attempted static link of dynamic object `/home/peko/autobuild/instance-1/output-1/host/riscv64-buildroot-linux-musl/sysroot/lib/libatomic.so'
collect2: error: ld returned 1 exit status
Drop both cmake-related patches
Fixes:
- http://autobuild.buildroot.org/results/cf84759682848db8ed5610e1abe5a92337d0e957
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Writing into /dev/urandom doesn't actually credit any entropy bits. And
while it adds that data to the entropy pool, it won't actually be
immediately used when reading from /dev/urandom subsequently. This is
how the kernel's /dev/urandom has always worked, unfortunately.
As a result of this behavior, which may be understandably surprising,
writing a good seed file into /dev/urandom and then saving a new seed
file immediately after is dangerous, because the new seed file may wind
up being entirely deterministic, even if the old seed file was quite
good.
This has been fixed in systemd with
<da2862ef06>,
and fortunately it's possible to do the same thing in shell script here.
Specifically, instead of just saving new /dev/urandom output straight
up, we hash the new /dev/urandom together with the old seed, in order to
produce the new seed. This way the amount of entropy in the new seed
will stay the same or get better, but not appreciably regress.
At the same time, the pool size check in this script is useless. Writing
to /dev/urandom never credits bits anyway, so no matter what, writing
into /dev/urandom is useful and not harmful. There's also not much of a
point in seeding with more than 256 bits, which is what the hashing
operation above produces. So this commit removes the file size check.
As a final note, while this commit improves upon the status quo by
removing a vulnerability, this shell script still does not actually
initialize the RNG like it says it does. For initialization via a seed
file, the RNDADDENTROPY ioctl must be used but there's currently no way
to do that from a shell script for now.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog: https://curl.se/changes.html
Updated license hash due to copyright year bump:
0409192b1f
The NSS crypto backend requires a special option now, without it
configure errors out with:
configure: error: NSS use must be confirmed using --with-nss-deprecated. NSS support will be dropped from curl in August 2022. See docs/DEPRECATE.md
Since it will be removed entirely soon anyway, and since this version
doesn't fix any CVEs so doesn't need to be backported to stable
branches, drop the NSS option entirely.
Since NSS is going to be removed soon, drop the --without-nss as well.
It is never going to be enabled automatically.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: drop NSS option entirely, as suggested by Baruch Siach.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix CVE-2022-21716: Twisted is an event-based framework for internet
applications, supporting Python 3.6+. Prior to 22.2.0, Twisted SSH
client and server implement is able to accept an infinite amount of data
for the peer's SSH version identifier. This ends up with a buffer using
all the available memory. The attach is a simple as `nc -rv localhost 22
< /dev/zero`. A patch is available in version 22.2.0. There are
currently no known workarounds.
https://github.com/twisted/twisted/releases/tag/twisted-22.2.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix CVE-2022-26495: In nbd-server in nbd before 3.24, there is an
integer overflow with a resultant heap-based buffer overflow. A value of
0xffffffff in the name length field will cause a zero-sized buffer to be
allocated for the name, resulting in a write to a dangling pointer. This
issue exists for the NBD_OPT_INFO, NBD_OPT_GO, and NBD_OPT_EXPORT_NAME
messages.
Fix CVE-2022-26496: In nbd-server in nbd before 3.24, there is a
stack-based buffer overflow. An attacker can cause a buffer overflow in
the parsing of the name field by sending a crafted NBD_OPT_INFO or
NBD_OPT_GO message with an large value as the length of the name.
https://github.com/NetworkBlockDevice/nbd/compare/nbd-3.21...nbd-3.24
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
reintroduction of the package in commit
16ff948444:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arc-buildroot-linux-uclibc/10.2.0/../../../../arc-buildroot-linux-uclibc/bin/ld: common/.libs/libolacommon.so: undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/4362b20d786a0f44268ec32a689c23ac6d3b71c6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As explained in the previous commit, AUTORECONF is necessary to handle a
build failure. Add a comment to make sure it doesn't get removed again
in the future.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This reverts commit 66d348ae18 because
for an unknown reason, the build fails if autoreconf is dropped:
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: warning: libolauartdmx.so.0, needed by olad/.libs/libolaserver.so, not found (try using -rpath or -rpath-link)
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: warning: libolaserverplugininterface.so.0, needed by olad/.libs/libolaserver.so, not found (try using -rpath or -rpath-link)
Fixes:
- http://autobuild.buildroot.org/results/f8164c69da0b9fa38081e8b785d8234f0f297ae1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit drop patches, as they are now included upstream or no longer
needed. It also introduces a new patch to fix a build failure for nios2.
MySQL include and library paths can now be provided in variables passed
to the build command. Variables MYSQL_{INC,LIB}DIR are renamed to
POCO_MYSQL_{INCLUDE,LIB}. For PostgreSQL support, variables
POCO_PGSQL_{INCLUDE,LIB} are also passed the same way to the build
command.
This poco version 1.11.1 introduces a new ActiveRecord component.
For changelog, see:
https://raw.githubusercontent.com/pocoproject/poco/poco-1.11.1-release/CHANGELOG
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
PostgreSQL support was introduced in poco v1.10.0, in commit:
8cec8f6451
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit reorders dependencies and Kconfig package options
alphabetically for better maintainability.
This commit does not change anything else.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Retrieve official tarball
- Fix CVE-2021-45769: A NULL pointer dereference in
AcseConnection_parseMessage at src/mms/iso_acse/acse.c of libiec61850
v1.5.0 can lead to a segmentation fault or application crash.
- Fix many other vulnerabilities:
https://libiec61850.com/new-release-1-5-1-of-libiec61850
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openssl is mandatory since bump to version 9.16.26 in commit
8adeaec8af so move openssl variables in
the beginning of bind.mk instead of keeping them in the middle of the
file. Moreover, drop "BIND_DEPENDENCIES += host-pkgconf zlib" as
host-pkgconf is already mandatory
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with musl and headers >= 5.15 raised
since bump to version 1.0.9 in commit
9af9dfa543:
In file included from /home/buildroot/autobuild/instance-3/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/include/arpa/inet.h:9,
from ../../include/internal/internal.h:14,
from proto.c:2:
/home/buildroot/autobuild/instance-3/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/include/netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/19931aba8bee8867a53130ca4a53cfadbc4c5bfd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patch wich is included in the new version.
Also recreate config.xml by building and running Gerbera using:
```
~/buildroot/output/target/usr/bin/gerbera --create-config > package/gerbera/config.xml
```
Note, that Gerbera sets the `<home>` parameter to the runtime user's home by
default when generating the script. This is not appropriate when running Gerbera
on an embedded Linux system as we usually do not have multiple users or even
users at all. Therefore, we set the home directory to /var/lib/gerbera`.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
host-odb installs the ODB compiler, which when executed at runtime,
needs access to the libodb headers. This is a runtime dependency,
normally added in Config.in, but for host packages there is no way to
express a runtime dependency. In order to have them installed, add a
dependency on host-libodb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Kamel: Add optional host-libodb-boost dependency]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add host variant of libodb-boost required by the ODB compiler.
The libodb-boost headers are needed at compile time, and
therefore installed in $(HOST_DIR).
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Arnout: add -std=c++11]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds support for a new type of graph, showing the timeline
of a build. It shows, with one line per package, when each of this
package steps started/ended, and therefore allows to see the
sequencing of the package builds.
For a fully serialized build like we have today, this is not super
useful (except to show that everything is serialized), but it becomes
much more useful in the context of top-level parallel build.
We chose to order the graph by the time-of-configure, as it is the
closest to the actual cascade-style of a true dependency graph, which is
tiny bit more complex to achieve properly. The actual result still looks
pretty good.
The graph-build make target is extended to also generate this new
timeline graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- sort by start-of-configure time
- re-use existing colorsets (default or alternate)
- fix python2isms
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Virtual packages are not added to the _RDEPENDENCIES list of packages
that they depend on (i.e. their provider).
This causes <provider>-show-rdepends to not show the virtual package
and <provider>-show-recursive-rdepends to miss all the packages that
transitively depend on <provider> via the virtual package.
The virtual make targets (e.g. <pkg>-show-info) are also not marked as
phony for virtual packages.
To fix those issues, remove most of the special handling of virtual
packages in pkg-generic by making $($($(1)_KCONFIG_VAR))=y for them as
well.
This also allows removal of some duplicated code in pkg-generic.mk and a
now unneeded special condition in CHECK_ONE_DEPENDENCY.
Still keep the virtual package out of PACKAGES since there is e.g. no
need to rsync per-package target dir to global target dir. I am not
aware of any showstoppers preventing addition to PACKAGES as well,
though, so it is probably just an optimization.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A malformed input file can lead to a segfault due to an out of bounds
array access in raptor_xml_writer_start_element_common.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update hash of src/v3.cpp, update in year and "Frank Fock" added:
- _## SNMP++ v3.3
+ _## SNMP++ v3.4
- _## Copyright (c) 2001-2013 Jochen Katz, Frank Fock
+ _## Copyright (c) 2001-2021 Jochen Katz, Frank Fock
- _## Hewlett-Packard and Jochen Katz make no representations about the
- _## suitability of this software for any purpose. It is provided
+ _## Hewlett-Packard, Frank Fock, and Jochen Katz make no representations
+ _## about the suitability of this software for any purpose. It is provided
https://www.agentpp.com/download/changes_snmp++v3.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2022-24128: Timescale TimescaleDB 1.x and 2.x before 2.5.2 may
allow privilege escalation during extension installation. The
installation process uses commands such as CREATE x IF NOT EXIST that
allow an unprivileged user to precreate objects. These objects will be
used by the installer (which executes as Superuser), leading to
privilege escalation. In order to be able to take advantage of this, an
unprivileged user would need to be able to create objects in a database
and then get a Superuser to install TimescaleDB into their database. (In
the fixed versions, the installation aborts when it finds that an object
already exists.)
"This release contains bug fixes since the 2.5.1 release.
This release is high priority for upgrade. We strongly recommend that
you upgrade as soon as possible."
https://github.com/timescale/timescaledb/releases/tag/2.5.2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without gl raised since bump to version
6.03 in commit cbcbd66b0f:
Note: The OpenGL 3D library is not being used.
Those demos which use 3D will not be built or installed.
That is most of them.
make: *** [package/pkg-generic.mk:282: /home/peko/autobuild/instance-0/output-1/build/xscreensaver-6.03/.stamp_configured] Error 1
A patch was sent to Jamie Zawinski to fix this failure and he replied:
"Why would you do that? I pretty much consider that an unsupported
configuration, since that's more than half of the savers at this point."
I told him that some embedded devices don't have gl and he replied:
"Such as? Just about every modern "embedded device" I'm aware of is more
performant than the desktop computers on which I developed many of those
GL hacks..."
So just add a dependency on gl.
Fixes:
- http://autobuild.buildroot.org/results/b76743a48d75b5b7539712318fa0b2937a157f88
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: keep --with-gl=yes]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump OP-TEE OS package version to OP-TEE release 3.16.0 and set
BR2_TARGET_OPTEE_OS_LATEST to select
BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY since
python-cryptography is now needed to build optee-os.
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Newer version of optee-os (>= 3.16) uses python-cryptography instead of
python-pycryptodomex in python scripts. Add support to build these
newer versions by adding a new
BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY option which will
select host-python-cryptography dependency when building optee-os.
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[yann.morin.1998@free.fr:
- move the _ARCH_DEPENDS option from the main symbol to thus new
symbol
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It seems reasonable to expect that the download of the host and target
variants should usually be exactly the same and thus reuse the target
package values for the host package. This commits add support to
inherit host _DL_SUBDIR, _DOWNLOAD_DEPENDENCIES, _DL_ENV and
_DOwNLOAD_POST_PROCESS variables from target ones. These variables can
still be overriden if necessary for the host package.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A DNS rebinding issue in ReadyMedia (formerly MiniDLNA) before 1.3.1
allows a remote web server to exfiltrate media files.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An Off-by-one Error occurs in cmr113_decode of rtl_433 21.12 when
decoding a crafted file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An out of bounds read was found in Wavpack 5.4.0 in processing *.WAV
files. This issue triggered in function WavpackPackSamples of file
src/pack_utils.c, tainted variable cnt is too large, that makes pointer
sptr read beyond heap bound.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This has been like tht for ages (probably an implicit dependency check
in older versions), but now wget has explicit flags, so let's use them.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: expand commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The check_package_get_latest_version_by_distro() function analyzes the
data returned by release-monitoring.org. For two of our
packages (bento4 and qextserialport), release-monitoring.org returns
something that is a bit odd: it returns an entry with a
"stable_versions" field that contains an empty array. Our code was
ready to have or not have a "stable_versions" entry, but when it is
present, we assumed it was not an empty array. These two packages, for
some reason, break this assumption.
In order to solve this problem, this commit is more careful, and uses
the stable_versions field only if it exists and it has at least one
entry. The code is also reworked as a sequence of "if...elif...else"
to be more readable.
This fixes the following exception when running pkg-stats on the full
package set:
Task exception was never retrieved
future: <Task finished name='Task-10772' coro=<check_package_latest_version_get() done, defined at ./support/scripts/pkg-stats:532> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "./support/scripts/pkg-stats", line 535, in check_package_latest_version_get
if await check_package_get_latest_version_by_distro(session, pkg):
File "./support/scripts/pkg-stats", line 489, in check_package_get_latest_version_by_distro
version = data['stable_versions'][0] if 'stable_versions' in data else data['version'] if 'version' in data else None
IndexError: list index out of range
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: non-sequence tests as True]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
alsa-lib is optional, not mandatory, since the addition of the package
in commit 18a8630637
Moreover, alsa support depends on BR2_PACKAGE_ALSA_LIB_SEQ (otherwise,
it is silently disabled)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 18a8630637:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-musl/10.3.0/../../../../riscv64-buildroot-linux-musl/bin/ld: libzynaddsubfx_core.a(Master.cpp.o): in function `.L1880':
Master.cpp:(.text+0x7cc0): undefined reference to `__atomic_exchange_1'
Fixes:
- http://autobuild.buildroot.org/results/91b5959ca0eb136c1609462e71d109ff09cca5e5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following musl build failure raised since bump to version 1.10.0
in commit d96b9ed073:
In file included from ./jitterentropy.h:98,
from ./jitterentropy-base.c:32,
from ./rndjent.c:88:
./jitterentropy-base-user.h: In function 'jent_get_cachesize':
./jitterentropy-base-user.h:191:8: warning: implicit declaration of function 'open'; did you mean 'popen'? [-Wimplicit-function-declaration]
191 | fd = open(file, O_RDONLY);
| ^~~~
| popen
./jitterentropy-base-user.h:191:19: error: 'O_RDONLY' undeclared (first use in this function)
191 | fd = open(file, O_RDONLY);
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/f6182fca6a4e2ba29a89f770f17df691d7861f8d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changes between 1.1.1m and 1.1.1n [15 Mar 2022]
*) Fixed a bug in the BN_mod_sqrt() function that can cause it to loop forever
for non-prime moduli.
Internally this function is used when parsing certificates that contain
elliptic curve public keys in compressed form or explicit elliptic curve
parameters with a base point encoded in compressed form.
It is possible to trigger the infinite loop by crafting a certificate that
has invalid explicit curve parameters.
Since certificate parsing happens prior to verification of the certificate
signature, any process that parses an externally supplied certificate may
thus be subject to a denial of service attack. The infinite loop can also
be reached when parsing crafted private keys as they can contain explicit
elliptic curve parameters.
Thus vulnerable situations include:
- TLS clients consuming server certificates
- TLS servers consuming client certificates
- Hosting providers taking certificates or private keys from customers
- Certificate authorities parsing certification requests from subscribers
- Anything else which parses ASN.1 elliptic curve parameters
Also any other applications that use the BN_mod_sqrt() where the attacker
can control the parameter values are vulnerable to this DoS issue.
(CVE-2022-0778)
[Tomáš Mráz]
*) Add ciphersuites based on DHE_PSK (RFC 4279) and ECDHE_PSK (RFC 5489)
to the list of ciphersuites providing Perfect Forward Secrecy as
required by SECLEVEL >= 3.
[Dmitry Belyavskiy, Nicola Tuveri]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In the list of full distribution, the FAQ contains a link to Emdebian.
This project stopped receiving updates in 2014 and the main web page does not exist anymore.
This replace the entry with a link to the Debian ports page.
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds support of ARC architecture in Qt's JS core and Webkit.
The change itself is quite straight-forward:
1. Enable JS core for ARC
2. Make sure so-called "large memory model" is used,
i.e. relocations with long jumps are being generated for global
symbols, as otherwise insanely huge libqt5webkit.so fails to link
because some symbols might be more than 32 MiB away from each other.
3. Make the original WebKit build system aware of yet another CPU
architecture with explicitly disabled JIT in JS core for ARC.
Obviously, this one depends on [1].
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20220221140628.2295-1-abrodkin@synopsys.com/
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop -DHAVE_DNSSEC_STATIC which has been added by commit
e913527b94 but is not needed and raises
the following static build failure because dnsmasq will wrongly append
"-Wl,-Bstatic -lgmp -Wl,-Bdynamic":
/home/buildroot/autobuild/instance-2/output-1/host/bin/x86_64-linux-gcc -static -o dnsmasq cache.o rfc1035.o util.o option.o forward.o network.o dnsmasq.o dhcp.o lease.o rfc2131.o netlink.o dbus.o bpf.o helper.o tftp.o log.o conntrack.o dhcp6.o rfc3315.o dhcp-common.o outpacket.o radv.o slaac.o auth.o ipset.o pattern.o domain.o dnssec.o blockdata.o tables.o loop.o inotify.o poll.o rrfilter.o edns0.o arp.o crypto.o dump.o ubus.o metrics.o hash-questions.o domain-match.o -Wl,-Bstatic -L/home/buildroot/autobuild/instance-2/output-1/host/bin/../x86_64-buildroot-linux-musl/sysroot/usr/lib -lhogweed -lgmp -lnettle -Wl,-Bdynamic -Wl,-Bstatic -lgmp -Wl,-Bdynamic
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: attempted static link of dynamic object `/home/buildroot/autobuild/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/lib/../lib64/libc.so'
Strangely enough, this is the first time this build failure is raised by
the autobuilders whereas "-Wl,-Bdynamic" is set since a very long time:
https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=c979fa04a40ff12370c8d3a82ad27d9d3b5907e3
Fixes:
- http://autobuild.buildroot.org/results/99b419ddb5a3be561d39e715833510a59519213e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libfcgi raises the following build failure with glibc 2.34 and gcc
11.2.0:
In file included from /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/features.h:488,
from /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/stdio.h:27,
from /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/fcgi_stdio.h:18,
from boinc_fcgi.h:19,
from coproc.cpp:22:
/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/wchar.h:582:24: error: 'malloc' attribute argument 1 is ambiguous
582 | __attribute_malloc__ __attr_dealloc_fclose;
| ^~~~~~~~~~~~~~~~~~~~~
RawTherapee has the same kind of issue:
- https://github.com/Beep6581/RawTherapee/issues/6324
- https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101747
Fixes:
- http://autobuild.buildroot.org/results/232dae62570ed7927a10864d83dccaf9b6214500
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since gcr selects gnupg2, it's incompatible with gnupg. Add this
dependency and corresponding comment.
While we're at it, also hide the existing comment when
!BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch reverses the logic to select gnupg2 by default, while still
allowing to select gnupg (v1).
Quoting: https://gnupg.org/download/index.html
"""
GnuPG 1.4 is the old, single binary version which still support the
unsafe PGP-2 keys. This branch has no dependencies on the above listed
libraries or the Pinentry. However, it lacks many modern features and
will receive only important updates.
"""
gnupg 1.4 is kept in Buildroot for now, as the package is still
maintained upstream. It might still be useful is some specific cases:
- it has a smaller footprint (compared to v2),
- it has less dependencies (only zlib),
- it has less build dependencies (can build static, no need for
MMU/threads, ...)
Most Linux distributions are now shipping gnupg2 by default. gnupg v1
is now more for legacy/compatibility/specific cases.
There is currently only two packages selecting gnupg in Buildroot:
gpgme and python-gnupg
This commit also reverses the logic for those packages. However, this
means we also need to propagate the dependencies of gnupg2, and still
select gnupg if those dependencies are not met. To simplify this, add a
blind option BR2_PACKAGE_GNUPG2_DEPENDS. Note that due to the
intricacies of Kconfig dependencies, "depends on !BR2_PACKAGE_GNUPG"
must *not* be part of BR2_PACKAGE_GNUPG2_DEPENDS.
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Arnout: rework dependency handling to make sure gnupg2 dependencies are
properly propagated]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Just like aarch64, aarch64 BE supports the Image and Image.gz format.
Signed-off-by: Rémi Duraffort <remi.duraffort@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes TXEN on CPU UARTs not correctly asserting in some multi-byte
transmits.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds two extra commands to install dbus policy config
to target if dbus option is enabled.
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
boost is not mandatory since the deactivation of tests when bumping to
version 0.2.0 in commit d8e2876104 and
1844241d2a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Version 0.6.0 introduced a Meson build system, and upstream seems to
have the intention to abandon the previous autotools based one. Switch
to Meson for future proofing.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
netsnmp support needs mib to avoid the following build failure raised
since the addition of the package in commit
42382a1712:
checks_snmp.c: In function ‘zbx_snmp_get_octet_string’:
checks_snmp.c:694:35: error: invalid use of undefined type ‘struct tree’
694 | hint = (NULL != subtree ? subtree->hint : NULL);
| ^~
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ../../build/lib/libvcos.so: undefined reference to `backtrace_symbols'
Fixes:
- http://autobuild.buildroot.org/results/93d3b8cc2ac5dfa9d4b44946c0b4d8171e8f52a1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Without musl-root in config.toml the build stop with the following error:
thread 'main' panicked at 'couldn't find libc.a in musl libdir: output/host/arm-buildroot-linux-musleabihf/sysroot/lib/lib', src/bootstrap/sanity.rs:192:25
musl-root is needed to provide the path to libc.a and libunwind.a because
rust link them statically into the standard library and liblibc [1].
For other libc, musl-root is not used and ignored [2].
[1] cd980b3bee
[2] https://github.com/rust-lang/rust/blob/1.58.1/src/bootstrap/sanity.rs#L181
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
bpftool uses its own local copy of libbpf so add
BR2_PACKAGE_BPFTOOL_ARCH_SUPPORTS to avoid the following build failure
on ARM:
btf.c: In function 'btf_type_by_id':
btf.c:461:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (type_id < btf->start_id)
^
bpf.c:62:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^
Fixes:
- http://autobuild.buildroot.org/results/aae772f1cfb16516a57f310c4f022e80a2a8d65e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The test TestRust is currently broken with ripgrep package with
the following error:
error[E0514]: found crate `core` compiled by an incompatible version of rustc
|
= help: please recompile that crate using this compiler (rustc 1.58.1) (consider running `cargo clean` first)
= note: the following crate versions were found:
crate `core` compiled by rustc 1.58.1 (db9d1b20b 2022-01-20): TestRust/host/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcore-6cfcec236d576603.rlib
error[E0514]: found crate `std` compiled by an incompatible version of rustc
The problem is not really a cross-compilation issue (we are building
for an armv7 target on x86_64 host) but a problem with rust-std libraries
(rlib).
We can notice that "rustc 1.58.1 (db9d1b20b 2022-01-20)" is the same
version as the prebuilt rustc used to bootstrap the build:
TestRust/host/bin/rustc --version
rustc 1.58.1
TestRustBin/host/bin/rustc --version
rustc 1.58.1 (db9d1b20b 2022-01-20)
Indeed we are using host-rust-bin to bootstrap the host-rust compiler
package built by Buildroot. The problem is that the
libcore-6cfcec236d576603.rlib file come from host-rust-bin (rust-std)
and is not removed before installing host-rust built by Buildroot.
We actually spent a lot of time to build host-rust with rust-std
and forget to install this important library HOST_DIR.
Looking at the host-rust build directory we can notice two installer
script "install.sh" (the same scripts used to install host-rust-bin):
TestRust/build/host-rust-1.58.1/build/tmp/tarball/rust/x86_64-unknown-linux-gnu/rust-1.58.1-x86_64-unknown-linux-gnu/install.sh
TestRust/build/host-rust-1.58.1/build/tmp/tarball/rust-std/armv7-unknown-linux-gnueabihf/rust-std-1.58.1-armv7-unknown-linux-gnueabihf/install.sh
The "tarball" directory is generated by the "python x.py dist" during
the install step, we have to keep it.
Replace "python x.py install" by theses two install scripts.
Installing rust-std with the install.sh script replace the rust-std
libraries installed by host-rust-bin.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202544
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Arnout: remove redundant parenthesis; only use a variable for the
common install opts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
TestRust and TestRustBin has been introduced at the time when there was
no cargo package infrastructure or any package using rust compiler
(Buildroot 2018.02).
Since then the ripgrep package has been introduced, initially using
the generic package infrastructure and converted later to the cargo
package infrastructure.
Due a recent change in rust/cargo removing the cargo config file [1]
the test TestRust and TestRustBin now fail to compile since they build
an hello-world crate outside of the cargo package infrastructure
without the correct environment for cross-compiling.
Replace the 'hello-world' crate by ripgrep package and check if it
can run properly in Qemu.
Fixes tests.package.test_rust.TestRustBin:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202545
But doesn't fixes tests.package.test_rust.TestRust due another bug:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202544
[1] b6378631c2
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some packages only have a home page properly set inside project_urls.
Squelch flake8's E127, because a visual indent here is really nicer.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: simplify getting home_page fallbacks]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Migrate to new flit based build.
Since upstream commit cb0248d29ab2 (Extract CFFI bindings into
argon2-cffi-bindings), the dependency to libargon2 is carried by
argon2-cffi-bindings which is already enforced in Buildroot. So drop it
from python-argon2-cffi.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- explain why we drop the dependency to libargon2
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- add upstream patch ([1]) to fix '-fzero-call-used-regs' gcc compiler option
support detection
- add autoreconf as the patch touches m4/openssh.m4
Fixes:
- https://bugs.busybox.net/show_bug.cgi?id=14651
bitmap.c: In function ‘reserve’:
bitmap.c:98:1: sorry, unimplemented: ‘-fzero-call-used-regs’ not supported on this target
98 | }
| ^
[1] f107467179.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add Intel WiFi 22000 series firmware. This firmware supports WiFi 6
models like AX200/AX201/AX210.
Signed-off-by: Stefan Agner <stefan@agner.ch>
[yann.morin.1998@free.fr: fix prompt for consistency with other iwlwifi]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BIND 9.11 EOL in March, 2022. BIND 9.16 is current Stable/ESV version.
Changes:
* libuv (new dependency)
* openssl is now mandatory
* zlib must be detected with PKG_CONFIG_PATH (specifying zlib
installation path is not supported)
* bind9-config and isc-config.sh removed
* updated COPYRIGHT hash
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Licence changes mostly concern vendored dependencies (that buildroot does
not use) and a new bundled PRNG used to reimplement mkstemp() - added
CC0 license for that.
Some buildsystem options also changed:
- THREADSAFE is now USE_THREADS
- BUILD_CLAR is now BUILD_TESTS, which the cmake infra already give.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
NOTICE hash is changed due to a copyright year update.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove 0001-build-add-an-option-to-not-build-man-pages.patch
as release contains very similar commit which does autodetection:
1a474db ("build: add an option to not build man pages")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change repo source to official github.com repository which
is actively maintained. Previous sourceforge.net sources
remained untouched since 2010.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The _PYTHON_HOST_PLATFORM and _PYTHON_PROJECT_BASE variables should
also be set for pep517 builds as they are not setuptools/distutils
specific.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Different shells can have different behaviours when it comes to globbing
patterns. The dash shell (/bin/sh) on Debian testing switched to a
different fnmatch/glob implementation that results in this new behaviour:
Using bash:
$ mkdir /tmp/foo
$ echo /tmp/foo/.[^.]*
/tmp/foo/.[^.]*
Using dash:
$ mkdir /tmp/foo
$ echo /tmp/foo/.[^.]*
/tmp/foo/..
The current FAKEROOT script uses this shell glob pattern which now fails
on recent Debian testing systems:
rm: refusing to remove '.' or '..' directory: skipping '/build/buildroot-fs/cpio/target/run/..'
rm: refusing to remove '.' or '..' directory: skipping '/build/buildroot-fs/cpio/target/tmp/..'
Additionally, the glob will miss files which have at least two leading
dots, like ..foo ...bar or ......buz (highly improbable, but still).
It seems safer to use `find | xargs rm` here instead of relying on shell
globbing patterns.
Signed-off-by: Mathieu Mirmont <mat@parad0x.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
LICENSE hash is update due to change in copyright year.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- remove 001-dpp-fix-implicit-declaration-of-function-explicit_bz.patch
(upstream applied [1])
- Changelog (since 1.21, from [2]):
ver 1.24:
Fix issue with handshake and missing rekeying support.
Fix issue with BSS ranking and zero signal strength.
Fix issue with setting OWE IE length correctly.
ver 1.23:
Fix issue with handling handshake offloading.
Fix issue with at_console and D-Bus policy.
ver 1.22:
Fix issue with handling periodic scanning.
Fix issue with handling scanning completion.
Fix issue with handling scanning for OWE auto-connect.
Add support for additional DPP features.
[1] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=6ce41f621154eff0145dab41308bc145c0440f16
[2] https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
sshd is broken on 32-bit systems because ppoll_time64 is used by the
application although it is not allowed by the seccomp filter.
Apply the upstream patch to fix this.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to extlinux instead of U-Boot boot script. Drop custom boot
script and genimage config. Instead use common orangepi files from
board/orangepi/common. To help extlinux to find DTB without U-Boot
environment changes, do not strip arm64 board specific directory
from DTB name when installing it in /boot directory. For this
purpose use BR2_KERNEL_DTB_KEEP_DIRNAME config option. Finally,
tidy up configuration file adding section names.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Bump Linux to version 5.4.137
- Bump U-Boot to add new targets, version remains the same
- Drop BR2_ROOTFS_OVERLAY and remove S09modload script because it was
only used by PFE and now PFE is loaded directly by the kernel
- Use Image.gz instead of Image to have a compressed kernel
- Rename ucls1012a.its to br2-ucls1012a.its since post-build.sh and
post-image.sh use different name. This fixes the bug that didn't
allow the creation of the part0-000000.itb file.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes:
* Switch to common orangepi scenario for multiple boards (board/orangepi/common) to create an SD image.
* Exclude FAT partition, it is no longer needed for U-Boot.
* Switch SD image from MBR to GPT for partition-uuid to work.
* Switch to extlinux, this is convenient for debugging.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new package provides "lzma_alone" host binary based on the original
LZMA SDK. It provides few extra options when compared to the LZMA Utils
/ XZ Utils project "lzma" binary (already packaged as the "lzma").
This packaging schema (LZMA SDK with lzma -> lzma_alone rename) follows
Debian's solution. Please note that Debian also uses LZMA SDK for the
base "lzma" tool which may be considered for Buildroot too - as an
independent change. Similar packaging is also used by Ubuntu & Arch.
lzma_alone is a requirement for preparing firmware images for some
Broadcom based home routers with a picky CFE bootloader. It has limited
LZMA support and building compatible images requires specifying
dictionary size and lc/lp/pb LZMA values manually.
Version 9.22 is used as it's the last release using .tar.bz2 format. The
same version is used by Debian.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[yann.morin.1998@free.fr:
- add the upstream sha1, add comments
- fix license
- add license file and its sha256
- fix coding styles
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
OLA_AUTORECONF has been set since re-introduction of package in commit
16ff948444 but it is not needed as no
patches are touching Makefile.am or ola.m4 anymore
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Technologic Systems has rebranded as embeddedTS with the current
domain eventually going offline. Update web/doc URLs to correct
resource locations.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default currently is to rely on the package name to decide what to
build and install if not specified by the caller. This works nice for
target packages, where a 'foo' package will by default build and
install a 'foo' executable.
However, for host packages, that will build and install a 'host-foo'
exzcutable, which is not really, even really not, what would be
expected.
We fix that by using the package raw name, i.e. the package name with
the host- prefix yanked away.
It is very improbable that there already are many host-golang packages in
the wild (in br2-external trees), but if there are, they would forcibly
define those variables to a sane value. This change is not incompatible, as
the values provided by packages take precedence; it's just that those
packages now carry superfluous, if innocuous, variable assignments.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop custom install rules which were added since commit
676797d57f. Indeed, they result in a
broken installation. Especially, they are trying to "guess" what must
be installed based on BR2_ARCH but oprofile has its own logic. For
example, goldmont microarchitecture files must be installed in i386
directory even if this architecture is 64 bits:
0ad5a9e6af
This will result in the following runtime failure:
oprofile: could not open unit mask description file /usr/share/oprofile//i386/goldmont/unit_masks
Unable to find info for event cpu_clk_unhalted
Fixes:
- https://bugs.buildroot.org/show_bug.cgi?id=14641
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6e33e59080.
This unfortunately breaks a number of packages, as glibc errors out if 64bit
time_t is used without 64bit file offsets, and some packages undefine
_FILE_OFFSET_BITS leading to build breakage:
# if ! defined (_FILE_OFFSET_BITS) || _FILE_OFFSET_BITS != 64
# error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
..
So revert it for 2022.02.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
check-package now gives a warning about this. It's not a problem at the
moment, but it's a risk if an unconditional setting of _CONF_OPTS is
done earlier in the file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As already done for {FOO}_DEPENDENCIES in commit
4910a175b3, check that {FOO}_CONF_OPTS are
never overridden in a conditional
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When enabling MariaDB (BR2_PACKAGE_MARIADB=y) and systemd
(BR2_INIT_SYSTEMD=y) in buildroot, the mysqld.service fail to start
with a permission error. See output of command:
journalctl --unit=mysqld
Which shows:
systemd[1]: Starting MySQL database server...
install[102]: install: can't create directory '/var/log/mysql': Permission denied
systemd[1]: mysqld.service: Control process exited, code=exited, status=1/FAILURE
Since the service file includes the "User=mysql" directive, the
"ExecStartPre=" is executed as this user, which does not have
permission to create a directory in "/var/log".
This commit fixes this issue by adding the "!" prefix, which will
execute the command with full privileges. See the systemd.service manual
page entry for "ExecStart=", table "Special executable prefixes":
https://www.freedesktop.org/software/systemd/man/systemd.service.html#ExecStart=
or https://github.com/systemd/systemd/blob/v250/man/systemd.service.xml#L339
Moreover, the "mysql_install_db" invocation does not need this special
prefix, as the "/var/lib/mysql" directory on target is already owned
by the "mysql" user. The "chown" command is also useless and is
removed in this commit.
Reported-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Tested-By: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without threads raised since the
addition of the package in commit
0d4c8ce8a2:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: cannot find -lpthread
Fixes:
- http://autobuild.buildroot.org/results/170d0114987b39a2b9ea173df7a5e806bd270fd8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Even with the two upstream patches added in commit
b2e6e376a2, python-pycli still raises the
following build failure since bump of python3 to version 3.10.1 in
commit 25b1fc2898 due to the new "Multiple
Exception types without parentheses" exception
(https://docs.python.org/3/whatsnew/3.10.html):
error: File "/usr/lib/python3.10/site-packages/cli/test.py", line 142
except raises, e:
^^^^^^^^^
SyntaxError: multiple exception types must be parenthesized
So drop the package as the last release was made 10 years ago.
Fixes:
- http://autobuild.buildroot.org/results/6112e1830ce608abcea4a26b659c10e5ff09a66a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a minor release which fixes a couple of crashes and an incorrect
case of TLS certificate velidation when built with the OpenSSL backend.
Release notes:
b0d45b17f7/NEWS
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-treq needs TLS support in twisted so select
BR2_PACKAGE_PYTHON_TWISTED_TLS moreover it doesn't depend directly on
service_identity and pyOpenSSL since version 17.3.0 and
ef2ac7ea2b
Finally, python-idna was never a direct dependency of python-treq
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gdb's AC_LIB_HAVE_LINKFLAGS macro hardcodes a search starting with
/usr/lib/ which can lead to libgmp from the wrong architecture with the
result that the test fails. Even if a libgmp is found there it is now
the one that should be used.
This is the same macro used for expat and lzma for which there are
already specific CONF_OPTS flags added here. Add the same flag for
libgmp and move the handling down so that it is logically grouped with
the other similar options.
Note that there is no --with(out)-gmp flag to configure, as the
dependency is mandatory, so only the --with-libgmp-prefix option is
specified.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For an unknown reason, installation of headers is broken since commit
7c1bb5c2bf which sets _PYTHON_PROJECT_BASE
As _PYTHON_PROJECT_BASE value seems correct and fix its own build
failures, use --install-headers to set install path for headers and
avoid the following build failure with python-greenlet or python-pygame:
python-greenlet: installs files in /home/peko/autobuild/instance-0/output-1/target//home/peko/autobuild/instance-0/output-1
python-pygame: installs files in /home/peko/autobuild/instance-1/output-1/target//home/peko/autobuild/instance-1/output-1
Fixes:
- http://autobuild.buildroot.org/results/f5b52dee7e72f0a1f72b9f87723bc585743c7b31
- http://autobuild.buildroot.org/results/9eb2685d32756864000e1b38f8a183b57f6ea528
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This bump will fix the following build failure of kf5-kcoreaddons with
python 3.10 raised since commit
25b1fc2898:
CMake Error at /home/giuliobenetti/autobuild/run/instance-1/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/share/ECM/find-modules/FindPythonModuleGeneration.cmake:149 (message):
The max python version in PythonModuleGeneration must be updated.
Call Stack (most recent call first):
src/lib/CMakeLists.txt:208 (find_package)
It will also fix the following build failure of kf5-kcoreaddons raised
since commit 5770a645a3:
In file included from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/qt5/QtCore/qchar.h:43,
from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/qt5/QtCore/qstring.h:49,
from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/qt5/QtCore/QString:1,
from /home/peko/autobuild/instance-0/output-1/build/kf5-kcoreaddons-5.47.0/src/lib/randomness/krandom.h:27,
from /home/peko/autobuild/instance-0/output-1/build/kf5-kcoreaddons-5.47.0/src/lib/randomness/krandom.cpp:22:
/home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/qt5/QtCore/qglobal.h:1274:80: note: declared here
1274 | Q_CORE_EXPORT QT_DEPRECATED_VERSION_X_5_15("use QRandomGenerator instead") int qrand();
| ^~~~~
/home/peko/autobuild/instance-0/output-1/build/kf5-kcoreaddons-5.47.0/src/lib/randomness/krandom.cpp: In function 'QString KRandom::randomString(int)':
/home/peko/autobuild/instance-0/output-1/build/kf5-kcoreaddons-5.47.0/src/lib/randomness/krandom.cpp:76:27: error: use of deleted function 'QCharRef& QCharRef::operator=(char)'
76 | str[i++] = char(r);
| ^
- Update indentation in hash file (two spaces)
- Update licenses due to
93480398b58ad494d957fa9ef0d848
Fixes:
- http://autobuild.buildroot.org/results/0267ff54ee82d853476ff7d6b14edb4aba308aa2
- http://autobuild.buildroot.org/results/694a2322d9161b55f5db66d1ace57d836360ed84
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python3 is an optional dependency since the addition of the package in
commit bf48bf8629
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Makefiles hostapd.mk and wpa_supplicant.mk define different macros for
different defconfig options. Options that are not listed in defconfig,
can be set using CONFIG_SET. Options that are listed in defconfig, can
be enabled or disabled using CONFIG_ENABLE or CONFIG_DISABLE. Starting
from hostapd v2.10, option CONFIG_DPP is explicitly listed in defconfig.
So it would be time to switch to enable/disable macros for this option.
On the other hand, this approach looks fragile: we have to track
'promoted' defconfig options for each hostapd/wpa_s update. This patch
removes CONFIG_SET macros, keeping only CONFIG_ENABLED/CONFIG_DISABLED.
CONFIG_SET is replaced by the additional pass over enabled options. All
such options that are not listed in defconfig, will be appended to the
configuration file.
Fixes:
- http://autobuild.buildroot.net/results/3f8058ee6f3913fda795578f206db895731ba1e6/
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Build with per-package directory is broken, because go is not found in
the PATH, when trying to download and vendor a go package.
This is because FOO_DL_ENV contains $(HOST_GO_COMMON_ENV), which defines
the PATH as PATH=$(BR_PATH). This is correct, except this is expanded at
the time the golang-package macro is evaluated, which means PATH
contains the 'global' BR_PATH, i.e.: $(O)/host/bin:$(O)/host/sbin:...
However, with PPD, this does not yet exist at build time; only the
per-package host directory exists.
We want to have it expanded at the time the recipe is run, so like all
other variables, we need to $$-expand it.
At the same time, also $$-expand two other variables (even though those
are benign, it is better for consistency that they be $$-expanded).
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Anisse Astier <anisse@astier.eu>
Cc: Christian Stewart <christian@paral.in>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, host-go is a download dependency, because we need go for the
vendoring during the download step.
However, when using a package in override-srcdir, there is no download
step, so host-go is not pulled in as a dependency, which will break the
build of a single package from scratch.
We fix that by adding host-go as a standard dependency too.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Christian Stewart <christian@paral.in>
Cc: Anisse Astier <anisse@astier.eu>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the golang infrastructure forcibly sets the package _DL_ENV
variable, instead of appending to it, which prevents packages from
providing their own download environment variables.
We fix that by using an append-assignment.
Note: when introduced, that variable was explicitly not documented, and
is supposed to only be used by packages infrastructures. However, that
variable exists, and it can be (ab)used by br2-external packages (most
probably to ill effects, but heh!). We anyway leave it undocumented,
like _ROOTFS_PRE_CMD_HOOKS.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Christian Stewart <christian@paral.in>
Cc: Anisse Astier <anisse@astier.eu>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, host-rustc is a download dependency, because we need cargo
for the vendoring during the download step.
However, when using a package in override-srcdir, there is no download
step, so host-rustc is not pulled in as a dependency which breaks
running the build of a single package from scratch:
$ make clean
$ make my-rust-package
[...]
[...] cargo build --offline --release --manifest-path Cargo.toml --locked
/bin/sh: cargo: command not found
We fix that by adding host-rustc as a standard dependency too.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages have their rust sources as a sub-directory, rather
than at the root of the source tree.
Do like we do for autotools-package, and use the package's _SRCDIR
rather than the top-level directory $(@D).
Additionally, in such a situation, it is more than probable that
the Cargo.toml is also present in that sub-directory, so use that
when vendoring the package.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the cargo infrastructure forcibly sets the package _DL_ENV
variable, instead of appending to it, which prevents packages from
providing their own download environment variables.
We fix that by using an append-assignment.
Note: when introduced, that variable was explicitly not documented, and
is supposed to only be used by packages infrastructures. However, that
variable exists, and it can be (ab)used by br2-external packages (most
probably to ill effects, but heh!). We anyway leave it undocumented,
like _ROOTFS_PRE_CMD_HOOKS.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using uboot's legacy build system, the 'make uboot-menuconfig'
and 'make uboot-savedefconfig' targets are not available as they
are created by 'kconfig-package'.
Signed-off-by: Simon Doppler <dopsi@dopsi.ch>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc <= 5 raised since bump to
version 2022-02-01 in commit d2cf91e0c6
and
a022cc0c55
./re2/sparse_array.h:266:37: warning: defaulted and deleted functions only available with -std=c++11 or -std=gnu++11
SparseArray<Value>::SparseArray() = default;
^
./re2/sparse_array.h: In copy constructor 're2::SparseArray<Value>::SparseArray(const re2::SparseArray<Value>&)':
./re2/sparse_array.h:273:3: error: 'copy_n' is not a member of 'std'
std::copy_n(src.sparse_.data(), src.max_size(), sparse_.data());
^
Fixes:
- http://autobuild.buildroot.org/results/8ebbac67f32fe24416a1f72aad0afd42b567b403
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
# ipython -c 'import math; math.floor(12.3)'
-sh: ipython: not found
ipython use a wrong shebang on the target:
# head -n 1 /usr/bin/ipython
#!/home/kubu/buildroot/testsuite-master/TestIPythonPy3/host/bin/python
The issue come from python3-setuptools 60.0.0 that changed
SETUPTOOLS_USE_DISTUTILS default value from stdlib to local [1] to use
its local copy of distutils. This is actually a "breaking" change [2].
We have to override SETUPTOOLS_USE_DISTUTILS to the previous value
"stdlib" to fixes the issue.
While at it, use distutils from stdlib for the host.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2088684091
[1] b6fcbbd00c
[2] https://github.com/pypa/setuptools/blob/v60.0.0/CHANGES.rst#breaking-changes
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Link with -latomic if needed to avoid the following build failure raised
since the addition of the package in commit
7227d005d2:
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: CMakeFiles/libcamera-still.dir/libcamera_still.cpp.o: undefined reference to symbol '__atomic_fetch_sub_4@@LIBATOMIC_1.0'
Fixes:
- http://autobuild.buildroot.org/results/b20465140f3a5281f9b586f442b67fd400e7184a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Links were aimed at the methods.co.nz domain, which is now returning
404s. The current situation of AsciiDoc is unclear to me: the Fedora
package points to this website, they own asciidoc.org, Wikipedia points
to this project as well but their Git repo's README includes the
following paragraph:
> AsciiDoc.py is a legacy processor for this syntax, handling an older
> rendition of AsciiDoc. As such, this will not properly handle the
> current AsciiDoc specification. It is suggested that unless you
> specifically require the AsciiDoc.py toolchain, you should find a
> processor that handles the modern AsciiDoc syntax.
https://github.com/asciidoc-py/asciidoc-py/blob/10.1.3/README.md
"AsciiDoc specification" pointing towards:
https://projects.eclipse.org/projects/asciidoc.asciidoc-lang
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The systemd service will try to call rauc in service mode, so it is useless
and will fail if rauc does not have such support
Signed-off-by: Nuno Gonçalves <nunojpg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure on rtorrent raised on uclibc and musl
since the addition of libexecinfo package in commit
eea8ba446c:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib/libtorrent.so: undefined reference to `backtrace_symbols'
Fixes:
- http://autobuild.buildroot.org/results/6cb4ba56fc0a3a8bd02b246ab9bc82edaa552ad9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream commit to fix build with xorg-server 21.1 which was bumped
with commit d9185c6ba3.
No autobuild errors found yet.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream commit to fix build with xorg-server 21.1 which was bumped
with commit d9185c6ba3.
No autobuild errors found yet.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix CVE-2021-30560
- remove merged patch, drop autoreconf
- moved from xmlsoft.org to gnome.org
- spaces in hash file
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr:
- drop autoreconf as no longer patching
- also switch home in Config.in
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 5770a645a3 wrongly removed riscv32
patch resulting in the following build failure:
In file included from thread/qmutex_linux.cpp:45,
from thread/qmutex.cpp:806:
thread/qfutex_p.h: In function 'int QtLinuxFutex::_q_futex(int*, int, int, quintptr, int*, int)':
thread/qfutex_p.h:116:30: error: '__NR_futex' was not declared in this scope; did you mean '_q_futex'?
116 | int result = syscall(__NR_futex, addr, op | FUTEX_PRIVATE_FLAG, val, val2, addr2, val3);
| ^~~~~~~~~~
| _q_futex
Fixes:
- http://autobuild.buildroot.org/results/ff90bc7680acf1487ed58e5e25cf1a5f13dfaedb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-cryptography is a python package, but it internally builds a rust
crate. As such, it needs to be vendored at install time.
Currently, we only pass the path to the sub-directory where the rust
source is in the package tree, but calling cargo needs additional
variables, most notably it needs CARGO_HOME to be set in the
environment, otherwise it ends up writing in the user's own cargo home,
which is by default ~/.cargo/
We do not really know what variables are used at vendor time, so we pass
the full Cargo environment, that we pass when building target packages.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a minor corrective release over GDB 11.1, fixing the following issues:
PR sim/28302 (gdb fails to build with glibc 2.34)
PR build/28318 (std::thread support configure check does not use
CXX_DIALECT)
PR gdb/28405 (arm-none-eabi: internal-error: ptid_t
remote_target::select_thread_for_ambiguous_stop_reply(const
target_waitstatus*): Assertion `first_resumed_thread != nullptr'
failed)
PR tui/28483 ([gdb/tui] breakpoint creation not displayed)
PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6)
PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF)
PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section)
PR gdb/28785 (Support SHT_RELR (.relr.dyn) section)
Drop patch 0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch, which was
merged upstream as commit 17d6f2152b583cdc7defafa7813b727a304bac5b.
Drop patch 0008-Fix-build-on-rhES5.patch, which was merged upstream as
commit df9ebc472a162306dee8ba6e02b99963c2babb7c?
Drop patch 0009-gdbserver-aarch64-support.patch, which was merged
upstream as commit eb79b2318066cafb75ffdce310e3bbd44f7c79e3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
NETLINK_EXT_ACK is only available since kernel 4.12 and
2d4bc93368
resulting in the following build failure since addition of the package
in commit 3675131e6c:
net.c: In function 'netlink_open':
net.c:110:36: error: 'NETLINK_EXT_ACK' undeclared (first use in this function); did you mean 'NETLINK_CAP_ACK'?
110 | if (setsockopt(sock, SOL_NETLINK, NETLINK_EXT_ACK,
| ^~~~~~~~~~~~~~~
| NETLINK_CAP_ACK
Fixes:
- http://autobuild.buildroot.org/results/c61678e56bd73609838747048f27068818c21150
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without shell-desktop raised since bump
to version 10.0.0 in commit f67a6e9b7a and
9e90760ab0:
In file included from ../tests/weston-test-client-helper.c:43:
../tests/weston-test-client-helper.h:40:10: fatal error: weston-screenshooter-client-protocol.h: No such file or directory
40 | #include "weston-screenshooter-client-protocol.h"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/8ece588f52fc1b4e422f8bce9b106d9d3822f1a1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gdk-pixbuf-xlib dependency is needed since bump of gdk-pixbuf to version
2.42.2 in commit a7b51ed301 to avoid the
following "hidden" warnings:
Warning: GTK version 2.24.33 was found, but at least one supporting
library (gdk-pixbuf-xlib-2.0) was not, so GTK can't be used.
Perhaps some of the development packages are not installed?
Warning: The GTK libraries do not seem to be available; the
`xscreensaver-demo' program requires them.
Warning: The GDK-Pixbuf library was not found.
The PNG library is being used instead.
Some of the demos will not use images as much as they could.
You should consider installing GDK-Pixbuf and re-running
configure.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Deprecated Xlib integration for GdkPixbuf.
gdk-pixbuf-xlib has been deprecated and split off of gdk-pixbuf since
version 2.42.0 and
3362e94c25
resulting in the following "hidden" warnings with xscreensaver since
commit a7b51ed301:
Warning: GTK version 2.24.33 was found, but at least one supporting
library (gdk-pixbuf-xlib-2.0) was not, so GTK can't be used.
Perhaps some of the development packages are not installed?
Warning: The GTK libraries do not seem to be available; the
`xscreensaver-demo' program requires them.
Warning: The GDK-Pixbuf library was not found.
The PNG library is being used instead.
Some of the demos will not use images as much as they could.
You should consider installing GDK-Pixbuf and re-running
configure.
https://gitlab.gnome.org/Archive/gdk-pixbuf-xlib
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#14611
BR2_KERNEL_HEADERS_LATEST_VERSION selects a 5.15.x series kernel (as that is
current LTS), but support for 5.16.x kernel headers has been added, so by
default the "custom kernel headers series" option ends up with 5.16.x (the
first option), leading to confusing errors:
Incorrect selection of kernel headers: expected 5.16.x, got 5.15.x
As a help, default to the correct 5.15.x series when this combination is
used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 4.8 raised since bump to
version 2.86 in commit 5b29096f8f:
pattern.c: In function 'is_valid_dns_name':
pattern.c:134:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (const char *c = value;; c++)
^
pattern.c:134:3: note: use option -std=c99 or -std=gnu99 to compile your code
pattern.c: In function 'is_valid_dns_name_pattern':
pattern.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (const char *c = value;; c++)
^
Fixes:
- http://autobuild.buildroot.org/results/eb0c34ff58eaf103f51c7171ecd97a3bdb887601
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security Near Miss
==================
* sshd(8): fix an integer overflow in the user authentication path
that, in conjunction with other logic errors, could have yielded
unauthenticated access under difficult to exploit conditions.
This situation is not exploitable because of independent checks in
the privilege separation monitor. Privilege separation has been
enabled by default in since openssh-3.2.2 (released in 2002) and
has been mandatory since openssh-7.5 (released in 2017). Moreover,
portable OpenSSH has used toolchain features available in most
modern compilers to abort on signed integer overflow since
openssh-6.5 (released in 2014).
Update license (md5crypt removed, bcrypt relicensed to BSD-3-Clause:
a5ab488234158bf854e2c0459588b8)
https://www.openssh.com/txt/release-8.9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-0554: Use of Out-of-range Pointer Offset in GitHub
repository vim/vim prior to 8.2.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following security issues (i.e. CVE-2021-37706, CVE-2021-41141,
CVE-2021-43804, CVE-2021-43845, CVE-2022-21722 and CVE-2022-21723):
- Potential integer underflow upon receiving STUN message
(GHSA-2qpg-f6wf-w984)
- Use after free of dialog set (GHSA-ffff-m5fm-qm62)
- Missing unreleased of locks in failure cases (GHSA-8fmx-hqw7-6gmc)
- Potential out-of-bounds read when parsing RTCP BYE message
(GHSA-3qx3-cg72-wrh9)
- Prevent OOB read for RTCP XR block (GHSA-r374-qrwv-86hh)
- Potential buffer overflow in pjsua_player_create(),
pjsua_recorder_create(), pjmedia_wav_player_create(), and
pjsua_call_dump() (GHSA-qcvw-h34v-c7r9)
- Potential out-of-bound read during RTP/RTCP parsing
(GHSA-m66q-q64c-hv36)
- Prevent OOB read in multipart parsing (GHSA-7fw8-54cv-r7pm)
- Use after free of dialog set (GHSA-ffff-m5fm-qm62)
https://github.com/pjsip/pjproject/releases/tag/2.12
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following security issues:
- [CVE-2022-23308] Use-after-free of ID and IDREF attributes
- Use-after-free in xmlXIncludeCopyRange
- Fix Null-deref-in-xmlSchemaGetComponentTargetNs
- Fix memory leak in xmlXPathCompNodeTest
- Fix null pointer deref in xmlStringGetNodeList
- Fix several memory leaks found by Coverity
https://gitlab.gnome.org/GNOME/libxml2/-/tags/v2.9.13
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/riscv64-buildroot-linux-uclibc/10.3.0/../../../../riscv64-buildroot-linux-uclibc/bin/ld: ../../libwinpr/libwinpr2.so.2.5.0: undefined reference to `backtrace_symbols_fd'
Fixes:
- http://autobuild.buildroot.org/results/095c33098a6e59ff664080e03baf1a3c92b4265f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set FRR_XREF_NO_NOTE to avoid the following build failures with
microblazeel, nds32 and xtensa raised since bump to version 8.1 in
commit ca2753fd47:
_clippy.ELFAccessError: virtual address (538157256) not found in program headers
[...]
/tmp/ccFGv94v.s:13: Error: can't resolve `__start_xref_array' {*UND* section} - `L0' {.note.FRR section}
/tmp/ccFGv94v.s:14: Error: can't resolve `__stop_xref_array' {*UND* section} - `L0' {.note.FRR section}
Here is an extract of
7347a4859d/lib/xref.h:
"the following blurb emits an ELF note indicating start and end of the xref
array in the binary. This is technically the "correct" entry point for
external tools reading xrefs out of an ELF shared library or executable.
...
FRR itself does not need this note to operate correctly, so if you have
some build issue with it just add -DFRR_XREF_NO_NOTE to your build flags
to disable it."
In other words, this is only *possibly* needed for another package that
wants to extracts the xrefs. We currently don't have anything that
depends on frr in-tree, and it's not even installed in staging, so it's
hard to check, but it seems pretty unlikely that this is really needed.
Fixes:
- http://autobuild.buildroot.org/results/3cdb50f5e5a1b3f37a6edcd4276fcbf015e28828
- http://autobuild.buildroot.org/results/a3cc0b5090a1faa2bca9c8dfe0fec9b6a918ba4d
- http://autobuild.buildroot.org/results/694cc65478a82ec93d2074252892036855cdc49d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable sampling profiler on musl to avoid the following build falure
raised since bump to version 5.212.0-alpha4 in commit
df0b0fe691:
/home/buildroot/autobuild/instance-0/output-1/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/heap/MachineStackMarker.cpp:686:2: error: #error Need a way to get the frame pointer for another thread on this platform
686 | #error Need a way to get the frame pointer for another thread on this platform
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/87f52db7f8ebefa4c1ae3dd70d4a7a460f9aca35
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a U-Boot config fragment to set the correct control device tree file for
each board, rather than using the default (zcu100).
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Tested-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: reword commit message, rename fragment files]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
upstream advocated that DRM backend can be built without GBM:
https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/791
so drop dependencies on
BR2_PACKAGE_MESA3D_OPENGL_EGL || BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_WL
to allow DRM to be the default backend when fbdev will be removed in the
follow-up patch
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot looks for the environment variable DEVICE_TREE and uses its value if
set instead of the CONFIG_DEFAULT_DEVICE_TREE configuration option since
v2021.01, more specifically commit c0f1ebe9c1b9745e (binman: Allow selecting
default FIT configuration) - So unexport it like we do for other
"troublesome" environment variables to ensure consistent behaviour.
Reported-by: Neal Frager <nealf@xilinx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This release mostly fixes (security related) bugs including:
- Fix 12 decoder bugs found by oss-fuzz, including CVE-2020-0499
- Fix encoder bug CVE-2021-0561
Also:
- Replace first patch which was reverted by
4fbb6d4f2e
- Disable stack protection (enabled by default since
f706f28322)
- Drop md5 which is not provided anymore
- Update indentation in hash file (two spaces)
https://github.com/xiph/flac/releases/tag/1.3.4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
# python sample_python_txtorcon.py
Traceback (most recent call last):
File "/root/sample_python_txtorcon.py", line 1, in <module>
import txtorcon # noqa
File "/usr/lib/python3.10/site-packages/txtorcon/__init__.py", line 11, in <module>
File "/usr/lib/python3.10/site-packages/txtorcon/router.py", line 10, in <module>
File "/usr/lib/python3.10/site-packages/txtorcon/util.py", line 17, in <module>
File "/usr/lib/python3.10/site-packages/twisted/internet/defer.py", line 42, in <module>
ModuleNotFoundError: No module named 'typing_extensions'
python typing_extensions is required since python-twisted 22.1.0 [1]
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202537
[1] 6e768da0a1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/2088684091
python sample_python_pyyaml_dec.py
Traceback (most recent call last):
File "/root/sample_python_pyyaml_dec.py", line 5, in <module>
data = yaml.load(serialized)
TypeError: load() missing 1 required positional argument: 'Loader'
yaml.load() requires a loader argument since the move to version 6.0:
https://github.com/yaml/pyyaml/pull/561
The test does not need the extra functionality of load(), so instead move to
the recommended safe_load().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-21699: IPython (Interactive Python) is a command shell for
interactive computing in multiple programming languages, originally
developed for the Python programming language. Affected versions are
subject to an arbitrary code execution vulnerability achieved by not
properly managing cross user temporary files. This vulnerability allows
one user to run code as another on the same machine. All users are
advised to upgrade.
Also update indentation in hash file (two spaces)
https://github.com/ipython/ipython/security/advisories/GHSA-pq7m-3gw7-gq5x
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-librsvg install a gdk-pixbuf module (aka plugin). As such, it needs
to update [0] the modules cache (a kind of registry of which modules are
installed and what the can handle). To that effect, it calls the utility
gdk-pixbuf-queryloaders, which generates the cache of existing modules.
gdk-pixbuf-queryloaders, from the gdk-pixbuf package, has been
configured to be relocatable. However, it still embeds the path to where
it was instaled, and thus where to look modules from. If it is run from
its install location, then gdk-pixbuf-queryloaders looks modules in that
location, and generates a modules cache with relative paths; otherwise,
it still looks at that location, but generates a cache with absolute
paths. In the later case, it will miss the modules that have not been
installed by gdk-pixbuf itself.
In the case of host-librsvg, that will miss the fact that librsvg just
happened to have installed a module. Further down the road, packages
that depend on host-librsvg, will get their PPD prepared, the path fixup
hook run, so that the cache properly points to the current package's
PPD, but the cache will not include the SVG module, which causes
failures to load CVG images:
Can't load file: Unrecognized image file format
So, we need to tell gdk-pixbuf-queryloaders where the module path is,
which restores the relativity of the paths it reports, by specifying the
modules path pointing to the current package's PPD, passed in the
environement variable GDK_PIXBUF_MODULEDIR.
We need to do that at install time, so that the SVG module is properly
listed in the cache, so that dependees can use it.
A temporary cache is also generated at build time, but its usefullness
is dubious; it seem to only be used by the test tool, which we do not
run. However, for consistency-sake, we also fix that.
Fixes:
- http://autobuild.buildroot.org/results/0e00059b09b4445eaaec1030997883187c6a80d6
[0] This will trigger file-overwrite detection in the future... But we
currently do not have infrastructure to properly handle such a cache.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: reword and extend an already-good commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Replace PYTHON_VERSION_MAJOR by PYTHON3_VERSION_MAJOR now that python2
has been dropped
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace PYTHON_VERSION_MAJOR by PYTHON3_VERSION_MAJOR now that python2
has been dropped. It should be noted that PYTHON_SITE_PKG was wrongly
set since the addition of the package in commit
4470bc9914
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make webkitgtk enable color management support if the lcms2 package has
been selected.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdk-pixbuf is based on plugins (modules in gdk-pixbuf parlance) that are
provided either by the gdk-pixbuf package itself, or be installed by
third-party packages, like librsvg. At runtime, those plugins get loaded
by helper function in the gdk-pixbuf library.
The location where to find those modules is currently hard-coded at
build time, to the location where gdb-pixbuf is installed.. This means
that host-packages that install image-conversion utilities will try to
look in the path where gdk-pixbuf was installed.
With per-package directories, this fails to find any module that was
installed bu a third-party package. For example, the module for loading
an SVG provided by librsvg, so it is not present in the PPD of
gdk-pixbuf, and thus loading an SVG (e.g. to convert it to another
format, like adwaita-icon-theme does) will fail with:
Can't load file: Unrecognized image file format
However, gdk-pixbuf can be configured so as to look for the modules
relative to where the program is run from, rather than hard-coding the
location at build time. This is exactly what we need in the PPD case
Additionally, even without PPD, this would fail in a similar manner in
the SDK, as that can be relocated too.
So we unconditionally enable the relocatable option, but only for the
host variant (there is no reason to enable it for the target, as it is
not going to be relocated).
Fixes:
- http://autobuild.buildroot.org/results/0e00059b09b4445eaaec1030997883187c6a80d6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: reword the already-good commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issue:
- CVE-2021-45444: In zsh before 5.8.1, an attacker can achieve code
execution if they control a command output inside the prompt, as
demonstrated by a %F argument. This occurs because of recursive
PROMPT_SUBST expansion.
The 5.8.1 release is not listed in MD5SUM, so drop the md5 hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/peko/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/10.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: src/backtrace.o: in function `print_backtrace':
backtrace.c:(.text+0x37): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/74da4f4deab5f0ae9405d063ad52a5d4904a964d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog (since 2021.08.28, [1]):
e061299 wireless-regdb: Raise DFS TX power limit to 250 mW (24 dBm) for the US
2ce78ed wireless-regdb: Update regulatory rules for Croatia (HR) on 6GHz
0d39f4c wireless-regdb: Update regulatory rules for South Korea (KR)
acad231 wireless-regdb: Update regulatory rules for France (FR) on 6 and 60 GHz
ea83a82 wireless-regdb: add support for US S1G channels
4408149 wireless-regdb: add 802.11ah bands to world regulatory domain
5f3cadc wireless-regdb: Update regulatory rules for Spain (ES) on 6GHz
e0ac69b Revert "wireless-regdb: Update regulatory rules for South Korea (KR)"
40e5e80 wireless-regdb: Update regulatory rules for South Korea (KR)
e427ff2 wireless-regdb: Update regulatory rules for China (CN)
0970116 wireless-regdb: Update regulatory rules for the Netherlands (NL) on 6GHz
4dac44b wireless-regdb: update regulatory database based on preceding changes
[1] https://lore.kernel.org/linux-wireless/YhBCKWNw3IMfGs0L@ubuntu-x1/
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security fixes:
#562 CVE-2022-25235 -- Passing malformed 2- and 3-byte UTF-8
sequences (e.g. from start tag names) to the XML
processing application on top of Expat can cause
arbitrary damage (e.g. code execution) depending
on how invalid UTF-8 is handled inside the XML
processor; validation was not their job but Expat's.
Exploits with code execution are known to exist.
#561 CVE-2022-25236 -- Passing (one or more) namespace separator
characters in "xmlns[:prefix]" attribute values
made Expat send malformed tag names to the XML
processor on top of Expat which can cause
arbitrary damage (e.g. code execution) depending
on such unexpectable cases are handled inside the XML
processor; validation was not their job but Expat's.
Exploits with code execution are known to exist.
#558 CVE-2022-25313 -- Fix stack exhaustion in doctype parsing
that could be triggered by e.g. a 2 megabytes
file with a large number of opening braces.
Expected impact is denial of service or potentially
arbitrary code execution.
#560 CVE-2022-25314 -- Fix integer overflow in function copyString;
only affects the encoding name parameter at parser creation
time which is often hardcoded (rather than user input),
takes a value in the gigabytes to trigger, and a 64-bit
machine. Expected impact is denial of service.
#559 CVE-2022-25315 -- Fix integer overflow in function storeRawNames;
needs input in the gigabytes and a 64-bit machine.
Expected impact is denial of service or potentially
arbitrary code execution.
https://blog.hartwork.org/posts/expat-2-4-5-released/https://github.com/libexpat/libexpat/blob/R_2_4_5/expat/Changes
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch 0001-Add-check-program-for-symver-attribute.patch, introduced
in 683e8387d0, touches a autoconf relevant file which causes a
configure --recheck in the make step without proper CONF_ENV.
Running autoreconf prevents this.
Signed-off-by: Moritz Bitsch <moritz@h6t.eu>
[yann.morin.1998@free.fr: add comment, add commit reference]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With python 2.x support dropped these variables no longer exist, so
unconditionally use the python3 variant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since this is a helper script there is not much reason to show the
command that's been issued. Furthermore, the incantation has been
slightly extended since the script was introduced.
The only interesting reason to print the command is to know what image
it is being spawned into. However, this is prominently displayed by
docker the first time the script is run, as it can't find the image
locally and has to fetch it first. Afterwards, users can still use
'docker image ls' to see what images they have locally.
So let's remove 'set -x' before running docker.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: reword and expand commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Found by check-package:
package/libusb/0002-linux_usbfs-fix-maybe-uninitialized-error.patch:4: generate your patches with 'git format-patch -N'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add -std=c99 to fix the following build failure with gcc 4.8 raised
since bump to version 3.7.1 in commit
cc27267ae4:
In file included from abort_handler_s.c:35:0:
safeclib_private.h:167:18: error: anonymous variadic macros were introduced in C99 [-Werror=variadic-macros]
#define slprintf(...) fprintf(stderr, __VA_ARGS__)
^
Fixes:
- http://autobuild.buildroot.org/results/5c3468585942879b47331e05058d25d324c8cc23
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 471ecea5ee (core/show-info: 'name' only applies to packages)
removed the 'name' field for rootfs (really, for non-package) entries,
thus breaking the pkg-stats processing.
We fix that by excluding any entry that has no 'name', on the assumption
that if it has no name, it is not a package.
Reported-by: Xogium on IRC
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with gcc 4.8 raised since bump to
version 1.20.0 in commit 801131157d:
../gst-libs/gst/video/video-converter.c: In function 'convert_I420_v210':
../gst-libs/gst/video/video-converter.c:3771:7: error: 'for' loop initial declarations are only allowed in C99 mode
for (int j = width * 4 - 1; j >= 0; j--) {
^
Fixes:
- http://autobuild.buildroot.org/results/c4b1449f35debcbabff7e42abe239695d4ad4d21
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable builtin freetype2 which is enabled by default since bump to
version 2.0.18 in commit f4da031a77 and
834ec54127
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop workaround added by commit bf899e50d8
because sudo natively supports pkg-config for searching openssl (which
is enabled by default) since version 1.9.2 and
4cadd54951
As a side-effect, this will fix the following build failure when openssl
is not installed on host (as LIBS is set before AX_PROG_CC_FOR_BUILD):
configure:8162: checking whether the C compiler works
configure:8184: /usr/bin/gcc -O2 -I/home/buildroot/autobuild/instance-2/output-1/host/include -I/home/buildroot/autobuild/instance-2/output-1/host/include -L/home/buildroot/autobuild/instance-2/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-2/output-1/host/lib conftest.c -L/home/buildroot/autobuild/instance-2/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -lssl -L/home/buildroot/autobuild/instance-2/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -pthread -latomic -lcrypto -pthread -latomic >&5
/usr/bin/ld: skipping incompatible /home/buildroot/autobuild/instance-2/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libssl.a when searching for -lssl
/usr/bin/ld: skipping incompatible /home/buildroot/autobuild/instance-2/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libssl.a when searching for -lssl
/usr/bin/ld: cannot find -lssl
Fixes:
- http://autobuild.buildroot.org/results/7a5d4dd22343be46a5ddd1c1a1a8e1799517d564
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the docker-run script starts a container based on the
reference image, in which the user has UID:GID set to 1000:1000,
which may or may not be the same as local user uses, which may
prevent the commands in the container from creating files, which
foils the plan of using the container to run a build...
Additionally, the paths in the container differ from the paths
the user expects, as the current Buildroot tree is mounted over
the in-container user home directory. This is a bit confusing...
Finally, the container is left hanging around after the command
finishes, and thus there are as many lingering containers as the
user runs docker-run. This is not very nice...
We fix all of that (yeah, should be different patches, but meh):
- we use --mount instead of -v, which allows us to bind-mount
the Buildroot tree at the same place in the container, as
Docker will create the destination if it does not exist, while
-v seems to expect it to exist [0].
- as a consequence, we can also set the working directory as the
Buildroot top-directory;
- use --user to force the same UID:GID in the container as the
local user, so that files created in the container belong to
the local user, and so that files from the local user are
accessible from the container;
- use --rm to remove the container once it terminates; starting
a new container is very quick anyway, so it is as good as
re-using a previous container.
[0] the documentation is not clear about that. It clearly states
that the host directory (i.e. the origin, the source) is created
if missing, but it says nothing of the destination:
https://docs.docker.com/engine/reference/commandline/run/#mount-volume--v---read-only
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This update drops distutils support and requires flit package
infrastructure.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds pep517(needed for flit-core to build itself) and flit python
package types.
We need to add an installer script and pass it appropriate options for
installing pep517 wheels generated by python-pypa-build during the
build stage. Unfortunately it seems pep517 does not support builds
without using the wheel format.
We also need to add a patch fixing the version parser in flit-core.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Arnout:
- fix indentation in pkg-python.mk (tabs, not spaces);
- use the new _CMD variables instead of duplicating the entire _CMDS
definitions;
- no need to filter dependencies (they're not self-referencing);
- _NEEDS_HOST_PYTHON no longer exists;
- host-python-pypa-build gets added to DEPENDENCIES automatically.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Initialize active_config to an invalid value to avoid the following
compilation error:
os/linux_usbfs.c: In function ‘op_get_configuration’:
os/linux_usbfs.c:1452:12: error: ‘active_config’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1452 | *config = (uint8_t)active_config;
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python package infrastructure defines a number of helper variables
that are used to construct the build and install commands. However,
there are still a few parts (setup.py and its argument) that are set
explicitly in _BUILD_CMDS and _INSTALL_CMDS. This creates problems if we
want to add another setup type that does not use setup.py.
Therefore, move the setup.py part into the helper variables as well.
Since this means that the variable becomes a full command rather than
just options, rename them to _BUILD_CMD and _INSTALL_CMD.
While we're at it, also clean up the whitespace in the definition of
these variables. They were aligned on = at some point, but that
alignment was already broken.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This was only needed when the mapboxgl submodule was a separate
package(was never included in buildroot only a patch series).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Default 60M for rootfs are not enough and generate a build failure, so
let's expand rootfs size to 120M.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
- http://autobuild.buildroot.net/results/cacd73e08cfb359d608bca807189b7bd3c5c79bd
v4l2-ctl.cpp:53:2: warning: identifier 'nullptr' is a keyword in C++11 [-Wc++0x-compat]
v4l2-ctl.cpp:53:37: error: 'nullptr' was not declared in this scope
[...]
v4l2-ctl-tuner.cpp: In function 'void parse_freq_seek(char*, v4l2_hw_freq_seek&)':
v4l2-ctl-tuner.cpp:160:10: error: 'constexpr' does not name a type
static constexpr const char *subopts[] = {
^
v4l2-ctl-tuner.cpp:160:10: note: C++11 'constexpr' only available with -std=c++11 or -std=gnu++11
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libusb unconditionally uses atomic since version 1.0.25 and
1a08aa84d9
resulting in the following build failure with pcsc-lite or openocd since
commit aad609936f:
checking for libusb_init... configure: error: libusb not found, use ./configure LIBUSB_LIBS=...
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libusb-1.0.so: undefined reference to `__atomic_fetch_add_4'
collect2: error: ld returned 1 exit status
Fixes:
- http://autobuild.buildroot.org/results/4a27a769bb3cdf78643c3049b87d792178d6512c
- http://autobuild.buildroot.org/results/b59b30cbe0e27399db5c7586f369104e68a1589a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Gcc bug 99140 exhibits with gcc versions:
- up to 7.x
- 9.x
- 10.x
and doesn't show up with gcc versions:
- 8.x
- 11.x
then moving BR2_TOOLCHAIN_GCC_AT_LEAST_9 to BR2_TOOLCHAIN_GCC_AT_LEAST_10
makes gcc version 9 set as working but it's not. So let's back substitute
BR2_TOOLCHAIN_GCC_AT_LEAST_10 with BR2_TOOLCHAIN_GCC_AT_LEAST_9.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nios2 ld emits warnings like:
'
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux-gnu/7.3.1/../../../../nios2-linux-gnu/bin/ld: FDE encoding in /home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux-gnu/7.3.1/libgcc.a(_umoddi3.o)(.eh_frame) prevents .eh_frame_hdr table being created.
'
Since '-Wl,--fatal-warnings' is passed by default, build fails, so don't
treat warnings as errors by appending "-Wl,--no-fatal-warnings" to
SYSTEMD_LDFLAGS the same way I've done for Microblaze in commit:
https://git.buildroot.net/buildroot/commit/?id=cc53d5357d84ff9b78d76e45ce216061df8a37c1
Fixes:
http://autobuild.buildroot.net/results/5fc884e11e46ab165ea21c8e8f2901516d79ff80/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable track-process to avoid the following build failure with
gcc < 4.9 raised since bump to version 2.2.7 in commit
79f631000f as suggested by upstream in
https://github.com/acassen/keepalived/issues/2094:
In file included from ../../lib/rbtree.h:24:0,
from ../../lib/rbtree_ka.h:26,
from ../../lib/scheduler.h:40,
from ../../lib/notify.h:31,
from ../../keepalived/include/vrrp.h:41,
from ../../keepalived/include/track_process.h:31,
from track_process.c:50:
../../lib/rbtree_types.h:31:25: error: initializer element is not constant
#define RB_ROOT (struct rb_root) { NULL, }
^
Fixes:
- http://autobuild.buildroot.org/results/2132570fb0407abc0e70146d771471e13ef10237
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Without -i, the container cannot be used interactively. Allow using it as
in:
$ ./utils/docker-run
+ exec docker run -v /home/ceresoli/devel/buildroot:/home/br-user -it registry.gitlab.com/buildroot.org/buildroot/base:20220206.1756
br-user@1e9508a4ccbb:~$ ls
arch board boot CHANGES Config.in Config.in.legacy configs COPYING DEVELOPERS docs fs linux Makefile Makefile.legacy output package README support system toolchain utils
br-user@1e9508a4ccbb:~$
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
/usr/bin/bash does not exist on Ubuntu 2018.04. Use the more portable
alternative "#!/usr/bin/env bash" which we are already using in quite
a few scripts.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Fixes: 242e9d72e7 ("utils/docker-run: new script")
[yann.morin.1998@free.fr: use "#!/usr/bin/env bash", not "@!/bin/bash"]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 572d08ee4a forgot to set
BLUEZ5_UTILS_AUTORECONF resulting in the following build failure:
/home/peko/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sh4-buildroot-linux-uclibc/10.3.0/../../../../sh4-buildroot-linux-uclibc/bin/ld: gobex/gobex-packet.o: in function `g_obex_packet_set_data':
gobex-packet.c:(.text+0x698): undefined reference to `util_memdup'
It should be noted that previous commit didn't fix any build failure
with libglib >= 2.69. It only fixes the following warning:
profiles/battery/battery.c: In function 'read_initial_battery_level_cb':
profiles/battery/battery.c:162:2: warning: 'g_memdup' is deprecated (declared at /home/buildroot/autobuild/instance-0/output-1/host/bin/../arm-buildroot-linux-gnueabi/sysroot/usr/include/glib-2.0/glib/gstrfuncs.h:257): Use 'g_memdup2' instead [-Wdeprecated-declarations]
batt->initial_value = g_memdup(value, length);
^
So an other option would be to revert this commit.
The 'real' build error that previous commit tried to fix was raised
because rand was replaced by getrandom since
https://git.kernel.org/pub/scm/bluetooth/bluez.git/log/?qt=grep&q=getrandom
but getrandom is not available until glibc 2.25:
plugins/autopair.c:20:24: fatal error: sys/random.h: No such file or directory
#include <sys/random.h>
^
Fixes:
- http://autobuild.buildroot.org/results/46f7dbfe1d80c7622d670ba1ac957e9e6077eb9f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
vapi (and gobject-introspection) is mandatory since bump to version
0.40.2 in commit 6acdbb81c8:
valac -C --pkg posix --pkg libxml-2.0 --pkg gmodule-2.0 --pkg gio-2.0 --pkg gssdp-1.2 --pkg gee-0.8 --pkg gupnp-1.2 --target-glib ' 2.56' --pkg glib-2.0 --color=always --directory src/librygel-core/librygel-core-2.6.so.2.0.4.p --basedir ../src/librygel-core --library rygel-core-2.6 --header src/librygel-core/rygel-core.h --vapi ../rygel-core-2.6.vapi --gir ../Rygel-2.6.gir ../src/librygel-core/rygel-build-config.vapi ../src/librygel-core/rygel-connection-manager.vala ../src/librygel-core/rygel-basic-management.vala ../src/librygel-core/rygel-basic-management-test.vala ../src/librygel-core/rygel-basic-management-test-ping.vala ../src/librygel-core/rygel-basic-management-test-nslookup.vala ../src/librygel-core/rygel-basic-management-test-traceroute.vala ../src/librygel-core/rygel-description-file.vala ../src/librygel-core/rygel-dlna-profile.vala ../src/librygel-core/rygel-energy-management.vala ../src/librygel-core/rygel-root-device.vala ../src/librygel-core/rygel-root-device-factory.v
ala ../src/librygel-core/rygel-dbus-interface.vala ../src/librygel-core/rygel-log-handler.vala ../src/librygel-core/rygel-meta-config.vala ../src/librygel-core/rygel-plugin-loader.vala ../src/librygel-core/rygel-recursive-module-loader.vala ../src/librygel-core/rygel-plugin.vala ../src/librygel-core/rygel-resource-info.vala ../src/librygel-core/rygel-media-device.vala ../src/librygel-core/rygel-configuration.vala ../src/librygel-core/rygel-base-configuration.vala ../src/librygel-core/rygel-cmdline-config.vala ../src/librygel-core/rygel-environment-config.vala ../src/librygel-core/rygel-user-config.vala ../src/librygel-core/rygel-state-machine.vala ../src/librygel-core/rygel-v1-hacks.vala ../src/librygel-core/rygel-icon-info.vala ../src/librygel-core/rygel-xml-utils.vala ../src/librygel-core/rygel-plugin-information.vala
error: Package `gssdp-1.2' not found in specified Vala API directories or GObject-Introspection GIR directories
error: Package `gupnp-1.2' not found in specified Vala API directories or GObject-Introspection GIR directories
Depends on BR2_PACKAGE_GSTREAMER1_EDITING_SERVICES instead of selecting
it to avoid the following recursive dependency:
package/gstreamer1/gstreamer1/Config.in:5:error: recursive dependency detected!
package/gstreamer1/gstreamer1/Config.in:5: symbol BR2_PACKAGE_GSTREAMER1 is selected by BR2_PACKAGE_RYGEL_MEDIA_ENGINE_GSTREAMER1
package/rygel/Config.in:46: symbol BR2_PACKAGE_RYGEL_MEDIA_ENGINE_GSTREAMER1 is part of choice <choice>
package/rygel/Config.in:39: choice <choice> contains symbol <choice>
package/rygel/Config.in:39: choice <choice> contains symbol BR2_PACKAGE_RYGEL
package/rygel/Config.in:1: symbol BR2_PACKAGE_RYGEL depends on BR2_PACKAGE_PYTHON3
package/python3/Config.in:5: symbol BR2_PACKAGE_PYTHON3 is selected by BR2_PACKAGE_JACK2_DBUS
package/jack2/Config.in:35: symbol BR2_PACKAGE_JACK2_DBUS depends on BR2_PACKAGE_JACK2
package/jack2/Config.in:1: symbol BR2_PACKAGE_JACK2 is selected by BR2_PACKAGE_FLUIDSYNTH_JACK2
package/fluidsynth/Config.in:37: symbol BR2_PACKAGE_FLUIDSYNTH_JACK2 depends on BR2_PACKAGE_FLUIDSYNTH
package/fluidsynth/Config.in:1: symbol BR2_PACKAGE_FLUIDSYNTH is selected by BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_FLUIDSYNTH
package/gstreamer1/gst1-plugins-bad/Config.in:425: symbol BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_FLUIDSYNTH depends on BR2_PACKAGE_GSTREAMER1
Fixes:
- http://autobuild.buildroot.org/results/027ce84895fab6fb251dd37cd5cfb7169287a2de
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Using a different renaming option for the icu host build can cause
issues for packages such as qt5webengine which expect target and
host packages to be built with the same options.
A package that needs both host and target to have the same options is most
probably doing somethig wrong, like linking a host program and taking the
result as valid for the target.
However, our adding the --disable-renaming in the first place in 3911e67151
(icu: security bump to version 51.2) did not provide any explanations why it
was needed to begin with, so drop it.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Peter: extend commit message as suggested by Yann]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TechSmith fork of mp4v2 needs gcc >= 5:
https://github.com/TechSmith/mp4v2/issues/47
As a result, the following build failure is raised since bump to version
5.0.1 in commit df22a9d6b7:
In file included from ./include/mp4v2/mp4v2.h:58:0,
from ./libplatform/platform_posix.h:37,
from ./libplatform/platform.h:24,
from libplatform/impl.h:6:
./include/mp4v2/file.h:336:5: warning: identifier 'nullptr' is a keyword in C++11 [-Wc++0x-compat]
ShouldParseAtomCallback cb = nullptr );
^
While a it, drop first patch which is not needed now that mp4v2 depends
on gcc >= 5
Fixes:
- http://autobuild.buildroot.org/results/178f1266396d44c6659a67d8e68cb99e36d544ea
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patches that are now upstream.
Jpeg dependency is now optional.
Add new backend compositor options.
Add comment indicating fbdev is deprecated(not yet removed).
Enable tools to match existing default(all enabled).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patch that is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the bump of libopenssl to 1.1.x support for offline DANE
verification can be enabled.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 2.5.1 in
commit 995c093d6a:
/home/peko/autobuild/instance-0/output-1/per-package/mpdecimal/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: cannot find -lpthread
Fixes:
- http://autobuild.buildroot.org/results/b20c090f2ac5ea6d1c761820763037b87bde137a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
cpe:2.3:a:mpd_project:mpd:*:*:*:*:*:*:*:* is not a valid CPE
identifier for mpd (musicpd.org); this string refers to
MPD /FreeBSD PPP daemon (sourceforge.net/projects/mpd)
Since mpd does not have entries in the CVE database, put these
two CVE identifiers on the mpd ignore list:
https://nvd.nist.gov/vuln/detail/CVE-2020-7465https://nvd.nist.gov/vuln/detail/CVE-2020-7466
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The cmake build appears to be missing features, such as pkg-config
generation support which is needed for some packages to find re2, like
qt5webengine.
Upstream is not keen on fixing the CMake-based buildsystem [0]
Instead of patching it on our side, and then have to carry the patch
forever, we switch to the Makefile-based generic buildsystem.
Note that previously some packages like grpc failed when the generic
Makefile was used, because they would not find the cmake-equivalent
of pkg-config, but this is now fixed [1].
[0] https://github.com/google/re2/issues/349
[1] 45e413d252
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: Reword commit message as suggested by Yann]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove the obsolete patch as docutils is now a setuptools package.
The package also includes code licensed under BSD-3-Clause licence.
COPYING.txt has the following changes:
* copyright year
* more exceptions from the Public Domain added
* BSD-3-Clause license added
* emacs mode is GPL-3.0+ instead of just GPL-3.0
* added Python-2.0 for roman.py
The "other" license is removed since the list covers all licenses
mentioned in COPYING.txt.
Also update hash file whitespace to two spaces.
Fixes:
http://autobuild.buildroot.net/results/02dd94c09dabdbdd8b47673393577a7fd3af3aeb
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since addition of icu support in
libxml2 through commit 49d7c85421:
In file included from /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/include/unicode/ptypes.h:52:0,
from /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/include/unicode/umachine.h:46,
from /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/include/unicode/utypes.h:38,
from /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/include/unicode/ucnv_err.h:88,
from /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/include/unicode/ucnv.h:51,
from /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/bin/../../usr/include/libxml2/libxml/encoding.h:31,
from /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/bin/../../usr/include/libxml2/libxml/parser.h:812,
from conftest.cpp:61:
/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/include/unicode/localpointer.h:224:41: error: 'noexcept' does not name a type
LocalPointer(LocalPointer<T> &&src) U_NOEXCEPT : LocalPointerBase<T>(src.ptr) {
^
/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-gnu/sysroot/usr/include/unicode/localpointer.h:224:41: note: C++11 'noexcept' only available with -std=c++11 or -std=gnu++11
Fixes:
- http://autobuild.buildroot.org/results/be043792e6e5501631517881b10096291a654364
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Webp nowadays has explicit configure options for jpeg/png/tiff, so use those
to explicitly enable/disable support.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will be needed by qt5webengine.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: explicitly disable gif/gl/jpeg/png/tiff support]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Andre Renaud <andre@ignavus.net>
[Arnout: reorder .mk so conditional parts come after unconditional, and
use += within conditions]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The doc-asciidoc infra allows document to define sources and resources,
and those can only be local (there is no download support for documents).
The currently documented way to specify those is to use the $(pkgdir)
macro to point to the document sources and resources when they are along
the .mk.
However, this works only for sources and not for resources.
Indeed, sources are used to generate Makefile dependency rules, so
$(pkgdir) is expanded and evaluated during the call to $(doc-asciidoc),
while resources are expanded and evaluated when the rules are executed,
which always happen after all the parsing has be done, at which point
$(pkgdir) expands to the last Makefile that was parsed, which is always
Buildroot's own manual.
This went unnoticed so far because Buildroot's manual is 1) the last to
be parsed, and 2) not using $(pkgdir) anyway.
Additionally, $(pkgdir) is mostly an internal macro, that is, as this
change demonstrates, difficult to use, and thus should not be used, in
packages or in documents.
We fix that by introducing $(FOO_DOCDIR), similar to $(FOO_PKGDIR),
which points to the document directory. We choose not to name the
variable FOO_PKGDIR, because it semantically is not a package.
As a consequence, the last argument to the doc-asciidoc macro is now
superfluous, so it is removed, which causes a little bit of churn in
the main macro. As a further consequence, the third argument in the
inner macro is no longer needed either, so it too is removed, which
causes a bit more churn yet in the inner macro.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Frederic GARDES <frederic.gardes@orange.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add rng tools. Without this, when booting, prompt will not
appear until 'random: crng init done' appears.
Avoid this by using rng tools without the libjitterentropy.
Libjitterentropy is a jitter source of entropy which does
not help for AT91 cpus as the jitter does not have
enough variance to generate fast enough entropy.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When building package guile with BR2_ENABLE_LOCALE=n
we get the following error:
```
In file included from filesys.c:95:
ports-internal.h:26:10: fatal error: iconv.h: No such file or directory
26 | #include <iconv.h>
| ^~~~~~~~~
compilation terminated.
```
So let's fix it by selecting BR2_PACKAGE_LIBICONV and
adding libiconv package as dependency.
Signed-off-by: Pedro Aguilar <paguilar@paguilar.org>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes:
* Exclude FAT partition, it is no longer needed for U-Boot.
* Switch the rootfs partition from MBR to GPT for partition-uuid to work.
* Switch to extlinux, this is convenient for debugging.
* Create common scenarios for multiple boards to create an SD image:
board/orangepi/common. Currently only orangepi_zero makes use of the
common infrastructure.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: remove rootfs size = 63M and remount rw]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Actually genimage fails to create final image with:
```
ERROR: hdimage(disk.img): partition [MBR] (offset 0x1b8, size 0x48) overlaps previous partition boot (offset 0x0, size 0x200)
ERROR: hdimage(disk.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
```
This is because genimage 15 is less permissive than before, so let's add
holes = {"(440; 512)"} to leave room to MBR.
The generated image is identical to the image generated by the previous
version of genimage.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935249
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The easrc firmware is used for audio resampling. The firmware for now
exists only for imx8mn device
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- depend and link against libexecinfo if enabled to fix linking failure
in case execinfo.h is detected for qlogging:
qt5base-5.15.2/src/corelib/global/qlogging.cpp:110 - __has_include(<execinfo.h>)
- libexecinfo already depends on !BR2_TOOLCHAIN_USES_GLIBC
- rename plain QT5BASE_CONFIGURE_ARCH_CONFIG to QT5BASE_CONFIGURE_ARCH_CONFIG_LIBATOMIC
Fixes:
- http://autobuild.buildroot.net/results/e7c685744b1f1bebb7fec9835bda534a72b7b7c2
.../riscv64-buildroot-linux-musl/bin/ld: .../build/qt5base-5.15.2/src/corelib/global/qlogging.cpp:1398: undefined reference to `backtrace_symbols'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some older versions of linux, or custom versions (like forks for some
boards), fail to build with host-gcc 10+, because of redefined symbols:
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition
of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
Since this has been fixed in recent-ish versions, we can't use an
unconditionaly patch, so we must have a conditional patch. However, a
patch may not always apply to arbitrary Linux versions or forks.
Upstream just dropped that line altogether:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e33a814e772cdc36436c8c188d8c42d019fda639
So, we use a little sed-grep combo to do the exact same change.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some older versions of U-Boot, or custom versions (like forks for some
boards), fail to build with host-gcc 10+, because of redefined symbols:
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition
of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
make[4]: *** [scripts/Makefile.host:106: scripts/dtc/dtc] E
Since this has been fixed in recent-ish versions, we can't use an
unconditionaly patch, so we must have a conditional patch. However, a
patch may not always apply to arbitrary U-Boot versions or forks.
Upstream just dropped that line altogether:
018921ee79
So, we use a little sed-grep combo to do the exact same change.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To support building in the wireless regulatory database files (regulatory.db*)
into the kernel using the CONFIG_EXTRA_FIRMWARE option, we need to ensure that
the database files are installed before the Linux kernel is built.
The dependency is harmless if CONFIG_EXTRA_FIRMWARE isn't actually set.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- only depend on libx11-xlib or libexpoxy if actually enabled
- simplify qt5 dependency
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to the latest libcamera commit.
This incorporates fixes and improvements for Raspberry Pi which will be
needed to go along side the new libcamera-apps package.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updating the busybox configuration files by loading and saving it back.
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
All the python packages are inside an if BR2_PACKAGE_PYTHON3, so with the
removal of python2 support, the explicit python3 dependency is redundant.
Remove it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python3-regex no longer exists, so there's no need to keep in sync with
it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-python3-setuptools was removed, we should instead use plain
host-python-setuptools.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update hostapd to the latest release v2.10. Drop all the patches
as they have already been upstreamed. Remove from .mk file all
the HOSTAPD_IGNORE_CVES records since those CVEs will not be
reported against the new version.
README's copyright year was updated.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update wpa_supplicant to the latest release v2.10. Drop all the patches
as they have already been upstreamed. Remove from .mk file all the
WPA_SUPPLICANT_IGNORE_CVES records since those CVEs will not be
reported against the new version.
README's copyright year was updated.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch:
- bumps ATF to Xilinx v2.6: mainline v2.6 requires patch to build
- bumps U-Boot to Xilinx 2022.01: important drivers not in mainline
- bumps Linux to Xilinx 5.15: important drivers not in mainline
- deletes board/zynqmp/patches directory: patches already in mainline
- modifies board/zynqmp/genimage.cfg: U-Boot 2022.01 uses u-boot.itb format
- adds extlinux.conf to vfat bootfs
- modifies U-Boot to unified xilinx_zynqmp_virt_defconfig (supports all boards)
- adds support for SPL pm_cfg_obj.c loading to PMU firmware
- enables support for host machines without OpenSSL required by U-Boot and Linux
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: only build tested]
[Peter: use git describe for git hashes for clarity]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the target bpftool build out of linux-tools so that it is
up to date.
This also fixes build issues due to differences between kernel
versions. The latest version should be fully backwards compatible.
The host bpftool is needed for enabling features such as the systemd
bpf-framework (to be added in a future patch).
Use the git download method to get the libbpf submodule.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Two source files had their header updated to correctly state the licence
is GPL-2.0+, not GPL-2.0. There is no real licensing change to the
project in this bump.
Release 2.4.8
-Fix Ideapad thermal shutdown issue #328
Release 2.4.7
- Fix AC/DC power limit issue in some HP TigerLake systems
- Regression fix for RAPL MSR usage in xml config file
- Added Japer Lake and Alder Lake CPU models
- Debug scripts for log collection to upload
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Old project homepage was removed, so switch to github, already in use to
download the sources.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit add a simple test checking the reported distro name and
id are Buildroot (as reported by /etc/os-release).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Arnout: drop python2 variant]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop conditonal python version handling now that python2 has been
removed.
Remove python3-setuptools and replace usage with python3 only
python-setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 5ac65831d5 (package/libiio: drop python2 support) combined
two LIBIIO_CONF_OPTS lines, but forgot the backslash at the end of the line.
Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop package which is not used by anyone and can't be built since drop
of host-python in commit 2743ce00ca
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that host-python2 is gone, it makes sense to unconditionally install the
symlinks for the host, similar to how it is done for the target.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that host-python2 is gone, the custom python3 variant can be dropped and
instead host support added to python-regex.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d9bf97cf16 (package/python-cryptography: drop host
variant) dropped the dependency on host-python3-pycparser, so it is now
unused. Drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d9bf97cf16 (package/python-cryptography: drop host
variant) dropped the dependency on host-python3-cffi, so it is now unused.
Drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The -z option for head was only added in coreutils 8.25, but some older
enterprise-grade distributions (e.g. the oldest still maintained RHEL 7)
only have nothing more recent than coreutils 8.22.
We fix that by using sed to remove everything that starts with the first
NULL byte, \x00.
Signed-off-by: Clayton Shotwell <clayton.shotwell@collins.com>
[yann.morin.1998@free.fr: hex is \xHH, not \xH, reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using a lzip compressed tarball to build host-lzip so lzip compressed
tarballs can be extracted naturally doesn't work. Use the .tar.gz format
instead.
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix plugin install path, add '-with-plugindir=/usr/lib/gstreamer-1.0',
otherwise the plugins are installed with duplicated build path
(as detected by step_check_build_dir)
- remove GST1_PLUGINS_BAYER2RGB_NEON_INSTALL_STAGING (no need to install
the plugin to staging)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- removed 0001-gst-rtsp-server-meson.build-add-gst_dep.patch
(upstream accepted [1])
- update COPYING/COPYING.LIB hash (license text update from LGPL-2.0+ to
LGPL-2.1+, see [2]) and adjust GST1_RTSP_SERVER_LICENSE accordingly
[1] e637aae629.patch
[2] cc5cdab016.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- update COPYING hash (license text update from LGPL-2.0+ to LGPL-2.1+,
see [1]) and adjust GST1_LIBAV_LICENSE accordingly
[1] d157b23fb0.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- use new option cairo ('Build GstValidateVideo') instead pure optional
dependency on packet cairo
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- enable new gpl option ('Allow build plugins that have GPL-licensed
dependencies') in case gpl plugin enabled
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- removed 0001-neon-Allow-building-against-neon-0-32-x.patch
(from upstream [1])
- add codecalpha option (VP8/VP9 alpha support)
- add qroverlay option (overlay data on top of video in the form of a QR code)
with json-glib and libqrencode dependencies (omit json-glib explicit
dependencies as they are the same as for gstreamer1, glib2 BR2_USE_WCHAR,
BR2_TOOLCHAIN_HAS_THREADS and BR2_USE_MMU), place instead to 'plugins without
external deps' section into 'plugins that need external deps' section as it
clearly has dependencies (prelimary to upstream commit [2])
- add aes option (AES encryption/decryption plugin)
- disable new option asio (Steinberg Audio Streaming, windows only)
- disable new option gs (Google Cloud Storage, needs storage_client library)
- disable new option ldac (LDAC bluetooth audio codec, needs ldacBT-enc library)
- remove legacy option ofa (disabled)
- disable new option onnx (ONNX neural network, needs libonnxruntime library)
- disable new option isac (iSAC plugin, needs webrtc-audio-coding-1 library)
- removed libmms ('Microsoft Multi Media Server streaming protocol' option,
add Config.in.legacy entry
- enable new gpl option ('Allow build plugins that have (A)GPL-licensed
dependencies') in case gpl plugin enabled
[1] b83e85ab67.patch
[2] 5d70c168b3.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- disable new qt5 (Qt5 QML examples) option (suboption of already disabled
tests/examples)
- update COPYING hash (license text update from LGPL-2.0+ to LGPL-2.1+,
see [1]) and adjust GST1_PLUGINS_BASE_LICENSE accordingly
[1] d157b23fb0.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- meson option gtk_doc removed ([1])
- update COPYING hash (license text update from LGPL-2.0+ to LGPL-2.1+,
see [2]) and adjust GSTREAMER1_LICENSE accordingly
[1] f5ee123958.patch
[2] d157b23fb0.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With host-python gone, BR2_PACKAGE_PYTHON3 will always be enabled for a
python package, so drop the legacy logic.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: drop from DEVELOPERS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The package alredy depended on python3, so no functional change.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
And adjust the comments to clarify that the toolchain dependencies are from
python3.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The configure script needs a bit of help to detect the python version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Python2 for the target is about to get removed, so drop the tests using it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The package was updated to support python3 in commit 4a8bedc51d
(python-pyzmq: enable PyZMQ for Python 3), but the comment dependency was
missed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Convert BR2_TOOLCHAIN_EXTERNAL_PATH to an absolute path when used.
Otherwise the symbolic links to the external toolchain binaries are
not installed in host/bin when BR2_TOOLCHAIN_EXTERNAL_PATH is relative.
This happens because TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
changes directory into host/bin to create the symbolic links.
From there the tools are no longer found via the relative path and
a single symbolic link host/bin/$(prefix)-* is created instead.
Although relative paths sounds like something less than ideal to put in
a Buildroot configuration, it's actually rather typical to put the
buildroot sources as a submodule (or subdirectory) of custom sources
(either in a BR2_EXTERNAL or not), in which case the relative path is
well-defined.
Signed-off-by: Juergen Stuber <juergen@jstuber.net>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Buildroot uses variable LINUX_ARCH_PATH to refer to the arch-specific
directory in the Linux tree, which may not necessarily be arch/$(KERNEL_ARCH).
Buildroot already accounts for the case of KERNEL_ARCH=i386 and
KERNEL_ARCH=x86_64, but does not for KERNEL_ARCH=sparc64, in which case the
correct directory is arch/sparc.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The variable 'KERNEL_ARCH' is actually a normalized version of
'ARCH'/'BR2_ARCH'. For example, 'arcle' and 'arceb' both become 'arc', just
as all powerpc variants become 'powerpc'.
It is presumably called 'KERNEL_ARCH' because the Linux kernel is typically
the first place where support for a new architecture is added, and thus is
the entity that defines the normalized name.
However, the term 'KERNEL_ARCH' can also be interpreted as 'the architecture
used by the kernel', which need not be exactly the same as 'the normalized
name for a certain arch'. In particular, for cases where a 64-bit
architecture is running a 64-bit kernel but 32-bit userspace. Examples
include:
* aarch64 architecture, with aarch64 kernel and 32-bit (ARM) userspace
* x86_64 architecture, with x86_64 kernel and 32-bit (i386) userspace
In such cases, the 'architecture used by the kernel' needs to refer to the
64-bit name (aarch64, x86_64), whereas all userspace applications need to
refer the, potentially normalized, 32-bit name.
This means that there need to be two different variables:
KERNEL_ARCH: the architecture used by the kernel
NORMALIZED_ARCH: the normalized name for the current userspace architecture
At this moment, both will actually have the same content. But a subsequent
patch will add basic support for situations described above, in which
KERNEL_ARCH may become overwritten to the 64-bit architecture, while
NORMALIZED_ARCH needs to remain the same (32-bit) case.
This commit replaces use of KERNEL_ARCH where actually the userspace arch is
needed. Places that use KERNEL_ARCH in combination with building of kernel
modules are not touched.
There may be cases where a package builds both a kernel module as userspace,
in which case it may need to know about both KERNEL_ARCH and
NORMALIZED_ARCH, for the case where they differ. But this is to be fixed on
a per-need basis.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Arnout: Also rename BR2_KERNEL_ARCH to BR2_NORMALIZED_ARCH]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Similar to other arch-specific strings, the 'KERNEL_ARCH' variable can be
determined from Config.in.<arch> files.
Besides aligning with similar strings, this also means simplification: the
big 'sed' covers several architectures not even supported by Buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ace needs C++11 since its addition in commit
3621918d1b to avoid the following build
failure:
In file included from /home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/chrono:35:0,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/Time_Value.h:23,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/OS_NS_unistd.h:25,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/ACE.inl:2,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/ACE.h:886,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/ACE.cpp:1:
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support is currently experimental, and must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
#error This file requires compiler and library support for the \
^
Fixes:
- http://autobuild.buildroot.org/results/13376405e313da112f546076a10859e60631d5d5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python support in avahi needs pygobjet to do anything:
Building avahi-python: no (You need python, pygobject and python-dbus!)
So add optional support for it. Python-gobject is only available for
python3, so change the python logic to use python 3.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not used by the configure script and refer to PYTHON_TARGET_BINARY
which was dropped back in 2010 by commit e3418f69cf (python: convert to
autotargets, bump to 2.7.1, many improvements), so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gnuradio only works with python3 since commit 786c783f37
(package/python-numpy: bump to version 1.18.2), so the python2/3 logic for
_PYVER can be dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
support/testing/tests/package/test_lua_cffi.py:14:1: W391 blank line at end of file
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As pointed out by Jan Lübbe, D-Bus support is optional:
> You can build without D-Bus (./configure --disable-service).
So drop it from the required dependencies and add a RAUC_DBUS sub option
like it is done for network/json.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, grpc depends on the full host-grpc, which in turn depends on host
versions of many other libraries. One of these, host-libabseil-cpp, also
requires a host gcc 4.9 or larger, a dependency which is not met on CentOS
7.
But in fact, the target grpc only needs the 'grpc_cpp_plugin' binary from
host-grpc. And that binary does not depend on host-libabseil-cpp or other
libraries, only on host-protobuf.
Given the above, simplify the grpc/host-grpc situation.
- Add a patch to the (host-)grpc CMakeLists.txt file to add an option to
only build grpc_cpp_plugin.
- Update grpc.mk and Config.in to remove the unnecessary dependencies, and
change the host-grpc configure options to make cmake happy.
The advantages of these changes are:
- making grpc available to older hosts with gcc < 4.8, like CentOS 7
- significantly reducing the build time of host-grpc and its dependencies
The patch was proposed upstream but not accepted with below rationale.
Perhaps input from others can help in persuading upstream in a future
attempt.
'What you're doing sounds like quite a narrow use case. But we simply
cannot provide a cmake option for every possible scenario in the world.
Introducing a new cmake option isn't for free and requires careful
design and maintenance.'
Nevertheless, given the benefits in terms of build time and dependency
reduction, it makes sense to apply this patch in spite of the disadvantage
of a local non-upstreamed patch.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Arnout: propagate removed dependency to collectd]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ACE is an open-source framework that provides many components and
patterns for developing high-performance, distributed real-time
and embedded systems. It provides powerful, yet efficient abstractions
for sockets, demultiplexing loops, threads, synchronization primitives.
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Kalpesh Panchal <kalpesh.panchal@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While committing the shellcheck feature, it was changed to output the
full shellcheck output even at verbosity level 1. However, the
expectation of the shellcheck test was not updated accordingly.
Do that now, simply merging all the shellcheck output in a single
string.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For simplicity, when shellcheck returns one or more warnings, count it
as a single check-package warning.
The developer can get the full output either by running shellcheck
directly or by calling check-package with -v.
Examples:
|$ ./utils/docker-run utils/check-package --include Shellcheck package/polkit/S50polkit
|package/polkit/S50polkit:0: run 'shellcheck' and fix the warnings
|51 lines processed
|1 warnings generated
|$ ./utils/docker-run utils/check-package --include Shellcheck -v package/polkit/S50polkit
|package/polkit/S50polkit:0: run 'shellcheck' and fix the warnings
|In package/polkit/S50polkit line 43:
|< tab >start|stop|restart|reload)
| ^----^ SC2221: This pattern always overrides a later one on line 45.
|In package/polkit/S50polkit line 45:
|< tab >reload)
| ^----^ SC2222: This pattern never matches because of a previous pattern on line 43.
|For more information:
| https://www.shellcheck.net/wiki/SC2221 -- This pattern always overrides a l...
| https://www.shellcheck.net/wiki/SC2222 -- This pattern never matches becaus...
|51 lines processed
|1 warnings generated
NOTICE: shellcheck results depends on the version of the tool.
This is why the examples above run inside the docker image.
Also update .gitlab-ci.yml with the docker image after the change of
the previous commit. We don't actually use shellcheck in CI, but the
image from .gitlab-ci.yml is used by the docker-run script and we use
that to run shellcheck.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: make sure a single -v is enough to get shellcheck output;
update docker image tag in .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Allow developers to run check-package for init scripts, that call
shellcheck, without having to install the tool.
Since the docker have a fixed version of the tool, there will be no
difference between runs in different machines.
One can call:
$ utils/docker-run utils/check-package package/package/S*
$ utils/docker-run shellcheck package/package/S*
This change also allows to eventually run check-package for init scripts
in the GitLab CI.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enable the common checks:
- consecutive empty lines
- empty last line
- missing new line at end of file
- trailing space
- warn for executable files, with the hint to instead use
'$(INSTALL) -D -m 0755' in the .mk file
Check indent with tabs:
- add a simple check function to warn only when the indent is done
using spaces or a mix of tabs and spaces. It does not check indenting
levels, but it already makes the review easier, since it
diferentiates spaces and tabs.
Check variables:
- check DAEMON is defined
- when DAEMON is defined, check the filename is in the form S01daemon
- when PIDFILE is defined, expect it to be in /var/run and defined
using $DAEMON.
Also add unit test for this.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: avoid 'del NotExecutable_base' by importing the module instead
of the class; refer to manual in warnings]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently there are no .mk, Config.in, .patch or .hash files with
executable permissions in the tree.
But we don't want to have that.
So warn when a file checked by check-package has executable permission.
This check will be reused when testing SysV init scripts in the tree.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: use context manager for temp dir so it gets deleted]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some file formats have well-established syntax checkers.
One example of this is the tool 'shellcheck' that can analyse shell
scripts for common mistakes.
There is no reason to reimplement such tools in check-package, when we
can just call them.
Add the ability to check-package to call external tools that will run
once for each file to be analysed.
For simplicity, when the tool generated one or more warnings, count it
as a single warning from check-package, that can display something like
this:
|$ ./utils/check-package package/unscd/S46unscd
|package/unscd/S46unscd:0: run 'shellcheck' and fix the warnings
|25 lines processed
|1 warnings generated
|$ ./utils/check-package -vvvvvvvvvvvvvvvv package/unscd/S46unscd
|package/unscd/S46unscd:0: run 'shellcheck' and fix the warnings
|In package/unscd/S46unscd line 9:
| printf "Starting ${NAME}: "
| ^------------------^ SC2059: Don't use variables in the printf format string. Use printf "..%s.." "$foo".
|In package/unscd/S46unscd line 11:
| [ $? -eq 0 ] && echo "OK" || echo "FAIL"
| ^-- SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
|In package/unscd/S46unscd line 14:
| printf "Stopping ${NAME}: "
| ^------------------^ SC2059: Don't use variables in the printf format string. Use printf "..%s.." "$foo".
|In package/unscd/S46unscd line 16:
| [ $? -eq 0 ] && echo "OK" || echo "FAIL"
| ^-- SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
|For more information:
| https://www.shellcheck.net/wiki/SC2059 -- Don't use variables in the printf...
| https://www.shellcheck.net/wiki/SC2181 -- Check exit code directly with e.g...
|25 lines processed
|1 warnings generated
In this first commit, add only the ability for check-package to call
external tools and not an example of such tool, as adding each tool to
call may need update to the docker image and can lead to it's own
discussion on how to implement.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
nfsiostat is a python3 script, so keep it if python3 is enabled and not
python2:
head -n 1 target/usr/sbin/nfsiostat
#!/usr/bin/python3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a small script to run commands in the same docker image used in the
GitLab CI.
For instance, one can run check-package unit tests without installing
pytest directly in the host:
$ ./utils/docker-run python3 -m pytest -v utils/checkpackagelib/
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: fix shellcheck errors; add exec]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
... so we can catch regressions on check-package.
Update to the new docker image that was pushed after the previous
commit.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
So anyone willing to contribute to check-package can run all tests in
less than 1 second by using:
$ python3 -m pytest -v utils/checkpackagelib/
Most test cases are in the form:
@pytest.mark.parametrize('testname,filename,string,expected', function)
- testname: a short description of the scenario tested, added in order
to improve readability of the log when some tests fail
- filename: the filename the check-package function being tested thinks
it is testing
- string: the content of the file being sent to the function under test
- expected: all expected warnings that a given function from
check-package should generate for a given file named filename and
with string as its content.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
All local patches except on have been upstreamed, so let's remove them and
rename/rebase the remaining one.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch that is now upstream.
Set new x11 and libcanberra meson config options.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we configure glibc to not add compatibility support for
kernels older than the one used for the headers. This is on the
expectation that the system will never run on a kernel that is older
than the one used for the headers or, when Buildroot builds the kernel,
on another, older kernel.
However, in some situations, it is possible to build for a generic
system, where the kernel may be a different version. This can be the
case, for example, when Building an image that is to be used in a
container that can run on a range of machines each with different kernel
versions. In such a case, it is interesting to build glibc in a way as
to take better advantage of the newer kernels, and thus using newer
kernel headers, while still allowing running on older kernels, and thus
carrying more compatibility code.
We add an option to glibc to allow the user to enable compatibility
shims. To simplify the case, when that option is enabled, we just let
glibc enable as old compatibility shims as supported by the current
architecture.
The code size increase is very small. For an ARM Cortex-A7, with
gcc-10.3.0, the delta is as follows (other files installed by glibc had
no size delta; sizes in bytes):
file | no compat | compat | delta
----------------------+-----------+-----------+-------
ld-linux-armhf.so.3 | 200216 | 200284 | + 68
libc.so.6 | 1814496 | 1823120 | +8624
------+-------
Total | +8692
No runtime overhead has been measured; the overhead is most probably
in the measurement noise. Indeed, the compatibility shims are very
lightweight. For example, there are 9 arch-generic shims:
renameat2(), execveat(), mlock2(), statx(), faccessat2(),
close_range(), time64-related syscall shenanigans, a waitid()
feature, and a futex operation (LOCK_PI2)
and then each arch may define a few others. i386 has less than 20
(mostly related to socket options, and one for the ordering of the
clone() arguments), while ARM seems to have only two (mlock2() and a
configurable futex feature).
Note: however, as Arnout pointed out, some programs may still actually
fail to run even with such compatibility shim, if they really expect the
shimed syscalls to really exist and have no fallback (and/or no proper
error-handling). Still, in the vast majority of cases, those
compatibility shims are enough to have a system running.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux kernel to 5.16.1 and U-Boot to 2022.01. Select option
BR2_TARGET_UBOOT_NEEDS_OPENSSL since U-Boot requires openssl.
Root filesystem does not fit into default 60M anymore,
so increase its size.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries
to the appropriate 'partition-type-uuid'. Then genimage starts to
complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
To fix the second genimage error report, update the size of bootloader
file. Do not reserve additional space for GPT partition table since
new genimage is able to keep track of it.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478371
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libuhttpd needs MMU since version 3.13.0 and
ffdf7de3a4
to avoid the following build failure raised since commit
61797c52f5:
/home/buildroot/autobuild/instance-0/output-1/build/libuhttpd-3.14.1/src/cgi.c: In function 'create_cgi':
/home/buildroot/autobuild/instance-0/output-1/build/libuhttpd-3.14.1/src/cgi.c:321:11: error: implicit declaration of function 'fork' [-Werror=implicit-function-declaration]
321 | pid = fork();
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/8d2a79dacf9ac423f7ece51b8c23f3683238312b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- depend and link against libexecinfo if enabled to fix linking failure
in case execinfo.h is detected, see
libcamera-40f5fddca7f774944a53f58eeaebc4db79c373d8/meson.build:
32 if cc.has_header_symbol('execinfo.h', 'backtrace')
33 config_h.set('HAVE_BACKTRACE', 1)
34 endif
- libexecinfo already depends on !BR2_TOOLCHAIN_USES_GLIBC
Fixes:
- http://autobuild.buildroot.net/results/a1077815895ab847c5ca82ec17c7d13fe97cff53
.../powerpc-buildroot-linux-uclibc/bin/ld: src/libcamera/base/libcamera-base.so.p/log.cpp.o: in function `libcamera::Logger::backtrace()':
log.cpp:(.text+0x34b0): undefined reference to `backtrace'
.../powerpc-buildroot-linux-uclibc/bin/ld: log.cpp:(.text+0x34c0): undefined reference to `backtrace_symbols'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LTP now builds metadata directory for the host. It supports
cross-compilation, we just need to pass HOST_CFLAGS and HOST_LDFLAGS in
addition to the target flags. They have to be passed to make, adding
them to configure does not work. Without this, on some architectures the
-mlongcalls and -mauto-litpools get passed to the host compile, but
they're not valid there.
Drop patches from this release.
Refresh 0001-lapi-Add-sysinfo.h-to-fix-build-with-MUSL-libc.patch
(still safe to carry it).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
lua-sdl2 is not available on Lua 5.4, so update its test to use Lua 5.3
instead.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add boost context support for aarch64/aarch64_be.
Context support for ARM is only available in the AAPCS ABI, so switch to
AAPCS ABI for all ARM variants.
While we're at it, update the URL about the context architecture support
to the one corresponding to the current version of boost.
Signed-off-by: Pieter De Gendt <pieter.degendt@gmail.com>
[Arnout: update URL, extend commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-six is not a dependency since version 1.0.0 and
3aae6a0bb6
which dropped python 2 support
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CONTRIBUTING.md hash changed due to various style updates and
additions.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Copyright year updated in LICENSE.txt.
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some software decides based on uid/gid whether a user is a system or
normal (human) user, with different behaviour for those flavors (example
journald [2]).
So adding logic to create system-users is necessary, we take the now
common ranges from [1].
This extends the mkusers script to allow -2 for uid/gid, this argument
will take an identifier from the user range. All identifiers used up to
now should have been from the system range, so -1 is now interpreted as
a system user/group.
Note that after this commit, all the UIDs and GIDs that are created
automatically (with -1) will change. That means if there is peristent
data on an existing system that was created by such an automatic user,
it will suddenly belong to a different user. However, this could already
happen before: if a USERS line is added to a package, then other UIDs
may change as well.
Add system/user ranges as variables, and the argument for user/system
uid variable as well. Thus some magic constants could be removed, some
further occurences of -1 were replaced with equivalent logic. For
consistency, the existing MIN/MAX_UID/GID variables are renamed to
FIRST/LAST_USER_UID/GID.
Update the documentation with the new automatic ranges.
[1] - https://systemd.io/UIDS-GIDS/
[2] - https://www.freedesktop.org/software/systemd/man/journald.conf.html
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: use -1 for system users; refactor the changes a bit]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since commit 6dd5a33c48 (zynq_zed: bump U-Boot to xilinx-v2016.2), we
have no in-tree users of zynq-boot-bin.py, as U-Boot has since v2016.01
been able to natively generate Xilinx images.
zynq-boot-bin.py is python2-only and there is zero chance that upstream
will move it to python3. We could carry a python3-compatible copy, but
that tool is now virtually unused.
6 years have passed now; let it rest in peace at last.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LibTIFF 4.3.0 has an out-of-bounds read in _TIFFmemcpy in tif_unix.c in
certain situations involving a custom tag and 0x0200 as the second word
of the DE field.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2022-23219: Passing an overlong file name to the clnt_create
legacy function could result in a stack-based buffer overflow when
using the "unix" protocol. Reported by Martin Sebor.
CVE-2022-23218: Passing an overlong file name to the svcunix_create
legacy function could result in a stack-based buffer overflow.
CVE-2021-3998: Passing a path longer than PATH_MAX to the realpath
function could result in a memory leak and potential access of
uninitialized memory. Reported by Qualys.
CVE-2021-3999: Passing a buffer of size exactly 1 byte to the getcwd
function may result in an off-by-one buffer underflow and overflow
when the current working directory is longer than PATH_MAX and also
corresponds to the / directory through an unprivileged mount
namespace. Reported by Qualys.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2022.01 and kernel to version 5.16.5.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backported from upstream GDB geb79b23, with ChangeLogs stripped so the
patch applies properly on Buildroot.
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=eb79b23
Fixes the following issue:
# gdbserver /dev/hvc1 inadyn -n -l debug
Process inadyn created; pid = 675
Remote debugging using /dev/hvc1
../../gdbserver/regcache.cc:257: A problem internal to GDBserver has been detected.
Unknown register tag_ctl requested
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[yann.morin.1998@free.fr: add SoB in patch, provided live on IRC]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This clarifies that custom DTSI files can be passed too,
and that the files are compiled after being copied to the
Linux kernel source tree.
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The bullet package exhibits gcc bug 68485 when built for the Microblaze
architecture with optimization enabled, which causes a build failure.
As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_68485=y like we
already do for BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y.
Fixes:
http://autobuild.buildroot.net/results/96e77ddba5042ba4dacb16b328fc298a4f00f49a/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The rtl8723b_fw.bin file installed by this package is not actually used
by this driver at all. It is used by the btrtl Bluetooth driver in the
mainline kernel. The mainline btrtl driver looks for the file in
/lib/firmware/rtl_bt rather than /lib/firmware/rtlwifi. This driver's
Makefile has an install target that confirms the correct destination
firmware directory. It was like that since the very first version that
was added to Buildroot.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version fixes a bug that prevents the user from switching from one
access point to another.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Pass needed CMake options to disable generating documentations. The
documentation is built using python-sphinx, which is not packaged in
Buildroot.
Prior to this change, if the build host would have a Python installation
with the sphinx module installed the automatic detection tried to build
documentation, which would fail in cases where the sphinxcontrib-qthelp
package is missing from the host Python installation. The error message
in this case was:
Extension error:
Could not import extension ecm (exception: cannot import name
'htmlescape' from 'sphinx.util.pycompat'
(/usr/lib/python3.10/site-packages/sphinx/util/pycompat.py))
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
avahi-client is an optional dependency which is enabled by default since
version 2.2.0 and
5ab117c974
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This points all qt5 packages to the latest kde submodule versions
available at https://invent.kde.org/qt/qt/qt5/-/tree/kde/5.15
There is no 5.15.8 release of the kde-maintained modules, no release
tarballs and no tags. Instead, there's just a rolling maintenance
branch. We take a snapshot of that branch and call it 5.15.8, to match
the latest qt5webengine release.
We need to remove some patches applied upstream already.
qt5location has mapboxgl as a submodule, which is not included in the
gitlab-generated tarball. Therefore, use the git download method with
submodules enabled.
We need to pin qt5 packages not available in the new upstream to the
previous 5.15.2 version.
We need to set SYNC_QT_HEADERS for all qt5 packages in the new
upstream as headers are only copied in release archives which are
not provided in the kde upstream.
Instead of calling syncqt.pl, update the MODULE_VERSION in .qmake.conf
to 5.15.8 and create a .git file so to trigger headers sync during
configure.
Hold back updating qt5webengine for now since the latest version
requires significant changes to build, just tweak existing version
to be compatible with latest kde versions for now.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump of libglib2 to version
2.70 in commit 079923d5fa:
exec.c: In function 'bd_utils_exec_and_report_status_error':
exec.c:239:5: error: 'g_spawn_check_exit_status' is deprecated: Use 'g_spawn_check_wait_status' instead [-Werror=deprecated-declarations]
239 | if (!g_spawn_check_exit_status (exit_status, error)) {
| ^~
Fixes:
- http://autobuild.buildroot.org/results/8f9ca895cb07014804130a7ccbcb758b1d519470
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable demo programs through JAS_ENABLE_PROGRAMS option which is
available and enabled by default since version 2.0.14 and
e02518ce71
As a side-effect, this will avoid the following build failure raised
since bump to version 2.0.33 in commit
f791221c86:
[ 96%] Linking C executable imginfo
/home/buildroot/autobuild/instance-3/output-1/per-package/jasper/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/10.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: attempted static link of dynamic object `/home/buildroot/autobuild/instance-3/output-1/per-package/jasper/host/x86_64-buildroot-linux-uclibc/sysroot/lib/libc.so.1'
Fixes:
- http://autobuild.buildroot.org/results/b106fdf32ffa9e0ef1254e0a29fdcdc821020e08
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop python2 support.
Add new host-python-setuptools-scm dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Refresh 0032-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch now
that the MULTIARCH logic got updated by:
7e951f356e
Update license hash after a change of copyright years:
35955e4ade
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Override neon check to avoid the following build failure with uclibc-ng
raised since bump to version 5.0.1 in commit
df3f0c226f:
src/arch/simddetect.cpp:61:14: fatal error: sys/auxv.h: No such file or directory
61 | # include <sys/auxv.h>
| ^~~~~~~~~~~~
It should be noted that a patch to properly fix this build failure was
rejected by upstream as "ARM support without NEON would result in a very
slow Tesseract": https://github.com/tesseract-ocr/tesseract/pull/3717
So, a follow-up patch adding a dependency on !BR2_TOOLCHAIN_USES_UCLIBC
for all CPU architectures or only for ARM without NEON could be
approriate.
Fixes:
- http://autobuild.buildroot.org/results/0bac6491188b6681df2ca13eb230706e83cbb130
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable tests which are enabled since bump to version 2.0.35 in commit
13d4856b91 and
466a0b3c26
to avoid the following build failure if cmocka is built before
netopeer2:
In file included from /home/buildroot/autobuild/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/stdint.h:20,
from /home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/lib/gcc/riscv64-buildroot-linux-musl/10.3.0/include/stdint.h:9,
from /home/buildroot/autobuild/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/libyang/libyang.h:18,
from /home/buildroot/autobuild/instance-2/output-1/build/netopeer2-2.0.35/tests/test_sub_ntf.c:27:
/home/buildroot/autobuild/instance-2/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/bits/alltypes.h:53:24: error: conflicting types for 'uintptr_t'
53 | typedef unsigned _Addr uintptr_t;
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/0660a4f767d5cdaf07b28a508101b87f0300850f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-musleabihf/10.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: tests/fs-tests/integrity/integck-integck.o: in function `check_failed.constprop.0':
integck.c:(.text+0x96c): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/9409ebf6517db87672f3f4df5909a8ac4abfe8af
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since commit
4e36e8f208:
/tmp/instance-1/output-1/build/hiawatha-11.1/mbedtls/library/ecjpake.c: In function 'self_test_rng':
/tmp/instance-1/output-1/build/hiawatha-11.1/mbedtls/library/ecjpake.c:973:5: error: 'for' loop initial declarations are only allowed in C99 mode
for( size_t i = 0; i < len; i++ )
^
Fixes:
- http://autobuild.buildroot.org/results/1befc1552af91f34c600229138910c2078c2fdca
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed a few variables, as they were only used to communicate
between the meson package and pkg-meson.mk and are not needed
anymore.
Moved cross-compilation.conf.in out of meson package.
Creating the cross-compilation.conf files for packages is now
using the original template.
To avoid duplicate code, the common sed pattern is stored in
a make variable.
Use explicit Buildroot variables for compiler tools,
and some fixes. (TARGET_LDFLAGS and TARGET_CXXFLAGS
were mixed up with PKG_TARGET_CFLAGS)
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: keep PKG_MESON_INSTALL_CROSS_CONF in
TOOLCHAIN_TARGET_FINALIZE_HOOKS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move all logic related to handling meson packages to the
package/pkg-meson file. This now mirrors the other build
systems and keeps the package itself clean.
Correctly prefix variables with PKG_MESON_
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
size-stats-compare gives an overview of the size increase/decrease between
two cases, based on packages-file-list.txt. The 'detail' mode gives info per
file, otherwise per package.
But sometimes, you want the detailed per-file info, but only for a specific
package. Since the detailed output no longer lists the package name, you
cannot simply grep for it. A workaround was to filter the input
packages-file-list.txt's first, and then pass these filtered versions to
size-stats-compare.
Make this easier by adding the package name next to the filename in detailed
output. This allows grep'ing normally.
For example:
$ utils/size-stats-compare orig new -t 100 -d | grep ebtables
-67712 removed ebtables lib/ebtables/libebtc.so
-66764 removed ebtables lib/ebtables/libebt_nat.so
-66752 removed ebtables sbin/ebtables
-66704 removed ebtables lib/ebtables/libebt_arp.so
-66700 removed ebtables lib/ebtables/libebt_stp.so
-66700 removed ebtables lib/ebtables/libebt_among.so
-66684 removed ebtables lib/ebtables/libebt_ip.so
-66676 removed ebtables lib/ebtables/libebt_limit.so
-66656 removed ebtables lib/ebtables/libebt_log.so
-66648 removed ebtables lib/ebtables/libebt_mark.so
-66636 removed ebtables lib/ebtables/libebt_pkttype.so
-66604 removed ebtables lib/ebtables/libebt_vlan.so
-66588 removed ebtables lib/ebtables/libebt_ulog.so
-66588 removed ebtables lib/ebtables/libebt_nflog.so
-66584 removed ebtables lib/ebtables/libebt_arpreply.so
-66544 removed ebtables lib/ebtables/libebt_ip6.so
-66540 removed ebtables lib/ebtables/libebt_802_3.so
-66536 removed ebtables lib/ebtables/libebt_standard.so
-66524 removed ebtables lib/ebtables/libebt_mark_m.so
-66524 removed ebtables lib/ebtables/libebt_redirect.so
-66452 removed ebtables lib/ebtables/libebtable_filter.so
-66452 removed ebtables lib/ebtables/libebtable_broute.so
-66452 removed ebtables lib/ebtables/libebtable_nat.so
45 ebtables etc/ethertypes
66752 added ebtables usr/sbin/ebtablesd
66752 added ebtables usr/sbin/ebtables-legacy
66752 added ebtables usr/sbin/ebtablesu
200840 added ebtables usr/lib/libebtc.so.0.0.0
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
print_result is juggling with entry[x][y] which is not very readable.
While a better solution would be to use a class and reference named
attributes, that would require some bigger changes in the script.
Instead, make a minimal improvement by assigning the entry[x][y] values to
intermediate variables. Store them in a dict for easy usage from a format
string.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Build JavaScriptCore and WebCore as shared libraries to avoid a build
failure
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version
5.212.0-alpha4 in commit df0b0fe691:
CMake Error at /home/fabrice/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/cmake/Qt5/Qt5Config.cmake:28 (find_package):
Could not find a package configuration file provided by "Qt5Widgets" with
any of the following names:
Qt5WidgetsConfig.cmake
qt5widgets-config.cmake
Add the installation prefix of "Qt5Widgets" to CMAKE_PREFIX_PATH or set
"Qt5Widgets_DIR" to a directory containing one of the above files. If
"Qt5Widgets" provides a separate development package or SDK, be sure it has
been installed.
Call Stack (most recent call first):
Source/cmake/OptionsQt.cmake:646 (find_package)
Source/cmake/WebKitCommon.cmake:51 (include)
CMakeLists.txt:137 (include)
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- drop 0001-LOGCXX-528.patch (from upstream [1])
- renumber remainnig patch
Changelog (for deteils see [2]):
- This is a minor bugfix release to fix issues found with 0.12.0. Notably,
this version fixes a bug where a multithreaded application would crash
when using a rolling file.
[LOGCXX-534] - Crashed in log->forcedLog function when running with multi-thread
[LOGCXX-528] - log4cxx fails to build on Centos 7.6 / g++ 4.8.5 / Boost 1.53
[1] 249dd85494
[2] https://logging.apache.org/log4cxx/latest_stable/changelog.html#0.12.1
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- add patch 0002-boost-fallback-only-check-for-boost-if-really-needed.patch
to check for boost if really needed (in case of legacy c++ standard < c++17)
Fixes:
- http://autobuild.buildroot.net/results/8d49ab7cd9952f6a13bdd330e875012d0601f1d2
-- Found Boost: .../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include (found version "1.78.0") found components: thread chrono missing components: date_time atomic
CMake Error at .../build/log4cxx-0.12.0/boost-fallback-compile-tests/CMakeFiles/CMakeTmp/CMakeLists.txt:19 (add_executable):
Target "cmTC_aac37" links to target "Boost::date_time" but the target was
not found. Perhaps a find_package() call is missing for an IMPORTED
target, or an ALIAS target is missing?
CMake Error at .../build/log4cxx-0.12.0/boost-fallback-compile-tests/CMakeFiles/CMakeTmp/CMakeLists.txt:19 (add_executable):
Target "cmTC_aac37" links to target "Boost::atomic" but the target was not
found. Perhaps a find_package() call is missing for an IMPORTED target, or
an ALIAS target is missing?
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
apitrace uses very big switch statements, which causes the build to fail
on m68k, because the offsets there are only 16-bit.
We fix that by using -mlong-jump-table-offsets on m68k, to use 32-bit
offsets for switch statements. That flag is available on gcc version >= 7
but apitrace package already depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7, so
we can use it with no problem.
Fixes:
http://autobuild.buildroot.net/results/7306bf05962fec30fbe98b1eb8ee09b3162b8080/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-boot libfdt fails to compile on CI.
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478208
As this fix has been already upstreamed just bump U-boot package.
Let's also bump Kernel and ATF as the board is properly supported upstream.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure with openipmi raised since commit
8f6b346a34:
/home/peko/autobuild/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/10.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-musleabihf/sysroot/usr/lib/libfreeipmi.a(libfreeipmi_la-ipmi-md5.o): in function `md5_init':
ipmi-md5.c:(.text+0xa7c): multiple definition of `md5_init'; ../lib/.libs/libipmitool.a(md5.o):md5.c:(.text+0xab0): first defined here
Fixes:
- http://autobuild.buildroot.org/results/01b22faf08a798ecc5d5465e1c0c13fa024f1096
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure with openssl raised since bump to
version 1.3.3 in commit 163509a8e0:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sh4-buildroot-linux-uclibc/10.3.0/../../../../sh4-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-3/output-1/host/sh4-buildroot-linux-uclibc/sysroot/usr/lib/libssl.a(rec_layer_d1.o): in function `DTLS_RECORD_LAYER_new':
rec_layer_d1.c:(.text+0x124): undefined reference to `CRYPTO_malloc'
Fixes:
- http://autobuild.buildroot.org/results/75ad8515916dfa056b17c97fdd95c7eb4d83a304
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
01764876e3 ("package/python-cryptography:
bump version to 36.0.1") incorrectly removed the build dependency on
openssl. This causes the following build failure:
build/temp.linux-x86_64-3.10/_openssl.c:575:10: fatal error: openssl/opensslv.h: No such file or directory
575 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
as OpenSSL is no longer guaranteed to be built before
python-cryptography (the Config.in file still had a "select
BR2_PACKAGE_OPENSSL" guaranteeing that OpenSSL would be built, but not
necessarily before).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are currently using the fork by Adam, with support for duktape as a
JS engine. But upstream has finally merged that just a day ago. Woohoo!
Between the fork we were using and upstream, there are very little
changes, mostly centered around:
- translations
- buildsystem
- duktape
- CVE-2021-4034
So, we just switch to using the HEAD of the repo: it has not much more
than the two important changes: duktape and the CVE fix.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Marek Belisko <marek.belisko@open-nandra.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In BINUTILS_INSTALL_TARGET_CMDS (target!), libiberty is installed
to STAGING_DIR.
This is not necessary since libiberty is already unconditionally
installed to staging in BINUTILS_INSTALL_STAGING_CMDS. Furthermore
the presence of STAGING_DIR path in TARGET_CMDS is confusing and
incorrect.
Moreover libiberty is static only. Static libraries are only used at
build time, not at run time so we do not need to install libiberty in
target.
This commit removes the incorrect libiberty install in TARGET_CMDS and
adds a comment to clarify why we do not see libiberty installed on
target.
Signed-off-by: Jonathan Borne <jborne@kalray.eu>
[yann.morin.1998@free.fr:
- reword comment, move it toward the _INSTALL_TARGET_CMDS
- rewrap and slightly reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Replace CMAKE_DISABLE_FIND_PACKAGE_{DOXYGEN,LATEX} by JAS_ENABLE_DOC
which is available (and working as expected) since version 2.0.20 and
cddb7b199a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump to version 1.3.3 in
commit 163509a8e0:
>>> htpdate 1.3.3 Installing to target
PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-0/output-1/build/htpdate-1.3.3 DESTDIR=/home/buildroot/autobuild/instance-0/output-1/target install
make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/htpdate-1.3.3'
strip -s htpdate
strip: Unable to recognise the format of the input file `htpdate'
Fixes:
- http://autobuild.buildroot.org/results/f1034de5ebc2fc2c49711820077d0b6e5e13aea5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 6a51177af1 (package/mesa3d: always enable glx-direct if glx is
enabled) introduced a typo in the comment, fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2021-20330: An attacker with basic CRUD permissions on a
replicated collection can run the applyOps command with specially
malformed oplog entries, resulting in a potential denial of service on
secondaries. This issue affects MongoDB Server v4.0 versions prior to
4.0.25; MongoDB Server v4.2 versions prior to 4.2.14; MongoDB Server
v4.4 versions prior to 4.4.6.
Drop third patch (already in version)
https://docs.mongodb.com/master/release-notes/4.2/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link examples with -latomic to avoid the following build failure raised
since commit 3edc1cc44c:
FAILED: spa/examples/adapter-control
/home/buildroot/autobuild/instance-0/output-1/host/bin/sparc-linux-gcc -o spa/examples/adapter-control spa/examples/adapter-control.p/adapter-control.c.o -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -Wl,--start-group -lintl -ldl -pthread -lm -Wl,--end-group
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: spa/examples/adapter-control.p/adapter-control.c.o: in function `spa_graph_node_trigger':
adapter-control.c:(.text+0xdf4): undefined reference to `__atomic_fetch_sub_4'
Fixes:
- http://autobuild.buildroot.org/results/192f40a5c6e05fc11507494e19db52a47082fc35
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ClamAV 0.103.5 is a critical patch release with the following fix:
- CVE-2022-20698: Fix for invalid pointer read that may cause a crash.
Affects 0.104.1, 0.103.4 and prior when ClamAV is compiled with
libjson-c and the CL_SCAN_GENERAL_COLLECT_METADATA scan option (the
clamscan --gen-json option) is enabled.
https://github.com/Cisco-Talos/clamav/blob/clamav-0.103.5/NEWS.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop python2 support and propagate dependency changes.
Ensure optimized cython build is enabled and add host cython
dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Users may want to debug Go programs using dlv on the host machine.
Adds package host-delve and BR2_PACKAGE_HOST_DELVE.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CVE-2021-43816: "Unprivileged pod using `hostPath` can side-step active LSM when
it is SELinux"
Containers launched through containerd’s CRI implementation on Linux systems
which use the SELinux security module and containerd versions since v1.5.0 can
cause arbitrary files and directories on the host to be relabeled to match the
container process label through the use of specially-configured bind mounts in a
hostPath volume. This relabeling elevates permissions for the container,
granting full read/write access over the affected files and directories.
Kubernetes and crictl can both be configured to use containerd’s CRI
implementation.
https://github.com/advisories/GHSA-mvff-h3cj-wj9chttps://github.com/containerd/containerd/releases/tag/v1.5.9
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ZynAddSubFX is a fully featured open source software synthesizer
capable of making a countless number of instruments, from some
common heard from expensive hardware to interesting sounds that
you'll boost to an amazing universe of sounds.
https://zynaddsubfx.sourceforge.io/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pjsip:pjsip has been deprecated by teluu:pjsip since September 2021:
<cpe-23:cpe23-item name="cpe:2.3:a:pjsip:pjsip:2.7.1:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:teluu:pjsip:2.7.1:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
<cpe-item name="cpe:/a:pjsip:pjsip:2.7.2" deprecated="true" deprecation_date="2021-09-02T14:49:19.527Z">
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
RK3399_ROCKPRO64 has been picked from pine64/rockpro64 but here we deal
with orangepi-rk3399, so let's change the label to RK3399_ORANGEPI.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit add a simple test doing symmetric encryption/decryption
to check this python interface with the gpg binary is working fine.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This will use gcc-ar, gcc-nm and gcc-ranlib instead of the
normal binutils tools. The difference is that with the
wrappers, gcc plugins will be automatically picked up,
which is necessary to build with LTO.
With this enabled, it is possible to build everything (including libgcc
and libstdc++) with LTO by setting BR2_TARGET_OPTIMIZATION="-flto".
Note that you'd expect that the GCC build system would automatically do
this when --enable-lto is set, but this is not the case. There are some
open bugs [1][2] to allow building libgcc and libstdc++ with LTO support
but it's apparently not done yet.
Note that there are also reports of problems building libstdc++ with LTO
[3], but it seems that's no longer a problem (and the bug didn't get
updated).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=59893
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77278
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60160
Monitoring the target/ and host/ directories and so on, will serve to
generate lists of files installed by the packages. Those lists are then
used to generate graphs of the size those package take on the target
for example.
With PPD, we will also want to use those lists to only copy those files
actually installed by each dependencies of a package, recursively.
Currently, those lists are not entirely reliable, as the starting points
are established before we apply PPD fixup hooks. As such, at the end of
a package installation, fixed up files will be found to belong to the
current package, while they were in fact provided by one of its
dependency.
While this does no big harm, if at all, for the size graphs, it will
trigger overwrite detection when we eventually gather packages together
to aggregate a PPD or te final host and target. So, we better have the
lists of files be reliable.
So, we only start monitoring the directories after we apply the PPD
fixups (or seen the other way around for a smaller diff: we apply the
PPD fixups before we start monitoring the directories).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some files contain hard-coded absolute paths that point to the host
and/or staging directories.
With per-package directories (aka. PPD), these paths point to the PPD
of the package that created the files, when we want them to point to the
PPD of the package that uses them.
Up until now, we had two hooks that attempted to fix those files:
- a libtool-specific hook that searches for all .la files and seds
them with the proper PPD,
- a python-specific hook that tweaks just the sysconfigdata and
removes the byte-compiled version of the sysconfigdata.
But now, we also have a few other kinds of files for which we need to
fix the PPD: .cmake, .pc, or .pri files, and probably a bunch of others
as well.
We solve this issue by just replacing any PPD in text files, with the
current package's PPD.
This is very similar to, and inspired from what is done when relocating
the SDK. However, we can't use the existing relocate-sdk script, because
that needs to know the original location, which we do not have when we
aggregate the PPD (we could store it, but we can easily do without it).
Furthermore, we use a construct that is way more efficient than
relocate-sdk. First, we skip binary files with grep, which means we have
way less files to check with 'file' [0]. Second, we use xargs to sed
multiple files at once: printf is a shell built-in, so it's fast, and so
we do not have to spawn a sed for each file to fixup.
[0] We still keep using 'file' as a safety net, to avoid mangling a
binary file that grep would have missed.
Finally, the existing python-specific macro is simplified to just remove
the pre-compiled sysconfigdata files. And we rename it accordingly.
And as for some timings, to see the impact, with the defconfig below,
and with the downloads already local, and with a PC mostly idle (mail
and IRC activity only):
Before Now Delta
- without PPD : 7min 27s 7min 23s -0.9%
- with PPD : 7min 51s 7min 59s +1.7%
- with PPD -j8: 5min 51s 5min 56s +1.4%
So we can see a slight increase in time, but it is mostly in the noise
(some builds without this change did exceed some builds with this
change, due to background noise). Also, depending on scheduling, there
can be less parallelism; for example, python3 does not build in
parallel, and with this special defconfig, python is on the critical
path of a lot of packages that are python modules, which can negatively
impact a parallel build too. A more realistic, bigger defconfig would
probably be more parallel... YMMV...
Delta without PPD is also due to background noise, as those hooks are
not used when PPD is not enabled.
Defconfig used:
BR2_arm=y
BR2_cortex_a7=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON_AIOBLESCAN=y
BR2_PACKAGE_PYTHON_AIOCOAP=y
BR2_PACKAGE_PYTHON_AIOFILES=y
BR2_PACKAGE_PYTHON_AIOHTTP_CORS=y
BR2_PACKAGE_PYTHON_AIOHTTP_DEBUGTOOLBAR=y
BR2_PACKAGE_PYTHON_AIOHTTP_MAKO=y
BR2_PACKAGE_PYTHON_AIOHTTP_REMOTES=y
BR2_PACKAGE_PYTHON_AIOHTTP_SECURITY=y
BR2_PACKAGE_PYTHON_AIOHTTP_SESSION=y
BR2_PACKAGE_PYTHON_AIOHTTP_SSE=y
BR2_PACKAGE_PYTHON_AIOJOBS=y
BR2_PACKAGE_PYTHON_AIOLOGSTASH=y
BR2_PACKAGE_PYTHON_AIOMONITOR=y
BR2_PACKAGE_PYTHON_AIOPROCESSING=y
BR2_PACKAGE_PYTHON_AIOREDIS=y
BR2_PACKAGE_PYTHON_AIORWLOCK=y
BR2_PACKAGE_PYTHON_AIOZIPKIN=y
BR2_PACKAGE_LIGHTTPD=y
BR2_PACKAGE_LIGHTTPD_OPENSSL=y
BR2_PACKAGE_LIGHTTPD_ZLIB=y
BR2_PACKAGE_LIGHTTPD_BZIP2=y
BR2_PACKAGE_LIGHTTPD_PCRE=y
BR2_PACKAGE_LIGHTTPD_WEBDAV=y
# BR2_TARGET_ROOTFS_TAR is not set
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Louis-Paul CORDIER <lpdev@cordier.org>
Cc: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patch that is now upstream.
Drop python2 support.
Drop python-six dependency which is no longer needed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: update paramiko python3 dependency comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patches that are now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: don't duplicate _SETUP_TYPE]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
They are loosely ordered according to the ordering of the gcc
documentation. It is not entirely correct as the generic x86-64,
x86-64-v2, x86-64-v3 and x86-64-v4 are listed before i386 in the gcc
documentation, but this nevertheless gives a good explanation for the
overall ordering of the list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These were added in gcc 9.x. The goldmont, goldmont-plus and tremont
are for the low-power CPUs. While cascadelake and tigerlake are for
the high-end ones.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The x86-64-v4 toolchain assumes availability of AVX512, as per the
definition of the x86-64-v4 "standard".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Both skylake and skylake-avx512 were added in gcc 6.x. According to
https://en.wikipedia.org/wiki/Skylake_(microarchitecture) the early
Skylake processors indeed did not have AVX512 support, while the later
ones did, hence the separate gcc options.
Due to this being the first CPU we support with AVX512, this commit
adds BR2_X86_CPU_HAS_AVX512.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These were added in gcc commit
d3c11974032e21121a051d423a1d71097edf752f ("Use proper Intel processor
names for -march=/-mtune=") which was merged in gcc 4.9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In gcc commit d3c11974032e21121a051d423a1d71097edf752f ("Use proper
Intel processor names for -march=/-mtune="), which was merged in gcc
4.9, the following replacements were made:
* corei7 -> nehalem
* corei7-avx -> sandybridge
* core-avx-i -> ivybridge
* core-avx2 -> haswell
* atom -> bonnel
* slm -> silvermont
So this commit marks the Buildroot options BR2_x86_corei7,
BR2_x86_corei7_avx, BR2_x86_core_avx2 and BR2_x86_atom as deprecated,
and adds the four corresponding options with the newer names.
Note that the older options are still kept because the new option
names are only supported starting gcc 4.9, and we theoretically still
supports targets gcc as old as gcc 4.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The BR2_ARCH definition is like this:
* i486 for the i486 platform
* i586 for a small number of platforms
* i686 for all other x86 platforms when used in 32-bit, but we
enumerate their entire list
* x86_64 for all x86 64-bit platforms
The list for i686 is long and needs to be extended everytime a new
platform is added, with no added value.
So this commit simplifies that by replacing this long list with just:
default "i686" if BR2_i386
This works because Kconfig guarantees us that if an i386 platform
matches an earlier case (i486 or one of the i586 platforms), the i486
and i586 earlier in the list will match.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Following the merge of
d6ce2a1681 ("arch/Config.in.x86: add
option for -march=x86-64") and
eeace1cc13 ("arch/Config.in.x86: add support for
x86-64-v2, x86-64-v3, x86-64-v4"), bootlin.toolchains.com now provides
toolchains targetting the x86-64, x86-64-v2, x86-64-v3 and x86-64-v4
architecture variants.
This commits modifies gen-bootlin-toolchains to support these
toolchains. It should be noted that the description for the x86-64-v3
and x86-64-v4 toolchains are for now the same, as Buildroot doesn't
yet have the options to describe the extra features that x86-64-v4
expects to find on the hardware platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The OpenRISC toolchains have been rebuilt once again, this time with
the _REENTRANT fixed merged in commit
98e39dc80e ("package/gcc: define
_REENTRANT for OpenRISC when -pthread is passed")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog (since 1.1.7):
8b70f08 Add definition of new event GstAppSinkCallbacks for interpipesink element
ddaa9b5 Add conditional build according to GST_VERSION_MINOR
730dea6 Bump project version
8718b12 Add initialization for the GstAppSinkCallbacks struct
f015ff7 Remove redundant initialization of new_event callback
530da92 Update copyright year in README file
e8ce826 Add explanatory comment on the memset of GstAppSinkCallbacks struct
f0f3b8e Fix README copyright date to 2016-2022
814982e Merge branch 'hotfix/add-new-event-callback'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
TinyXML through 2.6.2 has an infinite loop in TiXmlParsingData::Stamp in
tinyxmlparser.cpp via the TIXML_UTF_LEAD_0 case. It can be triggered by
a crafted XML message and leads to a denial of service.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 2.0.4 of the Apache XML Security for C++ has been released,
correcting support for OpenSSL earlier than 1.1.
Version 2.0.3 of the Apache XML Security for C++ has been released,
adding support for OpenSSL 3.0.0.
Drop patch (already in version) and so autoreconf
https://santuario.apache.org/cindex.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lft 3.91 / WhoB 3.91
----------------------
- Fixed bugs.debian.org/cgi-bin/bugreport.cgi?bug=922430
- Updated date
lft 3.9 / WhoB 3.9
----------------------
- Fixed a bug that could indicate a target was closed when it was open
- Improved support for DLT_NULL interfaces on BSD-like operating systems
- Improved deprecated pcap device enumeration method
- Improved GraphViz output format appearance
Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
4.3.2 Oct 7, 2021
- very minor bug. the last command in perfquery is not in a loop and
prevents the collectl daemon from starting via the service.
Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2022-22707: In lighttpd 1.4.46 through 1.4.63, the
mod_extforward_Forwarded function of the mod_extforward plugin has a
stack-based buffer overflow (4 bytes representing -1), as demonstrated
by remote denial of service (daemon crash) in a non-default
configuration. The non-default configuration requires handling of the
Forwarded header in a somewhat unusual manner. Also, a 32-bit system is
much more likely to be affected than a 64-bit system.
gdbm, geoip and memcached options have been dropped with
86c2d30936https://www.lighttpd.net/2022/1/19/1.4.64/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This version dropped support to NFSv2.
Drop patches backported from this release.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Linux config already enabled drm-virtio for graphics output, but not the
corresponding virtio-input / evdev drivers for input or the compatibility fb
option.
Enable them so keyboard/mouse input works and /dev/fb0 is provided.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Linux defconfig both has VT and serial port support, so it makes more
sense to run getty on /dev/console instead of hard coding the serial port.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
vte also provides libvte, a library that can be linked to by other
programs, so install it in staging.
Signed-off-by: Rainer Jonsson <rainbox2k12@msgsafe.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hash of the LICENSING file is modified due to changes in file
paths listed in that file. No impact on the licensing terms.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The FP setting is not used for aarch64 in buildroot. The FPU options are
set implicit.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
5.15.2 is the last public release of 5.15 and does not contain this CVE
fix. However, >=6.1.2 and >5.12.12 all contain the necessary patches so
let's port them to 5.15.2.
Technically only the first two patches are required to patch the CVE.
However, the second patch introduces a regression that is fixed in the third
patch.
The patches are taken from KDE kde/5.15 git branch.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: also change in Config.in]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move rpi-bt-firmware and rpi-wifi-firmware packages to the new
brcmfmac_sdio-firmware-rpi one (as they are the same upstream
package).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- fix check-package
- legacy symbols still depend on arm || aarch64
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- add cypress files
- update links
Chanelog (since 3888ba2):
- Sync with RPi-Distro repo
Switch to "bullseye" branch which moved several firmware files to
the cypress dir.
Add 43438 firmware 7.45.98.118 + external clm_blob
Add 43455 firmware 7.45.241 and clm_blob
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Chanelog (since 3888ba2):
- Sync with RPi-Distro repo
Switch to "bullseye" branch which moved several firmware files to
the cypress dir.
Add 43438 firmware 7.45.98.118 + external clm_blob
Add 43455 firmware 7.45.241 and clm_blob
- README.md: update link to RPi-distro repo wifi firmware files
- Merge pull request #19 from HiassofT/2021-12
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog:
f5404b2 raspicam: Check system is running legacy camera stack
14b90ff mmal: Hack to make mmal core register VideoCore components
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog:
095deea759 kernel: overlays: vc4-kms-v3d: Change composite handling
2e9b609e53c kernel: Bump to 5.10.79
12bc6e36773 firmware: dtoverlay: Rebase aliases in overlays like labels
24d966d35bb kernel: Bump to 5.10.81
ca52e7c1303 kernel: edt-ft5x06 touchscreen fixes
1a0297bfbf7 kernel: Bump to 5.10.82
0a1a871d04c kernel: Fix for IN Token of USB Endpoint 1 stopping occasionally on Pi 4
303d0012cd7 kernel: Bump to 5.10.83
bd8b6d5dc8e kernel: Bump to 5.10.85
56f1b8bbc88 kernel: Bump to 5.10.87
536baf33ae9 kernel: Bump to 5.10.88
ce71e3e9b34 kernel: Bump to 5.10.89
19b570d0d6a firmware: arm-loader: Fix kernel8.img selection on 2837 with arm_64bit=1
fbbde90b709 kernel: drm/vc4: fix non-working audio on RPi3 and no video with DVI
165bd7bc562 firmware: improve firmware camera detection
318e3373496 kernel: Bump to 5.10.90
175984a6dc4 kernel: drm/vc4: Add alpha_blend_mode property to each plane
20c5829b0af kernel: Bump to 5.10.92
3f20b832b27 firmware: arm_loader: Only clip min/max to the same value for turbo clocks
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 593683b45f (package/tpm2-tss: remove unused dependency)
removed the build-time dependency (in the .mk), but forgot to
remove it from the Config.in.
Signed-off-by: Tilman Keskinöz <arved@arved.at>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
Improper handling of URI Subject Alternative Names (Medium)(CVE-2021-44531)
Accepting arbitrary Subject Alternative Name (SAN) types, unless a PKI is
specifically defined to use a particular SAN type, can result in bypassing
name-constrained intermediates. Node.js was accepting URI SAN types, which
PKIs are often not defined to use. Additionally, when a protocol allows URI
SANs, Node.js did not match the URI correctly.
Certificate Verification Bypass via String Injection (Medium)(CVE-2021-44532)
Node.js converts SANs (Subject Alternative Names) to a string format. It
uses this string to check peer certificates against hostnames when
validating connections. The string format was subject to an injection
vulnerability when name constraints were used within a certificate chain,
allowing the bypass of these name constraints.
Incorrect handling of certificate subject and issuer fields (Medium)(CVE-2021-44533)
Node.js did not handle multi-value Relative Distinguished Names correctly.
Attackers could craft certificate subjects containing a single-value
Relative Distinguished Name that would be interpreted as a multi-value
Relative Distinguished Name, for example, in order to inject a Common Name
that would allow bypassing the certificate subject verification.
Prototype pollution via console.table properties (Low)(CVE-2022-21824)
Due to the formatting logic of the console.table() function it was not safe
to allow user controlled input to be passed to the properties parameter
while simultaneously passing a plain object with at least one property as
the first parameter, which could be __proto__. The prototype pollution has
very limited control, in that it only allows an empty string to be assigned
numerical keys of the object prototype.
For details, see the advisory:
https://nodejs.org/en/blog/vulnerability/jan-2022-security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Ghostscript GhostPDL 9.50 through 9.54.0 has a heap-based buffer
overflow in sampled_data_finish (called from sampled_data_continue and
interp).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Ghostscript GhostPDL 9.50 through 9.53.3 has a use-after-free in
sampled_data_sample (called from sampled_data_continue and interp).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2020-13867: Open-iSCSI targetcli-fb through 2.1.52 has weak
permissions for /etc/target (and for the backup directory and backup
files).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2021-4192: vim is vulnerable to Use After Free
Fix CVE-2021-4193: vim is vulnerable to Out-of-bounds Read
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The commit 2f50686401 added a patch for
util-linux, but forgot to create a symlink to util-linux-libs. This
results in inconsistent libblkid.so builds from util-linux and
util-linux-libs.
If you enable BR2_PER_PACKAGE_DIRECTORIES, you will find that different
libblkid.so is used in different
$(BASE_DIR)/per-package/$(PKG)_NAME/target.
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CM4 IO Board is equipped with an on-board RTC connected over I2C,
and has USB 2.0 host ports.
This commit loads the appropriate overlays to enable both. The USB 2.0
interface is by default disabled on CM4 to reduce the power
consumption so it needs to be explicitly enabled on the CM4 IO Board
to use the USB ports.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CM4 IO Board is equipped with an on-board RTC connected over I2C,
and has USB 2.0 host ports.
This commit loads the appropriate overlays to enable both. The USB 2.0
interface is by default disabled on CM4 to reduce the power
consumption so it needs to be explicitly enabled on the CM4 IO Board
to use the USB ports.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CONFIG_DEBUG_BTF_INFO relies on pahole, so kernel DWARF are converted to BTF.
If CONFIG_DEBUG_BTF_INFO is set and BR2_LINUX_KERNEL_NEEDS_HOST_PAHOLE not,
an error message is shown and .config is not written.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pahole is a tool used to show data structure embedded in debugging
information formats like DWARF.
It is notably needed by the Linux kernel to generate BPF Type
Format (BTF) information used by Compile Once - Run Everywhere (CO-RE)
BPF tools.
To be built, pahole needs __LIB to be set to lib at stated in its
README.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The mmc block device number can vary, so passing a mmc block device to
specify the location of the rootfs is not a reliable
approach. Instead, use the root=PARTUUID=<uuid> mechanism, where the
uuid is found by U-Boot.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with introspection:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler gst/rtsp-server/GstRtspServer-1.0.gir --output gst/rtsp-server/GstRtspServer-1.0.typelib --includedir=/usr/share/gir-1.0
Could not find GIR file 'Gst-1.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file gst/rtsp-server/GstRtspServer-1.0.gir: Failed to parse included gir Gst-1.0
If the above error message is about missing .so libraries, then setting up GIR_EXTRA_LIBS_PATH in the .mk file should help.
Typically like this: PKG_MAKE_ENV += GIR_EXTRA_LIBS_PATH="$(@D)/.libs"
Fixes:
- http://autobuild.buildroot.org/results/04af6b22cfa0cffb6a3109a3b32b27137ad2e0b0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A wrapper for the Gnu Privacy Guard (GPG or GnuPG).
The gnupg module allows Python programs to make use of the functionality
provided by the GNU Privacy Guard (abbreviated GPG or GnuPG). Using this
module, Python programs can encrypt and decrypt data, digitally sign
documents and verify digital signatures, manage (generate, list and
delete) encryption keys, using Public Key Infrastructure (PKI)
encryption technology based on OpenPGP.
https://docs.red-dove.com/python-gnupg/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumping the version of systemd is a little more complicated than the
usual package, and it's easy to forget some of the things that need to
be done - and this has happened several times in the past.
Add a checklist of things to worry about when updating systemd.
Note that there are many other complicated packages that also need a lot
of attention when upgrading. However, systemd is a really critical
package so it's more important that we get that one right than, say,
valgrind.
Cc: Norbert Lange <nolange79@gmail.com>
Cc: Jérémy ROSEN <jeremy.rosen@smile.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since at least gdb 7.8, python3 support has been available. As part of
the progressive retiring of python2 support, it is time to drop its
support in gdb by:
- Removing BR2_PACKAGE_HOST_GDB_PYTHON in package/gdb/Config.in.host
and removing the choice to leave just a BR2_PACKAGE_HOST_GDB_PYTHON3
option.
- Adding BR2_PACKAGE_HOST_GDB_PYTHON to Config.in.legacy
- Changing depends on BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3 to
depends on BR2_PACKAGE_PYTHON3 in package/gdb/Config.in
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
commit 0d0f84d200
added the missing host-dtc dependency to riscv-isa-sim.
The spike simulator calls the dtc binary at its startup. The host dtc
command needs to be in the PATH at that time.
This commit add the buildroot host binary directory into the PATH of the
start.sh helper script. It make sure spike will use the buildroot dtc
version. This commit fixes this start.sh script on host not providing
the dtc command. Since the "spike" binary is now in the PATH, the
binary name is also simplified.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit b8aebcfd82 (configs/roseapplypi_defconfig: bump kernel to
5.15.10) adjusted the board to use an ext4 rootfs, but forgot to update the
defconfig to enable ext4 rootfs, breaking the build. Correct that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure on musl raised since bump to version
2.0.0 in commit 3b9c8f8cb5:
In file included from ../src/pcm_hw.c:42:
/home/peko/autobuild/instance-1/output-1/host/i586-buildroot-linux-musl/sysroot/usr/include/sound/asound.h:444:18: error: field 'trigger_tstamp' has incomplete type
444 | struct timespec trigger_tstamp; /* time when stream was started/stopped/paused */
| ^~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/a75e23dc585bd071f4d65face5489ed6ac22edbe
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update README hash for version number change.
Add a patch fixing build with musl.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 0378e2e5d9:
/tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: src/EGL/libEGL.so.1.1.0.p/libegl.c.o: in function `AtomicIncrement':
libegl.c:(.text+0x614): undefined reference to `__sync_add_and_fetch_4'
Fixes:
- http://autobuild.buildroot.org/results/a204953020a714057ec6690e63a3ad8ac621acd5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Import an upstream patch which fixes a typo in the Meson source code
which caused a wrong command line option to be passed to the vapigen
program. This fixes the build for all packages which use Meson and
provide API bindings generated using said tool.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Networkd-dispatcher is a dispatcher daemon for systemd-networkd
connection status changes. This daemon is similar to
NetworkManager-dispatcher, but is much more limited in the types of
events it supports due to the limited nature of systemd-networkd.
To simplify the large number of transitive dependencies, remove the ones
that are implied by glibc.
To simplify the comment, simply don't show it if python is selected.
Python 2 is going to be removed soon anyway.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
[Arnout: add Config.in comment and rework/simplify dependencies]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We changed the skeletons in bf01e51f3c, so that var/lock
points to run/lock. This resulted in build failures as
some packages want to work with these paths.
- Create run/lock, the run directory will be purged
later anyway (since 5e78e7e97d).
- for init == systemd, create the var/lock symlink early
to prevent packages creating this path as directory.
Fixes:
http://autobuild.buildroot.net/results/3ee/3ee8f9ee55e51af38e9dbe7b9840c9589d88a30f
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Rebase patches.
Backport a patch to fix a build error on latest meson.
giscanner/scannerlexer.l license hash change due to add float types:
60b0cf2fc2
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new test ensures that libraries and binaries generated
using Parrot Alchemy build system are correct.
Indeed, the test uses libshdata-stress.
This binary depends on libshdata.
libshdata depends on libfutils and libfutils depends on ulog.
All of these binaries and libraries are built using Alchemy.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The libshdata library provides lock free shared-memory tools.
https://github.com/Parrot-Developers/libshdata
libshdata-stress utility does not compile using static libs
only (BR2_STATIC_LIBS=y). The issue was raised upstream:
https://github.com/Parrot-Developers/libshdata/issues/2
For now, libshdata-stress simply depends on !BR2_STATIC_LIBS.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- do not macro-ify headers install
- do not parameterise static libs install dest
- do not parameterise binaries install dest
- reorder macros decaration and use
- remove spurious comma between module dependencies
- implicit module name
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The libfutils library is a library that contains some common
useful functions (list, hash, time).
https://github.com/Parrot-Developers/libfutils
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- do not macro-ify headers install
- do not parameterise static libs install dest
- reorder macros decaration and use
- implicit module name
- BUILD_CMDS fit on a single line
- LIBFUTILS_TARGET_ENV is all env, not just extra env
- add missing mkdir in shared-libs case
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The ulog library is a minimalistic logging library derived from
Android logger.
https://github.com/Parrot-Developers/ulog
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- do not macro-ify headers install
- do not parameterise static libs install dest
- reordr macros decaration and use
- implicit module name
- BUILD_CMDS fit on a single line
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Alchemy is a build system developed by Parrot.
It is a new build system based on the one used in Android.
A central makefile instance scans a workspace to find user
makefiles, includes them and register modules to be built.
https://github.com/Parrot-Developers/alchemy
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr: implicit package name with $($(PKG)_NAME)]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
xdg SELinux module is needed to avoid the following build failure raised
since bump of refpolicy to version 2.20220106 in commit
f6691d122c and
64e637d895:
policy/modules/services/git.te:121:ERROR 'attribute xdg_config_type is not declared' at token ';' on line 115358:
typeattribute git_xdg_config_t xdg_config_type;
#line 121
checkpolicy: error(s) encountered while parsing configuration
Rules.monolithic:78: recipe for target 'policy.30' failed
Fixes:
- http://autobuild.buildroot.org/results/98d5b3db313000855721c0ad994951fe8cc781c0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2022.01 and kernel to 5.15.13.
After the conversion to U-Boot device model, the SD card is
device '1', so change the boot script accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Recent commit b7a00b39bc (package/glibc: force -fno-lto) only catered
for glibc, but all C libraries, like musl, are impacted, for very
similar reasons.
Disable LTO unconditionally for musl too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Recent commit b7a00b39bc (package/glibc: force -fno-lto) only catered
for glibc, but all C libraries, like uClibc-NG, are impacted, for very
similar reasons.
Disable LTO unconditionally for uClibc-NG too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 4.8 raised since bump to
version 2.28.0 in commit 0f8aab08e7:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/mbedtls-2.28.0/library/bignum.c: In function 'mpi_select':
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/mbedtls-2.28.0/library/bignum.c:1994:5: error: 'for' loop initial declarations are only allowed in C99 mode
for( size_t i = 0; i < T_size; i++ )
^
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/mbedtls-2.28.0/library/bignum.c:1994:5: note: use option -std=c99 or -std=gnu99 to compile your code
Fixes:
- http://autobuild.buildroot.org/results/56ac0a8726d09eed8f45f865934fa7781a0e667a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since commit
bf4cf9de83:
In file included from aria_simd.cpp:18:0:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/lib/gcc/arm-none-linux-gnueabi/4.8.3/include/arm_neon.h:32:2: error: #error You must enable NEON instructions (e.g. -mfloat-abi=softfp -mfpu=neon) to use arm_neon.h
#error You must enable NEON instructions (e.g. -mfloat-abi=softfp -mfpu=neon) to use arm_neon.h
^
Fixes:
- http://autobuild.buildroot.org/results/e4fd947c118174a4fad62cbed18816f02d39ec25
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since commit
bf4cf9de83:
In file included from seckey.h:11,
from 3way.h:10,
from 3way.cpp:5:
misc.h:1528:6: error: 'wstring' in namespace 'std' does not name a type
1528 | std::wstring StringWiden(const char *str, bool throwOnError = true);
| ^~~~~~~
In file included from seckey.h:11,
from 3way.h:10,
from 3way.cpp:5:
misc.h:14:1: note: 'std::wstring' is defined in header '<string>'; did you forget to '#include <string>'?
13 | #include "smartptr.h"
+++ |+#include <string>
14 | #include "stdcpp.h"
Fixes:
- http://autobuild.buildroot.org/results/174fe03da7a40dd152703de93af6a213d9cac698
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1ba85b7f87 (support/download: add explicit no-hash support)
introduced the 'none' hash type, in an attempt to make hash files
mandatory, but not failing on archives localy generated, like those
for git or svn repositories, especially for those packages where a
version choice was present, which would allow for either remote
archives for which we'd have a hash or VCS trees for which we could
not have a hash for the localy generated archive.
Indeed, back in the time, we did not have a mean to generate
reproducible archives, so having a hash file without a hash for
thosel ocally generated archives would trigger an error in the
hash-checking machinery.
But now, low-and-behold, we do know how to generate those archives,
and we have a mechanism to explicitly exclude some archives from being
hash-checked (e.g. when the version string itself can be user-provided).
As such, the 'none' hash type no longer has any raison d'être, we do not
use it in-tree, and its use in a br2-external tree is most probably
inexistent (as is the use of hash files alotgether most probably).
So we simply drop the support for that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: drop support in checkpackagelib, as reported by Ricardo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PPC970 processors are well supported by the QEMU pseries and macbook
machines. The latest debian 11 (big endian) runs with SMP. Re-add
support.
Fixes: efc67deef3 ("qemu: remove support for some PowerPC processors in host qemu")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Bamboo board is an evaluation board for PowerPC 440EP CPUs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PowerNV is the platform using the OPAL [1] firmware on OpenPOWER
systems. OPAL first loads a kernel and an initramfs image based on
buildroot including a second boot loader petitboot [2]. The latter
does device discovery and kexecs a new Linux image from disk or
network.
QEMU implements PowerNV machines [3] for the POWER8, POWER9 and
Power10 processors which are used for dev and tests. POWER8 images
being compatible with POWER9 and Power10, simply add a single
qemu_ppc64le_powernv8 board for all.
The QEMU script boots directly from a nvme disk because it is simple
enough but a real system would boot from a ramfs first.
[1] https://github.com/open-power/skiboot/blob/master/doc/overview.rst
[2] https://github.com/open-power/petitboot/
[3] https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following musl build failure raised since bump to version 5.15.1
in commit 20181c3f1b:
In file included from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:4,
from ./kerncompat.h:31,
from common/utils.c:42:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:7:8: error: redefinition of 'struct sysinfo'
7 | struct sysinfo {
| ^~~~~~~
In file included from common/utils.c:27:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here
10 | struct sysinfo {
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/16f44fb9dea72a7079e8e5517e760dd79d2724cc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 5.14.x series is now EOL, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: actualyl drop it from the choice list]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
While currently there is no in-tree Buildroot package which depends on
host-python-greenlet, we (Adder Technology) have some proprietary
modules that use it as part of their builds.
I've tested python-greenlet as host package and confirmed that it builds
and works correctly. Someone else might require it, so I'm proposing its
inclusion.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
JSON parser are usually rather strict when parsing their input. Both
jq and the python json module choke on non-conformant inputs.
Commit e4c284e6b9 (package/pkg-utils: escape \ in generated legal-info)
fixed the \-escaping case, but we want to ensure that we do not have
other data that would be improperly encoded.
To more easily catch issues, also run show-info and send its output
through jq, to try and validate the output.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
squid needs threads and
7dba4ac446
to avoid the following build failure raised since
bump to version 5.3 in commit efc07b7a18:
ntlm_fake_auth.cc: In function 'int main(int, char**)':
ntlm_fake_auth.cc:187:18: error: 'std::this_thread' has not been declared
187 | std::this_thread::sleep_for(std::chrono::milliseconds(response_delay));
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/2aabc8375d41ad4d047d20ff8ee4fe1c978e7ee1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable ASM as already done in mbedtls package to avoid the following
build failure raised since commit
4e36e8f208:
In file included from /home/buildroot/autobuild/instance-2/output-1/build/hiawatha-11.1/mbedtls/library/bignum.c:41:
/home/buildroot/autobuild/instance-2/output-1/build/hiawatha-11.1/mbedtls/library/bignum.c: In function 'mpi_mul_hlp':
/home/buildroot/autobuild/instance-2/output-1/build/hiawatha-11.1/mbedtls/library/bn_mul.h:86:13: error: the register 'hi' cannot be clobbered in 'asm' for the current target
86 | #define asm __asm
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/5436b44777c5d417ae427b99602f516fd8f9489d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
hiawatha is unconditionally using mbedtls since bump to version 11.1 in
commit 24e4c888c3 (e.g. wigwam.c includes
"mbedtls/md5.h")
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-distro provides information about the OS distribution it runs on,
such as a reliable machine-readable ID, or version information.
It is the recommended replacement for Python's original
platform.linux_distribution function (removed in Python 3.8). It also
provides much more functionality which isn't necessarily Python bound,
like a command-line interface.
https://github.com/nir0s/distro
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since 2016, Cypress is in charge of supporting old Broadcom wireless
chips and producing new ones. Newer firmwares for now come with
a different license and have anoter location in a package.
Now, most of Broadcom FullMac firmwares in brcm/ directory should now
be just symlinks to the corresponding files in cypress/ directory.
Respectively, it also makes sence to autoselect corresponding CYPRESS
options if user selectes BRCM wireless stuff.
This patch was created as a result of investigation the issue with
broken wireless support for such popular boards as Raspberry Pi Zero W
and BananaPi M2 Zero.
Signed-off-by: Uladzimir Bely <wiselord1983@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If BR2_PACKAGE_HIDAPI is selected, add it to avrdude build
dependencies.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
zoned depends on kernel >= 5.10:
d4b4baf312
Fix the following build failure raised since bump to version 5.15.1 in
commit 20181c3f1b:
checking linux/blkzoned.h usability... yes
checking linux/blkzoned.h presence... yes
checking for linux/blkzoned.h... yes
checking for struct blk_zone.capacity... no
checking for BLKGETZONESZ defined in linux/blkzoned.h... yes
configure: error: linux/blkzoned.h does not provide blk_zone.capacity
Fixes:
- http://autobuild.buildroot.org/results/381c7e8b4bfa624c3eca3ce072cfa412aba57f84
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Due to a namespace clash with python-build we need to use a different
package name.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix AVRDUDE_VERSION so that it matches what is returned by
release-monitoring.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
glibc requires compilation barriers between files, and will fail with
LTO enabled.
So force LTO off by appending -fno-lto to the flags, but only if the GCC
version is recent enough that an LTO build would be possible.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The seperation of the fields in the hash file should be 2 spaces for
consistency.
Since a large number of hash files still violate this rule, exclude it
from "make check-package" (and thus from CI).
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout:
- Move it to a separate class, so it can be excluded.
- Exclude it from "make check-package"
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 4dff1be05e (package/libvirt: libvirtd needs C++ for nmap-ncat)
introduce a recursive dependency (really: a circular dependency):
package/busybox/Config.in:33:error: recursive dependency detected!
package/busybox/Config.in:33: symbol BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is selected by BR2_PACKAGE_EBTABLES_UTILS_SAVE
package/ebtables/Config.in:11: symbol BR2_PACKAGE_EBTABLES_UTILS_SAVE depends on BR2_PACKAGE_EBTABLES
package/ebtables/Config.in:1: symbol BR2_PACKAGE_EBTABLES is selected by BR2_PACKAGE_LIBVIRT_DAEMON
package/libvirt/Config.in:44: symbol BR2_PACKAGE_LIBVIRT_DAEMON depends on BR2_PACKAGE_NETCAT_OPENBSD
package/netcat-openbsd/Config.in:1: symbol BR2_PACKAGE_NETCAT_OPENBSD depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
As usual with this kind of circular depednency, it is not trivial to see
what the real cuplrit is, or where to cut the circle.
A simple solution in this case is to drop the C++ dependency, and switch
the netcat-openbsd and nmap-ncat dependencies conditions.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, host-gtest does not actually build and install gtest
libraries or header files; it just installs the gmock_gen stuff.
Host gtest can however be used by packages to build and run their
unit-tests natively.
This patch will now build and install gtest to the host like a normal
cmake package.
To limit the disruption for existing users of host-gtest, the gmock_gen
stuff is still installed (as a post-install hook now).
Signed-off-by: Paul Soucy <paul.soucy@sense.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since commit
fbf25acfbf:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_NMAP
Depends on [n]: BR2_INSTALL_LIBSTDCPP [=n] && BR2_USE_MMU [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y]
Selected by [y]:
- BR2_PACKAGE_LIBVIRT_DAEMON [=y] && BR2_PACKAGE_LIBVIRT [=y] && !BR2_PACKAGE_NETCAT_OPENBSD [=n]
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: C++ only needed without NETCAT_OPENBSD]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes for the following defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_VULKAN_DRIVER_INTEL=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
this warning:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_MESA3D_GBM
Depends on [n]: BR2_PACKAGE_MESA3D [=y] && BR2_PACKAGE_MESA3D_DRIVER [=y] && (BR2_PACKAGE_MESA3D_DRI_DRIVER [=n] || BR2_PACKAGE_MESA3D_GALLIUM_DRIVER [=n] && BR2_PACKAGE_MESA3D_OPENGL_EGL [=y])
Selected by [y]:
- BR2_PACKAGE_MESA3D_OPENGL_EGL [=y] && BR2_PACKAGE_MESA3D [=y] && BR2_PACKAGE_MESA3D_DRIVER [=y]
WARNING: unmet direct dependencies detected for BR2_PACKAGE_MESA3D_GBM
Depends on [n]: BR2_PACKAGE_MESA3D [=y] && BR2_PACKAGE_MESA3D_DRIVER [=y] && (BR2_PACKAGE_MESA3D_DRI_DRIVER [=n] || BR2_PACKAGE_MESA3D_GALLIUM_DRIVER [=n] && BR2_PACKAGE_MESA3D_OPENGL_EGL [=y])
Selected by [y]:
- BR2_PACKAGE_MESA3D_OPENGL_EGL [=y] && BR2_PACKAGE_MESA3D [=y] && BR2_PACKAGE_MESA3D_DRIVER [=y]
as BR2_PACKAGE_MESA3D_VULKAN_DRIVER selects BR2_PACKAGE_MESA3D_DRIVER which
enables possible selection of BR2_PACKAGE_MESA3D_OPENGL_EGL selecting
BR2_PACKAGE_MESA3D_GBM.
Selecting EGL with only a vulkan driver selected gives the following configure
failure:
.../build/mesa3d-20.3.2/meson.build:424:4: ERROR: Problem encountered: EGL requires dri
Note dri means here an dri or gallium driver (see meson.build and look
for with_dri).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout: convert if to depends]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
sasl depends on libsasl2 (https://github.com/cyrusimap/cyrus-sasl) which
is not packaged yet in buildroot and will result in the following build
failure raised since commit fbf25acfbf:
output/build/libvirt-7.7.0/meson.build:1212:2: ERROR: Dependency "libsasl2" not found, tried pkgconfig
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since version 21.3.0 of mesa3d, the generic broadcom infrastructure
(which is called v3d but is used also for VC4) started using NEON
instructions. This leads to assembler failures when VC4 is built for
32-bit ARM without NEON:
FAILED: src/broadcom/libv3d_neon.a.p/common_v3d_tiling.c.o
/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc [...] -c ../src/broadcom/common/v3d_tiling.c
/tmp/ccAvufNv.s: Assembler messages:
/tmp/ccAvufNv.s:602: Error: selected processor does not support `vldm r7,{q0,q1,q2,q3}' in ARM mode
[...]
/tmp/ccAvufNv.s:686: Error: selected processor does not support `vstm r7,{q0,q1,q2,q3}' in ARM mode
Let the VC4 driver depend on NEON for 32-bit ARM. Aarch64 always has
NEON, so no condition is needed there.
Fixes:
http://autobuild.buildroot.net/results/2b5/2b531f7aa4506ee31a7252c87a2e401fffab9dfb/http://autobuild.buildroot.net/results/6f9/6f9e7c864808dc0fafbca7c8984651fe92edbaf2/
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
support/scripts/pkg-stats:1171:8: E713 test for membership should be 'not in'
support/scripts/pkg-stats:1175:8: E713 test for membership should be 'not in'
support/scripts/pkg-stats:1179:8: E713 test for membership should be 'not in'
3 E713 test for membership should be 'not in'
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1955772278
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit eb49354eb3 updated systemd's
minimal kernel headers version to 3.13, but forgot to update the
dependencies of BR2_INIT_SYSTEMD.
Update BR2_INIT_SYSTEMD kernel headers dependency to 3.13.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add mysql_config to MARIADB_CONFIG_SCRIPTS, this won't fix any build
failure at the moment but will avoid possible issues in the future
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable MBEDTLS_FATAL_WARNINGS to avoid the following build failure
since bump to version 2.28.0 in commit
0f8aab08e7:
/home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/features.h:412:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
412 | # warning _FORTIFY_SOURCE requires compiling with optimization (-O)
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/af017382bb5772de7383d71ed7b8af44717981f9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is possible to build the vulkan intel driver without X11/GLX.
- remove xorgproto dependency; it is already given via
BR2_PACKAGE_MESA3D_OPENGL_GLX/BR2_PACKAGE_MESA3D_NEEDS_X11 and was
already gone from the .mk file
- enable DRI3 automatically when X11 is enabled, like we do for other
drivers
- libxshmfence is implied by DRI3 (both in Config.in and mesa3d.mk), but
we need to propagate dependencies (RISCV_32 doesn't apply since it's
x86 only)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout: select DRI3 like other drivers though, which simplifies the
whole thing]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When the BR2_PACKAGE_SYSTEMD_TMPFILES was removed, it was added to
Config.in. The idea was to warn users who use the symbol in their
br2-external.
However, most users don't have a br2-external that uses this symbol.
Since the symbol defaults to y when systemd is enabled, they'll get this
legacy warning - which is completely meaningless for them since nothing
changes.
The annoyance of the many is worse than the possible unexpected change
for the few. And anyone actually relying on BR2_PACKAGE_SYSTEMD_TMPFILES
will probably easily discover the issue in testing (e.g. because the
tmpfiles conf is missing in the target).
Therefore, remove BR2_PACKAGE_SYSTEMD_TMPFILES from Config.in.legacy.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When libglvnd is enabled, mesa3d must be told so, so as it installs its
libraries with the vendor suffix (e.g. libEGL_mesa.so instead of
libEGL.so).
Additionally, the provider (in Buildroot parlance) is libglvnd, not mesa3d.
Signed-off-by: Jakub Skrzypnik <jskrzypnik@novomatic-tech.com>
[yann.morin.1998@free.fr:
- don't override the _PROVIDES variable, only assign when needed
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libglvnd is the GL Vendor-Neutral Dispatch library, used to dispatch
GL calls across multiple GL implementations at runtime.
Full GL support, as usual, requires (parts of) the X11 stack: libX11,
libXext, and xorgproto (for glproto). However, with just libX11, it is
possible to do EGL on X11. EGL and GLES have no dependencies.
Note: x11 and glx are 'features', so need to be 'enabled' or 'disabled'
(or 'auto', but we don't care in Buildroot), while egl and gles1/2 are
'booleans', so need to be 'true' or 'false'.
When an actual provider for GL, EGL, or GLES is enabled, so must the
corresponding flavour be enabled in libglvnd. Conversely, when there is
no actual provider, the corresponding support must be disabled in
libglvnd. So we make each flavour selectable with hidden options, which
actual providers will have to select.
The license for libglvnd itself is a custom license by NVidia. It is
pretty close to MIT, but it's different (although Debian does classify
it as MIT); SPDX has no identifier for that license either. As such, we
choose to just identify it as 'libglvnd license', and let users deal
that with their legal department. Additionally, libglvnd bundles some
code from other projects, so we list them explicitly as well.
Signed-off-by: Jakub Skrzypnik <jskrzypnik@novomatic-tech.com>
[yann.morin.1998@free.fr:
- provide help text
- don't force X11 libraries, split them between X11 and full GL
- make each flavour selectable
- fix make check-package issues
- fix and complete licensing information
- bump to 1.3.2
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When debugging pkg-stats, it's quite useful to be able to disable some
features that are quite long (checking upstream URL, checking latest
version, checking CVE). This commit adds a --disable option, which can
take a comma-separated list of features to disable, such as:
./support/scripts/pkg-stats --disable url,upstream
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The .affects() method of the CVE class in support/scripts/cve.py can
return 3 values: CVE_AFFECTS, CVE_DOESNT_AFFECT and CVE_UNKNOWN.
We of course properly account for CVEs where .affects() return
CVE_AFFECTS, but the ones for which CVE_UNKNOWN is returned are
currently ignored, and therefore treated as if they did not affect the
package.
However CVE_UNKNOWN in fact indicates that the v_start/v_end fields of
the CPE entry could not be parsed by
distutils.version.LooseVersion(). Instead of ignoring such cases, this
commit adds support for the concept of "unsure CVEs", which will be
listed next to CVEs known to affect the package, so that we are aware
of them and can investigate the version issue.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Many applications that use GLX want to combine it with DRI3 to bypass
the X server and send GL commands directly to the graphics driver. This
is only available in mesa3d if glx-direct=true.
Up to now, we only enabled glx-direct when a DRI driver was enabled.
Historically, this is either because only DRI drivers had DRI3, or
because we didn't know better at the time. However, glx-direct is not
related to DRI drivers at all. Setting it for a DRI driver when there is
no GLX is effectively a NOP. Conversely, we also want to set it for
Gallium drivers when GLX is enabled, otherwise GLX-direct applications
don't work.
Note that glx-direct is only functional if glx=dri. If glx=xlib or
glx=gallium-xlib, GLX always goes through the X server so direct is not
possible (as far as we understand).
Set glx-direct=true unconditionally when GLX is selected. Remove it from
DRI drivers.
Reported-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Although the Gallium V3D driver for RPi4 can be built independently, in
practice the accelaration doesn't work unless the VC4 driver is also
enabled.
Select VC4 automatically when V3D is selected.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
hiawatha needs mbedtls3 since bump to version 11.1 in commit
24e4c888c3:
/home/giuliobenetti/autobuild/run/instance-3/output-1/build/hiawatha-11.1/src/wigwam.c:39:10: fatal error: mbedtls/psa_util.h: No such file or directory
39 | #include "mbedtls/psa_util.h"
| ^~~~~~~~~~~~~~~~~~~~
As mbedtls 3.x is not backward compatible with mbedtls 2.x, disable
system mbedtls to let hiawatha uses its own copy (which will be
installed in $(TARGET_DIR)/usr/lib/hiawatha)
Fixes:
- http://autobuild.buildroot.org/results/064af90aa95c28781d96d7eca0f14841fce0687a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are not passing TARGET_CONFIGURE_OPTS when building busybox; instead
we are passing variables explicitly. As thus, it is missing the ar, nm,
and ranlib that we are using.
We add explicit AR, NM, and RANLIB, so that the ones we want to use
(i.e. the gcc-wrapped ones) are actually used.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- reword the commit log to explain why we need that
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This will use gcc-ar, gcc-nm and gcc-ranlib instead of the normal
binutils tools. The difference is that with the wrappers, gcc plugins
will be automatically picked up.
gcc 4.7 introduced these wrappers, to detect the prefix and keep gcc
specifics out of Makefile.in, a new variable BR2_TOOLCHAIN_BUTILS_PREFIX
will be used to carry the prefix on supported versions.
Note that binutils added some automatic loading with the 'bfd-plugins'
directory (somewhere around 2.28), but the first implementation had
issues, and generally depends on correctly setup symlinks (often broken,
may point to some other gcc's library). The wrappers always work
painless.
The original motivation (now ~2 years in use) was to add "-flto
-ffat-lto-objects" to both BR2_TARGET_OPTIMIZATION and
BR2_TARGET_LDFLAGS, and have target binaries lto optimized.
Not all packages will compile with this option, further work could
white/blacklist packages (adding -fno-lto to the options).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr: don't introduce a Config.in blind option]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Updated language training data version to 4.1.0
- Removed current patch as not required anymore
- Added patch to fix uclibc failures
- Supported C++ version has moved from C++11 to C++17
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
add the missing user if oomd is enabled.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Especially for read-only filesystems it is helpful to
pre-create all folders for non-volatile paths.
This needs to run under fakeroot to allow setting
uids/gids/perms for the target fs.
systemd-tmpfilesd supports specifiers and target rootfs,
but some specifiers resolve to information from the host,
it is necessary to specially handle (skip) entries that
contain problematic specifiers.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-setuptools-scm dropped python 2 support since
f0be71fbcf
resulting in the following build failure since bump to version 6.3.2 in
commit 12e3527fd9:
/buildroot/autobuild/instance-2/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /home/buildroot/autobuild/instance-2/output-1/host/bin/python setup.py build )
File "setup.py", line 22
f"{type(self).__name__} is forbidden, "
^
Fixes:
- http://autobuild.buildroot.org/results/2f6125993de364b4a44d259f16806e6dfd792402
With python 2 support dropped, python-backports-functools-lru-cache can no
longer be built, so drop it.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Together with changes to sysv/busybox init, this directory
will already exist on all init systems before any service
scripts are run.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
systemd's own configuration file is not installed anymore,
as side effect of disabling sysv support in commit
96f0d9969e.
Add the legacy.conf functionality back in skeleton-init-systemd,
since this is a buildroot feature to support software expecting
these directories to exist, as well as trying to be similar to
other init systems.
Create our own legacy.conf instead of using the one from upstream,
because:
- upstream has legacy.conf.in which has to be preprocessed;
- we don't want to enable upstream's full sysv support as explained in
commit 96f0d9969e6220154b39d9d80cda97998d41f670;
- we would probably need to post-process upstream's legacy.conf anyway
since it doesn't fully match with buildroot expectations.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since tmpfiles is no longer optional, the Config.in symbol serves no
purpose. It was only used in cryptsetup.mk, where we replace it with
BR2_PACKAGE_SYSTEMD.
Advise to do the same in Config.in.legacy.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
this tool and service is pretty much expected to be enabled,
making this a certainty will enable future improvements.
The config variable BR2_PACKAGE_SYSTEMD_TMPFILES is still
availabe and always set.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This modifies the order of the nss modules, reflecting the current
state of the documentation.
nss-mymachines lost support for resolution of users and groups,
and now only does resolution of hostnames. Changed in v246.
Multiple changes in regards to nss-myhostname now recommend placement
after nss-files and before nss-dns. See commits ce266330, f918c67.
nss-resolve handles the nss-files logic itself, and its suggested to
move in front of nss-files. Changed in v249.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
realign the configuration to the README.
enable CONFIG_AUTOFS_FS (kernel >= 4.18) as well as the someday
to be removed CONFIG_AUTOFS4_FS option.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Use the unified hierarchy, which is systemds default since v243.
The biggest holdover was docker which now supports the unified
layout.
Note that systemd will automatically fallback to hybrid if the
kernel is too old or the unified hierarchy fails for other reasons.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version bump requires significant changes because
python-cryptography is now partially implemented in Rust.
This means that:
- The C++ dependency is no longer needed.
- We need to ensure we are on an architecture where Rust is
available (BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS)
- Almost all Python dependencies are no longer relevant, except for
the python-cffi.
- A number of environment variables are needed to make the Rust part
build correctly.
- We need to invoke the "cargo" download post-process hook to vendor
the Cargo dependencies at download time.
- We need to propagate to relatively significant reverse dependency
tree the changes of dependencies on python-cryptography.
Co-developed-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will allow PKG_CARGO_ENV to be used in other contexts, such as
the upcoming python-cryptography version bump.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This should be more reliable and fix the host == target bug when
doing indirect invocations using the cargo env.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some variables should only be passed for target packages, such as the
target-applies-to-host variable. Additional target-specific variables
will also be added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In a follow-up commit, we are about to bump python-cryptography to a
new version, which has the interesting charateristic of using Rust
code. This means python-cryptography will now only be available on
platforms supported by Rust, which for now excludes uclibc-based
configurations (none of the Rust Tier1/Tier2 platforms use uClibc,
there is some uClibc support in Tier3 platforms but they have not been
added to Buildroot for now).
So in preparation for this bump, we switch the few test cases of
Python packages that directly or indirectly use python-cryptography to
use a glibc toolchain. Another impacted test case is the
docker-compose test case, but it already uses a glibc toolchain;
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In most pure Rust packages, the Cargo.toml manifest is at the root
directory, which is why we could call "cargo vendor" without
specifying the path of the manifest.
However, other packages, such as python-cryptography, which have parts
implemented in Rust, have their Cargo.toml located in a specific
subdirectory.
This commit extends the cargo-post-process download script to
understand a BR_CARGO_MANIFEST_PATH environment variable, which allows
a package to pass the location of the Cargo.toml file. If not passed,
"Cargo.toml" is used, preserving the existing behavior for other
packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We already have support for a wide range of x86-64 CPUs, but we don't
have any option to build for the most generic possible x86-64 CPU, as
made available by the -march=x86-64 GCC option.
This commit makes this option available in Buildroot.
It only really makes sense to use as a 64-bit CPU, and not as a 32-bit
one, so we guard it behind BR2_x86_64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: it's an x86-64-only CPU]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Linux distros changed /var/run and /var/lock to reside on an tmpfs in
/run a long time ago, and buildroot seems to agree by providing this
tmpfs on all supported init systems.
Packages on the other hand are currently free to either use /var/run
or /run, and similarly using /var/lock should be identical to the
replacement /run/lock.
This series aims to ensure that *if* /var/lock is needed, then
it will be a symlink to /run/lock. Allowing packages to continue
working and allowing them to migrate to using /run/lock.
If all relevant packages are fixed,
the compatibility symlinks in /var can be dropped.
Status before this patch:
* Systemd
/run will be mounted by PID1, /var/run will be recreated by
/usr/lib/tmpfiles.d/var.conf.
Creating /run/lock/subsys and the compatibility symlink is handled
in /usr/lib/tmpfiles.d/legacy.conf.
But this is *currently not installed* by Buildroot, see [1].
* OpenRC
Seems to check for existence of a /run directory and does all
necessary setup.
* SysV
/var/lock is currently a symlink to /tmp.
* Busybox
Same as sysv (Buildroot uses the sysv skeleton)
Note that we create /run/lock/subsys, so sysv scrips could expect this
directory to exist. Apart from simplifying scripts, creating the dir
early as root adds some security.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This breaks the post_process_unpack() function in
support/download/helpers, which had a sequence of pipe, with "head"
that can abort early and cause the pipe to fail.
Fixes intermitent:
make[1]: *** [package/pkg-generic.mk:190: /builds/tpetazzoni/buildroot/test-output/TestDockerCompose/build/containerd-1.5.8/.stamp_downloaded] Error 141
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
At run time, /run and /tmp get overmounted with a tmpfs, so anything
that is there becomes inaccessible.
Scripts in the fakeroot environment could call tools preparing the early
environment, leaving traces in /run or /tmp. For example, mkusers might
create home directories in /run: openssh sets the sshd home directory to
/run/sshd, so mkusers creates it. But since a tmpfs is mounted over it,
it doesn't exist at runtime, so the openssh service creates it at
startup (and deletes it when the service is stopped).
In addition, packages or rootfs overlay may leave things there as well.
Those may actually pose a runtime problem because the created file or
directory is missing - or it may not be a problem because the package
creates the missing files/directories on startup. In this situation,
it's better not to have them in the rootfs image (because they're not
functional anyway), but it's good to leave them in TARGET_DIR to make it
easier to debug the situation.
Therefore, remove the contents of /run and /tmp in the fakeroot
environment after ROOTFS_PRE_GEN_HOOKS, so they are still left in
TARGET_DIR.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is a complete rewrite of the Inadyn start script, based on
the BusyBox S01syslogd template. Additional features, compared to the
template, are limited to the ability to:
- Check if enabled, using an ENABLED="yes" from /etc/default/inadyn,
this for compatibility with the previous version of the script
- Override INADYN_ARGS from /etc/default/inadyn
- A reload command that sends SIGHUP, since that works and is both
quicker and a less resource intensive operation
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
journald supports catalog files, or rather a binary database of
those.
Functionality added includes:
- A config option allows enabling the binary database.
- If BR2_ENABLE_LOCALE_PURGE is enabled, the catalogs not in the
language whitelist are deleted first. This is done independently
of the new option, since the catalogs are removed later anyway.
- If the option is enabled, the database is built and moved to
/usr/share/factory. This makes sure that /usr contains the entire
system. A symlink is created in /var pointing to that file.
- The catalog source files are deleted. They serve no purpose on the
target once the database exists.
- All of the above is done in a ROOTFS_PRE_CMD_HOOK rather than in the
build/install step, because other packages than systemd itself may
also install catalogs. This also makes sure that it is possible to
do a re-build, because the catalog files are not removed in
$(TARGET_DIR) itself, only in the temporary copy for rootfs creation.
- The service normally used for creating the DB during boot is
deleted. If the DB is not enabled, we also don't want to waste time
and space on re-generating every boot. Conversely, if the DB is
enabled, it is already there so doesn't need to be re-done on every
boot either.
The new option depends on !BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW because
if the rootfs is not RW, /var is overmounted with a tmpfs. The factory
should handle this, but this only half-works [1].
[1] http://lists.busybox.net/pipermail/buildroot/2020-July/287016.html
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This appears to have been incorrectly removed in:
03aa3e6ac7
Fixes:
package/pkg-utils.mk:212: *** unterminated call to function 'foreach': missing ')'. Stop.
make: *** [Makefile:84: _all] Error 2
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This library provides message digest functions found on BSD systems
either on their libc (NetBSD, OpenBSD) or libmd (FreeBSD, DragonflyBSD,
macOS, Solaris) libraries and lacking on others like GNU systems.
https://www.hadrons.org/software/libmd/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The host variant of python-packaging was added in commit
4cc445fd5f, but has two missing things:
- It's a python3 only package, so it should have
HOST_PYTHON_PACKAGING_NEEDS_HOST_PYTHON = python3
- It depends on the pyparsing module, so it should have a dependency
on it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds the gocryptfs encrypted FUSE filesystem.
Currently uses without_openssl build tag, to use the native Go cryptography.
However, the package could be improved by conditionally enabling openssl if it
is also configured to be built by Buildroot.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a Go package that needs vendor modules to be downloaded at
build time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Christian Stewart <christian@paral.in>
This reverts commit d19077677f, but the
package now uses the cargo-package infrastructure with its vendoring
mechanism, which allows us to avoid the problems that caused the
package to be removed in d19077677f.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit converts the ripgrep package to the cargo
infrastructure. This causes the vendoring mechanism to kick in, which
changes the contents of the tarball. To avoid a clash on the hash, we
change the version of ripgrep to the Git commit hash matching the
13.0.0 tag, so there are no functional changes, but the tarball name
is different.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot manual was already providing some details on how to
integrate Cargo packages, and those details now need to be updated
with a proper documentation for the cargo-package infrastructure, as
well as updates related to vendoring support, which affects how
dependencies are handled.
In addition, now that we have vendoring support for Cargo packages,
let's rewrite the dependency management section in a more accurate
way.
We drop the part about the local cache of the registry, because
+CARGO_HOME+ in Buildroot points to $(HOST_DIR)/share/cargo, which is
not shared between builds nor preserved accross builds, so its effect
as a cache is limited.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Thomas: numerous updates and extensions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to be package agnostic, the install phase is now using cargo
instead of install. TARGET_CONFIGURE_OPTS is now also set when running
cargo in order to support cross compiling C code within cargo.
This commit also adds support/download/cargo-post-process to perform
the vendoring on Cargo packages.
The <pkg>_LICENSE variable of cargo packages is expanded with ",
vendored dependencies licenses probably not listed" as currently for
all packages, the licenses of the vendored dependencies are not taken
into account.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Thomas: add support for host-cargo-package and vendoring]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit introduces the download post-process script
support/download/go-post-process, and hooks it into the Go package
infrastructure.
The -modcacherw flag is added to ensure that the Go cache is
read/write, and can be deleted properly upon "make clean".
The <pkg>_LICENSE variable of golang packages is expanded with ",
vendored dependencies licenses probably not listed" as currently for
all packages, the licenses of the vendored dependencies are not taken
into account.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For now, the download post-process logic uses mk_tar_gz, which repacks
a tarball compressed with gzip. So we can only accept as input a
tarball also compressed with gzip. To enforce that, this commit
changes post_process_unpack() to use tar xzf. This makes sure that if
a tarball compressed with something else than gzip gets used, it will
bail out and we will notice.
Support for other compression schemes can be added later on.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without stack-protector raised since
bump to version 02092020 in commit
ebe808ac40 and
caa4408eb4:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: ../src/.libs/libsafec-3.6.0.a(safe_mem_constraint.o): in function `handle_mem_bos_chk_warn':
safe_mem_constraint.c:(.text+0x40): undefined reference to `__stack_chk_guard'
If stack-protector is enabled in the Buildroot config, the toolchain
wrapper will make sure it is used, so there's no need for the safeclib
configure to handle it.
Fixes:
- http://autobuild.buildroot.org/results/a481ee2d26a094358b0298617cce691be3077f22
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: add comment explaining why this is done]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
file-5.41 uses AC_PROG_CC, and was generated with autoconf 2.69. That
oldish version of autoconf does not check the C standard when AC_PROG_CC
is called, and standard-specific macros must be called instead:
AC_PROG_CC_C89, AC_PROG_CC_C99, or AC_PROG_CC_STDC.
So we would need to patch configure.ac to call either of those options,
and then we'd have to autoreocnf.
However, that would autoreconf with our autoconf, version 2.71. In that
version, AC_PROG_CC always check what C standards are available and sets
the appropriate ac_cv_XXX variables, and the previous macros,
AC_PROG_CC_C89, AC_PROG_CC_C99, and AC_PROG_CC_STDC are deprecated.
So it turns out that we just need to autoreconf.
Fixes:
- http://autobuild.buildroot.org/results/9e7868be00f2cd18205b2ce664be95f8b9e2b063
- http://autobuild.buildroot.org/results/31cbc313fceb84c0cbb1969fca5ac44244871dbc
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
sdbus-c++ is a high-level C++ D-Bus library for Linux.
Signed-off-by: Sergey Bobrenok <bobrofon@gmail.com>
[Peter: add host-pkgconf, drop host package]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since on olinuxino_lime/lime2 we have a Linux version >= 4.20 we need to
pass drm_kms_helper.drm_leak_fbdev_smem=1 to kernel command-line that
really enables DRM_FBDEV_LEAK_PHYS_SMEM. CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM
only adds the code for this, but drm_leak_fbdev_smem is 0 by default, so we
need to override it with 1. Same goes for drm_fbdev_overalloc that
must be at least 200 for having a double buffer that is required by
Mali. This fixes both olimex_a20_olinuxino_lime and lime2 that use
extlinux.conf.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-libcap was added as a dependency of libcap in commit
efae605c88 because back then at
installation time, the setcap utility was called.
However, since commit 57155c6b6a, we use
RAISE_SETFCAP=no, which disables calling setcap at install
time. Therefore, having host-libcap built before libcap is no longer
needed.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
legacy.conf no longer exists, it's now legacy.conf.in that has to be
preprocessed. The preprocessing is only done if sysv-compat is enabled.
This reverts commit 0e71f51119.
Disable zoned on host variant to avoid the following build failure since
bump to version 5.15.1 in commit
20181c3f1b and
7953f4357b:
checking linux/blkzoned.h usability... yes
checking linux/blkzoned.h presence... yes
checking for linux/blkzoned.h... yes
checking for struct blk_zone.capacity... no
checking for BLKGETZONESZ defined in linux/blkzoned.h... no
configure: error: linux/blkzoned.h does not provide blk_zone.capacity
Fixes:
- http://autobuild.buildroot.org/results/03235edd829436d784a9b214050cc97584f372fb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop BR2_PACKAGE_CIVETWEB_WITH_LUA and enable Lua support depending on
BR2_PACKAGE_LUA and BR2_PACKAGE_LUAJIT
It should be noted that civetweb will still use its embedded version of
sqlite
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: add !BR2_STATIC_LIBS, pass LUA_SHARED_LIB_FLAG, explicitly link with
-ldl, rework order]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd doesn't install tmpfiles.d/legacy.conf when sysv compatiblity
isn't enabled. This config sets up /var/lock, which many programs such
as uboot's fw_printenv/setenv still depend on by default.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-buildroot-linux-uclibc/10.3.0/../../../../mipsel-buildroot-linux-uclibc/bin/ld: debug.o: in function `__show_backtrace':
debug.c:(.text+0x10): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/bf78e4be9b9d9ca7d32f922d72ea6cd39a78d3d8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
various services need directories in /var when they are started,
and create them if necessary. Creating those before, allows
those services to start even if /var is read-only.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to be able to use OpenGL with QT5 with a Rockchip Mali
Bifrost GPU, a device integration provider has to be selected. We are
interested in the KMS integration that works well with Mali Bifrost,
make sure it gets build when using rockchip-mali-bifrost as OpenGL
provider.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we have a libgbm virtual package, it makes sense to use it to
replace the open-coded list of gbm providers in qt5base. All of
mesa3d, gcnano-binaries, ti-sgx-um and imx-gpu-viv are libgbm
providers now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Interestingly, only the aarch64 blobs provide libgbm support. This
will help in fixing an issue that exists today, where ARM32 +
imx-gpu-viv + wayland + qt5 fails to build, because qt5 is told that
libgbm is available, i.e the following configuration:
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_VFP=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_GUI=y
BR2_PACKAGE_QT5BASE_EGLFS=y
BR2_PACKAGE_FREESCALE_IMX=y
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y
BR2_PACKAGE_IMX_GPU_VIV=y
BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_WL=y
# BR2_TARGET_ROOTFS_TAR is not set
fails to build during the qt5base configure step with:
ERROR: Feature 'gbm' was enabled, but the pre-condition 'libs.gbm' failed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Depending on the kernel driver is annoying because it means you can't
build ti-sgx-um without enabling a kernel. This prevents easy testing
of ti-sgx-um, and it also means ti-sgx-um is never built by the
autobuilders.
So instead, we select the kernel driver if a kernel is built by
Buildroot. This requires propagating the BR2_arm dependency from
ti-sgx-km to ti-sgx-um.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The OpenGL ES implementation provides a libgbm implementation, so
provide the corresponding virtual package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ti-sgx-um package provides 3 virtual packages, but doesn't have
the TI_SGX_UM_PROVIDES variable. This commit fixes that by adding the
missing variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Continuation lines should be indented one level more than the line the
are the continuation of.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Update indentation in hash file (two spaces)
- This bump will fix the following build failure with libest which was
added with commit f6f0e1e581:
In file included from /home/buildroot/autobuild/instance-0/output-1/host/bin/../nios2-buildroot-linux-gnu/sysroot/usr/include/libsafec/safe_lib.h:43:0,
from est_server_http.c:39:
/home/buildroot/autobuild/instance-0/output-1/host/bin/../nios2-buildroot-linux-gnu/sysroot/usr/include/libsafec/safe_types.h:42:9: error: unknown type name 'size_t'
typedef size_t rsize_t;
^~~~~~
https://github.com/rurban/safeclib/blob/v02092020/ChangeLog
Fixes:
- http://autobuild.buildroot.org/results/5a12f1cb4153834078522b6068ff24ac0300d51d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add "Linux" before kernel in comment to be consistent with other
packages and manual
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add "Linux" before kernel in comment to be consistent with other
packages and manual
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add "Linux" before kernel in comment to be consistent with other
packages and manual
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A module for monitoring memory usage of a python program.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
riscv64gc was made available for BR2_riscv, but RISC-V can be 32-bit
or 64-bit, so we need to restrict it to BR2_RISCV_64. There's no need
to keep the BR2_riscv dependency, as BR2_RISCV_64 can only be true
when BR2_riscv is true.
Also, BR2_PACKAGE_HOST_RUSTC_ARCH needs to be set to riscv64gc to
allow rust-bin to download its pre-compiled standard library
correctly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
BR2_PACKAGE_HOST_RUSTC_ARCH only had a special value for
BR2_ARM_CPU_ARMV7A, but it also needs a special value for
BR2_ARM_CPU_ARMV5, as the pre-compiled Rust standard library for
ARMv5TE is identified with the "armv5te" architecture name, see
https://doc.rust-lang.org/nightly/rustc/platform-support.html.
We noticed this because Rust binaries wouldn't work on an ARMv5
platform (Illegal instruction). This was due to the usage of the
arm-unknown-linux-gnueabi variant of the Rust standard library, which
is for ARMv6. Thanks to this commit, we correctly use the
armv5te-unknown-linux-gnueabi variant, and Rust binaries work properly
on ARMv5TE.
A better approach would be to do the conversion from architecture
options to Rust tuples in a single string symbol that also defines the
supported architectures, similar to how it's done in e.g. openblas.
However, that's a much bigger change. So for now, just do the easy thing
and fix this one issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The host variant was only needed by ca-certificates, which no longer
needs it, so drop this variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The host-python-cryptography module is only used by ca-certificates
for a check of the expiration date of certificates, which is only a
warning not even causing the build to abort, i.e something that
Buildroot users are most likely never going to see.
Since the host-python-cryptography dependency would soon require a
dependency on rust, it's a lot simpler to just patch the
certdata2pem.py script to no longer require cryptography, but only
make use of it if available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The comments were *after* the option they applied to, which was
confusing, so bring back the comments before the option they apply to.
In addition, instead of saying "this option", explicitly name the
option to clear any ambiguity.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is already a package adding Mali blobs for Sunxi Mali Utgard
GPUs. Many Rockchip SoCs feature a Mali Bifrost GPU and need specific
libraries provided under binary form with a non-GPL compliant license
by Rockchip. Package these libraries.
While the repository at https://github.com/rockchip-linux/libmali
supports many GPU variants, this package for now only supports the
Bifrost GPU blob. Support for other GPU blobs can be added later.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[Thomas:
- Rename to rockchip-mali, because it contains other blobs than
Bifrost ones
- Add missing entry in DEVELOPERS file
- Change BR2_arm to BR2_ARM_EABIHF as only EABIhf blobs are provided
for arm32
- Add BR2_TOOLCHAIN_HAS_THREADS inherited from libdrm.
- Expose as a libgbm provider.
- Drop the patch, which was not necessary.
- Rework the entire installation logic, to be much simpler.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-numpy can be built using fortran compiler if available. Pass the
F90 environment variable to setup.py to make sure it picks up the
cross-compiler. Otherwise, use --fcompiler to make sure it doesn't
accidentally pick up the host compiler.
Don't do anything like this for host compilation. We don't care whether
or not it uses fortran.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The PYTHON_NUMPY_FIXUP_NPY_PKG_CONFIG_FILES macro was introduced in
commit
2426002d6f ("package/python-numpy: fixup
npymath.ini for numpy extensions").
However, it turns out that by using $(PYTHON3_PATH), we can simplify
the intermediate variables, to the point where they are no longer
needed. Not having the intermediate variables makes the logic a bit
easier to understand.
Also, the logic is changed to use a single sed expression, which we
pass to $(SED).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The commit [1] added a sed command used to retreive a pattern
to keep only defconfigs whose name start with the pattern.
"<foo>-defconfigs-<pattern>"
The sed command doesn't work as expected if <foo> contains a
single hyphen [2]:
"qemu-6.2.0-defconfigs-qemu"
Update the sed command to ignore completely the part before
"-defconfigs-".
[1] 65d2f04c01
[2] http://lists.busybox.net/pipermail/buildroot/2022-January/632507.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Shortly after MSTPd was added, version 0.1.0 was released. Update to the
latest version.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop first patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix build failure raised since the addition of the libexecinfo package
in commit eea8ba446c
Fixes:
- Not autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This platform has its own kernel defconfig in Buildroot, but we cannot
get quick idea about how much it diverged from the in-kernel defconfig.
Let's use the upstream arch/arm/config/versatile_defconfig as a base,
and maintain the diff as a merge-config fragment. The same .config is
still generated based on the 5.10.7 kernel.
The diff is quite big, but this is a good start-point for cleanups.
Follow-up works can drop diff lines unless we find a good reason for
divergence.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Arnout: rename linux-nommu.config to linux-nommu.fragment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This platform has its own kernel defconfig in Buildroot, but we cannot
get quick idea about how much it diverged from the in-kernel defconfig.
Let's use the upstream arch/arm/config/versatile_defconfig as a base,
and maintain the diff as a merge-config fragment. The same .config is
still generated (based on the 5.10.7 kernel).
The diff is quite big, but this is a good start-point for cleanups.
Follow-up works can drop diff lines unless we find a good reason for
divergence.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Arnout: rename linux.config to linux.fragment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This Linux defconfig fragment is needed to disable Lima driver in favour of
Mali(if enabled). This because Lima is enabled by default in Linux's
sunxi_defconfig and if we enable Mali driver in Buildroot it will fail to
load. So let's set CONFIG_DRM_LIMA=n. Of course this fragment is only used
by Buildroot defconfigs that enable Mali driver.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
After the update of u-boot in commit 9a04bbec1c (configs/imx6slevk: bump
U-Boot).
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1946650628
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In GCC6 the compiler was made smarter to omit the flag
-fdebug-prefix-map from the DWARF DW_AT_producer section[1]. That flag
contains the absolute path '$(BASE_DIR)' which breaks reproducibility.
Prior to GCC6 however, the only way to omit the flag is to use
-gno-record-gcc-switches which omits all flags.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=266cc0c181549c2fb6b50f8f26213cdc89101026
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[Arnout: invert condition to ifeq (,) instead of ifneq (,y)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In GCC8 the flag -ffile-prefix-map handles cleaning up both the __FILE__
macros and the debug info paths. In GCC7 or below we are manually
handling the __FILE__ macros, but not debug info paths. Use
-fdebug-prefix-map to clean them up. This option exists since GCC 4.3.0,
which is our minimal supported GCC version.
See for more detail: https://reproducible-builds.org/docs/build-path/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libest is a C implementation of RFC 7030 (Enrollment over
Secure Transport).
It can be used to provision public key certificates from
a certificate authority (CA) or registration authority (RA)
to end-user devices and network infrastructure devices.
https://github.com/cisco/libest
Notes on patches included in this package:
- libest bundles a stubbed version of libsafec, and has no provision
to build against a system-installed full (non-stubbed) libsafec.
We add a patch to make that possible.
- Added a configuration option --{enable,disable}-examples to toggle
examples build by a separate patch.
- There's a configuration option `--enable-jni` which allows to build
a JNI library for binding libest to Java programs. And that library
would be using an outdated version of OpenSSL 1.0.
We fix that by adding support for OpenSSL 1.1 API for that library.
- Fixed a bug when specifying either `--enable-FEATURE` or `--disable-FEATURE`
has always been enabling the feature.
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
[Thomas:
- Added comments about the upstream status in existing patches
- Added a patch fixing an autoreconf issue
- Added a patch adding a missing "extern" on a variable to fix build
with gcc 10
- Removed the glibc dependency by using the new libexecinfo package
- Drastically simplified the complex libcoap disabling and client-only
mode vs. OpenJDK issue. libcoap support is now forcefully disabled,
and client-mode only option is made invisible when OpenJDK is
enabled.
- Fixed the license information;
- Added missing host-pkgconf
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GnuTls implements old, unsafe or unused protocols and cyphers
Secure embedded systems shall disable them in order to be certified.
This patch allows to select/deselect SSLv2 protocol and gost cipher.
Signed-off-by: Erwan GAUTRON <erwan.gautron@bertin.fr>
[Peter: default options to 'n', move next to _GNUTLS_TOOLS, explicit
--enable]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Agent is always enabled. Even though a server without agent is a valid
use case, the agent doesn't take much space compared to the server so
making it optional is not worth it.
Optional dependencies (openssl, libcurl, ...) are set globally, even
though they are supposedly only used for the server. However, this is
not so obvious from configure.ac so it's easy to accidentally miss one.
Setting them globally doesn't hurt.
The proxy, agent2 and webservice features are left disabled. agent2
requires go.
zabbix also has support for sqlite3 as database backend, but only for
the proxy, not for the server.
Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
[Arnout:
- BR2_TOOLCHAIN_USES_GLIBC implies the other glibc options.
- Fix wrapping in Config.in help text.
- Add upstream URL.
- Protect comments with "depends on" instead of "if".
- Select postgresl/mysql instead of depends (and propagate
dependencies).
- Remove redundant condition around
BR2_PACKAGE_ZABBIX_SERVER_COPY_DUMPS.
- Select PHP extensions instead of depends.
- Make optional dependencies automatic instead of Config.in.
- Improve some of the help texts.
- Bump to 5.4.9 and update hashes.
- Add COPYING as license file.
- Switch to actual upstream at zabbix.com.
- Explicitly disable all unused features.
- Disable zabbix user login with '*'.
- Don't add user to zabbix group twice.
- Do patch of zabbix_*.conf in post-patch hook and do it for all conf
files in one shot.
- Remove workarounds for pending patches (which were merged).
- Put web ui in /var/www/zabbix and SQL files in /var/lib/zabbix.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current behavior for busybox' udhcpc is to terminate if no lease is
obtained at start up. Therefore no address is acquired if the link is
established afterwards.
By setting the -b flag udhcpc will background allowing the link to be
established at any time.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Peter: drop incompatible -n, also fixup busybox-minimal.config]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These packages needed to depend on host-python3 because their Scons
machinery was written in python3, but host-scons itself was depending
on host-python. Now that host-scons depends on host-python3, the
packages that use host-scons no longer have to carry a host-python3
dependency.
The other package using scons, mongodb, does not have a direct
dependency on host-python3, but on a number of host Python 3.x modules
which are needed during the build, so no changes is necessary there.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back in commit
f72be49830 ("package/scons: remove
python from SCONS"), we changed the SCONS variable to not explicitly
invoke the Python interpreter, because some scons-based packages used
python2, some python3.
Now that the 3 remaining packages using scons (gpsd, mongodb and
benejson) all use python3, we can bring back the python3 interpreter
call into the SCONS variable, and slightly simplify those packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All packages using scons are now using Python 3 to run it, so
explicitly set scons as using host-python3. This avoids a
spurious host Python 2 dependency if BR2_PACKAGE_PYTHON3 is not
set (for example, if no Python is packaged for the target).
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use src/libfakekey.c as the license file because there is no COPYING in
the git tarball
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Back in commit e90a4bf4af ("alsa-lib:
don't use versioned symbols") from 2009, symbol versioning was
disabled in alsa-lib, because it was causing problems with C
libraries (such as uClibc) that doesn't support symbol versioning. The
thread at
http://mailman.alsa-project.org/pipermail/alsa-devel/2009-February/014999.html
has some background discussion about this.
Essentially, the issue was that alsa-lib in the new version of a given
symbol calls into an old version of the same symbol. If your C library
has symbol versioning, everything works fine. But if your C library
doesn't support symbol versioning, the call from the new symbol into
the old symbol will in fact end up in the new symbol, causing an
infinite recursion.
That problem was solved back then by unconditionally disabling symbol
versioning in alsa-lib.
However, some libraries such as CEF depend on versioned symbols from
alsa-lib, and the build fails during linking with versioning disabled.
This patch conditionally disables versioned symbols when unsupported
by the toolchain, leaving them enabled otherwise. We assume only glibc
has support for symbol versioning. uClibc has no support, and musl has
some limited support, so we take the safe route of only enabling
symbol versioning for glibc.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-41105: FreeSWITCH susceptible to Denial of Service via invalid
SRTP packets
When handling SRTP calls, FreeSWITCH is susceptible to a DoS where calls
can be terminated by remote attackers. This attack can be done
continuously, thus denying encrypted calls during the attack.
https://github.com/signalwire/freeswitch/security/advisories/GHSA-jh42-prph-gp36
- CVE-2021-41157: FreeSWITCH does not authenticate SIP SUBSCRIBE requests by default
By default, SIP requests of the type SUBSCRIBE are not authenticated in
the affected versions of FreeSWITCH.
https://github.com/signalwire/freeswitch/security/advisories/GHSA-g7xg-7c54-rmpj
- CVE-2021-37624: FreeSWITCH does not authenticate SIP MESSAGE requests,
leading to spam and message spoofing
By default, SIP requests of the type MESSAGE (RFC 3428) are not
authenticated in the affected versions of FreeSWITCH. MESSAGE requests
are relayed to SIP user agents registered with the FreeSWITCH server
without requiring any authentication. Although this behaviour can be
changed by setting the auth-messages parameter to true, it is not the
default setting.
https://github.com/signalwire/freeswitch/security/advisories/GHSA-mjcm-q9h8-9xv3
- CVE-2021-41145: FreeSWITCH susceptible to Denial of Service via SIP flooding
When flooding FreeSWITCH with SIP messages, it was observed that after a
number of seconds the process was killed by the operating system due to
memory exhaustion
https://github.com/signalwire/freeswitch/security/advisories/GHSA-jvpq-23v4-gp3m
- CVE-2021-41158: FreeSWITCH vulnerable to SIP digest leak for configured gateways
An attacker can perform a SIP digest leak attack against FreeSWITCH and
receive the challenge response of a gateway configured on the FreeSWITCH
server. This is done by challenging FreeSWITCH's SIP requests with the
realm set to that of the gateway, thus forcing FreeSWITCH to respond with
the challenge response which is based on the password of that targeted
gateway.
https://github.com/signalwire/freeswitch/security/advisories/GHSA-3v3f-99mv-qvj4
Release notes:
https://github.com/signalwire/freeswitch/releases/tag/v1.10.7
Removed patch, upstream applied a different fix:
e9fde845de
Added optional dependency to libks, needed due to upstream commit
ed98516666
Added upstream patches to fix build errors.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Peter: mention security fixes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So far, cryptopp only had a host variant, but some use-cases require
this library on the target, so this adjusts the cryptopp package
accordingly.
One patch (submitted upstream) is needed to have the proper symlink
corresponding to the SONAME of the shared library.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
prometheus remote write backend depends on protobuf and snappy and is
enabled by default since the addition of the package in commit
1d2bb46907
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to build the numpy distutils extension packages like
python-scipy, python-numba, it requires an explicit pkg-config
path fixup for npymath.ini.
This pkg-config path fixup would update the prefix path of
npymath.ini with actual target staging area where numpy core
was built, so that numpy distutils extension packages would
explicitly link this config path for their package environment.
Without this extension packages cannot find -lnpymath since
it uses host libraries (like libnpymath.a).
So, attach the post install staging hook with pkg-config
path fixup for npymath.ini.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The way that python-pybind can be used is fairly complicated, so a
runtime test for it is convenient. In addition, this test validates that
the headers actually work at runtime.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Arnout:
- Retain python3 only.
- python-pybind is a target package, not host.
- Select python-pybind instead of depend.
- Simplify python-pybind-example package.
- Check in python-pybind-example build if pybind11.get_include()
produces output.
- Don't use python3 -m pybind11 --includes: it includes the main python
includes, which are for the host, not for the target.
- Use TestPythonPackageBase instead of open-coding something imported
with host python.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
pybind11 is not really a Python module; it is actually a set of headers
that is used to wrap Python objects in C++.
Since pybind version 2.6.1, it uses CMake internally. This causes a
number of build issues for Buildroot because either no cmake is present
or it is too old.
pybind in fact has three parts: the C++ headers, a python module
pybind11, and the tests. The python package's only purpose is to serve
as a configure script for users of pybind. CMake is mainly used to build
and run the tests, which use the (mock-installed) pybind11 module to
find the (mock-installed) C++ headers. CMake is also used to install the
headers.
The setup.py script calls into CMake to install the headers and CMake
support files to a temporary directory, then copies that together with
the pybind11 module into the Python directory. The pybind11 module then
returns the include and cmake paths relative to its install location
(using __file__ to determine the install location).
This is not at all compatible with how Buildroot expects things to be
organised.
- The include and CMake files are installed somewhere within the Python
directories, where nobody will find them.
- The Python module is installed for the target, but at build time
Python modules are read from the host directory only. Therefore, a
user of pybind can't actually load the module.
To solve this, several options are possible:
- Treat pybind as a host package. This causes users of pybind to build
with an include path pointing into the host directory. This happens to
work because pybind is a header-only library and because it is
installed in a specific location which is not contaminated by other
headers. However, it is philosophically wrong - a build for the target
should never have an include path pointing to the host directory.
- Install pybind in the usual way into staging, and add a stub module to
the host directory that returns paths to the staging directory. This
leaves a useless pybind11 module in the staging directory, and puts
the headers and cmake files in an unusual location. In addition it
is not so simple - we need to jump through hoops to make sure that
cmake is called correctly when it goes through python-package.
- Install the headers and cmake files using CMake, and add a (stub)
python module in the host directory that points users to the staging
directory. This puts the headers in the usual place
(STAGING_DIR/usr/include) and still makes it possible to find them
from a python package at build time.
We choose the latter solution.
First of all, convert to cmake-package. This installs just the headers
and the cmake support files. We need to pass PYBIND11_NOPYTHON=ON
because there is a cmake module that tries to find the python binary. It
sometimes finds the system python, sometimes the host python. In either
case, it checks whether this python's bitness and endianness correspond
to that of the compiler - which generally it doesn't in
cross-compilation. PYBIND_NOPYTHON bypasses this check.
Install in staging and not in target. Before, it was installed to target
but the python module would point to the target directory so it worked
anyway; now, however, we can properly use the staging directory.
Since it is no longer a python-package, the python module is not
installed automatically. Install them manually in a post-staging-install
hook. Since the python module is supposed to be used at build time,
install it in the host directory rather than in staging.
The python module normally looks in its current directory to find the
include and cmake paths, but for cross-compilation this is wrong. Add a
non-upstreamable patch that checks for STAGING_DIR in the environment.
If it is set (which is the case in Buildroot), use that instead of the
current directory.
Add an explicit dependency on python3. The headers include Python.h, so
any user of pybind needs to implicitly depend on python3. While we're at
it, change it to support python3 only - even though pybind currently
still supports python2, adding support for it in Buildroot is a little
bit complicated and python2 will be removed soon anyway.
Cc: Esben Haabendal <esben@geanix.com>
Cc: Andreas Naumann <dev@andin.de>
Co-Developed-by: Jagan Teki <jagan@amarulasolutions.com>
Co-Developed-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable execinfo to avoid the following build failure raised since the
addition of libexecinfo package in commit
eea8ba446c:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/10.2.0/../../../../arc-buildroot-linux-uclibc/bin/ld: main.o: in function `do_panic(int)':
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/rtorrent-0.9.8/src/main.cc:606: undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/10fc9016013931c58238240216c5950b23b56b30
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, Avahi installs service definitions for SSH and SFTP, but
those might not be present on all systems. This commit adds an option
to control the installation of those Avahi services. Even though that
potentially breaks backward compatibility with older configuration, we
have chosen to make the option default to disable, which means that
now the SSH and SFTP avahi services are no longer installed by
default.
As there is no way to tell the Avahi package not to install the
service files in the first place, we have to manually remove them from
the target directory.
Signed-off-by: Florian Larysch <fl@n621.de>
[Thomas: make the option default to disabled, fix small formatting issues.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1bf512e9ff wrongly added that
BR2_USE_WCHAR is due to flac dependency but flac is optional so remove
this comment and add boost instead
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A client interface for the Music Player Daemon.
[Peter: license is LGPL-3.0+, add DEVELOPERS entry]
Signed-off-by: Uladzimir Bely <wiselord1983@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable CONFIG_IO_URING through LIBURING_LINUX_CONFIG_FIXUPS in case the
user is also building a kernel
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Bootlin toolchains for the OpenRISC architecture have been rebuilt
with the fix for binutils bug 28735, so let's update their definition
in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the io_uring library, liburing. liburing provides helpers to
setup and teardown io_uring instances, and also a simplified interface
for applications that don't need (or want) to deal with the full kernel
side implementation.
https://git.kernel.dk/cgit/liburing
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After fixing binutils bug 21464, bug 28735 showed up. It got fixed very
soon after my request:
https://sourceware.org/pipermail/binutils/2022-January/119078.html
So let's add patch and backported patches to all binutils versions to make
Buildroot free from bug 28735. Unfortunately Bootlin toolchains have just
been rebuilt and will fail for this bug. This happened because libgeos
has been bumped few time ago and was masked by bug 21464 dependency that
prevented to build.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable execinfo to avoid the following musl build failure raised since
the addition of libexecinfo package in commit
eea8ba446c:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/openipmi-2.0.28/utils/.libs/libOpenIPMIutils.so: undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/dcc33c5cca97d538231647a94212450f043974b3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original patch for commit cff428fe31 ("download/git: support Git
LFS") included a call to "git lfs install" but this was a problem as it
could modify ~/.gitconfig outside the dl/ tree. When this was
updated it was thought that the modification to gitconfig was
unnecessary because the LFS fetch and checkout steps are performed
manually.
Unfortunately, this is not correct and the LFS checkout fails with:
Cannot checkout LFS objects, Git LFS is not installed.
Add the call to "git lfs install", with the --local option so that only
the repository's .git/config is modified and not the user's global
~/.gitconfig.
This is also required for submodules as the parent repository's config
is not inherited.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Create a test to check Mender client at runtime.
The aim of this test is:
- to check the correct execution of simple Mender commands,
in a minimal environment;
- to validate there is no missing dependencies for runtime.
This test is not a board integration test for Mender,
including well-configured bootloader, partitioning, ...
Check:
- the daemon is started;
- the current 'artifact name' (name of the image or update) of the active
partition is read, without error.
For that, we need to fake (see the 'overlay' directory):
- some bootloader environment variables;
- the name of an update.
Signed-off-by: Mikael Bourhis-Cloarec <mikael.bourhis@smile.fr>
[Romain: remove single hyphen command (Mender 3.0.0)]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In both bayer2rgb-neon and gst1-plugins-bayer2rgb-neon, the Config.in
comment was not displayed on aarch64, even though both packages are
available on this architecture.
To fix this, this commit introduces
BR2_PACKAGE_BAYER2RGB_NEON_ARCH_SUPPORTS, and makes use of it in both
packages.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Thomas: add BR2_PACKAGE_BAYER2RGB_NEON_ARCH_SUPPORTS, use it to fix
both packages]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This causes warning on ./utils/get-developers:
WARNING: 'package/qt5/qt5webkit-examples/' doesn't match any file
because 'package/qt5/qt5webkit-examples/' has been removed, so let's remove
its entry in this file.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable -Werror by setting CWFLAGS to ""
This will avoid the following build failure raised since bump to version
4.2 in commit b03fc79745:
mdadm.c: In function 'main':
mdadm.c:156:28: error: this statement may fall through [-Werror=implicit-fallthrough=]
154 | if (mode == ASSEMBLE || mode == BUILD ||
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/c0f216b7aadb794110409d03dcef7fa58e833cd4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fixed: [CVE-2021-46141]
Fix a bug affecting both uriNormalizeSyntax* and uriMakeOwner*
functions where the text range in .hostText would not be duped using
malloc but remain unchanged (and hence "not owned") for URIs with
an IPv4 or IPv6 address hostname; depending on how an application
uses uriparser, this could lead the application into a use-after-free
situation.
As the second half, fix uriFreeUriMembers* functions that would not
free .hostText memory for URIs with an IPv4 or IPv6 address host;
also, calling uriFreeUriMembers* multiple times on a URI of this
very nature would result in trying to free pointers to stack
(rather than heap) memory.
- Fixed: [CVE-2021-46142]
Fix functions uriNormalizeSyntax* for out-of-memory situations
(i.e. malloc returning NULL) for URIs containing empty segments
(any of user info, host text, query, or fragment) where previously
pointers to stack (rather than heap) memory were freed.
https://github.com/uriparser/uriparser/blob/uriparser-0.9.6/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
download post process scripts will often need to unpack the source
code tarball, do some operation, and then repack it. In order to help
with this, post-process-helpers provide an unpack() function and a
repack() function.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This will allow packages to register that a download post-processing
is needed. Note that this variable is intentionally not documented: it
is an internal variable meant to be set by package infrastructures,
not directly by packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In order to support package managers such as Cargo (Rust) or Go, we
want to run some custom logic after the main download, but before
packing the tarball and checking the hash.
To implement this, this commit introduces a concept of download
post-processing: if -p <something> is passed to the dl-wrapper, then
support/download/<something>-post-process will be called.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- double-quote variable expansion when calling post-process script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, relocate-sdk.sh must be run _after_ relocating the SDK. There
are cases where it is useful to already prepare the SDK _before_
relocating. For example, it allows to prepare a tarball that the user
has to extract to a specific, pre-defined location and nothing more than
that, which is simpler for the user than requiring the script to be run.
In addition, it hides the build directory that was used by the SDK
builder (somewhat).
Add an optional argument to relocate-sdk.sh that gives the target
directory.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-iptables depends on ctypes.util.find_library() which does not
work due to the absence of gcc and friends on target. The location of
the xtables library and the iptables modules can be configured through
environment variables. Within the scope of buildroot we can determine
what these should be at build time and replace the calls to os.getenv()
with the correct value.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12271
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package provides a Mali kernel driver for Sunxi Mali Utgard GPUs. The
trailing -mainline is historical and was used at a time when there was
two packages providing this driver. The "non-upstream" package has
been removed some time ago so before adding new packages bringing
support for other ARM Mali GPU versions or implementations, rename
sunxi-mali-mainline-driver into sunxi-mali-utgard-driver.
Add a legacy entry.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: rebase on master. Add legacy entry instead of substituting the
blob's one]
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package provides Mali libraries for Sunxi Mali Utgard GPUs. The
trailing -mainline is historical and was used at a time when there was
two packages providing these libraries. The "non-upstream" package has
been removed some time ago so before adding new packages bringing
support for other ARM Mali GPU versions or implementations, rename
sunxi-mali-mainline into sunxi-mali-utgard.
Add a legacy entry.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: rebase on master. Rename SUNXI_MALI_MAINLINE_REV to
SUNXI_MALI_UTGARD_REV in sunxi-mali-mailine-driver.mk and
BR2_PACKAGE_SUNXI_MALI_MAINLINE to BR2_PACKAGE_SUNXI_UTGARD in
sunxi-mali-mainline-driver/Config.in to respect bisectability]
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
[Build tested only]
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Arnout: also update existing select in Config.in.legacy]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package provides the firmware for LS1028ARDB DP (display port).
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
[Arnout:
- move out of nxp directory;
- add extraction helper;
- set REDISTRIBUTE to NO.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The qoriq-rcw repository contains the RCW source for a lot of
development boards already. Add a new option
BR2_PACKAGE_HOST_QORIQ_RCW_INTREE to use one of these rather than a
custom one.
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
[Arnout:
- rename the option to _RCW_INTREE;
- update commit message, documentation, and internal variables
accordingly;
- reorganise condition tree so it becomes a little simpler;
- add patsubst so the source can be specified as either %.rcw or %.bin;
- always install it as PBL.bin, to be consistent with the custom
option.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We introduce the concept of a pre-build script that works similar to
the already existing post-build and post-image scripts.
The pre-build script(s) are executed before the build commences. This
allows a user to run some preperatory tasks prior to the build.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Git Large File Storage replaces large files with text pointers in the
Git repository while storing the contents on a remote server. If a
repository is using this extension, then git-lfs must be used to
checkout the large files before the source archive is generated.
Signed-off-by: John Keeping <john@metanate.com>
[vfazio:
- add git-lfs to DL_TOOLS_DEPENDENCIES
- fixup for 5a0d681394
("infra/pkg-download: make the DOWNLOAD macro fully parameterised")
]
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[Arnout:
- don't "git lfs install";
- recurse into submodules.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package seems to have issues building with the latest
qt5webkit release, as it has not received updates upstream
since 2017 remove it as it is unlikely to be fixed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
support/testing/tests/download/sshd.py:50:28: E261 at least two spaces before inline comment
1 E261 at least two spaces before inline comment
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A new docker image was created that includes openssh-server. Use this
image in CI.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add download test infrastructure which starts an OpenSSH server using
the sshd binary installed on the Buildroot host. This server can then be
used to test the expected usage of the SCP and SFTP download methods.
The test creates new SSH keys for the server and client, so that the
server can be run as a non-root user.
A new test module has been added called `tests.download.sshd` which
contains helper methods to create the SSH keys and a class called
`OpenSSHDaemon` which handles the sshd server component.
The tests download example packages in the br2-external project `ssh`.
They check the following conditions for both SCP and SFTP download
methods:
- Correct hash.
- Incorrect hash.
- No hash file.
The SSH download test infrastructure is based on test_git.py.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
[Arnout:
- remove spurious end-of-line backslash;
- remove unnecessary executable bit;
- skip test instead of failing if sshd, ssh-keygen, scp or sftp are not
found;
- decode the output of subprocess;
- use subprocess.check_output instead of subprocess.get_output;
- use subprocess.check_call instead of manually checking return code;
- don't set always-overridden SSHD_PORT_NUMBER in .mk file;
- explicitly set sshd options on commandline instead of relying on host
/etc/sshd/sshd_config;
- let sshd listen only on localhost;
- user internal sftp server;
- disable BACKUP_SITE, no network is supposed to be accessed;
- remove the -bad and -nohash versions;
- rename {sftp,scp}-good to plain {sftp,scp};
- move the sftp and scp packages into a single "ssh" external.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add Secure File Transfer Program (SFTP) support using a simple wrapper.
SFTP is a common protocol used to transfer files securely between
enterprises, but it is not currently supported in Buildroot because all
of the packages are usually available via HTTP, git or some other
download method.
SFTP is similar to FTP but it preforms all operations over an encrypted
SSH transport using a specific protocol. This is unlike ftps, which is
traditional FTP over an SSL/TLS connection.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Michael Drake <michael.drake@codethink.co.uk>
[Arnout:
- update documentation with sftp everywhere scp is mentioned;
- rename "verbose" variable to "quiet";
- print the sftp command, similar to wget and scp helpers.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Install the openssh-server package into the test container. This
package, as well as its dependency openssh-client, is required to test
SCP and SFTP download methods on the localhost, as if these tools were
already installed on the user's machine.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It wasn't immediately obvious to me what the two Buildroot base test
classes were for, so add docstrings to explain the differences between
BRConfigTest and BRTest.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package was initially requested by José Pekkarinen, so he is
assigned as the maintainer for it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we look for the actual date be easrching form the end of the
PATH, and keeping the last-found date that occurs after the wrapper.
However, in some cases, the wrapper will be the last item in the PATH.
This is the cae when users already have the HOST_DIR/bin at the end of
their PATH, à-la: PATH="${PATH}:/path/to/buildroot/output/host/bin"
In this case, we would not find any matching date.
The issue is that Buildroot adds HOST_DIR/bin at the beginning of the
PATH, so the real date will be to be found after the HOST_DIR that is
early in the PATH, but before the HOST_DIR that is at the end.
We fix the issue by searching the PATH as it is expecte to be searched,
shoud Buildroot had not added its date wrapper: we use the first date
executable that is found in the PATH, starting from the beginning, that
is after our wrapper, abd that is not the wrapper itself.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[yann.morin.1998@free.fr:
- iterate in order from first-to-last
- stop on the first occurence
- handle the case where no date was found
- extend and expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Re-add patch 0001 to fix uClibc build, this patch was removed 2019:
https://git.buildroot.net/buildroot/commit/?id=573d15b0790cfd2838cf0544ded79b415e20f5a7
Add two more patches from Alpine Linux to fix musl build.
Add optional dependency to libexecinfo to provide execinfo.h.
Add a patch that ensures an internal gettext symbol doesn't get used
except on glibc and uclibc toolchains. Indeed, both glibc and uclibc
provide the _nl_msg_cat_cntr variable, but not the musl
implementation.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
commit b3c66481e1 replaced RISC-V LP64
bootlin toolchains by RISC-V LP64D. However, Config.in.legacy was added
for BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_GLIBC_STABLE, which never
existed (the stable version was only added after the switch to LP64D).
Conversely, BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_MUSL_BLEEDING_EDGE,
which was removed, was not mentioned in Config.in.legacy.
Correct the symbol name and its comment in Config.in.legacy.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Update License hash due to updated year
Fixes:
- Make sure C++17 filesystem conversions are only used if the compiler supports it.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to latest release in new active upstream:
https://github.com/qtwebkit/qtwebkit
Migrate python2 build to python3.
Drop patches that are upstream/no longer needed.
Adapt/add patches to fix build issues.
Rework build system to use cmake instead of qmake(which does not
currently support cross compilation).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
pyqt5 uses qmake internally, but is python package rather than a qmake
package. Therefore, we need to manually apply the same fixup as for
qmake packages.
Without this, top-level parallel build may fail because dependencies are
looked for in the qt5 per-package staging directory instead of the
python-pyqt5 one.
Signed-off-by: Florent AUMAITRE <florent.aumaitre@medianesysteme.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since the addition of the package
in commit 663f39c88c:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/10.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: ../libfreeipmi/.libs/libfreeipmi.a(libfreeipmi_la-ipmi-kcs-driver.o): in function `_ipmi_kcs_test_if_state':
/home/buildroot/autobuild/instance-1/output-1/build/freeipmi-1.6.8/libfreeipmi/driver/ipmi-kcs-driver.c:537: undefined reference to `inb'
Fixes:
- http://autobuild.buildroot.org/results/13f58266f7747c183033c811a4e8ca6fa30b6f4d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with gcc 4.8 raised since bump to
version 2.86 in commit 5b29096f8f:
option.c: In function 'one_opt':
option.c:2445:11: error: 'for' loop initial declarations are only allowed in C99 mode
for (char *p = arg; *p; p++) {
^
option.c:2445:11: note: use option -std=c99 or -std=gnu99 to compile your code
option.c:2453:11: error: 'for' loop initial declarations are only allowed in C99 mode
for (u8 i = 0; i < sizeof(daemon->umbrella_device); i++, arg+=2) {
^
Fixes:
- http://autobuild.buildroot.org/results/39b34a4e69fc10f4bd9d4ddb0ed8c0aae5741c84
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Set PYTHON_EXECUTABLE to avoid the following build failure when
BR2_PACKAGE_PYTHON is enabled but libiio finds python3 without
setuptools on host:
-- Found Python: /usr/bin/python3.5 (found version "3.5.3") found components: Interpreter
-- new
-- Python_EXECUTABLE /usr/bin/python3.5
[...]
Traceback (most recent call last):
File "/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.23/bindings/python/setup.py", line 15, in <module>
from setuptools import setup
ImportError: No module named 'setuptools'
Fixes:
- http://autobuild.buildroot.org/results/d80e56e4ad84c8e7f244cf6d1cb96c116e8eb734
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since the addition of the package
in commit c618da772d:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: src/zck_gen_zdict.p/zck_gen_zdict.c.o: in function `main':
zck_gen_zdict.c:(.text.startup+0x254): undefined reference to `fork'
Fixes:
- http://autobuild.buildroot.org/results/582b994372435b8c35a56345c15bd0ffc722af79
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The version of the kernel and its headers must be explicitly set because
if you keep the default setting, the kernel is continuously updated in
buildroot with the risk that its image + dtb grow so much that it again
exceeds the 2 MByte of the flash module.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a XIP kernel, so it shouldn't be compressed.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to version 2021.10 and kernel to 5.15.11
Among other things fixes U-Boot build failure,
see https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006081:
---------------------->8-------------------
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
---------------------->8-------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Depedency on libuuid was removed in:
210b2d639c
Drop 0001-configure-make-build-gnu99.patch as it is in 5.2
Signed-off-by: Erik Larsson <who+buildroot@cnackers.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
commit b3c66481e1 replaced RISC-V LP64
bootlin toolchains by RISC-V LP64D. The config symbols
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_GLIBC_BLEEDING_EDGE and
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_GLIBC_STABLE were marked as legacy.
Those changes were not reflected in the autobuild toolchain configs in
support/config-fragments/autobuild/bootlin-riscv64-{glibc,musl}.config
When testing a package with the command:
./utils/test-pkg --all --package somepackage
bootlin-riscv64-{glibc,musl} toolchain are always skipped. The build
logfile contains:
[...]
Value requested for BR2_TOOLCHAIN_EXTERNAL_BOOTLIN not in final .config
Requested value: BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
Actual value:
Value requested for BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_GLIBC_BLEEDING_EDGE not in final .config
Requested value: BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_GLIBC_BLEEDING_EDGE=y
Actual value: # BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_GLIBC_BLEEDING_EDGE is not set
This commit update the autobuild config fragments for RISC-V 64bit
toolchains so they can be used by test-pkg.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Make 4.3 is buggy and leads to a "Segmentation fault (core dumped)" when
calling 'make printvars' or 'make show-vars', so let's refuse to execute
those recipes if Make 4.3 by adding 'check-make-version' recipe as
depedendency of 'printvars' and 'show-vars' as suggested by Yann E. Morin.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable execinfo to avoid the following build failure if libexecinfo is
built before tvheadend since the addition of the package in commit
eea8ba446c:
/home/peko/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: /home/peko/autobuild/instance-0/output-1/build/tvheadend-b8710206eb073c72b142bce95846b77a0ffa34a6/build.linux/src/tvhlog.o: in function `tvhlog_backtrace_printf':
/home/peko/autobuild/instance-0/output-1/build/tvheadend-b8710206eb073c72b142bce95846b77a0ffa34a6/src/tvhlog.c:522: undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/ee9ad2c999b622097fe0f1522e7e32184722e548
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump of python3 to version
3.10.1 in commit 25b1fc2898:
configure: error: cannot import Python module "distutils".
Please check your Python installation. The error was:
<string>:1: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives
Fixes:
- http://autobuild.buildroot.org/results//f3e400cbb5b00fbd7f0cb421c993e46b64ec5ac5
_AUTORECONF was already set to YES even though it was no longer needed
since the patches were removed with the bump to 3.0.1 in 2cacda2591. So
just update the comment.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Honour the buildroot verbose flag ('V=1') for the waf compile step by
adding '-v' to the build command.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable new configure options added by this release to avoid
adding new dependencies or features.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
-E flag instructs patch to remove empty files. However, in some cases
empty files are essential. If they are missing, build could be broken
or other bad things can happen.
Note that empty files are still removed when their headers are properly
formattedo: timestamp set to 1970-01-01T00:00:00Z, destination set to
/dev/null.
Signed-off-by: Andrey Nechypurenko <andreynech@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with sigrok-cli raised since bump of
python3 to version 3.10.1 in commit
25b1fc2898:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-none-linux-gnu/10.3.1/../../../../aarch64-none-linux-gnu/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/lib/libsigrokdecode.so: undefined reference to `PyTuple_SetItem'
Fixes:
- http://autobuild.buildroot.org/results/e2f33366803b18aff29086007610fa0a264f90d6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Make 4.3 is buggy and when parallel building host-libnss/libnss we end up
with a failure thrown by make itself. So let's work-around this by don't
parallel build the package if Make version is 4.3.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Intended as an aid when working with in-tree C files, like makdevs.c.
Unlike for the kernel, which still has an 80-char limit line (but they
decided not to enforce it [0]), we set the limit to 132-char for us,
like we do for the python code (see ./.flake8).
[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bdc48fa11e46f867ea4d75fa59ee87a7f48be144
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[yann.morin.1998@free.fr: use and explain the 132-char limit)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When using BR2_ROOTFS_DEVICE_TABLE to change ownership of /etc, like so:
/etc r -1 root wheel - - - - -
makedevs fails due to trying to chown() a dangling symlink:
makedevs: chown failed for /src/myLinux/output/build/buildroot-fs/ext2/target/etc/mtab: No such file or directory
makedevs: line 25: recursive failed for /src/myLinux/output/build/buildroot-fs/ext2/target/etc: No such file or directory
make[2]: *** [fs/ext2/ext2.mk:63: /src/myLinux/output/images/rootfs.ext2] Error 1
make[1]: *** [Makefile:84: _all] Error 2
make[1]: Leaving directory '/src/myLinux/buildroot'
This patch changes chown() to lchown() in two cases in makedevs.c when
the argument can be a symlink, dangling or not.
In case the recursive operation includes a chmod() as well, explicitly
exclude symlinks that are dangling, because chmod() always operates on
the link target.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Following the bump to 8.1910.0, items requiring libcurl were
disabled by default. This patch selectively enables options
which depend on libcurl when that package is enabled in the
build.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Fabrice: Disable mmkubernetes which also depends on lognorm and while
at it also disable mmnormalize which is available since version 6.1.2
(from 2010) and
b9d3cdceab]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
FreeIPMI provides in-band and out-of-band IPMI software based on the
IPMI v1.5/2.0 specification.
The IPMI specification defines a set of interfaces for platform
management and is implemented by a number vendors for system management.
The features of IPMI that most users will be interested in are sensor
monitoring, system event monitoring, power control, and serial-over-LAN
(SOL).
https://www.gnu.org/software/freeipmi/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit a5d2c379eb (package/openjdk: add ARC HS3x/4x support via "Zero
Assembly Project") forgot to limit the scope of the ARC support.
As of now for ARC we only have fully-interpreted mode AKA "Project Zero"
and so all the JIT'ed modes must be explicitly disabled for ARC.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump to version 3.10.1 in
commit 25b1fc2898:
/home/buildroot/autobuild/instance-3/output-1/build/python3-3.10.1/Modules/_hashopenssl.c:244:22: error: implicit declaration of function 'EVP_blake2s256'; did you mean 'LN_blake2s256'? [-Werror=implicit-function-declaration]
244 | digest = EVP_blake2s256();
| ^~~~~~~~~~~~~~
| LN_blake2s256
Fixes:
- http://autobuild.buildroot.org/results/9112571b75aebb0ba5032ef1b16226d9848f5184
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
License hash change due to full text removal:
307fd35a84
Fixes(python 3.10 compatibility):
File "/usr/lib/python3.10/site-packages/aiohttp_sse/__init__.py", line 107, in wait
File "/usr/lib/python3.10/site-packages/aiohttp_sse/__init__.py", line 144, in _ping
TypeError: sleep() got an unexpected keyword argument 'loop'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
File "/usr/lib/python3.10/site-packages/aiohttp/__init__.py", line 6, in <module>
File "/usr/lib/python3.10/site-packages/aiohttp/client.py", line 88, in <module>
File "/usr/lib/python3.10/site-packages/aiohttp/tracing.py", line 5, in <module>
ModuleNotFoundError: No module named 'aiosignal'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Change the url to the github ofalk repository (SF's repo is MIA; now
everyone and their distros switched over to the Github-hosted fork).
Depend on python3 and host-python3-cython for python bindings.
Remove upstream patches; rework python-makefile.patch to adhere to
git formatting and refresh for 1.14.
Update License hash due to year changes.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: rework commit log, explain switch to Github]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All patches are upstream. Tested with qemu-system-arm/qemu-system-sparc.
LEGAL license hash changed:
- drop aclocal.m4, no longer provided
- add MIT-covered works
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[yann.morin.1998@free.fr: update license hash]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The previous version bump [1] added the hash of LICENSE.txt but
forgot to update FLARE_GAME_LICENSE_FILES.
[1] 4d09d1b476
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Flare games use OGG audio file format througt SDL2-mixer.
Without OGG support, flare-engine trigger a lot of errors in its
log and fail to start the game.
ERROR: SoundManager: ItemManager: Loading sound /usr/share/flare/mods/fantasycore/soundfx/inventory/inventory_gem.ogg (soundfx/inventory/inventory_gem.ogg) failed: Unrecognized audio format
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As part of commit
4d2ca2be49 ("package/python-setuptools:
bump to version 59.8.0 and split python2 version"), the
HOST_PYTHON_SETUPTOOLS_NEEDS_HOST_PYTHON was moved next to the other
HOST_* variables, but it was also re-added at the original location
during an (incorrect) review process. Fix that up by dropping the
duplicate definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove 0013-Add-an-option-to-disable-installation-of-test-module.patch as
it is now upstreamed.
- Refactor and rename all other patches as necessary.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python setuptools 44.0 is not compatible with python 3.10. Unfortunately,
python-setuptools 59.8.0 is not compatible with python2. As Buildroot is not
ready to end python2 support, the python-setuptools package must accommodate
both the old version for python2 and the new version for python3.10.
Changes include:
- Add two new directories: package/python-setuptools/44.0.0 and
package/python-setuptools/59.8.0
- Add the appropriate patch and hash files to each directory.
- Modify python-setuptools.mk to support both setuptools 44.0 and 59.8.0
(setuptools 59.8.0 does not have a .zip on pypi anymore, only a tar.gz)
- Point the symlinks in package/python3-setuptools to the files in
package/python-setuptools/59.8.0/
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current printvars output suffers from a serious design flaw:
variables are not delimited, which makes it impossible to reliably
retrieve the value of variables; only variables that are known to
not contain a \n can be relatively safely extracted.
However, in some cases, it is important to be able to retrieve the
multi-line value of a variable, notably the CMDS or the hooks. One
such use-case (to follow in an unscheduled future) would be to hash
the variables that make up a package "configuration", and cache or
extract the files for that package to speed up the build.
Modeled after printvars and show-info, we introduce show-vars (what a
lack of imagination here) that outputs a json dictionary which keys are
the variable names, and for each variable, provides the raw and expanded
values.
Unlike printvars, we do not provide a way to get either the raw or
expanded value; both are systematically printed; a user will get just
the one is needs. Additionally, strings in JSON are quoted, so there is
no need to provide a way to quote variables; that would not make sense.
Note: for printvars, we require that the user provides an explicit
pattern to filter variables on. This is historical (see fd5bd12379,
Makefile: printvars: don't print anything when VARS is not set). The
underlying reasoning was that printvars is too "raw", and variables are
not well delimited, so printvars was mostly used to extract a few values
here and there, from scripts, or to quickly inspect a specific package's
variables during debugging.
But show-vars, although technically plain-text, being JSON, is not very
human-readable, and is mostly aimed at tools that will parse it with a
real JSON parser, and which will want to have a complete view of a lot
of variables at once. As such, and contrary to printvars, it makes sense
to report on all variables by default, unless the user explicitly
requested a subset.
As a final note: a lot of our variables only make sense in the context
of an actual make target. For example, a variable of package foo, that
contains $(@D)/bar, would expand to .../build/FOO-VERSION/bar. This is
because our CMDS and hooks are expanded as the recipe of a stamp file
that lies in the package build directory.
But for show-info, this falls flat on its face: it is not the stamp file
of a package, so there is no package directory, and show-info itself has
not directory part, so $(@D) expands to '.' (dot).
Additionally, some variables may contain calls to $(shell) (e.g. to call
pkg-config), and this also does not work with show-info.
These two issues make it impossible to emit the correct expanded value
of variables. To be noted: printvars has the exact same limitations for
the exact same reasons.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
External tools may need to peek into the source tree (to check what the
list of patches that were applied), or in the stamp directory (to check
and report on the progress of a build)
Currently, both locations are identical, but semantically different
and an internal implementation detail. Exposing both separately will
allow us to change either without breaking users' scripts. Hopefully.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, our clean-json macro does two things:
- remove excessive commas before a closing list or dictionary;
- escape the backslash.
We are going to need the comma-drop feature of clean-json, but on a
JSON blurb where all the characters, backslash included, are already
all properly escaped, so that we do not need further escape.
So, we drop the backslash escaping from clean-json, and use the newly
introduced mk-json-str helper in every locations where we turn a
Makefile variable into a JSON string.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In quite a few places, we need to generate string that are proper JSON
values or keys.
However, JSON is very strict on what constitute a string, and most JSON
parsers (like jq or python3's json module) are very picky when parsing a
string; any deviation from the spec is immediately sanctioned by a hard
error (jq aborts, python3's json module raise an exception).
Introduce a macro that properly prepares a Makefile value into a valid
JSON string:
- backslash '\' must be escaped;
- double-quotes need to be escaped of course, as they are the string
delimiter in JSON;
- anything in the range [0x00..0x1F] must be escaped; in practice, we
only ever need to escape \n, \t, and ESC (we could add more in the
future if need be);
- finally, we also escape the space, \x20, so that we can call
$(strip) on a JSON blurb (like we do for example do build a
comma-separated list, or when we sanitise the JSON) without losing
multiple spaces where they make sense.
It would have been nice if we had been able to split the macro on
multiple lines, but spaces creep in from everywhere in that case, and
getting rid of them is getting quite nasty... We could introduce
intermediate macros, but meh...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we have two functions that build a comma-separated list
of items; one is double-quoting the items, while the other is
single-quoting them. Their naming is not very consistent.
Besides, in a followup change, we will need to build a comma-separated
list of items that are already double-quoted.
Introduce a macro that does just build a comma-separated list, and
use that in the two other macros; rename the existing macro so the
naming is consistent.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Similarly to what we just did for conditionally-set-empty variables,
unconditionally setting empty variables serves no purpose in Makefiles,
as unset variables are just expanded as empty...
Even though we have numerous python packages, the speed gain was not
measurable, with delta much less than the noise.
Still, for consistency, we just do not set those variables.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Setting an unset variable to an empty value is useless in make; an unset
variable just expands to an empty string anyway. So what we do currently
has no side effect:
variable set and not empty -> variable not modified
variable set and empty -> variable not modified
variable unset -> set to an empty string
However, additional variables do have an impact on the parsing time of
the Makefiles, and the more variables, the more collisions in the hash
table used internally by make, which slows down the parsing.
By dropping those conditionally-set-empty variables, we gain about 3%:
Run Before After
1 5.572 5.325
2 5.434 5.354
3 5.490 5.320
4 5.525 5.330
5 5.476 5.330
6 5.511 5.434
7 5.498 5.388
8 5.524 5.371
9 5.479 5.346
10 5.637 5.324
Mean: 5.515 5.352
Yeah, 0.163s does not look like much, and this does not make
autocompletion any more usable. Still, that 3% gain is not to be
ashamed of either.
Note that there are 3 others case where we do set empty variables, but
those are unconditional and serve other purposes:
- pkg-virtual: this is done on purpose to avoid a bug when the
environment may have TOOLCHAIN_VERSION or _SOURCE set, and we really
want those to be empty, so the assignment is not conditional;
- pkg-python: the reason for setting those to empty is dubious at
best; it's been there since the inception of the python infra, back
in 2013; still, the case is different than this patch addresses;
- pkg-toolchain-external: this is the case for a toolchain already
installed, so indeed we want to set _SOURCE and _VERSION to empty.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package build failure has been fixed by using -mcmodel=large that is
now available in external toolchains as well as buildroot toolchains. So
we can drop its dependency on binutils 21464.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows building and running a full-scale JVM in purely
interpretive mode on ARCv2 processors.
Once JIT'ed version is available for ARC we'll obviously switch to it
to gain a faster execution.
This is only supported for OpenJDK17, so we make OpenJDK11 unavailable
on ARC. However, there was a dependency difference between OpenJDK17
and OpenJDK11 (on host gcc >= 4.9). To avoid any potential
complexities if a package ever needs to "select BR2_PACKAGE_OPENJDK",
this commit moves this host gcc >= 4.9 dependency to
BR2_PACKAGE_OPENJDK itself.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following the releases of 2021.11 Bootlin toolchains, this commit
represents the result of re-running the gen-bootlin-toolchains script.
The only part that isn't auto-generated are the contents of
Config.in.legacy, which account for the replacement of the RISC-V LP64
toolchain by RISC-V LP64D toolchains.
The complete set of runtime test cases was verified on Gitlab CI:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/437767674
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
toolchains.bootlin.com no longer provides a LP64 RISC-V 64-bit
toolchain, but a more useful LP64D RISC-V 64-bit toolchain. Of course,
the old tarballs remain available, but no new versions of the LP64
toolchain will be produced.
This commit reflects this change in the gen-bootlin-toolchains script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Already supported:
- Pushing a branch called "<foo>-defconfigs" tests all defconfigs.
- Pushing a branch called "<foo>-defconfig-<defconfig-name>" will
test one particular defconfig
This commit adds support for:
- Pushing a branch called "<foo>-defconfigs-<pattern>" which will
test all defconfigs whose name start with the pattern. For example
"<foo>-defconfigs-qemu_" will test all Qemu defconfigs
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_V4L2CODECS option has a
dependency on BR2_PACKAGE_HAS_UDEV, but no Config.in comment was added
about this dependency. This commit addresses that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add option to disable code for Intel Gen8 GPUs, reduces size of
iHD_drv_video.so from 36M to 33M.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 4ac4d6879b (package/supertuxkart: bump to version 1.3)
introduced a circular dependency chain in Kconfig:
package/openssl/Config.in:4:error: recursive dependency detected!
package/openssl/Config.in:4: symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_MBEDTLS
package/mbedtls/Config.in:1: symbol BR2_PACKAGE_MBEDTLS is selected by BR2_PACKAGE_OPENSSL
Fix by selecting openssl if mbedtls is not enabled.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some U-Boot platforms (e.g. rockchip) can bundle OPTEE's tee.elf
into the U-Boot image. This patch brings the necessary changes to
enable this feature.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit creates a symlink that ensures fontconfig will find the
fonts installed by the font-awesome package.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
radeon_present.c: In function ‘radeon_present_check_flip’:
radeon_present.c:281:21: error: invalid use of undefined type ‘struct radeon_pixmap’
281 | if (priv && priv->fb_failed)
| ^~
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
In file included from radeon_textured_video.c:37:
radeon.h: In function ‘radeon_master_screen’:
radeon.h:187:15: error: ‘struct _Screen’ has no member named ‘current_master’
187 | if (screen->current_master)
| ^~
The API/ABI have changed in xserver 21.0 due to "some badly named variables/APIs" [1].
[1] ea47af87f6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Backport from upstream.
Fixes:
minetest-5.4.1/src/clientiface.h:444:36: error: ‘shared_ptr’ in namespace ‘std’ does not name a template type
444 | ClientInterface(const std::shared_ptr<con::Connection> &con);
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop upstream patches
- Add a new patch: 0002-fix-PyTuple_SET_ITEM-usage-no-return-value.patch which
fixes python 3.10 compatibility.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Current U-Boot is an old version and fails to build:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump U-Boot to fix the problem.
Latest U-Boot has switched to distro boot and SPL, so make the necessary
changes to support it. Other advantage of bumping U-Boot is that
it also supports the other imx6ul-pico variants.
While at it, also bump U-Boot to the 5.15 LTS.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006192
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop disable urlify patch that is now upstream.
Backport missing-syscall: define all MOUNT_ATTR_* if missing patch.
Update license info based on LICENSES/README.md.
Most licenses are moved to SPDX LICENSES folder.
Add libcryptsetup-plugins support.
The efi-ld option expects either "bfd" or "gold", since we don't
support "gold" set it to "bfd" which is also the default fallback.
Set link-boot-shared to true since we build systemd at the same time
as the boot tools.
See link-boot-shared details:
7964702007
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link with -latomic if needed to avoid the following build failure since
bump to version 2.68.2 in commit
dddb65efbd:
/home/peko/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: glib/glibmm/libglibmm-2.68.so.1.3.0.p/main.cc.o: in function `Glib::Source::reference() const':
main.cc:(.text+0xd40): undefined reference to `__atomic_fetch_add_4'
Fixes:
- http://autobuild.buildroot.org/results/6a2709956fbb16ac3cbf676acb242c88f83fcdae
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the AT91BOOTSTRAP bootloader package to new released version 4.0.1
for all the supported boards (SAMA boards + SAM9X60).
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux4sam has moved to linux4microchip.
First linux4microchip release for the SAMA & SAM9X60 boards is
linux4microchip 2021.10.
Bump all boards to use this kernel version.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set HOSTCC_NOCCACHE and HOSTCXX_NOCCACHE only if they are not
set. This allows recursive calls to "make" to work as intended in the
presence of ccache. Such recursive calls to "make" can for example
happen if one calls "make legal-info" from within a post-build script,
to integrate some results of the legal-info output into the root
filesystem.
Without guarding these variables, a recursive invocation of make would
re-define
HOSTCC_NOCCACHE := $(HOSTCC)
and
HOSTCXX_NOCCACHE := $(HOSTCXX)
at a point in time when HOSTCC and HOSTCXX already point to ccache.
It used to work by "accident" until
ca6a2907c2 ("make: support: use `command
-v' instead of `which'"), due to how "which" was behaving when invoked
with multiple arguments. After switching to "command -v", which
behaves different with multiple arguments, this HOSTCC_NOCCACHE
redefinition problem surfaced. Even though
ca6a2907c2 has since then been reverted
for other reasons, it does make sense to guard the definition of
HOSTCC_NOCCACHE and HOSTCXX_NOCCACHE to not rely on a side-effect of
using "which".
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python 2 is EOL sice 2020 [1], it's still available on distros, but may
not be installed by default (as being replaced by python3). A
compatibility symlink python -> python3 may not be installed either.
Convert the shebang line to the usual /usr/bin/env based line.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To use nodejs on the host (independant of the actual system) to create
some static files to place onto the target rootfs nodejs can be very
helpful.
The provided nodejs package didn't expose the possibility to create a
host package, which this commit adds.
This patch contains fixes based on feedback from:
- Peter Seiderer <ps.report@gmx.net>
- Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Linus Kaschulla <linus@cosmos-ink.net>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 4.5, squashfs-tools provides two additional utilities:
sqfstar and sqfscat. But their functionality is bundled within
mksquashfs and unsquashfs respectively, so that sqfstar is a symlink
to sqfstar, and sqfscat a symlink to unsquashfs.
Unfortunately, due to how the symlinks were created, they had a bogus
target when INSTALL_DIR was not empty, leading to things like this:
./usr/bin/sqfscat -> /home/peko/autobuild/instance-1/output-2/target/usr/bin/unsquashfs
./usr/bin/sqfstar -> /home/peko/autobuild/instance-1/output-2/target/usr/bin/mksquashfs
Not only they are wrong, but they also cause reproducible build
issues (this is how they were detected).
This commit backports an upstream patch that fixes this problem.
This is also fixing the squashfs-tools part of the reproducible build
issues at:
http://autobuild.buildroot.net/results/00af5dca8c30b243af1e8cde3b02e264f7603442/diffoscope-results.txt
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add patch to fix linking failure while creating shared library. As
explained in the patch itself, there is no specific variable for when we
link a shared library and rebar itself rely on the default LDFLAGS. Since
by default every CFLAGS is filled with -fPIC we need to make sure that
every LDFLAGS is the same, so not having any other *_LDFLAGS variable to
fille with -fPIC let's add it to the main LDFLAGS.
Fixes:
http://autobuild.buildroot.net/results/602/60296a48210e7ffc6bc9fa50ee586441a8957e85/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a virtio-net-pci device with a user mode host network backend
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new defconfigs for sama7g5 evaluation kit.
Update README with new defconfigs.
Board uses linux 5.15 mainline.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following musl build failure raised since bump to version 6.14
in commit 5292d1cf9a:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: rngd-rngd_jitter.o: in function `rngd_notime_start':
rngd_jitter.c:(.text+0xdc2): undefined reference to `pthread_attr_setaffinity_np'
Fixes:
- http://autobuild.buildroot.org/results/3ec7df86856aa9bee2f18a8faa44fd58bc8a6657
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the gcc arc version was bumped to a version using gcc
10.x (arc-2020.09-release) in commit 0791abfba0 (toolchain: update ARC
tools to arc-2020.09-release), the select of BR2_GCC_VERSION_ARC on the
appropriate BR2_TOOLCHAIN_GCC_AT_LEAST_xyz was not updated.
Commit 0b4c7ba01c (toolchain: update option descriptions for ARC tools
arc-2020.09-release) fixed the prompt, but still forgot to update the
appropriate BR2_TOOLCHAIN_GCC_AT_LEAST_xyz.
This commit eventually fixes this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changes:
- Update LICENSE hash due to a year bump.
- Remove 0001-Look-for-pcm-core-at-the-default-path.patch in favor of
the upstream patch
0001-pmu-query.py-fix-python3-errors-add-linux-platform-s.patch
- Add -fPIC to the CXXFLAGS to prevent the error:
"msr.o: relocation R_X86_64_PC32 against symbol `_ZTVN3pcm9MsrHandleE' can
not be used when making a shared object; recompile with -fPIC"
- Depend on Python3 for the pmu-query script.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As explained in the patch itself, there is a bug in the handling of
__pselect32() in glibc for the Microblaze architecture. There a
special Microblaze variant that was added to support kernels older
than < 3.15, but it "hides" a generic implementation that is needed to
support kernels newer than 3.15 but older than 5.1 (which is when the
time64 support for 32-bit architectures was added, making __pselect32
no longer needed).
This bug causes a glibc build failure for kernels >= 3.15 but < 5.1,
on Microblaze.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable SELinux support if libselinux is selected. This allows utilities such as
ls to read and display extended attributes with ls -lZ
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2021.10.
This fixes the following error:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006170
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries
to the appropriate 'partition-type-uuid'. Then genimage starts to
complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
To fix the second genimage error report, update the size of bootloader
file. Do not reserve additional space for GPT partition table since
new genimage is able to keep track of it.
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006300
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When binutils 2.37 was introduced in commit
62f0232980 ("package/binutils: add
version 2.37"), the patch
0008-or1k-fix-pc-relative-relocation-against-dynamic-on-P.patch was
not properly updated. Indeed, between binutils 2.36 and 2.37, binutils
has switched to using the standard "bool" type, so instead of using
TRUE/FALSE, true/false must be used.
With this change, the binutils patch matches the one that was merged
upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
genimage v15 complains about the GPT overlapping with the RCW. Move it
to offset 16k which is between the rcw (which isn't expected to grow
much more) and the bootloader.
This will fix the following error:
ERROR: hdimage(sdcard-emmc.img): partition [GPT array] (offset 0x400, size 0x4000) overlaps previous partition rcw (offset 0x1000, size 0x580)
ERROR: hdimage(sdcard-emmc.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Genimage 15 deprecated the gpt option and now prints a warning when it is
used:
INFO: hdimage(sdcard.img): The option 'gpt' is deprecated. Use 'partition-table-type' instead
So change the genimage configuration files to use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935239
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
So change to partition-type-uuid instead. With that fixed, genimage-15 then
also complains about the overlap between the u-boot partition and the GPT:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
So adjust the u-boot partition to end just before the GPT.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for the upcoming Nexus version of kodi-inputstream-adaptive,
the bundled version of bento4 was removed upstream:
70625e7670
Backported upstream commit to fix cmake install as patch 0001.
Added feature- and bugfix-patches from kodi, they were sent upstream:
https://github.com/axiomatic-systems/Bento4/issues/648
Build-tested using this defconfig:
BR2_PACKAGE_BENTO4=y
andes-nds32 [ 1/45]: SKIPPED
arm-aarch64 [ 2/45]: OK
bootlin-aarch64-glibc [ 3/45]: OK
bootlin-arcle-hs38-uclibc [ 4/45]: OK
bootlin-armv5-uclibc [ 5/45]: OK
bootlin-armv7-glibc [ 6/45]: OK
bootlin-armv7m-uclibc [ 7/45]: OK
bootlin-armv7-musl [ 8/45]: OK
bootlin-m68k-5208-uclibc [ 9/45]: OK
bootlin-m68k-68040-uclibc [10/45]: OK
bootlin-microblazeel-uclibc [11/45]: OK
bootlin-mipsel32r6-glibc [12/45]: OK
bootlin-mipsel-uclibc [13/45]: OK
bootlin-nios2-glibc [14/45]: OK
bootlin-openrisc-uclibc [15/45]: OK
bootlin-powerpc64le-power8-glibc [16/45]: OK
bootlin-powerpc-e500mc-uclibc [17/45]: OK
bootlin-riscv32-glibc [18/45]: OK
bootlin-riscv64-glibc [19/45]: OK
bootlin-riscv64-musl [20/45]: OK
bootlin-sh4-uclibc [21/45]: OK
bootlin-sparc64-glibc [22/45]: OK
bootlin-sparc-uclibc [23/45]: OK
bootlin-x86-64-glibc [24/45]: OK
bootlin-x86-64-musl [25/45]: OK
bootlin-x86-64-uclibc [26/45]: OK
bootlin-xtensa-uclibc [27/45]: OK
br-arm-basic [28/45]: SKIPPED
br-arm-full-nothread [29/45]: OK
br-arm-full-static [30/45]: OK
br-i386-pentium4-full [31/45]: OK
br-i386-pentium-mmx-musl [32/45]: OK
br-mips64-n64-full [33/45]: OK
br-mips64r6-el-hf-glibc [34/45]: OK
br-powerpc-603e-basic-cpp [35/45]: OK
br-powerpc64-power7-glibc [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips64 [43/45]: OK
sourcery-mips [44/45]: OK
sourcery-nios2 [45/45]: OK
45 builds, 2 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
diff LICENSE:
-University of Cambridge Computing Service,
+Retired from University of Cambridge Computing Service,
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configuring coreutils with gl_cv_func_fstatat_zero_flag=no results in
non-functional lchmod library function which causes 'mkfifo -m' to
always complete with the message 'cannot set permissions of ...: Invalid
argument' and an error exit code. gl_cv_func_fstatat_zero_flag=no is not
needed when building coreutils-9.0 for linux and its setting should be
correctly determined by the configure script.
Drop gl_cv_func_fstatat_zero_flag=no from the coreutils configure
environment.
For more details see
https://lists.buildroot.org/pipermail/buildroot/2021-December/631388.html
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address is bouncing (and we have some private information
that explains why):
Ryan Barnett (ryan.barnett@collins.com)<mailto:ryan.barnett@collins.com>
The recipient won't be able to receive this message because it's too large.
The maximum message size that's allowed is 1 KB. This message is 7 KB.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump to version 1.6.12 in
commit f727b6da04:
logger.c: In function '_logger_parse_cce':
logger.c:297:13: error: 'rport' may be used uninitialized in this function [-Werror=maybe-uninitialized]
297 | total = snprintf(scratch, LOGGER_PARSE_SCRATCH,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
298 | "ts=%d.%d gid=%llu type=conn_close rip=%s rport=%hu transport=%s reason=%s cfd=%d\n",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
299 | (int) e->tv.tv_sec, (int) e->tv.tv_usec, (unsigned long long) e->gid,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
300 | rip, rport, transport_map[le->transport],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
301 | reason_map[le->reason], le->sfd);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/7a46ac38d10b1859034017e0294961daa8f48dd2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gstreamer backend needs dynamic library to avoid the following build
failure raised since bump to version 0.12.0 in commit
68c8c37d7d:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libc.a(__uClibc_main.os): in function `__uClibc_fini':
__uClibc_main.c:(.text+0x15c): undefined reference to `__fini_array_start'
Fixes:
- http://autobuild.buildroot.org/results/3b580c8d9cb136455c710549909bb78c8b38b9c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
COPYING has been removed since version 2.13.0 and
c0c0989ab7
resulting in the following build failure since bump to version 2.13.1 in
commit 733bf73e3f:
ERROR: COPYING has wrong sha256 hash:
ERROR: expected: 74125a84c2166300776980166e29de40d5f98d1a75e487f0bbc0c03b4cd2342e
ERROR: got :
So use the new license files, add BSD-3-Clause (which was added in
version 2.13.0 and
d8621b3ea8)
and don't add BSD-2-Clause and GPL-3.0+ as tests are disabled
Fixes:
- http://autobuild.buildroot.org/results/470d6401f2a97f4ac91b2d8cfb1af90b638320a9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cage requires wlroots to be built with X11 enabled
in order to enable XWayland, otherwise it will fail
with error:
"ERROR: Problem encountered: Cannot build Cage with
XWayland support: wlroots has been built without it"
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
[yann.morin.1998@free.fr:
- drop explicit _XORG7, as _WLROOTS_X11 depends on it
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
In file included from include/bootm.h:10:0,
from tools/image-host.c:12:
include/image.h:1178:27: fatal error: openssl/evp.h: No such file or directory
# include <openssl/evp.h>
^
compilation terminated.
scripts/Makefile.host:112: recipe for target 'tools/image-host.o' failed
make[2]: *** [tools/image-host.o] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
tests are not disabled since bump to version 2.0.24 in commit
721f05420c and
2cd716353d
resulting in the following build failure if cmocka is found:
In file included from /home/buildroot/autobuild/instance-2/output-1/build/libnetconf2-2.0.24/tests/client/test_client_ssh.c:8:
/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/cmocka.h:2334:47: error: unknown type name 'va_list'
2334 | void vprint_message(const char* const format, va_list args) CMOCKA_PRINTF_ATTRIBUTE(1, 0);
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/fe793ae69d952a7a07d6d07e179925b67469dff4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a patch to disable building tests, building the tests can
fail unless the package is reconfigured.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
*) SECURITY: CVE-2021-44790: Possible buffer overflow when parsing
multipart content in mod_lua of Apache HTTP Server 2.4.51 and
earlier (cve.mitre.org)
A carefully crafted request body can cause a buffer overflow in
the mod_lua multipart parser (r:parsebody() called from Lua
scripts).
The Apache httpd team is not aware of an exploit for the
vulnerabilty though it might be possible to craft one.
This issue affects Apache HTTP Server 2.4.51 and earlier.
Credits: Chamal
*) SECURITY: CVE-2021-44224: Possible NULL dereference or SSRF in
forward proxy configurations in Apache HTTP Server 2.4.51 and
earlier (cve.mitre.org)
A crafted URI sent to httpd configured as a forward proxy
(ProxyRequests on) can cause a crash (NULL pointer dereference)
or, for configurations mixing forward and reverse proxy
declarations, can allow for requests to be directed to a
declared Unix Domain Socket endpoint (Server Side Request
Forgery).
This issue affects Apache HTTP Server 2.4.7 up to 2.4.51
(included).
For more details, see the changes file:
https://downloads.apache.org/httpd/CHANGES_2.4.52
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove upstream patches [1][2].
tinyxml has been replaced by pugixml [3].
Switch to git download method since github release without
the complete source code in the tarball [4].
Update indentation of hash file (two spaces).
Previous ogre version unconditionally include <sys/sysctl.h>
header that has been removed from glibc since 2.32.
This has been fixed since Ogre 1.12.7 [5].
[1] de4d5c920e
[2] 3f182b7e74
[3] 3381033240
[4] https://github.com/OGRECave/ogre/issues/1332#issuecomment-563189058
[5] 8ec086e9bc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
janus-gateway is vulnerable to Improper Neutralization of Input During
Web Page Generation ('Cross-site Scripting')
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- A vulnerability (GHSL-2021-1038) in the HTML cleaner allowed sneaking
script content through SVG images (CVE-2021-43818).
- A vulnerability (GHSL-2021-1037) in the HTML cleaner allowed sneaking
script content through CSS imports and other crafted constructs
(CVE-2021-43818).
https://github.com/lxml/lxml/blob/lxml-4.6.5/CHANGES.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without stack-protector raised since
bump to version 3.3.1 in commit 3965f09cb4
and
5b3cb7f35e:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: src/jitterentropy-base.o: in function `jent_fips_enabled':
jitterentropy-base.c:(.text+0x131): undefined reference to `__stack_chk_fail_local'
If stack-protector is enabled in the Buildroot config, the toolchain
wrapper will make sure it is used, so there's no need for the
jitterentropy-library Makefile to handle it.
Fixes:
- http://autobuild.buildroot.org/results/8de/8dee462d16d934dd173d58f17933c6911e4336bf/build-end.log
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- introspection support is needed to build latest rygel version
- build vala bindings to avoid a build failure as already done in other
packages such as gssdp in commit
d513e55930
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
support/testing/tests/package/test_php_lua.py:35:1: E302 expected 2 blank lines, found 1
Add the missing line before class definition.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Evan has privately requested to no longer receive e-mails related to
this Buildroot package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS dependency was wrongly added to
BR2_PACKAGE_HOST_IMAGEMAGICK by commit
df20e45463, indeed host-librsvg is only
needed by BR2_PACKAGE_HOST_IMAGEMAGICK_SVG
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2021-4048: An out-of-bounds read flaw was found in the CLARRV,
DLARRV, SLARRV, and ZLARRV functions in lapack through version 3.10.0,
as also used in OpenBLAS before version 0.3.18. Specially crafted inputs
passed to these functions could cause an application using lapack to
crash or possibly disclose portions of its memory.
It should be noted that commit 59a1fcc696
wrongly assumed that this CVE was fixed in version 3.10.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with glibc >= 2.34:
In file included from timerobj.c:32:
In function 'threadobj_set_current',
inlined from 'server_prologue' at timerobj.c:94:2:
../../include/copperplate/threadobj.h:252:9: error: 'pthread_setspecific' expecting 1 byte in a region of size 0 [-Werror=stringop-overread]
252 | pthread_setspecific(threadobj_tskey, thobj);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/ed93f916eda304b30f320816c85d1b0d4488c699
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The kernel now has support for dma, ethernet, i2c, mmc, pinctrl, regulator,
so enable drivers for those, change to a ext4 rootfs and enable DHCP on
eth0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
fix the following error:
ERROR: hdimage(sdcard.img): partition [MBR] (offset 0x1b8, size 0x48) overlaps previous partition bl1 (offset 0x0, size 0xc200)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
which started at the genimage version bump to 15 commit.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935217
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This adds support for aptX (HD) decoder / encoder powered by the
libopenaptx library.
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds support for libopenaptx, an aptX encoder and decoder.
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
[Thomas:
- drop patches that added a CMakeLists.txt and instead use the
Makefile provided by upstream.
- add !BR2_STATIC_LIBS dependency
- add entry in DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rename the configuration to explicitly distinguish between sd and xip.
As a result, the readme files have also been changed.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel generated by the configuration for the STM32f429-discovery
board is buggy:
Fixes:
Unhandled exception: IPSR = 00000006 LR = fffffff1
CPU: 0 PID: 1 Comm: init Not tainted 4.11.0 #2
Hardware name: STM32 (Device Tree Support)
task: 9041a000 task.stack: 907c0000
PC is at ret_fast_syscall+0x2/0x4a
LR is at tty_ioctl+0x1ad/0x75c
pc : [<0800d942>] lr : [<080c2e05>] psr: 4000000b
sp : 907c1fa8 ip : 0000001c fp : 905961a2
r10: 00000000 r9 : 907c0000 r8 : 0800dae0
r7 : 00000036 r6 : 905e7e60 r5 : 00000000 r4 : 905e7ebc
r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000
xPSR: 4000000b
CPU: 0 PID: 1 Comm: init Not tainted 4.11.0 #2
Hardware name: STM32 (Device Tree Support)
[<0800fbf9>] (unwind_backtrace) from [<0800f05b>] (show_stack+0xb/0xc)
[<0800f05b>] (show_stack) from [<0800f553>] (__invalid_entry+0x4b/0x4c)
Inspired by commit a3e3d9c198 ("configs/stm32f469_disco_xip_defconfig:
alternative defconfig for XIP"), update the stm32f429_disco_defconfig
configuration to use a newer kernel. Current setup kernel + rootfs fits
in 1.6MB on-chip flash memory.
The kernel has been moved to new flash bank due to growth of dtb size.
Remove upstream patch.
For better binary size optimization gcc LTO is turned on.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Newer versions of the kernel generate device trees that are not
storable in a single 16kB sector. In these cases the kernel load address
must be changed.
The commit 2e499dcff3ef ("Add possibility to use custom kernel load address")
adds the possibility to override the default (0x08008000) kernel load
address.
This also required changes to the stm32f429_disco_defconfig and
stm32f469_disco_xip_defconfig configurations. Patching is no longer
needed.
Also update whitespaces in hash file (2 spaces).
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current configuration fails to boot on the stm32f469-disco board.
Make it bootable again by reverting the DRAM patches.
Also change the kernel load address from 0x8010000 to 0x800C000 to
allocate more space to the kernel, since 32kB for the device tree is
enough.
Also clean up the rootfs a bit with the common stm32-post-build.sh
script.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Fix CVE-2021-42717: ModSecurity 3.x through 3.0.5 mishandles
excessively nested JSON objects. Crafted JSON objects with nesting
tens-of-thousands deep could result in the web server being unable to
service legitimate requests. Even a moderately large (e.g., 300KB)
HTTP request can occupy one of the limited NGINX worker processes for
minutes and consume almost all of the available CPU on the machine.
Modsecurity 2 is similarly vulnerable: the affected versions include
2.8.0 through 2.9.4.
- Use official tarball and so drop autoreconf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Probably due to bogus merge conflicts, Hervé Codina ended up having
two entries in the DEVELOPERS file. This commit brings back all files
watch by Hervé under the same entry.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
They are currently expressed as such:
depends on (BR2_ENABLE_LOCALE && BR2_USE_WCHAR)
which is not the common practice in Buildroot. We prefer to use:
depends on BR2_ENABLE_LOCALE
depends on BR2_USE_WCHAR
This commit ensures linux-pam is consistent with this best practice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_PACKAGE_LINUX_PAM depends on BR2_USE_MMU, but this dependency is
not taken into account in the Config.in comment, which this commit
fixes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
select BR2_PACKAGE_MESA3D_DRI3 for all gallium/kmsro drivers in case
X11 is selected, see meson.build:
240 with_gallium_kmsro = with_gallium_v3d or with_gallium_vc4 or with_gallium_etnaviv or with_gallium_panfrost or with_gallium_lima or with_gallium_freedreno
[...]
524 if with_gallium_kmsro and (with_platform_x11 and not with_dri3)
525 error('kmsro requires dri3 for X11 support')
526 endif
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=13831
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add config option for DRI3 support and use it instead
of DRI3 enable/disable logic in *.mk file.
Move the libxshmfence dependency to the DRI3 option, cfr. the following
in meson.build:
if with_dri3
...
dep_xshmfence = dependency('xshmfence', version : '>= 1.1')
endif
Also select DRI3 in the Vulkan Intel driver.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout: make it a blind option, move xshmfence select to dri3]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While adding this package with commit[1] Microblaze architecture has been
disabled by default pointing that it suffers from gcc ICE, but this is not
true, indeed the build error is referred to libgeos that is postgis
dependency:
```
during RTL pass: reload
.../bootlin-microblazeel-uclibc/build/libgeos-3.9.0/src/geom/util/Densifier.cpp: In static member function ‘static std::unique_ptr<std::vector<geos::geom::Coordinate> > geos::geom::util::Densifier::densifyPoints(geos::geom::Coordinate::Vect, double, const geos::geom::PrecisionModel*)’:
.../bootlin-microblazeel-uclibc/build/libgeos-3.9.0/src/geom/util/Densifier.cpp:128:1: internal compiler error: in gen_reg_rtx, at emit-rtl.c:1155
128 | }
| ^
```
This build error has been worked around with this commit[2] and I've just
tested this build with Microblaze gcc 9.3/9.4/10.3 and 11.2 and it builds
succesfully since the bug above is gcc bug 90620[3] and it's been handled
in libgeos already.
So let's allow Microblaze(el/be) to build this postgis.
[1]: https://git.buildroot.net/buildroot/commit/?id=9bb1034455de299876dfd03c5074d8bb9622f873
[2]: https://git.buildroot.net/buildroot/commit/?id=847b441b1ca2230c4f26a49aaede69eca5e7e7ad
[3]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90620
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with help2man raised since bump to
version 1.26.0 in commit be76508af2:
FAILED: docs/man/mbimcli.1
/usr/bin/help2man --output=docs/man/mbimcli.1 '--name=Control MBIM devices' '--help-option="--help-all"' /home/peko/autobuild/instance-1/output-1/build/libmbim-1.26.0/build/src/mbimcli/mbimcli
help2man: can't get `"--help-all"' info from /home/peko/autobuild/instance-1/output-1/build/libmbim-1.26.0/build/src/mbimcli/mbimcli
Try `--no-discard-stderr' if option outputs to stderr
Fixes:
- http://autobuild.buildroot.org/results/eaa2ba54b9c74f07292d3cad4fa96c80e6079702
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
BMP and NHRPD default to enabled. Both of them require c-ares. However,
if BMP and NHRPD are disabled, it is possible to build without c-ares.
Create user-visible configuration options for BMP and NHRPD and only
depend on c-ares if either of them is selected.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ICU build scripting adds some host libraries to LD_LIBRARY_PATH by
using constructs of the following form:
LD_LIBRARY_PATH="custom-path:${LD_LIBRARY_PATH}"
If the original LD_LIBRARY_PATH is empty, this causes the last search
directory be an empty string, i.e. the working directory.
ICU build runs some basic host commands (e.g. "rm") in $(TARGET_DIR)/lib
under such an LD_LIBRARY_PATH, causing target libraries (e.g. libc) to
possibly get loaded instead of host system libraries if they are
compatible enough (e.g. arch matches).
Since the target libraries may not actually be ABI compatible with host
system binaries (e.g. target has an old libc), this can cause crashes
or other errors.
Observed errors include:
(1) rm: libc.so.6: version `GLIBC_2.33' not found (required by rm)
(2) sh: line 1: 1362670 Segmentation fault (core dumped) rm -f libicudata.so.65
Workaround the issue by setting a dummy LD_LIBRARY_PATH when it would
otherwise be empty.
https://unicode-org.atlassian.net/browse/ICU-21417
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised with help2man since bump to
version 1.30.0 in commit 50c5495f81:
FAILED: docs/man/qmicli.1
/usr/bin/help2man --output=docs/man/qmicli.1 '--name=Control QMI devices' '--help-option="--help-all"' /home/peko/autobuild/instance-1/output-1/build/libqmi-1.30.2/build/src/qmicli/qmicli
help2man: can't get `"--help-all"' info from /home/peko/autobuild/instance-1/output-1/build/libqmi-1.30.2/build/src/qmicli/qmicli
Try `--no-discard-stderr' if option outputs to stderr
Fixes:
- http://autobuild.buildroot.org/results/15818b6de7378cd75c59b1d6dc732ed9a20c092a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following vulnerabilities:
* CVE-2021-4008/ZDI-CAN-14192 SProcRenderCompositeGlyphs out-of-bounds
access
The handler for the CompositeGlyphs request of the Render extension does
not properly validate the request length leading to out of bounds memory
write.
* CVE-2021-4009/ZDI-CAN 14950 SProcXFixesCreatePointerBarrier out-of-bounds
access
The handler for the CreatePointerBarrier request of the XFixes extension
does not properly validate the request length leading to out of bounds
memory write.
* CVE-2021-4010/ZDI-CAN-14951 SProcScreenSaverSuspend out-of-bounds access
The handler for the Suspend request of the Screen Saver extension does not
properly validate the request length leading to out of bounds memory
write.
* CVE-2021-4011/ZDI-CAN-14952 SwapCreateRegister out-of-bounds access
The handlers for the RecordCreateContext and RecordRegisterClients
requests of the Record extension do not properly validate the request
length leading to out of bounds memory write.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2021-December/003122.html
Builds without systemd unfortunately got broken. Add a patch fixing that
from an upstream merge request:
https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/827
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* drop all upstreamed patches
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Fix CVE-2021-4048: An out-of-bounds read flaw was found in the CLARRV,
DLARRV, SLARRV, and ZLARRV functions in lapack through version 3.10.0,
as also used in OpenBLAS before version 0.3.18. Specially crafted
inputs passed to these functions could cause an application using
lapack to crash or possibly disclose portions of its memory.
- Update license hash, year changed:
f67034373e
- Update indentation in hash file (two spaces)
http://netlib.org/lapack/lapack-3.10.0.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition...
scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Tested on beaglebone black and beaglebone white (A6)
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 1.9.5 in
commit c7233ec2c3 and
6f8f170db3:
/home/giuliobenetti/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: pcscd-pcscdaemon.o: in function `signal_thread':
pcscdaemon.c:(.text+0x444): undefined reference to `HPReCheckSerialReaders'
Fixes:
- http://autobuild.buildroot.org/results/6cf323229f32967aa554418410dc94b7094d09af
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Minor bugfix release:
Changes between 1.1.1l and 1.1.1m [14 Dec 2021]
*) Avoid loading of a dynamic engine twice.
[Bernd Edlinger]
*) Fixed building on Debian with kfreebsd kernels
[Mattias Ellert]
*) Prioritise DANE TLSA issuer certs over peer certs
[Viktor Dukhovni]
*) Fixed random API for MacOS prior to 10.12
These MacOS versions don't support the CommonCrypto APIs
[Lenny Primak]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add xxhash mandatory dependency to avoid the following build failure
with the embedded xxhash (in version 0.8.1) and uclibc raised since
bump to version 1.4.63 in commit
2a00246645 and
23b07fa3ef:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: src/lighttpd.p/algo_xxhash.c.o: in function `XXH32_canonicalFromHash':
/home/buildroot/autobuild/instance-0/output-1/build/lighttpd-1.4.63/build/../src/algo_xxhash.h:2282: undefined reference to `static_assert'
Fixes:
- http://autobuild.buildroot.org/results/7b644dce244a1aa4a193a3196059a56b2c4c7591
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Install xxhash in staging to allow lighttpd to use it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
- cgi_error_no_template(): Encode the template name to prevent
XSS (cross-site scripting) when Privoxy is configured to servce
the user-manual itself.
Commit 0e668e9409c. OVE-20211102-0001. CVE-2021-44543.
Reported by: Artem Ivanov
- get_url_spec_param(): Free memory of compiled pattern spec
before bailing.
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit 652b4b7cb0. OVE-20211201-0003. CVE-2021-44540.
- process_encrypted_request_headers(): Free header memory when
failing to get the request destination.
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit 0509c58045. OVE-20211201-0002. CVE-2021-44541.
- send_http_request(): Prevent memory leaks when handling errors
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit c48d1d6d08. OVE-20211201-0001. CVE-2021-44542.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
- CVE-2021-44420: Potential bypass of an upstream access control based on
URL paths
HTTP requests for URLs with trailing newlines could bypass an upstream
access control based on URL paths.
This issue has low severity, according to the Django security policy.
https://www.djangoproject.com/weblog/2021/dec/07/security-releases/
In addition, 3.2.8 / 3.2.9 fixes a number of bugs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop 0030-Fix-cross-compiling-the-uuid-module.patch as the patched code has
been reworked upstream and python3 is built with --disable-uuid:
91a51c5ffc
Rework 0033-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch as
the MULTIARCH code is now conditional on !darwin:
9901d153c2
Refresh and renumber remaining patches.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
connman might depend on iptables or nftables, and those dependencies
are already selected later in this file as required.
Config.in already only selects iptables if BR2_PACKAGE_CONNMAN_IPTABLES.
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with gcc 4.8 raised since the addition
of the package in commit e821078031:
In file included from framebuffer.cc:20:0:
framebuffer-internal.h:83:10: error: 'constexpr' does not name a type
static constexpr int kBitPlanes = 11;
^
framebuffer-internal.h:83:10: note: C++11 'constexpr' only available with -std=c++11 or -std=gnu++11
Fixes:
- http://autobuild.buildroot.org/results/c035da0d183f21343f19f7dee982e8e73ee781e4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
TARGET_LDFLAGS is overriden since the addition of the package in commit
8d66bc940d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop spurious "depends on WCHAR" added with commit
ccfc90e101 and adds missing wchar comment
While at it, drop BR2_USE_MMU from comment as it is already added by
BR2_PACKAGE_LIBVIRT_ARCH_SUPPORTS and fix indentation before
(BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_11 || !BR2_aarch64))
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- rebase (and change to git format) 0001-Fix-default-config-file.patch/
0001-Modify-the-default-lighttpd-configuration-file-to-ha.patch
For details see [1].
[1] https://www.lighttpd.net/2021/12/4/1.4.63/
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add patch to fix struct _Window::backStorage related compile failure.
Since xserver commit 'dix: Remove WindowRec::backStorage ' ([1])
struct _Window::backStorage is gone, use struct _Window::backingStore instead.
Fixes:
backing_store_tuner.c: In function 'xPostValidateTree':
backing_store_tuner.c:112:48: error: 'struct _Window' has no member named 'backStorage'
112 | if (!private->ForceBackingStore && focusWin->backStorage) {
| ^~
backing_store_tuner.c:128:20: error: 'struct _Window' has no member named 'backStorage'
128 | if (!curWin->backStorage && (private->ForceBackingStore ||
| ^~
backing_store_tuner.c: In function 'xReparentWindow':
backing_store_tuner.c:161:46: error: 'struct _Window' has no member named 'backStorage'
161 | if (pPriorParent == pScreen->root && pWin->backStorage) {
| ^~
[1] 6975807945
Reported-by: Jürgen Wack <juergen.wack@gmx.de>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- bump version to 1.71
- change home page and download URL to https
Changelog (since 1.71):
- 1.71, Added SMI bus support, courtesy of Benoit Bouchez, including new
functions: bcm2835_smi_begin(), bcm2835_smi_end(), bcm2835_smi_set_timing(),
bcm2835_smi_write(), bcm2835_smi_read().
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Beaglebone Black Wireless needs a specific DT, which u-boot tries to
load based on the board name. Make sure we ship the DT so that we can
boot on that platform.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- disable examples source which is enabled by default since
feb8c15b45
- mbedtls is an optional dependency since
f601ddbf78
- Add Apache-2.0 for mbedtls to LICENSE:
0fccf2e713
Since mbedtls is not bundled but comes from the Buildroot package, we
don't need to declare the Apache-2.0 license for libcoap. It only
applies to mbedtls.
https://github.com/obgm/libcoap/blob/v4.3.0/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Support for dosfstools is added by the system/fstools module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Support for gnupg2 is added by the apps/gpg module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Support for gnupg is added by the apps/gpg module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following static build failure raised since bump to version
1.9.5 in commit 3db4d486d6:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libc.a(__uClibc_main.os): in function `__uClibc_fini':
__uClibc_main.c:(.text+0x15c): undefined reference to `__fini_array_start'
Fixes:
- http://autobuild.buildroot.org/results/18d26882a68dcf8f09b3e3d25636454a12939310
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Mutt 2.1.4 was released on December 11, 2021. This is a bug-fix release,
fixing a performance issue when used with DavMail.
Mutt 2.1.3 was released on September 10, 2021. This is a bug-fix
release, fixing some of the fixes in the last release. IMAP and
QRESYNC users are advised to upgrade.
Mutt 2.1.2 was released on August 24, 2021. This is an important bug-fix
release, fixing a potential data-loss IMAP bug, a couple QRESYNC bugs,
and a few other issues. IMAP users are strongly advised to upgrade.
http://www.mutt.orghttps://gitlab.com/muttmua/mutt/-/blob/mutt-2-1-4-rel/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch has been added to buildroot more than eleven years ago in commit
e9ae739ce7 however it seems that rp-pppoe
builds perfectly fine without it nowadays.
- ac_cv_linux_kernel_pppoe=no just gives a warning;
- HAVE_LINUX_KERNEL_PPPOE is set by configure based on the presence of
the appropriate header.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
<roman.gorbenkov@ens2m.org>: host mxd.relay.renater.fr[194.214.200.9] said: 550
5.5.0 Requested actions not taken as the mailbox is unavailable (in reply
to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
go1.17.4 (released 2021-12-02) includes fixes to the compiler, linker, runtime,
and the go/types, net/http, and time packages.
go1.17.5 (released 2021-12-09) includes security fixes to the syscall and
net/http packages:
- CVE-2021-44716
- CVE-2021-44717
https://go.dev/doc/devel/release#go1.17
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
1) Now u-boot needs SCP environment variable specified that can point to
the or1k coprocessor firmware while if coprocessor is not used it must
be passed /dev/null as we do in this case.
2) We now use the u-boot-sunxi-with-spl.bin instead of u-boot.itb since
it's produced by u-boot anymore.
3) U-Boot 2021.10 requires python 3 and openssl so let's enable them.
4) Remove local patches for uboot and linux.
5) Remove global patches path from defconfig.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add myself to DEVELOPERS as maintainer of davinci-bootcount.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following musl build failure raised since bump of pppd to
version 2.4.9 in commit 075b01f2f7:
In file included from pppoe.h:133,
from debug.c:19:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/netinet/if_ether.h:116:8: error: redefinition of 'struct ethhdr'
116 | struct ethhdr {
| ^~~~~~
In file included from pppoe.h:121,
from debug.c:19:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/linux/if_ether.h:163:8: note: originally defined here
163 | struct ethhdr {
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/ccca18fcbcde65cb6784f5559eac68ca17ab14a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The mainline U-Boot can create an i.MX specific firmware image (e.g. flash.bin).
For this the i.MX firmware files must be in the toplevel directory.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The copy command for /usr/share/alsa missing an asterisk cause it to copy to
/usr/share/alsa/alsa instead of /usr/share/alsa where it should be.
Signed-off-by: Khoa Hoang <admin@khoahoang.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add dependency on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 to assure
std::exception_ptr support (the only in-tree assimp dependency
in package/qt5/qt53d is optional already).
Fixes:
- http://autobuild.buildroot.net/results/0cc9cab2761591af57d6d6744a0dd61b7c60e935
In file included from .../build/assimp-5.1.0/include/assimp/GenericProperty.h:52:0,
from .../build/assimp-5.1.0/code/Common/BaseProcess.h:46,
from .../build/assimp-5.1.0/code/Common/BaseProcess.cpp:44:
.../build/assimp-5.1.0/include/assimp/Importer.hpp:522:11: error: 'exception_ptr' in namespace 'std' does not name a type
const std::exception_ptr& GetException() const;
^
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since the addition of the package
in commit e821078031:
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-buildroot-linux-gnu/9.3.0/../../../../aarch64-buildroot-linux-gnu/bin/ld: led-matrix.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `_ZTVN10rgb_matrix11FrameCanvasE' which may bind externally can not be used when making a shared object; recompile with -fPIC
Fixes:
- http://autobuild.buildroot.org/results/be291d6b0efdc1914babfb4a9be5eb863058eaf5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CMSIS-DAP support depends on hidapi, but this package has depends on
udev so instead of adding this option by default, this let user decide.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Arnout: also propagate hidapi's NPTL dependency]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 5.6.5 in
commit 736932c715:
In file included from /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/string.h:631:0,
from arg_check.c:31:
dmalloc.h:377:7: error: expected identifier or '(' before '__extension__'
char *strdup(const char *string);
^
This build failure is raised because 0004-fix-strdup.patch was wrongly
removed and because configure.ac wrongly assumes that strdup macro is
not available when cross-compiling
As configure.ac can't be patched because autoreconf is not working,
patch configure as already done in DMALLOC_POST_PATCH. An upstream patch
on configure.ac will be sent as soon as upstream merges this old PR:
https://github.com/j256/dmalloc/pull/44
Fixes:
- http://autobuild.buildroot.org/results/00565c4b0618ea5f553d8c22284637b6574e4a93
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch bumps Linux CIP RT kernel to version 5.10.83-cip1-rt1.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch bumps Linux CIP to version 5.10.83-cip1.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is needed for watchdogd to work with SELinux.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Acked-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is needed for polkit to work with SELinux.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In Keepalived through 2.2.4, the D-Bus policy does not sufficiently
restrict the message destination, allowing any user to inspect and
manipulate any property. This leads to access-control bypass in some
situations in which an unrelated D-Bus system service has a settable
(writable) property
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changelog ([1]):
- fix some HAVE_IPV6 conditional changes
- fix SO_TIMEOUT regressiony
- ren sockets.c to socket_io.c
- fix compile breakage per abs() returning an int instead of float
- support for gettcpinfo on Mac OS X (tested on both M1 and x86 silicon)
- move setsock_blocking from sockets into PerfSocket.cpp
- don't require -V for v6, instead try v6 when v4 hostname lookup fails,
client only
- add assert in writen
- add tcp RTT variance to client output
- use setsockopt to get the nagle status
- show Nagle and TOS settings on client
- more on connect-only testing
- sample and output the initial rtt and cwnd in the connect report
- fix multiple fullduplex regressions
- fix for HAVE_TCP_STATS in configure, then linux compile
- writen can have more than one write, fix accounting when this occurs
- fix tos with --reverse and --full-duplex
- add support for --tos-override <value> on server
- add support for --tcp-drain, add mmm stats, histograms - experimental
feature
- multiple man page updates
- fix partial histogram print to not show (f)
- some new scripts in python flows
- fixes to incr-srcport
- fixes for --incr-dstport
- fix regression on very first UDP packet having transit latency of zero
- fix --reverse and --isochronous when --trip-times not set
- fix client_init regression, pull out tcp_shutdown
- fix reporter startup race and one second delay by setting the threads
ready predicate and issuing the signal under a lock
- fix first send accounting for small -n
- fix configure.ac to use '=' instead of '=='
[1] https://sourceforge.net/projects/iperf2/files/readme.txt/download
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove patches which are now included in version 2.2.0 and no longer
needed.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new release includes a number of improvements. Release notes:
https://wpewebkit.org/release/cog-0.12.0.html
Small tweaks were needed due to the "fdo" platform backend being renamed
as "wl"; the symbol is kept as BR2_PACKAGE_COG_PLATFORM_FDO to avoid
breaking existing configurations. Also the new version supports building
with libsoup3, which is not yet packaged in Buildroot, so -DUSE_SOUP2=ON
is always passed to CMake.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* update patch 0001 to match changed target code
* BSD-3c and MPL-2.0 licenses were added to LICENSE
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some of the third party code is BSD-licensed. In addition, the roots.pem
certificate store is MPL-licensed.
This was probably already the case in earlier versions as well, but it
was only noticed while updating to 1.42.0 because the LICENSE file was
adapted for it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In case Qt support is enabled use '-std=gnu++11' instead of '-std=c++11' to
enable c++11 support and gain support of the typeof GNU extension.
Fixes:
- http://autobuild.buildroot.net/results/2d58906a1eefdf921b42f6c0d9fd680ef2ad6e27
In file included from v4l2-ctl-streaming.cpp:14:
../../utils/common/v4l2-tpg.h: In function 'void tpg_s_hue(tpg_data*, s16)':
../../utils/common/v4l2-tpg.h:49:2: error: 'typeof' was not declared in this scope
49 | typeof(val) __val = (val); \
| ^~~~~~
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It is possible that some users of buildroot have put it in a repository
and call into it from another Makefile such as:
.DEFAULT:
$(MAKE) O=$(abspath $(O)) -C buildroot $(@)
This technique works well except that Make tells us that it changes into
the buildroot directory:
make[1]: Entering directory 'buildroot'
Because this line doesn't have an equals within it, python raises a
ValueError exception within pkg-stats.
This patch has python tell the invoked make not to print directories
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Comment out iface setting, usually not what you want
- Update DynDNS example, show use of multiple hostnames
- Add FreeDNS sample config, free and stable service
- Add link to syntax and examples
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, by following the instructions in the manual and querying for
developers for a patch that changes path
package/foobar
the script reports both developers that have these entries in the
DEVELOPERS file:
F: package/foo/
F: package/foobar/
Starting from commit "afc112b0e4 utils/getdeveloperlib.py: fix issue
with hasfile()" get-developers script uses os.path.abspath() and
os.path.relpath().
The catch is that those functions return the absolute path and the
relative path without the trailing slash.
When the paths associated to a developer are then compared to the paths
a patch touches, using the string.startswith(), any substring returns
True, leading to developers for package/foo/ being wrongly reported
for package/foobar/ .
Fix this by re-adding the trailing slash after using relpath().
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: James Knight <james.d.knight@live.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since a long time, we have a check-package check for patches. Make sure
that this check runs in 'make check-package', by including *.patch in
the find expression.
There are still a number of patches without SoB, and these are not so
trivial to fix, so for now, disable the SoB check.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Ricardo: do not run check for SoB for now]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
As reported by check-package (by calling it directly):
generate your patches with 'git format-patch -N'
Change all affected files using this command:
$ sed 's,^\(Subject: *\[PATCH\)[^]]*,\1,g' \
-i $(find * -name '*.patch' -type f)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As reported by check-package (by calling it directly):
use name <number>-<description>.patch
Output of:
make screen-dirclean screen-patch | grep 'Patching\|Applying'
Before:
>>> screen 4.8.0 Patching
Applying 0001-no-memcpy-fallback.patch using patch:
Applying 0002-install-no-backup-binary.patch using patch:
Applying 0003-install-always-chmod.patch using patch:
Applying 0004-install-nonversioned-binary.patch using patch:
Applying 0005-rename-sched_h.patch using patch:
Applying 0006-comm-h-now-depends-on-term-h.patch using patch:
Applying 0007-comm.h-needed-for-list_-display-generic-.o.patch using patch:
Applying 0008_CVE-2021-26937.patch using patch:
After:
>>> screen 4.8.0 Patching
Applying 0001-no-memcpy-fallback.patch using patch:
Applying 0002-install-no-backup-binary.patch using patch:
Applying 0003-install-always-chmod.patch using patch:
Applying 0004-install-nonversioned-binary.patch using patch:
Applying 0005-rename-sched_h.patch using patch:
Applying 0006-comm-h-now-depends-on-term-h.patch using patch:
Applying 0007-comm.h-needed-for-list_-display-generic-.o.patch using patch:
Applying 0008-CVE-2021-26937.patch using patch:
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As reported by check-package (by calling it directly):
use name <number>-<description>.patch
Output of:
make lpc32xxcdl-dirclean lpc32xxcdl-patch | grep 'Patching\|Applying'
Before:
>>> lpc32xxcdl 2.11 Patching
Applying lpc32xxcdl-2.11-compiler_name.patch using patch:
Applying lpc32xxcdl-2.11-delete_redundant_files.patch using patch:
Applying lpc32xxcdl-2.11-libnosys_gnu.patch using patch:
Applying lpc32xxcdl-2.11-slashes.patch using patch:
After:
>>> lpc32xxcdl 2.11 Patching
Applying 0001-compiler_name.patch using patch:
Applying 0002-delete_redundant_files.patch using patch:
Applying 0003-libnosys_gnu.patch using patch:
Applying 0004-slashes.patch using patch:
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patch (already in version).
Add new dependencies:
- host-autoconf-archive
- libevdev
- upower
- xz (liblzma)
Create a pre-configure hook to avoid this error when reconfiguring:
automake: error: cannot open < gtk-doc.make: No such file or directory
Based on the solution used in 178eb1d7ea.
During the build gtk-doc is already disabled by pkg-autotools.
Create a post-patch hook to avoid this error when reconfiguring:
aclocal: error: couldn't open directory 'm4': No such file or directory
Based on the solution used in 6bf74ce3db.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot implements a boot count scheme that can be used to detect
multiple failed attempts to boot Linux. On Davinci platform (TI AM 335x)
the `bootcount' value is stored in the RTC SCRATCH2 register. This tool
allows to read and write this register from userspace.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
[Arnout: use github helper, add license hash, remove unnecessary
defaults, add autoreconf comment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix CVE-2021-43784: runc is a CLI tool for spawning and running
containers on Linux according to the OCI specification. In runc, netlink
is used internally as a serialization system for specifying the relevant
container configuration to the `C` portion of the code (responsible for
the based namespace setup of containers). In all versions of runc prior
to 1.0.3, the encoder did not handle the possibility of an integer
overflow in the 16-bit length field for the byte array attribute type,
meaning that a large enough malicious byte array attribute could result
in the length overflowing and the attribute contents being parsed as
netlink messages for container configuration. This vulnerability
requires the attacker to have some control over the configuration of the
container and would allow the attacker to bypass the namespace
restrictions of the container by simply adding their own netlink payload
which disables all namespaces. The main users impacted are those who
allow untrusted images with untrusted configurations to run on their
machines (such as with shared cloud infrastructure). runc version 1.0.3
contains a fix for this bug. As a workaround, one may try disallowing
untrusted namespace paths from your container. It should be noted that
untrusted namespace paths would allow the attacker to disable namespace
protections entirely even in the absence of this bug.
https://github.com/opencontainers/runc/releases/tag/v1.0.3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently this .mk snippet results in unexpected behavior from
check-package:
|VAR_1 = VALUE1
|ifeq (condition)
|VAR_1 := $(VAR_1), VALUE2
|endif
Fix commit "163f160a8e utils/{check-package, checkpackagelib}:
consistently use raw strings for re.compile" that ended up doing this:
- CONCATENATING = re.compile("^([A-Z0-9_]+)\s*(\+|:|)=\s*\$\(\\1\)")
+ CONCATENATING = re.compile(r"^([A-Z0-9_]+)\s*(\+|:|)=\s*\$\(\\1\)")
But raw strings do not expect escaping when referencing \1 and the
pattern ends up searching for a raw '\\1' instead of an occurrence of
the first pattern inside parenthesis.
|$ python3
|Python 3.8.10 (default, Sep 28 2021, 16:10:42)
|[GCC 9.3.0] on linux
|Type "help", "copyright", "credits" or "license" for more information.
|>>> import re
|>>> p1 = re.compile('(foo)bar\\1')
|>>> p2 = re.compile(r'(foo)bar\\1')
|>>> p3 = re.compile(r'(foo)bar\1')
|>>> s1 = 'foobarfoo'
|>>> s2 = 'foobar\\1'
|>>> print(p1.search(s1))
|<re.Match object; span=(0, 9), match='foobarfoo'>
|>>> print(p2.search(s1))
|None
|>>> print(p3.search(s1))
|<re.Match object; span=(0, 9), match='foobarfoo'>
|>>> print(p1.search(s2))
|None
|>>> print(p2.search(s2))
|<re.Match object; span=(0, 8), match='foobar\\1'>
|>>> print(p3.search(s2))
|None
|>>>
So use '\1' instead of '\\1' in the raw string.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We used to select the rpi-userland to make the vcdbg tool work but it
conflicts with the use of mesa. It implies we can not install vcdbg with
mesa libraries but it is false. We could use the prebuilt libraries from
the rpi-firmware sources to run vcdbg.
This patch removes the select dependency of rpi-userland package and
installs the prebuilt libraries needed by vcdbg only if rpi-userland
is not selected.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Bryce Schober <bryce.schober@gmail.com>
Tested-by: Bryce Schober <bryce.schober@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version adds support for openmpt, pipewire and snapcast, which are
disabled for now.
It also adds support for a choice between pupnp and npupnp for the UPnP
database. Therefore, the UPNP option is converted into three-value
choice in Config.in. Legacy handling of the BR2_PACKAGE_MPD_UPNP makes
sure that upnp remains selected.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[Arnout: fix legacy handling; fix snapcast option]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Drop patch (already in version)
- Update hash of bsd-comp.c, ccp.c and passprompt.c (no change in
license)
- rp-pppoe has been renamed to pppoe since
b2c36e6c0e
- Manage EAP-TLS which depends on openssl and has been added and is
enabled by default since
e87fe1bbd3
It should be noted that openssl is still mandatory with glibc because
encrypt and setkey have been removed since version 2.28 (see commit
b519bcafe7)
- musl is now supported
- Update indentation in hash file (two spaces)
https://github.com/paulusmack/ppp/blob/2.4.9/README
Fixes:
- https://bugs.busybox.net/show_bug.cgi?id=13436
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As stated on www.pcre.org:
You can download the current release of the PCRE2 library from its
official home on GitHub
[...]
Note that the former ftp.pcre.org FTP site is no longer available.
Update _SITE URL to the official home on Github.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[yann.morin.1998@free.fr: use Github, not SourceForge]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Check typo in define to detect SMAKE_LINUX_CONFIG_FIXUPS in smack
(fixed by 41e2132fbe)
The new expression will catch "SMAKE_CONF_OPTS" as well as
"define SMAKE_LINUX_CONFIG_FIXUPS"
Two modifications were made:
- add (define\s+)? which will match "define " but also an empty value.
Thanks to this, the second group will always contain the variable
name.
- remove \s*(\+|)= which seems superfluous
Also, add GCC_TARGET in ALLOWED variable to avoid the following
warnings:
arch/arch.mk:12: possible typo: GCC_TARGET_ARCH -> *ARCH*
arch/arch.mk:13: possible typo: GCC_TARGET_ABI -> *ARCH*
arch/arch.mk:14: possible typo: GCC_TARGET_NAN -> *ARCH*
arch/arch.mk:15: possible typo: GCC_TARGET_FP32_MODE -> *ARCH*
arch/arch.mk:16: possible typo: GCC_TARGET_CPU -> *ARCH*
arch/arch.mk:17: possible typo: GCC_TARGET_FPU -> *ARCH*
arch/arch.mk:18: possible typo: GCC_TARGET_FLOAT_ABI -> *ARCH*
arch/arch.mk:19: possible typo: GCC_TARGET_MODE -> *ARCH*
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Back in 2013, a github download helper has been introduced to cope with
changes in github download-URL's [1][2].
Since then a testing infrastructure has been introduced in Buildroot
but no tests has been added to check if the github download helper is
still working.
It was reported recently [3] that the github helper doesn't work anymore
using tags. Buildroot is not the only project having the issue, see
Github feedback discussions [4].
Add tests for direct archive download (archives uploaded by maintainers),
download from a git tag and git hash using the github helper.
Make sure that Buildroot doesn't use BR2_BACKUP_SITE
(http://sources.buildroot.net).
[1] https://bugs.busybox.net/show_bug.cgi?id=6302
[2] c7c7d0697c
[3] https://bugs.busybox.net/show_bug.cgi?id=14396
[4] https://github.com/github/feedback/discussions/8149
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The following are runtime dependencies for host-python-requests:
host-python-certifi
host-python-charset-normalizer
host-python-idna
host-python-urllib3
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A host variant of the python-urllib3 package will be needed for the
host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A host variant of the python-idna package will be needed for the
host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A host variant of the python-charset-normalizer package will be needed
for the host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The message attribute does not exist in python3, see PEP-0352:
https://www.python.org/dev/peps/pep-0352/
Fixes:
Traceback (most recent call last):
File "utils/scanpypi", line 743, in <module>
main()
File "utils/scanpypi", line 693, in main
if 'buildutils' in err.message:
AttributeError: 'ImportError' object has no attribute 'message'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux kernel version to 5.15.4.
We enlarge the boot partition to follow the kernel image size increase and
update the documentation.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Reviewed-by: Dick Olsson <hi@senzilla.io>
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LIGHTTPD_AUTORECONF=YES was added on master, but the package was changed to
build with meson on next, so this doesn't do anything any more.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop upstreamed patches
- change the location of polkit.its and polkit.loc to match their
new locations.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A library to control commonly available 64x64, 32x32 or 16x32
RGB LED panels with the Raspberry Pi. Can support PWM up to
11Bit per channel, providing true 24bpp color with CIE1931
profile.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Arnout: reorder build/install hooks inside conditions]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Drop second to fifth patches (already in version)
- License is ISC since version 5.6.2 and
eda734a8ba
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No functional changes, code is just moved around. Ordering is based on
the name of the Buildroot option being tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If systemd is available at configure time, the inadyn configure script
detects it and generates the unit file.
Also, the local unit file had the wrong absolute path to the binary.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to version 3.1.2 by:
- requiring BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 instead of _4_8 in this
package taking care of reverse dependencies, since now harfbuzz requires
gcc 4.9 to be built successfully.
- local patch is still necessary since upstream harfbuzz points the problem
to meson itself.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
$(HOST_DIR)/bin/python symlink is only created when
BR2_PACKAGE_PYTHON3 is set.
When only host-python3 is used this symlink is not present and build fails
with:
-- Python checking for Python version 2.7 or greater
-- Python checking for Python version 2.7 or greater - unknown error
--
-- Python checking for Mako templates 0.4.2 or greater
-- Python checking for Mako templates 0.4.2 or greater - unknown error
--
-- Python checking for requests 2.0 or greater
-- Python checking for requests 2.0 or greater - unknown error
--
-- Python checking for numpy 1.7 or greater
-- Python checking for numpy 1.7 or greater - unknown error
--
-- Configuring LibUHD support...
-- Dependency Boost_FOUND = TRUE
-- Dependency HAVE_PYTHON_PLAT_MIN_VERSION = FALSE
-- Dependency HAVE_PYTHON_MODULE_MAKO = FALSE
This patch set explicitly PYTHON_EXECUTABLE to $(HOST_DIR)/bin/python3
This is a fallout from e9df5b0fc3, which
changed uhd to always use host-python3.
Fixes:
- http://autobuild.buildroot.net/results/35c0b9597c75dade241a3b3786fae30551c48008
- http://autobuild.buildroot.net/results/89069102bf8785ce8a9ec3b4c6fa32749c2e3586
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
$(HOST_DIR)/bin/python symlink is only created when BR2_PACKAGE_PYTHON3 is
set.
When only host-python3 is used this symlink is not present and build fails
with:
-- User set python executable buildroot/output/host/bin/python
-- Found PythonInterp: buildroot/output/host/bin/python (Required is at least version "2.7.6")
CMake Error at cmake/Modules/GrPython.cmake:40 (if):
if given arguments:
"VERSION_EQUAL" "3"
Unknown arguments specified
Call Stack (most recent call first):
CMakeLists.txt:368 (include)
-- Configuring incomplete, errors occurred!
This patch set explicitly PYTHON_EXECUTABLE to $(HOST_DIR)/bin/python3
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-python-six needs host-python (aka python2) but since
commit e9df5b0fc3 python-mako is
python3 only. python-six is build using python2 and python-mako with
python3 and gnuradio build fails with:
-- Python checking for python >= 2.7
-- Python checking for python >= 2.7 - found
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 3.10.0 libgeos needs toolchain with threads support.
So add it to BR2_TOOLCHAIN_HAS_THREADS comment list.
libgeos depends on BR2_INSTALL_LIBSTDCPP, so add it to
BR2_INSTALL_LIBSTDCPP comment list.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch updates syskogd to v2.3.0 and drops the redundant .md5 hash.
The upstream sha256 should be sufficient.
Major features and fixes relevant to Buildroot include:
- UNIX 2038 assert fixes for 32-bit time_t systems
- logger support for logging to kernel ring buffer
- Persistent DNS lookup failure for remote syslog servers
For details, see the ChangeLog or the GitHub releases page:
https://github.com/troglobit/sysklogd/releases/tag/v2.3.0
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bump is mainly to fix the header file nameclash problem with LiTE,
in package/lite. See the libite project's README for how to adapt to
this change, and the ChangeLog for details. In short, libite now use
the /usr/include/libite/*.h prefix.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This addresses the autobuilder failure for master as per 2021-11-27.
The root cause was a name clash in a dependency, the libite library,
clashing with the DirectFB LiTE library header files. Hence, this
update alone does not fix [1], libite also needs to be updated. To
provide a smooth transition though, watchdogd should be updated first.
[1]: http://autobuild.buildroot.net/results/185c753af2aa159b494b13f78b0826dddbe4aed6
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
aa76b22 release version 15
dd49fec util: Fix warn_unused_result build warnings
6ba2b4d image-hd: more error output when bootloaders overlap with the partition table
90b83ba allow specifying 'holes' in the partition section
09fde2e [ci skip] typo "used used fill" -> "used to fill"
b0d794c image-flash: don't ignore truncate errors except ENOENT
93d1f26 .github: replace ubuntu-16.04 with ubuntu-18.04
1e9b9be util: systemp(): don't use shell defined in SHELL, but GENIMAGE_SHELL
1c53012 util: systemp(): use shell defined in SHELL rather than /bin/sh
89490b9 image-android-sparse: use off_t instead of int for lseek return values
f1cab39 test: add tests for --includepath
9e7f23a README.rst: reflow paragraph
0778817 add --includepath option
e210857 config.c: remove redundant helper add_opt()
18b3cfd config.c: allow hiding specific command line options from --help
65548f6 config.c: remove unused member cmdlineopt
f606a33 util: remove unused pad_file function
62e1d4f image-flash: use insert_image instead of pad_file
8c0fe58 image-ext2: use insert_image instead of pad_file
7d0003b util: insert_image: allow specifying the fill value
b847f3e image-hd: resize the image to the final size at the begining
8e3bf8b test: hdimage: check the disk usage of the second image as well
e2bd4c3 test: handle new genext2fs and e2fsprogs versions
06ac16e insert_image: fix read/write loop
17e2c3c test: filter 'rauc info' output for newer distros
1d72d80 image-hd: stricter option handling
d912549 image-hd.c: make GPT backup handling a little less special
69f6644 add test for partitions out of order
9190a2b image-hd.c: correct computation of first_usable_lba
8505aed image-hd.c: switch to insert_image() instead of pad_file()
5cc31c6 image-hd.c: truncate output file before looping over partitions
2194e31 image-hd.c: replace use of pad_file() with extend_file()
5638a9e util.c: add insert_image() helper
8eef854 test: add tests for "bootloader with holes allowing some overlap"
a72ca69 image-hd.c: take image holes into consideration when checking for overlap
564e359 document "file" image type and "hole" syntax in particular
998a118 image-file.c: allow specifying "don't care" regions
7f8f19d image-hd.c: fix missing check for overlap with GPT table
e91c8e2 image-hd.c: check all partitions for overlap
44d5346 image-hd.c: allow partitions to appear out-of-order
cd3ceac image-hd.c: ensure an autoresize partition has a size consistent with its alignment
0a61f64 README.rst: add description of how default align/size/offset are computed
efaae46 test: fix copy/paste error in the test refactoring
086380a config: don't try to access non-existent section
fe74ea1 image-vfat: drop '-b' from mcopy
7ef351d test: factor out some test data generation
94af174 image-hd.c: fix extended partition with offset
649602b image-hd.c: prepare for fake partitions
cc13e78 image-hd.c: don't sanity check partition_type_uuid for !part->in_partition_table
5f53df3 image-hd.c: move overlap check below partition size determination
b77f38b image-hd.c: allow specifying minimum size for auto-resize partitions
5f07c1c image-hd.c: do not require the autoresize partition to be specified last
8269fa7 image-hd.c: enforce proper alignment of all partitions
5bd7283 image-hd.c: ignore in-partition-table when the image has no partition table
3e2b616 image-hd.c: always sanity check child->size v part->size
fa619fb image-hd.c: separate computation of part->offset from the sanity checks
030e7a3 allow each partition to have its own align value
cf192fd image-hd.c: fix computation of autoresize size
d6c477c image-hd.c: don't lazily initialize now
6cbbf86 README.rst: document default value of in-partition-table option
e43e02e test: add some tests for overlap of GPT
11f3528 image-hd.c: refactor updating chs values
8c74183 image-hd.c: add and use "struct mbr_tail"
9ffd5e0 add macro for compile-time assertions
9e59a27 change insert_data() to take const void* instead of const char*
bcd7fa6 util: strtoul_suffix: allow s suffix for sector size (512 bytes)
41d77c4 image-hd.c: fix copy-pasto access of random memory
5dc2e22 list.h: drop prefetch()
be29822 image-rauc: add intermediate option
344416f util: add save string concat with formated string
351d50e image-rauc: ensure clean-up on rauc_generate() exit
5cba95c image-rauc: free keyringargs after use
23adab0 image-ext: ensure size is always interpreted as kilobytes
8014c7e .github: run apt-get update to update package cache
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a substantial update as the last time the midori version was bumped
was on Fri Apr 29 2016 commit 54bbd88b1f.
Changes:
package/Config.in: Move midori out of the "X applications" submenu and into
the "Graphic applications" submenu, as it is not dependent on X.
- Drop the two existing patches as they no longer apply.
- 0001-disable-vala-fatal-warnings.patch: new patch. This patch fixes
errors when building midori in a buildroot source repository that is also
a git project.
- 0002-add-option-to-specify-path-to-g-ir-compiler.patchL new patch.
This patch introduces a new option that allows the make system to specify
a path to the g-ir-compiler, or else the host path's g-ir-compiler is used
which results in failed builds.
- Change the site to the github repository, as that is where the latest
releases are published.
- New dependencies: gobject-introspection, json-glib, libarchive, and libpeas.
- gcr is no longer an optional dependency.
- host-python3 is now a mandatory dependency.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
midori 9.0 requires libpeas.
Lua and python loaders are disabled since they have not been tested.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enable introspection when GObject Introspection is enabled.
Midori 9.0 requires webkitgtk built with gobject-introspection
support.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This board is now supported by mainline u-boot and Linux. For U-Boot we
unfortunately still need a patch as the available (<rev A2) boards do not
have an identification eeprom, causing boot failures.
Use the workaround patch by Robert Nelson also used by the official bb.org
builds.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mkeficapsule U-Boot tool can be used to generate UEFI capsule binaries.
Add an option to cross-build it and install it to the target filesystem.
Also, build it and install it unconditionally to the host dir.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Matt Weber <matthew.weber@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes parse error when calling 'smcrouted -N' with a config file that
has 'mrdisc' disabled for one or more interfaces. Multicast router
discovery (mrdisc) is enabled by default in Buildroot.
See the ChangeLog, or release notes at GitHub, for more information:
https://github.com/troglobit/smcroute/releases/tag/2.5.5
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The project URL returns 404 error because:
Quoting Coling King:
"Unfortunately when I left Canonical last week they removed my tarballs"
So use github and update hash.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop python2 support.
Remove python3-markupsafe host build as python2 host builds for
markupsafe are not supported, python3 host builds are moved to
python-markupsafe.
Remove python3-jinja2 host build as python2 host builds for
jinja2 are not supported, python3 host builds are moved to
python-jinja2.
Remove python3-mako host build as python2 host builds for
mako are not supported, python3 host builds are moved to
python-mako.
Propagate reverse python3 dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Make wpewebkit support color management if the lcms2 package
has been selected.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to a new major release which brings in improvements and a number
of new features. Release notes:
https://wpewebkit.org/release/wpewebkit-2.34.0.htmlhttps://wpewebkit.org/release/wpewebkit-2.34.1.html
Some of the new features require additional dependencies: HTTP/2
requires libsoup3, which is not yet in packaged in Buildroot, and
disabled at the moment (with -DUSE_SOUP2=ON, to keep using libsoup2);
and the color management support needs LCMS2 (which will be enabled
in a follow-up patch.)
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Remove patch (already in version)
- Change URL to Github releases
- Hash of the license file changed due to a copyright year update
Signed-off-by: Ivan Maidanski <ivmai@mail.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
44afb75 Add configure options to disable progress bar
fdbd111 Improve warnings from probing for double buffering
f5203fd Update mailing list details since the move to groups.io
0a902f7 Fix psplash-systemd failures
4cf1330 Remove generated psplash-poky-img.h
aea172a Makefile.am: Fix out of tree builds
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This removes the hard dependency on readline which is GPL-3.0+ licensed.
If readline is enabled the dependency is added and nmcli is built.
Signed-off-by: Moritz Bitsch <moritz@h6t.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add allowed notations section for genimage.cfg files by specifying the
accepted suffix or prefix. Note that "K" has been decided to specify
KiloBytes as 1024 bytes. This has been done because in Buildroot the 90%
of the cases were using "K" and not "k".
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Option "offset = 12288K" must be "offset = 12M" according to the new
guidelines specified in Buildroot Manual with previous patch.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As requested/suggested by Sergey Kuzminov([1]) move the qt5gui select from
qt5declarative to qt5quick.
The qt5declarative (without qt5quick) compiles and installs fine without
qt5gui enabled and code inspection of the qt5declarative souce package *.pro
files shows the unconditionally gui dependencies only in for doc-snippets
and/or test projectes or real the qt5quick moduls.
[1] https://lore.kernel.org/buildroot/6fd05f97-7fb9-96d8-cca0-5063be8ad620@gmail.com
Reported-by: "Кузьминов Сергей" <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mxml 3.3 is a bug fix release. Changes include:
- Cleaned up usage of free throughout the library
- Added more error handling to the library
- Fixed potential memory leak in mxmlLoad* functions
- Fixed mxmlSaveString with a buffer size of 0
- Fixed MXML_MINOR_VERSION value in "mxml.h"
- Fixed POSIX threading support for MingW
- Fixed some minor memory leaks found by Coverity.
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bug fixes release.
Update README hash for version update.
Update comment; we do not patch configure.in.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- in case libcap is enabled use the now enabled '-u' option to run nptd as
user/group ntp
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The heuristic to extract the various variables of interest is pretty
crude: we filter on variables ending with certain suffixes (like
'%_VERSION' to get the version strings).
However, in doing so, we may dump variables that are not actual package
versions (especially with br2-external trees), and those may contain one
or more equal sign. And anyway, an actual package version string may
very well contain an equal sign too.
But the current situation is that the output of 'printvars' is split on
all equal signs, which will not fit in the 2-tuple we assign the result,
thus causing an exception.
Fix that by limiting to a single split.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Raspberry-Pi Zero 2 W is an affordable single board computer. It is
a more powerful drop-in replacement for the Raspberry Pi Zero W.
The board incorporates an Raspberry-Pi RP3A0 system-in-package (SiP) with
a Broadcom BCM2710A1 and 512MB LPDDR2 SDRAM. The CPU is a quad-core 1Ghz
64-bit Arm Cortex-A53. As for other Raspberry-Pis it also provides
2.4GHz 802.11 b/g/n Wifi, Bluetooth 4.2 and BLE.
The BCM2710 cpu is similar to the Raspberry-Pi 3, it uses the same
kernel configuration as the Raspberry-Pi 2 and 3.
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
[Based on https://patchwork.ozlabs.org/project/buildroot/patch/20211030213600.3445223-3-julien.grossholtz@openest.io/
- reformat genimage-raspberrypizero2w.cfg according to the beautify patch-set
- update kernel version to 9878a11 (5.10.78)
- use new bcm2710-rpi-zero-2-w dtb
- update commit log about kernel config (RPi2/3)
- add DEVELOPERS entries for Julien
]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add missing dtb files:
- bcm2708-rpi-cm.dtb from genimage-raspberrypi.cfg
- bcm2708-rpi-zero.dtb from genimage-raspberrypi0.cfg:
- bcm2708-rpi-zero-w.dtb from genimage-raspberrypi0w.cfg
- bcm2710-rpi-cm3.dtb from genimage-raspberrypi3.cfg
- bcm2837-rpi-3-b.dtb from genimage-raspberrypi3-64.cfg
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog (since 883b726):
- 3e020f7 Add 43436S firmware
Future Zero 2 W boards will have an alternative version of 43436
that should have different firmware, named brcmfmac43436s-sdio.
- 3888ba2 Merge pull request #18 from HiassofT/43436S
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog (since 883b726):
- 3e020f7 Add 43436S firmware
Future Zero 2 W boards will have an alternative version of 43436
that should have different firmware, named brcmfmac43436s-sdio.
- 3888ba2 Merge pull request #18 from HiassofT/43436S
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog:
kernel: Bump to 5.10.78
kernel: VC4 PixelValve and HDMI Drivers Locking Improvements for 5.10
kernel: Bump to 5.10.77
kernel: dtoverlays: Update all image sensor overlays for Media Controller option
kernel: drm/vc4: Add support for non-standard modes in VEC
kernel: Bump to 5.10.76
kernel: Bump to 5.10.75
firmware: video_decode: i/p port enable/disable without o/p active could stall
firmware: clock-2711: Limit PLLB VCO frequency to the high range
kernel: Bump to 5.10.74
kernel: ARM: dts: bcm2835_audio missing firmware reference
kernel: vcio rewrite
kernel: Bump to 5.10.73
kernel: Bump to 5.10.71
kernel: Bump to 5.10.69
kernel: Bump to 5.10.67
kernel: Bump to 5.10.66
kernel: Bump to 5.10.65
kernel: Bump to 5.10.64
kernel: Enable driver for RTL8111H used in cm4 carrier boards
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: actually fill-in the changelog]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- put a DB9F cable into the UART1 Port and connect using a terminal
emulator at 115200 bps, 8n1;
- power on the board.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
